vSync Remote Client Software Manual

vSync Remote Client Software Manual
User Guide
vSync Remote Client Software Manual
DDNS Support
High Performance Live / Playback
Remote Monitoring
Triplex
Revision A
Remote Playback
Remote PTZ Control
-1-
Remote Control
Built in Web Server
Bi Directional Audio
© vSync Software
vSync Remote Client Software Manual
Table of Contents
Program Installation ...................................................................................................................................... 3
Installation of vSync Software .............................................................................................................. 3
Running the vSync Application............................................................................................................. 3
Overview ....................................................................................................................................................... 4
Quick Setup................................................................................................................................................... 5
Quick Setup – Default DVR Login ........................................................................................................ 5
Quick Setup – Select Camera Assignment .......................................................................................... 5
Quick Setup – Camera Assignment Window Explanation ................................................................... 6
Quick Setup – Camera Assignment Window Example ........................................................................ 6
Quick Setup – Connect to DVR............................................................................................................ 7
Quick Setup – Remote Playback Option .............................................................................................. 7
Quick Setup – Remote Playback for 4300i and 0412i.......................................................................... 8
Quick Setup – Remote Playback for 0912i/0924i and 1612i/1624i...................................................... 9
Quick Setup – E-map Window ........................................................................................................... 10
Main User Interface..................................................................................................................................... 11
Main User Interface – Save / Load Camera Assignment Configuration to File.................................. 12
Main User Interface – Recording Schedule........................................................................................ 13
Main User Interface – Alarm Recording ............................................................................................. 14
Main User Interface – Disk Setting..................................................................................................... 15
Control Panel Buttons – Screen Split View ........................................................................................ 16
Control Panel Buttons – Application Functions .................................................................................. 17
Control Panel Buttons – Play / Record / Stop Video Stream ............................................................. 17
Control Panel Buttons – Sensor Status.............................................................................................. 17
Control Panel Buttons – Relay Control............................................................................................... 18
Control Panel Buttons – E-map.......................................................................................................... 18
Control Panel Buttons – PTZ Control ................................................................................................. 18
Control Panel Buttons – PTZ Directional / Zoom / Focus Control...................................................... 19
Control Panel Buttons – Application Toolbar...................................................................................... 19
Video Display .............................................................................................................................................. 20
Display Window .................................................................................................................................. 20
Channel Status Indicator Area ........................................................................................................... 20
Revision A
-2-
© vSync Software
vSync Remote Client Software Manual
Program Installation
Program Installation
The vSync is a client viewer program that highly supports those network cameras and video servers. It is
recommended to run vSync on Windows 98SE or later versions with Intel Pentium III and minimum
256MB of RAM. However, it is strongly recommended to run vSync on PCs with more powerful
specifications to efficiently handle multiple displays.
Installation of vSync Software
1. Insert the CD provided, into CD-ROM drive of your PC
2. Execute the “vSync_2.12.2.1_setup.exe” application in vSync Client Software Folder in the CDROM
Directory
3. Installation Options, leave everything checked and click Next
4. Installation Folder, leave the destination folder default and click Install
5. Click Close to exit the Installation
Running the vSync Application
1. To execute the vSync application, you will need to go to the
a. Start Menu of your computer and nagivate to the vSync folder in the Programs folder
b. Click on the vSync Folder and click the vSync shortcut
Revision A
-3-
© vSync Software
vSync Remote Client Software Manual
Overview
Overview
vSync is designed to display a maximum of 16 basic screens of fixed size at the same time. It also allows
users to monitor multiple screens of different sizes by combining basic screens as desired.
There are some special features for which time setting is required, such as Scheduling video-recording
and Recorded-Video Playback. Time settings are based on the time on the PC. Therefore, it is required
that the time displayed on your PC be accurate. However, for videos that are transmitted in real-time, the
time displayed at the bottom of the viewer screen is the time of the video server or network camera in
operation.
