The Next Generation Water heater
Available in 66 and 80 Gallon Models











Best efficiency in the industry
High recovery rate
Made entirely from stainless steel 304
3/4” water inlet, outlet, and condensate
line
Backup heating element
Top exhaust duct
Releases cool dehumidified air at 400 cfm
when heat pump is in operation
User friendly touch pad controls
Built in anode rod
Easy access side connections
Water temperature can be set anywhere
between 90 ̊ F to 135 ̊ F
Specifications
ATI66
ATI80
Tank size
Energy Factor (hybrid mode)
First Hour Rating (hybrid mode)
Heat Pump BTU Rating
Electric Element
Backup Electric Element
Compressor
Refrigerant
Tank Capsule (stainless steel)
Diameter (D)
Height (H)
Weight
Duct Diameter (top of unit)
Decibel Rating
Voltage
Duct-in
66 gallons
2.35
70 gallons
2.5 kW
4 kW
4 kW
Panasonic
R410A
SS304
25.5 inches
70.5 inches
243 lbs
6 inches
48
220V
Optional
80 gallons
2.2
80 gallons
2.5 kW
4 kW
4 kW
Panasonic
R410A
SS304
25.5 inches
75.5 inches
254 lbs
6 inches
48
220V
Optional









3 operation modes
- Energy saver (heat pump only)
- Hybrid (heat pump & electric element)
- High demand (electric element only)
4 way reversing valve for auto defrost
Auto overheat detection
Environmental friendly refrigerant R410a
Can operate efficiently in ambient temperature
ranging between 20 ̊ F to 120 ̊ F
Built in T&P valve
Low nose unit
Brass drain valve
Limited Lifetime Warranty
D
D
6”
Backup
Condensate
Line
Condensate
Line
Hot
Outlet
Top View
T&P
Valve
H
Cold
Inlet
User Friendly
Touch Pad
Controls
Drain
Valve
*AirGenerate reserves the right to make changes without notice.
For more information about using AirTap™ Integrated in your home or business, contact:
Sales
8500 Commerce Park Drive, Houston, TX 77036 - U.S.A.
713.574.6729 or sales@airgenerate.com or visit www.airgenerate.com