Instructions for Installation and Use Double Ovens

Instructions for Installation and Use
Double Ovens
Users Instruction & Installation Book for:
Note: Timer must be set to ‘Time of Day’ and ‘Manual’
before the ovens can be used.
Note: Ensure that the oven is securely fixed to the
cabinet before use.
To the Installer
Before installation fill in the product details on the back cover of
this booklet. The information can be found on the rating plate.
To the User
You must read the instructions prior to using the appliance and
then retain them for future reference.
For more information on our exciting product range ring
Creda Answer Centre 0541 54 64 74
OR
Visit us on the NET at
http://www.creda.co.uk
Our site invites you to make use of our interactive cookbook and product selector. Feel
free to browse our product range to see what’s bubbling away at the moment or to ask
for help on our products and services
General Domestic Appliances Ltd. Morley Way Peterborough PE2 9JB
Creda Answer Centre 0541 54 64 74
Web http://www.creda.co.uk
It may be necessary from time to time to change the specification outlined in this booklet without notice. Any change which is made will not affect your statutory rights.
CONTENTS
Introduction
For Your Safety – Always
For Your Safety – Never
Features
Controls
Oven Timer Operation
Know Your Timer
Electronic Clock & Automatic Oven Timer Operation
Grill Pan and Handle
Using The Top Oven for Grilling
Guide To Grilling Successfully
Using the Top Oven as a Convection Oven
Using the Main Oven as a Fan Oven
Using the Main Oven for Other Functions
Temperature Conversion Scale
Oven Temperature Charts
Cooking Results Not Satisfactory
Care & Cleaning
Installation
Something Wrong?
Service
4
5
6
7
8
9
10
11-14
15
16
18
19
21
22
24
25-26
27
28-31
32-35
36
Back Cover
3
INTRODUCTION
Your new cooker is guaranteed* and will give lasting service. This guarantee is
only applicable if the appliance has been installed in accordance with the
installation instructions detailed in this booklet.
To help make best use of your cooking equipment,
please read this booklet carefully.
The cooker is designed specifically for domestic use and responsibility will not
be accepted for use in any other installation.
Note: When the cooker is first used, an odour may be emitted - this will cease
after a short period of use
To help remove the 'new' smell, heat up the empty ovens to maximum temperature
for a minimum of two to three hours keeping the oven doors closed. Ensure that
the room is well ventilated (e.g. open a window or use an extractor fan) and that
persons who may be sensitive to the odour avoid any fumes. It is suggested that
any pets be removed from the room until the smell has ceased.
This odour is due to any temporary finish on oven linings and elements and also
any moisture absorbed by the insulation.
* The guarantee is subject to the provisions that the appliance:
(a)
(b)
(c)
(d)
Has been used solely in accordance with the Users Instruction Book.
Has been properly connected to a suitable supply voltage as stated
on the rating plate attached to this equipment.
Has not been subjected to misuse or accident or been modified or
repaired by any person other than the authorised employee or agent.
Has been correctly installed.
This appliance conforms to the following EEC Directives:
Low Voltage Equipment
73/23/EEC
93/68/EEC
4
Electromagnetic Compatibility
89/336/EEC
92/31/EEC
93/68/EEC
FOR YOUR SAFETY
When used properly, your appliance is completely safe but as with any
electrical product there are certain precautions that must be observed.
PLEASE READ THE PRECAUTIONS BELOW BEFORE USING YOUR
APPLIANCE.
ALWAYS
● Always make sure you remove all packaging and literature from inside the
oven and grill compartments before switching on for the first time.
● Always make sure you understand the controls prior to using the appliance.
● Always keep children away from the appliance when in use as the surfaces
will get extremely hot during and after cooking.
● Always make sure all controls are turned off when you have finished cooking
and when not in use.
● Always stand back when opening an oven door to allow any build up of steam
or heat to disperse.
● Always use dry, good quality oven gloves when removing items from the
oven/grill.
● Always take care to avoid heat/steam burns when operating the controls.
● Always turn off the electricity supply at the wall switch before cleaning and
allow the appliance to cool.
● Always make sure the shelves are in the correct position before switching on
the oven.
● Always keep the oven and grill doors closed when the appliance is not in use.
● Always take care when removing utensils from the top oven when the main
oven is in use as the contents may be hot.
● Always keep the appliance clean as a build up of grease or fat from cooking
can cause a fire.
● Always follow the basic principles of food handling and hygiene to prevent
the possibility of bacterial growth.
● Always keep ventilation slots clear of obstructions.
● Always refer servicing to a qualified appliance service engineer.
SAFETY ADVICE
IN THE EVENT OF A CHIP PAN OR ANY OTHER PAN FIRE:
1.
TURN OFF THE COOKER APPLIANCE AT THE WALL SWITCH.
2.
COVER THE PAN WITH A FIRE BLANKET OR DAMP CLOTH, this will smother
the flames and extinguish the fire.
3.
LEAVE THE PAN TO COOL FOR AT LEAST 60 MINUTES BEFORE MOVING IT.
Injuries are often caused by picking up a hot pan and rushing outside with it.
NEVER USE A FIRE EXTINGUISHER TO PUT OUT A PAN FIRE as the force of the
extinguisher is likely to tip the pan over. Never use water to extinguish oil or
fat fires.
5
FOR YOUR SAFETY
NEVER
● Never leave children unsupervised where a cooking appliance is installed as all
cooking surfaces will be hot during and after use.
● Never allow anyone to sit or stand on any part of the appliance.
● Never store items above the appliance that children may attempt to reach.
● Never remove the oven shelves whilst the oven is hot.
● Never heat up unopened food containers as pressure can build up causing the
container to burst.
● Never store chemicals, food stuffs or pressurised containers in or on the
appliance, or in cabinets immediately above or next to the appliance.
● Never operate the grill with the door closed as this will cause the appliance to
overheat.
● Never use the appliance as a room heater.
● Never use the grill to warm plates.
● Never dry any items on the oven doors.
● Never install the appliance next to curtains or other soft furnishings.
● Never allow children to play with the oven controls.
DISPOSAL OF YOUR PRODUCT
To minimise the risk of injury to children please dispose of your product carefully and safely.
Remove all doors and lids (where fitted). Remove the mains cable (where fitted) by cutting off
flush with the appliance and always ensure that no plug is left in a condition where it could be
connected to the electricity supply.
To help the environment, Local Authority instructions should be followed for the disposal of
your product.
