Eads Telecom CARK-9 User guide

Proprietary Information and Contents
ii
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
3rd Edition (August 11, 2004)
© Copyright 2004 EADS TELECOM North America Inc. All rights reserved.
Information in this manual is subject to change with product revisions. Technical
Publications will incorporate such changes into new editions of the publications. EADS
TELECOM North America may add features or enhancements to the product(s) and/or
program(s) described in this manual at any time. EADS TELECOM North America
Technical Publications freezes the information in this manual based on the software and
hardware releases on which the information in the manual is based and will not include
updates until the next release.
The application described in this manual is furnished under a license agreement and may
be used or copied only in accordance with the terms of the agreement.
Contact Information
Address any reader comments to:
EADS TELECOM North America Inc.
Technical Publications Manager, M/S 1N
2811 Internet Boulevard
Frisco, TX 75034-1851
You may also send email to techpubs@eadstelecom-na.com.
H
H
What to Expect when Contacting Company
Technical Publications will email responses to customers within seven business days of
the contact. Note that product support is not available through this email address. For
product support, contact the EADS TELECOM North America Customer Service Center
(CSC) at 1-800-729-1872. EADS TELECOM North America may use or distribute
review comments and information without incurring obligation.
Trademarks and Acknowledgements
Product registered trademarks and copyrights of the products included in this publication
include:
PointSpan®, Centergy®, and Automatic Call Distribution (ACD) ® as registered
trademarks of EADS TELECOM North America Inc.
This document identifies all other products or services mentioned herein by the
trademarks, service marks, or product names designated by the companies that market
those products. The companies producing these trademarks and registered trademarks
control ownership of them. Make all inquiries concerning such trademarks directly to
those companies.
EADS TELECOM North America Inc. - 2569-003
M
M
iii
Proprietary Information and Contents
Revision History
The following represents the revision history of this document:
iv
M
M
Revision
Number
Date
Completed
Point of
Contact
003
08.11.2004
EADS TELECOM
North America Technical Publications
Removed Analog Option Board
Reference
002
04.28.2004
EADS TELECOM
North America Technical Publications
Update to reflect product
modifications and North
American marketing information.
001
08.08.2003
EADS TELECOM
North America Technical Publications
Initial release of this publication.
Description
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Table of Contents
About This Publication ......................................................................................................... xv
Audience ........................................................................................................................... xv
Publication Organization .................................................................................................. xv
Conventions Used In This Publication ............................................................................. xv
References........................................................................................................................ xvi
Chapter 1 Basic Information.................................................................................................. 1
ITE-780 Description ........................................................................................................... 1
Using the ITE-780 ........................................................................................................ 2
ITE-780............................................................................................................................... 3
Expansion Module Accessory for the ITE-780................................................................... 4
Recommendations and Safety............................................................................................. 4
Connections.................................................................................................................. 4
Environment ................................................................................................................. 4
"CE" Marking............................................................................................................... 4
Maintenance ................................................................................................................. 4
ITE-780 Connections .......................................................................................................... 5
ITE-780 Screen ................................................................................................................... 6
Key Description .................................................................................................................. 7
The Navigator............................................................................................................... 7
Navigator Keys............................................................................................................. 7
Other Keys.................................................................................................................... 7
Touch Screen Icons............................................................................................................. 8
Alert Icon ............................................................................................................................ 9
Alphabetic Keypad Screen................................................................................................ 10
The Main Alphabetic Keypad .................................................................................... 10
Lower Case and Special Characters ........................................................................... 10
Icons and Lamps ............................................................................................................... 11
EADS TELECOM North America Inc. - 2569-003
M
M
v
About This Publication
Icon Lamps for Feature Keys ..................................................................................... 11
Other Lamps ............................................................................................................... 11
Message Lamp .................................................................................................................. 12
Ring Types........................................................................................................................ 12
System Tones.................................................................................................................... 13
System Voice Prompts...................................................................................................... 13
Calculator.......................................................................................................................... 14
Access the Calculator ................................................................................................. 14
Memo ................................................................................................................................ 14
Create a Memo ........................................................................................................... 15
Modify a Memo.......................................................................................................... 15
Delete a Memo ........................................................................................................... 15
Place a Call ....................................................................................................................... 16
Get Dial Tone ............................................................................................................. 16
Place an Internal Call ................................................................................................. 16
Place an External Call ................................................................................................ 16
Dial by Name from the Personal Directory................................................................ 16
Dial by Name from the System Directory.................................................................. 17
Dial with Abbreviated Dial ........................................................................................ 17
Dial with Auto Dial .................................................................................................... 17
Dial with Redial ......................................................................................................... 17
Dial with the Incoming Calls Log .............................................................................. 17
Answer a Call.................................................................................................................... 17
End a Call.......................................................................................................................... 17
Chapter 2 Phone Settings...................................................................................................... 19
Volume Settings and Ring Settings .................................................................................. 19
Access the Setting Adjustment Screen ....................................................................... 19
Adjust the Key Beep Volume..................................................................................... 19
Change Ring Melody and Adjust Ring Melody Volume ........................................... 20
Adjust the Handset Volume ....................................................................................... 21
vi
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Adjust the Speaker Volume........................................................................................ 22
Adjust Headset Volume.............................................................................................. 22
Adjust Keypad Type................................................................................................... 23
Direct Call .................................................................................................................. 23
Screen Adjustments .......................................................................................................... 23
Screen Adjustment Screen.......................................................................................... 24
Access the Screen Adjustment Feature ...................................................................... 24
Change the Screen Standby Time Setting .................................................................. 24
Adjust the Screen Contrast ......................................................................................... 25
Calibrate the Screen ................................................................................................... 25
Clean the Touch Screen.............................................................................................. 26
Listening Volume ............................................................................................................. 26
Feature Keys ..................................................................................................................... 27
Label the Keys............................................................................................................ 27
Chapter 3 Modes of Operation............................................................................................. 29
Speaker.............................................................................................................................. 29
Activate the Speaker................................................................................................... 29
Deactivate the Speaker ............................................................................................... 29
Mute .................................................................................................................................. 30
Activate and Deactivate the Mute Feature ................................................................. 30
Hands Free Auto-Answer ................................................................................................. 30
Activate Hands Free Auto-Answer ............................................................................ 31
Deactivate Hands Free Auto-Answer......................................................................... 31
Answer a Call with Hands Free Auto-Answer Activated .......................................... 32
End a Call with Hands Free Auto-Answer Activated ................................................ 32
Chapter 4 Features................................................................................................................ 33
Abbreviated Dial............................................................................................................... 33
Abbreviated Dial Methods ......................................................................................... 33
Program an Abbreviated Dial Number....................................................................... 33
EADS TELECOM North America Inc. - 2569-003
M
M
vii
About This Publication
Other Softkeys Used with Abbreviated Dial .............................................................. 35
Modify an Abbreviated Dial Number ........................................................................ 35
Use the Directory Key to dial an Abbreviated Dial Number ..................................... 35
Use the Abbreviated Dial Feature Key....................................................................... 36
Display Abbreviated Dial Numbers ........................................................................... 36
Answer/Release ................................................................................................................ 37
Use the Answer Release Key ..................................................................................... 37
Auto Dial........................................................................................................................... 38
Program an Auto Dial Key......................................................................................... 38
Other Softkeys Used with Auto Dial.......................................................................... 39
Modify an Auto Dial Number .................................................................................... 39
Use an Auto Dial Number .......................................................................................... 39
Display an Auto Dial Number.................................................................................... 40
Busy Override ................................................................................................................... 40
Override a Busy Extension......................................................................................... 41
Buzz/Status ....................................................................................................................... 41
Place a Buzz Call to a Status User ............................................................................. 42
Answer a Buzz Call from a Status User ..................................................................... 42
Place a Status Call to a Buzz User ............................................................................. 43
Answer a Call from a Buzz User................................................................................ 43
Callback ............................................................................................................................ 43
Place a Callback on a Busy Extension ....................................................................... 44
Answer a Returned Callback...................................................................................... 45
Return a Callback ....................................................................................................... 45
Display a Callback ..................................................................................................... 46
Display and Cancel a Callback................................................................................... 46
Call Forward ..................................................................................................................... 47
Program Call Forward ................................................................................................ 47
Turn Off Call Forward using Softkeys....................................................................... 48
viii
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Other Softkeys Used with Call Forward .................................................................... 49
Set up Call Forward with the Feature Key ................................................................. 49
Turn Off Call Forward with the Feature Key............................................................. 50
Call Mark .......................................................................................................................... 50
Mark a Call................................................................................................................. 50
Call Park ........................................................................................................................... 50
Park a Call .................................................................................................................. 51
Pick Up a Parked Call from Any Phone in the System .............................................. 51
Call Pickup........................................................................................................................ 52
Pick up a Call as Member of a Call Pickup Group..................................................... 52
Pick up a Call by Dialing the Extension Number....................................................... 52
Call Waiting...................................................................................................................... 53
Accept a Call Waiting ................................................................................................ 54
Alternate Between Calls............................................................................................. 55
Return to the Holding Party when One Party Hangs Up............................................ 55
Cancel ............................................................................................................................... 55
Use Cancel.................................................................................................................. 56
Conference ........................................................................................................................ 56
Conference up to Seven Parties.................................................................................. 56
Leave the Conference and Return .............................................................................. 57
Leave the Conference Permanently............................................................................ 58
Data Calls.......................................................................................................................... 58
Use Data Features....................................................................................................... 58
Do Not Disturb.................................................................................................................. 59
Activate Do Not Disturb............................................................................................. 59
Deactivate Do Not Disturb ......................................................................................... 59
Event Timer Display ......................................................................................................... 59
Use the Event Timer................................................................................................... 60
Group Listen ..................................................................................................................... 60
EADS TELECOM North America Inc. - 2569-003
M
M
ix
About This Publication
Add Group Listen Parties to a Conference................................................................. 60
Rejoin the Conference ................................................................................................ 61
Hold .................................................................................................................................. 62
Place a Call on Hold................................................................................................... 62
Retrieve a Party on Hold ............................................................................................ 63
Place a Call when a Party is On Hold and Alternate Between Calls.......................... 63
Toggle between Held Calls ........................................................................................ 63
Hotline Conference ........................................................................................................... 64
Initiate a Hotline Conference Call.............................................................................. 64
Accept a Hotline Conference Call.............................................................................. 64
Hotline .............................................................................................................................. 65
Use Hotline................................................................................................................. 65
Intercom ............................................................................................................................ 65
Place an Intercom Call ............................................................................................... 66
Answer an Intercom Call............................................................................................ 66
Meet-Me Conference ........................................................................................................ 66
Enter a Meet-Me Conference ..................................................................................... 67
Leave a Meet-Me Conference .................................................................................... 67
Lock and Unlock a Meet-Me Conference .................................................................. 67
Accept a Call Waiting During a Meet-Me Conference .............................................. 68
Transfer an Outside Call to a Meet-Me Conference .................................................. 68
Privacy Release................................................................................................................. 69
Use Privacy Release ................................................................................................... 69
Cancel Privacy Release .............................................................................................. 70
Queue for External Lines .................................................................................................. 70
Use Callback Queuing................................................................................................ 70
Receive an Automatic Callback ................................................................................. 71
Cancel the Callback.................................................................................................... 71
Use Online Queuing ................................................................................................... 72
x
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Redial ................................................................................................................................ 72
Use the Redial Softkey ............................................................................................... 72
Use the Green Key and the Outgoing Calls Log ........................................................ 72
Use the Last Number Redial Feature Key.................................................................. 73
Display the Redial Number ........................................................................................ 73
Display using the Outgoing Calls Log ....................................................................... 74
Transfer............................................................................................................................. 74
Initiate an Announced Transfer .................................................................................. 74
Initiate an Unannounced Transfer .............................................................................. 75
Return to the Transferred Party .................................................................................. 75
Return to Transferred Party after Connection to Voice Mail ..................................... 75
Voice Mail ........................................................................................................................ 76
Message Lamp Status................................................................................................. 76
Access Voice Mail ..................................................................................................... 76
Retrieve a Message from another Phone or Outside Location ................................... 77
Chapter 5 Directories and Logs ........................................................................................... 79
Directories and Logs......................................................................................................... 79
Private Directory............................................................................................................... 79
Private Directory Screen ............................................................................................ 80
Screen Icons used with the Private Directory............................................................. 80
Access the Private Directory ...................................................................................... 81
Create a List in the Private Directory ......................................................................... 81
Create a Record in a Private Directory List................................................................ 83
Search for a Record in a Private Directory List ......................................................... 84
Search by Name in the Private Directory ................................................................... 84
Modify a Record in the Private Directory .................................................................. 85
Delete a Record in the Private Directory.................................................................... 86
Modify a Private Directory List ................................................................................. 86
Delete a Private Directory List................................................................................... 87
EADS TELECOM North America Inc. - 2569-003
M
M
xi
About This Publication
Place a Call from the Private Directory...................................................................... 87
Delete All Records from the Private Directory .......................................................... 88
Information Directory ....................................................................................................... 89
Information Directory Screen..................................................................................... 89
View the Information Directory ................................................................................. 89
Access the Information Directory .............................................................................. 90
Add Personal Numbers............................................................................................... 90
Enter the Welcome Message ...................................................................................... 91
Modify or Delete Information .................................................................................... 91
Incoming Calls Log .......................................................................................................... 92
Incoming Calls Log Screen ........................................................................................ 93
Message Lamp Status................................................................................................. 93
Log Icon on Screen .................................................................................................... 93
Call Record Display ................................................................................................... 93
Access the Incoming Calls Log.................................................................................. 94
Place a Call from the Incoming Calls Log ................................................................. 94
View the Private Directory from the Incoming Calls Log ......................................... 95
Store a Record into the Private Directory................................................................... 96
Delete an Incoming Calls Log Record ....................................................................... 96
Outgoing Calls (LNR) Log ............................................................................................... 97
Outgoing Calls Log Screen ........................................................................................ 97
View the Outgoing Calls Log..................................................................................... 98
Place a Call from the Outgoing Calls Log.................................................................. 98
View the Private Directory from the Outgoing Calls Log.......................................... 98
Store a Record into the Private Directory................................................................... 99
Delete a Record from the Outgoing Calls Log......................................................... 100
System Name/Number Directory.................................................................................... 100
Dial a Party from the System Name/Number Directory .......................................... 101
Chapter 6 Feature Codes .................................................................................................... 103
xii
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Feature Codes ................................................................................................................. 103
Numeric Feature Codes .................................................................................................. 104
Chapter 7 Telephone Tests ................................................................................................. 105
Telephone Tests .............................................................................................................. 105
Basic Procedures ...................................................................................................... 105
Basic Telephone Self-Test........................................................................................ 105
Key Lamps Test ....................................................................................................... 106
Informational Tests .................................................................................................. 107
System Tone Tests ................................................................................................... 108
Appendix I Glossary............................................................................................................ 111
Glossary .......................................................................................................................... 111
Appendix II Troubleshooting ............................................................................................. 115
Troubleshooting .............................................................................................................. 115
EADS TELECOM North America Inc. - 2569-003
M
M
xiii
About This Publication
xiv
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
About This Publication
The ITE-780 User Guide describes the phone and its primary functions.
