2014 Products Overview - RLH Industries Inc. Fiber Optic Link

RLH Industries, Inc.
2014
Products
Overview
2014A-0326
!
!
!
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
At RLH we engineer, manufacture, install and
service industrial fiber optic transmission
equipment, cabling and supplies.
RLH Industries, Inc.
Copyright © 2013 RLH Industries, Inc. All rights reserved.
No part of this document may be copied or distributed without permission.
The RLH logo may not be used for commercial purposes without the prior
written consent of RLH and may constitute trademark infringement.
Other company and product names mentioned herein are trademarks of
their respective companies. Mention of third-party products is for
informational purposes only and constitutes neither an endorsement nor a
recommendation. RLH assumes no responsibility for the performance or use
of these products.
The information contained in this document is the property of RLH
Industries, Inc. and may not be reproduced or disseminated to third parties
without the express written permission of RLH.
Every effort has been made to ensure that the information in this document
is accurate. RLH is not responsible for printing or clerical errors. Because we
are constantly seeking ways to improve our products, specifications and
information contained in this document are subject to change without
notice.
RLH Industries, Inc.
936 North Main Street
Orange,CA 92867
Ph. 714 532-1672
email: info@fiberopticlink.com
www.fiberopticlink.com
!
!
!
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Fiber only HVP.
From day one.
PERFORMANCE
COPPER CANT’ TOUCH
We didn’t just decide one day
to enter the fiber HVP market.
We pioneered it.
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
3
Compliance Information
RLH Fiber Optic Link Systems are compliant with one or more the following
industry standards:
4
•
FCC PART-68B
•
IEEE-80, IEEE-367
•
IEEE-487
•
IEEE-1590
•
IEEE-1615
•
Motorola R56
•
BR 876-310-100 BT (Telcordia)
•
Bellcore SR-3966
•
GR-1089
•
GR-63
•
ANSI T1.403
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Products Overview
Ethernet
•
•
•
•
•
4RU Card Housings
•
•
•
•
Fiber/Ethernet Switches
Managed and Unmanaged
1-48 Ports
10/100/1000
PoE
POTS (Analog Phone)
•
•
•
Line powered
Locally Powered
2 Channel Mux w/ Ethernet
Data
•
•
•
Serial Data (RS-232/422/485)
Analog
Contact Closures
4 & 8 Channels
4-Wire Data w/ Contact Closure
Equipment Rack Card Housings
NEBS Level 3 Card Housings
Fiber Cable Assemblies
•
•
•
•
•
•
•
•
•
•
Jumpers / Patch Cords
Distribution Cable
Tight Buffer Cable and Loose Tube
ADSS Cable
Tactical Cable and Connectors
T-1
Ethernet
POTS
Patch Panels
Wall Mount
DIN Mount
12-144 fibers
Splice trays
Enclosures
•
•
•
•
•
•
Multiplexers
•
•
•
•
Indoor and Outdoor Card Housings
Fiber Management
T1
Contact Closures
•
•
•
1 to 12 Card Housings
Cabinets & Pedestals
Aluminum
Galvanized Steel
Stainless Steel
Fiberglass
Wall or Pole mount
Serial Data
Power Supplies
•
•
•
•
•
•
•
Rack
Wall
DIN Mount
Solar
AC/DC
DC/DC
UPS Systems
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
5
Ethernet Products
RLH has industrial Ethernet switches and media converters for
just about any application. Our Ethernet Over Fiber products are
especially suited for extending the network for long distances up
to 74 miles (120km) over fiber optic cable. All of our products are
temperature hardened and ideal for critical, high voltage, remote
or un-manned locations that must remain operating 24/7/365.
From small, single port DIN/wall mount units to 48 port rack
mount managed switches suitable for medium/large enterprise
applications, RLH has an Ethernet solution for you.
