Custom Building Products TLSTSQT Installation Guide

Care & Maintenance / TDS-140
TileLab® Heavy­Duty Stripper & Cleaner
1
Product Name
TileLab® Heavy­Duty Stripper & Cleaner
2
Manufacturer
Custom Building Products
13001 Seal Beach Blvd.
Seal Beach, CA 90740-2757
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: 800- 200-7765
Email: contactus@cbpmail.net
custombuildingproducts.com
3
Storage
Product Description
Close container tightly after each use
Concentrated cleaner and stripper for tough cleaning jobs. Cleans
heavy build-up of grease, scuff marks and most major stains. Strips
wax and acrylic floor finishes. Great for renewing old tile installations.
Will also remove light cement grout haze and mortar residue. Will not
harm the surface and emits no strong fumes or odors.
Store in original container only
Store in and use in temperatures between 40°F ­ 90°F (4°C and 32°C)
Store in areas inaccessible to small children
Do not reuse empty container, wrap and discard in trash or recycle
Key Features
Health Precautions
Non-acidic; Strips wax and finishes
CORROSIVE. HARMFUL IF SWALLOWED. CAUSES EYE, SKIN AND
RESPIRATORY IRRITATION. Wear skin and eye protection. Do not
breathe vapor or spray. Contains sodium hydroxide and diethylene
glycol monobutylether. If in eyes, flush with water for at least 15
minutes. If on skin, wash with soap and water. If respiratory tract is
irritated, move to fresh air. If irritation persists, seek medical attention.
If swallowed, DO NOT induce vomiting, seek medical attention. KEEP
OUT OF REACH OF CHILDREN.
Cuts through heavy build-up
Suitable Tile Types
Use on tile, stone, marble, granite, grout, cement, masonry and vinyl
flooring.
Packaging
1 quart (946 mL) bottle
6
4
Technical Properties Chart
Removes most common dirt and grease
Removes most acrylic floor finishes
pH of mixed material 10 12
Complies with all Federal and SCAQMD Standards for VOCs
5
Availability & Cost
Technical Data
7
Application of Product
Read entire label before using. Remove all loose dust and dirt from the
surface. For stripping or removing wax and acrylic floor finishes, light
cement grout haze or mortar residue use full strength.
For normal heavy-duty cleaning: Mix 1 part Heavy-Duty Stripper &
Cleaner with 7 parts water.
Cleaning of equipment
Clean tools and hands with water before material dries.
Published Date: 8/8/2014
Item Code
Size
Package
USA
TLSTSRAQT-3
1 qt (946 ml)
Bottle
Canada
CTLSTSQT-3
1 qt (946 ml)
Bottle
Product Warranty
Custom® Building Products warrants to the original consumer
purchaser that its product shall be free from defects in material and
workmanship under normal and proper usage for a period of one year
following the date of original purchase. Custom's® sole liability under
this warranty shall be limited to the replacement of the product. Some
states, countries or territories do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty will not extend to any
product which has been modified in any way or which has not been
used in accordance with Custom's® printed instructions. Custom®
makes no other warranties either expressed or implied. This warranty
gives you specific legal rights, and you may have other rights that vary
from state to state or from one country/territory to another. This
warranty is not transferrable.
Instructions
For stronger cleaning action: Mix 1 part with 5 parts water. Liberally
apply with sponge or mop and allow to stand for 3-5 minutes, 45
minutes for heavy residue. Do not allow it to dry. Lightly scrub the
surface with a nylon scrub brush or scrub machine. Remove residue
with a mop or wet vacuum. Repeat as necessary. When cleaning or
stripping is completed, rinse thoroughly with water and remove
residue with mop or wet vacuum.
Location
8
Product Maintenance
Properly installed product requires no special maintenance.
Care & Maintenance / TDS-140
TileLab® Heavy­Duty Stripper & Cleaner
9
Technical Services Information
For technical assistance, contact Custom® Building Products.
10 Filing System
Additional product information is available from the manufacturer upon
request.
Related Products
TileLab® SurfaceGard® Sealer
Published Date: 8/8/2014
Care & Maintenance / TDS-140
TileLab® Heavy­Duty Stripper & Cleaner
Coverage
SIZE
Min Coverage
Max Coverage
For Cleaning:
Quart (946 mL) — Diluted 7:1
200 sq. ft. (19 M²) 600 sq. ft. ( 55.7 M²)
For Stripping:
Quart (946 mL)
Published Date: 8/8/2014
25 sq. ft. (2.3 M²)
75 sq. ft. (7 M²)