Audience
Any user of the ITE-780 telephone should reference this publication.
Publication Organization
This publication contains the following chapters.
Chapter
Topic
Description
Chapter 1
Basic Information
Provides basic information for the ITE-780
Chapter 2
Phone Settings
Provides procedures for the phone settings
Chapter 3
Modes of Operation
Provides procedures for modes of phone operation
Chapter 4
Features
Provides procedures for the features
Chapter 5
Directories and Logs
Provides information about the phone directories
and logs and the System Name/Number directory
Chapter 6
Feature Codes
Defines the feature codes
Chapter 7
Telephone Tests
Provides procedures for testing phones
Conventions Used In This Publication
This manual uses the following document conventions to help you identify different types
of information.
Convention
Description
Example
Angle brackets
<>
Key names
Keys to press
Press <Enter> to accept the
default value.
Bold text
Characters to enter when
referenced in a procedure
In the example, select the
DTMF group type.
(Italics)
Explanatory text within a
command sample and
Chapter Title Designations
(Building Ports)
Courier
Example of output that a
system displays
Enter Password (and
Username)
EADS TELECOM North America Inc. - 2569-003
M
M
xv
About This Publication
Convention
Description
Example
Horizontal Ellipses
Horizontal line omissions in
a command sequence
...
Vertical Ellipses
Vertical line omissions in a
command sequence
.
.
.
Provides supplemental
information.
The prompt may not display
if …
Provides information to
help you avoid possible
damage to hardware or a
system crash (without data
loss).
Use case sensitive
commands to keep from
destroying…
Provides information to
ensure that you avoid
danger, death, or permanent
damage to a system.
DO NOT touch exposed
wires.
Action column
In a step/action/result table,
contains an instruction.
Type SPAR.
Result column
In a step/action/result table,
contains anything important
that the action causes to
happen.
The console displays the
new parameter values.
References
The following publications provide related information.
xvi
M
M
Publication Number
Title
Description
2567-xxx
ITE-780 Quick Reference
Abbreviated version of the ITE780 User Guide.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 1
Basic Information
ITE-780 Description
The ITE-780 digital phone gives you access to all services and features available on the
PointSpan 6880 Series PBXs and additional features that are unique to the phone itself.
The following are some of the features of the ITE-780 phone.
Feature
Description
Touch Screen
Display
Provides access to the following using a separate stylus to point to
items on the screen:
• Caller ID
• Feature keys
• Private Directory
• Incoming Calls Log
• Alphabetic and Numeric Keypads
• Phone configuration
• Key labeling
• Calculator
• Memo
• Phone Lock
5 Softkeys
Provide access to a menu of specific functions that change
according to the state of the phone.
60 Feature Keys
Provide access to features, auto dial numbers, etc.
Icon Lamps for the
Feature Keys
Show the status of the feature, such as:
• Incoming call
• Call waiting
• Call connected or feature activated
• Line free or feature deactivated
Navigator Keys
Provide access to call handling and phone administrative functions
Private Directory
Provides a personal directory of 200 numbers that can be
categorized into 9 different lists
Incoming Calls Log
Provides recorded details of the last 50 incoming calls to the phone
Outgoing Calls Log
Provides recorded details of the last 10 numbers dialed from the
phone
EADS TELECOM North America Inc. - 2569-003
M
M
1
Chapter 1, Basic Information
Feature
Description
Hands-Free
Operation
Allows the user to place or receive a call without lifting the
handset
Speaker
Allows the conversation to take place over a speaker
Mute
Turns off the microphone so that the other party cannot hear the
conversation
Using the ITE-780
The following are things to remember when using the ITE-780 phone:
•
The features on your ITE-780 phone are selected for your specific needs. Some
features described in this guide may not be available to you on your phone. If you
have any questions about the features on your phone, contact your system
administrator.
•
If your feature keys are not labeled, contact your system administrator.
•
On a phone with more than one extension, press the button on the extension that you
want to use before lifting your handset or pressing the speaker button.
•
The
•
You can initiate a call with the
Red key will terminate or abort any process or function.
using the Speaker key. The
2
M
M
Speaker key, but you cannot hang up a call
Red key must be used to disconnect a call.
•
You can use your phone to make voice and data calls at the same time.
•
When talking on an extension that is shared by others, your phone conversation
remains private and cannot be interrupted by anyone else unless the Privacy Release
feature is used.
•
If you hear a fast busy tone when attempting to use a feature, it usually indicates that
the feature cannot be used on your phone.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
ITE-780
EADS TELECOM North America Inc. - 2569-003
M
M
3
Chapter 1, Basic Information
Expansion Module Accessory for the ITE-780
The M710 Button Expansion Module is an accessory that adds 20 feature keys to the
ITE-780 telephone. With the M710 attached, a user can access these 20 lines or features
either on the ITE-780 touch screen virtual keys or from the M710 buttons.
The ITE-780 can accommodate up to three M710 modules, providing 60 total keys. In
this configuration, the first module duplicates virtual buttons 1 through 20. A second
duplicates virtual buttons 21 through 40, and a third duplicates virtual buttons 41 through
60.
Recommendations and Safety
Connections
The ITE-780 telephone cannot be connected to the public network. It is designed for the
PointSpan M6880 Series PBX.
Environment
The ITE-780 must be operated at temperatures between 42°F and 113°F. Do not install
the phone in a damp room or near a water source.
"CE" Marking
This marking on the bottom of the phone certifies the conformity of the equipment with
the regulations that apply in accordance with the directive R & TTE 1999/5/EC.
Maintenance
The ITE-780 telephone will retain its new appearance if you do not use any solvents or
household cleaning products. Use a cloth dampened in slightly soapy water, and then
wipe with a dry cloth.
4
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
ITE-780 Connections
ITE-780 Connections
ITE Digital Line
Connector at the
back of the phone
Headset
Connector
Handset
Connector
NOT USED
Expansion Module
Connector
EADS TELECOM North America Inc. - 2569-003
M
M
5
Chapter 1, Basic Information
ITE-780 Screen
The ITE 780 touch screen provides information and quick access to the displayed
functions. A stylus is provided with the phone to use as a pointer for the screen.
6
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Key Description
The Navigator
The Navigator allows you to scroll through the different menus that make up a selection.
Navigator
Description
The Navigator is made up of four direction keys and one central
key.
Navigator Keys
Key Symbol
Description
And
Used to display a selection or a record in a directory
And
Used to display additional information about a record or carries
out a setting
Used to confirm a choice, a setting, or a record in a directory
Other Keys
Key Symbol
Key
Green Key
Red Key
Directory Key
Program Key
Speaker Key
Mute Key
EADS TELECOM North America Inc. - 2569-003
Description
• Answers an incoming call if phone is on hook
• Calls a number displayed in a directory of log
• Displays and calls back the last number dialed
• Disconnects ringing during an incoming call
• Ends a call
• Cancels a programming setting or ends a
programming sequence
• Accesses the Abbreviated Dial feature
•
•
•
•
Accesses ring and contrast settings
Accesses directory and log management
Accesses programming for numbers and features
Enables the speaker mode
• Cuts off the microphone in the handset, headset,
or speaker so that you can talk without the caller
hearing you
M
M
7
Chapter 1, Basic Information
Key Symbol
Key
"R" Key
Description
• Functions as a Hold key during a call
• Accesses the voice mail system when the phone
is onhook
Touch Screen Icons
Icon
8
M
M
Name
Description
Same as the Red
key on the
Navigator
• Disconnects ringing during an incoming call
• Ends a call
• Cancels a programming setting or ends a
programming sequence
Configuration
Accesses volume settings and ring settings and other
phone settings
Memo
Accesses the memo function
Calculator
Accesses the calculator function
Lock
Accesses the locking function of the phone
Label
Accesses the key labeling function
Direct
Accesses the Private directory
ABC
Accesses the alphabetic keypad screen
Log
Accesses the Incoming Calls log
LNR
Accesses the Outgoing (LNR-Last Number Redial)
Calls log
Expand
Expands the key display from 6 keys to 12 keys
Contract
Contracts the key display from 12 keys to 6 keys
Alert
Provides fast access to the last key that went active
and has a flashing lamp
Home
Returns to the main screen display
Ringer Off
Indicates that the ringer has been completely turned
off
Call
Calls the party that is displayed on the screen
Create New Record
Creates a new record in the Private directory
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Icon
Name
Description
Create/Modify List
Creates or modifies a list
Search
Searches for a record
Delete
Deletes a record in a directory or log
Abc
Accesses the alphabetic keypad screen
Backspace
Backspaces over characters in the alphabetic screen
Forward
Go forward to the next display
Go Backward
Goes back to the previous display
Return
Returns to the main log display
Go Forward
Displays accented characters on the alphabetic keypad
Go Backward
Goes back to the main alphabetic keypad display
Alert Icon
Because the screen cannot show the status of all of the 60 keys at one time, the Alert Icon
allows you to go directly to the last feature key that was activated and that had a
flashing lamp, such as a voice mail key. If the key is already displayed on the screen, this
icon will not appear. You can press on it one time to go directly to the key, and then it
disappears.