Media Converters
Single Channel Fiber Link Cards
•
•
•
•
•
Line Powered
Temperature hardened
Available in 10/100M or Gigabit models
Card fits in any RLH card housing
Fiber distances up to 120km/74 miles
Gigabit Ethernet Media Converter
•
•
•
•
Temperature hardened
DIN/Wall mount
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
10/100M Slimline Media Converter
•
•
•
•
Temperature hardened
DIN rail mount
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
Power Over Ethernet Products
4+1 Port Ethernet Switch with PoE
•
•
•
•
•
Temperature hardened, DIN mount
Four 10/100M Ethernet ports with PoE
One fiber port
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
•
•
•
Temperature hardened, DIN mount
Five 10/100M Ethernet ports
PoE injection on four ports
5 Port Ethernet Switch with PoE
4+2 Port Ethernet Switch with PoE
•
•
•
•
•
Temperature hardened, DIN mount
Four 10/100M Ethernet ports with PoE
Two fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
DIN Mount Ethernet Switches
5 Port Ethernet Switch
•
•
•
Temperature hardened
SlimLine DIN mount
Five 10/100M Ethernet ports
3+2 Ethernet Fiber Switch
•
•
•
•
•
•
6
Temperature hardened
SlimLine DIN mount
Three 10/100 Ethernet Ports
Two fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
4+1 Ethernet Fiber Switch
•
•
•
•
•
•
Temperature hardened
SlimLine DIN mount
Four 10/100 Ethernet Ports
One fiber port
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
4+4 Managed Ethernet Fiber Switch
•
•
•
•
•
Temperature hardened, DIN mount
Dual redundant power inputs
4 10/100 UTP Ports, four 1x9 fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Rack Mount Ethernet Switches
12+12 Managed Ethernet Fiber Switch
•
•
•
•
•
•
1RU 19” rack mount chassis
Internal 110/220VAC power supply
12 RJ-45 Ethernet ports
12 1x9 fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
16+8 Managed Ethernet Fiber Switch
•
•
•
•
•
•
1RU 19” rack mount chassis
Internal 110/220VAC power supply
16 RJ-45 Ethernet ports
8 1x9 fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
20+4 Managed Ethernet Fiber Switch
•
•
•
•
•
•
1RU 19” rack mount chassis
Internal 110/220VAC power supply
20 RJ-45 Ethernet ports
4 1x9 fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
22+2 Managed Ethernet Fiber Switch
•
•
•
•
•
•
1RU 19” rack mount chassis
Internal 110/220VAC power supply
22 RJ-45 Ethernet ports
2 1x9 fiber ports
Dual fiber and single fiber models
Fiber distances up to120km/74 miles
•
•
DIN/Wall mount
Converts single mode to multimode and
vice versa.
Mode Converter
Gigabit Mode Converter
•
•
Temperature hardened
Ideal for critical, high voltage, remote or
un-manned locations that must remain
operating 24/7/365
POTS Products
RLH has industrial POTS systems that provide transmission of
standard analog phone, telemetering, or PBX loopstart signals
over two optical fibers. The system transmits in the voicefrequency or audio range (300Hz-3.4KHz) while providing ringing
and off-hook detection. Our POTS products are temperature
hardened and especially suited for extending the network for
long distances up to 74 miles (120km) over fiber optic cable.
Fiber Link Systems
2 Wire POTS Fiber Link Card
•
•
•
•
2 Ch. POTS w/ Ethernet
Temperature hardened
Fits any RLH card housing
Fiber distances up to 60km/37 miles
Single or multimode models
•
•
•
•
•
Temperature hardened
Fiber Link Systems are available in card
or DIN models
Fiber distances up to 120km/74 miles
2 integrated 10/100 Base-T Ethernet
ports for LAN interconnection or VOIP
Single or multimode models
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
7
Data Products
RLH has industrial Fiber Link systems that provide transmission
of standard data signals from copper over to two optical fibers
for just about any application. Our Data products are especially
suited for extending the network for long distances up to 74
miles (120km) over fiber optic cable. All of our products are temperature hardened and ideal for critical, high voltage, remote or
un-manned locations that must remain operating 24/7/365.
Fiber Link Cards
2-Wire Data
•
•
•
Universal 2 or 4-Wire HDSL Card
24~56VDC local power or
(CO side) line powered
Constant bi-directional transmission
SC or ST, single or multimode options
2-Wire Digital Phone
•
•
Utilizes 24~56VDC local power
SC or ST, single or multimode options
2-Wire DID
•
•
•
24~56VDC local power or
(SUB side) line powered
Reverse battery switching
SC or ST, single or multimode options
2/4W Analog Data
•
•
•
NEBS Level 3
Line powered or 24~56VDC local power
SC or ST, single or multimode options
4-Wire Data w/ Contact Closure
•
•
•
•
Temperature hardened
Fiber Link Systems are available in card or
DIN models
Simultaneously transmits 4 Wire data and
contact closure over fiber.
