Samsung Serenata SGH-F310 User`s guide

Serenata
User’s Guide
About this Guide
2
This Guide has been specially designed to
guide you through the functions and
features of your phone.
Before you start, familarise yourself with
the following instructional icons:
Note!
Indicates that you need to pay
careful attention to the
subsequent information
regarding safety or phone
features. Also indicates usage
tips or additional information.
Indicates that you can get more
information on the referenced
page.
→
Indicates the order of options
or menus you must select to
perform a step.
BOLD
Indicates a key on the phone or
a soft key: for example, press
SEND (represents the SEND
key).
Copyright information
Rights to all technologies and products that
comprise this device are the property of their
respective owners:
- Bluetooth® is a registered trademark of the
Bluetooth SIG, Inc. worldwide.
Bluetooth QD ID: B012785
- JavaTM is a trademark or registered
trademark of Sun Microsystems, Inc.
- Picsel and Picsel ViewerTM are trademarks of
Picsel Technologies, Inc.
- Windows Media Player® is a registered
trademark of Microsoft Corporation.
is a trademark of SRS Labs, Inc.
WOW HD and Hard limiter is incorporated
under license from SRS Labs, Inc.
Serenata - a music mobile phone
The Serenata music mobile phone
combines a portable music system with
the convenience of customised mobile
phone communications.
The music and phone features can be
used both separately and in
combination.
For example, you can write an SMS
while you listen to music at the same
time. Or you can block incoming calls
and messages, if you wish to purely
listen to music for a while.
3
Safety and usage information
4
Comply with the following precautions
to avoid dangerous or illegal situations
and ensure peak performance of your
mobile phone.
Drive safely at all times
Do not use the phone while driving unless
you use a headset. Park your vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off the phone or disable the
wireless functions when in an aircraft
Your phone can cause interference with
aircraft equipment. Follow all airline
regulations and switch off your phone or
switch to a mode that disables the wireless
functions when directed by airline personnel.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be
using equipment that could be sensitive to
external radio frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Be aware of special regulations
Meet any special regulations in force in any
area and always switch off your phone
whenever it is forbidden to use it, or when it
may cause interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Emergency calls
Key in the emergency number for your
present location, then press SEND.
Keep your phone away from small
children
Keep the phone and all its parts, including
accessories, out of the reach of small
children.
Do not use the phone stand when
holding the phone to your ear
If you close the phone stand toward your ear,
the noise it makes can damage your hearing.
Accessories and batteries
Use only Samsung and Bang & Olufsen
approved batteries and accessories, such as
headsets and PC data cables. Use of any
unauthorised accessories could damage you
or your phone and may be dangerous.
- The phone could explode if the battery is
replaced with an incorrect type.
- Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged
listening to a headset can damage
your hearing.
Use of authorised software
Use only Samsung or Bang & Olufsenauthorised software. The use of any
unauthorised software could damage your
phone.
Qualified service
Only qualified service personnel may repair
your phone.
For more detailed safety information, see
"Health and safety information" on page 59.
Key features of your mobile phone
Powerful, compact, stylish, and loaded
with fun . . . your new mobile phone,
Serenata, delivers the music world, the
tools to keep you connected, and the
features to keep you entertained. With a
sleek, efficient design and the quality
workmanship Samsung and Bang &
Olufsen are known for, this is one
accessory that fits all occasions. From
work, to home, to play, you’ve got the
world at your fingertips.
Get the easy touch screen and wheel
You can access a desired function with a touch of your finger on
the touch sensitive screen. You can also spin the wheel to scroll
through menu options.
Experience unique mp3
You can play music on your Serenata music phone. Enjoy acoustic
performance taking the mp3 music experience to another level.
Synchronise your sounds
You can even synchronise your phone with BeoPlayer or Windows
Media Player® for easy handling and sorting of your music files on
a PC.
Switch to Flight mode
You can use your phone’s non-network services in areas where
wireless devices are prohibited, such as aeroplanes and hospitals.
Get hands-free safety and convenience
With built-in Bluetooth wireless technology, your phone allows
you to transfer media files and personal data or listen to music
and communicate via a wireless headset.
Connect and browse
Access the wireless web to get up-to-the-minute information and
a wide variety of media content.
Send messages
You can send and receive a text, multimedia, or email messages.
Safely view common files
Your phone’s file viewer reads documents of various formats and
allows you to view them.
Speak hands-free on the phone
Using the speakerphone feature, you can talk and listen handsfree and share your call with friends or coworkers.
5
6
Contents
Overview of menu functions, 7
Options to use the music phone, 8
Introduce your phone, 9
Unpack, 9
Phone layout, 9
Icons, 10
Lock mode, 10
Call functions, 25
Make a call, 25
Answer a call, 25
Reject a call, 25
View missed calls, 25
Wear and use the earset (EarSet 3), 26
Use the speakerphone feature, 26
Options during a call, 26
Messages, 28
Assemble and prepare your mobile
phone, 11
Browser, 36
Display operation, 12
Organiser, 39
Daily use of your phone, 14
Library, 41
Switch on or off, 14
Make or answer calls, 14
Access menu options, 15
Enter text, 15
Customise your phone, 17
Browse the web, 17
Play video, 18
Use the Phonebook, 18
Send messages, 18
View messages, 19
Access your voicemails, 19
Use Bluetooth, 20
Use the music player, 21
Prepare for music files, 21
Play music, 22
Operate the music player, 22
Relax with PureMusic, 23
Shuffle and play, 23
Stream music on your phone, 23
Create your own playlist, 23
Use music player options, 23
Change music player settings, 23
Synchronise the Phonebook with
Outlook, 24
Synchronise via a PC data cable, 24
Synchronise via Bluetooth, 24
Phonebook, 43
Call log, 46
Applications, 47
Settings, 50
SIM services, 56
Solve problems, 57
Health and safety information, 59
Index, 62
Overview of menu functions
To access Menu mode, press OK in Idle
mode.
The following list shows the menu
structure and indicates the page where
you can find a description of each
feature.
To use the Music player, tap Music.
p. 21
1 Messages
1.1 Create message
1.2 Inbox
1.3 Email inbox
1.4 Drafts
1.5 Outbox
1.6 Sent
1.7 Templates
1.8 Archive messages
1.9 Settings
1.10 Memory status
2 Browser
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Home
Enter URL
Bookmarks
Saved pages
History
Advanced
Connection profiles
Streaming profiles
3 Organiser
3.1
3.2
3.3
3.4
Calendar
Appointments
Anniversaries
Missed alerts
p. 28
p. 28
p. 30
p. 31
p. 31
p. 32
p. 32
p. 32
p. 33
p. 33
p. 35
p. 36
p. 36
p. 36
p. 37
p. 37
p. 37
p. 38
p. 38
p. 38
p. 39
p. 39
p. 40
p. 40
p. 40
4 Library
p. 41
4.1
4.2
4.3
4.4
4.5
p. 41
p. 41
p. 42
p. 42
p. 42
Images
Sounds
Videos
Other files
Memory status
5 Phonebook
5.1 Contacts
5.2 Add new contact
5.3 Groups
5.4 My business card
5.5 Own number
5.6 Copy all to SIM
5.7 Copy all from SIM
5.8 Delete all
5.9 Settings
5.10 Memory status
5.11 Service number*
7
6 Call log
6.1
6.2
6.3
6.4
6.5
6.6
Recent calls
Missed calls
Dialled calls
Received calls
Remove all
Call duration
7 Applications
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
Alarm
World clock
Calculator
Currency converter
Voice memo
Memo
To do
Media player
8 Settings
8.1 Time & date
8.2 Phone settings
8.3 Display settings
8.4 Sound settings
8.5 Network services
8.6 Bluetooth
8.7 Security
8.8 Connection settings
8.9 DRM licences
8.10 Memory settings
8.11 Master reset
9 SIM services*
p. 46
p. 46
p. 46
p. 46
p. 46
p. 46
p. 46
p. 47
p. 47
p. 47
p. 48
p. 48
p. 48
p. 49
p. 49
p. 49
p. 50
p. 50
p. 50
p. 51
p. 51
p. 51
p. 52
p. 54
p. 54
p. 55
p. 55
p. 55
p. 56
p. 43
p. 43
p. 43
p. 44
p. 44
p. 44
p. 44
p. 44
p. 45
p. 45
p. 45
p. 45
* Service number and SIM services are
available only supported by your SIM card.
Options to use the music phone
8
Your phone consists of two equal parts; a
portable micro audio system and a
mobile phone. Whether you use phone
functions or wish to listen to music, you
have several options.
Blue menus represent phone related functions such
as Messages, Browser and Organiser.
Options to use the phone
When you use the phone functions you
may...
- Use the phone by holding it to your ear.
- Use the enclosed earset to talk on the
phone.
- Use the phone’s loudspeaker to talk
hands-free. Simply raise the
loudspeaker and pull out the phone’s
stand, then place it in front of you, for
example, on a table.
Red menus relate to the music functions, for
example, Artists, Albums and Tracks. To operate
the music phone, you must use both the wheel and
the display.
Options to listen to music
When you use the music functions you
may...
- Use the enclosed earset as a headset to
listen to music in your private sphere.
- Raise the built-in loudspeaker, which
allows you to use the phone as a micro
audio system.
To operate the phone, you must use the wheel and
the touch screen. Hold the phone and use your
thumb to turn the wheel and to use the touch
screen.
- Connect playback music from the
phone via the enclosed line output to
your Bang & Olufsen music system
setup.
You may also operate the phone while it stands on
the table. This is relevant if, for example, you talk
while you use the speakerphone.
Introduce your phone
In this section, learn about your mobile
phone’s layout, keys, display, and icons.
9
Unpack
Your package contains the following items:
- Phone
- Battery
- Travel adapter
- User’s Guide
You can obtain various accessories from your local
Samsung and Bang & Olufsen retailers.
Note! The items supplied with your phone and the
accessories available at your Samsung and Bang &
Olufsen retailers may vary, depending on your
country or service provider.
Phone layout
The following illustration shows the main elements
of your phone and their functions.
OK key
- Wake up the phone when it is in Sleep mode.
- In Idle mode, access Menu mode.
- In Menu mode, select a highlighted menu option or
confirm input.
SEND key (green button)
- Make or answer a call.
- In Idle mode, retrieve the numbers of recently dialled,
missed, or received calls.
- Start playback of music. Play or pause the music player.
BACK key ( )
- In Idle mode, press and hold to lock or unlock the keys.
- In Menu mode, back up through menus.
Music
- Press the screen lightly to open the music player.
- Switch between the phone and the music player.
C key
- Delete characters from the display.
- In Idle mode, press and hold to switch Silent mode on or
off.
END key (red button)
- Press and hold to switch the phone on and off.
- End or reject a call.
- End the music player.
- In Menu mode, press to return the phone to Idle mode.
Wheel
- In Idle mode, turn the wheel to search for a
Phonebook entry.
- In Menu mode, scroll through menu options.
- Turn the wheel to increase or lower volume.
- In Sleep mode, wake up the phone with any button on
the wheel.
More
Press the screen lightly to access the More menu.
Shortcut bar
Press the lower part of the screen to access shortcut
menus that you can customise.
Microphone
You can speak into the microphone during a call.
Multi-function jack
for the earset, travel adapter, and PC data cable.
10
>> Introduce your phone
Icons
Lock mode
The following icons may appear on the top line of
the screen to indicate your phone’s status.
Depending on your country or service provider, the
icons shown on the display may vary.
You can lock the exposed keys on the phone and
the touch screen to prevent you from accidentally
pressing them.
Icon
Definition
Signal strength
Call in progress
Outside your service area; you cannot
make or receive calls
Flight mode activated
Roaming network
GPRS (2.5G) network connected
UMTS (3G) network connected
Home zone, if you have subscribed to
this service
Call diverting feature active
Bluetooth activated
Music background in progress
Bluetooth headset or hands-free car kit
connected
New text message (SMS)
New multimedia message (MMS)
New email message
New voicemail message
New configuration message
Lock mode
Alarm activated
Silent mode activated
Battery power level
In Idle mode, press and hold BACK to lock the keys
and touch screen. To unlock them, press and hold
BACK again.