In most cases, the last lamp that is flashing will be the voice mail key; however other
features can also be activated that use a flashing lamp and could cause this icon to appear.
EADS TELECOM North America Inc. - 2569-003
M
M
9
Chapter 1, Basic Information
Alphabetic Keypad Screen
The alphabetic keypad screen allows you to search the directories before calling a party,
initiate calls by name, enter text for messages, and write memos. It is a standard
QWERTY keypad with upper case display as the default.
The Main Alphabetic Keypad
Lower Case and Special Characters
Use the table below as a guide to accessing lower case and special characters.
Icons
And
Description
Accesses lower case characters and special characters
Displays accented characters
Enters a space
Places the cursor on the previous character where a character
can be inserted
On Navigator
Places the cursor on the next character where a character can be
inserted
On Navigator
10
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Icons
Description
Deletes the character at the left of the cursor
This icon appears only after the first character is entered
Deletes an entire entry
This icon appears only after the first entry
Confirms an entry
On screen or
Navigator
Icons and Lamps
Icon Lamps for Feature Keys
The icon lamps next to the feature keys are used to indicate the current status of the
feature on that key. The following table describes the symbols that are used in this guide
for the key icon lamps.
Lamp
Description
Off
Blink
Flash
On
Other Lamps
The following table describes the symbols that are used in this guide for the Speaker and
Mute key lamps.
Lamp
Description
OFF
Blink
EADS TELECOM North America Inc. - 2569-003
M
M
11
Chapter 1, Basic Information
Lamp
Description
Flash
ON
Message Lamp
The Message lamp is located on the right side of the phone just above the Red
.
The following table describes the symbols that are used in this guide for the Message
lamp.
Lamp
Status
Description
On
There is at least one new message in your voice mailbox
Off
There are no new messages in your mailbox
Blink
There are no new messages in your mailbox, but there is a new
call in the Incoming Calls log
Flash
There is a message in your mailbox, and a new call in the
incoming calls log
Ring Types
There are three ring types.
12
M
M
Ring Type
Description
One-ring pattern
Internal Call
Two-ring pattern
External Call
Three-ring pattern
System Call as in a Callback
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
System Tones
The following tones are heard on a PointSpan 6880 Series system.
Sound
Tone
Description
Dial Tone
You can begin dialing
Outside Dial Tone
You have dialed the access code
for an outside call (usually a 9)
Modem Tone
You can make a data call
Busy
The number that you dialed is
busy
Fast Busy
You action is not accepted by the
system
Input Prompt Tone
The system is waiting for your
input
Confirmation Tone
The system has confirmed your
action
1 Short Ring
Internal Call Waiting
Tone
You are receiving an internal call
during a phone conversation
Short Ring+Beep
External Call Waiting
Tone
You are receiving an external
call during a phone conversation
Waiting Caller Tone
You have called an extension that
is busy
Warning Tone
Another party is joining (as in a
conference)
Low-Pitched Tone
High-Pitched Tone
Medium-Pitched Tone
BuzzBuzz
BuzBuzBuzBuz
1 Beep
2 Beeps
Long Ring+Beep
Long Beep
System Voice Prompts
The following voice prompts can be heard on a PointSpan 6880 Series system.
Voice Prompt
"Park number _____"
EADS TELECOM North America Inc. - 2569-003
Description
You have parked a call. This number must
be dialed to retrieve the call
M
M
13
Chapter 1, Basic Information
Voice Prompt
Description
You have dialed a non-working number
"Extension _____ is not in service"
You have dialed incorrectly
"Invalid, Invalid"
"Depress CALLBACK to queue call"
"All lines busy, please hold"
All outgoing lines are busy. You may
queue the call and hang up.
All outgoing lines are busy. Your call is
queued automatically and you may stay on
the line.
Calculator
The Calculator feature allows you to access a calculator functions as a calculator. It is
also a EUROS converter.
Access the Calculator
Step
Action
1.
Press
Result
The calculator screen opens
Memo
The Memo feature allows you to store and display short messages at any time.
14
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Create a Memo
Step
Action
Result
1.
Press
2.
Press
Press the stylus in the area
where the first character
will go in one of the memo
spaces
3.
Enter
The text of the memo (34character maximum)
4.
Press
The alphabetic keypad displays
The memo is stored
Modify a Memo
Step
Action
1.
Press
2.
Result
Press the stylus
inside the memo
that you want to
modify
The alphabetic keypad is
opened
The cursor is on the
character where the stylus
was pressed
Press
To backspace
Press
Or
To insert
Press
To delete
3.
Press
The memo is modified
Delete a Memo
Step
Action
1.
Press
2.
Press
EADS TELECOM North America Inc. - 2569-003
Result
The memo is deleted
M
M
15
Chapter 1, Basic Information
Place a Call
Get Dial Tone
Step
Action
1.
Result
Lift the handset
Or
Extension lamp
ON
Press
SPKR lamp ON if
Speaker is used
Place an Internal Call
•
If you have more than one extension on your phone, press the extension key that you
want to use before lifting the handset or pressing the Speaker key.
•
If dial tone changes to a fast busy tone and then silence, you have waited too long
before dialing. You must hang up and try again.
Step
Action
1.
Result
Dial the extension number
The call is placed
Place an External Call
Your system administrator will provide you with dialing codes and calling limitations.
Step
Action
Result
1.
Dial the outside access
number (usually a 9)
2.
Dial the external number
The call is placed
Dial by Name from the Personal Directory
See Private Directory.
16
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Dial by Name from the System Directory
See System Name/Number Directory.
Dial with Abbreviated Dial
See Abbreviated Dial.
Dial with Auto Dial
See Auto Dial.
Dial with Redial
See Redial and Outgoing Calls Log.
Dial with the Incoming Calls Log
See Incoming Calls Log.
Answer a Call
Condition:
There is a call ringing in at your extension
Step
Action
1.
Result
Lift the handset
The call is answered
Or
Press
End a Call
Pressing the
Speaker key does not disconnect a call.
EADS TELECOM North America Inc. - 2569-003
M
M
17
Chapter 1, Basic Information
Step
Action
1.
Result
Hang up the handset
The call is disconnected
Or
Press
18
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 2
Phone Settings
Volume Settings and Ring Settings
You can make the following adjustments to your phone:
•
Key beep volume level
•
Ring melody and corresponding volume levels
•
Handset, speaker, and headset volume
Access the Setting Adjustment Screen
Condition:
The phone is idle and onhook
Step
Action
1.
Press
Result
The Setting screen opens by default
Adjust the Key Beep Volume
You hear a beep each time a key is pressed. The volume of this beep can be adjusted to 8
different levels, or it can be deactivated completely.
EADS TELECOM North America Inc. - 2569-003
M
M
19
Chapter 2, Phone Settings
Step
Action
Result
1.
Go to
2.
Press
3.
Go to
4.
Press
5.
Stop when you have reached the
desired level
6.
Press
The key beep sound is turned on or
completely off
Or
Adjusted key beep sound
Or
Setting is saved on OK
On the screen or the
Navigator
Or
Go to ring melody and volume
settings
Change Ring Melody and Adjust Ring Melody Volume
You can choose from 16 different melody types for the ring, and you can adjust the
volume of the ring up to 8 levels.
20
M
M
Step
Action
Result
1.
Go to
2.
Press
3.
Stop when you have reached the
desired ring melody
4.
Go to
5.
Press
6.
Stop when you have reached the
desired volume
The display shows the current ring
melody number
Hear a different ring
melody each time you
press a button
Or
The display shows the selected
volume level
Hear a different volume
level each time you press a
button
Or
Continue to hear the
melody played at the
desired volume
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
7.
Press
Result
On the screen or the
Navigator
The melody stops playing and
characteristics are saved
Or
Go to the handset volume setting
Adjust the Handset Volume
The handset volume can be adjusted to 8 different levels.
You can also adjust the handset volume during a call by using the
the Navigator.
Step
Action
1.
Go to
2.
Press
3.
Press
and
key of
Result
Or
The display shows the selected
volume level
The handset volume is saved
On the screen or the
Navigator
Or
Go to the speaker volume setting
EADS TELECOM North America Inc. - 2569-003
M
M
21
Chapter 2, Phone Settings
Adjust the Speaker Volume
The speaker volume can be adjusted to 8 different levels.
You can also adjust the speaker volume during a call by using the
Navigator.
Step
Action
1.
Go to
2.
Press
3.
Press
or
key of the
Result
The display shows the selected
volume level
Or
The speaker volume is saved
On the screen or the
Navigator
Or
Go to the headset volume setting
Adjust Headset Volume
The speaker volume can be adjusted to 8 different levels.
You can also adjust the headset volume during a call by using the
Navigator.
Step
Action
1.
Go to
2.
Press
3.
Press
or
key of the
Result
The display shows the selected
volume level
Or
The speaker volume is saved
On the screen or the
Navigator
Or
Press
To go the keyboard setting
on the next screen
22
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Adjust Keypad Type
The alphabetic keypad associated with the phone can be changed from to QWERTY or
AZERTY.
Step
Action
1.
Go to
2.
Press
3.
Press
Result
Or
The keyboard type is adjusted
The keyboard type is adjusted
On the screen or the
Navigator
Or
Go to the direct call setting
Direct Call
This setting allows you to choose an internal or external directory when you make a call
using the alphabetic keypad to do a name search. On the ITE-780 this setting is not
necessary as both internal and external lists default to the System directory.
Step
Action
1.
Go to
2.
Press
3.
Press
Result
Or
The list is selected
All settings are stored
On the screen or the
Navigator
Screen Adjustments
You can make these adjustments to your screen:
•
Screen standby time setting
•
Screen contrast
•
Calibrate the command pointer (stylus)
•
Clean the screen
EADS TELECOM North America Inc. - 2569-003
M
M
23
Chapter 2, Phone Settings
Screen Adjustment Screen
Access the Screen Adjustment Feature
Condition:
The phone is on hook and is idle.
Step
Action
1.
Press
2.
Press
Result
The screen setting screen is
displayed
Change the Screen Standby Time Setting
You can choose the length of time before the screen goes into standby mode. The
settings are in 15-minute increments, up to one hour.
24
M
M
Step
Action
1.
Go to
2.
Press
Result
Or
The display shows the selected
setting
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
3.
Press
Result
The standby delay is saved
On the screen or the
Navigator
Or
Go to the next setting
Adjust the Screen Contrast
You can choose one of 16 contrast levels.
When the phone is idle, you can also use the
the screen contrast.
Step
Action
1.
Go to
2.
Press
3.
Press
or
keys on the Navigator to change
Result
Or
On the screen or the
Navigator
The display will reflect the contrast
level
The display will reflect the contrast
level
Or
Go to the next setting
Calibrate the Screen
For optimal use of the touch screen, you should calibrate the screen.
Step
Action
1.
Press
The screen displays a cross in the
top left corner and prompts you to
proceed with calibration
2.
Press on the center of the cross
with the command pointer
The screen will display a cross in
the bottom right corner
3.
Press on the center of the cross
again with the command pointer
The screen calibration is complete
EADS TELECOM North America Inc. - 2569-003
Result
M
M
25
Chapter 2, Phone Settings
Clean the Touch Screen
Before you start to clean the screen, you must deactivate the screen.
Step
Action
Result
1.
Press
2.
Use a cloth dampened with slightly
soapy water, then wipe with a dry
cloth.
The display confirms the
deactivation of the touch screen
To keep the screen in good
condition, do NOT use solvents or
cleaning products.
3.
Press
The cleaning is ended
On the Navigator
You are returned to the main
display screen
Listening Volume
You can adjust the listening volume for the handset, speaker, and headset to one of 8
different volume levels while you are on a call. See also Volume Settings and Ring
Settings.
In Headset mode, the volume is returned to mid-level for the next call.
26
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Condition:
You are on a call.
Step
Action
1.
Press
Result
Or
The conversation volume
is increased or decreased
accordingly
The last volume setting is
stored by the phone
Feature Keys
The ITE-780 provides 60 feature keys that are assigned to features and numbers chosen
for you by the system administrator. Your phone should come to you with the keys
already labeled. If they are not, contact your system administrator for a list of keys and
follow the procedure below for each key.