•
It is recommended not to change network parameters in “Admin page” while vSync and DVR
control is exchanging data with corresponding device.
Revision A
-4-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup
Quick Setup – Default DVR Login
These are the default User ID and Password to connect to the DVR using the remote client and/or the
web based interface.
SSA-4300i
SSA-0412i
SSA-0912i/0924i
SSA-1612i/1624i
4 Channel Light Version
4 Channel Enhanced
9 Channel Enhanced
16 Channel Enhanced
vSync Models
vSync Software
Web Viewer
User ID
admin
Password
admin
Web Based
Administration
User ID
Password
root
1111
User ID
Password
root
dw2001
Quick Setup – Select Camera Assignment
On the bottom of the application you will see the bar below with icons. Click on the Camera Assignment
button as shown below.
Revision A
-5-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup – Camera Assignment Window Explanation
1) Enter IP Address
2) Enter User ID
3) Enter Password
4) Store Password
5) Save Settings
Quick Setup – Camera Assignment Window Example
Option: Description can be inputted to describe the camera location (e.g. Front Lobby, Warehouse).
Once all the information has been entered into the spreadsheet, press the green Checkbox on the bottom
of the window to Save Settings.
Revision A
-6-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup – Connect to DVR
Press PLAY to connect to
DVR
Connection should establish within a few seconds. If it does not work, please check firewall settings,
and port forward the ports that are defined on the network settings of the DVR.
Quick Setup – Remote Playback Option
Press Remote Playback
Remote Playback will establish a link with the DVR,
so you will be able to search data from a previous day.
Revision A
-7-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup – Remote Playback for 4300i and 0412i
SSA-4300i
SSA-0412i
4 Channel Light Version
4 Channel Enhanced
vSync Models
Remote Playback
1) Select Day
2) Check Time
3) Press Play
Revision A
-8-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup – Remote Playback for 0912i/0924i and 1612i/1624i
SSA-0912i/0924i
SSA-1612i/1624i
9 Channel Enhanced
16 Channel Enhanced
vSync Models
Remote Playback
1) Select Day
2) Open Record List Window
6) Press Play
Record List Window
3) Choose Hour (Double Click)
4) Choose Minute (Double Click)
5) Close Record List
Revision A
-9-
© vSync Software
vSync Remote Client Software Manual
Quick Setup
Quick Setup – E-map Window
Load Image
1) Select Map
4) DROP
2) Select Camera
3) DRAG
Revision A
- 10 -
© vSync Software
vSync Remote Client Software Manual
Main User Interface
Main User Interface
Starting the vSync, the main UI consisting of several controls as shown below will be displayed on the
screen. It consists of 2 functional areas: 1) Video Display Window and 2) Control Panel. Video display
area is located at the left of the screen while control panels are located at the right and bottom of the left
side screen.
Video Display Window
Control Panel
Main Application Bar
Revision A
- 11 -
© vSync Software
vSync Remote Client Software Manual
Main User Interface
Main User Interface – Save / Load Camera Assignment Configuration to File
On the bottom of the application you will see the bar below with icons. Click on the corresponding button
as shown below.
SAVE
This will SAVE the camera assignment settings to a local file.
LOAD
This will LOAD the camera assignment settings from a local file.
Revision A
- 12 -
© vSync Software
vSync Remote Client Software Manual
Main User Interface
Main User Interface – Recording Schedule
On the bottom of the application you will see the bar below with icons. Click on the corresponding button
as shown below.
The vSync software allows the user to record a schedule on specified cameras and will save the video
stream to an ICF File and/or AVI File (must be setup in Disk Setting)
Display Schedules
1) Select Page
2) Select Days
3) Select Time
4) Select Cameras
Add to Schedule
Remove Schedule
Revision A
- 13 -
© vSync Software
vSync Remote Client Software Manual
Main User Interface
Main User Interface – Alarm Recording
On the bottom of the application you will see the bar below with icons. Click on the corresponding button
as shown below.
