Samsung A850 - SCH Cell Phone User guide

SCH-A850 Series
P O R T A B L E
A l l - D i g i t a l
M o b i l e
P h o n e
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
YG30.03_WB_081205_F5
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
L.P.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1601 E. Plano Parkway, Suite 150
Richardson, TX 75082
Plano, TX 75074
Tel: 972.761.7000
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7001
Fax: 972.801.6065
Internet Address: http://www.samsungusa.com
©2005 Samsung Telecommunications America, L.P. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.
Licensed by Qualcomm Incorporated under one or more of the
following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Printed in South Korea
GH Code: GH68-06934A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
Section 1: Getting Started .................................. 5
Turning Your Phone On and Off .......................................... 6
Setting Up Your Voicemail .................................................. 6
Understanding this User Manual ......................................... 7
Section 2: Understanding Your Phone ............... 9
Features of Your Phone .................................................... 10
Front Views of Your Phone ................................................ 11
Command Keys ................................................................ 14
Understanding the Display Screen .................................... 16
Battery ............................................................................. 19
Section 3: Call Functions .................................. 23
Making a Call ................................................................... 24
Answering a Call .............................................................. 24
Call History ....................................................................... 25
Roaming .......................................................................... 28
TTY .................................................................................. 29
Voice Signal ..................................................................... 30
Voice Signal Options ......................................................... 37
Section 4: Menu Navigation ............................. 47
Menu Navigation .............................................................. 48
Menu Outline ................................................................... 50
Section 5: Entering Text ................................... 55
Changing the Text Entry Mode .......................................... 56
Using Word Mode ............................................................. 57
Entering Upper and Lower Case ....................................... 57
Entering Symbols ............................................................. 58
Entering Numbers ............................................................ 59
Section 6: Understanding Your Contacts ......... 61
Opening Contacts Menu ................................................... 62
Table of Contents
1
Table of Contents
Adding a Contact ..............................................................63
Adding Pauses .................................................................65
Contacts Groups ...............................................................65
Finding a Contacts Entry ...................................................69
Editing an Existing Contact List Entry ................................69
Deleting a Contact Entry ...................................................70
Storing Numbers After a Call ............................................70
Speed Dialing ...................................................................71
Finding My Phone Number ...............................................72
Section 7: Messaging ....................................... 75
Types of Messages ...........................................................76
Message Folders ..............................................................76
Sending PIX Messages .....................................................76
Receiving a PIX Message ..................................................78
Retrieving New Messages ................................................83
Voicemail .........................................................................84
Creating and Sending New Messages ...............................85
Mobile IM .........................................................................88
Section 8: Changing Your Settings .................. 89
Display Settings ...............................................................90
Short Cut Key ...................................................................94
Security Settings ..............................................................94
Voice Privacy ....................................................................97
Location Settings ..............................................................98
Changing Message Settings ...........................................100
Call Settings ...................................................................103
Ringer Settings ...............................................................105
Resetting Your Phone .....................................................106
Section 9: Multimedia ..................................... 107
Get It Now ......................................................................108
Get Tunes & Tones .........................................................108
Get PIX ...........................................................................109
2
Table of Contents
Get Fun & Games ........................................................... 112
Get News & Info ............................................................. 112
Get Going ....................................................................... 113
How Keys Work .............................................................. 114
Section 10: Organizer ..................................... 117
Calendar ........................................................................ 118
Alarm Clock ................................................................... 120
World Clock .................................................................... 122
Notepad ......................................................................... 123
Calculator ...................................................................... 124
Voice Services ................................................................ 125
Section 11: Mobile Web .................................. 127
Mobile Web .................................................................... 128
Launch Mobile Web ........................................................ 128
Exit Mobile Web ............................................................. 129
Navigate the Web ........................................................... 129
Mobile Web Soft Keys .................................................... 129
Links .............................................................................. 131
Place a Call While Using Mobile Web .............................. 131
Section 12: Health and Safety Information .... 133
Health and Safety Information ........................................ 134
Consumer Information on Wireless Phones ..................... 136
Road Safety ................................................................... 146
Operating Environment ................................................... 148
Using Your Phone Near Other Electronic Devices ............ 149
Potentially Explosive Environments ................................. 151
Emergency Calls ............................................................ 152
FCC Notice and Cautions ................................................ 153
Other Important Safety Information ................................. 154
Product Performance ..................................................... 155
Availability of Various Features/Ring Tones ..................... 156
Battery Standby and Talk Time ....................................... 156
Table of Contents
3
Table of Contents
Battery Precautions ........................................................157
Care and Maintenance ....................................................159
Section 13: Warranty Information .................. 161
Standard Limited Warranty .............................................162
Index ............................................................... 169
4
Section 1: Getting Started
Topics Covered
• Turning Your Phone On and Off
• Setting Up Voicemail
• Understanding This User Manual
• Customer Support
Section 1
This section allows you to start using your phone by
activating your service, setting up your voicemail,
contacting customer support, or getting an
understanding of how this manual is put together.
Section 1: Getting Started
5
Turning Your Phone On and Off
Turning Your Phone On
1. Open the flip, then press
.
2. Your service provider’s name momentarily appears in the
display and the phone begins searching for a network
signal.
Section 1
3. Once the phone finds a signal, the time, date, and day
appear in the display.
4. You’re now ready to place and receive calls.
If the phone is outside of the Verizon Wireless coverage or
roaming area, appears in the top of the display.
Turn Your Phone Off
Press and hold
powers off.
for two or more seconds. Your phone
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which
can be retrieved any time.
Note: Once your voicemail account has been set up, you can use the
Voicemail selection 7 (under the Messaging menu) to view details of voice
messages in your voicemail box.
Voicemail Setup
1. In standby mode, press and hold
or enter
or dial your own mobile number to dial voicemail.
2. Follow the prompts in the new user tutorial to setup your
mailbox.
6
Understanding this User Manual
Listen to Voicemail
1. In standby mode, press and hold
, enter
, or dial your own mobile number and press
dial voicemail.
to
2. You are then prompted to enter your password.
Understanding this User Manual
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 133.
Notes and tips
Throughout this guide are icons and text that are set apart
from the rest. These are intended to point out important
information, quick methods for activating features, to
define terms, and more. The definitions for these methods
are as follows:
• Notes: Explain alternative options within the current feature,
menu, or sub menu.
• Tips: Provide quick or innovative methods for performing
functions related to the subject at hand.
• Fast Facts: Are like snippets from the glossary. Fast facts
provides definitions in context and proximity to the menu or
feature in question.
Section 1: Getting Started
7
Section 1
The chapters of this manual generally follow the same
order as the menus and sub menus in your phone. A
robust index for quick reference to most features begins
on page 169.
• Important: Points out important information about the current
Section 1
feature that could affect performance, or even damage your
phone.
8
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Front View of Your Phone
• Command Keys
• Understanding the Display Screen
• Battery
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2
Section 2: Understanding Your Phone
9
Features of Your Phone
• Domestic and international voice and text messaging service
(available on participating networks).
• High speed data (CDMA 2000 1x Technology)
• Global Positioning (GPS) Technology
• PIM Functions
• MMS Messaging
• TXT Messaging
• PIX Messaging
• E-mail Messaging
• Instant Messaging
• Built-in Digital Camera
• Voice Dial
Section 2
• Speakerphone
10
Front Views of Your Phone
Front Views of Your Phone
The following illustrations show the main elements of
your phone:
Open View
Section 2
Features
1. Receiver: The receiver allows you to hear the other caller.
Section 2: Understanding Your Phone
11
2. Display Screen Icons: Indicates the status of your phone,
including status icons, message indicators, signal
strength, etc.
3. Navigation Keys: This key allows you to scroll through
the phone menu options.
4. Left Soft Key: This key is used to navigate through
menus and applications by selecting the choice available
in the Left Soft key Option.
5. Send Key: Allows you to place or receive a call. In
standby mode, press the key once to access the recent
call log.
6. Camera Key: Allows you to launch the camera and take
pictures.
7. Special Function Keys: Enter’s special characters.
Performs various functions.
Section 2
8. Power/Accessory Connector: The power/accessory
interface connector is used to plug in the charging
accessories and also connect any available accessory
cables to your phone.
9. Microphone: The Microphone allows the other caller to
hear you clearly when you are speaking to them.
10. Voice Recognition Key: Launches VoiceSignal options.
11. Alpha-numeric Keys: Use these keys to enter numbers,
letters, and characters.
12
Front Views of Your Phone
12. End Key: Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to mute the ringer and send the call to
voicemail.
13. Clear Key: Deletes characters from the display when you
are in text entry mode. Press to return to the previous
menu or screen when navigating features on your phone.
14. Right Soft Key: This key is used to navigate through
menus and applications by selecting the choice available
in the Right Soft key Option.
15. Center/OK Key: Pressing when navigating through a
menu accepts the highlighted choice in a menu.
Closed View
Section 2
Features
1. Headset Jack: Allows you to plug in an optional headset
for safe, convenient, hands-free conversations.
Section 2: Understanding Your Phone
13
2. Volume Key: Allows you to adjust the master volume in
standby mode (with the flip open) or adjust the voice
volume during a call. To mute the ringer during an
incoming call, press the volume key up or down.
3. Speaker Mode Key: Enables and disables speaker phone.
4. Camera Key: Launches the Camera feature of your
phone.
5. Camera Lens: The lens of your built-in camera.
Command Keys
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the left
soft key
and the right soft key
.
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the Message (left) soft key
to open
Section 2
the Messaging menu.
• When the left soft key function is Settings, press the Settings
(left) soft key
to view settings for the feature.
• When the left soft key function is Edit, press the Edit (left) soft
key
to edit a Contact.
Right Soft Key
Some functions of the right soft key are as follows.
• When the right soft key function is Options, press the Options
(right) soft key
and a pop-up screen displays.
• In standby mode, press the Contacts (right) soft key
open your Contacts list.
14
to
Command Keys
Clear Key
The CLR key
is used to erase or clear numbers, text, or
symbols from the display. You can also use
to return
to a previous menu or to return to standby mode from any
menu.
1. If you enter an incorrect character, briefly press
backspace (and delete) the character.
to
2. To erase the entire sentence, press and hold
3. To back up one menu level, briefly press
4. To return to standby mode, press and hold
return to standby mode.
.
.
until you
End Key
1. Press and hold the End key
2. Briefly press
to turn on your phone.
once to disconnect a call.
3. Press
to return to standby mode from any menu, or
to cancel the last input.
The Send key
is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
1. Press
once to answer calls.
2. Enter a number and briefly press
to make a call.
3. Briefly press
in standby mode to display a list of
recent calls to and from your phone.
4. Press
twice in standby mode to call the most recent
number.
Section 2: Understanding Your Phone
15
Section 2
Send Key
5. Press
to pick up a waiting call. Press
switch back to the other call.
again to
Navigation Key
Use the directional keys on the navigation key to browse
menus, sub menus, and lists. Each key also acts as a
shortcut to launch applications. The down navigation key
is user-definable.
Speakerphone Key
Use the speakerphone key (located on the right side of
your phone) to switch from using the earpiece to the
speakerphone before or during a call. Use the volume
keys (located on the left side of your phone) to adjust the
volume. Press the speakerphone key to enable and
disable the speakerphone option.
Section 2
Understanding the Display Screen
The bottom line of the display is reserved for icons that
indicate speakerphone, messaging and the top line is
reserved for icons that indicate network status, battery
power, signal strength, and more. The following table lists
some display icons and their descriptions.
Display icons
Signal Strength: Always appears when your phone is
on and indicates the current signal strength. More lines
indicate a stronger signal.
16
Understanding the Display Screen
Roaming Indicator: Your phone is outside your home
area. While roaming, another wireless provider may be
handling your call. The service rate for the call may be
higher than those made from within your home area.
Please refer to Verizon Wireless for roaming rates.
Digital: IS95-2G Protocol: Indicates your phone is using
the IS95-2G protocol. This protocol is not capable of high
speed data.
1X Protocol: Indicates your phone is using the 1X
protocol.
Note: 1X protocol is available only in the Verizon Wireless network.
SSL: Indicates the secure socket layer is active transmits
your communications over the internet in an encrypted
format.
Voice Privacy: When enabled (Enhanced), turns on
advanced voice encryption.
because you’re outside a service area. You cannot make
or receive calls. Wait for a signal or move to an open area
to find a signal. This indicator always appears when you
first turn on your phone and disappears once service is
located.
Voice Call: Indicates a call in progress.
Data Call: Indicates a call in progress.
E911: Global Positioning Service (GPS) for 911 is set to
On for emergency calls only.
Section 2: Understanding Your Phone
17
Section 2
No service indicator: Your phone cannot find a signal
Location On: Global Positioning Service is set to On for
location and 911 calls.
Battery Level: More bars indicate a greater charge.
When the battery is low, an empty battery icon flashes
and the phone sounds an alert, which indicates your
phone is about to shut down.
TTY: Indicates that TTY is enabled.
All Sounds Off: The ringer is silenced for all alerts,
incoming calls, and incoming messages. The phone
alerts you by vibration.
Alarm Only: Your phone will only ring when the set
alarm sounds.
Vibrate On: Your phone vibrates upon receiving a call.
Speakerphone: Your phone switches to
speakerphone instead of earpiece.
Missed Calls: Your phone displays this icon when calls
Section 2
are missed.