Label the Keys
Step
Action
1.
Press
Result
The display prompts you to press a
key
2.
The alphabetic keypad screen
opens
3.
4.
Enter the label text
Press
EADS TELECOM North America Inc. - 2569-003
M
M
27
Chapter 2, Phone Settings
28
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 3
Modes of Operation
Speaker
The Speaker key allows you to converse using the Speaker. Others can also participate in
the conversation.
Activate the Speaker
Condition:
You are on a call and are using the handset
Step
Action
1.
Press
2.
Result
The Speaker lamp is flashing
for 6 seconds
Hang up the handset within
6 seconds
The Speaker lamp goes on
steady
The conversation is heard through
the Speaker
• If you do not hang up the
handset while the lamp is blinking,
the call will continue in the handset
mode and the Speaker lamp will be
on steady
• If you hang up while the
Speaker lamp is on steady, the call
will disconnect
Deactivate the Speaker
Condition:
The conversation is through the Speaker.
EADS TELECOM North America Inc. - 2569-003
M
M
29
Chapter 3, Modes of Operation
Step
Action
1.
Result
Lift the handset
The Speaker lamp is off
You are now conversing using the
handset
Mute
The Mute key allows you to listen to a phone conversation while preventing others on the
call from hearing you and can be used with the speaker, the handset, or a headset.
The Mute key can also be used to monitor the line when you are put on hold.
Activate and Deactivate the Mute Feature
Condition:
You are on a call
Step
Action
1.
Press
Result
The Mute lamp is on
Your voice will not be picked up
by the microphone
2.
Press
The Mute lamp is off
You are able to verbally participate
in the call
Hands Free Auto-Answer
The Hands Free Auto-Answer (HFA) feature automatically connects to incoming calls
without any intervention from the user and turns off automatically when the caller hangs
up. This feature can be used with a headset.
Additional Information:
30
M
M
•
Only an extension or intercom line can be used with HFA.
•
A fast busy tone indicates that the HFA feature cannot be activated. See your system
administrator.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
When the HFA feature is activated, the phone should not be left unattended without first
deactivating HFA. This prevents a call from being answered while there is no one at the
phone to talk to the caller.
Activate Hands Free Auto-Answer
Condition:
The phone is onhook
Step
Action
1.
Press
Result
2-Beep confirmation tone
HFA lamp
ON
Speaker lamp ON
The feature is activated
2.
Press
Silence
Speaker Lamp OFF
You are ready for the next call
Deactivate Hands Free Auto-Answer
Step
Action
1.
Press
Result
HFA lamp
OFF
Speaker lamp OFF
The feature is deactivated
EADS TELECOM North America Inc. - 2569-003
M
M
31
Chapter 3, Modes of Operation
Answer a Call with Hands Free Auto-Answer Activated
Conditions:
The handset remains onhook
HFA is already activated
Step
Action
1.
Result
Ring and/or warning tone
in headset
The call is automatically answered
HFA lamp
flashing
when calling
party is on
the line
Speaker lamp ON
2.
Talk to the calling party
End a Call with Hands Free Auto-Answer Activated
Step
32
M
M
Action
1.
The caller hangs up
2.
Press
Result
HFA lamp
OFF
The call is terminated
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 4
Features
Abbreviated Dial
The Abbreviated Dial feature allows you to store frequently called internal and external
numbers of up to 28 digits, and dial them automatically by using a one or two digit code.
All extensions are automatically allowed a list of 10 abbreviated dial numbers or
optionally allowed a list of 100 Abbreviated Dial numbers. The following procedures
assume that you have 10-number Abbreviated Dial.
Abbreviated Dial Methods
There are two ways to access the Abbreviated Dial feature.
Key
Description
The Directory and the Abbreviated Dial
softkey
+
The Abbreviated Dial feature key
•
If you have more than one line on your phone, you must store the abbreviated dial
number on each line from which it will be accessed.
•
Stored numbers must contain the complete phone number including any access
number that is used to connect to an outside line (usually a 9). When you dial the
access number, you will hear outside dial tone before you input the number.
•
The star symbol (*) can be inserted into long distance numbers as a dial pause
symbol. A dial pause is the time spent waiting for dial tone or a computer tone. The
pause time is stored by using the (*) symbol, which is a system setting and may be
set for one to seven seconds. Each star (*) counts as one digit of the total 28 digits.
•
A stored number cannot be erased, but you can remove or change a number by
storing a new number over it.
Program an Abbreviated Dial Number
Condition:
The phone is on hook
EADS TELECOM North America Inc. - 2569-003
M
M
33
Chapter 4,Features
Step
Action
1.
Press
Result
The display alternates between:
and
2.
Press
If you have more than one extension
on your phone, the display
alternates between:
and
3.
Press
4.
5.
Dial the Abbreviated Dial
reference number (0-9)
Press
6.
7.
Dial the Abbreviated Dial
number including all access
codes
Press
The Abbreviated Dial number is
saved
Or
8.
Press
Exits the programming function
Or
Press
+
34
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Other Softkeys Used with Abbreviated Dial
Key
Description
Cancels the current input and allows you to keep the prior setting
Erases the last digit displayed and repositions the cursor
Erases all digits and allows you to reenter the number
Exits the programming function
Modify an Abbreviated Dial Number
Use the same procedure above to modify Abbreviated Dial numbers.
Use the Directory Key to dial an Abbreviated Dial Number
Step
1.
Action
Result
If you have more than one line:
Press
+
If you have only one line:
Press
2.
3.
Only
Press
Extension
lamp ON
Dial the abbreviated dial
reference number (0-9)
EADS TELECOM North America Inc. - 2569-003
The number is automatically dialed
M
M
35
Chapter 4,Features
Use the Abbreviated Dial Feature Key
Step
1.
Action
Result
If you have more than one line:
Press
Before using the Abbrev
Dial key
If you have only one line:
Go directly to Step 2
2.
Press
3.
Extension
lamp ON
Dial the abbreviated dial
reference number (0-9)
Abbreviated
Dial lamp
remains
OFF
The number is automatically dialed
Display Abbreviated Dial Numbers
The Display feature key is used to display your Abbreviated Dial numbers.
Step
1.
Action
Result
If you have more than one line:
Press
If you have only one line:
Go directly to Step 2
36
M
M
2.
Press
3.
Press
Display lamp
ON
The first Abbreviated Dial number
is displayed:
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
4.
Press
Result
Repeatedly
5.
The Abbreviated Dial numbers are
displayed sequentially:
Press
Display lamp
OFF
Exits the Display function
If you do not exit the Display
function, it will time out after 5
seconds
Answer/Release
The Answer/Release feature allows you to answer a call or get dial tone by pressing a
feature key. This key can also be used with a headset.
•
When using a headset with Auto Answer activated, use the ANSW/RLSE key to get
dial tone for placing a call, or to hang up.
•
After using the ANSW/RLSE key, make sure the lamp is OFF. If it is not, press the
ANSW/RLSE key twice to answer the next call.
Use the Answer Release Key
Step
Action
1.
Press
Result
Or calling party
To go off hook
2.
Press
To hang up
EADS TELECOM North America Inc. - 2569-003
Answer/
Release and
Extension
lamps ON
Answer/Rele
ase and
Extension
lamps OFF
M
M
37
Chapter 4,Features
Auto Dial
The Auto Dial feature allows you to store one number of up to 28 digits for each Auto
Dial feature key on your phone and dial the number by using that feature key.
•
One feature key is required for each Auto Dial number.
•
Stored numbers must contain the complete phone number including any access
number that is used to connect to an outside line (usually a 9). When you dial the
access number, you will hear outside dial tone before you input the number.
•
A dial pause symbol, the star (*) can be inserted into long distance numbers. A dial
pause is the time spent waiting for dial tone or a computer tone. The pause time is
stored by using the (*) symbol, which is a system setting and may be set for one to
seven seconds. Each star (*) counts as one digit of the total 28 digits.
•
A stored number cannot be erased, but you can remove or change a number by
storing a new phone number over it.
Program an Auto Dial Key
Conditions:
The phone is on hook
Step
Action
1.
Press
Result
The display alternates between:
and
2.
Press
The display alternates between:
and
3.
4.
38
M
M
Press
Dial the number including
any access codes that are
required to make the call
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
Result
5.
Press
The number is saved
6.
Press
Exits the Auto Dial function
Or
Press
+
Other Softkeys Used with Auto Dial
Key
Description
Cancels the current input and allows you to keep the prior
setting
Erases the last digit displayed and repositions the cursor
Erases all digits and allows you to reenter the number
Exits the programming function
Modify an Auto Dial Number
Use the procedure above to modify an auto dial key.
Use an Auto Dial Number
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
The number is automatically dialed
Of the number that you
want to dial
EADS TELECOM North America Inc. - 2569-003
M
M
39
Chapter 4,Features
Display an Auto Dial Number
The Display feature key is used to display your Auto Dial numbers.
Step
Action
1.
Press
2.
Press
Result
Display
lamp ON
The Auto Dial number is
displayed:
You can press each Auto Dial key
before exiting the Display function
3.
Press
Display
lamp OFF
Exits the Display function
If you do not exit the Display
function, it will time out after 5
seconds
Busy Override
The Busy Override feature allows you to interrupt a busy extension and break into the
call. It is intended for high priority and emergency situations.
40
M
M
•
The overriding party must have a higher priority assigned to the phone than both
parties being overridden.
•
A phone set on Do Not Disturb that gives the caller a busy signal, can be overridden
by a Busy Override call, providing that Busy Override feature is allowed and the
phone has a lower priority than the overriding party.
•
The overriding party hears a constant steady dial tone for 15 seconds or until the
extension called is no longer busy, whichever occurs first.
•
The party that is being interrupted hears a one second warning tone. The tone
indicates that the call will be overridden in 15 seconds if it is not put on hold or
ended. Immediately before the overriding party is on line, another warning entry
tone is heard. If the call is not put on hold, or ended, the other party in the
conversation is disconnected and the call is overridden.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
•
When your conversation is being overridden and you place the other party on hold or
hang up, the overriding party is either on your line immediately or ringing on your
line depending on the database for your phone.
Override a Busy Extension
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Dial the number of the
extension
Busy tone or call waiting
tone
If you are not allowed to override
the extension, you will continue to
hear a busy tone or Call Waiting
tone
3.
Press
Until the called party
hangs up or until the 15second time limit is
reached
Busy
Override
lamp ON
4.
Wait on the line
Talk with the called party
Buzz/Status
The optional Buzz/Status feature allows a voice connection on a Buzz/Status line
between one Buzz user and one or more Status users by pressing either a Buzz or Status
feature key.
Example:
An executive with a Buzz key on the phone can have a direct line to an assistant or group
of assistants, each having a Status key on their phone. Each assistant can place a call
directly to the executive by using the Status key.
EADS TELECOM North America Inc. - 2569-003
M
M
41
Chapter 4,Features
•
An option to the Buzz/Status talking connection is the Buzz/Status-Alert Only option.
•
In a group of Status users, the first person to answer stops the ringing and blocks all
others in the group from picking up the call.
•
Buzz/Status calls do not affect a call in progress.
•
The lamp next to the Status key is on when the Buzz counterpart is using the phone.
The lamp next to the Buzz key does not indicate when the Status counterpart is using
the phone.
•
Features such as Hold or Transfer cannot be used on the Buzz/Status line.
•
Buzz/Status calls can ring on a phone that has activated Do Not Disturb.
Place a Buzz Call to a Status User
Press the Buzz or Status key before lifting the handset or pressing the
Step
Action
1.
Press
2.
key.
Result
Buzz lamp
OFF
Lift the handset
The call is placed to the Status party
Or
Press
Answer a Buzz Call from a Status User
Conditions:
The Buzz lamp is blinking
The Buzz line rings
42
M
M
Step
Action
1.
Press
Result
Buzz lamp
ON
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
2.
Result
Lift the handset
You are connected to the Status
party
Or
Press
Place a Status Call to a Buzz User
Step
Action
1.
Press
2.