You can also set the phone to switch to Lock mode
automatically when the display turns off. In Idle
mode, press OK and select Settings → Phone
settings → Auto keylock → On.
Assemble and prepare your mobile phone
Get started by assembling and setting up
your mobile phone for its first use.
1
2
3
4
5
6
To insert SIM-card and battery
About the low battery indicator
1 Pull out the stand and slide the backside
upwards to raise the loudspeaker.
When your battery is low, the phone will emit a
warning tone and a low battery message. The
battery icon will also be empty and blinking. If the
battery level becomes too low, the phone will
automatically power off. Recharge your battery to
continue using your phone.
2 Lift the battery cover away.
3 Insert the SIM-card.
Note! Make sure that the gold-coloured
contacts on the card face downwards.
SIM card information
4 Install the battery.
5 Slide the cover back on and press it slightly.
6 Open the cover to the multi-function jack on the
bottom of the phone. Plug the travel adapter
into the phone and a standard AC power outlet.
When the phone is completely charged (the
icon is no longer moving), unplug the charger
from the power outlet and from the phone.
Ready for use
It takes approximately three hours to
charge the phone. When the phone is
charged, unplug the charger, and the
phone is ready for use. To switch on the
phone, press and hold END (red button)
on the wheel.
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your pincode and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
11
Display operation
12
Your phone has a sensitive touch screen.
Instead of using a pointing device such as
stylus pen or pencil, use your finger to
select items directly on the screen. Hold
the phone and try to point accurately to
a small area of the screen to perform the
specific functions you want.
- Tap: Softly press the screen once with
your finger to select an option or a
menu. Tapping works like a mouse on a
PC.
- Tap and hold: Press and hold your
finger to preform an action. Using this
action, you can scan forward or
backward in a file while playing music
or video.
Notes!
- Do not use sharp objects to tap on the
screen.
- Do not cover the touch screen using a
plastic cover or any other covers.
- Keep away the screen from humidity
and water.
Wake up the phone...
Make a call...
When you do not use the phone for a specific time,
the phone’s display turns off and the phone
switches to Sleep mode to conserve battery power.
In Sleep mode, you cannot use the touch screen. To
wake up the phone and be able to operate the
phone, press OK or any button on the wheel.
To dial a number and make a call, just touch the
centre of the screen when the phone is in idle
mode.
The illustration shows the phone in idle
mode - ready to operate.
Useful hint...
To lock or unlock the phone, press and hold BACK.
When the dialling screen appears, use the wheel to
highlight digits and press OK to select. Then press
SEND to make the call.
Useful hint...
When you have dialled a number once, you can
add it to the Phonebook.
13
Use the Music menu...
Use the More menus...
Use the menu shortcuts...
Tap Music (the upper left corner of the screen) to
bring up the Music menu. Use the wheel to scroll
down to highlight, for example, Albums from the
list. Then use the wheel to choose between
available albums, and press OK to select the album
you wish to listen to.
Tap More (the upper right corner of the screen) to
bring up a More menu. More menus are context
specific as they contain additional functions related
to the feature you use.
The display has 3 short-cut buttons which can be
accessed directly via the bar key at the bottom of
the display in idle mode. The short-cuts can be
customised to give quick access to specific
functions that you use frequently.
Useful hint...
While you play back music you can bring up the
More menu to, for example, pause the music or
add the album to favourites.
They can be brought up whether you use a phone
or music function - for example Add to playlist,
when you use the music player.
You can select among 24 different features such as
PureMusic, Alarm and Create message, as shown in
the illustration above.
Daily use of your phone
14
In this section, learn how to perform
basic operations and use the main
features of your mobile phone.
Switch on or off
Make or answer calls
To switch the phone on
To make a call
> Press and hold END.
> In Idle mode, tap the centre of the screen to
open the dialling screen.
> If necessary, enter the pincode and select
.
Note! You can also tap More and select Dial
number to open the dialling screen.
> When you use the phone for the first time or
reset it, select a display language and press OK
to start the Serenata introduction. After that,
customise your phone according to your
preferences.
> Enter an area code and phone number.
> When you have finished the setup, the idle
screen appears - ready to operate.
To answer a call
To switch the phone off
In Idle mode, press and hold END.
> Press SEND.
> To end the call, press END.
> When the phone rings, press SEND.
> To end the call, press END.
To adjust the volume during a call
Move the wheel clockwise or counterclockwise.
15
Enter text
You can enter text in some features, such as
Messages, Phonebook, or Calendar, using ABC
mode, T9 mode, My words mode, Number mode,
and Symbol mode.
Change the text input mode
When you are in a text input field:
- tap &:@ to switch to Symbol mode.
- tap 123 to switch to Number mode.
Access menu options
- tap abc to switch to ABC mode.
> In Idle mode, press OK to access Menu mode.
- tap and hold
and T9 mode.
> Use the wheel to scroll through menus.
> Highlight an option and press OK to confirm a
selection.
> To exit, either:
- Press BACK to move up one level.
- Press END to return to Idle mode.
to switch between ABC mode
ABC mode allows you to enter characters by
selecting the character set labelled with the
character you want. You can activate T9 mode
while in ABC mode.
You can also:
- tap More and select T9 mode to switch
between ABC mode and T9 mode.
- tap More and select Number input to switch to
Number mode.
- tap More and select Symbol input to switch to
Symbol mode.
- tap More and select Text input to switch back
to T9 mode or ABC mode from Symbol mode or
Number mode.
Change a language for text input
Symbol mode allows you to enter special
characters or symbols.
In a text input field, tap More and select Input
language → a language.
Number mode allows you to enter numbers.
16
>> Daily use of your phone
Enter a word in ABC mode
Use My words mode
Edit text
Move to the appropriate character set and press
OK until the character you want appears on the
screen. To insert a space, press SEND and enter
the next word.
My words mode enables you to preset words so
that you can quickly and easily insert them into
your text while creating a message.
If you need to edit text on the text input mode,
tap the centre of the screen. When the character
set field is deactivated, turn the wheel to move the
cursor to the place where you edit. To return to
the text input mode, tap the centre of the screen
again.
To enter the same letter twice or to enter a
different letter on the same character set, wait for
the cursor to move to the right automatically or
turn the wheel clockwise. Then enter the next
letter.
Enter a word in T9 mode
> Select the appropriate character set once for
each letter.
T9 predicts the word that you are typing.
Note! This mode is available only when T9 mode is
activated. This feature may not be available for
some languages.
To add a word to the My words list
> Enter the word that you want to add in T9
mode.
> Tap Match to display alternative words for your
input. When there are no more alternative
words, Add word appears.
> Tap Add word.
> Enter the whole word before editing or deleting
characters.
> Enter a word using ABC mode and tap Done.
> When the word displays correctly, press SEND
to insert a space. Otherwise, tap Match to
display alternative word choices for the
characters that you have entered.
You can also add words to the My words list by
tapping More and selecting Add word while
entering text in T9 mode.
The word is added to the My words list.
To select a word from the My words list
Enter numbers
> In T9 mode, tap More and select My words.
Number mode enables you to enter numbers.
Scroll to the digits you want and press OK to insert
the selected digit in the message.
Enter special characters or symbols
Symbol mode enables you to insert symbols.
Scroll through symbols using the wheel and press
OK to insert the selected symbol in the message.
Additional input functions
- Tap
to change case in ABC mode or T9
mode.
- Select the Insert Space marker (
space.
) to insert a
- Press C to delete characters one by one. Press
and hold C to clear the entire display.
> Select the word you want.
17
Customise your phone
Menu shortcuts
Display language
You can set menu shortcuts to be accessed from
Idle mode.
You can change the language to be used for the
display text.
> In Idle mode, press OK and select Settings →
Phone settings → Language.
> Select a language.
Browse the web
> In Idle mode, tap More and select Shortcuts.
> Select a shortcut item.
> Select a menu to be assigned to the shortcut
item.
Launch the web browser
Ringtone setting for a call ringer
To access a shortcut menu, tap the shortcut bar and
select a menu.
You can change the ringtone for a call ringer.
Phone lock
> In Idle mode, press OK and select Settings →
Sound settings → Ringtone.
You can protect the phone against unauthorised
use with a phone password. The phone will require
the password when switched on.
> Select a ringtone.
To adjust the ringtone volume, tap OK in Idle mode
and select Settings → Sound settings → Ring
volume. Use the wheel to change the volume level
and press OK.
Display item
> In Idle mode, press OK and select Settings →
Security → Change password.
> Enter a new 4- to 8-digit password and select
.
> Select a display item.
Silent mode (Quiet mode)
You can switch the phone to Silent mode to avoid
disturbing other people.
In Idle mode, press and hold C, or tap More and
select Silent mode.
Flight mode
By switching to Offline mode, you can use your
phone’s non-network services in areas where
wireless devices are prohibited, such as aeroplanes
and hospitals.
In Idle mode, tap More and select Flight mode.
> Enter the new password again and select
- Manually enter the web address of the website
you want; In Idle mode, press OK and select
Browser → Enter URL.
- Select a web address from the saved web page
list or history list; In Idle mode, press OK and
select Browser → Saved pages or History.
- To scroll through browser items, use the wheel or
touch screen. To move between links on the
browser, tap the left or right hand side of the
touch screen.
.
- To select a browser item, press OK and select
Select.
> Select Phone lock → Enable.
> Enter the password and select
- Access the homepage of your service provider; In
Idle mode, press OK and select Browser →
Home.
Navigate the web
> Enter the default password, 00000000, and
select
.
You can select your display item for the idle screen.
> In Idle mode, press OK and select Settings →
Display settings → Idle display.
Using a built-in web browser, you can easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
.
- To return to the previous page, press BACK.
- To access browser options, tap More.
- To close the browser, press END.
18
>> Daily use of your phone
Play video
Use the Phonebook
Send messages
Prepare for video files
You can store several phone numbers, email
addresses, and other contact information in the
Phonebook. Using the contact information, you can
call them or send messages anytime.
You can send text, multimedia, and email
messages.
- Download from the web browser.p. 36
- Copy from a PC using the optional Samsung PC
Studio. See Samsung PC Studio user guide.
- Copy from a PC using your phone as a memory
disk.p. 21
- Receive via an active Bluetooth connection.
p. 53
- Synchronise with Windows Media Player on a
PC.p. 21
Play video files
> Slide the backside upwards to raise the
loudspeaker.
> In Idle mode, press OK and select Applications
→ Media player → Videos.
> Select a file to play.
While playing a video, use the wheel to adjust
the volume.
> To stop playback, press BACK.
Send a text message (SMS)
Add a contact
> In Idle mode, press OK and select Messages →
Create message → Text message.
> In Idle mode, tap the centre of the screen to
open the dialling screen.
> Enter the message text.
> Enter a phone number using the wheel.
> Tap More and select Add to new contact → a
number type.
> Specify contact information.
> Tap More and select Save to save the contact.
Find a contact
> In Idle mode, turn the wheel clockwise or
counterclockwise to access the contacts in the
Phonebook.
> Press More and select Send message.
> Select Add from Phonebook, Enter number,
or Add from Group.
> Add a destination number.
> Tap More and select Send to send the message.
Send a multimedia message (MMS)
> In Idle mode, press OK and select Messages →
Create message → Multimedia message.
> Select Subject.
> Select the first character of the name you want
to find.
> Enter the message subject and tap Done, or tap
More and select Done.
> Scroll to the contact and press SEND to dial.
> Select Image or video and add an image or a
video clip.
> If the name has more than one number, scroll to
a number and press SEND.
> Select Sound and add a sound clip.
> Select Message.
> Enter the message text and tap Done, or tap
More and select Done.
> Select the Attach file(s) → an item category →
an item to be added. Repeat this step to attach
more items.
> When you have finished, tap More and select
Send.
> Select Add from Phonebook, Enter number,
Enter email, or Add from Group.
> Add a destination number or email address.
> Tap More and select Send to send the message.
19
Send an email
> In Idle mode, press OK and select Messages →
Create message → Email.
View messages
Access your voicemails
You can receive messages from other people and
save them in your phone.
You can access the voicemail server and listen to
the messages.
