Hampton Bay L-GZ804PST Instructions / Assembly

Parts List

Big Screen

A

Small Screen（left）

B

Small Screen（right）

C

Long beam

D

Short beam

E

Down tube

F

Long pole

G

Short pole

H

Long center beam

I

Short center beam

J

Top tube

K

Big top connector

L

Small top pole

M

Small top connector

N

Hook

O

Poppyhead

Small canopy

P

Q

Big canopy

Mosquito net

R

S

4

1

1

4

1

2

4

1

1

1

1

4

2

8

4

2

2

4

4

Hardware Pack 1

AA

BB

W

Bolt M6X20

Washer M6

Wrench M6

32PCS

32PCS

1 PC

Fig.1: Insert the head of the small screen(left) (B)into the hole of the big screen(A),then pull down the small screen(left) (B)to keep B and

A in the same level, and lock them tightly with bolt(AA)and washer(BB).Attach the small screen (right)(C) to the big screen(A) in the same way.

Fig.2: Attach the long beam(D)to the small screen B(C) with bolt(AA)and washer(BB).Attach the short beam(E) in the same way.

Hardware Pack 2

BB Washer M6 8PCS

CC Bolt M6*35 4PCS

DD Nut M6 4 PC

Fig.3: Insert the hook (O) into the big top connector(L),then insert the top tube(K) into the big top connector(L).

Fig.4: Insert the long beam (G) and short beam (H) into the top tube (K).

Fig.5: Insert the long beam (G) and the bottom side of short beam into the down tube (F).

Fig.6: Insert the down tube (F) into the big screen (A), as shown in the picture , G corresponding C,H corresponding B.

Fig.7: Insert the long center beam (I) and short center beam (J) into the big top connector (L).

Fig.8: Attach the long center beam (I) and the bottom of the short center beam to the short beam (E) and long beam (D) with bolt (CC) 、 washer (BB) and nut (DD).

Fig.9: Insert the small top pole (M) into the small top connector

(N).

Fig.10: Put the small canopy (Q) onto the assembled small top, secure the four corners, attach the poppyhead (P) onto the small top connector.

Fig.11: Put the big canopy (R) on the big top, do not unfold, then insert the assembled small top into the top tube (K).

Fig.12: Open the big canopy and secure it to the cant beam and center beam.

Hardware Pack 3

EE Mosquito net loop

FF Ground stake

52PCS

12PCS

Fig.13: Hang the mosquito net (SS) on the poles with mosquito net loop

(EE).

Fig.14: Secure the gazebo to the lawn with ground stake (FF).