Message: You’ve received a new text message. You’re
also notified of a new message by animations and sound.
You have one or more unread voicemail messages in your
voicemail box. (Only applicable on Verizon Wireless
Network.)
Calendar Appointment: Your phone displays this icon
when you have a calendar appointment scheduled.
Voicemail: You’ve received a voicemail message.,
Auto Answer: Automatic answer is enabled. Your phone
automatically picks up any calls after the designated time.
18
Battery
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or
warn of situations such as low memory. Dialogue boxes
and their definitions are outlined below.
• Choice
• Example: “Save message draft?”
• Reconfirm
• Example: Delete all received messages?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message sent successfully!”
• Information
• Example: “New Message”
Section 2
• Error
• Example: “System Error!”
• Warning
• Example: “Battery Low,” “Memory Full!”
Battery
Note: This phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel charger.
Section 2: Understanding Your Phone
19
Important: Although the phone can be used while the battery is charging,
the battery must be fully charged before first use, otherwise you could
damage the battery.
1. Insert the bottom end of the
battery into the phone
housing with the label side
down. The gold contacts on
the end of the battery should
match up with those on the
phone.
2. Push the top end of the battery down until it snaps into
place.
Remove the battery
Section 2
1. Pull the battery release latch
toward the top of the phone.
The top of the battery should
pop up.
2. Use your finger to lift the
battery (top end first) up and
away from the phone.
Charge the Battery
Your phone is powered by a rechargeable standard Li-Ion
battery. Only use Samsung-approved charging devices
and batteries. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
20
Battery
Use the Travel Charger
The travel charger operates from a 120/220 VAC wall
outlet.
1. Plug the AC plug from the desktop charger into a
standard 120 VAC or 220 VAC wall outlet.
Note: You can use your phone while charging, however, the battery
charges faster if the phone is turned off.
Battery Indicator
The battery indicator
in the upper-right corner of the
display indicates battery power level. Four bars indicate
a full charge, while an empty icon
indicates an almost
empty battery. Two to three minutes before the battery
becomes too low to operate, a blinking empty battery icon
appears and a tone sounds. If you continue to operate
the phone without charging, it shuts down.
Section 2
Section 2: Understanding Your Phone
21
22
Section 2
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Call History
• Roaming
• TTY
• Voice Signal
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3
Section 3: Call Functions
23
Making a Call
1. In Standby Mode, enter the number you want to call
using the keypad.
2. Press
.
Making Calls Using Contacts
Contacts are entries that you create to store names,
numbers, and other information for people or groups of
interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily. See
"Adding a Contact" on page 63 for information on creating
contacts.
1. At the standby screen, press the right soft key Contacts.
2. Press or keys on the side of your phone until the
contact that you want to call is highlighted.
Tip: To quickly locate a name, press (or multi-press) any key on the keypad
that corresponds to the first, second, and/or third letters of the contact’s
name.
3. When the desired contact is highlighted, press
Details for the contact appear in the display.
4. If the entry contains more than one number, use
to highlight the desired number.
Section 3
5. Press
.
or
to call the number.
Answering a Call
When you receive an incoming call, the Incoming screen
appears in the display, press the
key to answer the call
24
Call History
or Ignore to send the call to voicemail, or Quiet to silence
the ringer.
Answering Call-Waiting Calls
• When you receive a call while on a call, the Incoming screen
displays. You can press
and answer the new call or let the
new call go to your voicemail.
• If you choose
and answer the incoming call, the original
caller is placed on call waiting. To return to your original call
when you finish with an incoming call, press the
Send key.
Call History
When you make, dial, or miss a call, a record of the call
is saved in Call History, which is a listing of the
different types of calls you can either receive or make.
These types of calls are listed below.
• Missed: Displays any missed calls.
• Received: Displays any received calls that were answered.
• Dialed: Displays all outgoing calls made from your phone.
• All: Displays all missed, received, and outgoing calls made from
your phone.
Viewing Call Information
Call History retains information such as the duration,
date and time, whether the call was received, dialed,
or missed.
Send key.
2. Press the down navigation key to highlight the desired
number.
Section 3: Call Functions
25
Section 3
1. At the standby screen, press the
3. Once the desired number is highlighted, press
OPEN.
4. The following options appear in the display.
• “type” call: Where “type” indicates if the call was
•
•
•
•
•
missed, dialed, or received.
Method: If the caller is in your Contacts list, the type of
call is listed here (
M-Mobile,
W-Work, etc.). This
option only appears if the caller is in your Contacts list.
Number: Displays the telephone number.
Date: The date of the call.
Time: The time of the call.
Duration: The duration of the call.
5. Press the right soft key
following options.
Options to display the
•
•
•
•
Save: Save the number to your Contacts list.
Details: Displays the contact information.
Erase: Delete the call from Call History.
Lock/Unlock: locks or unlocks the entry to prevent
accidental deletion.
• Erase All: Delete the entire Call History list at one time.
• View Timers: Select to view the call timers for your
phone.
Section 3
6. Press the down navigation key to highlight an option.
Press
to enter the highlighted option’s sub-menu.
Call History Icons
When you view Call History, an icon to the left of the
number indicates the type of call.
Indicates a Missed call
26
Call History
Indicates a Dialed call
Indicates a Received call
Making Calls Using Call History
1. In Standby Mode, press
then press up or down
navigation key until the desired number is highlighted.
2. Press
Open, then press
number.
to call the highlighted
Creating Contacts Using Call History
1. At the standby screen, press
then press up or down
navigation key until the desired number is highlighted.
2. Press the right soft key
Options. Use the up or down
navigation key to highlight Save, press
. Create New
is highlighted.
3. Press
•
•
•
•
•
to select from the following options:
Mobile 1
Mobile 2
Home
Work
Fax
4. Press
to add a new contact, and then enter
information.
5. Press
Save when finished.
1. At the standby screen, press
Send, then press up or
down navigation key until the desired number is
Section 3: Call Functions
27
Section 3
Delete Call History Entries
highlighted.
2. Press the right soft key
appears in the display.
Options. A pop-up menu
3. Select Erase and press
. Select Yes or No at the
ERASE ENTRY? and press
.
Delete All Call History Entries
1. At the standby screen, press
Send, then press up or
down navigation key until the desired number is
highlighted.
2. Press the
Open.
3. Press the right soft key
appears in the display.
Options. A pop-up menu
4. Press the down navigation key to highlight Erase All and
press
key. Select Yes or No at the ERASE ALL
ENTRIES? pop-up screen.
5. Press the
key.
Roaming
Section 3
What is Roaming?
Your phone can roam on other digital networks.
Roaming occurs when you travel outside a predesignated coverage area. The roaming icon displays
when roaming is active and extra charges may apply
when making or receiving calls.
Note: Some features may be unavailable while roaming.
28
TTY
Roaming Options
The following roaming options are available:
• Home Only - Your phone is available for normal operation only
in the designated coverage area.
• Automatic-A: The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital "A"
system is acquired.
• Automatic-B: The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital "B"
system is acquired.
Note: Contact your service provider for information regarding preferred
systems.
To change your Roaming option, follow these steps:
1. Press the
highlight
Menu key. Use the right navigation key to
Settings & Tools.
2. Use the down navigation key to highlight
System
and press the
key. System Select is highlighted.
3. Press the
key. Use the up or down navigation keys to
choose the setting you want, and press the
key.
TTY
1. Press the
highlight
Menu key. Use the right navigation key to
Settings & Tools.
Section 3: Call Functions
29
Section 3
Your phone is fully TTY compatible. Connect the TTY
equipment to the headset jack, which is located on the
left side of the phone. Before you can use your phone
with a TTY device, you’ll need to enable TTY
functions in the phone.
2. Use the down navigation key to highlight
Settings and press the
key.
3. Press
Call
TTY Mode. The TTY Mode screen displays.
4. Use the up or down navigation keys to choose from the
following:
•
•
•
•
TTY Off
TTY + HEAR
TTY + TALK
TTY Full
5. Press the
key to make your selection. The TTY
Mode Set screen displays.
Voice Signal
Voice Signal is advanced speech recognition software that
can be used to activate a wide-variety of functions on your
phone. Voice Signal software automatically voice
activates all contacts for voice dialing and searching, no
pre-recording or training needed. Speak phone numbers
naturally to dial, and use voice commands to launch
applications and navigate phone menus.
Voice Services Settings
You can adjust the settings and preferences for Voice
Signal by opening Voice Services menu. Using this menu,
you can change the following Voice Command features:
Section 3
• Launch V.Command
• Voice Memo
• TTS
• Voice Settings
30
Voice Signal
To access the Voice Services menu, follow these steps:
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
Tools, then
Voice Services.
3. Use the navigation keys to select the setting you want to
change.
Launch V.Command
This menu sets the Voice Dial options. Use the navigation
key to select the option and press
.
Voice Memo
You can record a phone number, parking location, or
simple reminders using Voice Memos.
Recording Memos
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
Tools, then
Voice Services.
3. Press
Voice Memo. Press the left soft key
New.
4. Press the
REC key to begin recording. Press the left
soft key
Pause or, if paused, press the
Resume
key to continue recording. Press the
STOP key to
stop recording.
Section 3
5. The new Voice Memo is saved with a system defined
name. Press the right soft key
Options to choose
from the following:
• Detail Info: provides the voice memo title, length, size,
recorded date and time.
• Rename: allows you to rename the voice memo.
Section 3: Call Functions
31
• Erase: allows you to delete the memo.
• Erase All: allows you to delete all voice memos saved.
Renaming Recordings
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
Tools, then
Voice Services.
3. Press
Voice Memo. Use the navigation key until the
recording you want to rename is highlighted.
4. Press the right soft key
Options. Press
to rename the Voice Memo.
Rename
5. Press and hold
until the current name for the
recording is deleted. Use the keypad to enter a new
name for the recording.
Press the
Save when finished or the right soft key
exit and return to the previous menu.
Back to
TTS
The Text To Speech (TTS) option allows you to listen to the
options as you navigate through the menu options. To
enable TTS, use the following steps:
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
Tools, then
Voice Services.
Section 3
3. Press
TTS. Use the navigation key to turn TTS ON or
TTS OFF.
4. Press
32
to save your setting.
Voice Signal
Voice Settings
You can adjust the settings and preferences for Voice
Signal by opening the Voice Settings menu. Using this
menu, you can change the following Voice Command
features:
• Digit Dialing: Use the Digit Dialing menu to adapt digit dialing
to your voice.
• Adapt Digits: Lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
60 seconds.
• Reset Digits: Erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
• Sensitivity: In Voice Signal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes
something even if nothing was said. When Voice Signal rejects
an utterance, it displays a message such as “Please repeat…”
or “No match found.” If you frequently experience these
messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (Voice Signal detects a
wrong match), you might be able to get better performance by
adjusting the Sensitivity setting toward Reject More.
• Choice Lists: If Voice Signal is not absolutely confident that it
• Automatic: Voice Signal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
Section 3: Call Functions
33
Section 3
has correctly identified a Name, Digit, or Contact it can
display a choice list of up to three possibilities, and prompt you
to confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Always On: When there are multiple alternatives, Voice
Signal always displays a choice list.
• Always Off: Voice Signal never displays a choice list.
Instead, the application picks the best from among the possible
choices.
• Sound: You can customize the Voice Signal user interface by
turning playback on or off for prompts, names, and numbers.
You can also change the speed and volume of name playback.
• Prompts: Turns playback on or off for prompts such as
“Please say a command.”
• Digits: Turns playback on or off for digits, for example, when
confirming a phone number.
• Names: Turns playback on or off for names.
• Name Settings: Adjusts the speed and volume of name
playback.
• About: Displays information about Voice Signal including
version number, build number, and device number.
Adapting Voice Signal
Section 3
Voice dialing works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may receive better results
after adapting the system to match their voices.
You should adapt Digit Dial only if the system is
frequently unable to recognize your speech. After you
adapt Digit Dial, your phone is customized to your voice,
and your voice only. Others will not be able to use it unless
they reset the phone to factory defaults.
Adaptation involves recording several digit sequences to
adapt the system to the unique properties of your voice.
The adaptation process takes about three minutes.
34
Voice Signal
Tips for adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, rerecord that sequence.
• Only adapt digits if you regularly have problems with digit
dialing. Once adapted, digit dialing will not work as well for
other people using your phone.
• Adapt Digit Dial to your Voice
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
Tools, then
Voice Services.
3. Press
Voice Settings. Press
Digit Dialing.
4. Adapt Digits is highlighted. Press the
key.
5. A short description of the Adapt Digits displays.
6. Read the description until you are comfortable to
proceed, then press
.
7. Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
Section 3
Wait for the beep and repeat the digits using your
normal tone of voice.
Section 3: Call Functions
35
8. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After six
sets of digits, the phone asks whether you want to do
more adaptation. Answer “Yes.”
10. After the 10th set of digits, the phone indicates that
adaptation is complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial
to its original state.
1. In Standby Mode, press
Menu. Use the right
navigation key to highlight
Settings & Tools.
2. Press
3. Press
Tools, then
Voice Services.
Voice Settings. Press
Digit Dialing.
Note: If you have not performed the Adapt Digits function, the Reset Digits
option will not be accessible.
Section 3
4. Highlight
Reset Digits and press the
key. The
Reset Digit Adaptation screen displays requesting
conformation of reset. Press
to proceed. Digit
Adaptation Reset is completed.