Single or multimode models
4-Wire Data w/ E&M
•
•
•
Full duplex, constant transmission
Line powered or 24~56VDC local power
SC or ST, single or multimode options
4-Wire 9.6Kbps DDS Card
•
•
•
•
8
500 Hz to 50 kHz bandwidth
2.4 kbps to 9.6 kbps data rate
Line powered or 24~56VDC local power
SC or ST, single or multimode options
•
•
•
•
HDSL1, HDSL2 or HDSL4 compatible
CO side is line powered
SUB side is 44~56VDC local power
SC or ST, single or multimode options
4-Wire 56k
•
•
•
•
•
NEBS Level 3
1 kHz to 300 kHz bandwidth
19.2 kbps to 64 kbps data rate
Line powered or 24~56VDC local power
SC or ST, single or multimode options
2 Channel ADSL
•
•
•
•
ADSL data rate compatibility up to
2.75Mbps
requires 44~56VDC local power
SC or ST, single or multimode options
LED status indicatorsc
T1/E1
•
•
•
•
1, 2 or 4 channels of T1 over fiber
Line powered or 24~56VDC local power
SC or ST, single or multimode options
LED status indicators
RS-232 Serial Data Card
•
•
•
•
•
•
Connects directly to DB-9 connector
Half or full duplex operation
Utilizes 24~56VDC local power
SC or ST, single or multimode options
LED status indicators
Loop capability for remote testing
RS-232/422/485 Serial Data
•
•
•
•
•
Auto sensing for RS-232/422/485 data
Supports up to 32 nodes of
RS-485/422 devices
Manufactured to ISO-9001 standards
Powering requires 12-24VDC 1A
Single or multimode fiber
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
DIN Fiber Link Systems
2 Channel T1 Mux
•
•
•
•
RS-232 Serial Data (DB-9 Connector)
Provides simultaneous multiplexing and
de-multiplexing of two asynchronous
T-1 channels
Frame and fault LED indicators
Line powered or 24~56VDC local power
SC or ST, single or multimode options
2/4-Wire Data w/ E&M
•
•
•
•
•
•
•
Auto sensing for RS-232 data
TIA/EIA-574 compliant
Uses 5VDC @ 1A, 115/220VAC, 24 and
48VDC power adapters available
SC, ST or FC connectors
Single or multimode fiber
RS-232/422/485 Serial Data
E&M wet or dry contact input options
Full duplex, constant transmission
Line powered or 24~56VDC local power
SC or ST, single or multimode options
2 Channel 2/4-Wire Data w/ E&M
•
•
•
•
•
•
•
Data w/ E&M contact closure function
Includes a single 10/100M Ethernet port
Full duplex, constant transmission
12-24VDC, 24-48VDC, 115/240VAC or
130VDC models
SC or ST, single or multimode options
•
•
•
•
•
•
Auto sensing for RS-232/422/485 data
Supports up to 32 nodes of
RS-485/422 devices
Manufactured to ISO-9001 standards
Powering requires 12-24VDC 1A
SC, ST or FC connectors
Single or multimode fiber
Contact Closures
RLH has industrial Contact Closure Fiber Link systems that provide electrical-to-optical interface transmission of digital or analog signals for just about any contact closure or alarm application. Our control monitoring, alarm system products are especially suited for extending the signal for long distances up to 74
miles (120km) over fiber optic cable. All of our products are temperature hardened and ideal for critical, high voltage, remote or
un-manned locations that must remain operating 24/7/365.
Fiber Link Systems
4 & 8 Ch. Contact Closure
•
•
•
•
4 Channel 4~20mA Card
Temperature hardened
Fiber Link Systems are available in card
or DIN models
Fiber distances up to 47km/29 miles
Single or multimode models
4 Wire Data with Contact Closure
•
•
•
•
•
•
•
•
•
Temperature hardened
22~56VDC local power
Available with 6~9VDC powering option
SC or ST, single or multimode options
Fiber Link Systems are available in card
or DIN models
Temperature hardened
Fiber Link Systems are available in card
or DIN models
Simultaneously transmits 4 Wire data
and contact closure over fiber.
Single or multimode models
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
9
iMux Modular Multiplexer System
RLH has industrial Multiplexer systems that provide transmission
of multiple services over fiber for any a variety of applications.
Our multiplexers are especially suited for extending the signal for
long distances up to 74 miles (120km) over fiber optic cable. All
of our products are temperature hardened and ideal for critical,
high voltage, remote or un-manned locations that must remain
operating 24/7/365.