View a text message
In Idle mode, tap More and select Voicemail. You
are connected to the voicemail server.
> Select Subject.
> Enter the subject of your email and tap Done, or
tap More and select Done.
When a notification appears:
> Select Message.
> Press OK.
> Enter the email text and tap Done, or tap More
and select Done.
> Select the message from the Inbox.
> Select Attach file(s) → an item category.
From the Inbox:
> Select the items to be attached and press OK.
> In Idle mode, press OK and select Messages →
Inbox.
> Tap More and select Attach marked.
> Select a text message (
> Tap More and select Send.
> Select Add from Phonebook, Enter email, or
Add from Group.
> Add an email address.
> Tap More and select Send to send the email.
).
View a multimedia message
When a notification appears:
> Press OK.
> Press More and select Retrieve.
> Select the message from the Inbox.
From the Inbox:
> In Idle mode, press OK and select Messages →
Inbox.
> Select a multimedia message (
).
View an email
> In Idle mode, press OK and select Messages →
Email inbox.
> Select an account.
> Press OK when Check new email is displayed to
download an email or a header.
> Scroll to an email or a header and press SEND.
> If you selected a header, press More and select
Retrieve.
20
>> Daily use of your phone
Use Bluetooth
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to
other Bluetooth devices and exchange data with
them, talk hands-free, or listen to music via a
Bluetooth wireless headset or other Bluetooth
music devices.
Activate Bluetooth
In Idle mode, tap More and select Bluetooth.
Search for and pair with a Bluetooth
device
> In Idle mode, press OK and select Settings →
Bluetooth → My devices → New search.
> Select a device.
> Enter a Bluetooth pincode or the other device’s
Bluetooth pincode, if it has one, and select
.
When the owner of the other device enters the
same pincode, pairing is complete.
Send data
> Access an application, such as Phonebook,
Library, Organiser, Memo, or To do.
> Scroll to an item.
> Tap More and select a sending option →
Bluetooth.
> For sending a contact, select which data you
want to send.
> Search for and select a device.
> If necessary, enter the Bluetooth pincode and
select
.
Receive data
> In Idle mode, press OK and select Settings →
Bluetooth → My phone’s visibility → On to
allow other devices to find your phone.
> When a device attempts to access your phone,
select Yes to permit the connection.
> If necessary, select Yes to confirm that you are
willing to receive.
Use the music player
Play downloaded mp3 files, audio books,
or podcast files on your music phone. The
music phone offers a unique experience
through its embedded speaker. Slide the
loudspeaker open whenever you use the
music player.
Prepare for music files
The Bang & Olufsen BeoPlayer software
and further guidance are included on the
enclosed CD-rom. BeoPlayer
automatically sorts your music
alphabetically by genre, artist, track title
and album title and allows you to make
your own playlists.
To copy music file using BeoPlayer, first
install the BeoPlayer software on you PC.
For information about installing and
using BeoPlayer, see the enclosed CDrom.
Warning for MAC users! To prevent
damage to your phone during transfer of
music, always select ‘Eject Serenata’ in
the bottom toolbar of your computer,
before you disconnect the phone from
your computer.
To synchronise music files with Windows
Media Player
You have the following ways to copy music files to
your phone:
- Copy from a CD by using BeoPlayer on a PC.
- Synchronise with Windows Media Player on a PC.
Using BeoPlayer
21
- Download from the web browser.p. 36
- Copy from a PC using the optional Samsung PC
Studio. See Samsung PC Studio user guide.
- Copy from a PC using your phone as a memory
disk.
- Receive via an active Bluetooth connection.
p. 53
To copy music files from a CD via
BeoPlayer
Using BeoPlayer, you can copy music files from an
audio CD into the music phone.
> Connect your phone and PC with a PC data
cable. Or place the phone in the desktop holder
and connect the PC data cable to the holder.
> In Idle mode, tap More and select Connect to
PC → MTP.
> Select Sync digital media files to this device
when a pop-up window appears on your PC.
> Click PC CD on the control bar to play a CD in
your CD-rom drive.
> Click again, or move your mouse to the left side
of the screen, to access the PC CD list.
> Click the COPY button located in the lower left
side to gain access the destination views.
> Click the arrow in the top right of the destination
view to select Senenata.
> Click NEW FOLDER.
> Drag and drop the tracks you wish to copy from
the PC CD list into the new folder.
> When copying is finished, properly disconnect
the phone from the PC.
You can copy music files to your phone by
synchonising with Windows Media Player 11 or
later on a PC.
Note! To transfer music covers to the phone, you
must use the MTP transfer mode.
> Connect your phone and PC with a PC data
cable. Or place the phone in the desktop holder
and connect the PC data cable to the holder.
> In Idle mode, tap More and select Connect to
PC → MTP.
> Select Sync digital media files to this device
when a pop-up window appears on your PC.
> Select and drag the music files or playlists you
want to the sync list.
> Click Start Sync.
> When synchronisation is finished, properly
disconnect the phone from the PC.
To connect to a PC and copy music files
from it
Note! MAC users should select Mass storage to
transfer music files to your phone.
> Connect your phone and PC with a PC data
cable.
> In Idle mode, tap More and select Connect to
PC → Mass storage.
> Select Open folder to view files when a popup window appears on your PC. Removable disk
window automatically opens on the PC.
If not, open My computer on your Windows
desktop and double-click the corresponding
removable disk to open the phone’s file folder.
> Copy files from the PC to the phone.
> When copying is finished, properly disconnect
the phone from the PC.
22
>> Use the music player
Tap Music to access your music library list
from any menu screen.
The following music libraries are listed:
Artists displays the list of music files
sorted by artist.
Albums displays the list of music files
sorted by album.
Tracks displays the list of music files
sorted by track.
Covers displays the list of music files
sorted by cover image. Use the wheel to
browse the cover images.
Play music
Operate the music player
Favourites displays the list of your
favourite music files.
Using the music player, you can listen to music and
share your favourite songs with others.
During playback, use the following buttons for
basic operation:
Playlists lists the playlists you created.
> Slide the backside upwards to raise the
loudspeaker before using the music player.
- Press SEND to pause or resume playback.
Podcasts displays the podcasts
downloaded from your PC.
> Tap Music. The music library list appears.
Audiobooks displays the list of audio
books.
> Select a music library → a music file. The music
player opens and plays the file.
Genres displays the list of music files
sorted by genre.
> To stop playback and close the player, press END.
Recently added displays the music files
you have recently saved to the phone.
Notes!
- Once you have started playing music,
you can see Now playing on the top
of the music library list. When the music
player is closed, Start playing will
appear instead.
- When you change a genre of a music
file to Audiobook or Podcast, the
cover image of the album that contains
the music file will not display in Covers.
Useful hint...When you press Music in Idle mode
and wait a few seconds, the music player starts
playing the last played music file.
During playback, tap More to access the following
options:
- Pause or Play: pause or resume playback.
- Music library home: access the music library list.
- Add to favourites: add the file to the
Favourites music library.
- Add to playlist: add the file to one of the
playlists you have created.
- Go to artist: open the album list of the artist
currently playing.
- Bass boost: change the bass boost to increase
the output of low frequencies.
- Play via Bluetooth: connect the phone to the
Bluetooth stereo headset and play the file.
- Delete track: delete the file.
- Repeat: turn the repeat mode on or off.
- Send via: send the file via MMS, email, or
Bluetooth.
- Track details: access the file information.
- Press OK to open the current playlist.
- Use the wheel to adjust the volume.
- Tap the left or right arrow on the screen to move
to the next or previous file. If you cannot see the
arrows, tap the bottom centre of the screen to
bring up the arrows.
To move between the music player and music
library list, tap the centre of the screen.
To connect to a Bluetooth stereo headset, during
playback, tap More and select Play via Bluetooth.
When connected, slide the backside down to close
the loudspeaker.
Useful hint...To toggle between the music player
and the phone during playback, press Music. When
the idle screen appears, press OK and access the
menu you want. You can write messages or access
the Phonebook while listening to music.
23
Relax with PureMusic
Use music player options
Change music player settings
You can listen to PureMusic without disturbance
from incoming calls or messages. During playback,
the phone will receive the calls and messages in the
background without alerting you. When you close
the music player, the phone will show you the
notifications for the received calls and messages.
To search for a music file
From the music library list, select Settings.
You can search for a music file in each music library
by entering a name of artist, album, or track.
- Music menu order: change the library order.
> In Idle mode, tap the shortcut bar in the bottom
of the display.
> Press
to activate PureMusic.
> Press OK.
Shuffle and play
When you start playing music from the music
library list by pressing SEND, the music player
randomly plays tracks within the selected list (Artist,
Albums, or other music libraries). Then when all
tracks have been played, the music player plays the
list again with a different random order.
Stream music on your phone
You can access streaming servers and listen to
music on your phone. First, set up a connection
profile for accessing steaming servers.p. 38
From the music library list, scroll to a library, tap
More, and select the searching option such as
Search artists and Search albums.
To delete a track
You can delete tracks from the phone’s memory.
> From the music library list, select a library → a
music file.
> Tap More and select Delete track.
To change the library order
> From the music library list, select Settings →
Music menu order.
> Scroll to the library you want to move.
> Tap More and select Move.
> Move the highlight bar to the place you want,
and tap More and select Save.
To deactivate a music library
> From the music library list, select Settings →
Music menu order.
> Scroll to the library you want to deactivate.
Create your own playlist
> From the music library list, select a music library
→ a music file.
> Tap More and select Add to playlist.
> Select Add to a new playlist.
> Enter a playlist name, and tap Done.
The playlist is saved in Playlists.
You can download playlists from BeoPlayer or
Windows Media Player. For more information, see
"To copy music files from a CD via BeoPlayer" or
"To synchronise music files with Windows Media
Player."
> Tap More and select Exclude from menu.
> To activate it, select Include in menu.
- Bass boost: activate the bass boost to increase
the output of low audio frequencies. This option
is available only when you raise the loudspeaker
or you connect the phone to the earset to play
music.
- Index line searching: when this feature is
activated, select the initial character of each item
in Artists, Albums, Tracks.
- Default volume: select the default volume to be
used for playing music files.
Synchronise the Phonebook with Outlook
24
You can synchronise the phonebook with
Microsoft Outlook® and transfer
contacts, appointments, tasks, and
memos.
Synchronise via a PC data cable
Synchronise via Bluetooth
> Connect your phone and PC with a PC data
cable.
> Search for and pair your phone with your PC.
p. 53
> In Idle mode, tap More and select Connect to
PC → PC Studio.
> Open the Samsung PC Studio program on you
PC and select Synchronise from the PC Studio
window.
> Press OK.
> Open the Samsung PC Studio program on you
PC and select Synchronise from the PC Studio
window.
> Check the items to be synchronised and click the
Sync button.
> When synchronisation is complete, click Detail
to view the result.
> Check the items to be synchronised and click the
Sync button.
> When synchronisation is complete, click Detail
to view the result.
Call functions
This section describes call-related
functions. You can make calls in several
ways or use in-call options.
Note! During a call, the phone will switch
to Sleep mode. To wake up the phone
and use the keys and touch screen, press
any key.
25
Make a call
Answer a call
To make a call
When you receive an incoming call, the phone
rings.
> In Idle mode, tap the centre of the display to
open the dialling screen.
> Enter the area code, and phone number using
the wheel.
Notes!
- To edit the entered numbers, tap the screen.
When the input field is selected, use the wheel
to move the cursor and press C to clear a digit.
- To enter a pause, tap More and select Pause.
> Press SEND.
Press SEND, or tap More and select Accept to
answer the call.
Note! To mute the phone during an incoming call,
turn the wheel counterclockwise.
Reject a call
Press END, or tap More and select Reject to reject
a call.
> When you want to end the call, press END.
To make an international call
> On the dialling screen, select the plus sign (+).
> Enter the country code, area code, and phone
number, then press SEND.
To redial recent numbers
> In Idle mode, press SEND to display the list of
recent numbers.
> Scroll to the number you want and press SEND.
To make a call from the Phonebook
Once you have stored a number in the Phonebook,
you can dial the number by selecting it from the
Phonebook.p. 43
> In Idle mode, turn the wheel clockwise or
counterclockwise.