36
Voice Signal Options
Voice Signal Options
The following options are used by the Voice Signal
speech recognition on your phone.
Call Digit Dialing
Digit Dial allows you to dial any phone number by
simply speaking the digits into the phone. No training
is necessary, and Digit Dial is programmed to
understand natural speech.
1. Press and hold
for two seconds.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
Using Voice Dial
Use the Voice Dial command to dial any number stored in
your contact list by saying the name of the contact (Name
Section 3: Call Functions
37
Section 3
Speak clearly and say the command that you want to
use. If, after a few seconds, the device has not
recognized a command, it prompts you to repeat the
command. If, after a few more seconds, it still has not
recognized a command, it tells you "Sorry, no match
found," and cancels voice recognition.
Dialing). You can also use Voice Dial to dial any valid
telephone number, even numbers not stored in your
contact list, by speaking the individual digits in the
number (Digit Dialing).
Dialing a Name
To dial a name using Voice Dial:
1. Press and hold
for two seconds to start VoiceSignal.
2. Say "Voice Dial."
3. VoiceSignal prompts you to "Say the name or number."
4. Speak clearly and say the name of a person in your
contact list, first name followed by last name. For
example, say "John Smith."
Section 3
5. If VoiceSignal recognizes the name and there is one
number stored with that name, VoiceSignal repeats the
name and dials the number. If VoiceSignal is not sure
which name you said, it displays a choice list of up to
three names and prompts you with "Did you say?"
followed by the first name on the list.
38
Voice Signal Options
6. Say "Yes" to confirm the name or "No" to hear the next
name, or use the keypad to select the correct name from
the list.
7. If the recognized name has multiple numbers stored for it
(e.g., Mobile, Work, Home, etc.), VoiceSignal displays the
possible choices and prompts you with "Which
number?"
Section 3: Call Functions
39
Section 3
8. Indicate which number to call by saying one of the
choices. For example, say "Mobile." VoiceSignal repeats
what you said and then dials the number.
Note: If there is more than one Mobile number listed for an entry both
Mobile 1 and Mobile 2 display.
Dialing a Number
To dial a number using Voice Dial:
1. Press and hold
for two seconds to start VoiceSignal.
Section 3
2. Say "Voice Dial." VoiceSignal prompts you to "Say the
name or number."
3. Speak clearly and say a valid telephone number. For
example, say "781 970 5200."
40
Voice Signal Options
4. If it recognizes the number, VoiceSignal repeats it and
dials the number. If VoiceSignal is not sure it has
recognized the number, it displays a choice list of up to
three numbers and prompts you with "Did you say?"
followed by the first number on the list.
5. Say "Yes" to confirm the number or "No" to hear the next
one, or use the keypad to select the correct number from
the list. (See the section "Using Choice Lists" for more
information.)
Voice Memo
Voice Memo accesses the voice memo feature of your
phone. See "Voice Memo" on page 31.
Calendar
Looking Up Contact Information
Use the Contacts command to retrieve contact
information for any name stored in your contact list by
Section 3: Call Functions
41
Section 3
Calendar accesses the Calendar feature of your phone.
See "Calendar" on page 118.
saying the name. Contacts displays contact information
on the screen but does not dial any phone numbers for the
contact.
To look up information for a specific contact:
1. Start VoiceSignal.
2. Say "Contacts." VoiceSignal prompts you to "Say the
name."
3. Speak clearly and say the name of a person in your
contact list, first name followed by last name. For
example, say "John Smith."
If VoiceSignal recognizes the name, it displays the
contact information stored for that name. If it is not sure
which name you said, VoiceSignal displays a choice list
of up to three names and prompts you with "Did you
say?" followed by the first name on the list.
Section 3
4. Say "Yes" to confirm the name or "No" to hear the next
name, or use the keypad to select the correct name from
the list. (See the section, "Using Choice Lists" for more
information.)
42
Voice Signal Options
VoiceSignal displays the contact information stored for
the name you selected.
Using Choice Lists
VoiceSignal uses choice lists when it is not confident it
has correctly recognized a name or number. In this case,
it can display a list of up to three possible choices, and
prompt you to confirm the correct one.
You can change the way that VoiceSignal uses choice
lists with name dialing, digit dialing, and contacts. For
each feature, you can choose to always see a choice list
(even if there is only one choice), or never see a choice
list (even if there are multiple choices). If you leave the
setting at "Automatic," VoiceSignal displays a choice list
only when it is not confident it has correctly recognized
the name or number.
To change the way VoiceSignal uses choice lists:
1. Start VoiceSignal.
2. Press Settings, and then select Choice Lists.
3. Select Name Dialing, Digit Dialing, or Contacts.
4. Click the button for the choice list you want:
Section 3
Section 3: Call Functions
43
• Automatic - VoiceSignal displays a choice list only when it is
not sure if it has correctly recognized the name or number.
• Always On - VoiceSignal always displays a choice list, even
when there is only one choice.
• Always Off - VoiceSignal never displays a choice list.
5. Press OK to accept the new setting.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in
your Contacts list. See page 63 for information on
creating a Contacts list.
1. Press and hold
for two seconds.
Section 3
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the speakerphone--if it is enabled.
located on the
side of your phone. You must enable the speakerphone option
before you access the VoiceSignal options.
Note: To activate the speakerphone option, press the
44
Voice Signal Options
3. Say “Voice Dial” at a distance of 3-12 inches from the
phone in a natural voice.
4. “Say the Name or Number” plays through the earpiece.
5. To use Name Dialing, say the name of the contact that
you want to dial.
6. The name that you said is repeated through the earpiece
and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as Voice
Signal displays the results. Say “Yes” or “No” to confirm
or reject the number when prompted.
9. The location is repeated through the earpiece and your
phone dials the number.
Contacts
To perform a name lookup, you’ll need to have some
entries in your Contacts list.
1. Press and hold
for two seconds.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Contacts” at a distance of 3-12 inches from the
microphone. “Say the name” plays through the
earpiece.
5. The contact name appears in the display with other
information that you’ve entered for that contact.
Section 3: Call Functions
45
Section 3
4. Say the name exactly as it is displayed in your Contacts
list, first name followed by last name.
Status
Status lets you say a single command "Status" to check
your phone's network coverage, signal strength, battery,
GPS setting, and master volume.
Missed Calls
Section 3
Missed Calls lets you say a single command "Missed
Calls"and view your missed calls log.
46
Section 4: Menu Navigation
Section 4
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your
phone. It also includes an outline of all the available
menus associated with your phone.
Section 4: Menu Navigation
47
Section 4
Menu Navigation
Access menus using the navigation keys, two soft keys
, or use a shortcut.
1. In Standby Mode press the
Menu. The first of
several menus appear in the display.
2. Use the navigation keys to browse phone menus.
3. Press
to enter the menu or sub menu presently
appearing in the display.
Return to the Previous Menu
Press
to return to the previous menu.
Navigate Using Shortcuts
You can also access menus and sub menus using menu
numbers. This method is often called a “shortcut.” To
shortcut to a menu or sub menu, press
Menu, then
enter the menu and/or sub menu number(s) for the
feature in question.
1. In Standby Mode, press
is launched.
Menu. The Contacts menu
2. Press the number of the menu, sub menu, and so on to
arrive at the desired feature.
Navigation Key Shortcuts
In Standby Mode, press a navigation key (as illustrated
below) to launch its corresponding application.
48
Menu Navigation
Section 4
The Short Cut menu can be customized. In Standby
Mode, press the
Menu, use the right navigation key to
highlight
Settings & Tools. Press
System
Short
Cut Key. The short cut key list displays. Use the
navigation key to change the setting and press
to save
your selection.
The In-Use Option
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to
standby mode.
1. While in a call, press the right soft key
Options. The
following menu items appear in the display.
• Send Message: Opens the New TXT Message screen.
• Contacts: Open the contacts to view.
• Recent Calls: Display your recent incoming, missed and
outgoing calls.
• Send DTMF: Sends keypad tones.
Section 4: Menu Navigation
49
Section 4
• Voice Privacy: Prevent recipients of your calls from seeing
your number on their display. Select from standard or
enhanced options.
• Voice Memo: Record a voice memo.
2. Use the navigation key to highlight a menu. Press
to
open the highlighted menu or to activate the feature.
Menu Outline
Use the menu shortcuts on the following pages to quickly
access sub menus. Press the
key to access Menu, then
use the navigation keys to highlight the menu. right of the
menu to jump to that menu, sub menu, or feature.
CONTACTS
1: New Contact
2: Contact List
3: Groups
1: No Group
2: Business
3: Colleague
4: Family
5: Friends
4: Speed Dials
GET IT NOW
1: Get Tunes & Tones
1: Get New
2: Record New
3: Beep Once
4: VZW Default Tone
5: Bell 1
6: Bell 2
7: Melody 1
50
Menu Outline
Section 4
8: Melody 2
9: Melody 3
10: Melody 4
11: Melody 5
12: Melody 6
13: Melody 7
2: Get Fun & Games
1: Get New
3: Get Pix
1: Take PIX
2: PIX Gallery
3: PIX Place
4: PIX Services
4: Get News & Info
5: Get Going
1: Get New
MESSAGING
1: New TXT Msg
2: New PIX Msg
3: New Hand.Msg
4: Inbox
5: Sent
6: Drafts
7: Voicemail
8: E-Mail
9: Mobile IM
RECENT CALLS
1: Missed
2: Received
3: Dialed
4: All
5: View Timers
Section 4: Menu Navigation
51
SETTINGS & TOOLS
Section 4
1: Tools
1: Calendar
2: Alarm Clock
3: World Clock
4: Notepad
5: Calculator
6: Voice Services
1: Launch V.Command
2: Voice Memo
3: TTS
4: Voice Settings
2: Sounds
1: Master Volume
2: Call Sounds
3: Alert Sounds
4: Keypad Volume
5: Earpiece Volume
6: Service Alerts
7: Power On/Off
3: Display
1: Banner
2: Backlight
3: Contrast
4: Wallpaper
5: Display Themes
6: Power On/Off Animation
4: System
1: System Select
2: NAM Selection
3: Device Info
4: Location
5: Security
6: Language
52
Menu Outline
Section 4
7: Short Cut Key
8: Standalone Mode
5: Call Settings
1: Answer Options
2: Auto Retry
3: TTY Mode
4: One Touch Dial
5: Voice Privacy
6: Data Settings
7: DTMF Tones
6: Clock Format
1: Main Clock
2: Front Clock
7: Ringer ID
8: Picture ID
Section 4: Menu Navigation
53
54
Section 4
Section 5: Entering Text
Topics Covered
• Changing the Text Entry Mode
• Using Word Mode
• Entering Upper and Lower Case
• Entering Symbols
Section 5
• Entering Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the amount of key strokes
associated with entering text.
Section 5: Entering Text
55
Changing the Text Entry Mode
1. In standby mode, press the key
Menu, then press
the left navigation key to Messaging, press
New
TXT Msg to compose a new text message. Or press the
left soft key
Message and press
New TXT Msg.
2. Enter the phone number of the recipient, or press the
right soft key
Options to display a pop-up menu with
the options listed
• Entry Mode: Choose the method of text entry. Choose from
Section 5
•
•
•
•
•
Word
Abc
ABC
123
Symbols
• Save As Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period of
time.
• Deferred Delivery: Save the message to be delivered at the
assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
3. Press the left soft key
options:
Add to access the following
• Contacts: Launches the Contacts menu.
• Recent Calls: Lists all recent calls-dialed, received, or
missed.
56
Using Word Mode
Using Word Mode
Word recognizes the most commonly used word for any
sequence of key presses and inserts that word into your
message. It’s much faster than the traditional method of
text entry (Abc) and requires only one key press per letter
of the word that you’re spelling.
1. In Standby Mode, press the left soft key
Message,
then press
New TXT Msg to compose a new text
message.
3. Press the left soft key
Abc to display a pop-up menu
containing text entry mode options.
4. ABC is highlighted. Use the up/down navigation keys to
display Word, then press
.
Now, for practice, enter the word “Samsung” into your
message by pressing each of the following keys only
once:
,
S
,
A
,
M
,
S
,
U
,
N
G
Word recognizes that the most frequently used word for
the sequence that you just entered is “Samsung.” If more
than one word shares the same sequence, Word provides
the most common of the two. Press
to display other
words in the dictionary, if available.
Entering Upper and Lower Case
Section 5: Entering Text
57
Section 5
2. Enter the phone number or email address of the
recipient, then press the down navigation key to move to
the Text field.
• Enter characters while in ABC mode by pressing the key that
contains the desired characters
for “H”.
• Press the key repeatedly to cycle through other available
characters for that key.
• Pause briefly when the desired character appears in the display
to accept the character and therefore insert it into the
message.
• Press
to enter a space.
• To cycle between uppercase, lower case, and initial caps for
Section 5
characters in ABC mode, briefly press
.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or%
into a text message.
1. In Standby Mode, press the left soft key
Message,
New TXT Msg to compose a new text message.
2. Enter the phone number of the recipient, then press the
down navigation key to enter text.
3. Press the left soft key
Abc to display a pop-up menu
containing the following options.
• Word: Choose from the factory provided words or add to
your personal dictionary.
• Abc: Enter text with initial capitalization at the beginning of
each sentence.
• ABC: Enter text in all capital letters.