Customize complete multi service rack systems suitable for
medium/large enterprise applications . RLH has a multiplexer
with service solutions for you.
Applications Include:
•
•
•
•
•
•
Maximize services over minimal fiber
Telephone services
Data services
VLAN
VOIP systems
Web management
Rack Mount System
iMux Multiplexer
•
•
•
•
10
Low profile 1RU 19“ rack mount
Up to 16 channels of Serial Data
Up to 4 modules (4 ports each)
mix and match
options include RS-232/422/485, T1, E1,
2/4 Wire Data, Analog phone or V.35
•
•
•
•
Dual or single bi-directional fiber models
Hot swappable, 1+1 protected optical
modules
Managed through software, web interface
or front panel
Integrated 115VAC or 38VDC power
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
4RU Plug-in Card Housings
All RLH Fiber Optic Link Cards are designed to be installed directly into housings or shelf systems. RLH Housings are specially
suited to accommodate the entire line of RLH Fiber Optic Link
Cards, providing physical protection, electrical isolation, and
access to connectors and system LEDs.
Housings are available in many configurations, from low cost,
single card, indoor housings suitable for equipment closets or
weatherproof cabinets, to high density multi-card shelves in alldielectric housings especially well suited for high voltage isolation
applications.
RLH Enclosures and cabinets are a perfect match for Fiber Optic
Link housings, and are available in many configurations. Indoor
housings and shelves may be mounted outdoors if located in
weatherproof cabinets.
Applications Include:
•
•
•
Wall/Pole/Rack mount
Indoor or Outdoor
Remote locations
DIN & Rack Mount Housings
Single Card DIN Housing
•
•
•
Rack Mount Housings
Powder coated steel construction with
DIN clip
Slide out, front access to card and fiber
Adjustable mounting ears
•
•
•
•
1 up to 4 card housings
Available in 1RU or 2RU
Powder coated steel construction
Available with 24 or 48VDC powe
Indoor & Outdoor Card Housings
Single Card Housing (Indoor)
•
•
•
Four Card Housing (Indoor/Outdoor)
Thermoplastic construction
Wall mount
Available as pre-installed unit
Single Card Housing (Indoor/Outdoor)
•
•
•
Weatherproof thermoplastic construction
Wall or pole mount
Available as pre-installed unit
Dual Card Housing (Indoor/Outdoor)
•
•
•
Vented weatherproof plastic construction
Wall or pole mount
Available as pre-installed unit
•
•
•
•
Lockable cover
Vented weatherproof plastic construction
Wall or pole mount
Available as pre-installed unit
Mini Interface Unit (Indoor/Outdoor)
•
•
•
•
•
Durable vented weatherproof
fiberglass construction
3/4” treated mounting backboard
Lockable cover
Wall or pole mount
Available as pre-installed unit
NEBS Level 3 Card Housings
5, 8 and 12 Card Housings
•
•
•
NEBS Level 3 compliant
Powder coated steel construction
Wall, cabinet, or rack mountable
•
•
Fiber spools and cable accessories
Available with terminal options &
integrated power supply
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
11
Power Supply Product Family
RLH has industrial power supplies ideal for powering RLH Fiber
Optic Link products and other industrial telecom and networking
equipment. Power products range from AC/DC, DC/DC, solar,
Power Over FIber, battery packs, complete uninterrupted systems and more. All of our products are temperature hardened
and ideal for critical, high voltage, remote or un-manned
locations that must remain operating 24/7/365.
From small, DIN/wall mount power supplies to high powered
rack mount units suitable for medium/large enterprise applications, RLH has an dependable power solution for you.
Applications Include:
•
•
•
•
•
•
•
Powering RLH Fiber Link products
Converting local power to equipment specifications
Redundant uninterrupted power solutions
Solar power in remote locations
Power Over Fiber
Power insertion
DC/DC converters
Fiber Link Card Power Systems
2 Wire/4 Wire Data Power Coupler
•
•
•
•
Insert DC power onto dry pairs for
SCADA and Audio Tone Protective
Relaying lines
Powers 2W and 4W CO cards
Uses 24 ~ 56VDC power
Fits standard RLH card housings
DC/DC Converter
•
•
•
•
•
DC input models from 24 ~ 130V
24 and 48VDC output models
48W to 67W models up to 2.2A
Powers up to 12 Fiber Link Cards
Fits standard RLH card housings
2 Wire POTS Coupler
•
•
•
Powers one RLH POTS CO Card
24 or 48VDC models
Fits standard RLH card housings
DIN Mount Systems
Dual Output DC/DC Converters
•
•
•
•
130VDC or 48VDC power input models
12VDC and 48VDC power output
Wide input tolerance range
Individual LED power indicators
UPS Charge Controller
•
•
•
•
12
75W 24V AC/DC Integrated UPS
•
•
•
•
Integrated power supply and battery
charge controller.