Result
Status lamp
ON
Lift the handset
The call is placed to the Buzz party
Or
Press
Answer a Call from a Buzz User
Conditions:
The Status lamp is blinking
The Status line is ringing
Step
Action
1.
Press
2.
Result
Status lamp
ON
Lift the handset
You are connected to the Buzz
party
Or
Press
Callback
The Callback feature allows you to place a Callback on a busy internal extension or an
extension that does not answer. The system automatically places the call when both
extensions are no longer busy.
EADS TELECOM North America Inc. - 2569-003
M
M
43
Chapter 4,Features
•
When another party has left a callback on your phone, the
displayed in the menu.
•
If a callback is left on a line other than your prime line, it will display only after you
select the line.
•
Each extension can have 10 callbacks.
•
Callbacks are returned on a first in/first out basis.
•
If you try to leave a callback on an extension that has already received 10 callbacks,
you will hear a fast busy tone.
•
If there is no answer when you return a callback, you may either hang up and cancel
the call or leave a callback on that extension.
•
A callback that you place on another extension returns to your phone with a threering system ring when both your phone and the called extension are on hook. That
call is automatically canceled if you do not answer within a system-defined time
period.
•
A callback is left on the number that you originally dialed, even if it has been
forwarded.
•
When you return a callback to a number that has been forwarded, the call goes to the
forwarded number.
•
The party that places the callback cannot cancel the callback.
softkey is
Place a Callback on a Busy Extension
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Dial the extension number
Busy tone or call waiting
tone
Example display:
3.
Press
2-beep confirmation tone
The callback is placed
44
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
4.
Result
Hang up
Or
Press
Answer a Returned Callback
Conditions:
The Extension and Callback lamps are flashing indicating that a
callback is being returned.
The three-ring system ring.
Step
Action
1.
Result
Lift the handset
You have answered the returned
callback
Or
Press
Return a Callback
It is not necessary to return a callback before using your phone.
Conditions:
The lamp is flashing on the extension where the callback has
been placed
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
EADS TELECOM North America Inc. - 2569-003
The phone rings at the extension
that placed the call
M
M
45
Chapter 4,Features
Display a Callback
Step
Action
1.
Press
Result
Repeatedly if there is more
than one
If the date and time stamp is set up
on your system, you will see the
information displayed after the
name and number
2.
Press
Repeatedly to find the
Callback to cancel
Display and Cancel a Callback
Step
Action
1.
Press
2.
Press
Result
Repeatedly to find the
Callback to cancel
3.
46
M
M
Press
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Call Forward
The Call Forward feature allows you to temporarily redirect your incoming calls to
another number.
•
Each extension on the phone must be forwarded separately.
•
If you have more than one extension, press the Extension key first.
Program Call Forward
Assign a call forward number to an extension to be used with the Call Forward feature
key.
Step
Action
1.
Press
Result
The display alternates between:
and
2.
Press
If you have more than one
extension, the display alternates
between:
and
3.
Press
If number is not assigned:
Or
If number is assigned:
EADS TELECOM North America Inc. - 2569-003
M
M
47
Chapter 4,Features
Step
4.
Action
Result
Option:
If number is already assigned and
you want to change it:
Press
5.
6.
Dial the call forward
destination number
Press
Call Forward
lamp ON
All calls will be forwarded to the
new number
Or
Press
7.
Press
Exits the Programming function
Or
Press
+
Turn Off Call Forward using Softkeys
Conditions:
The line that you select is already forwarded:
48
M
M
Step
Action
1.
Press
2.
Press
3.
Press
4.
Press
Result
+
Call Forward
Lamp OFF
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
5.
Press
Result
Exits the Programming
function
Or
Press
+
Other Softkeys Used with Call Forward
Key
Description
Cancels the current input and allows you to keep the prior
setting
Erases the last digit displayed and repositions the cursor
Erases all digits and allows you to reenter the number
Exits the programming function
Set up Call Forward with the Feature Key
Step
1.
Action
Result
If you have more than one line:
Press
2.
3.
Press
2 Beeps
Dial the Call Forward
destination number
Call Forward
lamp ON
2-Beep confirmation tone
EADS TELECOM North America Inc. - 2569-003
M
M
49
Chapter 4,Features
Turn Off Call Forward with the Feature Key
Step
Action
1.
Result
If you have more than one line:
Press
2.
Press
Call Forward
lamp OFF
2-beep confirmation tone
Call Forward is canceled
Call Mark
The optional Call Mark feature marks a bad phone connection on an outside line. When
you hear static, echo, low volume, etc. on an outside (external) call, you can use the Call
Mark feature key to mark the call. This provides troubleshooting information to
technicians.
Mark a Call
Condition:
You are connected to an outside call that has problems with static, echo, low
volume, etc. and this problem needs to be reported
Step
Action
1.
Press
Result
The call is marked and a
notification is automatically sent to
the system administration screen
You can continue the conversation
2.
Continue to talk
Call Park
The Call Park feature allows you to temporarily place a call on hold for a pre-set time
limit. The call can be retrieved on any phone in the system. If the call if not retrieved
within the time limit, the call automatically reverts back to the extension that parked the
call.
50
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Park a Call
Condition:
You are already on a call that needs to be parked
Step
Action
1.
Press
Result
Call Park number and then
silence
The call is parked and you can place
and receive calls
You can also use the ACCESS key
and the feature code * 9
To hear the number repeated,
immediately press the Call Park
button again.
2.
Hang up
Or
Press
3.
Write down the Call Park
number
Pick Up a Parked Call from Any Phone in the System
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Dial the Call Park number
No ringing is heard
The call is connected immediately
EADS TELECOM North America Inc. - 2569-003
M
M
51
Chapter 4,Features
Call Pickup
The Call Pickup feature allows you to answer another ringing line at your phone. There
are two types of Call Pickup:
•
Group Call Pickup - Your extension is assigned to a Call Pickup group. You can
answer a call directed to any member of your Call Pickup Group.
•
Extension Call Pickup - You can answer a call directed to another phone by pressing
the Call Pickup feature key and dialing the extension number of the ringing phone.
•
See your system administrator for information regarding members of your Call
Pickup Group.
•
When two phones are ringing at the same time, the phone that was ringing first is
picked up. That call can be put on hold while the second call is picked up.
•
If you hear a fast busy tone after trying to pick up a call, either you are not assigned
to that group or another group member picked up the call.
Pick up a Call as Member of a Call Pickup Group
Condition:
A call is ringing in for a member of the Call Pickup Group
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
The caller is connected on your
extension
Pick up a Call by Dialing the Extension Number
Condition:
A call is ringing in for a member of the Call Pickup Group
52
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
3.
2-beep confirmation tone
Dial the extension number
of the ringing phone
The caller is connected on your
line
Call Waiting
The Call Waiting tones heard while you are on a call are:
Call Waiting Tone
Description
One Short Ring
Internal Call
Long Ring-Beep
External Call
•
If you choose not to answer the call waiting, the caller either continues to hear
ringing or could be automatically forwarded to another extension, voice mail, or the
operator, depending on the system design.
•
An extension can have only one call waiting at a time. If another party calls, they
will hear busy tone or ringing if the call is programmed to ring on another extension.
•
The Call Waiting tone is heard one time only and only on the extension that is called.
However, if you receive more than one call during a phone conversation, you will
hear a call waiting tone for each call.
•
Internal callers dialing a busy extension hear a ring-beep tone that indicates the line is
busy and they are in the call waiting state.
•
An external caller that is Call Waiting may hear a regular ringing tone in place of the
ring-beep.
•
Depending on the system design, you are call waiting on a busy extension:
•
Until the party you are calling answers
•
Until a pre-set time period expires and the system forwards your call to
another extension
•
Until you decide to hang up
EADS TELECOM North America Inc. - 2569-003
M
M
53
Chapter 4,Features
Accept a Call Waiting
Conditions:
You are already on a call
Call Waiting tone
Extension key icon lamp flashing indicating an incoming
call
Step
Action
1.
Press
Result
Or
The first party is placed on hold
Press
2.
Hang up
Or
Press
3.
Lift the handset
Extension
key icon
lamp is
flashing
Or
Press
Caller 1 is on hold
You are connected to Caller 2
54
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Alternate Between Calls
Conditions:
Caller 1 is on hold
You are in conversation with Caller 2
Step
Action
Result
1.
Press
Caller 2 is placed on hold
Or
You are in conversation with
Caller 1
Press
Extension
key icon
lamp is
flashing
Caller 2 is on hold
2.
Repeat Step 1 to alternate between
calls
Return to the Holding Party when One Party Hangs Up
Conditions:
One party is disconnected, the other is still on hold
Step
Action
1.
Press
Or
Press
Result
Extension
lamp ON
You are in conversation with the
held party
Cancel
The Cancel feature allows you to abort any dialing sequence by pressing a feature key.
You can cancel callbacks and unanswered transfers or conference calls.
EADS TELECOM North America Inc. - 2569-003
M
M
55
Chapter 4,Features
Use Cancel
Step
Action
1.
Press
Result
The dialing sequence has been
canceled and you may start dialing
again
Conference
The Conference key allows up to seven parties to be joined in a conference call.
•
One system user must support a conference. A user can be a participant in the
conference or can be a non-participant, by setting up the conference and placing the
group on Conference Hold.
•
A member may leave a conference at any time by hanging up. If there are only 2
parties left, then the conference is dropped, and the call becomes a normal two-way
call.
•
The conference warning tone (a system option) alerts members in the conference that
another party is being added.
•
If you are accidentally disconnected from a conference, you may be reconnected only
by an internal member of the conference calling you or as a call waiting party on an
internal conference member's phone.
•
The Conference feature key or the CnfHold
softkey can be used to place a
conference on hold. For example, when accepting a Call Waiting. The Hold key
does not put a conference on hold.
•
When a conference is on Conference Hold, or when additional parties are being
added to the conference, the remaining parties can continue talking.
Conference up to Seven Parties
Condition:
Begin with one party already on the line
Or
56
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
1.
Press
Result
Conference lamp is flashing
Or
Press
2.
Dial the number of a party
to add to the conference
3.
Wait for the party to answer and
announce the conference
4.
Press
The conference is
established
Conference
lamp ON
Or
Press
Long beep is played to
those already in the
conference to indicate that
another party has entered
5.
Press
6.
Repeat steps 3 - 5 until all parties
are joined into the conference
Leave the Conference and Return
You can put the conference on hold to allow you to add another party, or make another
call.
Step
Action
1.
Press
Result
Leave the conference
2.
Press
EADS TELECOM North America Inc. - 2569-003
Return to the conference
M
M
57
Chapter 4,Features
Leave the Conference Permanently
Step
Action
1.
Result
Hang up when the display
reads "In Conference"
Data Calls
The Data feature allows you to place and receive data calls and, at the same time, use the
phone to place and receive voice calls or use other features. You can use the following
features with data numbers:
Abbreviated Dial – See Abbreviated Dial
Auto Dial – See Auto Dial
Last Number Redial – See Last Number Redial
Callback Queuing – See for External Lines
Online Queuing - See Queue for External Lines
Use Data Features
To use the Data features you must have a Data feature key, a PDI-1000 type data
interface, and a data destination to dial.
Condition:
The data number has been successfully dialed by one of the above
features and you hear ringing.
Step
Action
1.
The data number is dialed
2.
Wait for modem tone
3.
Press
Result
The Data
lamp is
flashing
Data lamp
ON
Dial tone or silence
The data connection is made
58
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
4.
Result
Hang up
Or
Press
The data connection stays up
You can place and receive voice
calls
Do Not Disturb
The Do Not Disturb feature allows you to temporarily block incoming calls without
affecting the use of your phone. The Do Not Disturb feature applies only to the phone
where the feature has been activated. It does not affect other phones where this extension
may appear.
Activate Do Not Disturb
Step
Action
1.
Press
Result
Do Not
Disturb lamp
ON
You can also use the feature
code * 6
Deactivate Do Not Disturb
Step
Action
1.
Press
Result
Do Not
Disturb lamp
OFF
You can also use the feature
code # 6
Event Timer Display
The Event Timer feature allows you to use your phone display as a stopwatch. The
minutes and seconds of the timer replace the normal display.