• 123: Enter numbers.
• Symbols: Allows you to enter symbols.
58
Entering Numbers
4. Abc is highlighted. Use the up/down navigation keys to
display Symbol. The first of four screens containing
symbols appears in the display.
5. Use the navigation left/right keys to page through the
other symbols, if necessary.
6. Enter the key that corresponds with the symbol that you
wish to enter. For example, press
for an exclamation
point (!).
Entering Numbers
Enter numbers into a text message while in number mode
(123). See "Changing the Text Entry Mode" on page 56 for
instructions on changing text entry modes.
• While in 123 mode, press the key containing the number that
you wish to insert into your message.
Section 5: Entering Text
59
Section 5
7. Repeat steps 5 through 6 to insert as many symbols into
your message as desired.
60
Section 5
Section 6: Understanding Your Contacts
Topics Covered
• Opening Contacts Menu
• Adding a Contact
• Adding Pauses
• Contact Groups
• Finding a Contact Entry
• Editing an Existing Contact Entry
• Deleting a Contact Entry
• Storing Numbers After a Call
• Speed Dialing
• Finding My Phone Number
Section 6: Understanding Your Contacts
61
Section 6
This section allows you to manage your daily contacts by
storing their name and number in your Contacts menu.
Contact entries can be sorted by name, entry, or group.
Opening Contacts Menu
The Contacts menu provides access to powerful features
such as adding Groups, creating and sending V-cards,
and viewing the phone number assigned to your phone
by Verizon Wireless.
1. In standby mode, press
Menu. The Contacts menu
displays.
• New Contact: Add a number, e-mail, or web address to your
Contacts.
• Contact List: Find a phone number by Name, by Entry, or by
Group.
• Groups: Add new or rename one of your five default groups.
• Speed Dials: Set a speed dial for a contact.
2. Use the navigation key to highlight the Contacts submenu of your choice, then press
.
Section 6
Contacts Icons
You can assign multiple entries to a contact. The icons in
the following table represent all available entry types
Mobile 1 icon. Enter a mobile number for the entry in this
field.
Home icon. Enter a home number for the entry in this
field.
Work icon. Enter the work number for the entry in this
field.
E-mail 1 icon. Enter an e-mail address for the entry in this
field.
62
Adding a Contact
Group icon. Select an available group to associate with
the entry in this field.
PIX icon. Select a PIX (graphic or photo) to assign to the
contact entry.
Ringtone icon. Select a ringtone to associate with the
entry in this field.
Mobile 2 icon. Enter a mobile number for the entry in this
field.
Fax icon. Enter a fax number for the entry in this field.
E-mail 2 icon. Enter an e-mail address for the entry in this
field.
Adding a Contact
When you add information to your Contacts, you can add
it as a new entry or as an existing entry.
Method 1
2. Press
Menu, the Contacts menu
New Contact to enter the contact information.
3. Enter a name for the entry using the keypad.
4. Use the navigation key to highlight the appropriate type
(Mobile, Home, Work, E-mail, etc.). Once highlighted,
use the keypad to enter required information.
5. Use the navigation key to highlight other type fields, if
desired. Enter information using the keypad.
6. When you’re finished entering information for the entry,
press
Save to save the entry to your Contacts.
Section 6: Understanding Your Contacts
63
Section 6
1. In standby mode, press
opens.
Method 2
You can add new numbers to the Contacts by simply
entering the number while the phone is in standby mode,
then following the necessary prompts to complete the
process.
1. In standby mode, enter the number that you wish to save
using the keypad, then press the left soft key
Save.
You’re prompted to select from Create New or Update
Existing.
2. Press
to enter the number as a Create New, or press
to append the number to Update Existing.
3. If you selected Create New, the following types are
available.
•
Section 6
•
•
•
•
Mobile 1
Mobile 2
Home
Work
Fax
4. If you selected Update Existing, proceed to step 8.
5. Use the up/down navigation keys to display the desired
type, then press the
key.
6. Enter a name for the entry using the keypad. Press the
left soft key
Abc if you wish to select a different
method of text entry, such as Word, Abc, ABC, 123, or
Symbols.
64
Adding Pauses
7. When you’re finished entering information for the entry,
press
Save. The entry is saved to your Contacts. If
you selected Update Existing, the Contact List opens in
Search mode. Use the navigation key to browse through
entries, or enter the name of the entry using the keypad.
8. Once you’ve highlighted the entry you wish to append
the number, press
. An Update Existing pop-up
screen with the new information displays. Press the
key. The number is appended to the selected entry and
saved to your Contacts.
Adding Pauses
Calls to automated systems often require a password or
account number. Instead of manually entering numbers
each time, store the numbers to your Contacts along with
special characters called pauses.
• Pause: A hard pause stops the calling sequence until further
input from you.
seconds and then automatically sends the remaining digits.
Note: Entering multiple two-second pauses extends the length of a pause.
For example, two consecutive two-second pauses cause a total pause
time of four seconds. Keep in mind pauses count as digits towards the 48digit maximum.
Contacts Groups
You can place any Contacts entry into one of five
categories, called “Groups.” Groups allow you to search
your Contacts faster, quickly send messages to one or
more group members, and more.
Section 6: Understanding Your Contacts
65
Section 6
• Wait: A two-second pause stops the calling sequence for two
Note: By default, new entries to your Contacts are placed into the No Group
unless another group is specified.
View Groups
1. In standby mode, press the key
Menu, then press
Groups. The following groups appear in the display.
• No Group
• Business
• Colleague
• Family
• Friends
2. Use the navigation key to highlight the desired group,
then press
to access the group and view its
contents.
Move an Entry to Another Group
Section 6
1. In standby mode, press the right soft key
Contacts.
Use the navigation key to highlight the contact you wish
to move.
2. Press the left soft key
Edit. Use the up/down
navigation key to scroll to the Group option.
3. Press the left soft key
groups:
•
•
•
•
•
66
No Group
Business
Colleague
Family
Friends
Set. Choose from the following
Contacts Groups
4. Use the navigation key to highlight the group containing
the entry that you wish to move, then press
.
5. Press
Save. The selection has been saved to the
designated group.
Create a New Group
In addition to the five groups already in your phone, you
can create additional groups (a maximum of 30). New
groups can be named anything you like as long as their
names are within the 32-character limit.
1. In standby mode, press
Menu, then press
Groups. Your existing groups appear in the display.
2. Press the left soft key
New. A New Group pop-up
menu displays with the “Enter new name” highlighted.
SAVE to save. The Groups list now displays the
3. Press
new group added.
Send a Text Message to Members of a Group
Note: Text messaging availability varies when roaming off the Verizon
Wireless Network.
1. In standby mode, press
Menu, then press
Groups. Your existing groups appear in the display.
2. Press the right soft key
TXT Msg. Press
.
Options and highlight Send
Section 6: Understanding Your Contacts
67
Section 6
Use Send Message in the Group feature to send a message
to as many as 10 members of a group at once.
3. Use the down navigation key to highlight the contacts in
the group to which you want to send a message and
press
to select the contact.
4. Press the left soft key
Done.
Note: You can mark up to 10 members of a group for message distribution.
If you try and mark an 11th member, you’ll be notified that 10 addresses
have already been selected.
5. Press the right soft key
Options.
6. Press
. A pop-up menu appears in the display with
Text highlighted.
7. Enter the content of your message using the keypad.
8. To send the text message, press
Send.
Send a PIX Msg to Members of a Group
Section 6
Note: Only available within Verizon Wireless Enhanced Services Area.
1. Follow steps 1 through 4 in the previous section entitled
“Send a Text Message to Members of a Group” .
2. With Text Msg and PIX Msg appearing in the pop-up
menu, use the navigation key to highlight PIX Msg, then
press
.
3. The list of addresses (or numbers) to which the message
will be delivered appears in the display.
4. Press
. The Create PIX Msg composer appears in the
display with the options:
• To: Enter the addresses (or numbers to which the message
will be delivered.
68
Finding a Contacts Entry
•
•
•
•
Text: Add text to the PIX Msg.
PIX: Add an image from the PIX Gallery to the message.
Sound: Add sound to the PIX Msg
Subject: Add a subject to the PIX Msg.
5. Once you’ve finished adding the desired content to your
PIX Msg, you’re returned to the PIX Msg composer.
6. Press
Send to send the PIX Msg. The PIX Msg is sent
to the intended recipients.
Finding a Contacts Entry
From standby mode, you can quickly open the Contacts
list. Contacts is a quick way of viewing entries you’ve
stored in the Contacts list.
1. In standby mode, press the right soft key
The Contact List displays.
Contacts.
2. In the Search field, enter the first and second letters of
the name you wish to search until it is highlighted.
Section 6
Editing an Existing Contact List Entry
1. In standby mode, press the
Contact List.
Menu, then press
2. Use the navigation key to display the contact list entry
and press the left soft key
Edit.
3. Use the navigation key to highlight the name, number, email address, or other field that you wish to edit.
4. Press
to backspace and delete numbers, text, or
symbols.
Section 6: Understanding Your Contacts
69
5. Press and hold
highlighted field.
to erase all numbers in the
6. Use the keypad to re-enter numbers, text, or symbols.
7. When you’re finished editing the entry, press
Your changes are saved.
SAVE.
Deleting a Contact Entry
1. In standby mode, press the
Contact List.
Menu, then press
2. Use the navigation key to display the contact list entry
and press the
View key.
3. Press the left soft key
Erase.
4. A pop-up “Erase Entry?” screen displays.
5. Highlight Yes or No, then press
.
Section 6
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of
the caller to your Contact List.
Note: If the call was incoming and Caller ID information was unavailable,
then the store option is also unavailable.
1. After you press
to end your call, the call time, length
of call and phone number appears in the display.
2. Press the right soft key
Save. You’re prompted to
confirm this as a Create New, or Update Existing.
3. Follow the on-screen prompts to designate other
information.
70
Speed Dialing
Store a number in standby mode
Store a phone number by entering the number in standby
mode, then press
Save. Follow the screen prompts to
assign number types and other information.
Speed Dialing
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers
stored in your Contact List quicker.
Speed dialing allows you to press and hold a key (or keys)
to dial the number associated with those key(s). There are
three types of speed dialing; 1-touch, 2-touch, and 3-touch
dialing.
Note:
is reserved for voicemail.
1-touch dialing
2-touch dialing
Call phone numbers assigned to keys 010 through 099 by
briefly pressing the first key, then pressing and holding
the second key. For example, to speed dial the number
assigned to 013, briefly press
, then press and hold
until the number dials.
Section 6: Understanding Your Contacts
71
Section 6
Call phone numbers assigned to memory locations 002 009 by pressing and holding the any of the 2 - 9 keys. For
example, to speed dial the number assigned to location 2,
press and hold
until the name and number appear in
the display and the number is dialed.
3-touch dialing
Call phone numbers assigned to memory locations 100
through 500 by briefly pressing the first and second keys,
then pressing and holding the third key. For example, to
dial location number 113, briefly press , , then press
and hold
until the number dials.
Assign a speed dial location
1. In standby mode, press the
Menu, then press
Speed Dials. The Speed Dials screen displays with the
first available number highlighted.
2. Use the navigation keys to highlight the number you wish
to assign or enter the speed dial location using the
keypad, press the
Set key.
3. The Set Speed Dial screen displays.
4. Use the navigation keys to highlight the entry you want,
then press
.
Section 6
5. At the pop-up screen, use the navigation key to highlight
Yes or No and press
.
6. Continue to assign speed dial entries or press the
key to return to standby mode.
Finding My Phone Number
My phone # displays the ten-digit number assigned to
your phone.
1. In standby mode, press the
Menu, then press the
right navigation key to Settings & Tools.
2. Press the
72
System key.
Finding My Phone Number
3. Press the
Device Info key. The My Number field is
highlighted. Press
. The mobile device and
identification number are displayed.
Section 6
Section 6: Understanding Your Contacts
73
74
Section 6
Section 7: Messaging
Topics Covered
• Types of Messages
• Message Folders
• Sending PIX Messages
• Receiving a PIX Messages
• Retrieving a PIX Msg
• Retrieving New Messages
• Voicemail
• Creating and Sending Messages
• Mobile IM
This section allows you to send or receive different types
of messages. It also includes the features and functionality
associated with messaging.
Section 7
Section 7: Messaging
75
Types of Messages
Your phone is capable of sending email and text messages.
Send email or text messages by simply entering the email
address or the phone number of the recipient in the To:
<.........> or Send To field when creating a new message.
Message Folders
Your phone provides default message folders for your
Inbox, Sent, Draft, Voicemail, E-mail messages.
Sending PIX Messages
Note: Only available within Verizon Wireless Enhanced Services Area.
You can add sounds and attach a Contact entry to your PIX
Msg. This is also known as Multimedia
Messaging (MMS).
1. In standby mode, press the left soft key
Message
then press
New PIX Msg. Or in standby mode, press
the
Menu key and use the left navigation key to
highlight Messaging then press
New PIX Msg.
2. Enter the phone number or e-mail address of the
recipient (or recipients) using the keypad.
Options to display a pop-up
3. Press the right soft key
menu that provides the following options:
Section 7
• Entry Mode: Choose from Word, Abc, ABC, 123, and
Symbols modes of text entry.
• Preview: Shows the message before it is sent.
• Save as Draft: Save the message to your Draft folder.