If the sensor is triggered on DVR, you can record the channel for duration, play an alarm sound on the
computer, and choose the channel.
1) Select Duration
2) Select Sound
3) Select Cameras
Revision A
- 14 -
© vSync Software
vSync Remote Client Software Manual
Main User Interface
Main User Interface – Disk Setting
On the bottom of the application you will see the bar below with icons. Click on the corresponding button
as shown below.
You can set the amount of space, folder where the captured recording gets saved to and choose to
overwrite old files once disk space is full or stop recording. vSync software automatically saves the
recording files to ICF file format. You have the option to select AVI, which will automatically convert the
file to AVI file format.
1) Select Disk Space
2) Select Folder
3) Select File Format
Revision A
- 15 -
© vSync Software
vSync Remote Client Software Manual
Control Panel Buttons
Control Panel Buttons – Screen Split View
Auto/Manual Sequence
1 Channel Split View
4 Channel Split View
9 Channel Split View
16 Channel Split View
Auto/Manual Sequence
Sequence the channels with automatically (auto button) or manual mode (arrow buttons).
1 Channel Split View
Set the basic video display screen to 1 x 1 mode to display one video channel out of the video
channels assigned for the screen.
4 Channel Split View
Set the basic video display screen to 2 x 2 mode to display 4 video channels out of the video
channels assigned for the screen.
9 Channel Split View
Set the basic video display screen to 3 x 3 mode to display 9 video channels out of the video
channels assigned for the screen.
16 Channel Split View
Set the basic video display screen to 4 x 4 mode to display 16 video channels out of the video
channels assigned for the screen.
Revision A
- 16 -
© vSync Software
vSync Remote Client Software Manual
Control Panel Buttons
Control Panel Buttons – Application Functions
Administration Menu (Web Based)
Video Rotation
Capture BMP Image to Hard Disk
Enable Bi-Directional Audio
Control Panel Buttons – Play / Record / Stop Video Stream
Connect to DVR Stream
Disconnect DVR Stream
Record DVR Stream
Control Panel Buttons – Sensor Status
This function is enabled only when corresponding device
supports the function. When sensor is in normal state,
corresponding indicator is colored in blue, while in alarm
state, it will be colored as red. Number on the indicator
indicates the number of sensor.
Revision A
- 17 -
© vSync Software
vSync Remote Client Software Manual
Control Panel Buttons
Control Panel Buttons – Relay Control
This function is enabled only when corresponding device supports the function. If corresponding channel
has relay that can be remotely controlled. Press this button to On/Off the relay. Name of the relay is
displayed on the text area at the left of the button.
Control Panel Buttons – E-map
Emap is a graphical representation of a structure or a map. Emap gives the ability to load maps and can
drag and drop the camera onto the map. More information can be found on E-map window.
Control Panel Buttons – PTZ Control
Brightness / Contrast / Volume
PTZ Preset Call Button
PTZ Configuration
PTZ Home
Revision A
- 18 -
© vSync Software
vSync Remote Client Software Manual
Control Panel Buttons
Control Panel Buttons – PTZ Directional / Zoom / Focus Control
Remote Playback Application
PTZ Directional Movement
PTZ Zoom + / Focus + / -
Control Panel Buttons – Application Toolbar
Camera List
Disk Setting
Save Configuration
Alarm Recording
Load Configuration
Playback (Local Recordings)
Schedule Recording
Revision A
- 19 -
© vSync Software
vSync Remote Client Software Manual
Video Display
Video Display
Display Window
Channel Status Indicator Area
Display Window
This is the area showing you the videos that are received from cameras or video severs in multiple
locations. It can have maximum 16 display units (DU) upon your selection of basic layout. By right clicking
inside the display unit, you have access to the per channel alternate menu, which consists of Camera
Assignment, Play, Stop and Recording features.
Channel Status Indicator Area
This area shows the set-up conditions and status of each DU. It consists of status Indicator and some
messages.
Revision A
- 20 -
© vSync Software