6
FEATURES
TOP OVEN TEMPERATURE
& GRILL SELECTION CONTROL
GRILL SETTING CONTROL
MAIN OVEN TEMPERATURE
& FUNCTION
MAIN OVEN
CONTROL
PILOT
CLOCK & OVEN TIMER
TOP OVEN
PILOT
REMOVABLE GRILL
ROOF PANEL (NOT
ALL MODELS OR
SOLARPLUS GRILL
MODELS)
GRILL
ELEMENT
OVEN LIGHT
(NOT ALL MODELS)
STAY CLEAN
LINER
GRILL PAN
INNER DOOR
GLASS (NOT ALL
MODELS)
TOP OVEN
DOOR
OVEN LIGHT
OVEN FAN
OVEN SHELF
STAY CLEAN LINER
MEAT PAN
MAIN OVEN DOOR
INNER DOOR GLASS
RATING PLATE – Record the Model No. and the Serial No.
on the Service Page.
7
CONTROLS
GRILL SETTING CONTROL
A
MAIN OVEN TEMPERATURE AND FUNCTION CONTROL
B
C
TIMER
TOP OVEN TEMPERATURE AND GRILL SELECTION CONTROL
CONTROL MARKINGS
Control
Knob
Description
A
Grill Setting Control
Function
Selects the heat at which the grill will cook
the food.
1 – 6 Grill Settings Control:
1 = Low, 6 = High
Note: To grill you must first select a grill
function using control (B).
B
C
Top Oven Temperature &
Grill Selection Control
Main Oven Temperature &
Function Control
100 220
Selects the cooking temperature
(Degrees Centigrade) when using
the top oven as a conventional oven.
Half
Grill
Switches the top oven to “Half Grill”
mode.
Full
Grill
Switches the top oven to “Full Grill”
mode.
Fan
Only
Fan Only Setting
- This is used to decrease the amount
of time required to defrost food items.
Oven
Light
Oven Light Only
- Switches on the Main Oven Interior
Light Only.
80 230
Cooling Fan:
Control Panel
Illumination
Oven Interior
Lights
Slow Cooking
8
Main Oven Temperature Scale (In
Degrees Centigrade).
- When cooking select the required
cooking temperature.
A gentle flow of air will be blown below the control panel when any
selector switch is used.
Note: Whenever the appliance has been used, the cooling fan may
run on or restart itself after all the controls have been turned off.
This indicates that the appliance is still warm.
The control panel illumination is operated when any control is used.
Note: If the cooling fan runs on or restarts, the control panel will
remain/become illuminated to indicate that the appliance is still
warm.
The oven lights are operated when their respective oven control is
used. (N.B. Not all models have a top oven interior light).
The main oven has a light only position.
The main oven has a “Slow Cook Setting” this can be used for slow
cooking, keeping food warm and warming plates for a short period.
Note: It is advisable to check that all oven controls have been switched off
when you have finished using the appliance.
OVEN TIMER OPERATION
Note: Timer must be set to ‘Time of Day’ and ‘Manual’ before the ovens
can be used.
AUTOMATIC COOKING
The Top Oven and Main Oven can be controlled by the automatic timer. When the
timer control has been set for one oven, it is possible to use the other oven only
during the same automatic cooking programme.
NEVER operate the grill when the ovens are set to cook automatically because the
oven cavity can become warm and this may cause bacterial growth in food.
HINTS ON AUTOMATIC COOKING
1. Select foods which will require the same cooking time and temperature.
2. To ensure food does not cool down and require reheating, set the end time so the
food is ready when you require it.
3. Always ensure that meat and poultry is defrosted before placing in the oven.
4. Whenever possible, take food out of the refrigerator and keep it as cool as possible.
5. If cooking food that requires frying before placing in the oven for auto cooking, keep
the delay start time to a minimum.
6. Never place hot or warm food in the oven for delay start cooking as it could cause the
oven to be warm and produce harmful bacteria in the food.
7. We advise that dishes containing left-over cooked poultry or meat, e.g.
Shepherd's Pie, should not be cooked automatically if there is to be a delay
period.
8. Ensure that delay start times are kept to a minimum to prevent bacterial growth in
food.
9. Wine or beer may ferment and cream may curdle during the delay period so it is best
to add these ingredients just before serving.
10. Foods which discolour should be protected by coating in fat or tossing in water to
which lemon juice has been added, prior to placing food in the oven.
11. Dishes containing liquid should not be filled too full to prevent boiling over.
12. Food should be well sealed (but not airtight) in a container to prevent the loss
of liquid during cooking. Aluminium foil gives a good seal.
13. Always ensure that food is piping hot and cooked thoroughly before serving.
14. Only reheat food once.
9
KNOW YOUR TIMER
CLOCKFACE
The timer incorporates a 24 hour clock.
Ensure the correct time of day is always set, before using you cooker.
PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00
HOURS AND 06.00 HOURS TO PREVENT GLARE.
However, should you operate the timer during these hours the display will
return to normal brightness for a few seconds and then dim again.
SYMBOLS
will light up when you select a Minute Minder Period and will remain lit for the
period set. At the end of the Minute Minder Period, the timer will emit an audible
tone for 2 minutes, the symbol will start to flash and will continue to flash until
the Minute Minder function is cancelled.
–
–
This “Cookpot” symbol will light up either:–
When you press the Cook Period Button and set a length of time for an Auto
Cooking Programme. (It will go out again a few seconds after you release the
timer buttons).
During the actual Cook Period.
“AUTO” will light up:–
– When the timer is first turned on it will flash. (It will go out when a time of day
is set.
– When an Auto Cooking Programme has been set.
The “Auto” symbol will flash at the end of an Auto Cooking programme to indicate
that the programme has finished.
(When the “Auto” symbol is flashing, to return the oven to Manual operation,
turn the oven controls off, ensure that the correct time of day is set, and press the
“Manual” button twice – The “Auto” symbol will go out).
Note: If at any time the display shows a ‘KEY’ symbol, it is likely that the timer has been set incorrectly. OVEN
COOKING IS NOT POSSIBLE. The ‘KEY’ symbol can be deleted and the cooker returned to manual operation by:
- Simultaneously pressing the Minute Minder and the Cook Period buttons for a period of approximately 8
seconds.
- Releasing the buttons and pressing the ‘+’ button.
TIMER FUNCTION BUTTONS
Minute Minder
Button
Here you can set a time period of up to 23 hours 59 minutes, that will count down.
When it reaches zero, the timer will emit an audible tone.
For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.
AUTO COOKING PROGRAMME
Cook Period Button
End Time Button
Manual Button
“+” and “–” Buttons
10
Cook Period is the actual length of time for which, the timer will switch the oven(s)
on as part of an “Auto Cooking” programme.
(e.g. If you set 2 hours, the food will be cooked for 2 hours).
The time of day at which you want an “Auto Cooking” programme to end.
For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The
timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear
a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.
Notes:
- When setting an Auto Cooking programme you will need to set the oven
controls(s) to the required temperature(s) when you set the timer.
- If an Auto Cooking programme has been set the oven(s) will only operate during
the pre-programmed time.
Needs to be pressed to cancel an Auto Cooking programme and return the ovens(s)
to Manual operation.
