M32192T2-PTC User`s Manual

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
M32192T2-PTC
Converter Board for In-circuit Connection (for M32192FxxFP)
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET,
CSPLUG/W and LSPACK are trademarks of Tokyo Eletech Corporation.
Notes regarding these materials
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate
Renesas products for their use. Renesas neither makes warranties or representations with respect to the
accuracy or completeness of the information contained in this document nor grants any license to any
intellectual property rights or any other rights of Renesas or any third party with respect to the information in
this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising
out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,
programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military
applications such as the development of weapons of mass destruction or for the purpose of any other military
use. When exporting the products or technology described herein, you should follow the applicable export
control laws and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and
application circuit examples, is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas products listed in this
document, please confirm the latest product information with a Renesas sales office. Also, please pay regular
and careful attention to additional and different information to be disclosed by Renesas such as that disclosed
through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas
assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information
included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in
light of the total system before deciding about the applicability of such information to the intended application.
Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any
particular application and specifically disclaims any liability arising out of the application and use of the
information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas
products are not designed, manufactured or tested for applications or otherwise in systems the failure or
malfunction of which may cause a direct threat to human life or create a risk of human injury or which require
especially high quality and reliability such as safety systems, or equipment or systems for transportation and
traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication
transmission. If you are considering the use of our products for such purposes, please contact a Renesas
sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who
elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas
Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect
to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or
damages arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use
conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and
injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention,
appropriate treatment for aging degradation or any other applicable measures. Among others, since the
evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or
system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas
products are attached or affixed, the risk of accident such as swallowing by infants and small children is very
high. You should implement safety measures so that Renesas products may not be easily detached from your
products. Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written
approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this
document, Renesas semiconductor products, or if you have any other inquiries.
CAUTION
Renesas Tools Homepage
Rev.3.00
Dec. 16, 2008
REJ10J0941-0300
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
http://www.renesas.com/tools
(1/6)
1. Outline
The M32192T2-PTC is a converter board for featuring the debugging function such as real-time tracing when using the SDI emulator,
M32170T-SDI, M32100T-SDI-E, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E with the M32192FxxFP.
Compared with the M32100T3-SDI-E or M32100T5-SDI-E, more loss of trace information occurs when using with the
M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E.
For the M32192T2-PTC, using with the M32100T3-SDI-E or M32100T5-SDI-E is recommended.
2. Package Components
(1) M32192T2-PTC converter board
(2) YQPACK144SD (made by Tokyo Electech Corporation)
(3) NQPACK144SD-ND (made by Tokyo Electech Corporation)
YQPACK144SD
M32192T2-PTC
(4) YQ-GUIDE x 4 (made by Tokyo Electech Corporation)
(5) M32192T2-PTC User’s Manual (This manual)
YQ-GUIDE(x4)
(6) M32192T2-PTC User’s Manual (Japanese)
NQPACK144SD-ND
Figure 2.1 Package components
3. Specifications
Table 3.1 Specifications
Applicable package
Applicable MCU
Supported emulator
Mounted MCU
Clock
MCU power supply
144-pin LQFP (PLQP0144KA-A, previous code 144P6Q-A)
M32192FxxFP
M32170T-SDI, M32100T-SDI-E, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E
With the M32170T-SDI or M32100T-SDI-E, separately available M3T-PTC-CNV is required.
M32192F8VWG
20MHz
Supplied from the user system
4. Usage
The M32192T2-PTC can be used for debugging and on-board evaluation in common by mouting the NQPACK144SD-ND on the
user system.
(1) For debugging
Mount the NQPACK144SD-ND (included with the M32192T2-PTC) on the 144-pin QFP foot pattern of the user system. Then
connect the M32192T2-PTC via the YQPACK144SD. As the M32192F8VWG is mounted on the M32192T2-PTC, all functions
of the emulator such as real-time tracing can be used.
Before using the M32192T2-PTC, be sure to read “8. Precautions” on page 6.
(2) For on-board evaluation
Mount the M32192FxxFP and the HQPACK144SD (separately available) in that order on the NQPACK144SD-ND on the user
system.
(2/6)
5. Connection Procedure
(7) Interface cables
of the pod probe
5.1 For the M32170T-SDI or M32100T-SDI-E
(1) Mount the NQPACK144SD-ND on the user system
(2) Connect the YQPACK144SD on the NQPACK144SD-ND.
M3T-PTC-CNV
(separately available)
(3) Secure the four corners of the YQPACK144SD with the
(6)
YQ-GUIDEs.
● Do NOT use the screws included with the
YQPACK144SD.
● Do NOT use the screwdriver included with the
NQPACK144SD-ND for fixing the YQ-GUIDEs. That
is used only for the HQPACK144SD.
(4) Clock select switch
M32192T2-PTC
(5)
(4) Set the clock select switch.
Use a slotted screwdriver.
Refer to "6. Selecting a Clock" on page 5.
YQ-GUIDE(×4)
(3)
(5) Mount the M32192T2-PTC on the YQPACK144SD.