EADS TELECOM North America Inc. - 2569-003
M
M
59
Chapter 4,Features
Use the Event Timer
Step
Action
1.
Press
Result
Event Timer
lamp ON
The timer starts
2.
Press
Event Timer
lamp OFF
The timer stops
Group Listen
The Group Listen feature allows any person in a conference to add up to ten parties, in a
listen only mode, to a conference.
•
A conference with group listeners can total 16 parties consisting of six full
Conference members and 10 Group Listen members.
•
A listen-only party, unlike a regular conference member, cannot place the conference
on Conference Hold to accept a call waiting.
•
When listener that has been added to a conference leaves a conference by hanging up,
they cannot return to that conference on their own.
Add Group Listen Parties to a Conference
Conditions:
You are already on a call
Or
60
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
1.
Press
Result
Extension
lamp ON
Conference
lamp is
flashing
The call is on hold
2.
Dial the phone number of a
Group Listen party
3.
Announce the conference and the
Group Listen feature
4.
Press
You are connected to the Group
Listen party
Conference
lamp ON
The Group Listen party is added to
the conference in listen-only mode
5.
Repeat Steps 1-4 until all
parties are joined in the
conference
Rejoin the Conference
Rejoin when a dialed number for Group Listen (internal or external) is busy or
unanswered
Step
Action
1.
Press
Result
Conference entry
warning tone
(long beep)
You have rejoined the
conference
EADS TELECOM North America Inc. - 2569-003
M
M
61
Chapter 4,Features
Hold
There are three ways to put a party on hold.
Key
Description
The "R" Key
The Hold softkey
The optional Hold feature key
•
When another party puts you on hold within the same system, you can place that
party on hold at the same time.
•
The party on hold hears silence or music, depending on the system options.
Place a Call on Hold
Conditions:
You are already on a call
Or
Step
Action
1.
Press
Result
Or
Press
Or
Press
62
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Retrieve a Party on Hold
Condition:
Caller 1 is on hold
Step
Action
1.
Press
Result
Extension
lamp ON
You are reconnected to the
held party
Or
Press
Or
Press
Place a Call when a Party is On Hold and Alternate Between Calls
Condition:
Caller 1 is on hold
Step
1.
Action
Result
From dial tone:
Dial Caller 2 and wait for
Caller 2 to answer
2.
Press
You are connected to Caller 2
Caller 2 is placed on hold
Toggle between Held Calls
The display shows which party is on hold.
Step
Action
1.
Press
EADS TELECOM North America Inc. - 2569-003
Result
Toggle between held calls
M
M
63
Chapter 4,Features
Hotline Conference
The Hotline Conference feature connects up to twelve parties in a conference call. Each
conference member's phone automatically rings when call originator dials the Hotline
Conference number.
•
A Hotline Conference can be originated by a conference member only, whose phone
is programmed to allow the dialing of the Hotline Conference number.
•
A busy tone means that a conference cannot be set up at this time.
•
A fast busy tone means that all members did not answer, and the conference is
cancelled.
Initiate a Hotline Conference Call
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Dial the Hotline
Conference Number
3.
Wait on the line until one
conference member answers
Accept a Hotline Conference Call
If you place a party on hold to accept a Call Waiting that is a Hotline Conference call,
you cannot return to the party on hold unless you hang up on the conference.
Condition:
Hotline is ringing
64
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
1.
Result
Lift the handset
You are connected to the Hotline
Conference
Or
Press
Hotline
The Hotline feature allows you to press a key that automatically dials a specific number.
Use Hotline
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
Hotline
lamp ON
The call is placed
Intercom
The Intercom feature allows you to place and answer calls from members of your
Intercom Group while leaving your main extension free to receive calls.
•
Each member of an Intercom Group is assigned a one-digit number for a 10-member
group, or a two-digit number for a 100-member group.
•
An Intercom call is indicated by a flashing Intercom lamp and one-ring normal ring
or three-ring system ring.
•
Intercom calls can be allowed to ring on a phone that has activated the Do Not
Disturb feature.
•
A call on an Intercom line cannot be transferred, put on hold, or used with any other
feature. This is a system option.
•
The Hands-Free Auto Answer (HFA) feature can be used on the Intercom line.
When activated, an Intercom call is automatically answered on the speakerphone or
headset. If the user is already talking on the phone when the Intercom call is
received, then HFA does not answer that call and it must be answered manually.
EADS TELECOM North America Inc. - 2569-003
M
M
65
Chapter 4,Features
Place an Intercom Call
Step
Action
1.
Press
2.
Result
Silence
Lift the handset
Intercom
lamp ON
Or
Press
On Intercom line
3.
Dial the Intercom number
(1 or 2 digits)
The Intercom call is placed
Answer an Intercom Call
Conditions:
The Intercom line is ringing
Step
Action
1.
Press
2.
Result
Lift the handset
Or
Intercom
lamp ON
The Intercom caller is on the line
Press
Meet-Me Conference
The Meet-Me Conference feature allows up to twelve parties to dial a designated number
at a scheduled time for a conference call. No Conference key is required.
66
M
M
•
The Meet-Me conference can be reserved as one-time only or as a permanently
scheduled call.
•
Outside callers can be transferred into the Meet-Me Conference.
•
You can leave a Meet-Me Conference at any time, and rejoin the conference at any
time by dialing the Meet-Me Conference number.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Enter a Meet-Me Conference
•
When dialing in to a Meet-Me conference, the first caller hears ringing until a second
caller dials the number.
•
A long beep is heard each time a caller enters the conference if the warning tone
option is turned on in the system.
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Dial the Meet-Me
Conference number
Long beep
You are connected to the
conference
Leave a Meet-Me Conference
Step
Action
1.
Result
Hang up
Or
You are disconnected from the
conference
Press
Lock and Unlock a Meet-Me Conference
•
The Hold softkey does not put the conference on hold.
•
A Meet-Me Conference can be locked or unlocked by one member pressing the Hold
key.
EADS TELECOM North America Inc. - 2569-003
M
M
67
Chapter 4,Features
Step
Action
Result
1.
The conference is locked
Or
Press
2.
The conference is unlocked
Or
Press
Accept a Call Waiting During a Meet-Me Conference
Conditions:
You are connected to a Meet-Me Conference and a Call Waiting tone is heard
Call Waiting tone one time only, 1 short ring for an internal call or 2 short
rings for an external call
Step
Action
1.
Result
Hang up
Or
Press
2.
Wait for the phone to ring
3.
Lift the handset
The Call Waiting party is on the line
Meet-Me conference
number
You are reconnected to the
conference
Or
Press
4.
Transfer an Outside Call to a Meet-Me Conference
Step
1.
68
M
M
Action
Result
Ask the party to wait
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
2.
Press
3.
Result
The party is on hold
Dial the Meet-Me
Conference number
4.
Announce the transfer to
conference members
5.
Hang up
Or
You are connected to the conference
The transferred party is in the
conference only after you hang up
Press
Privacy Release
All calls are private even if an extension appears on more than one phone. When a
shared extension is in use, another user attempting to use the same line will hear silence.
The Privacy Release feature allows up to seven users sharing the same extension to
temporarily join conversation on that extension.
Use Privacy Release
Condition:
You are already on a call
Step
Action
1.
Press
After all notified parties have
joined the phone conversation,
pressing the PRIVCY RLSE key
blocks others from joining
EADS TELECOM North America Inc. - 2569-003
Result
Privacy
Release lamp
ON
You can talk with the original party
and others entering on your
extension
M
M
69
Chapter 4,Features
Cancel Privacy Release
Condition:
You are already on a call with privacy release activated
Step
Action
1.
Press
Result
Continue to talk
No one else can enter the
conversation
Queue for External Lines
There are two ways to queue for external lines.
Type
Description
Callback Queuing
The Callback Queuing feature places a callback on a group of busy
outgoing lines to queue the call. The system calls back when an
outgoing line is available.
Online Queuing
The Online Queuing feature allows you to wait on the line until an
outgoing line is no longer busy or until the queuing time limit
expires.
Use Callback Queuing
A queued call may return to your phone several times. A system setting controls the
maximum number of times to call back and the queuing time limit. When either the
callback limit is reached, or the queue time limit has expired and all outside lines are still
busy, the call is canceled from the queue by the system. The Callback key is used for this
feature.
Step
Action
1.
Result
Lift the handset
Or
Press
2.
70
M
M
Dial the external number
Voice prompt "Depress
CALLBACK to queue call"
if all of the outgoing trunks
are busy
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
3.
Press
Result
Voice prompt "Callback
number XX"
Feature Key
You can also use the ACCESS key
plus the feature code * 7
4.
The call is queued for the outside
line
One extension can have five calls in
queue for an outside at one time
Hang up
Or
Press
5.
Write down the callback
number and the external
number that you dialed
Receive an Automatic Callback
Conditions:
An outgoing line has become available
The system calls back
The Extension lamp is flashing
Step
Action
1.
Result
Lift the handset
Voice prompt "Callback
Number XX is ready"
Or
Press
2.
Wait on the line
The call is automatically placed
Cancel the Callback
Condition:
You are offhook listening to the call automatically being
placed and you want to cancel the call
EADS TELECOM North America Inc. - 2569-003
M
M
71
Chapter 4,Features
Step
Action
1.
Result
Hang up
The callback is cancelled
Or
Press
Use Online Queuing
Step
Action
1.
Result
Lift the handset
Or
Press
2.
3.
Dial the external number
Voice prompt "All lines
busy, please hold"
The call is placed or the queue time
will expire
Wait on the line
Or
The queue time expires
Redial
The Redial feature allows you to automatically place a call to the last outside number that
you dialed. See Outgoing Calls Log.
Use the Redial Softkey
Step
Action
1.
Press
Result
The last outside number dialed is
automatically redialed
Use the Green Key and the Outgoing Calls Log
72
M
M
Step
Action
1.
Press
Result
The last outside number dialed is
displayed
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
2.
Press
Result
The last outside number dialed is
automatically redialed
The call is placed after a 5-second
delay
Use the Last Number Redial Feature Key
Step
Action
1.
Result
Lift the handset
Or
Press
2.
Press
The last outside number dialed is
automatically redialed
You can also use the feature code # 9
Display the Redial Number
Step
Action
1.
Press
2.
Press
Result
Display lamp
ON
Or
Press
3.
Press
Display
lamp OFF
Or
Display will time out after 5
seconds
EADS TELECOM North America Inc. - 2569-003
M
M
73
Chapter 4,Features
Display using the Outgoing Calls Log
Step
Action
Result
1.
Press
The first part of the record:
2.
Press
The second part of the record:
3.
Press
To return to first part of the
record
4.
Press
Or
records
to view other
Transfer
The Transfer feature allows you to transfer both internal and external calls using a feature
key.
Initiate an Announced Transfer
Condition:
You are on an active call
Step
Action
1.
Press
2.
3.
74
M
M
Result
Dial the destination
number
Destination party answers
Announce that the call is being
transferred to the destination party
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
4.
Result
Hang up
Or
The call is connected to the
destination party
Press
Initiate an Unannounced Transfer
Condition:
You are on an active call
Step
Action
1.
Press
Result
2.
Dial the destination
number
3.
Hang up
Or
The call is transferred to the
destination party without
announcement
Press
Or
Press
Return to the Transferred Party
Conditions:
You have transferred the call and the destination is ringing
Step
Action
1.
Press
Result
You are reconnected to the
transferred party
Return to Transferred Party after Connection to Voice Mail
EADS TELECOM North America Inc. - 2569-003
M
M
75
Chapter 4,Features
Condition:
You are listening to the voice mail of the transfer destination party
Step
Action
1.
Press
Result
You are reconnected to the
transferred party
Voice Mail
The Voice Mail feature allows you to access the voice mail system to send and receive
messages. Voice Mail can be accessed using any internal or external phone.
Message Lamp Status
Lamp
Status
Description
On
There is at least one new message in your voice mailbox
Off
There are no new messages in your mailbox
Blink
There are no new messages in your mailbox, but there is a new
call in the Incoming Calls log
Flash
There is a message in your mailbox, and a new call in the
incoming calls log
Access Voice Mail
This procedure assumes that the
"R" key on your phone has been programmed to
automatically dial the voice mail system. The phone must be onhook to use this key to
access voice mail. If you press the
hold.
key while on a call, you will place the call on
Conditions:
The Voice Mail feature key lamp is flashing
76
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
Result
1.