> Select the first character of the name you want
to find.
> Scroll to the contact and press SEND to dial.
> If the name has more than one number, scroll to
a number and press SEND.
View missed calls
If you have missed calls, the screen displays how
many calls you have missed.
> Press OK.
> If necessary, scroll through the missed calls.
> Press SEND to dial the number you want.
26
>> Call functions
Wear and use the earset (EarSet 3)
Options during a call
Use the earset for maximum sound quality. You can
make or answer calls without holding the phone to
your ear.
You can access a number of functions during a call.
WARNING! Prolonged use at high volume may
cause hearing damage.
Use the wheel to adjust the volume.
Note! While listening to music, redialling a call may
not be available.
To place a call on hold or retrieve
To use the earset, connect it to the jack on the
bottom of the phone.
- Press and hold the centre of the microphone on
the earset to redial the last call.
- Press the button to answer a call.
- Press the button to end a call.
To adjust the volume during a call
Tap More and select Hold to place a call on hold,
or select Retrieve call to retrieve a call on hold.
Use your phone as a speakerphone to talk and
listen with the phone a short distance away.
When you slide the backside upwards to raise the
loudspeaker during a call, the phone switches to
Speakerphone mode. You can talk without holding
the phone to your ear.
You can answer an incoming call while already on
the phone, if your network supports this function
and you have activated the call waiting feature.
p. 52
> Press SEND to answer the call. The first call is
automatically put on hold.
> Tap More and select Swap calls to switch
between the calls.
> To end the current call, press END.
To make a second call
You can make another call while your first call is on
hold if your network supports this function.
> Tap More and select Hold to put the call on
hold.
> Make the second call in the normal way.
Use the speakerphone feature
To answer a second call
> Tap More and select Swap calls to switch
between the calls.
> To end the current call, press END.
27
To use in-call options
- Phonebook: access the Phonebook list.
During a call, tap More to access the following
options:
- View contact details: access contact
information, if the number is saved in
Phonebook.
- Switch to headset or Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit, or back to the phone.
- Hold/Retrieve call: place the current call on hold
or retrieve the call on hold.
- Mute or Unmute: switch the phone's
microphone off or on. When the microphone is
switched off, the person on the other end of the
line will not be able to hear you.
- Mute key tone or Unmute key tone: switch
the DTMF tones on or off. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys.
Note! To communicate with answering machines or
computerised telephone systems, Unmute key tone
must be selected.
- Send message: send a text message to the
person with whom you are talking.
- Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. This option is
helpful for entering, for example, a password or
an account number for an automated banking
service.
- New call: make a new call.
- Calendar: access the calendar to check your
schedule or enter new appointments.
- Memo: create a memo.
- Swap calls: switch between the two calls if you
have a second call.
- Join calls: set up a multi-party call by adding a
caller on hold to a currently active call. You can
include up to 6 people on a multi-party call.
- Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
- Select one call: select one of multi-party call
participants. You can then use the following
options:
Private call: have a private conversation with the
selected participant. The other participants can
converse with each other. After the private
conversation, select Join calls to return both
private participants to the multi-party call.
End call: disconnect the selected participant.
Messages
28
You can send and receive text messages,
multimedia messages, and emails. You
can also access push messages and
broadcast messages.
To access this menu, press OK in Idle
mode and select Messages.
Note! For sending emails and using other
email services, you must subscribe to an
email service and set up your email
account and profile. See Settings →
Email → Email profiles and Email
accounts.p. 34
Create message
Options while composing a text message
Tap More to access the following options:
Use this menu to create and send text messages,
multimedia messages, or emails.
Text message
This menu allows you to create and send text
messages via Short Message Service (SMS).
To create and send a text message
> Enter your message.
Note! The maximum number of characters
allowed in a text message depends on the
encoding setting. If your message exceeds the
maximum number of characters, the phone will
split the message.
> When you have finished entering, tap Send.
> Add a destination number by selecting one from
the following:
Add from Phonebook: select a phone number
from the Phonebook.
Enter number: enter a phone number.
Add from Group: select a caller group from the
Phonebook.
To add more recipients, select Add recipient
and repeat this step.
> Tap More and select Send to send the message.
- Select: confirm or select the currently highlighted
item.
- Send message: move to the destination input
field.
- Save as draft: save the message in the Drafts
folder.
- Insert item: insert a template, contact’s phone
number, or bookmark item.
- Symbol input or Number input: switch to
Symbol mode or Number mode.
- T9 mode: activate or deactivate T9 mode. If T9
mode is activated, Add word and My words are
available.
- Input language: change the input language.
29
Multimedia message
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
and audio, from phone to phone or from phone to
email.
To create and send a multimedia message
> Select the Subject field.
> Enter the subject of your message and tap
Done, or tap More and select Done.
> Select the Image or video field and add an
image or a video clip.
Notes!
- The maximum size allowed for an MMS
message can differ depending on your service
provider.
- The DRM (Digital Rights Management) system
and the file type determine which files can or
cannot be forwarded.
> Select the Sound field → an item category and
add a sound clip.
Options while composing a multimedia
message
Tap More to access the following options;
Depending on the selected field, some options vary.
- Add subject or Add message: add the message
subject or text.
- Add image or video or Add sound: add a
media file stored in the phone’s memory.
- Attach: attach a business card or calender data
as a data format attachment, or a file stored in
the Other files folder.
> Select the Attach file(s) → an item category →
an item to be added. Repeat this step to attach
more items.
> When you have finished, tap More and select
Send.
> Add a destination number or email address by
selecting one from the following:
Add from Phonebook: select a phone number
or email address from the Phonebook.
Enter number: enter a phone number.
> Select the Subject field.
> Enter the subject of your email and tap Done, or
tap More and select Done.
> Select the Message field.
- Preview: view the message as it will be shown
on the recipient’s phone.
> Select the Attach file(s) → an item category.
- Save as draft: save the message in the Drafts
folder.
> Select the items to be attached and press OK. A
check mark appears.
- Edit subject or Edit message: edit the subject or
text.
- Clear subject or Clear message: delete the
subject or text.
- Change image, Change video, or Change
sound: replace an added item.
- Clear image, Clear video, or Clear sound:
remove an added item.
- Add page: add message pages. Move to each
page by tapping the left or right arrow on the
screen.
Note! The DRM (Digital Rights Management)
system and the file type determine which files
can or cannot be forwarded.
> Tap More and select Attach marked.
> When you have finished, tap More and select
Send.
> Add email addresses by selecting from the
following:
Add from Phonebook: select an email address
from the Phonebook.
Enter email: enter an email address.
- Delete page: delete a page.
Add from Group: select a caller group from the
Phonebook.
- Page duration: change the duration of page
display.
To add more recipients, select Add recipient
and repeat this step.
- Go to next page or Go to previous page:
move to the next or previous page.
- View file: view attached files.
Add from Group: select a caller group from the
Phonebook.
- Change attachment: replace an attached item.
> Tap More and select Send to send the message.
To create and send an email
> Enter the email text and tap Done, or tap More
and select Done.
Enter email: enter an email address.
To add more recipients, select Add recipient
and repeat this step.
You can send emails that include text, images, and
audio. To use this feature, you need to subscribe to
an email service and set up your email account and
profile.p. 34
- Send: move to the destination input field.
> Select the Message field.
> Enter the message text and tap Done, or tap
More and select Done.
Email
- Remove attachment: remove an attached item.
- Remove all attachments: remove all attached
items.
> Tap More and select Send to send the email.
30
>> Messages
Options while composing an email
Inbox
Tap More to access the following options:
- Add subject or Add message: add the email
subject or text.
- Edit subject or Edit message: edit the email
subject or text.
Use this menu to access all messages you have
received, except for emails.
The following icons may appear on the message list
to show the message type:
Text message (SMS)
- Attach file(s): attach the following items;
Images, Sounds, or Videos: add images,
sounds, or videos.
Multimedia message (MMS) or Delivery
report for your sent messages
Business cards: add business cards as a data
format attachment.
MMS notification
( : Being retrieved,
: Failed to be retrieved)
Appointment, Anniversary, Memo, or To do:
add calendar data as a data format attachment.
Push messages from web servers
Other files: add files stored in the Other files
folder.
Configuration messages, containing
network parameters from your service
provider
- View: open the selected attachment.
Broadcast messages from your service
provider
- Send: move to the destination input field.
- Change attachment: change the selected
attachment.
- Remove attachment: delete the selected
attachment.
- Remove all attachments: delete all attachments
from the message.
- Save to draft: save the message in the Drafts
folder.
Notes!
- The DRM (Digital Rights Management) system
limits the forwarding of some messages
containing web content. They are indicated by
.
- A ! icon next to a message means that a message
is of high priority. A grey-coloured message icon
is of low priority.
To view a message
From the Inbox screen, scroll to the message you
want and press OK.
To use message options
While viewing a message, tap More to access the
following options:
Text messages
- Reply: send a reply to the sender.
- Forward: forward the message to other people.
- Extract details: extract URLs, email addresses, or
phone numbers from the message.
- Delete: delete the message.
- Add to new contact: save the sender’s number
in the Phonebook.
- Add to existing contact: save the sender’s
number to an existing Phonebook entry.
- Save to Archive: save the message to the
Archive messages folder.
Multimedia messages
- Retrieve: (for MMS notification) retrieve the
message from the server.
- Reply: send a reply to the sender.
- Forward: forward the message to other people.
- Delete: delete the message.
- Extract details: extract URLs, email addresses, or
phone numbers from the message.
- Extract media: save media content from the
message in your phone’s memory.
- Add to new contact: save the sender’s number
in the Phonebook.
- Add to existing contact: save the sender’s
number to an existing Phonebook entry.
31
Email inbox
Drafts
Use this menu to access emails that you have
received.
Use this menu to access messages that you have
saved to send at a later time.
Push messages
To view an email
Select a message to open it. The message opens in
Edit mode.
- Go to URL: connect to the URL specified in the
message.
> Select an email account.
Configuration messages
- Install: apply the configuration specified in the
message to your phone.
- Delete: delete the message.
- Delete: delete the message.
> Press OK when Check new email displays, or
tap More and select Check new email.
- Extract details: extract URLs, email addresses, or
phone numbers from the message.
The phone checks for new emails and
downloads received emails.
Broadcast messages
The following icons may appear on the list to
show the email status:
- Save: save the message to the phone’s memory.
- Extract details: extract URLs, email addresses, or
phone numbers from the message.
- Delete: delete the message.
Delivery report
- Call sender: dial the sender.
- Delete: delete the report.
- Add to new contact: save the sender’s number
in the Phonebook.
- Add to existing contact: save the sender’s
number to an existing Phonebook entry.
Retrieved from the server
Being retrieved
Failed to be retrieved
Note! A ! icon next to a message means that a
message is of high priority. A grey-coloured
message icon is of low priority.
> Scroll to an email or header and press SEND.
> If the email has more than one page, turn the
wheel to scroll through pages one by one.
> Select an attached file to view or play it.
To use email options
While viewing the email or header, tap More to
access the following options:
- Retrieve: (for headers) retrieve the body of the
email from the email server.
- Reply: send a reply message.
- Forward: forward the email to other people.
- Add to new contact: save the sender’s number
in the Phonebook.
- Add to existing contact: save the sender’s
number to an existing Phonebook entry.
- Delete: delete the selected email.
- Extract details: extract URLs, email addresses, or
phone numbers from the email.
- Extract files: save media content from the email
in your phone’s memory.
- Details: access the email properties.
From the message list, tap More to access the
following options:
- Edit: edit and send the message.
- Send: send the message.
- Delete: delete the selected message.
- Delete all: delete all messages.
- Save to Archive: save the message to the
Archive messages folder.
- Details: access the email properties.
32
>> Messages
Outbox
Sent
Templates
Use this menu to access messages that the phone is
attempting to send or has failed to send.
Use this menu to access messages that you have
sent successfully.
Use this menu to make and use templates of
frequently used messages or passages.
Select a message to open it.
Select a message to open it.
To create a template
While viewing a message, tap More to access the
following options:
While viewing a message, tap More to access the
following options:
> Select Create.