76
Sending PIX Messages
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at
the assigned delivery date and time.
• Remove PIX: Removes the selected PIX from the message.
• Remove Sound: Removes the sound attached from the
message.
4. Press the left soft key
Add to select from the following
options:
• Contacts: Choose a number from your contacts list or select
the right soft key to select from the Groups menu.
• Recent Calls: Choose a number from the recent calls list.
• To PIX Place: Send the message to the PIX Place.
5. Press
once you’ve finished entering the number.
6. Press the down navigation key to add a message.
Compose your message, then press the down navigation
key. PIX is highlighted.
7. Press the left soft key
.
Gallery to add a PIX. Press
8. Use the down navigation key to the Sound field, press
the left soft key
Sounds to select a sound. Press
.
10. Once all fields are complete, press
to send the
message to the intended recipient(s).
Section 7: Messaging
77
Section 7
9. Press the down navigation key to the Subject field press
the left soft key
Abc to change entry mode. Press the
Options to Add Quick Text. Press
.
right soft key
Receiving a PIX Message
When you receive a message in standby mode, the
message ringer sounds, (unless turned off), and a popup
message appears in the display.
1. At the “DOWNLOAD COMPLETED, PLAY NOW?” prompt,
use the navigation keys to highlight Yes or No. Press
.
2. Press the right soft key
following options:
•
•
•
•
•
•
Options to choose from the
Play Again: Replays the PIX message.
Forward: Forwards the message to another recipient.
Erase: Pop-up prompts with Yes or No for deletion.
Save PIX: Saves the picture to the PIX Gallery.
Save Sound: Saves the picture to the PIX Gallery.
Save Quick Text: Saves the text sent in the message to the
Quick Text list.
• Add To Contacts: Adds the sender’s information to your
contact list.
• Lock/Unlock: Locks the message to prevent deletion.
• Message Info: Provides the following information: TO
Number, Priority, Msg Type, Size and if a Graphic, or Sound
were included in the message.
Section 7
Receive Messages While in a Call
When you receive a message while in a call, the New
Message dialog box appears in the display along with the
closed envelope icon ( ). You can view the message
without disconnecting your call.
78
Receiving a PIX Message
View a PIX Msg Later
Note: Only available within Verizon Wireless Enhanced Services Area.
Note: When Auto Receive is set to Off in Message Settings, the message
“View Later” displays.
1. In standby mode, press the left soft key
then press
Inbox.
Message
2. To view the message, press the left soft key
Message,
Inbox.
3. Highlight the message and press
Open.
• Press left soft key
Erase to delete the message.
Later to download and view the
• Press the right soft key
message later.
• Press
Down to begin downloading the PIX message.
4. Press
to return to standby mode.
Inbox
Received messages of all types are stored in the Inbox
folder.
1. In standby mode, press the left soft key
Message
then press
Inbox. Or in standby mode, press the
Menu key and use the left navigation key to
highlight Messaging then press
Inbox.
3. Press
Open to view contents of the highlighted
message.
Section 7: Messaging
79
Section 7
2. Use the navigation key to highlight the message that you
wish to view.
4. While viewing a message press the right soft key
Options to display the options listed.
Play Again: Replays the PIX message.
Forward: Forward the message to another recipient.
Erase: Pop-up prompts with Yes or No for deletion.
Save Graphic: Saves the picture to the PIX Gallery.
Save PIX will display if you are viewing a PIX message.
• Save Sound: Saves the picture to the PIX Gallery.
• Save Quick Text: Saves the text sent in the message to the
•
•
•
•
Quick Text list.
• Add To Contacts: Adds the sender’s information to your
contact list.
• Lock/Unlock: Locks the message to prevent deletion.
• Message Info: Provides the following information: TO
Number, Priority, Msg Type, Size and if a Graphic,or Sound
were included in the message.
5. Press
Reply key to return a message to the sender.
6. From the Inbox menu, press the left soft key
Erase
to delete the message from the Inbox. Highlight Yes to
delete, or No to return to the Inbox menu.
Sent
Section 7
Your phone stores messages in the Sent folder, regardless
of whether the message was successfully transmitted.
Verify if and when a message or e-mail was successfully
transmitted by enabling the Enh. Delivery Ack. feature.
Review Messages in the Sent Folder
1. In standby mode, press the left soft key
Message
then press
Sent. Or in standby mode, press the
Menu key and use the left navigation key to highlight
80
Receiving a PIX Message
Messaging then press
Sent.
2. Use the navigation key to highlight the message that you
wish to review, then press
OK.
3. While viewing the message, press the right soft key
Options to display the options listed.
•
•
•
•
•
Forward: Forwards the message to another recipient.
Play Again: Replays the PIX message.
Resend: Resends the message to the original recipient.
Erase: Erases the selected message.
Add To Contacts: Adds the sender’s information to your
contact list.
• Lock/Unlock: Locks the message to prevent deletion.
• Save Quick Text: Saves text to the choose from Quick Text
message list.
• Message Info: Provides the following information: TO
Number, Day, Date, Time, Delivery Type, Msg Type, Priority,
Size and if a Graphic, and Sound.
4. Use the navigation key to highlight the desired option.
5. Press
option.
to perform the function for the highlighted
6. From the SENT menu, press the left soft key
Erase
to delete the message from the SENT folder. Highlight
Yes to delete, or No to return to the SENT menu.
Drafts
Section 7: Messaging
81
Section 7
Draft messages are those that have been composed but
never sent. You can return to the Drafts folder at any time
to view, edit, or send a draft message.
Create a Draft Text Message
1. In standby mode, press the left soft key
Message
then press
New TXT Msg. Or in standby mode, press
the
Menu key and use the left navigation key to
highlight Messaging then press
New TXT Msg.
Press
.
2. Enter the phone number of the recipient, then press the
down navigation key.
3. Compose your message using the keypad, then press
the right soft key
Options. A pop-up menu appears
in the display.
4. Scroll down with the navigation key until Save As Draft
is highlighted, then press
. A confirmation message
appears in the display and your message is saved to the
Drafts folder.
View and Edit Draft Messages
1. In standby mode, press the left soft key
Message
then press
Drafts. Or in standby mode, press the
Menu key and use the left navigation key to
highlight Messaging then press
Drafts.
2. Use the navigation key to highlight the message that you
wish to view, then press
Edit. The message opens in
the Text field with the message text displayed.
Section 7
3. Press the CLR key
to backspace and delete any
current characters in the display, if desired. Press and
hold
to erase a word at a time.
4. Press
82
. The Text field is highlighted.
Retrieving New Messages
5. Press the right soft key
Options. A pop-up menu
appears in the display with the options listed.
• Add: Add information from the following categories.
• Graphics: Adds a graphic that is preloaded or downloaded.
• Animation: Adds an animation that is preloaded or
downloaded.
• Sound: Adds a sound that is preloaded.
• Quick Text: Choose from up to 12 pre-loaded messages.
• Text Format: Choose the Size, Alignment, and Style of the
text displayed in your message.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at the
assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
6. Use the navigation key to highlight the desired option.
Press
to perform the function for the highlighted
option.
7. Once you’ve returned to the message composer, press
to send the message, if desired.
Retrieving New Messages
Section 7: Messaging
83
Section 7
While text messages from other phones are delivered
directly to your phone, PIX messages and Emails will be
stored in the Inbox of the message server and the server
will alert you to new messages. Therefore you need to
retrieve new messages from your phone.
Retrieving a Text Message
When you receive a message in standby mode, the
message ringer sounds, (unless turned off), and New Text
Msg appears in the display along with the closed
envelope icon ( ). The date and time of the message also
appear in the display.
1. Press the
key to View now, or press the down
navigation key to highlight View later and press the
key. The message is saved to your inbox where you can
view it later.
2. Press the right soft key
Options to open the
message, where you have the option to Forward, Erase,
Save Graphic, Save Sound, Save Quick Text, Add To
Contacts, Lock and Message Info.
3. Press the
sender.
REPLY key to return a message to the
Section 7
Voicemail
New voicemail alerts are sent via an SMS text message.
These messages indicate how many new and urgent
voicemail are in your box. When all voicemail has been
listened to, a message is sent notifying you there are zero
new messages waiting. Open the text message to view the
number of new and urgent voice messages in your
voicemail box. If a caller leaves a callback number, this
number will also be sent via an SMS text message.
84
Creating and Sending New Messages
Receive Voicemail Messages
When you receive a new voicemail message you’ll hear a
sound and an SMS text message appears in the display.
1. Press the up/down navigation keys to select Listen Now
or Listen Later.
2. Press the
key.
View Voicemail Messages in the Inbox Folder
1. In standby mode, press the key
Menu, then press
the left navigation key to Messaging, press
Voicemail. Or press the left soft key
Message and
press
Voicemail.
2. Press
OPEN to dial voicemail and retrieve your
message(s).
Creating and Sending New Messages
This section guides you through the procedure to send
various types of messages.
Creating and Sending Text messages
1. In standby mode, press the key
Menu, then press
the left navigation key to Messaging, press
New
TXT Msg to compose a new text message. Or press the
left soft key
Message and press
New TXT Msg.
• Entry Mode: Choose from Word, Abc, ABC, 123, and
Symbols modes of text entry.
• Save as Draft: Save the message to your Draft folder.
Section 7: Messaging
85
Section 7
2. Enter the phone number of the recipient, or press the
right soft key
Options to display a pop-up menu
with the options listed
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at
the assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
3. After selecting or entering your recipients in the To field,
use the down navigation key to move to the message
composer.
• Press the right soft key
Options. Press
Add to
acess the following options:
• Graphics: Adds a graphic that is preloaded or downloaded.
• Animation: Adds an animation that is preloaded or
downloaded.
• Sound: Adds a sound that is preloaded.
• Quick Text: Choose from up to 12 pre-loaded messages.
4. Use the navigation key to highlight an option. Press
to perform the function for the option, or to enter its
sub menu.
5. To send the message, press
.
Creating and Sending PIX Messages
Section 7
1. In standby mode, press the key
Menu, then press
the left navigation key to Messaging, then press
New PIX Msg to compose a new message. Or press the
left soft key
Message and press
New PIX Msg.
86
Creating and Sending New Messages
2. Enter the phone number of the recipient, or press the
right soft key
Options to display a pop-up menu with
the options listed:
• Entry Mode: Choose from Word, Abc, ABC, 123, Symbols
and Shortcuts modes of text entry.
• Preview: Shows a preview of the message created.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at the
assigned delivery date and time.
• Remove PIX: Erases the attached picture or movie.
• Remove Sound: Erases the attached sound.
3. After selecting or entering your recipients in the To field,
use the down navigation key to move to the Text field.
4. Compose your message using the keypad.
5. Use the down navigation key to move to the PIX field.
Press the left soft key
Gallery.
6. Highlight the picture and press the
key.
7. Use the down navigation key to move to the Sound,
Subject. Enter information if desired.
8. To send the message, press
SEND.
Section 7
Section 7: Messaging
87
Mobile IM
The Instant Messaging function allows you to send and
receive instant messages using one of the following
communities:
• AOL® Instant Messenger TM
• MSN® Messenger Service
• Yahoo!® Messenger
Note: You must first create the Instant Message account before accessing
it on your phone.
Using Mobile IM
1. In standby mode, press the left soft key
2. Highlight Mobile IM and press
Message.
.
3. Select your instant message community using the left
and right navigation keys and press
.
Section 7
4. Use the on-screen application specific functions and
options to use the instant message applications.
88
Section 8: Changing Your Settings
Section 8
Topics Covered
• Display Settings
• Shortcut
• Security Settings
• Voice Privacy
• Ringer Settings
• Location Settings
• Changing Message Settings
• Call Settings
• Resetting Your Phone
This section explains the sound and phone settings for
your phone. It includes display settings, security settings,
call settings, and other settings associated with your
phone.
Section 8: Changing Your Settings
89
Section 8
Display Settings
The Display sub menu affects the menu style, standby
mode animation, backlight settings, and more.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Display. The Display sub menus listed in the display
• Banner: Create your own personalized greeting that appears
•
•
•
•
•
in the display when your phone is in standby mode or choose
the ERI Banner which displays the network in which you have
subscribed.
Backlight: Choose settings for the LCD, Keypad, and Power
Save.
Contrast: Choose the contrast settings for the Main LCD and
the Front LCD. Press
to save changes.
Wallpaper: Choose PIX (Pre-loaded or personal) to use as
the background display for your Main LCD. You may only
choose from your personal PIX or pre-loaded PIX for the Front
LCD.
Display Themes: Choose from 6 preset colors used for
menu display.
Power On/Off Animation: Choose the media that appears
in the display when you turn the phone on and off.
2. Use the navigation key to highlight the display sub menu
that you wish to edit, then press
.
3. Use the navigation key to select from the sub menu
options that appear in the display, then press
. Your
settings are saved.
90
Display Settings
Banner
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Display. The Display sub menus listed in the display.
Press
Banner.
2. Press
Note: Press and hold
to create a Personal Banner for your handset.
to erase an existing banner, if necessary.
3. Enter a word or short phrase (12 characters or less) to
appear in your phone’s display when the phone is in
standby mode.
4. Press
to save the new banner.
5. Highlight ERI Banner to turn On or Off the Enhanced
Recognition Indicator (ERI) banner.
Backlight
Set the backlight for the display or keypad to remain on for
a specified period of time or to remain on as long as the flip
is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Display. The Display sub menus listed in the display.