Press
The speaker is activated
Or
The voice mail system is
automatically dialed
Press
You can also use the feature code *
5 to access the voice mail system
2.
Follow the voice mail system
prompts
Retrieve a Message from another Phone or Outside Location
Step
1.
Action
Result
Dial the voice mail access
number
The voice mail system answers
2.
Follow the voice mail system
prompts
EADS TELECOM North America Inc. - 2569-003
M
M
77
ITE-780 User Guide
Chapter 5
Directories and Logs
Directories and Logs
The following directories and logs can be accessed on the system.
Directory/Log
Storage
Description
Private Directory
Internal to phone
Allows you to store your most frequently dialed
names and numbers and allows you to initiate calls
from the directory. See "Private Directory"
Incoming Calls
Log
Internal to phone
Keeps a log of your incoming calls and allows you
to initiate calls from the directory only when the
number is known. See "Incoming Calls Log"
Information
Directory
Internal to phone
Can be used to store specific information about the
phone and its user.
Abbreviated Dial
"Directory"
Assigned numbers
are stored on the
system.
Functions identically to the Abbreviated Dial
feature button. See "Abbreviated Dial".
Outgoing Calls Log Internal to phone
This log stores the records of the last 10 numbers
(LNR-Last Number
Redial)
called and is associated with the Green key
System Directory
See Outgoing Calls Log.
System-wide
The Name/Number directory on the system that
can be accessed by all users. See System
Directory.
Private Directory
The Private directory allows you to store up to 200 frequently dialed internal or external
numbers in 9 lists. The Private directory has these features:
•
The directory record contains the name and number and an optional note about the
party.
•
When a party that is listed in your Private directory calls, the display will show the
name and number of the caller. This caller will be stored by name in the Incoming
Calls log.
•
Directory records are stored in alphabetical order.
•
You can classify your directory records into one of none (9) lists.
EADS TELECOM North America Inc. - 2569-003
M
M
79
.
Chapter 5, Directories and Logs
•
You can customize list labels and assign different ring tones for each list to identify
callers.
Use the Red key
to terminate or abort any of the following procedures.
Private Directory Screen
Screen Icons used with the Private Directory
Screen Icon
Definition
Returns to the main screen
Creates lists, and ring tones and volumes for each list
Adds a record to the directory
Opens the alphabetic screen
Modifies list characteristics
Deletes lists and records
Saves a record
Stores access codes such as passwords
Inserts a pause between access sequences
80
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Screen Icon
Definition
Inserts a character when using the alphabetic display
Or
Backspaces to delete the character at the left of the cursor
Places a call to the party in this record
Access the Private Directory
Step
Action
1.
Press
Result
An empty directory:
A directory with entries:
Create a List in the Private Directory
You can utilize 9 different lists in the Private directory and choose different ring melodies
for each list.
Condition:
You are already in the Private directory
EADS TELECOM North America Inc. - 2569-003
M
M
81
Chapter 5, Directories and Logs
Step
Action
1.
Press
2.
Press
Result
The alphabetic screen is displayed
Inside the List name box
3.
Enter the name (up to 14
characters)
4.
Go to Ring to select the ring
melody
5.
Press
The ring melody is played with each
selection
Or
Until the melody is
selected
6.
Go to Volume to select the ring
melody volume
7.
Press
Or
The melody is played at each
selected volume
Until the ring melody
volume is selected
82
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
8.
Press
Result
2-beep confirmation tone
The list and its attributes are stored.
You can:
• Create a record in the list
• View the list
• Delete the list
• Create another list
• Search by name
Create a Record in a Private Directory List
You can store up to 200 records in the Private directory. You will see "Already
Registered" if the name or number is already stored in the directory.
Step
Action
1.
Press
2.
Press
3.
Press
Result
The directory screen is
displayed
The list icon where the new
directory record will reside
The numeric screen is displayed
4.
Enter the phone number
including all access codes
(maximum of 23 digits)
5.
Enter the name of the party
(up to 16 characters)
6.
Press
The alphabetic screen is displayed
2-beep confirmation tone
The record is stored
7.
Optional:
The alphabetic screen is displayed
Press
Inside the Note field with
the stylus
8.
9.
Enter an optional comment
for this record
Press
EADS TELECOM North America Inc. - 2569-003
The record is stored
M
M
83
Chapter 5, Directories and Logs
Search for a Record in a Private Directory List
The screen displays the first six records in a list.
Condition:
You are already in the Private directory.
Step
Action
1.
Result
Choose the list:
Press
2.
The desired list icon
The display shows the names and
numbers
Optional:
Press
Or
To show the next or
previous pages or records
3.
The display shows the details of
the record.
Open the record:
Press
Inside the Name field with
the stylus
You can:
• Call the party
• Edit the record
• Delete the record
• Store another record
Search by Name in the Private Directory
Condition:
You are already in the Private directory:
Step
Action
1.
Press
2.
Result
The alphabetic keypad screen
opens
Enter the first letter or
letters of the party's name
As you enter each letter, the
flashing number field under
"Name?" indicates how many
entries have been found to match
your search.
If only one record is found, the
screen displays the record
When two or more records are
found, the screen displays the list
of names
84
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
3.
Action
Result
Optional:
Press
To enter the name again to
narrow the search
Modify a Record in the Private Directory
Step
Action
1.
Press
2.
Press
3.
Press
Result
The directory screen is displayed
The list icon where the
directory record resides
The directory record is displayed
Inside the Name field with
the stylus
4.
Press
Inside the field that needs
to be modified
5.
Make the modifications
6.
Press
2-beep confirmation tone
The record is modified
If the number is modified, the
screen prompts to modify the name
as well. You can press
if you
do not want to modify the name
7.
To move the record to another list,
go to List:
Press
8.
Or
Press
The record is moved to the new list
On Navigator or screen
EADS TELECOM North America Inc. - 2569-003
M
M
85
Chapter 5, Directories and Logs
Delete a Record in the Private Directory
Condition:
You are already in the Private directory and have found the record that you want to
delete.
Step
Action
Result
1.
Press
The display will prompt you to
verify the deletion
2.
Press
The record is deleted
2-beep confirmation tone
Modify a Private Directory List
Step
Action
Result
1.
Press
2.
Press
3.
To modify the name:
The icon of the list that you
want to modify
Press
Inside the List name field
with the stylus
4.
5.
Enter the new list name
To modify ring melody and volume
settings:
Press
6.
86
M
M
Press
Or
The list changes are stored
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Delete a Private Directory List
You can delete a Private directory list. You must have your phone password set up to
delete a list.
Condition:
You are already in the Private directory and have found the list that you want to
delete.
Step
Action
1.
Press
Result
2.
3.
Press
The list is deleted
2-beep confirmation tone
Place a Call from the Private Directory
Condition:
You are already in the Private directory and have selected a record.
EADS TELECOM North America Inc. - 2569-003
M
M
87
Chapter 5, Directories and Logs
Step
Action
1.
Press
Result
Or
The number is dialed after a short
delay
Press
Delete All Records from the Private Directory
Step
Action
Result
1.
Press
2.
Press
3.
Press
The screen prompts you for your
password
Press
2-beep confirmation tone
4.
5.
All records have been deleted
88
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Information Directory
The Information directory allows you to view information about the phone and the user.
You can store three personal numbers and a welcome message. You cannot modify the
serial number for the phone or the software release information that comes from the
system.
Use the Red Key
to terminate or abort any of the following procedures.
Information Directory Screen
View the Information Directory
You can view the Information directory at any time.
Condition:
EADS TELECOM North America Inc. - 2569-003
M
M
89
Chapter 5, Directories and Logs
Step
Action
1.
Press
2.
Press
Result
Returns to the main screen
Access the Information Directory
Step
Action
1.
Press
2.
Press
Result
Add Personal Numbers
Step
Action
1.
Press
2.
Press
3.
Press
Result
Inside the first field that is
associated with one of the
numbers
4.
90
M
M
The alphabetic keypad is displayed
and prompts you to enter the label
name for the number
Enter the label name
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
5.
Press
Result
The label is saved
On the screen or the
Navigator
6.
Press
The numeric keypad is displayed
Inside the second field that
is associated with the same
number
7.
Enter the number
8.
Press
The number is saved
On the screen or the
Navigator
9.
If you want to enter other numbers,
repeat from Step 3.
Enter the Welcome Message
Step
Action
1.
Press
2.
Press
3.
Press
Result
Inside the field with the
Welcome message
4.
5.
The alphabetic keypad is displayed
and prompts you to enter the
message
Enter the Welcome
message
Press
The Welcome message is saved
On the screen or the
Navigator
The Welcome message is
displayed on your main screen
Modify or Delete Information
Condition:
You have selected the heading to modify or delete.
EADS TELECOM North America Inc. - 2569-003
M
M
91
Chapter 5, Directories and Logs
Step
1.
Action
Result
To insert characters:
Press
Or
On the Navigator
2.
To delete the character at the left of
the cursor:
Press
3.
To delete an entire record:
Press
4.
To end the modifications
Press
On the screen or the
Navigator
Incoming Calls Log
The Incoming Calls log can store call information about the last 50 calls received, either
answered or unanswered.
The following are features of the Incoming Calls log:
•
The log icon will display the number of new calls in the incoming calls log
•
If the party is stored in your private directory, the name will be stored in alphabetical
order instead of by number.
•
You can use the Incoming Calls log whether the phone is idle or busy.
•
One record will display the number of times that the party called.
•
You can initiate a call from the log.
•
You can create a record in the Private directory from the log.
•
You can delete one record or all records.
•
When the log is full, a new call will overwrite the oldest call record.
Use the Red Key
92
M
M
to terminate or abort any of the following procedures.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Incoming Calls Log Screen
Message Lamp Status
Lamp
Status
Description
On
There is at least one new message in your voice mailbox
Off
There are no new messages in your mailbox
Blink
There are no new messages in your mailbox, but there is a new
call in the Incoming Calls log
Flash
There is a message in your mailbox, and a new call in the
incoming calls log
Log Icon on Screen
When you have new calls in your Incoming Calls log that have not been viewed, the
icon will alternate between flash and display the number of new calls present in
the log.
Call Record Display
The following table shows the possible Incoming Calls log displays.
EADS TELECOM North America Inc. - 2569-003
M
M
93
Chapter 5, Directories and Logs
Display
Description
Caller identification is not available.
If only the number is stored, the display will
show the number instead of the name
The “>” indicates that the log record has been
read
The “>>” indicates that log record has been
called back
The caller identity is not known
Access the Incoming Calls Log
Step
Action
1.
Press
2.
Press
Result
Or
To display the next or
previous screens if
necessary
Place a Call from the Incoming Calls Log
Condition:
You have selected a record in the Incoming Calls log and want to place a call to that
party.
94
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
1.
Press
Result
In the name field of the
record
2.
Press
The call is automatically dialed after
a short delay.
Or
Press
View the Private Directory from the Incoming Calls Log
If the called party is listed in your Private directory, you can view the record.
Conditions:
You have selected a record in the Incoming Calls log and want to view the details in
the Private directory.
The
icon is available as a choice.
Step
Action
1.
Press
Result
In the name field of the
record that you want to
view
2.
Press
EADS TELECOM North America Inc. - 2569-003
M
M
95
Chapter 5, Directories and Logs
Store a Record into the Private Directory
You can add the name and number of the party to your Private directory.
Conditions:
You have selected a record in the Outgoing Calls log and want to store this record in
your Private directory.
The
icon is available as a choice
Step
Action
Result
1.
Press
The record is automatically stored
in the Private directory
2.
If the party's name is not in the log:
The alphabetic keypad opens
Press
In the name field of the
record
3.
4.
Enter the name
Choose the list:
Press
Or
To choose the list for the
entry
5.
6.
Enter an optional note
Press
The record is stored
Delete an Incoming Calls Log Record
Step
Action
Result
1.