- Play: play the message.
- Forward: forward the message to other people.
- Send again: resend the message.
- Delete: delete the message.
To use template options
- Edit: edit and send the message.
- Save to Archive: save the message to the
Archive messages folder.
From the template list, tap More to access the
following options:
- Delete: delete the message.
- Save to Archive: save the message to the
Archive messages folder.
> Enter a message and tap Save.
- Edit: edit the selected template.
- Send message: send a new text message using
the template.
- Create new: create a new template.
- Delete: delete the selected template.
- Delete all: delete all templates.
33
Archive messages
Settings
This message folder stores text messages when you
do not want them to be deleted from the phone.
You can copy messages to this folder by using the
Save to Archive option from the other message
folders.
Use this menu to select various options for using
the messaging services.
Multimedia message
You can change default MMS settings.
- Sending options: set up the following options
for sending multimedia messages:
Text message
Priority: set the priority level of your messages.
You can change default SMS settings.
Validity period: set the length of time your
messages are stored in the MMS server.
- Settings x (where x is the setting group number):
set the properties of each profile. Tap More and
select Edit to access the following options:
Delivery time: set a time delay before messages
are sent.
Center address: store or change the number of
your SMS server.
Expiration: set the length of time your messages
are stored in the SMS server.
Default type: set the default message type. The
network can convert messages into the selected
format.
Name: enter a profile name.
- Sending options: set the following options for
sending text messages:
Reply path: allow the recipient to reply to you
through your message server.
Delivery report: set the network to inform you
when your message has been delivered.
Network selection: select either CS only (GSM)
or PS preferred (GPRS), depending on your
network.
Keep a copy: leave copies of your messages in
the Sent folder after sending.
Character support: select a character encoding
type. When you select Automatic, the phone
switches the encoding type from GSM-alphabet
to Unicode if you enter a Unicode character.
Using Unicode encoding will reduce the
maximum number of characters in a message to
about half. If this menu is not shown, your phone
provides automatic character encoding by
default.
Hide address: set your address to be hidden
from the recipient’s phone.
Delivery report: set the network to inform you
when your message has been delivered.
Read report: determine whether or not your
phone sends a read-reply request.
Keep a copy: leave copies of your messages in
the Sent folder after sending.
- Receiving options: set up the following options
for receiving a multimedia message:
Home network: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming network: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Reception within your home network or abroad
has the following options:
- Manual: the phone displays notifications. Use
the Retrieve option to manually retrieve new
messages.
- Restricted: (Roaming network only) the phone
receives notifications first from the server.
When you attempt to retrieve new messages,
the phone informs you of additional charges.
- Autodownload: the phone automatically
retrieves messages from the server.
Delivery report: set the network to inform the
sender when a new message has been delivered.
Read report: determine whether or not your
phone sends a read-reply.
Anonymous reject: reject messages from
unknown senders.
34
>> Messages
- MMS profiles: select a connection profile to be
used for MMS.
Note! You can edit a profile using the Connection
settings menu.p. 54
- Message class: set up the options for creating
MMS messages:
Message class: select the type of message
content you will add or the message size.
- Text Only: you can add only text of up to 30
KB.
- Image basic: you can add any type of item,
except for video, of up to 30 KB.
- Image rich: you can add any type of item,
except for video, of up to 100 KB.
- Video basic: you can add any type of item of
up to 100 KB.
- Video rich: you can add any type of items of
up to 300 KB.
Creation mode: select an MMS creation mode.
- Free: you can create a message with any type
of content and of any size.
- Restricted: you can create a message with the
specified type of content and the size specified
by default.
- Warning: you can create a message with any
type of content and of any size, but the phone
will inform you when the content and size
exceed the maximum.
Email
You can configure default email settings.
Note! You cannot change email profile settings while an
email is being sent or retrieved.
- Sending options: set up the following options
for sending emails:
From: set the sender name.
Sending account: select the default email
account.
Priority: select the priority level of emails.
Keep a copy: send copies of your emails to your
email account.
- Email accounts: select an account to be used or
set up an email account. Tap More and select
Edit to access the following properties for each
account:
Account name: enter a name for the currently
selected account.
SMTP server: enter the IP address or host name
of the outgoing email server.
SMTP port: enter the SMTP port number.
Use SSL: activate the use of the SSL (Secured
Sockets Layer) protocol for the outgoing email
server.
Send confirmation: set the network to inform
you when your emails are delivered.
Retrieve server type: select the protocol for the
incoming email server. The remaining options
depend on the protocol type setting.
Read reply: send a read-reply request along with
your emails.
Retrieve server: enter the IP address or host
name of the POP3 or IMAP4 server.
Add my namecard: allow your contact
information to be attached to emails. You must
create a business card.p. 44
Retrieve port: enter the POP3 or IMAP4 port
number.
Add my signature: attach your name, phone
number, or a memo to your email.
Add signature: enter the name, phone number,
or a memo in your signature.
- Receiving options: set up the following options
for receiving an email:
Retrieving option: set whether the phone
downloads the entire email or only the headers.
Reject if over: determine the maximum size for
incoming emails.
Check interval: determine how often the phone
checks the server for incoming emails. If this
option is set to Do not use, you can use the
Check new email option to check your email
manually.
Read reply: determine whether or not your
phone sends a read-reply. When this option is set
to On, the phone prompts you to send a readreply to the sender.
Block address: specify email addresses to be
rejected, and activate or deactivate mail blocking.
Block subject: specify subjects to be rejected,
and activate or deactivate mail blocking.
- Email profiles: select a connection profile to be
used for email services.
Note! You can edit a profile using the Connection
settings menu.p. 54
Use SSL: activate the use of the SSL (Secured
Sockets Layer) protocol for the incoming email
server.
Retrieving option: (IMAP4 protocol only) set
whether the phone retrieves messages with
attachments or not.
Retrieve count: (IMAP4 protocol only) set the
number of email headers the phone retrieves
from the server at any one time.
Keep a copy: leave copies of emails on the email
server after retrieving.
My address: set your email address.
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4 password.
POP3/IMAP4 before SMTP: connect to the
POP3 or IMAP4 server for authentication before
connecting to the SMTP server to send emails.
Use SMTP authentication: enable SMTP
authentication, which requires the user to log in
before sending emails.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
35
Push message
You can change the settings for receiving push
messages from the wireless web server.
- Receive: set how your phone receives push
messages.
- Service center: enter the address of the server
from which you want to receive push messages,
when the Receive option is set to Optional.
Broadcast
You can change the settings for receiving broadcast
messages.
- Receive: select the reception of broadcast
messages.
- Channel list: indicate the channels from which
you wish to receive broadcast messages. Please
contact your service provider for further details.
- Language: select the preferred languages in
which broadcast messages display.
Memory status
Use this menu to view the maximum memory and
available memory for each message type.
Browser
36
The WAP (Wireless Application Protocol)
browser on your phone allows you to
access the wireless web. Using the web
browser, you can access and download
up-to-date information and a wide
variety of media content.
Home
Enter URL
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider.
Use this menu to manually enter the URL address of
a website and access the website.
To access this menu, press OK in Idle
mode and select Browser.
To navigate the web
Note! For accessing and using the WAP
browser, you must set up a connection
profile on your phone. Set up and select a
connection profile on the Connection
profiles and Streaming profiles
menus.p. 38
- To scroll though browser items, use the wheel or
touch screen. To move between hyperlinks, use
the touch screen.
- To select a browser item, press OK.
- To return to the previous page, press BACK.
- To close the browser, press END.
To use browser options
From any web page, tap More to access the
following options:
- Open: access the linked web page.
- Forward: move forward one page (if available in
browser history).
- Back: move backward one page (if available in
browser history).
- Reload: reload the current page with updated
information.
- Page size: change the browser display font.
- Home: return to the homepage.
- Add to bookmarks: add a new bookmark for
the current web page.
- View bookmarks: display the bookmark list.
- Enter URL: enter a URL address manually.
- Send URL via text message: Send the URL
address of the current web page via SMS.
- Save: save a selected image or the current web
page.
- Saved pages: access the list of pages you have
saved while online.
- History: access the list of pages you have
accessed recently.
- Advanced: clear the cache or delete cookies, or
change the browser display settings.
- Details: access details for the current web page.
To access the website you want, enter a URL
address and tap Go.
37
Bookmarks
Saved pages
History
Use this menu to save URL addresses in order to
access websites quickly.
Use this menu to access the list of pages you have
saved while online.
Use this menu to access the list of pages you have
accessed recently.
To add a bookmark
Select a page name from the list to view the
corresponding web page offline.
Select a page from the list to access the
corresponding web page.
> Select Title.
From the saved page list, tap More to access the
following options:
From the history list, tap More to access the
following options:
> Enter a name for the bookmark and tap Done.
- View: access the selected web page.
- Open: access the selected web page.
> Select URL.
- Rename: change the name for the selected web
page.
- Delete: delete the selected web page.
> Tap More and select Create.
> Enter a URL address and tap Done.
> Tap More and select Save.
To access a bookmarked page
Select a bookmark item. Your phone will be
connected to the network and move to the
bookmarked web page.
To use bookmark options
After saving an item, tap More to access the
following options:
- Open: access the bookmarked web page.
- Edit bookmark: edit the URL address and name
of the bookmark.
- Create: add a new bookmark.
- Send URL via text message: send the selected
bookmarked URL via SMS.
- Delete: delete the selected bookmark.
- Delete all: delete all bookmarks.
- Details: access details for the selected
bookmark.
- Delete: delete the selected web page.
- Delete all: delete all web pages.
- Delete all: delete all web pages.
38
>> Browser
Advanced
Connection profiles
Streaming profiles
Use this menu to clear the cache or delete cookies,
or change the browser display settings.
Use this menu to select a connection profile for
accessing the wireless web.
Use this menu to select a connection profile to be
used for accessing a streaming server.
- Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
Note! You can create or edit a profile using the
Connection settings menu.p. 54
This menu may not be available depending on your
service provider.
- Delete cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
- Cookie options: set whether or not cookies are
stored. If you select Prompt, the phone will ask
you to save the cookies of the current page.
- Preferences: change the browser display and
sound settings.
- About browser: access copyright information
about the browser.
Note! You can create or edit a profile using the
Connection settings menu.p. 54
Organiser
Use the Organiser feature to schedule
recurring meetings and events, and
manage your personal calendar.
To access this menu, press OK in Idle
mode and select Organiser.
Calendar
39
To add an anniversary
> Scroll to a date on the calendar and tap More.
Use this menu to keep track of your schedule.
To select a day on the calendar
> Select Create → Anniversary.
> Enter information or change the settings:
When you select Calendar, the calendar is
displayed with today’s date highlighted.
- Occasion: enter information about the
anniversary.
- Turn the wheel clockwise or counterclockwise to
move by day.
- Date: enter the date.
- Tap the left or right arrow at the bottom of the
screen to move by month.
To add an appointment
> Scroll to a date on the calendar and tap More.
> Select Create → Appointment.
> Enter information or change the settings:
- Alarm: select how long before the anniversary
the alarm is to alert you. If you do not want an
alarm for the anniversary, select Off.
- Alarm time: If the Alarm option is selected,
enter the time for the alarm to sound.
- Repeat every year: set the phone to remind
you of the anniversary every year.
> Tap More and select Save to save the
anniversary.
- Subject: enter the subject of the appointment.
- Details: enter information about the
appointment.
- Location: enter information about the location
of the appointment.
- Start date and Start time: enter the starting
date and time.
- End date and End time: enter the ending
date and time.
- Alarm: select how long before the
appointment the alarm is to alert you. If you do
not want an alarm for the appointment, select
Off.
- Repeat: set the appointment to recur. If you
do not want the appointment to recur, select
Off.
- Expiry: change the expiry setting.
> Tap More and select Save to save the
appointment.
To view an item
> Select a date on the calendar to display the items
for the day.
> Select an item to view its details.
While viewing an item, tap More to access the
following options:
- Appointments or Anniversaries: display all
appointment items or anniversary items stored on
the calendar.
- Edit: edit the item.
- Send via: send the item via MMS, email, or
Bluetooth.