Used to adjust the various timer function settings.
ELECTRONIC CLOCK & AUTOMATIC OVEN
TIMER OPERATION
SETTING THE TIME OF DAY
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is turned on.
Step 3 When switched on the display will show 0.00 and Auto symbol will be
flashing intermittently.
Step 4 Press & hold in both the “Minute Minder” & “Cook Period” button together.
Step 5 With the “Minute Minder” & “Cook Period” buttons still held in, press either
the “+” or “–” buttons to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note:
You cannot adjust the time of day if the timer has been set for an Auto
Cooking Programme.
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day is set correctly.
Step 2 Press and hold the Minute Minder Button, a
symbol will light up.
Step 3 With the “Minute Minder” button held in, set the required Minute Minder
time using the “+” and “–” buttons.
Release all buttons and the timer display will revert back to the time of day. Bell
symbol will remain lit to signify that a Minute Minder period has been set.
At the end of the set time a bleeping sound will be heard, and the symbol will
flash for approximately 2 minutes.
After approximately 2 minutes the bleeping sound will stop and the symbol will
go out automatically.
Step 4 To cancel the bleeping sound within the two minutes press the Minute
Minder button.
Note 1
When the Minute Minder has been set, the time remaining can be checked at any
time by simply pressing the Minute Minder button.
Note 2
If necessary the Minute Minder can be cancelled before the tone sounds by pressing
and holding the Minute Minder button and then at the same time pressing the “–”
button until 0.00 appears in the display window.
11
ELECTRONIC CLOCK & AUTOMATIC OVEN
TIMER OPERATION
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be selected using your timer:–
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a chosen period before the oven switches
off Automatically.
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Step 3 Press and hold in the Cook Period button.
The display will read 0.00 with the cookpot (
) symbol lit.
Step 4 With the Cook Period button still held in, set the required Cook Period
using the “+” and “–” buttons.
Release the buttons and the timer display will revert to the time of day with the
Auto symbol and Cookpot ( ) symbol lit.
Step 5 Press and hold in the “End Time” button.
The display will read the earliest possible end time for the Cook Period that
you have set above.
The Auto symbol and Cookpot ( ) symbol lit.
Step 6 With the End Time button still held in, use the “+” and “–” buttons to set
the “End Time” (i.e. The time you require the oven to switch off ).
Release all the buttons and the timer will revert back to the time of day.
The “Auto” symbol will remain lit to signify that an Auto Cooking Programme has
been set. The ( ) symbol will go out.
Step 7 Turn the oven control(s) to the required temperature, and if
necessary select the appropriate oven function.
Note: If your appliance has two ovens: When the timer has been set for one oven
it is possible to use the other oven only during the same Automatic programme.
At the end of the Automatic Cook Period the Auto Symbol will flash and an
intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless cancelled.
The “Auto” symbol will continue to flash until the timer is returned to Manual
operation (see below).
Step 8 Press the Manual button to cancel the bleeping sound.
(If 2 minutes has not elapsed).
Step 9 Turn the oven control(s) to the OFF position.
Step 10 Press the manual button again to return the oven(s) to Manual Operation.
(The Auto symbol will go out)
12
ELECTRONIC CLOCK & AUTOMATIC OVEN
TIMER OPERATION
Note 1
When cooking automatically the Cook Period can be checked at any time by simply
pressing the Cook Period button.
Note 2
When cooking automatically the End Time can be checked at any time by simply
pressing the End Time button.
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET COOK
PERIOD
Step 1
Step 2
Step 3
Check that the correct time of day is set, if not follow instructions for setting the time of day.
Place food onto the correct shelf position in the oven and close the oven door(s).
Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven
function.
Step 4 Press & hold in the “Cook Period” button, the display will read 0.00 and the
cookpot ( ) symbol will light up.
With the Cook Period button still held set the required Cook Period using the “+”
and “–” buttons. Example: 1hr 30 minutes (as shown).
Note: Cook Period is the length of time the food requires to cook.
Step 5 Release all buttons.
The timer display will revert to the time of day with the Auto symbol lit & Cookpot
symbol remaining lit.
NOTE: The Cookpot symbol disappears
At the end of the Cook Period the “Auto” symbol will flash and an intermittent
bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless cancelled.
The “Auto” symbol will continue to flash until the timer is returned to Manual
operation (see below).
Step 6 Press the manual button to cancel the bleeping.
(If 2 minutes has not elapsed)
Step 7 Turn the oven control(s) to the OFF position.
Step 8 Press the “Manual” button again to return the cooker to Manual operation.
(The Auto symbol will go out).
13
ELECTRONIC CLOCK & AUTOMATIC OVEN
TIMER OPERATION
TO CANCEL AN AUTO COOKING PROGRAMME BEFORE
THE COOK PERIOD HAS FINISHED.
Step 1 Turn the oven control(s) to the OFF position.
Step 2 Press and hold in the “Cook Period” button.
Step 3 With the “Cook Period” button still held in, return the display to 0.00 by
pressing the “–” button.
Step 4 Release the “Cook Period” and “–” buttons and the display will revert to
the time of day and the “Auto” symbol will flash.
Step 5 Press the “Manual” button to return the oven(s) to “Manual” operation.
The “Auto” symbol will go out.
Note 1
When cooking automatically the Cook Period can be checked at any time by simply pressing
the Cook Period button.
OTHER NOTES ON TIMER OPERATION
1. When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook
Period button.
2. When cooking Automatically the End Time can be checked at any time by simply pressing the End Time
button.
3. Having set a Cook Period and End Time an electronic device stores the information. The device within the
timer will switch the oven(s) on and off at the required times.
4. When setting an Auto Cooking Programme and a mistake is made, to clear:–
(a) Press and hold in the “Cook Period” button.
(b) With the Cook Period button still held in, return the display to
A
U
T
O
by pressing the “–” button.
(c) Release the “Cook Period” & “–” buttons, and the display will revert to the time of day and the “Auto”
symbol will flash.
(d) Press & release the “Manual” button.
(e) Start the sequence again.
5. If at any time the display shows three flashing zero’s 0.00. It is likely that the electricity supply to the oven
has been interrupted. Reset the timer to the correct time of day.
Food in the oven may, therefore, not have been cooked, before serving check food is thoroughly heated
and completely cooked.
6. To set each function always press and hold the required function button and at the same time press “+” or
“–” buttons.
Note:
14
Between the hours of 22.00 & 06.00 the display dims to prevent glare.
However, if you should operate a button during this period, the timer will return to normal
brightness for a few seconds and then dim again.
GRILL
PAN & HANDLE
The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
(d)
(a)
(c)
(b)
Step 1
Step 1
Step 2
Step 3
Step 4
Step 2
Step 3
Step 4
Remove screw & washers from the grill pan bracket (a).