(6) Mount the M3T-PTC-CNV on the M32192T2-PTC.
YQPACK144SD
(7) Connect the emulation pod probe to the M3T-PTC-CNV
via the SDI MCU control interface cable and the SDI trace
interface cable.
(2)
NQPACK144SD-ND
(1)
144-pin 0.5mm pitch
(144P6Q-A) foot pattern
: No.1 pin
Be sure to match the position of No. 1 pin of
the foot pattern and each part.
Figure 5.1 Connection Procedure (1)
(3/6)
5.2 For the M32100T2-SDI-E, M32100T3-SDI-E or
M32100T5-SDI-E
(1) Mount the NQPACK144SD-ND on the user system
(2) Connect the YQPACK144SD on the NQPACK144SD-ND.
(3) Secure the four corners of the YQPACK144SD with the
YQ-GUIDEs.
Emulator main unit
or Emulator probe
● Do NOT use the screws included with the
YQPACK144SD.
● Do NOT use the screwdriver included with the
NQPACK144SD-ND for fixing the YQ-GUIDEs. That
is used only for the HQPACK144SD.
(6)
(4) Clock select switch
(4) Set the clock select switch.
M32192T2-PTC
Refer to "6. Selecting a Clock" on page 5.
(5)
(5) Mount the M32192T2-PTC on the YQPACK144SD.
(6) Connect the emulator probe to the M32192T2-PTC.
Use a slotted screwdriver.
YQ-GUIDE(×4)
.
(3)
YQPACK144SD
(2)
NQPACK144SD-ND
(1)
144-pin 0.5mm pitch
(144P6Q-A) foot pattern
: No.1 pin
Be sure to match the position of No. 1 pin of
the foot pattern and each part.
Figure 5.2 Connection Procedure (2)
5.3 On-board Evaluation
(1) Mount the NQPACK144SD-ND on the user system
HQPACK144SD
(separately available)
(2) Mount the M32192FxxFP on the NQPACK144SD-ND.
(3) Mount the HQPACK144SD on the NQPACK144SD-ND.
(3)
M32192FxxFP
(2)
NQPACK144SD-ND
(1)
144-pin 0.5mm pitch
(144P6Q-A) foot pattern
: No.1 pin
Be sure to match the position of No. 1 pin of
the foot pattern and each part.
Figure 5.3 Connection Procedure (3)
(4/6)
6. Selecting a Clock
With the M32192T2-PTC, it is possible to select a clock supply
to the MCU by the clock select switch (SW1). Select a clock
supply as shown below.
However, when used with the M32192T2-PTC, the clock
cannot be supplied from the user system.
(1) 20 MHz
Supplies the clock (X1: 20 MHz) on the M32192T2-PTC
board to the MCU.
(2) SOCKET
Supplies the clock to the MCU from the socket (X2) for
Figure 6.1 Connection diagram of X2 socket
mounting an oscillator on the M32192T2-PTC board. By
mounting an oscillator to the X2 socket of the MCU, it is
possible to change the operating frequency.
Figure 6.1 shows the connecting the X2 socket and the
MCU.
7. External Dimensions and a Sample Foot Pattern of the M32192T2-PTC
Figure 7.1 External dimensions and a sample foot pattern of the M32192T2-PTC
(5/6)
8. Precautions
CAUTION
Cautions to Be Taken for Emulator:
z For debugging, use this product in the combination with the SDI emulator, M32170T-SDI, M32100T-SDI-E,
M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E.
z When using with the M32170T-SDI or M32100T-SDI-E, the following restrictions are applied according to the
MCU operating frequency. The M32192T2-PTC is recommended to use with the M32100T3-SDI-E or
M32100T5-SDI-E.
- More than 66 MHz:
Compared with the M32100T2-SDI-E, M32100T3-SDI-E, or M32100T5-SDI-E, more loss of trace information
occurs.
- 66 MHz or less:
Same as the M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E.
z When using with the M32170T-SDI or M32100T-SDI-E, separately available M3T-PTC-CNV is required.
z When connecting to the M32170T-SDI or M32100T-SDI-E, connect the both cables for connecting the emulator,
the SDI MCU control interface cable (10-pin) and the SDI trace interface cable (20-pin).
z For the precautions for the combination of the emulator, refer to the user’s manual of each emulator.
Cautions for Differences between MCUs and This Product:
z For debugging, as the M32192F8VWG (1MB internal Flash ROM) on the M32192T2-PTC is used, be careful about
the difference of the internal ROM size.
z When the clock select switch is set to the “SOCKET” side, the oscillation occurs by itself, be careful about the
difference of the resistance and the capacitor.
z The capacitive load of the all lines of the MCU will increase depending on wirings and connectors. Use the part
whose timing is critical after checking it works properly.
Cautions to Be Taken for This Product:
z When connecting the YQPACK144SD, be sure to use the included YQ-GUIDEs.
z We cannot accept any request for repair.
z For purchasing the NQPACK144SD-ND, YQPACK144SD and HQPACK144SD contact the following:
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_index.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
http://www.renesas.com/tools
(6/6)