- Delete: delete an item.
40
>> Organiser
To use calendar options
On the calendar, tap More to access the following
options:
- View: access the selected date.
Appointments
Missed alerts
This menu displays appointment items you have
created on the calendar.
When you are unable to acknowledge an alarm for
a scheduled item, the phone stores a missed event
alarm until you confirm it.
- Create: add a new item.
- Week view: switch to the week view screen.
Anniversaries
- Day view: switch to the day view screen.
- Go to date: go to the specific date you entered.
- Delete: delete all items stored on the selected
date.
- Delete month: delete all items stored on the
selected month.
- Delete range: delete items for a specific period.
- Memory status: check memory information for
the calendar.
To view items in a different mode
By default, the calendar appears in Month view.
You can change the calendar display to Day view or
Week view. Tap More and select Week view or
Day view.
Day view
You can view items scheduled for the selected date.
Select an item to view its details.
Week view
You can view items scheduled for the selected
week. The blue cells on the timetable indicate items
scheduled for the week. Select the date that
contains the item you want.
Use this menu to view anniversary items you have
created on the calendar.
Library
Library stores your images, videos,
sounds, and document files. You can
open the files on the phone and delete
them from the phone’s memory.
To access this menu, press OK in Idle
mode and select Library.
41
Images
Sounds
This menu stores images you have downloaded
from the web or a PC, received in messages, or
received via Bluetooth.
This menu stores voice memos you have recorded
and sound clips you have downloaded from the
web or a PC, received in messages, or received via
Bluetooth.
To view an image
Note! You can set whether or not to
prevent the Library folders from being
accessed from other Bluetooth devices.
On the Library screen, scroll to a folder.
Tap More and select Hide from
Bluetooth. To share the folder with
other Bluetooth devices, tap More and
select Visible to Bluetooth.
> Select an image folder.
> Select the image you want.
> Turn the wheel clockwise or counterclockwise to
view other images.
To play a sound
> Select a sound folder.
> Select the sound you want. The file plays.
If you are playing a voice memo you have
recorded, see Voice memo.p. 48
To view a slide show
To use sound options
You can view your photos as a slide show, a
sequential presentation of each photo in the
current folder.
From the sound list, tap More to access the
following options:
> Select an image folder.
- Play: play the selected file.
> Tap More and select Slide show. The slide show
begins.
- Send via: send the file via MMS, email, or
Bluetooth.
> Press BACK to stop the slide show.
- Delete: delete the file.
To use image options
From the thumbnail image list, tap More to access
the following options:
- View: open the selected image.
- Send via: send the file via MMS, email, or
Bluetooth.
- Set as caller ID: set the image as a caller ID
image for a Phonebook entry.
- Delete: delete the file.
- Delete all: delete all files.
- Move: move the file to another image folder.
- Rename: change the file name.
- Slide show: view all images in the current folder
as a slide show.
- Protect file or Unprotect file: lock the file to
prevent it from being deleted, removed, and
renamed, or unlock the file.
- Details: view the file properties.
- Delete all: delete all files.
- Move: move the file to another sound folder.
- Rename: change the file name.
- Protect file or Unprotect file: lock the file to
prevent it from being deleted, removed, and
renamed, or unlock the file.
- Details: view the file properties.
42
>> Library
Videos
Other files
Memory status
This menu stores video files you have downloaded
from the web or a PC, received in messages, or
received via Bluetooth.
Use this menu to access any other files than image,
video, music, and sound files. Your phone provides
you with Picsel File Viewer to allow you to view
various document files. Available file formats are
doc, xls, ppt, pdf, and txt.
You can check the total amount of memory for
media items and the amount of memory currently
in use.
To play a video file
> Slide the backside upwards to raise the
loudspeaker.
To view a document
During playback:
Select a file. Picsel File Viewer runs and opens the
document. Use the wheel to scroll through the
pages in a file.
- Press OK to pause or resume playback.
Notes!
- Tap and hold the left arrow to scan backward in a
file.
- Depending on the file size or memory capacity of
Picsel File Viewer, some files may not open
properly.
> Select the video file you want.
- Tap and hold the right arrow to scan forward in a
file.
- Use the wheel to adjust the volume.
- Press BACK to stop playback.
To use video options
From the video file list, tap More to access the
following options:
- If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly.
While viewing a file, tap More to access the
following view options:
- Zoom: switch to Zoom mode. Move the wheel to
zoom in or out. Press OK to return to the normal
view mode.
- Play: play the file.
- Fit to: fit the document to the page size, screen
width, or screen height.
- Send via: send the file via MMS, email, or
Bluetooth.
- Go to: move to another page of the document.
- Delete: delete the file.
- Rotate: rotate the document.
- Delete all: delete all files.
To use document options
- Rename: change the file name.
From the document list, tap More to access the
following options:
- Protect file or Unprotect file: lock the file to
prevent it from being deleted and renamed, or
unlock the file.
- Details: view the file properties.
- View: open the file.
- Send via: send the file via MMS, email, or
Bluetooth.
- Delete: delete the file.
- Delete all: delete all files.
- Rename: change the file name.
- Protect file or Unprotect file: lock the file to
prevent it from being deleted and renamed, or
unlock the file.
- Details: view the file properties.
Phonebook
43
You can store phone numbers in your
phone’s memory and on the SIM card.
The SIM card and phone’s memory are
physically separated, but they are used as
a single entity called Phonebook.
Contacts
Add new contact
Use this menu to search for contact information in
the Phonebook.
Use this menu to add new contacts to the
Phonebook.
To access this menu, press OK in Idle
mode and select Phonebook.
To find a contact
> Change the settings or enter information about
the contact:
> Use the wheel to scroll to the first character of
the contact name you want to find and press
OK.
> Scroll to the contact.
- Name: assign a name.
- Mobile: enter a mobile phone number.
- Home: enter a home number.
- Office: enter a work phone number.
> To view contact information, tap More and
select View.
To dial a number, press SEND or OK. If the
contact has more than one phone number, scroll
to a number and press SEND or OK.
To copy a contact to SIM
> On the contact list, scroll to the contact you
want.
- Email: assign an email address.
- Images: assign an image as a caller ID image
to alert you to a call from the person.
- Group: assign the contact to a caller group.
- Date of birth: enter the person’s birthday.
- Address: assign a postal address.
- Note: add a note about the contact.
> Tap More and select Save to save the contact.
> Tap More and select View.
> Scroll to the number to be copied.
> Tap More and select Copy to SIM.
To use Phonebook options
While viewing contact information, tap More to
access the following options:
Note! Depending on the number type you select,
available options may vary.
- Edit: edit contact information.
- Call: dial the selected number.
- Send message via: send an SMS, MMS, or email
message to the selected number.
- Delete: delete the selected contact from the
Phonebook.
- Send business card via: send the contact as a
data format attachment via MMS, email, or
Bluetooth.
- Copy to SIM: copy the contact from the phone’s
memory to the SIM card.
44
>> Phonebook
Groups
My business card
Own number
Use this menu to organise your contacts in caller
groups.
Use this menu to create your business card and
send it to other people.
To create a new caller group
To save your business card
Use this menu to store your phone numbers or to
assign a name to each number. Changes made here
do not affect the actual subscriber numbers on your
SIM card.
> Select Create.
> Enter your contact information.
> Enter a name for the group and tap Done.
> Tap More and select Save.
To add members to a caller group
To use business card options
> Select a group.
After saving your business card, tap More to access
the following options:
> Select Add member.
> Select the contact you want to add to the group.
To use caller group options
From the group list, tap More to access the
following options:
- View members: display the members of the
selected group.
- Add member: add members to the selected
group.
- Rename: change the name of the group.
- Delete: delete the selected group. Group
members, however, will not be deleted from the
Phonebook.
- Delete all: delete all groups.
- Create: add a new group.
- Send business card via: send the business card
as a data format attachment via MMS, email, or
Bluetooth.
- Send this number via: send the selected
number via SMS, MMS, or email.
- Edit: edit the business card.
Copy all to SIM
Use this menu to copy all of the contacts in the
phone’s memory to the SIM card.
When you set the Default contacts view option to
Both, the contacts will be displayed twice in your
Phonebook list. If necessary, you can delete the
contacts in your phone’s memory to avoid any
confusion.
Copy all from SIM
- Remove business card: delete the business card.
Use this menu to copy all of the contacts on the
SIM card to the phone’s memory.
45
Delete all
Service number
Use this menu to delete all of the contacts in your
phone’s memory, on the SIM card, or both
depending on the Default contacts view setting.
Use this menu to view the SDN (Service Dialling
Number) list assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your
SIM card supports SDN.
Note! You need to enter the password. The
password is preset to 00000000. To change the
password, use the Change password menu.
Settings
Use this menu to change the default settings for
the Phonebook.
- Searching mode: change the sort order of the
contact list.
- Default contacts view: set where the
Phonebook retrieves its entries from. You can
also set the default memory location for storing
contacts.
Memory status
Use this menu to display the number of contacts
you have stored in the Phonebook.
Select the service you want and press SEND.
Call log
46
Use this menu to view the calls you have
dialled, received, or missed, and the
length of the calls.
To access this menu, press OK in Idle
mode and select Call log.
Recent calls
Missed calls
This menu displays the most recent calls dialled,
received, or missed.
This menu displays the most recent calls you have
received but not answered.
To access a call log
> Use the wheel to scroll through the call log list.
Dialled calls
> Select a call log to view the details of a call.
> To dial a number, press SEND.
This menu displays the most recent calls you have
dialled.
To use call log options
From the call log list, tap More to access the
following options:
Received calls
- Details: view the details of a call.
This menu displays the most recent calls you have
received.
- Call: dial the number.
- Send message via: send a text or multimedia
message to the selected number.
- Use number: paste the selected number to the
dialling screen. You can add an area code and
dial the number, or edit and save it.
- Add to new contact: save the number in the
Phonebook.
- Add to existing contact: add the number to an
existing Phonebook entry.
- Remove: delete the call log.
- Remove all: delete all of the call logs.
Remove all
Use this menu to clear the call log list.
Call duration
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
Note! To reset call time, tap More and select Reset
all call durations.
Applications
47
You can learn how to work with your
phone’s tools and additional applications.
Alarm
World clock
To access this menu, press OK in Idle
mode and select Applications.
Use this menu to set a wake-up call to wake you up
in the morning or an alarm to alert you to an event
at a specific time.
Use this menu to find out the current time in
another part of the world.
To set an alarm
> Select an alarm.
Note! To add a new alarm, tap More and select
Create.
> Specify the alarm settings:
- Name: enter the alarm name.
- Activation: select On to activate the alarm.
- Time: enter the time for the alarm to sound.
- Repeat: select a repeat option.
- Alarm notification: select an alarm ringtone.
Note! If you set a music playlist as your alarm
ringtone, you must have the speaker open and
the phone on at the time of the notification.
Otherwise, the phone will emit a default
ringtone.
- Auto power-up: set the phone to switch on
and sound the alarm when it is time for the
alarm.
> Tap More and select Save to set the alarm.
To stop an alarm
When the alarm sounds, choose either of the
following options to stop the alarm:
- Select Stop to stop the alarm.
- Select Snooze to pause the alarm for 5 minutes.
You can do this a maximum of 5 times.
To deactivate an alarm
> From the alarm list, scroll to the alarm you want
to deactivate.
> Tap More and select Turn alarm off.
From the world map, turn the wheel clockwise or
counterclockwise to select the city you want. As the
time line moves, the current time and date of the
selected zone display.
48
>> Applications
Calculator
Currency converter
Voice memo
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
Use this menu to convert currency values.
Use this menu to record voice memos. A voice
memo can be up to one hour long.
> On the number keypad, scroll to a number and
press OK to select.
To insert a decimal point, select the decimal
point mark.
> Tap the math function field at the bottom of the
screen and select the function you want.
> Enter the second number.
> To view the result, select the equal sign (=).
> Select Unit on the upper field and select the
original unit using the wheel.
> Select the Amount input field.
> Enter the value to be converted and tap Done.
To insert a decimal point, select the decimal
point mark.
> Select Unit on the lower field and select the unit
to which you want to convert.