Tilt the handle over the recess (b).
Slide it towards the centre of the pan (c).
Locate the handle over the bracket (d).
For a fixed handle, replace screw & washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace screw &
washers.
Note: If a fixed handle is required, the grill pan is unable to be kept in the main oven with the
door closed but may be stored in the top oven with the door closed.
GRILL PAN FOOD GRID AND ANTI-SPLASH TRAY
GRILL PAN
GRILL PAN
FOOD GRID
ANTI-SPLASH
TRAY
Note: To stop fat splashing onto the grill mesh, it is important to use the anti-splash
tray as shown in the grilling chart. Always clean the grill pan, anti-splash tray and food grid
after each use.
TOP OVEN SHELF POSITIONING FOR GRILLING
ENSURE SHELVES ARE FITTED CORRECT WAY UP.
3
2
1
3
2
1
SHELF POSITIONS 2 OR 3
TO BE USED FOR
GRILLING.
DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE OVEN FLOOR
NOTE:
Ensure oven timer is set to Manual.
Preheat the grill if indicated on grill chart.
The grill pan must be placed on the correct shelf and positioned centrally under the grill
element.
Leave the control at 6 for toast, and for fast cooking of foods.
For thicker foods requiring longer cooking, turn the switch to a lower setting after the initial
sealing on both sides at 6. The thicker the food, the lower the control should be set.
DO NOT line the grill pan with aluminium foil, as this increases the amount of fat spitting
which can cause a fire.
After use always return both controls to their OFF (0) position.
15
USING THE TOP OVEN FOR SOLARPLUS
GRILLING
Your cooker is not fitted with a conventional grill. Creda have developed a Solarplus
high speed grill which is designed to reduce your grilling times. It is quicker because it
takes less time to warm up from cold. Conventional grills require 5 minutes pre-heat
before food is placed beneath them, but for normal grilling the Solarplus grill can be
used directly from cold without any pre-heat.
However, when toasting, optimum performance is achieved by pre-heating the
grill for about 1 minute.
Note: You will notice that the grill elements are protected by a wire mesh. This stops you
from touching live parts.
DO NOT under any circumstances insert objects into the grill mesh as this could damage
the element wire, break the glass tubes or if the grill is on, cause electric shock.
During use the mesh may become soiled. Care must be taken to ensure the grill
mesh is not distorted – do not store the grill pan handle on the food grid when
the shelf is in the highest position.
16
OPERATION WHEN USING THE TOP OVEN
FOR GRILLING
GRILL SETTING CONTROL
A
B
TIMER
TOP OVEN TEMPERATURE
AND GRILL SELECTION CONTROL
Step 1 Ensure oven timer is set to manual.
Place the shelf in the correct position (see Grilling Guide).
Place the food/grill pan on the shelf, positioned centrally under the grill
element.
Leave the top oven door fully open.
Step 2 Turn knob (B) clockwise to select grill function setting:
Set to:
Half
Grill
For Half Grill (Left hand side only).
Full
Grill
For Full Grill.
NOTE: As you turn past the end of the oven temperature scale you will feel resistance on the
knob – continue turning clockwise until the grill setting position is selected.
Step 3 Turn knob (A) clockwise to select the Grill Setting (1–6). (1=Low, 6=High).
Grill Controls Example:
Full
Grill
= Full Grill Function
6
Full
Grill
6 = High Grill Setting
NOTE:
Do not grill with the grill/top
oven door closed.
Step 4 After use, turn both controls A & B
anti clockwise to their off (0) position.
DOOR POSITION
FOR GRILLING.
DO NOT allow young children near to the appliance when the grill is in use as the surfaces
get extremely hot.
17
18
GUIDE TO SOLARPLUS GRILLING
Grill pan, antisplash tray and
grid
USING THE TOP OVEN AS A
CONVECTION OVEN
The top oven should be used to cook small quantities of food. The oven is designed so
that the grill element operates at a reduced heat output, this is combined with a heating
element situated underneath the floor of the oven. To ensure even cooking of the food it
is important that cooking utensils are positioned correctly on the oven shelf so that the
element is directly above. As a guide, the front of the utensil should be approx. 100mm
(4”) from the front of the shelf.
Note: Charts are a guide only, to suit personal taste and requirements, it may be
necessary to increase or decrease temperatures by 10oC. It may also be necessary to increase
or decrease cooking times.
SHELF POSITIONING
ENSURE SHELVES ARE FITTED THE CORRECT WAY UP
3
2
1
SHELF POSITIONS 1 OR 2
TO BE USED WHEN USING THE
TOP OVEN AS A
CONVECTION OVEN
DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE OVEN FLOOR
There should always be at least 25mm (1 inch) between the top of the food and
the grill element.
WARNING: Items stored in the top oven will get hot when the main oven is in use.
DO NOT allow young children near to the appliance when the top oven is in use as the
surfaces get extremely hot.
19
OPERATION WHEN USING THE TOP OVEN
AS A CONVECTION OVEN
B
TOP OVEN TEMPERATURE & GRILL SELECTION CONTROL
TIMER
Step 1 Check that the timer is in manual.
Step 2 Place the shelf in the correct position (see Oven Temperature Charts).
Step 3 Select the required cooking temperature (100–220oC) using control (B)
(see Top Oven Temperature Charts).
The pilot light ( ● ) will immediately come on, and remain on until the oven
reaches the required temperature. The light will then automatically go off and on
during cooking as the oven thermostat maintains the correct temperature.
Step 4 Place the food on the shelf directly below the element ensuring the oven door is
closed.
NOTE: At the end of your cooking, always return control (B) to the OFF (O) position.
PLATE WARMING
Place the plates/dishes on shelf position 1 from the base of the top oven, and turn
top oven temperature and grill selection control (B) to 100oC for 10-15 minutes.
Never use the grill setting control (A) when warming plates.
TOP OVEN UTENSILS
Do Not use: Meat Pans and Baking Trays larger than – 225mm x 300mm (9”x12”)
DO NOT use the grill pan or main oven meat pan as a meat pan in the top oven, as
the air circulation will be seriously restricted.
20
USING THE MAIN OVEN FOR FAN COOKING
Since a circulaire fan oven heats up more quickly and generally cooks food at a
lower temperature than a conventional oven, pre-heating is often unnecessary. For
guides on “pre-heating”, “cooking temperatures” and “cooking times” see “Oven
Temperature Charts” later in book.
Note: Charts are a guide only, to suit personal taste and requirements, it may
be necessary to increase or decrease temperatures by 10oC. It may also be
necessary to increase or decrease cooking times.
MAIN OVEN SHELF POSITIONING FOR FAN OVEN
Most foods will cook satisfactorily on any shelf position, due to even distribution of
heat in the main oven, but the shelves must be evenly spaced.