AC or DC power input
LED status indicators
Short circuit, overload, over voltage and
over temperature protection.
24VDC and 48VDC models
DC input up to 40A
Built-in battery test function
Relay contact signal output
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Rack Mount Systems
AC/DC Low Density Power Supply
•
•
•
•
•
19/23” rack mount, 1RU
24 and 48VDC output models
24W to 35W models up to 2A
Includes backup batteries
4 output terminals
Slimline DC/DC Converters
•
•
•
•
•
19/23” rack mount, 1RU
DC input models from 12 ~ 130V
12, 24, and 48VDC output models
24W to 35W models up to 6A
12 output terminals
AC/DC High Density Power Supply
•
•
•
•
•
•
19/23” rack mount, 2RU
24 and 48VDC output models
500W up to 42A
Auto switching dual input terminals for
redundant power
Digital LED ammeter
3 output terminals
Power Over Fiber
Solar Power Supplies
Power over Fiber Optic Cable
Solar Power Supplies
•
•
•
•
•
2RU Rack Mount transmitter
Fiber Link card receiver
Outputs 24VDC @ 25mA over fiber cable
LCD digital system display
Eliminates copper into GPR zone
•
•
•
•
10 ~ 300W panels available
12, 24 and 48VDC models
Easy-Mount with Quick-Tilt feature
Complete systems with charge controller
and up to 100Ah backup batteries
Battery Packs
UPS System Battery Packs
•
•
•
•
Solar Battery Packs
12, 24 & 48VDC output models,
up to 20Ah
Rack, DIN and Wall Mount models
Sealed gel batteries, field replaceable
User replaceable fuse
•
•
•
•
12, 24 & 48VDC output models,
up to 100Ah
indoor & outdoor models, with charge
controller
Sealed gel batteries, field replaceable
User replaceable fuse
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
13
Fiber Optic Cable Products
RLH carries an expanded variety of fiber optic cables available for both indoor and outside plant applications, offering the highest
quality cable from several of the industries leading manufacturers. Fiber cable can be ordered in large reels or small cut piece
quantities, and are available with factory installed connectors. Contact an RLH sales office for fiber cable types not listed, such as
armored, double jacket, figure-8, and hybrid cables.
Fiber Optic Cable
•
Distribution Cable (Indoor)
Distribution fiber cable is a compact tight buffered cable which contains no gel.
Each fiber strand has a color coded 900-micron jacket. The cable outer jacket
is also color coded for singlemode (yellow) or multimode (orange) type fiber.
Riser (OFNR) and Plenum (OFNP) rated cables are available.
For installation into a patch or distribution panel connectors can be installed
directly onto the 900-micron fiber. When the cable is connecting directly into
the end device a 2 or 3mm breakout kit is recommended.
•
Tight Buffer Cable and Loose Tube (Indoor/Outdoor)
Indoor/Outdoor fiber cable allows for installation flexibility by providing outside
plant ruggedness and UV protection, while maintaining fire ratings for indoor
use.
Tight buffer indoor/outdoor cables are available in both Riser (OFNR) and
Plenum (OFNP) rating.
•
Loose Tube - ADSS Cable (Outdoor)
Loose tube fiber optic cable allows for smaller diameter and higher strand
counts to be used in outside plant environments. The cable consist of one or
several gel filled tubes each containing 6-12 individual 250µm fiber strands
inside. Fiber strands can be directly spliced, or connectorized with the use of a
breakout kit.
Standard loose tube OSP fiber cable can be placed above or under ground
inside a conduit, aerially lashed, or in some cases direct buried. Nylon jacketed
loose tube cable offers additional chemical and rodent protection. ADSS (All
Dielectric Self Supporting) cable has an inner dielectric strength member and is
used in aerial applications without the need to be lashed to a steel messenger
wire. Typical ADSS Spans with 1.0% Installation Sag: NESC Heavy 275 ft (84
meters), NESC Medium 450 ft (137 meters), NESC Light 600 ft (183 meters).
RLH ADSS hardware is used to attach the cable.