Press
The display warns that the
record will be
permanently deleted
2.
Press
The record is deleted
The display shows the
updated list
96
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Outgoing Calls (LNR) Log
The Outgoing Calls log (LNR or Last Number Redial log) stores the records of the last 10
internal or external numbers called. The Outgoing Calls log has the following features:
•
While viewing, you can automatically redial one of the numbers stored.
•
When the log is full, the next call overwrites the oldest call record.
•
If a call has been redialed several times, the calls counter in the record for that
number is incremented rather than storing separate records for the same number.
•
You can erase one record or the erase entire log.
Use the Red Key
to terminate or abort any of the following procedures.
Outgoing Calls Log Screen
EADS TELECOM North America Inc. - 2569-003
M
M
97
Chapter 5, Directories and Logs
View the Outgoing Calls Log
Step
Action
1.
Press
Result
Or
Press
1 time
If you press
2 times, the last
call dialed will automatically be
placed
The number is displayed if the
name is not known
2.
If necessary:
Press
Or
to view the
next or previous screen
Place a Call from the Outgoing Calls Log
Condition:
You have selected a record in the Outgoing Calls log and want to place a call to that
party.
Step
Action
1.
Press
Result
In the name field of the
record
2.
Press
The number is automatically dialed
Or
Press
The call is placed after a 5-second
delay
View the Private Directory from the Outgoing Calls Log
If the called party is listed in your Private directory, you can view the record.
98
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Conditions:
You have selected a record in the Outgoing Calls log and want to view the details in
the Private directory.
The
icon is available as a choice.
Step
Action
1.
Press
Result
In the name field of the
record that you want to
view
2.
Press
Store a Record into the Private Directory
You can add the name and number of the party to your Private directory.
Conditions:
You have selected a record in the Outgoing Calls log and want to store this record in
your Private directory.
The
icon is available as a choice
Step
Action
Result
1.
Press
The record is automatically stored
in the Private directory
2.
If the party's name is not in the log:
The alphabetic keypad opens
Press
In the name field of the
record
3.
Enter the name
EADS TELECOM North America Inc. - 2569-003
M
M
99
Chapter 5, Directories and Logs
Step
4.
Action
Result
Choose the list:
Press
Or
To choose the list for the
entry
5.
6.
Enter an optional note
Press
The record is stored
Delete a Record from the Outgoing Calls Log
Step
Action
Result
1.
Press
The display warns that the record
will be deleted
2.
Press
The record is deleted
The display shows the updated list
System Name/Number Directory
The System Name/Number directory is a list of all of the employees of the company and
can be accessed by all users. You can search by name in this directory and can dial a
party directly from the directory. The system administrator maintains the System
directory.
Step
Action
1.
Press
2.
100
M
M
Result
Enter the first
character(s) of the name
with the alphabetic
keypad
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Step
Action
3.
Result
If necessary:
Press
To erase the last
character
Press
To erase the entire input
Press
To exit the function
4.
Press
5.
If necessary:
Press
Or
To scroll through the
entries
Press
To back up to the
previous prompt
Dial a Party from the System Name/Number Directory
Condition:
You are in the System directory and have found the party to call.
EADS TELECOM North America Inc. - 2569-003
M
M
101
Chapter 5, Directories and Logs
102
M
M
Step
Action
1.
Press
Result
The number is automatically dialed
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 6
Feature Codes
Feature Codes
If your phone does not have one of the following keys, use a feature code if it is available
for use.
•
For those feature codes that require dial tone, press the SPKR key or lift the handset
first.
•
For those features that are accessed from an existing call, use the ACCESS key to
hold the call and return to dial tone.
Feature
Abbreviated Dial
Action
Feature Code
Or Press
Callback - Leave a
Callback
Callback - Return a
Callback
Or Press
Call Park
Call Pickup
Or Press
Conference
Data
Do Not Disturb - Turn On
Do Not Disturb - Turn Off
Call Forward - Turn On
Call Forward - Turn Off
Or Press
Or Press
Or Press
Or Press
Hold
EADS TELECOM North America Inc. - 2569-003
M
M
103
Chapter 6, Feature Codes
Feature
Last Number Redial
Action
Feature Code
Or Press
Transfer/3-Way
Conference
Voice Mail
Or Press
Numeric Feature Codes
The optional Numeric Feature Code feature allows you to use an all-number code that
omits the * and # signs in place the feature key or the standard feature code. The
Numeric Feature Code option was originally designed for rotary phones.
Numeric codes may be two to four digits long. If this option is available on your system,
the codes can be obtained through the system administrator.
104
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Chapter 7
Telephone Tests
Telephone Tests
You can perform a number of tests on your phone, such as phone self-test, lamp test, and
system tone test. You can also gather information about your phone such as class of
service, cabinet/card/slot information, directory number, etc.
Use the Red Key
to terminate or abort any of the following procedures.
Basic Procedures
The following procedures apply to all tests except system tones.
Step
Action
1.
Result
Offhook
2.
Press
Silence
3.
Press
1-beep
4.
Press
1-beep
5.
Press
2-beep confirmation tone +
the code number
+
Basic Telephone Self-Test
The following test will restore the key lamps and the display on the phone.
Step
Action
1.
Result
Offhook
2.
Press
Silence
3.
Press
1-beep
EADS TELECOM North America Inc. - 2569-003
M
M
105
Chapter 7,Telephone Tests
Step
Action
Result
4.
Press
1-beep
5.
Press
2-beep confirmation tone and then
silence
You may not hear 2 complete
beeps because the phone does
reset.
The number to the right is the load number
6.
Press
7.
8.
Silence
Or Press
Press
Normal display and lamps are restored
Key Lamps Test
Step
Action
Result
1.
Press
2.
Press a feature key or line key 5
separate times
2 beep confirmation tone
and then silence
See these lamp states:
ON, blink, flash, flash, ON
1 beep after each key
press
106
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Informational Tests
The following tests can be run on the phone.
Test Name
Action
Response
Class of Service
Press
Class of Service
Key Template
Press
Key Template
Number
Directory
Number
Press
Directory
Number
Port Number
Press
System time slow
number
Press
3 Terminal types
if applicable
(IBX Classic
Systems)
Terminal Type
1. Inside Term Type
2. Outside Term Type
3. Current Term Type
User Group
Press
User Group
Number
Data Directory
Number (if
assigned)
Press
Data Directory
Number
System Port
Location
Press
Cabinet, Shelf,
Slot
Trunk Port
Location
During trunk call, enter this
sequence:
Cabinet, Shelf,
Slot of trunk port
Press
+
EADS TELECOM North America Inc. - 2569-003
M
M
107
Chapter 7,Telephone Tests
System Tone Tests
Action
108
M
M
Result
Press
Silence
Press
Inside Dial Tone
Press
Outside Dial Tone
Press
Modem Tone
Press
Milliwatt Tone
Press
Busy Tone
Press
Reorder Tone
Press
Ringback Tone
Press
Call Wait Ringback Tone
Press
Zip Tone (One Beep)
Press
Zip Zip Tone (2 Beeps)
Press
Inside Call Wait Tone
Press
Outside Call Wait Tone
Press
Override Warning Tone
Press
"Held"
Press
"Enter"
Press
"Private"
Press
"Forward"
Press
"Message"
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Action
Press
EADS TELECOM North America Inc. - 2569-003
Result
"Voice Mail"
M
M
109
Chapter 7,Telephone Tests
110
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Appendix I
Glossary
Glossary
Term
Definition
Access Code
A one or two digit number that must be dialed before an
outside call can be made.
Account Code
A billing number for long distance calls that may be
assigned as a part of a user's dialing procedure.
Alphabetic Keypad
A QWERTY keyboard located under the cover at the
bottom of the phone.
Authorization Code
A unique number that may be assigned to a user or a
directory number which, when dialed, permits authorized
usage of system features.
Centergy
Centergy ® is a call center management tool that
integrates with PointSpan 6880 systems.
Code (Abbreviated Dial)
The single or double-digit number that a user assigns to a
phone number when setting up Abbreviated Dial feature.
This code number is used in place of the complete phone
number.
Extension/Directory Number
A number assigned to an individual telephone set which,
when dialed, allows access to that telephone set; an
internal phone number.
External (call or number)
A call to a number that is outside of the phone system.
Feature Codes
A combination of the star (*) or the pound (#) symbol
plus a single digit of the pad. Each code accesses a
specific system feature.
Example: Feature Code "*3" activates the Call Forward
feature. See Feature Codes in Chapter 4.
Or
A Numeric Feature Code (two to four digits) is used to
access features on rotary phones that do not have a * or a
# symbol.
Features
EADS TELECOM North America Inc. - 2569-003
Capabilities of a phone other than placing and receiving
calls. For example, Hold, Transfer, Call Forward, Call
Back Queuing, etc.
M
M
111
Appendix I,Glossary
112
M
M
Term
Definition
Incoming Calls
Calls that are made from outside of the system to an
extension inside of the system.
Internal (call or number)
A call or phone number (extension) that is inside the
system.
Numeric Keypad
A set of twelve buttons (0 through 9) and two symbols (*
and #).
Line or Line Appearance
An extension/directory number that appears on a phone.
Microphone
The built-in microphone, activated by the SPKR button,
provides the ability to use the phone without the handset.
The microphone is located on the lower front of the
phone in the right-hand corner
Multi-Line Phone
A phone having more than one extension number.
Numeric Feature Code
A Numeric Feature Code (two to four digits) is used to
access features on rotary phones that do not have a * or a
# symbol.
Off-Hook
A term that indicates that the handset of the phone has
been removed from the switchhook or the SPKR button
has been turned on.
On-Hook
A term that indicates that the handset of the phone is
resting on the switchhook. The phone is hung-up or the
SPKR button is turned off. (See On-Hook Dialing)
On-Hook Dialing
Dialing a call by using the SPKR button instead of
removing the handset from the switchhook. The ITE12+phone is designed especially for this.
Outgoing Calls
Calls that are placed from an extension inside of the
system to a destination that is outside of the system.
Park
A feature that allows a call to be placed in a temporary
hold state and assigned an extension number. The call
can be retrieved from any extension in the system by
dialing the number assigned to the call.
PDI 1000
Provides an interface for 300 bps to 38.4 Kbps
asynchronous RS-232C data.
Pickup
Allows calls that ring in at another extension to be picked
up at extensions that are members of the same Call
Pickup group.
Prime Line
The main extension on an ITE phone that is
automatically selected to place or receive calls when the
handset is lifted or the SPKR button is turned on. The
line button does not have to be pressed to make or
answer calls.
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Term
Definition
Program
The instructions that you give to the phone through
number codes (feature codes or buttons) to activate a
feature.
Queuing
The process of placing calls in a holding pattern (a
waiting line) until an outgoing line is available. The
system assigns outgoing on the basis of priority or first
come/first served.
System (Telephone System)
A term used in this guide that refers to PointSpan 6880
telephone switching systems.
Voice Prompt
A computerized voice heard through the handset or
speakerphone that indicates that a feature has been
activated. It may also inform or give instructions to the
user.
EADS TELECOM North America Inc. - 2569-003
M
M
113
Appendix I,Glossary
114
M
M
EADS TELECOM North America Inc. – 2569-003
ITE-780 User Guide
Appendix I
Troubleshooting
Troubleshooting
The following table represents the more common problems found with a phone, and
provides possible causes.
Problem
No display
No dial tone
No sound in the
handset
Cannot dial out of the
system
Possible Cause
• Check for dial tone
• Check the connection to the phone jack
• Check that the other phones in the system are operating
• Check the setting of display contrast
• Check the connection to the phone jack
• Check the connection of the handset and/or the headset
• Check that other phones in the system are operating
• Check volume setting of handset, speaker, or headset
• Check the volume setting of the handset, speaker, or
headset
•
Check that you have the rights to make external calls
(External Calls)
No voice messages
received
The phone is not
ringing
• Check your connection to the voice mail system
• Check your welcome message or voice signature record
on the voice mail system
• Check activation of call forwarding to your voice
mailbox
• Check the volume of the ring melody
• Check Call Forward settings
EADS TELECOM North America Inc. - 2569-003
M
M
115