Press
Backlight.
Section 8: Changing Your Settings
91
Section 8
Banner allows you to create your own personalized
greeting that appears in the display while your phone is
in standby mode.
2. LCD is highlighted. Press
or use the navigation key
to highlight a Keypad press
.
Section 8
•
•
•
•
Always On: The backlight is always on.
Always Off: The backlight is always off.
5 Seconds: The backlight is on for 5 seconds before it dims.
15 Seconds: The backlight is on for 15 seconds before it
dims.
• 30 Seconds: The backlight is on for 30 seconds before it
dims.
3. Press
to enter the highlighted option’s sub menu and
change settings as desired.
Contrast
Choose the contrast settings for the Main LCD and Front
LCD displays on your handset.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Display. The Display sub menus listed in the display.
Press
Contrast.
2. Main LCD is highlighted. Press
. Use the right and
left navigation keys to increase or decrease the contrast.
Press
.
3. Use the same procedures for the Front LCD.
Wallpaper
Choose the wallpaper displayed on your handset from
the PIX Gallery or pre-loaded PIX.
Choose the Wallpaper
1. In standby mode, press the
navigation key to highlight
92
Menu, use the right
Settings & Tools. Press
Display Settings
Display. The Display sub menus listed in the display.
Press
Wallpaper.
3. If you selected PIX Gallery, choose from the available
pictures in the PIX Gallery. If you selected Pre-loaded
PIX, choose from available wallpaper and press
.
Display Themes
Choose from 6 preset colors (Default, Business, Tropical,
Blue, Green, or Red) used for menu display. Use the up or
down navigation keys to highlight your selection and
press
.
Power On/Off Animation
Animation allows you to choose the multi-media or
pictures that appear in your phone’s display when you
turn it on, turn it off, and while the phone is in standby
mode.
Choose Power On or Power Off Animation
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Display. The Display sub menus listed in the display.
Press
Power On/Off Animation.
2. Use the navigation key to highlight Power On (or Power
Off), then press
.
Section 8: Changing Your Settings
93
Section 8
2. Use the navigation key to highlight PIX Gallery or Preloaded PIX, then press
.
Section 8
Short Cut Key
Shortcut List allows you to select from up to eleven
applications that appear in the display when you press the
up navigation key in standby mode.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the
display. Press
Short Cut Key. The sub menus listed
appear in the display.
2. A list of sub menus appears in the display, use the
navigation key to highlight the desired sub menu, then
press
. The shortcut is added to the list.
Security Settings
The Security sub menu allows you to lock your phone, set
up emergency numbers, enable or disable voice privacy,
set restrictions, and other security options.
1. In standby mode, press the
navigation key to highlight
System.
Menu, use the right
Settings & Tools. Press
2. Use the navigation key to highlight Security, press
.
3. Enter the lock code (factory settings are the last four
digits of your telephone number). The following options
display:
• Common Code: Common code On uses a common
password for both device and location lock code. Common
code Off uses separate passwords for both device and location.
• Call Restrictions: Allows you to restrict the Outgoing,
Incoming, or Contacts list for your phone.
94
Security Settings
Lock Phone
Lock Phone restricts the use of your phone with the
exception of outgoing calls to 911 and the three userprogrammed emergency numbers. Lock Phone allows
you to answer calls, but to place calls (except to emergency
numbers) you have to unlock the phone.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the
Security. You’re prompted to enter the
display. Press
lock code. The default lock code is the last four digits of
your telephone number.
2. Enter the Lock Code. Several security sub menus appear
in the display.
3. Press
Lock Mode. Use the navigation key to
highlight Device or Location. Press the
key. The
following options display.
• Unlock: If locked, unlocks the device or phone, depending on
your selection.
• Lock: Your phone returns to standby mode. The the Lock Code is
required immediately to access any functions.
• On Power Up: The Lock Code is required whenever you
power up the phone.
Section 8: Changing Your Settings
95
Section 8
• Lock Mode: Allows you to lock the Device or Location.
• Edit Code: Allows you to change the Lock Code for the
Device or Phone.
• Reset Phone: All settings (except Contacts) are reset to
factory default settings.
Section 8
4. Press
option.
to perform the function for the highlighted
Change Lock
The default lock code is the last four digits of your phone
number. Change Lock allows you to change this code to a
lock code of your preference.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the
display. Press
Security. You’re prompted to enter the
lock code. The default lock code is the last four digits of
your telephone number.
2. Press
Edit Code. Two options are available Device
and Location. Use the navigation keys to highlight your
choice and press
.
3. At the “Enter New Lock Code” prompt, enter the new
lock code. You’re prompted to confirm the new lock
code.
4. “Device or Location Lock Code Changed” message
appears in the display confirming that your lock code has
been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If you
96
Voice Privacy
call 911 an audible tone is heard and an emergency prompt appears in the
display for the duration of the call.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Call Emergency Numbers in Lock Mode
In Lock Mode, you can dial 911 to place an emergency call.
Note: If you dial 911, your phone dials the emergency number immediately
(no prompt).
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
Voice Privacy when enabled (that is, set to Enhanced), turns
on advanced voice encryption.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Call Settings. The Call Settings sub menus listed in
the display.
2. Press
Voice Privacy. The sub menus listed appear in
the display. Standard and Enhanced appear in the
display.
3. Use the navigation key to highlight the Voice Privacy
option of your choice, then press
. Your settings are
saved.
Section 8: Changing Your Settings
97
Section 8
Important: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Section 8
Restriction
Restriction allows you to restrict outgoing and incoming
calls. You can also restrict access to your Contacts list.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the
display.
2. Press
Security.
3. Enter the lock code, then press
Call Restrictions.
4. Use the navigation key to select Outgoing, Incoming, or
Contacts, then press
.
5. Use the navigation key to highlight On or Off, then press
. Your settings are saved.
Location Settings
Note: This feature is only available on the Verizon Wireless network.
The Location (GPS) setting identifies your location to the
network. You can fully enable this setting or set GPS to
work only in the case that you dial 911 from your phone.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System Settings sub menus listed in
the display.
2. Press
Location. The Location screen displays.
• Location On: GPS location setting is on wherever the feature
is available.
98
Location Settings
• E911 Only: GPS location setting is on whenever you dial 911
only.
4. Press
Section 8
3. Use the navigation key to highlight an option.
to select the highlighted setting.
Device Info
The Device Info sub menu allows you to view the
software and hardware information, your assigned
number, and an icon glossary for your phone.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menu is listed in the
display.
2. Press
Device Info. My Number is highlighted. Press
to display the Mobile Device and Identification
numbers.
3. Press
to view the software, PRL, ERI, Browser, Get it
Now, and Hardware versions available on your phone.
4. Press
to view the list of icons with a brief
description.
5. Press
to return.
Language
Change the display language to English or Español using
the Language sub menu.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the display.
Press
Language.
Section 8: Changing Your Settings
99
Section 8
2. Use the navigation key to select the language of your
choice, then press
.
Changing Message Settings
This menu allows you to define settings for your
messages sent or received on your phone. To access your
message settings, use the following steps:
1. In standby mode, press the
Menu, then press the
left navigation key to Messaging, press the left soft key
Settings. Or press the left soft key
Message
and press the left soft key
Settings.
2. Use the navigation keys to access the following options:
• Auto Save: Saves all messages received or sent. Use the
navigation keys to select On, Off, or Prompt.
• Auto Erase: Erases all messages received or sent. Choose
from On or Off.
• Auto View TXT: Automatically displays the text message
when received. Choose from On or Off.
• Auto Receive: Automatically receives messages into your
Inbox. Choose from On or Off.
• Signature: Adds the signature text to each message sent.
Choose from None or Custom.
• Callback #: Displays the callback number in the text
message. Choose from On or Off.
• Voice Mail #: Enter the speed dial entry set for your
voicemail.
• Block/unblock: Set Block, Set Unblock, and View Blocked
List created for your messages. Enter the phone numbers
you wish to block and unblock. The numbers you block
create the Blocked List.
100
Changing Message Settings
• Entry Mode: Sets the default entry mode for messaging.
Choose from Word, Abc, ABC, or 123.
Text Msg and PIX Msg. Press the right soft key
New to
add to the Quick Text list. Enter your new text and press the
key. The new Quick Text item shows in the first
position of the list.
• Text Auto Scroll: When enabled, advances body text
automatically one line at a time.
Entry Mode
Use Entry Mode to select the default method of text entry.
1. In standby mode, press the
Menu, use the left
navigation key to Messaging. Use the down navigation
key to highlight New PIX Msg. Press
.
2. Press the right soft key
Options. Press
Entry
Mode. The options listed in the following table appear in
the display.
• Word: Enter text into messages using Word.
• Abc: Enter initial capitalization text into messages using
multiple key presses.
• ABC: Enter all capitalization text into messages using multiple
key presses.
• 123: Enter numeric values in a text message.
• Symbols: Allows you to enter symbols.
3. Use the navigation key to highlight the default method of
text entry, then press
. Your settings are saved.
Section 8: Changing Your Settings
101
Section 8
• Quick Text: Displays the Quick Text pre-defined entries for
Section 8
Callback #
Use Callback # to view or modify the callback #. The
Callback # can be inserted into all outgoing messages,
thereby notifying the recipient(s) of your phone number.
1. In standby mode, press the
Menu, use the left
navigation key to Messaging.
2. Press the left soft key
Settings. Press
#. The callback # appears in the display.
Callback
3. Use the CLR key
to backspace and delete numbers.
Press and hold CLR
to delete all characters from
the display.
Enter a new callback # number using the keypad, then
press
to save your changes.
Auto Erase
Use Auto Erase to set the disposal method of messages
after they are read.
1. In standby mode, press the
Menu, use the left
navigation key to Messaging.
2. Press the left soft key
Erase.
Settings. Press
Auto
3. Use the navigation key to highlight On or Off.
4. Press
to select the highlighted option. Your changes
are saved.
Voice Mail #
Use Voice Mail # to view or modify your voicemail
number.
1. In standby mode, press the
102
Menu, use the left
Call Settings
navigation key to Messaging.
3. Use the CLR key
to backspace and delete
numbers. Press and hold CLR
to delete all
characters from the display.
4. Enter a new number and press the
changes.
key to save your
Call Settings
This menu allows you to select the method for answering
incoming calls, setting redial options, setting data rates
for data calls, voice services, and more.
Answer Options
Answer Options contains the sub menus Call Answer
and Auto Answer. Call Answer allows you to select the
method for answering incoming calls, while Auto
Answer allows you to select the delay time before a call is
picked up.
Call Answer
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Call Settings. The Call Settings sub menus listed in
the display.
2. Press
Answer Options. The following options
appear in the display.
Section 8: Changing Your Settings
103
Section 8
2. Press the left soft key
Settings. Press
Voice
Mail #. The Enter Number field is highlighted and *86
appears in the display.
Section 8
• Flip Open: Calls are answered when the folder is
opened.
• Any Key: Calls are answered when any key is
pressed.
• Send Only: Calls are answered when the
key is
pressed.
• Auto Answer: calls are answered automatically with
a 1, 3 or 5 second delay.
3. Use the navigation key to highlight the method you wish
to use for answering calls, then press
.
Auto Retry
Auto Retry automatically redials busy numbers after a
preset period of time.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Call Settings. The Call Settings sub menus listed in
the display.
2. Press
Auto Retry. The following options appear in
the display.
3. Use the navigation key to highlight one of the following
options
•
•
•
•
Off
After 10 Seconds
After 30 Seconds
After 60 Seconds
4. Press
to select the option, or press
to return to
the Call Settings sub menu without making a selection.
104
Ringer Settings
Data Settings
2. Press
Data Settings. The following options appear
in the display. Press the
key to choose from the
following options:
• Data Off: Phone operates in normal voice call mode.
• Data For Next Call: Data call is enabled for next call only.
Phone will reset to Data Off mode after call.
• Data Until Powered Off: Phone will remain in Data Mode
until phone is powered off.
Ringer Settings
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Sounds. The Sounds sub menu is listed in the
display.
2. Press the
Call Sounds. Press
Available options are:
•
•
•
•
•
•
•
Call Ringtone.
Get New
Beep Once
VZW Default Tone
Bell 1
Bell 2
Melody 1-7
No Ring
3. Press
Call Vibrate to set the Call Sounds to vibrate.
Section 8: Changing Your Settings
105
Section 8
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
Call Settings. The Call Settings sub menus listed
in the display.
Section 8
4. Press
to save the setting. The phone returns to Call
Sounds submenu.
Resetting Your Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press the
Menu, use the right
navigation key to highlight
Settings & Tools. Press
System. The System sub menus listed in the
display.
2. Press the
Security, and enter the lock code. Press
Reset Phone. A prompt appears in the display
asking if you wish to restore default settings (except for
the Contacts).
3. Press No to return to the Security list.
106
Section 9: Multimedia
Topics Covered
• Get It Now
• Get Tunes & Tones
• Get PIX
• Get Fun & Games
Section 9
• Get News & Info
• Get Going
• How Keys Work
This section describes how you receive tunes, tones,
images, games, news and information. You can also take
and send pictures from your phone.
Section 9: Multimedia
107
Get It Now
The Get It Now menu provides sub-menus to get tunes &
tones, PIX, fun, games, news and information. You can
also view memory info to see how much space you’ve
used (and have left) for stored media. Use the following
steps for each Get It Now sub menus.