The equivalent value for the amount you entered
displays.
Note! You can edit the currency rate by tapping More
and selecting Set currency rate.
To record and save a voice memo
> Press OK to start recording.
> Speak into the microphone.
To pause recording, tap More and select Pause
recording.
To resume recording, tap More and select
Resume recording.
> When you have finished, press OK. The voice
memo is saved automatically.
To play a voice memo
> Slide the backside upwards to raise the
loudspeaker.
> From the voice memo screen, tap More and
select Go to voice memos.
> Select a voice memo. The voice memo plays.
During playback,
- To pause playback, press OK. To resume
playback, press OK again.
- To adjust the volume, move the wheel clockwise
or counterclockwise.
- To stop playback, tap More and select Stop.
To change voice memo settings
You can select a recording time before starting
recording.
From the voice memo screen, tap More and select
Settings to access the following options:
- Maximum (60 minutes): record a voice memo
up to one hour long.
- Suitable for messages: record a voice memo for
adding to a multimedia message.
- Suitable for email: record a voice memo for
adding to an email.
49
Memo
To do
Media player
Use this menu to make memos for things that are
important and manage them.
Use this menu to create and manage tasks you
have created.
You can play video files stored in your phone’s
memory using the media player.
To enter a memo
To enter a task
To save video files in the phone
> Tap More and select Create.
> Tap More and select Create.
> Enter a memo and tap Done, or tap More and
select Done.
> Enter information or change the settings:
You can play mp4, 3gp, and wmv files on your
phone.
To view a memo
From the memo list, select a memo.
- Title: enter information about the task.
- Download from the web browser.p. 36
- Date: enter the date.
- Copy from a PC using the optional Samsung PC
Studio. See Samsung PC Studio user guide.
- Due date: enter the date when the task is due.
- Priority: select a priority level.
To use memo options
From the memo list, tap More to access the
following options:
- View: view the memo details.
- Create: create a new memo.
- Send via: send the memo via MMS, email, or
Bluetooth.
- Delete: delete the selected memo.
> Tap More and select Save to save the task.
To view a task
On the task list, the icon indicates that the task
priority is high. A check mark indicates that the task
has been completed.
- Copy from a PC using your phone as a memory
disk.p. 21
- Receive via an active Bluetooth connection.
p. 53
- Synchronise with Windows Media Player on a
PC.p. 21
To play a video file
Scroll to a task and press OK to view it.
To use task options
- Delete all: delete all memos.
From the task list, tap More to access the following
options:
- Memory status: check information about the
memory currently in use.
- View: view the task details.
- Mark as done or Mark as not done: change
the task status.
- Create: create a new task.
- Send via: send the task via MMS, email, or
Bluetooth.
- Delete: delete the selected task.
> Slide the backside upwards to raise the
loudspeaker.
> Select the Videos folder.
> Select the file you want to play. The media player
opens.
> Use the following keys during playback:
- Press OK to pause or resume playback.
- Tap and hold the left arrow to scan backward
in a file.
- Tap and hold the right arrow to scan forward in
a file.
- Use the wheel to adjust the volume.
- Delete all: delete all tasks.
- Memory status: check information about the
memory currently in use.
To use media player options
While playing a file, tap More to access the
following options:
- Pause or Resume: pause or begin playback.
- Stop: stop playback.
- Send via: send the file via MMS, email, or
Bluetooth.
- Delete: delete the file.
Settings
50
Use this menu to customise your phone
settings. You can also reset the settings to
their default values.
To access this menu, press OK in Idle
mode and select Settings.
Time & date
Phone settings
Use this menu to change the time and date settings
for your phone.
Many different features of your phone’s system can
be customised to suit your preferences.
- Time zone: set the home time zone. Select the
city that corresponds to your home zone.
Language
- Daylight saving: apply daylight saving time to
your time zone.
Use this menu to select a language for the display
text.
- Time: enter the current time using the wheel.
Transfer mode
- Date: enter the current date using the wheel.
Use this menu to select a transfer mode (or USB
mode) that will be used when you connect your
phone to a PC via USB interface.
- Time format: select 12-hour or 24-hour time
format using the wheel.
- Manual: you can select a transfer mode after
you connect your phone to a PC. After
connecting, tap More in Idle mode and select
Connect to PC → a mode.
- PC Studio: you can use the Samsung PC Studio
programme to synchronise data and transfer
media files between the phone and a PC.
- MTP: you can use Media transfer mode to
transfer WMDRM (Windows Media Digital Rights
Management) content with licence keys directly
from the BeoPlayer or Windows Media Player to
the phone. You can also get new licence keys for
the DRM files that have expired licence keys.
- Mass storage: you can connect the phone to a
PC, as you would use an external memory disk
drive. MAC users should select this option to
transfer files to your phone.
Auto redial
Use this menu to set up the phone to redial a
phone number after an unsuccessful call. Ten
attempts can be preset.
Auto keylock
Use this menu to set the phone to lock the keys
automatically after the display turns off.
51
Display settings
Sound settings
Network services
Use this menu to change settings for the display
and backlight.
Use this menu to customise sound settings to suit
your preferences.
- Idle display: select a display item for the Idle
screen.
- Ringtone: select a ringtone for the call ringer.
Use this menu to access network services. Please
contact your service provider to check their
availability.
- Brightness: adjust the brightness of the display
for varying lighting conditions.
- Ring volume: select a ringtone volume.
Call diverting
- Ringtone type: specify how you are to be
informed of incoming calls.
This network service reroutes incoming calls to a
phone number that you specify.
- Backlight: select the length of time the backlight
of the display stays on.
Melody: the phone rings using the selected
ringtone.
- Dim: select the length of time the display is in
Dim mode after the backlight turns off. After a
specified time has elapsed, the display turns off.
Vibration: the phone vibrates but does not ring.
Vibration and melody: the phone vibrates and
rings at the same time.
Mute: the phone mutes the call ringer.
- Message tone: select a ringtone for incoming
messages.
- Message volume: select a ringtone volume for
incoming messages.
- Message tone type: specify how you are to be
informed of incoming messages.
- Alerts during calls: set the phone to beep when
you receive a new message, or when an alarm is
triggered during a call.
- Quiet mode: specify how the phone alerts you
to a specific event in Silent mode.
> Select the type of calls to be diverted.
> Select a call diverting option:
- Always divert: divert all calls.
- When busy: divert calls when you are busy
with another call.
- When no reply: divert calls when you do not
answer the phone.
- When unreachable: divert calls when you are
not in an area covered by your service provider
or when your phone is switched off.
- Cancel all: cancel all call diverting options.
> Select On on the upper field. To deactivate call
diverting, select Off.
> Select the Divert to field.
> Enter the number to which calls are to be
diverted, and tap Done.
> If you selected When no reply, move to the
Waiting time field and select the amount of
time the network waits before diverting a call.
> Tap More and select Save.
52
>> Settings
Call barring
Network selection
This network service allows you to restrict your
calls.
This network service allows you to manually select
the network to be used while roaming outside of
your home area, or to let the network be chosen
automatically.
> Select the type of calls to be barred.
> Select a call barring option:
- All outgoing calls: prohibit outgoing calls.
- Outgoing int’l calls: prohibit international
calls.
- Int’l call exc. Home: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
- All incoming calls: prohibit incoming calls.
- Incoming when roaming: prohibit incoming
calls when you use your phone outside of your
home service area.
- Cancel all: cancel all call barring settings.
> Select On on the upper field. To deactivate call
barring, select Off.
> Select the Password field.
> Enter the call barring password supplied by your
service provider and tap Done.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
Caller ID
This network service allows you to prevent your
phone number from being displayed on the phone
of the person being called. If you select Network
default, the phone will use the default setting
provided by the network.
Note! Some networks do not allow the user to
change this setting.
Voicemail
Use this menu to store or change the number of
the voicemail server.
Note! You must enter the voicemail server number
before you can access your voicemails. Your service
provider can give the voicemail server number.
> Tap More and select Save.
Band selection
Call waiting
This network service informs you when someone is
trying to reach you while you have another call.
> Select the type of calls to which the call waiting
option will apply.
> Select On. To deactivate call waiting, select Off.
For the phone to make and receive phone calls, it
must register with an available network. Your
phone can handle any of the following types of
networks: GSM 1900, Combined GSM 900 or
1800, and UMTS.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Bluetooth
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connection between all Bluetooth-compliant
devices within a range of 10 meters. Since the
devices communicate using radio waves, they do
not need to be in line of sight to each other.
Notes!
- If there are obstacles between the devices, the
operating distance may be reduced.
- It is recommended that you do not use the
Bluetooth feature while using multimedia
features such as voice recorder and camera, or
vice versa.
- Some devices, especially those that are not tested
or approved by Bluetooth SIG, may be
incompatible with your phone.
To set up the Bluetooth feature
The Bluetooth menu provides the following
options:
- Turn on or Turn off: activate or deactivate the
Bluetooth feature.
- My devices: search for connectable Bluetooth
devices.
- My phone’s visibility: allow other Bluetooth
devices to search for your phone.
- My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
- Secure mode: determine if the phone asks for
your confirmation when other devices access
your data.
- Bluetooth services: display available Bluetooth
services.
53
To search for and pair with a Bluetooth
device
> From the Bluetooth menu, select Turn on to
activate the Bluetooth feature.
> Select My devices.
> Select New search.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the type of device:
Mobile phone
Computer
Stereo headset
Hands-free car kit
PDA
Printer
Unknown device
The colour of the Bluetooth icon indicates the
status of the device:
Grey for unpaired devices
Blue for paired devices
Red for devices that are currently connected to
your phone
> Select a device.
> Enter a Bluetooth pincode and select
. This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
Note! Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth pincode, such as
0000. If the other device has a code, you must enter it.
To use device options
To send data via Bluetooth
From the paired device list, scroll to a device you
want and tap More to access the following
options:
> Activate the Bluetooth feature.
- Connect or Disconnect: connect to the headset
or hands-free car kit, or end the connection with
the connected device.
- Browse files: search for data from the device
and import data directly to your phone.
- Service list: display the Bluetooth service list for
the selected device.
- Rename: change the name of the device.
- Authorise device or Unauthorise device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
- Delete: remove the selected device from the
device list.
- Delete all: remove all devices from the device
list.
> Select an application, such as Phonebook,
Library, Organiser, Memo, or To do, in which
the item you want to send is stored.
> Scroll to the item you want.
> Tap More and select a sending option →
Bluetooth.
> For sending a contact, select which data you
want to send.
> Search for and select a device.
> If necessary, enter the Bluetooth pincode needed
for pairing and select
.
To receive data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its visibility
must be enabled.
> If an unauthorised Bluetooth device sends data
to your phone, select Yes to allow the device to
access your phone.
> Select Yes to receive data.
54
>> Settings
Security
Connection settings
Use this menu to protect the phone against
unauthorised use.
Use this menu to create and customise the profiles
containing the settings for connecting your phone
to the network. You need these settings to use the
web browser or send MMS messages or emails.
Note! If you enter an incorrect PIN /PIN2 three times, the
SIM card is blocked. To unblock it, you need to enter your
PUK/PUK2 (Personal Unblocking Key). The codes are
supplied by your network operator.
PIN check
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Change PIN
Use this menu to change your pincode. The
pincode check feature must be enabled to use this
feature.
Phone lock
This feature locks the phone from unauthorised
use.
When this feature is enabled, you must enter a 4to 8-digit phone password each time the phone is
switched on.
Note! The password is preset to 00000000. To
change the password, use the Change password
menu.
Change password
Use this menu to change your phone password.
Privacy
Use this menu to lock all menu options on the
phone, except call functions.
When this feature is enabled, you must enter the
phone password to access menu functions.
SIM lock
The SIM lock feature allows your phone to work
only with the current SIM by assigning a SIM lock
code. You must enter the SIM lock code to use a
different SIM card.
Note! Your phone is set up by default for connecting to
the network. If you change the settings without first
checking with your service provider, the web browser,
MMS, and email features may not work properly.
To create a profile
- Static DNS: specify if you want to manually
enter the DNS (Domain Name Server) address;
see the Server 1 option. If you want the
address to be automatically assigned by the
server, select Off.