14
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Fiber Optic Jumpers & Cable Assemblies
RLH Industries, Inc. provides fiber optic cable for indoor or outdoor use, as well as fiber optic cable with high fiber count for
use in outside plant applications. We manufacture fiber optic
cable assemblies to your specifications, which can be installed
with little or no fiber experience.
We manufacture fiber optic patch cords or jumpers used for
short distance patching applications. Our factory modification
program allows you specify the exact length, fiber type and connectors for your needs.
Standard Features:
•
•
•
•
•
•
•
•
Pre-terminated fiber optic strands from 1 to 156
All cable assemblies are 100% tested and certified
Single and multimode up to 100G (OM4)
ADSS, Loose Tube or Distribution Fiber Cable
Fire rated and tactical cable available
Individually numbered strands
Large selection of connectors to choose from
Kevlar pulling sheaths available over terminated ends
Tactical Fiber Optic Cable Assemblies & Connectors
RLH Industries, Inc. manufactures tactical fiber optic cable assemblies (T.F.O.C.A.).Tactical Fiber optic cables assemblies are
made for harsh environments where deployment and retrieval for
reuse is required and can be easily be installed with little or no
fiber experience.
Pre-terminated fiber assemblies provides a convenient and cost
effective engineering solution, high degree of reliability, and offers
an outstanding performance characteristics. Custom T.F.C.O.A’s
can be made with any military style connector and strand count
contact us for more information.
Standard Features:
•
•
•
•
•
•
T.F.O.C.A. that meet D.O.D. and MIL specifications
Pre-terminated fiber optic strand counts from 2 to 24
All cable assemblies are 100% tested and certified
Customized Military fiber assemblies and connectors
Individually numbered strands
Sized to any length
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
15
Fiber Management Products
Cables, Couplers, Attenuators and Splitters
Attenuators
Fiber Cables
•
•
•
•
Custom Cable Assemblies
Jumpers / Patch Cords
T.F.O.C.A.
Ruggedized Military connectors
Fiber Couplers
•
•
•
Single or Multimode, Simplex or
Duplex
Female to Female, Male to Female
ST, SC, LC and SMA
2x1 Couplers/Splitters
•
•
•
Combiner and Splitter
Single or Multimode
ST, SC, LC, FC/APC and SC/APC
•
•
•
•
-5, -10, -15 and -20dB Attenuation
Single or Multimode
Female to Female or Male to
Female
ST, SC, LC, FC and SC/APC
Loopbacks
•
•
•
Single or Multimode
Compact rugged design
Color Coded for identification
Mode Conditioning Cables
•
•
Eliminates any differential mode
delay
Available in a variety of connectors
Fiber Distribution Units (FDU’s)
Mini Wall Mount Plastic
Indoor/Outdoor Units
•
•
•
•
Preloaded w/ any connector
Single or Multimode
Simplex or Duplex
6 or 12 ports
Wall Mount Indoor Units
•
•
•
•
ST, SC, LC, MTRJ, SC/APC and
APC/SC Adapters
Single or Multimode
Simplex or Duplex
12-288 Fiber Ports Capacity
MTP/MPO Fiber Cassettes
•
•
16
12 and 24 fiber configurations
Single or Multimode
Wall/DIN Slimline FDU
•
•
•
•
Preloaded w/ any connector
Single or Multimode
Simplex or Duplex
Single adapter plate
Wall/Pole Mount Outdoor Units
•
•
•
•
•
Preloaded w/ any connector
Single or Multimode
Simplex or Duplex
12-288 Fiber Port Capacity
Weatherproof
ADSS Aerial Fiber Splice Case
•
12 up to 144 fiber capacity
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
ALU
GALVA
STAI
Both the aluminum and galvanized enclosures are
powder coated light gray and highly resistant to
corrosion. Stainless steel models come in a natural
stainless steel finish.
Aluminum
Aluminum enclosures set the standard for light
weight and durability, and galvanized steel
enclosures are a cost effective solution. Stainless
steel provides the ultimate in durability and
protection.
NEMA 4X Cabinets
Galvanized Steel
Stainless Steel
Aluminum,
galvanized,
stainless
commonly in stock
steel
STANDARD
SIZES: and fiberglass=construction
RLH Part No.