1. In standby mode, press the
navigation key to highlight
right soft key
Info.
Menu, use the left
Get It Now. Press the
Section 9
2. The Get It Now Info menu displays with SYSTEM INFO
highlighted. Press
to view the memory status. Press
the
key to return.
3. Press
the
View Log to see the file transfer activity. Press
key to return.
4. Press
Help to display a list of frequently asked
questions. Use the navigation key to highlight an item
and press the
key to display help text. Press the
key to return.
Get Tunes & Tones
This menu allows you to get new, record new, and set
tunes and tones as your ringtone.
1. In standby mode, press the
Menu, use the left
navigation key to highlight
Get It Now. The Get
Tunes & Tones menu is highlighted, press
.
2. To get new Tunes & Tones press
Get New. Press
New Provider, you are connected to the Get It Now
server and presented with available provider
applications.
108
Get PIX
3. To record a new tune or tone, press
Record New.
The New Voice Memo screen displays. Press the
key to begin recording. Press the left soft key
Pause
to pause or the
key to stop. Your new voice memo is
added to the current ringtone list.
4. Use the down navigation key to highlight the new
recording and press the right soft key
Rename.
Enter a name and press the
key.
5. Press the left soft key
Erase to delete the recording.
This menu allows you to get new PIX from the internet or
take new PIX using your phone’s camera. You can also
view the saved pictures.
1. In standby mode, press the
navigation key to highlight
Get PIX.
Menu, use the left
Get It Now. Press
2. Use the navigation key to choose from Take PIX, PIX
Gallery, PIX Place, or PIX Services.
Take PIX
This menu launches the camera.
1. In standby mode, press the
navigation key to highlight
Get PIX.
2. Press
Menu, use the left
Get It Now. Press
Take PIX. The camera is now active.
Section 9: Multimedia
109
Section 9
Get PIX
3. Press the right soft key
Options, to choose the
specific camera settings. Use the right/left navigation
keys to advance to each setting category, and the up/
down navigation keys to make selections within each
category. The following categories are available:
• Resolution: (640X480), (320X240), (160X120),
• Self Timer: Off, 5 Sec., 10 Sec.
• White Balance: Auto, Sunny, Cloudy, Tungsten, and
Fluorescent.
Section 9
• Quality: Fine, Normal, and Economy
• Shutter Sound: Shutter, Okay, Chime, no Sound.
• Color Effects: Normal, Monochrome, Sepia, Negative,
Emboss, Sketch.
4. Press
Take to capture a picture. Press the right soft
key
Erase to delete it or press the left soft key
Save. The picture is now saved to the Gallery.
PIX Gallery
This menu allows you to review the pictures you have
taken or downloaded and stored into your phone.
1. In standby mode, press the
navigation key to highlight
Get PIX.
Menu, use the left
Get It Now. Press
2. Press
PIX Gallery to view PIX that have been stored
on your phone.
3. Press
to view the pictures in thumbnail mode. Press
View to expand the selected picture.
110
Get PIX
4. Press the right soft key
Options for the following
options. Highlight an option and press
to make your
selection.
PIX Place
Send a PIX message to your online album.
Note: You must first setup your account on the Verizon Wireless website:
www.verizonwireless.com before establishing a connection.
1. In standby mode, press
Menu, use the left
navigation key to highlight
Get It Now. Press
Get PIX.
2. Highlight PIX Place and press . The PIX Place sign-on
screen displays.
3. Enter your Mobile Number and Password. Use the
navigation key to highlight LOGIN and press
. You are
now connected to your online album.
Section 9: Multimedia
111
Section 9
• Send: Launches the Create PIX Msg screen.
• To PIX Place: Transfers the file to the online gallery.
• Create Postcard: Adds text to the selected picture in the
PIX Gallery.
• Set As: Set the picture as the main wallpaper, Picture ID.
• Rename: Allows you to rename the picture.
• Lock: Locks the picture to prevent deletion.
• Erase: Erases the selected picture from the gallery.
• Erase All: Erases all pictures from the gallery.
• PIX Info: Provides the date, time, location, resolution, size
and rights to the selected picture.
PIX Services
1. In standby mode, press
Menu, use the left
navigation key to highlight
Get It Now. Press
Get PIX.
2. Press
PIX Services. Press
Choose from the GET PIX list.
New Provider.
Get Fun & Games
Section 9
Select from several fun and interesting applications or a
broad category of games that you can play on your phone.
1. In standby mode, press
Menu, use the left
navigation key to highlight
Get It Now. Press
Get Fun & Games.
2. Press
Get New.
3. Use the navigation keys to make a selection and press
.
4. Choose the charge either Subscription or Unlimited, then
press
. Follow in screen prompts to apply.
Get News & Info
1. In standby mode, press
Menu, use the left
navigation key to highlight
Get It Now. Press
Get News & Info.
2. The browser is launched and a pop up screen with
available applications is displayed.
3. Use the navigation key to browse the categories.
4. Once the desired category is highlighted, press
enter the category list.
112
to
Get Going
When you use Get News & Info, some of the keys operate
differently than during a normal phone call.
It presents on-screen items in any of the following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can utilize the options or links by using the soft keys.
Download applications that keep you in touch with the
world, keep you organized, and help you find the coolest
spots.
1. In standby mode, press the
navigation key to highlight
Get Going.
Menu, use the left
Get It Now. Press
2. Get New is highlighted. Press
.
3. Highlight the application you wish to download and press
.
4. Highlight your selection and press
. Follow on screen
subscription prompts and press
. The download
process begins.
5. At the “App installed successfully. Would you like to run
it?” prompt, press Yes to launch application, or No to
return to category list.
Section 9: Multimedia
113
Section 9
Get Going
Note: The GET GOING menu will display all downloaded applications, with
the most current download first.
How Keys Work
The following table lists keys and functions
Navigation Key: Use the navigation key to browse
lists and highlight options.
Section 9
CLR Key: A browser back-up key. Press once to back
up one page. Press and hold to go back to home page.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Asterisk/Shift Key: Press before entering text to
enable upper case characters (in Abc mode).
0/Next Key: Press to enter a zero (0), or to display
another word in the dictionary when in Word entry
mode.
Pound/Space Key: Press to insert a space when
entering text.
Numbers: Use the number keys to select items in a
menu if they are numbered.1 - 9.
END Key: Press to exit VZW TODAY and return the
phone to standby mode.
Left Soft Key: Press the left soft key to go to the
highlighted web link and/or perform the function
above it in the display.
114
How Keys Work
Right Soft Key: The right soft key is the Menu key.
Press this key to display a pop-up menu with
several options.
SEND Key: Press to dial a highlighted number
Section 9
Section 9: Multimedia
115
116
Section 9
Section 10: Organizer
Topics Covered
• Calendar
• Alarm Clock
• World Clock
• Notepad
• Calculator
• Voice Services
The topics covered in this section allow you to schedule
appointments, view the calendar, set an alarm, and
perform simple math calculations.
Section 10
Section 10: Organizer
117
Calendar
Schedule up to eight events for any day by indicating each
event’s start and end time. Set alarms for events so that
you can be alerted before an event takes place. Events
scheduled for future dates automatically appear on your
Today events schedule.
Add a new event
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Calendar. The calendar appears in the display
with the current date highlighted.
2. Press the right soft key
Options. A pop-up menu
appears in the display that contains the menu items..
Section 10
• Go To Date: Go to any date that you specify.
• Go to Today: View today’s events.
• Erase Old: Select a past event to delete.
• Erase All: Delete all events in your calendar
3. Press the left soft key
Add to add a new event.
4. The Appointment name field is highlighted. Enter the
name and use the down navigation key to move to the
following fields:
• Start Date: Enter the start date for the event.
• Start Time: Enter the start time for the event.
• AM/PM: Select from A.M. or P.M. for the start time.
• End Date: Enter the end date for the event.
• End Time: Enter the end time for the event.
• AM/PM: Select from A.M. or P.M for the end time.
118
Calendar
• Ringer: Turn the alarm for the event on or off.
• Reminder: Set a reminder up to one day before the event.
5. Fill in and select event details using the navigation keys
and the alpha-numeric keypad.
6. Press
. The event is saved.
View an event
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Calendar.
2. A calendar appears in the display with the current date
highlighted.
3. Use the navigation keys to highlight the date containing
the event that you wish to view. If the event date is in
another month, press the right soft key
Options.
Tip: Use the volume key to move between months in the calendar.
5. Enter the desired date in the box at the bottom of the
display, then press
. The month that you entered
appears in the display with the event date highlighted.
6. Press
View event details for the date.
7. To edit the event, press the left soft key
Edit.
8. To save edits the selected event, press
Save.
9. Press the right soft key
appears in the display.
Options. A pop-up menu
Section 10: Organizer
119
Section 10
4. In the pop-up menu that appears in the display, use the
navigation key to highlight Go To Date, then press
.
10. To erase the current event, press
Erase. A pop-up
menu appears with Yes highlighted. Press the
key
erase, or use the down navigation key to highlight No to
cancel.
Alarm Clock
Your phone has an alarm clock that can be set to go off
once, or recur daily at a specific time. Once set, the alarm
clock is easy to change or turn off.
Set An Alarm
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Alarm Clock. The Alarm Clock menu displays
with the Alarm 1 highlighted.
2. The following options appear in the display
Section 10
• Alarm 1
• Alarm 2
• Alarm 3
3. Use the navigation key to highlight the alarm that you
wish to enable, then press
. The Set Alarm (1, 2, or 3
depending on your selection) screen appears in the
display.
4. The Alarm field is highlighted. Use the left/right
navigation key to select On or Off.
5. Press the down navigation key to highlight the Time
field, then enter the time that you wish for the alarm to
sound.
120
Alarm Clock
6. Press the down navigation key once to highlight the AM/
PM field. Use the left/right navigation keys to select AM
or PM.
7. Press the down navigation key once to highlight the
Frequency field. Use the left/right navigation keys to set
the frequency (occurrence) of the alarm. Below lists and
defines the options for this field.
• Once: The alarm sounds only once, at the time specified.
• Daily: The alarm sounds every day at the time specified.
• Mon-Fri: The alarm sounds Monday through Friday at the
time specified.
• Weekends: The alarm sounds Saturday through Sunday at
the time specified.
8. Press the down navigation key once to highlight the
Ringer field. Use the left/right navigation keys to set the
alert tone.
Disable an alarm before it sounds
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Alarm Clock. The Alarm Clock menu displays
with the Alarm 1 highlighted.
2. The following options appear in the display
• Alarm 1
• Alarm 2
• Alarm 3
Section 10: Organizer
121
Section 10
9. When all fields have correct information entered, press
the
SAVE key to save your settings.
3. The Alarm Clock menu displays with the Alarm 1
highlighted.
4. Use the navigation key to highlight the alarm you wish to
disable, then press the right soft key
Options. A popup menu appears in the display.
5. Press
to reset the highlighted alarm or press
reset all alarms.
to
Snooze
When an alarm sounds, a menu screen displays that
allows you to either turn the alarm off or to have the alarm
ring again after 5 minutes. This is called Snooze.
To use this feature follow these steps:
1. Set one of your phone’s 3 alarms. For more information
about setting an alarm, see "Set An Alarm" on page 120.
Section 10
2. When an alarm sounds, use the up/down navigation key
to highlight Snooze or Dismiss. Press the left soft key
Snooze to turn the alarm off and to set it to ring
again after 5 minutes. Or, highlight Dismiss to turn the
alarm off completely. The alarm turns off and the
standby screen displays.
World Clock
World Clock allows you to view the time of day or night
in any part of the world.
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
World Clock.
122
Notepad
2. Use the left soft key
Cities to display the 45
supported cities. Press the
key to save your entry.
3. Press the right soft key
options:
Options to view the following
• Set as Local Time: Sets the time according to the city
chosen in the Cities field.
• DST On: Sets the Daylight Savings time option.
4. Press
to return to standby mode.
Notepad
Create and store notes in Notepad. You can prioritize or
set an alert for stored notes. Return to Memo Pad anytime
to review and edit your notes.
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Notepad. The Note Pad menu opens.
3. To add a new memo, press the left soft key
then enter the memo using the keypad.
Add,
4. While entering a memo, press the left soft key
Abc,
to display a pop-up menu with the following text entry
modes
•
•
•
•
Word
Abc
ABC
123
Section 10: Organizer
123
Section 10
2. If you have any stored notes, they appear as a list in the
display. If this is your first time in Notepad, No Note
displays.
• Symbols
5. Use the navigation keys to select the other available text
entry modes of 123, Word, and Symbol, or press
to
exit the pop-up menu.
6. When you’re finished entering details for the note, press
. The note is saved.
Review, Add, Edit, and Erase Memos
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Notepad. The Note Pad menu opens. If you
have any stored notes, they appear as a list in the
display.
2. With a memo highlighted, press the right soft key
Options. A pop-up menu with the options listed in the
following table appears in the display:
Section 10
• Edit: Edit the note currently highlighted or appearing in the
display.
• Erase: Erase the note currently highlighted or appearing in the
display.
• Erase All: Erase all notes.
3. Use the navigation key to highlight an option or press
to exit the pop-up menu.
4. Press
to perform the highlighted option’s function.
Calculator
You can perform calculations, including addition,
subtraction, multiplication and division using your
phone.