- Server 1: enter the DNS address, if you
selected Static DNS.
- Traffic class: select the traffic class.
> Tap More and select Save to save the profile.
To use profile options
Tap More to access the following options:
> Select Create. If a profile has previously been
saved, tap More and select Create.
- Edit: edit the profile.
> Set profile parameters:
- Create: add a new profile.
- Name: enter a name for the profile.
- Delete: delete the selected profile.
- Access point: edit the access point name used
for the address of the GPRS network gateway.
- Delete all: delete all profiles.
- Authentication: choose the type of
authentication used.
- User ID: enter the user ID.
- Password: enter the user password.
- Protocol: select the protocol among HTTP,
WAP, and Other.
- Home URL: enter the URL address of the page
to be used as your homepage.
- Gateway address: (WAP only) enter the
gateway address of the proxy server.
- Proxy address and Port: (HTTP only) set the
proxy server address and port.
- Secure connection: (WAP only) turn the
secure mode on or off.
- Idle time (sec.): set a time period after which
the network is disconnected if there has been
no new data traffic in that time.
- Static IP: specify if you want to manually enter
an IP address; see the Local phone IP option. If
you want the IP address to be automatically
assigned by the server, select Off.
- Local phone IP: enter the IP address obtained
from the service provider, if you selected Static
IP.
55
DRM licences
Use this menu to manage the licence keys you have
acquired to activate media files locked by DRM
systems.
Tap More to access the following options:
- Play/ view: open the corresponding item.
- Delete: delete the selected licence key.
- Delete all: delete all licence keys.
- Details: access the properties of the licence key.
Memory settings
Use this menu to check the amount of memory
being used for storing data and clear the memory.
Master reset
Use this menu to reset all the settings in your phone
at the same time.
> Select Yes.
> Enter the phone password and select
.
Note! The password is preset to 00000000. You can
change this password.p. 54
The phone automatically switches itself off and
then back on.
SIM services
56
To access this menu, press OK in Idle
mode and select SIM services.
This menu is available if you use a SIM card that
supports SIM Application Toolkit menus and
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s plans.
For details, see your SIM card instructions or
contact your service provider.
Solve problems
To save the time and expense of an
unnecessary service call, perform the
simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Please insert SIM card”
- Make sure that the SIM card is correctly installed.
“Enter password”
- The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“Enter PIN”
- You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
- The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
“Enter PUK”
- The PIN was entered incorrectly three times, and
the SIM card is now blocked. Enter the PUK
supplied by your service provider.
57
“No service” or “Network failure” displays
- The network connection has been lost. You may
be in a weak signal area. Move and try again.
- You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
- Make sure that you have pressed SEND.
- Make sure that you have accessed the right
cellular network.
- Make sure that you have not set an outgoing call
barring option.
A caller cannot reach you
- Make sure that your phone is switched on. (Press
END for more than one second.)
- Make sure that you are accessing the right
cellular network.
- Make sure that you have not set an incoming call
barring option.
58
>> Solve problems
Your voice is not heard at the other end
CONTACT A SERVICE CENTRE
- Make sure that you have switched on the
microphone.
If you have attempted the troubleshooting solution
and are still having problems with your phone,
make a note of the following and contact your local
retailer, your local Bang & Olufsen store, or
Samsung after-sales service
- Make sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
The phone beeps and “Low battery” flashes on
the display
- Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
- Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
- Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
- Use the Contacts menu to ensure the number
has been stored correctly.
- Store the number again, if necessary.
The battery does not charge properly or the
phone sometimes switches itself off
- Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
- Model number(s) of your phone
- Serial number(s) of your phone
- A clear description of the problem
Health and safety information
59
SAR certification information
Precautions when using batteries
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
- Never use a charger or battery that is damaged in
any way.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
- Use the battery only for its intended purpose.
The exposure standard for mobile phones employs
a unit of measurement known as Specific
Absorption Rate (SAR). The SAR limit recommended
by the EU Council is 2.0 W/kg.*
The highest SAR value for this model phone was
0.245 W/kg.
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
- If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
- Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time is
noticeably shorter than normal, it is time to buy a
new battery.
- If left unused, a fully charged battery will
discharge itself over time.
- Use only Samsung or Bang & Olufsen approved
batteries, and recharge your battery only with
Samsung or Bang & Olufsen approved chargers.
Disconnect the charger from the power source
when it is not in use. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
- Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
- Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0°C (32°F).
- Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do not
carry a spare battery in a pocket or bag where
the battery may contact metal objects. Shortcircuiting the terminals may damage the battery
or the object causing the short-circuiting.
- Dispose of used batteries in accordance with
local regulations. Always recycle. Do not dispose
of batteries in a fire.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
60
>> Health and safety information
Road safety
Hearing aids
Potentially explosive environments
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
When driving a car, driving is your first
responsibility. When using your wireless phone
while driving, follow local regulations in the country
or region you are in.
Operating environment
Remember to follow any special regulations in force
in the area you are in, and always switch off your
phone whenever it is forbidden to use it, or when it
may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position.
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas, such as propane or butane, areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to switch off
your vehicle engine.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as
well as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications like medical
emergencies.
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
> Switch on the phone.
> Enter the emergency number for your present
location. Emergency numbers vary by location.
> Press SEND.
Certain features like Call Barring may need to be
deactivated before you can make an emergency
call. Consult this document and your local cellular
service provider.
61
General precautions
Other important safety information
Care and maintenance
- Damage requiring service: Unplug the phone
from the electrical outlet and refer servicing to an
authorised service technician or provider under
the following conditions:
- Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
- Liquid has been spilled or an object has fallen
into the product.
- The phone has been exposed to rain or water.
- The phone has been dropped or damaged.
- There are noticeable signs of overheating.
- The phone does not operate normally when
you follow the operating instructions.
- Avoid hot areas: The product should be placed
away from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
- Avoid wet areas: Never use the product in a wet
location.
- Avoid pushing objects into product: Never
push objects of any kind into cabinet slots or
other openings in the product. Slots and
openings are provided for ventilation. These
openings must not be blocked or covered.
- Mounting Accessories: Do not use the phone
on an unstable table, cart, stand, tripod, or
bracket. Any mounting of the phone should
follow the manufacturer’s instructions, and
should use a mounting accessory recommended
by the manufacturer.
- Avoid unstable mounting: Do not place the
phone with an unstable base.
- Use the phone with approved equipment:
This phone should be used only with personal
computers and options identified as suitable for
use with your equipment.
- Adjust the volume: Turn down the volume
before using headphones or other audio devices.
- Cleaning: Unplug the phone from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a soft cloth for cleaning,
but NEVER use water to clean the phone, the
display, and its parts.
- Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
- Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts, or accessories.
- For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag
or in the air bag deployment area. Improperly
installed wireless equipment could result in
serious injury if the air bag inflates.
- Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use wireless
phones in an aircraft because they can interfere
with the operation of the aircraft.
- Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
- Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may accidentally damage these things or choke
on small parts.
- Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
- Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
- Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
- Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
- Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
- Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
- Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it
with a soft cloth.
- Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
- Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator. The
phone may explode when overheated.
- When the phone or battery gets wet, the label
indicating water damage inside the phone
changes colour. In this case, phone repairs are no
longer guaranteed by the manufacturer's
warranty, even if the warranty for your phone has
not expired.
- If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
62
Index
holding • 26
making • 25
redialling • 25
rejecting • 25
transferring • 27
waiting • 52
A
Alarm • 47
Answering
call • 25
second call • 26
,
Archive messages • 33
CB (Cell Broadcast) messages • 31
Auto keylock • 50
Characters, enter • 15
Auto redial • 50
Connecting to PC • 21
,
50
,
44
35
Connection
B
Bluetooth • 52
USB • 50
Backlight time, set • 51
Band selection • 52
Copying, contacts • 43
Barring, calls • 52
Creating messages
email • 29
multimedia message • 29
text message • 28
Battery
charging • 11
inserting • 11
precautions • 59
Currency converter • 48
BeoPlayer • 21
D
Bluetooth
,
,
receiving, data • 20 53
sending, data • 20 53
settings • 52
Date, set • 50
Daylight saving time • 50
Deleting
Bookmarks • 37
call logs • 46
document files • 42
emails • 31 32
images • 41
multimedia message • 30
phonebook • 43 45
sounds • 41
text message • 30 32
videos • 42
Broadcast messages
,
setting • 35
viewing • 31
Browser, web • 36
,
Business card • 44
,
32
,
C
Calculator • 48
Delivery reports, message • 33
Calendar • 39
Dialled calls • 46
Call duration • 46
Display
backlight • 51
brightness • 51
language • 50
settings • 51
Call log
dialled • 46
missed • 46
received • 46
Call ringtone, set • 51
Caller group
creating • 44
options • 44
Display operation • 12
Diverting, calls • 51
DRM (Digital Rights Management) • 55
DTMF tones, send • 27
Caller ID • 52
E
Calls
answering • 25
barring • 52
diverting • 51
Emails
creating and sending • 29
deleting • 31
63
locking • 54
password • 54
phone layout • 9
resetting • 55
unpacking • 9
memo • 49
messages • 35
phonebook • 45
to do • 49
setting • 34
viewing • 31
Emergency calls • 60
Message ringtone • 51
F
Forwarding
Phonebook
Messages
,
broadcast • 31 35
configuration • 31
email • 29 31
multimedia message • 29
push • 31 35
text message • 28 30
email • 31
multimedia message • 30
text message • 30
,
,
H
Health and safety • 59
Missed alerts • 40
Holding, call • 26
Missed calls • 46
,
creating and sending • 29
deleting • 30
setting • 33
viewing • 30
Icons, description • 10
Images
deleting • 41
viewing a slide show • 41
viewing • 41
creating a playlist • 23
downloading files • 21
options • 23
playing music • 22
synchronising • 21
email • 31
text and multimedia message • 30
Internet • 36
Photos
deleting • 41
viewing • 41
PIN, change • 54
Privacy • 54
Problems, solve • 57
Push messages
Music player
Inbox, messages
International calls • 25
30
,
MMS messages
I
adding • 43
copying • 44
deleting • 43
editing • 43
finding • 43
options • 43
setting • 35
viewing • 31
Q
Quiet mode
entering • 17
setting • 51
Muting
key tones • 27
microphone • 27
R
K
Key tones, send or mute • 27
Received calls • 46
N
Name card • 44
L
Received messages
email • 31
multimedia message • 30
text message • 30
Names
Language, select • 50
entering • 15
storing • 43
Last number, redial • 25
Locking
menu functions • 54
phone • 54
SIM card • 54
Network band, select • 52
Network selection • 52
Recent calls • 46
Redialling
automatically • 50
manually • 25
Network services • 51
Resetting phone • 55
O
M
Master reset • 55
Media player
downloading files • 49
options • 49
playing videos • 49
Memo • 49
Memory status
calendar • 40
library • 42
Ringtone
Outbox, messages • 32
P
call • 51
message • 51
Road safety • 60
Password
call barring • 52
phone • 54
Phone
care and maintenance • 61
icons • 10
Roaming • 52
S
Safety, information • 4
Security, calls • 54
Sent messages • 32
,
59
64
>> Index
W
Silent mode
entering • 17
setting • 51
Waiting call • 52
Web browser, access • 36
SIM card
Windows Media Player • 21
inserting • 11
locking • 54
World clock • 47
SMS messages
creating and sending • 28
deleting • 30
setting • 33
viewing • 30
Solving problems • 57
Sound settings • 51
Sounds
deleting • 41
playing • 41
Switching on or off
key tones • 27
microphone • 27
Synchronising • 21
,
24
T
Text input mode, change • 15
Text, enter • 15
Time, set • 50
To do (task) • 49
Touch screen, use • 12
Transfer mode, select • 50
Transferring, calls • 27
U
UMTS network • 10
USB mode, select • 50
USIM card • 11
V
Videos
deleting • 42
playing • 42
Voice memos
playing • 48
recording • 48
Voicemail server
connecting • 19
editing • 52
Volume
call ringtone • 51
message ringtone • 51
* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match
your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations in this guide.
www.serenatamobile.com
English. 10/2007. Rev. 1.0