Outside H x W x D
Interior H x W x D
Aluminum enclosures set the standard for light
• X X X X weight
Xand
durability
X X X cost effective
• Galvanized
X steel
X enclosures
areX a
X solution
X X X X Stainless
X X X steel
provides
the ultimate
in durability
• X X X X X and protection
X X X X Fiberglass enclosures are light weight and can
• X X X X easily
customized
the field
be
X X in
X X standard
H18" xX W16"
to
• 23
X Xsizes
from
x D8"
X H60"
xXW36"
Xx
D16" X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X !
X X X X !
X X X X 34!.$!2$ &%!452%3
s 4OP AND BOTTOM VENTED .%-! 8 COMPLIANT
WEATHERPROOF DESIGN
s 0RECISION WELDED
HEAVYFeatures
DUTY CONSTRUCTION
Commercial
Grade
s &IRE TREATED AND PAINTED PLYWOOD
Top and bottom vented, NEMA 4X compliant,
•BACKBOARD
AND BOTTOM BASE BOARD
weatherproof design
s (INGED DOOR WITH ,IMIT 3TOP
Precision welded, heavy duty construction
s•.EOPRENE WEATHER TIGHT DOOR SEAL
Fire treated and painted
3/4" plywood backboard and
s•,ITERATUREDOCUMENT
POCKET
base
boardBAR TO S
s bottom
POSITION
GROUND
Hinged KNOCKOUTS
door with Limit
s•"OTTOM
Stop
TO s•7ELDED
PADLOCK
LATCH
Neoprene
weather
tight door seal
s•&RAME
MOUNTING
FEET
AND ATTACHING HARDWARE
Literature/document pocket
s 0OWDER
COATED
INDUSTRY
GREYwire clamps
to #14 AWG
• 8 position ground bar, #2APPROVED
s %XCLUSIVE LIFETIME WARRANTY
• Bottom knockouts, 3/4" to 4"
•
•
•
•
•
#ONTACT
2,( turn
FOR ADDITIONAL
INFORMATION
Quarter
security ORDERING
latches with
padlock ring
3PECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Frame mounting brackets and attaching hardware
!VAILABLE OPTIONS INCLUDE EXHAUST FANS WITH THERMOSTAT HEATER WITH
THERMOSTAT CUSTOM COLOR POWDER COAT LARGE OR SMALL CUSTOM SIZES
RACK MOUNT RAILS POLE MOUNT BRACKET WITH BOLT OR STRAP CAPABILITY
AND MORE #ONTACT US FOR DETAILS
RLH Industries, Inc.
WWWFIBEROPTICLINKCOM
936 N. Main Street
Orange CA 92867
tel 866 DO-FIBER
fax 714 532-1885
info@fiberopticlink.com
Powder coated industry approved grey
Exclusive Unconditional Lifetime Warranty
Available options include: exhaust fans with thermostat,
heater with thermostat, custom color powder coat, large
or small custom sizes, rack mount rails, pole mount
bracket with bolt or strap capability, and more.
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
17
Metal Cabinets
RLH metal cabinets provide long-lasting protection for housing
electrical components. The NEMA 4 aluminum, galvanized steel
or stainless steel units may be used in both indoor and extreme
outdoor environments. Our industrial cabinets are powder
coated light gray (except for the stainless steel versions), and are
highly resistant to corrosion. They are equipped with a hinged
door with pad lock latch, literature pocket, and foam gasket seal,
knockouts, vents, mounting feet, hardware, and painted plywood backboard.
Telco Interface Units with FIber Optic Link housings and prewired terminal blocks are also available.
Feature Options:
•
•
•
•
•
All styles come in 23 standard sizes
Heaters and fans with thermostat
Customized solutions
Aluminum or steel back mounting panels
Complete Turn-key solutions
PRODUCT
SPECIFICATIONS
FIBERGLASS CABINETS
RLH fiberglass
enclosures
are constructed
dielectric
molded
RLH
fiberglass enclosures
provide of
long-lasting
corrosionfiberglass-reinforced
materialfor
that
is easily
tailored on
the job
proof protection
electrical
components
in both
indoor
site, and mayand
be outdoor
punched,
drilled, filled,
or sawed.
Thecabinets
exteriorare
environments.
These
all-dielectric
surface is lightideal
gray
protection.