The top oven rod shelf can be used in the main oven when cooking large quantities
of food. (N.B. Maximum 3 shelves in the main oven).
Food or utensils should never be placed directly on the floor of the oven
for cooking.
DO NOT allow young children near to the appliance when the main oven is in use as
the surfaces get extremely hot.
MAIN OVEN UTENSILS
Do Not Use:
Meat Pans larger than
–
Baking Trays larger than –
375mm x 300mm (15”x12”)
325mm x 250mm (13”x10”)
TEMPERATURE & TIME
When all three shelves are in use to cook large quantities of food, it may be necessary to increase the cooking times given in the temperature charts by a few minutes,
to allow for the loss of heat due to extra time taken to load the oven, and the larger
mass of food. Baking trays should have an even gap around the oven.
MAIN FAN OVEN OPERATION
MAIN OVEN TEMPERATURE & FUNCTION CONTROL
C
TIMER
Step 1
Step 2
Step 3
Step 4
Check that the timer is in manual.
Place the shelf/shelves in the correct position (see Main Oven Temperature Charts.
Place the food centrally on the shelf ensuring the oven door is fully closed.
Select the required cooking temperature (80 to 230oC) by turning control (C)
clockwise. The pilot light ( ● ) will immediately come on, and remain on until
the oven reaches the required temperature. The light will then automatically
go off and on during cooking as the oven thermostat maintains the correct
temperature.
Note: When you have finished using your cooker, always return the controls to their OFF (O) position.
At the end of the cooking period there may be a momentary puff of steam when the door is opened.
This will disperse in a few seconds and is a perfectly normal characteristic of an oven with a good door
seal.
21
USING THE MAIN OVEN FOR OTHER
FUNCTIONS
Fan
Only
FAN ONLY SETTING
DEFROSTING FROZEN MEAT & POULTRY
Joints of meat and whole birds should be defrosted slowly, preferably in a refrigerator
(allowing 5-6 hours per lb.) or at room temperature (allowing 2-3 hours per lb.).
Frozen meat or poultry must be completely defrosted before cooking in the oven.
However, to decrease the amount of time required to defrost food items, a non-heating
fan only setting may be selected for the main oven only.
OPERATION: TO ASSIST IN DEFROSTING:
Place food in the oven and close the oven door.
Turn the Main Oven Temperature and Function Control (C) clockwise to the
setting.
Fan
Only
This defrosts by circulating the air around the food, time to defrost will depend on
type and size of the food.
NOTES: DO NOT defrost meat and poultry by warming the food through.
Foods ideally suited to defrosting using the fan only setting are cream/cream cakes,
butter cream filled cakes, gateaux, cheese cakes, iced cakes, quiches, pastries, biscuits,
bread, croissants, fruit and many delicate frozen foods.
If fish, meat and poultry are to be defrosted using the fan only setting, where possible it is
recommended that the food should be small & thin.
The items should be placed so that the maximum amount of surface area is exposed to
the circulating air, and that they are turned regularly to ensure even defrosting.
Larger cuts of meat and poultry may be defrosted by using the fan only setting up to a
maximum weight of 2 kg (4lb 8oz).
It is important to wash both meat and poultry and cooking utensils immediately after
defrosting and before cooking. Food should be cooked immediately after defrosting.
It is very important to strictly adhere to the basic principles of food handling and hygiene to
prevent the possibility of bacterial growth.
Oven
Light
LIGHT ONLY SETTING
When the Main Oven Temperature & Function Control (C) is turned clockwise to
the Oven setting, the main oven light only will illuminate.
Light
22
USING THE MAIN OVEN FOR OTHER FUNCTIONS
90
“SLOW” SETTING
This is used for slow cooking, keeping food warm and warming plates for short
periods. Extra care should be taken when warming bone china, as it may be
damaged in a hot oven.
DO NOT place food or plates directly on the oven floor as this could damage both the oven
lining and the plates which are being warmed.
ADVANTAGES OF SLOW COOKING ARE:
The oven stays cleaner because there is less splashing.
Timing of food is not as critical, so there is less fear of overcooking.
Inexpensive joints of meat are tenderised.
Fully loading the oven can be economical.
Cooking times can be extended in some cases by up to 2 hours.
The kitchen stays cooler.
OPERATION:
1.
2.
Place the prepared food in the main oven and ensure the door is fully closed.
Select 90 (Slow Cooking Temperature) by turning Main Oven Temperature &
Function Control (C) clockwise ensuring the oven door is fully closed.
STORAGE & RE-HEATING OF FOOD:
1.
2.
3.
4.
If food is to be frozen or not used immediately, place it in a clean container
and cool as soon as possible.
Always thaw frozen food completely in the refrigerator before re-heating.
Always reheat food thoroughly and ensure it is piping hot before serving.
Only re-heat food once.
POINTS TO CONSIDER WHEN PREPARING FOOD FOR SLOW COOKING
1.
Make sure that the dishes to be used will fit into the oven ensuring enough room for air to
circulate.
2. All dishes cooked on the slow setting will require a minimum of 6 hours, however, if they
are cooked for 1-2 hours longer then deterioration in their appearance may be noticed.
3. Never cook joints of meat over 2.7kg (6 lb) or poultry over 2.0kg (4lb 8oz).
We do not recommend that joints of meat or poultry are stuffed before cooking on
the slow setting.
4. To seal in the meat juices, always cook meat or poultry at 170oC for 30 minutes before
wrapping in foil and placing on a rack over a tin (to allow good air circulation) before
turning the control to the slow setting and cooking immediately.
5. Always ensure that joints of pork and poultry are thoroughly cooked by checking with a
meat thermometer before serving.
6. Always thaw frozen foods completely before cooking. We do not recommend placing
frozen food in the oven to cook.
7. Always bring soups, liquids and casseroles to the boil before placing in the oven.
8. Ensure that casserole dishes have a good seal (not airtight) and cover to the top with foil to
prevent loss of moisture.
9. Ensure that fruit and vegetables are cut into even sized small pieces to cook properly.
10. Always adjust seasoning before serving.
11. If using dried red kidney beans it is important that the beans are soaked and then
boiled for a minimum of 10 minutes before using in any dish to destroy any toxins.
12. When cooking fish or egg dishes it may be necessary to check during cooking to avoid
overcooking.
23
TEMPERATURE CONVERSION SCALE
F
Main
Conventional
Oven
Top
Convection
Oven
Main
Fan
Oven
/2
250
120
110
100
1
275
140
130
120
2
300
150
140
130
3
325
160
150
140
4
350
180
170
160
5
375
190
180
170
6
400
200
190
180
7
425
220
210
200
8
450
–
220
210
9
475
–
–
220
Gas
Mark
1
24
o
150
140/150
No
No
No
No
No
No
No
No
Beef
Lamb
Pork
Veal
Chicken/Turkey
up to 4kg (8lb)
Turkey up to 5.5kg
(12lb)
Turkey over 5.5kg
(12lb)
Casserole Stews
150/160
160/180
160/170
160/180
160/180
160/180
Preheat
Temperature
o
C
Yes
Yes
Pork
(Foil Covered)
Veal
(Slow Roasting)
25 mins per 450g (1lb)
+ 25 mins extra
25-30 mins per 450g (1lb)
+ 25 mins extra
11⁄2 - 2 hours
12 mins per 450g (1lb) e.g.