124
Voice Services
1. In standby mode, press the
Menu, then press the
right navigation key to
Settings & Tools. Press
Tools
Calculator. The Calculator opens.
2. Enter the first number in your equation using the keypad.
(Numbers can be up to nine digits long.)
3. Press the right soft key
Operator to display a pop-up
menu which allows you to enter a Parenthesis or Power.
Press the left soft key
Clear to clear all data entered.
4. Press
to change the sign for a number to a negative.
5. Press the
to add a decimal point.
6. Use the navigation key to set the type of calculation that
you wish to perform. Your choices are as follows.
•
•
•
•
[+] Addition
[-] Subtraction
[x] Multiplication
[÷] Division
8. Press
to perform the calculation and view the result.
Voice Services
This menu set the voice services settings, create voice
memos, and access Text To Speech (TTS). For more
information about Voice Services, see "Voice Services
Settings" on page 30.
Section 10: Organizer
125
Section 10
7. Use the keypad to enter the second number into your
equation.
126
Section 10
Section 11: Mobile Web
Topics Covered
• Mobile Web
• Launching Mobile Web
• Exit Mobile Web
• Navigate the Web
• Mobile Web soft keys
• Links
• Place a call while using Mobile Web
This section outlines the available gaming options and
accessories for your phone. For more information, contact
your service provider.
Section 11
Section 11: Mobile Web
127
Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Mobile Web allows you to surf the web from your
wireless phone.
Note: If you receive a call while using Mobile Web, the application is put on
hold during the call. Once the call ends, your Mobile Web session resumes
where you left off. Only available within the Verizon Wireless Enhances
Services Area
Note: Any time the service indicator icon is visible, you are connected to
the Internet and billed accordingly. Rates and prices vary according to your
service contract. For further information on billing contact Verizon Wireless.
Only available within the Verizon Wireless Enhances Services Area
Launch Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
1. In standby mode, press the up navigation key. Mobile
Web and a list of categories (representing one or more
web sites) appears in the display.
2. Use the navigation key to browse the categories.
Section 11
3. Once the desired category is highlighted, press
enter the category list.
128
to
Exit Mobile Web
Exit Mobile Web
This feature is currently unavailable outside of the
United States. Only available within the Verizon Wireless
Enhances Services Area.
䡵
Press
to exit Mobile Web.
Navigate the Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
When you use Mobile Web, some of the keys operate
differently than during a normal phone call.
Mobile Web presents on-screen items in any of the
following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can act on the options or links by using the soft keys.
Mobile Web Soft Keys
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Section 11: Mobile Web
129
Section 11
At the bottom of the Mobile Web display contains the
browser commands. The left
and right
soft keys on
the keypad are used to perform the commands in the
display. These are called “soft keys” because their
function changes depending where you are in the
application.
How Mobile Web keys work
The following table lists Mobile Web keys and functions.
Navigation Key: Use the navigation key to browse
lists and highlight options.
CLR Key: A browser back-up key. Press once to back
up one page. Press and hold to go back to Mobile Web
home page.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Asterisk/Shift Key: Press before entering text to
enable upper case characters (in Abc mode).
0/Next Key: Press to enter a zero (0), or to display
another word in the dictionary when in Word entry
mode.
Pound/Space Key: Press to insert a space when
entering text.
Numbers 1 - 9: Use the number keys to select items
in a menu if they are numbered.
Section 11
END Key: Press to exit Mobile Web and return the
phone to standby mode.
Left Soft Key: Press the left soft key to go to the
highlighted web link and/or perform the function
above it in the display.
130
Links
Right Soft Key: The right soft key is the Menu key.
Press this key to display a pop-up menu with several
options.
SEND Key: Press to dial a highlighted number.
Links
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Links can serve several purposes, such as jumping to a
different page, to a different site, or initiating a phone call.
Links are shown inside of brackets ([ ]). Normally, the left
soft key
is used to select a highlighted link.
Place a Call While Using Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
You can place a call while using Mobile Web if the website
supports this feature. Press the appropriate soft key to call
the number. In most cases you can also press
to call the
number. The Internet connection terminates when you
initiate the call. After you end the call, your phone returns
to standby mode.
Section 11
Section 11: Mobile Web
131
132
Section 11
Section 12
Section 12: Health and Safety
Information
Topics Covered
• Health and Safety Information
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safety use your phone
Section 12: Health and Safety Information
133
Section 12
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of
the scientific literature related to the biological effects of
RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
134
Health and Safety Information
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations
are restricted to Samsung-supplied, approved, or nonSamsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with
the above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
Section 12: Health and Safety Information
135
Section 12
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Section 12
• Head: 1.45 W/Kg.
• Body-worn: . 1.02 W/Kg.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is
usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head. These
RF exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
136
Consumer Information on Wireless Phones
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using wireless
phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low
levels of radio frequency energy (RF) in the microwave
range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any
biological effects. Some studies have suggested that
some biological effects may occur, but such findings
have not been confirmed by additional research. In
some cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
Section 12: Health and Safety Information
137
Section 12
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
Section 12
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
138
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated
in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals.
However, many of the studies that showed increased
Section 12: Health and Safety Information
139
Section 12
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
Section 12
tumor development used animals that had been
genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in
absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under
which people use wireless phones, so we don't know
with certainty what the results of such studies mean for
human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period of
phone use in these studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
140
Consumer Information on Wireless Phones
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
Section 12: Health and Safety Information
141
Section 12
more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation
of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is
held, or which model of phone is used.
Section 12
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the context
of the latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point
we do not know that there is - it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is
a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce your
RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
142
Consumer Information on Wireless Phones
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was
not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
Section 12: Health and Safety Information
143
Section 12
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Section 12
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed
to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
144
Consumer Information on Wireless Phones
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
Section 12: Health and Safety Information
145
Section 12
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored
by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
• World health Organization (WHO):
http://www.who.int/peh-emf/
Section 12
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
146
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
Section 12: Health and Safety Information
147
Section 12
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
Section 12
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory
to another device, read its user's guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing
over your shoulder).
148
Using Your Phone Near Other Electronic Devices
Using Your Phone Near Other Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and phones also vary in the amount
of interference they generate.
Section 12: Health and Safety Information
149
Section 12
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Section 12
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing
device users in finding phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their box
or a label on the box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
150
Potentially Explosive Environments
Other Medical Devices
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices requireyou to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
Section 12: Health and Safety Information
151
Section 12
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Section 12
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
152
FCC Notice and Cautions
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make calls
that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Section 12: Health and Safety Information
153
Section 12
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
Section 12
Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority
to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
154
Product Performance
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone informs
you of the current signal strength by displaying a
number of bars next to the signal strength icon. The
more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself
by pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level.
Section 12: Health and Safety Information
155
Section 12
• Failure to observe these instructions may lead to the
Section 12
This power can range from 0.006 watts to 0.2 watts in
digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
156
Battery Precautions
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Section 12: Health and Safety Information
157
Section 12
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Section 12
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
158
Care and Maintenance
Care and Maintenance
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
Section 12: Health and Safety Information
159
Section 12
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years
• Use only the supplied or an approved replacement antenna.
Section 12
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
160
Section 13: Warranty Information
Topics Covered
• Standard Limited Warranty
Section 13: Warranty Information
161
Section 13
This section explains the warranty information for
your new phone.
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
Section 13
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged
due to normal use; (d) malfunctions resulting from the use
of Product in conjunction with accessories, products, or
162
Standard Limited Warranty
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 13: Warranty Information
163
Section 13
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals
on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than
the SAMSUNG phone for which it is specified.
Section 13
warranted for a period of ninety (90) days. All other
repaired/replaced Product will be warranted for a period
equal to the remainder of the original Limited Warranty
on the original Product or for 90 days, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
164
Standard Limited Warranty
RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
Section 13: Warranty Information
165
Section 13
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND
Section 13
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT
WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
166
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America,L.P. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Printed in South Korea
Section 13: Warranty Information
167
Section 13
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
168
Section 13
Index
Call Histories 25
Roaming 28
Call history
Numerics
calls using_ 27
definition_ 25
deleting entry_ 27
icons_ 26
new contact_ 27
Settings 103
2-touch dialing 71
3-touch dialing 72
911, notes about 96
A
Adding a New Contact Entry 63
Alarm clock
snooze 122
turn off the alarm 121
sounds off 18
All
Answer options 103
Auto answer 104
Auto answer icon 18
Auto delete 102
Auto retry 104
B
Backlight settings 91
Backup to last menu 48
Banner, creating 91
Battery
charging 20
indicator 21
removing 20
strength icon 18
C
Call Functions 23
Answering a Call 24
Call
Callback # 102
Change lock 96
Charger, travel 21
Clear key 15
Command Keys 14
Contacts
pause 65
Contrast 92
Creating and Sending New
Messages 85
Creating and Sending Pix
message 86
Creating and Sending Text
message 85
D
Data sub menu 105
Dialing
one-touch 71
three-touch 72
two-touch 71
Disable alarm 121
Display
animation 93
169
backlight 91
language 99
screen icons 16
Display Themes 93
Draft messages 81
Drafts folder 81
E
Emergency numbers
lock mode 97
Get Pix 109
Get Tunes & Tones 108
Getting Started 5
Activating Your Phone 6
Understanding this User
Manual 7
Voicemail 6
GPS icons 18
Groups
creating 67
move entries from/to 66
send messages to 67
send pix msg to 68
viewing 66
End key 15
Entering Text 55
Changing the Text Entry
Mode 56
Entering Numbers 59
Entering Symbols 58
Entering Upper and Lower Case 57
Using Word Mode 57
Events, viewing calendar
119
Exit Mobile Web 129
F
Fast fact, description 7
Finding a Contacts Entry
69
Finding My Phone Number
72
Folder
drafts 81
inbox 79
G
Get News & Info 112
170
H
Hard pause 65
Health and Safety Information 133
I
Icons
All sounds off 18
battery strength 18
display 16
signal strength 16
TTY 18
Inbox folder 79
Indicator
battery strength 18
new message 18
no service 17
roaming 17
signal strength 16, 17
vibrate mode 18
Instant Messaging 88
In-use menu 49
Multimedia 107
My phone # 72
L
N
Language setting 99
Launch Mobile Web 128
Left soft key 14
Links 131
Location 98
Lock code, changing 96
Lock phone 95
Navigate the Web 129
Navigation key 16
Navigation key shortcuts
M
Memos, editing 124
Menu Navigation 47
Menu Outline 50
Menu shortcuts 48
Menu, in-use option 49
Message folder
drafts 81
inbox 79
Messages, receive in call
78
Messaging 75
Types of Messages 76
Mobile IM 88
Mobile Web 127
48
New message icon 18
No service indicator 17
Note pad 123
Notes and tips 7
Notes, description 7
O
Organizer
note pad 123
view an event 119
world time 122
P
Personal Organizer 117
Alarm 120
Calculator 124
Calendar 118
Pix messages
view later 79
Mode
PIX Services 112
Place a call while using
Mobile Web 131
Planner
call answer 103
entry 101
Msg Setting 100
Powering off 6
Powering on 6
Keys 114
soft keys 129
add a new event 118
171
R
Receive messages in call
78
Receive text messages 83
Receiving a PIX Message
78
Removing battery 20
Reset phone 106
Restrict calls 98
Restriction 98
Retrieving a Message 84
Retrieving New Message
83
Return to last menu 48
Reviewing sent 80
Right soft key 14
Roam option 28
Roaming
Set an alarm 120
Settings 89, 94
backlight 91
banner 91
change lock 96
Display Settings 90
language 99
lock phone 95
Resetting Your Phone
106
Ringer Settings 105
Security Settings 94
Shortcut List 94
Shortcut to menus 48
Signal strength icon 16
Snooze 122
Speakerphone Key 16
Speed dial, assigning 72
Standard Limited Warranty
Definition 28
options 29
Standard Limited Warranty 162
Roaming indicator 17
Store numbers, shortcuts
S
71
Security
change lock 96
lock phone 95
restriction 98
voice privacy 97
Send key 15
Storing numbers after a
call 70
T
Take Pix 109
Text messages, receiving
Sent, reviewing messages
83
80
Three-touch dialing 72
Tip
172
find a name_ 24
Tip, description 7
Today 118
Travel charger 21
TTY mode 29
Turn your phone off 6
Turn your phone on 6
Turning Your Phone On
and Off 6
Two-second pause 65
Two-touch dialing 71
U
Understanding Your Contact List
Finding a Contact Entry
65
Understanding Your Contacts 61
Adding a New Contact
Entry 62
Deleting a Contact Entry
70
Editing an Existing Contact Entry 69
Finding My Phone Number 72
Speed Dialing 71
10
Front View of Your Phone
11
V
Vibrate mode icon 18
View an event, calendar
119
view pix msg later 79
voice call icon 17
Voice mail
listening to 7
setup 6
Voice mail icon 18
Voice notes
renaming 32
Voice privacy 97
Voice Signal
features_ 37
settings 33
Voice signal
description_ 37
digit dial_ 37
name dial_ 44
settings_ 30
Understanding Your Phone
Voice signal menu_ 30
Voicemail 84
Voicemail, viewing messages 85
9
W
Battery 19
Display Screen 16
Features of Your Phone
Wallpaper 92
Wallpaper, choosing 92
Warranty Information 161
173
World time 122
174