Fiberglass
cabinets
forwith
FiberUV
Optic
Link and Telco
equipment
locatedare
equipped with a hinged door with padlock latch, foam gasket
inside high voltage environments.
seal, vents, mounting feet, hardware, and painted plywood
Constructed
of fiberglass-reinforced
material,
they feature
backboard. RLH
Fiberglass
Enclosures provide
long-lasting
pro2” plywood
backboard,
venting, hasp
padlocking,
tection for housing
electrical
components,
andfor
can
be usedfoam
in
both indoor and
dooroutdoor
seal and environments.
doorstop*. They are ideal for quick job site
modification, and may be drilled, filled, punched or sawed
Telco Interface
Units
with FIber
Optic you
Linkneed
housings
preeasily
as needed.
Whether
to wall and
mount,
Hwired terminalframe,
blocks
are
also
available.
or pole mount your equipment, there is a rugged
RLH fiberglass cabinet to meet your needs.
DURABLE
ALL-DIELECTRIC
FIBERGLASS
Fiberglass Cabinets
MINI
SMALL
STANDARD
LARGE
Feature Options:
•
•
•
•
•
All hardware is provided for quick installation, and telco
23 standard sizes
versions with pre-wired Fiber Optic Link housings and
Heaters and fans with thermostat
copper or gas tube termination are also available.
Customized solutions
* mini fiberglass
not feature
door stop panels
Aluminum
ormodels
steeldoback
mounting
Complete Turn-key Solutions
Mini Fiberglass Cabinets
Part Number
Description
Dimensions
8806-1402-01
Mini Interface Enclosure
H18" x W16" x D10"
Small Capacity Fiberglass Cabinets
18
Part Number
Description
Dimensions
RLH-242010-F
Small Fiberglass Cabinet
H24" x W20" x D10"
8806-1280-01
Small Fiberglass Cabinet
H24" x W24" x D10"
8806-1450-01
Small Fiberglass Cabinet
H30" x W24" x D10"
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885
www.fiberopticlink.com
Note: Add•-PMK
to P/N to include the Accessory Pole Mount Bracket
Note: Add -EF to P/N to include Exhaust Fan with Thermostat
Note: Add -HWT to P/N to include Heater with Thermostat
Standard Fiberglass Cabinets
RLH Buried and Semi-Buried Pedestal enclosures, include plywood backboard, Lockable covers with hex head self-locking
system with padlock hasp. The pedestal stands approx. 36” tall
when the base is buried. There are several different width and
depth options for every situation. No mounting stakes or platforms are required for installation. A pre-wired copper terminal is
provided. Pedestals are constructed of all-dielectric plastic.
Feature options:
•
•
•
•
•
•
•
RLH 4RU Plug-in card housing
Gas Tube protection
Pedestal mounting base
Polymer pad
Heaters and fans with thermostat
Telco Interface units available
Complete Turn-Key Solutions
DURABLE
DURABLE
ALL-DIELECTRIC
ALL-DIELECTRIC
PEDESTALS
PEDESTALS
Type-02,-03,-06 and -07 Pedestals
Type-02
Type-03
Type-02
Type-03
Type-06
Type-07
Type-06
Type-07
Hi-Density Pedestal enclosures offer a convenient solution for a
Fiber Optic Link CO Side location with high circuit count. The HiDensity Pedestals are constructed of 12-14 gauge steel and are
vented.
The pedestals can be ordered with optional mounting base and
pad. The RLH pedestal mounting base provides added stability
and expanded cable storage for the RLH Hi-Density Pedestal.
The base can be installed alone or with a polymer pad that provides a secure mounting foundation for the enclosure.
HI-DENSITY
HI-DENSITY
PEDESTAL
PEDESTAL
Hi-Density Pedestals
Feature options:
•
•
•
•
•
•
RLH 4RU Plug-in card housing
Gas Tube protection
Pedestal mounting base
Polymer pad
Heaters and fans with thermostat
Complete Turn-Key Solutions
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
19
Technical Support
Email:
support@fiberopticlink.com
24/7 technical support:
Toll Free 1-855-RLH-24X7
Toll Free 1-855-754-2497
Contact Information
Corporate Headquarters:
RLH Industries, Inc.
936 N. Main Street
Orange, CA 92867 USA
Phone:
(714) 532-1672
Toll Free 1-800-877-1672
Toll Free 1-866-DO-FIBER
Fax:
(714) 532-1885
Email:
info@fiberopticlink.com
Web site:
www.fiberopticlink.com
RLH Industries, Inc.
936 N. Main Street, Orange, CA 92867 USA
T: (714) 532-1672
F: (714) 532-1885
20
Please contact your RLH sales representative
for pricing and delivery information.
Specifications subject to change without notice.
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com