10kg (22lb) = 264 mins
13-15 mins per 450g (1lb) e.g. 5kg
(11lb) = 143-165 mins
190/200
150
Yes
170/180
Yes
Yes
190/200
170/180
190/200
170/180
190/200
170/180
Temperature
o
C
2 -21⁄2 hours
25-30 mins per 450g (1lb)
25-30 mins per 450g (1lb)
+ 25 mins over
40-45 mins per 450g (1lb)
40-45 mins per 450g (1lb)
+ 40 mins over
40 mins per 450g (1lb)
40 mins per 450g (1lb)
+ 40 mins over
35-40 mins per 450g (1lb)
35 mins per 450g
(1lb) + 35 mins over
Time
(approx.)
Top Oven Convection Cooking
Rare 60OC
Medium 70OC
Beef
Well Done 70OC
90OC
Pork
80OC
Lamb
90OC
Poultry
75OC
Veal
The most accurate method of testing the readiness of joints of meat or whole poultry is to insert a meat thermometer into
the thickest part of a joint of meat, or the thickest part of poultry thighs, during the cooking period. The meat
thermometer will indicate when the required internal temperature has been reached.
1. Never allow foil to touch sides of oven. 2. Never cover interior with foil. 3. Never cover shelves with foil.
IF USING ALUMINIUM FOIL
Small joints of meat up to 1.5Kg (3 lbs) and poultry up to 3.6Kg (8lbs) can be roasted in a small meat pan in the top oven.
Casserole Cooking
Poultry/Game
(Foil Covered)
Poultry/Game
(Slow Roasting)
Yes
Yes
Pork
(Slow Roasting)
25 mins per 450g (1lb)
+ 25 mins extra
Veal
(Foil Covered)
Yes
Beef/Lamb
(Foil Covered)
20-25 mins per 450g (1lb)
+ 20 mins extra
18-20 mins per 450g (1lb)
+ 20 mins extra
Yes
Preheat
Beef/Lamb
(Slow Roasting)
Meat
Food
Time
(approx.)
Note: Up to three shelves may be used in this oven. The position of
these is not important providing they are evenly spaced.
Main Fan Oven Cooking
Meat
Food
OVEN TEMPERATURE CHARTS – MEAT
COOKING MEAT/POULTRY IN THE TOP OVEN
25
Shelf 1
Position from
Base of Oven
26
Main Fan Oven Cooking
Yes
No
No
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Yes
No
Scones
Small Cakes
Victoria Sandwich
Sponge Sandwich
(Fatless)
Swiss Roll
Semi-rich
Fruit Cake
Rich Fruit Cakes
Shortcrust
Pastry
Puff Pastry
Yorkshire Pudding
Individual Yorkshire
Pudding
Milk Pudding
Baked Custard
Bread
Meringues
70/90
200/210
140/150
130/140
190/200
180/190
190/200
190/200
130/140
140/150
180/200
170/190
160/170
170/180
210/220
Temperature
o
C
3-4 hours
20-30 mins
35-45 mins
11⁄2-2 hours
20-45 mins
40-45 mins
Time depending on use
Time depending on use
Time depending on use
11⁄4-11⁄2 hours
Yes
Yes
Yes
Shortcrust
Pastry
Puff Pastry
Yorkshire Pudding
Meringues
Bread
Baked Custard
Milk Pudding
Yes
Yes
Yes
Yes
Yes
Yes
Rich Fruit Cakes
Individual Yorkshire
Pudding
Yes
Yes
Semi-rich
Fruit Cake
Swiss Roll
12-15 mins
Yes
Victoria Sandwich
Yes
Yes
Small Cakes
15-20 mins
210/220
Yes
Scones
100
200/210
150/160
140/150
200/210
190/200
200/210
190/200
140/150
150/160
200/210
180/190
170/180
180/190
Temperature
o
C
Preheat
150-180
30-45
40-50
90-120
20-30
30-40
Depending
on size
Depending
on recipe
Depending
on recipe
7 inch - 65-70
10-15
20-25
20-30
20-25
10-15
Time in Mins
Shelf 2
Shelf 1
Shelf 1
Shelf 2
Shelf 2
Shelf 2
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Shelf 1
Position from Base
of Oven
Top Oven Convection Cooking
Food
Sponge Sandwich
(Fatless)
20-25 mins
15-25 mins
9-12 mins
Time
Baking
Note: If soft tub margarine is being used for cake making, we would recommend using the all in one method and to reduce the
temperature by 10OC. Temperatures recommended in this chart refer to cakes made with block margarine or butter only.
Preheat
Note: Up to three shelves may be used in this oven. The position of
these is not important providing they are evenly spaced.
Food
Baking
OVEN TEMPERATURE CHARTS – BAKING
COOKING RESULTS NOT SATISFACTORY
GRILL
Uneven cooking front to back
Ensure that the grill pan is positioned centrally below
the grill element.
Fat splattering
Ensure that the grill pan is not lined with foil.
Ensure that the grill setting control (A) is not set too high.
If Solarplus grill – use anti-splash tray supplied under the food
support.
BAKING GENERAL
Uneven rising of cakes
Ensure that the oven shelves are level.
Sinking of cakes
The following may cause cakes to sink:
1. Pre-heating of fan ovens – not always necessary.
2. Cooking at too high a temperature – reduce standard
temperatures by 25oC for fan ovens.
3. Using normal creaming method with a soft margarine.
If using soft margarine, use an all in one method instead of
the traditional creaming of the margarine and sugar.
Remember when using a food mixer or processor not to
over-cream soft margarine.
Over/undercooking
Refer to the cooking times and temperatures given in
the Oven Temperature Charts provided, however, it may be
necessary to increase or decrease temperatures by 10°C to suit
personal taste.
Do not use utensils greater than 56mm (2l⁄4'') in height
for roasting.
TOP OVEN BAKING
Uneven cooking front to back
Ensure that the cooking utensil is at least 100mm (4")
from the front of the shelf.
Uneven rising
Ensure that the shelf is level (as above) and that the food is
positioned correctly in the oven.
Overcooking
Remember to reduce cooking temperatures by 10°C from
standard recipes when using the top oven.
Food is taking too long to cook
Ensure that the cooking utensil used in the top oven is not larger
than 300mm x 225mm (12"x 9"), e.g. Do Not use the main oven
meat pan.
