Peace Of Mind POMT3 Instructions / Assembly

PEACE OF MIND THRESHOLD RAMP
For Wheelchairs and Scooters
FOR YOUR SAFETY PLEASE READ
•Maximum weight limit is 800 pounds
•Read and follow all instructions before use
•Do not use if ramp is damaged or unstable
It is important to refer to your equipment’s (wheelchair or scooter) user guide for the proper degree of incline
or decline. Never exceed user guide recommendations.
Packaged as follows:
The POM Threshold Ramp comes ready to assemble in the following heights: 3 inches, 4 inches, and 6
inches. Parts will vary depending on the size purchased.
Part #POMSP
Starter Plank
Part #POMMP
Main Plank
Part #POMTP
Top Plank
See reverse side for assembly instructions
Questions or concerns about your product?
Contact: American Access, Inc.
Phone: (888)-790-9269
www.aaramps.com
Part #P(X)L
Leg
(X=2,3,4,5 or 6” Leg)
Assembly Instructions
Figure to the right illustrates a
completed POM Threshold
Ramp with a
6 Inch rise.
Step 1. Begin with part #POMSP and insert part
#POMMP along the groove.
PEACE OF MIND THRESHOLD RAMP
For Wheelchairs and Scooters
Big blown up diagram
Step 2. While holding #P(X)L parallel to #POMMP, line up the
2 molded lips of #P(X)L with the 2 grooves of #POMMP and
slide #P(X)L into the grooves. Repeat this process until all
#P(X)L and #POMMP have been fit together. POMMP
POMMP
Detail View:
Item P(X)L inserted
into item POMMP
POMSP
P(X)L
POMMP
POMSP
Step 3. (Optional) Add part #POMTP for use in
securing your POM ramp to a threshold surface.
POMTP
POMMP
INSERT
Step 4. Before securing screws make sure #POMMP and
#SXL are flush so that the holes align. Using a Philips’ head
screwdriver tighten the enclosed screws into the pre-drilled
holes in each #POMMP. (NOTE: use 3/8” screw on #POMSP Part)
Download PDF
Similar pages
Peace Of Mind POMPF4 Instructions / Assembly
DMC TSC-34/U-L Specifications
AG Neovo TSC-40/IC User's Manual
Leased line - sync.