Only cook one item at a time to avoid overloading the oven.
27
CARE AND CLEANING
Warning: Before cleaning, please ensure that the electricity supply to the appliance is switched off
and the appliance is fully cold.
1. “CREDACLEAN” OVEN LINERS
(a) How "Credaclean" works.
TOP OVEN SIDE LINERS
The surfaces of the "Credaclean" oven liners are
treated with a special vitreous enamel which absorbs
cooking soils. At temperatures of 220°C (425°F) or
above, the special surface enables these soils to be
slowly destroyed.
The higher the temperature the more effective it is.
(b) Cleaning.
MAIN OVEN SIDE LINERS
AND REAR PANEL
In most cases normal cooking operations at 220°C
(425°F) will permit this cleaning operation to proceed
during cooking. However if higher cooking
temperatures are not used regularly, it may be
necessary, in order to prevent heavy soiling, to run
the ovens without shelves or meat pan, at a maximum
setting for a couple of hours.
It should not normally be necessary to clean the
"Credaclean" panels with water. If the user feels it is
desirable to do so, wipe them over with a clean,
soapy cloth, followed by a wipe with a clean damp
cloth.
DO NOT use biological washing powder, harsh abrasives or
chemical oven cleaners of any kind as this could damage the
“Credaclean” oven liners.
28
CARE AND CLEANING
2. CLEANING GRILL, TOP OVEN AND MAIN OVEN
(a) Base & Rear of Top Oven and Base of Main Oven.
Wipe out the oven with a damp soapy cloth. For more
stubborn stains on the base of the oven use a well
soaped fine steel wool soap pad.
REMOVABLE GRILL ROOF PANEL
(NOT ALL MODELS OR MODELS
FITTED WITH SOLARPLUS GRILL)
OVEN
SHELVES
MAIN
OVEN
BASE
GRILL
PAN
BASE &
REAR
MEAT
PAN
(b) Grill Pan, Meat Pans & Oven Shelves.
To prevent stains from being burnt on to the grill pan,
food support and rod shelf, always wash immediately
after use in hot soapy water.
Use a well soaped fine steel wool soap pad to remove
stubborn stains from the rod shelves, grill pan, meat
pan and the base of the oven.
DO NOT use aerosol cleaners on this oven as they could
adversely affect the fan motor unit, and cannot be wiped
off the fan blade.
(c) Removable Grill Roof Panel (not all models).
Pull grill roof panel out slowly, being careful not to
damage the elements. Clean using a damp soapy
cloth, if stubborn stains remain gently clean with a
well soaped fine steel wool soap pad and soapy water,
and then wipe over with a damp cloth.
(d) Solarplus Grill
To clean the Solarplus grill, use a clean, damp, soapy
cloth and wipe over. If stubborn stains remain, gently
clean with a well soaped nylon scouring pad and wipe
over with a damp cloth.
DO NOT use metal cleaning utensils, wire wool or
proprietary oven cleaners on the grill element mesh.
29
CARE AND CLEANING
3. OVEN DOORS
(a) Control Panel
CONTROL PANEL
Regularly wipe with a clean, damp cloth and polish with
a clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent any
build up of soiling which may detract from the appearance
of the cooker. The recommended method of cleaning is
to wipe over the trims with a clean, soft cloth wrung out
OVEN in hot water, or mild non abrasive cleaner.
DOORS (If in doubt try the cleaner on a small area of trim which is not
noticeable in normal use), then after wiping with a cloth wrung
out in clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed.
Stubborn stains can be removed by using a well soaped,
fine steel wool soap pad.
TRIMS
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
4. REPLACEMENT OF THE OVEN LAMP
TOP OVEN LAMP (NOT ALL MODELS)
Warning: Before removing lamp lens, please ensure that the
electricity supply to the appliance is switched off and the appliance is fully cold.
Open the oven door and remove the oven shelves. Using
a thick cloth, grip the lamp lens, unscrew anti-clockwise
and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit replacement bulb
(15W 300°C SES). Fit replacement bulb and refit lens.
MAIN OVEN LAMP
5. HOW TO CLEAN THE LAMP LENS
TOP OVEN LAMP (NOT ALL MODELS)
Warning: Before cleaning lamp lens, please ensure that the electricity supply to the appliance is switched off and the appliance
is fully cold.
Open the oven door and remove the oven shelves. Using
a thick cloth, grip the lamp lens, unscrew anti-clockwise
and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
MAIN OVEN LAMP
30
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens
CARE AND CLEANING
Take particular care not to damage the inner surface of the door inner glass that
is coated with a heat reflective layer. Do not use scouring pads, or abrasive powder, which will scratch the glass. Ensure that the glass panel is not subjected to
any sharp mechanical blows.
Stubborn stains can be removed by using a fine steel wool pad. For slight soiling the
inner glass panel may be cleaned, while still warm, without removing it from the door.
After cleaning, rinse and dry with a soft cloth.
CLEANING THE DOORS
SIDE OPENING DOORS
Cleaning the door glass is the same as the drop down doors, except take care to
support the weight of the inner glass when removing and refitting.
DROP DOWN DOORS
Remove the door inner glass as follows.
1.
Open the door fully and unscrew the two screws securing the glass panel
so that the securing brackets can be turned. There is no need to remove
the screws completely.
2.
Turn the brackets so that the glass can be
removed and cleaned at the sink (Fig. 1.)
Fig. 1.
Glass
3.
The inside of the outer door glass can now be cleaned while still fitted to
the cooker.
NEVER OPERATE THE COOKER WITHOUT THE INNER DOOR GLASS
IN POSITION.
Refit the door inner glass as follows.
1.
NOTE: The inner door glass has a special reflective coating on one side.
Replace the door inner glass so that the statement: “IMPORTANT THIS
FACE TOWARDS THE OVEN” can be read from the inner side of the door.
2.
Turn the two securing brackets back to their
original position to retain the glass and
tighten the screws. (Fig. 2.)
Fig. 2.
Glass
31
INSTALLATION
ELECTRICAL REQUIREMENTS
For your own safety, we recommend that your cooker is installed by a competent
person such as one who is registered with NICEIC (National Inspection Council for
Electrical Installation Contracting). The cooker should be installed in accordance
with the latest edition of the IEE Regulations.
Warning: This appliance must be earthed.
ELECTRICAL CONNECTIONS
The installer must check that the voltage shown at the rating plate corresponds
with the house electricity supply.
The oven must be supplied via a suitable double pole isolating switch, having a
contact separation of at least 3mm in all poles placed in a readily accessible
position adjacent to the unit.
If the oven is to be wired into a connector unit, this may be positioned behind the
oven providing the following requirements are met:
i) The connector unit must not project from the wall more than 25mm.
ii) The top of the connector must not be more than 350mm above the base of the
oven recess.
Remove the terminal cover at the rear base of the oven. Pass the cable through the
cable clamp and connect to the appropriate terminals provided.
Allow sufficient cable so that the oven can be set down on the floor whilst still
connected.
Tighten the screws on the cable clamp and replace the terminal cover.
Make main connections.
This appliance conforms to B.S. EN 55014 regarding suppression of Radio and
Television reception interference.
Where a double oven is used, a 20 amp Double Pole control switch should be used to
feed the unit using a suitable rated cable.
Where a hob is fitted adjacent to an oven, a 45 amp Double Pole control switch
should be used to feed both units via separate suitably rated cables.
We recommend a minimum of 4mm2 PVC insulated twin and earth cable
conforming to B.S. 6004 for connection of each appliance.
This appliance must not be installed over any other appliance that generates heat.
Note: Due to many different types of installation, a mains cable is not supplied
with this product. The installer will fit the correct type and length of cable.
32
INSTALLATION
IMPORTANT
It is essential that the lower cupboard is constructed in the manner illustrated i.e.
having side, back, and roof panels so joined as to provide no apertures which could permit
access to the oven unit when installed.
1. GENERAL
The appliance is designed for mounting at a safe level into an oven housing which must be
secured to the backing wall.
2. VENTILATION
a. The oven housing unit cabinet dimensions must comply with fig. 4.
b. An air gap of 50mm minimum must be provided at the rear of any top or bottom
cupboards or shelves (see fig. 1).
c. It is necessary that the cabinets are provided with unobstructed ventilation, i.e.
from adjacent cabinetry. This can be done by either raising the base of the
cabinets using the adjusting feet (or spacers) or alternatively by providing a
slot in the cabinet plinth to the dimensions in fig. 1.
d. The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where
it is intended to fit cupboards above the oven unit to ceiling height, it is essential that
the warmed air is exhausted through the front of the cabinet (see fig. 1).
e. If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven
when the door is opened could condense on and maybe stain the adjacent surface. To
prevent permanent staining, the adjacent surface should be made of a material that is
heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the
oven housing cabinet.
3. FINAL INSTALLATION
a. Using a spirit level, check that the housing cabinet is level from side to side and from
front to back in its installed position.
b. Correct any unevenness by placing spacers under the bottom of the cabinet.
Make sure that the cabinet rests firmly on the floor without rocking.
c. Before the oven is fitted, the cabinet must be firmly secured to the backing wall for
stability.
d. The oven unit should now be lifted (this is a two person lift) into the cabinet and
pushed fully home.
e. Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head
screws - two through each side trim.
f. Remove all packaging material from the grill and oven interior.
LIST OF LOOSE ITEMS
4 x Pozi Wash Head No. 6 x 15mm screws.
33
TALL CABINET VENTILATION
Figure. 1
Ventilation Slot required
here if cabinet does not
fit to ceiling -51mm x 457mm min. area
50mm
Air Gap
Ventilation Slot
required
here if the cabinet
does fit to the ceiling 51mm x 457mm min.
area
50mm
Air Gap
Ventilation Slot
required here
51mm x 457mm
min. area
34
560mm
Viewed down through
cabinet
577mm le
d
exc. hans
knob
Fig. 3
560m
m
887mm
Cabinet
No. 6 x 15mm screw
(4 supplied)
875mm
Oven Door
597
mm
mm
550
Fig. 2
887mm
878mm if
cooker
trim
is to
overlap
top edge
of shelf
560574m
m
Connector
Box
mm
550 *
min
4mm
Cable
To Oven
2
6mm2
Cable
if hob fitted
4mm2 Cable
to Hob if
fitted
Fig. 4
* excluding pipe work
and other projections
35
SOMETHING WRONG?
Before calling a Service Engineer, please check through the following lists.
THERE MAY BE NOTHING WRONG.
Problem
Check
Nothing works.
(a) Check
If you find :Display is blank.
Then it is likely that there is no electricity supply to your oven.
Check:
(i) That the main cooker wall switch is turned on.
(ii) Check other appliances to see if you have a power
cut.
(iii) Check the main circuit breaker for the property.
Display shows 0.00 AUTO.
The power supply to your oven has possibly been interrupted, but has
now come back on again. Reset the timer to the correct time of day and
"Manual" operation using instructions given in the timer
section of the book.
Main & Top Ovens do not work, but
the Grill works.
Check the following to ensure that the timer is in Manual Mode:
Check that the Auto Symbol is not lit up and is not flashing.
See timer section for instructions on how to return timer to
"Manual".
Top Ovens and Grill do not work,
but the Main Oven works.
Operating the cooker under the following conditions may cause a
safety device to operate.
(a) Grilling with the door closed - always grill with the door open
to the correct position - see grilling.
(b) Grilling for an excessively long period at maximum setting see grilling guide.
(c) Grilling with inadequate ventilation in the cabinet - see
installation instructions.
Grill does not work.
Check that you have selected :- "Grill" function on the "Top/Oven Grill
Select" knob (B) and a Grill setting on the "Grill" knob (A) - see
grilling page.
Grill keeps turning on and off.
When the "Grill" control (A) is operating at less than "6", the grill will cycle
on and off, this is normal and is not a fault.
Can not set an “Auto Cook” programme
Remember: "Cook Period" is the actual length of time for which, the
timer will switch the oven(s) on as part of an "Auto Cooking"
programme.
Draught from beneath control
panel.
A gentle flow of air will be blown from beneath the control panel when the
appliance is used. If the appliance is still warm, this
cooling fan may run on, or restart itself after all of the controls have
been turned off.
The fan will stop once the appliance has been cooled. This is normal
and not a fault.
Control panel illumination remains
on, or comes on again, after the
controls have been turned off.
The control panel illumination is on the same circuit as the cooling fan (see
above). If the cooling fan runs on, or restarts due to the appliance still being
warm, then the display will remain/become illuminated to indicate that the
appliance is still warm. The fan will stop and the illumination will go off,
once the appliance has been cooled.
This is normal and not a fault.
Timer buzzer/bleeper operates
continually
Buzzer/Bleeper should stop automatically after 2 minutes. If not,
press minute minder button to silence.
If you have been through the above list and there is still a problem; You should identify your Service
Agent using the list on the back page and contact your Local Service Office.
36
Key Contacts
Service
Creda has the largest appliance manufacturer’s service team in Europe, trained
specialists directly employed by us to ensure your complete confidence.
Repair Service
UK: 08709 066 066
Republic of Ireland: 1850 302 200
You will be asked for the following information:Name, address and postcode.
Telephone number
Model / Serial number of the appliance
Clear and concise details of the query or fault
Place and Date of purchase
(Please keep the receipt as evidence will be required when the engineer calls).
Extended Warranty
To join: UK 08709 088 088
Republic of Ireland: 1850 502 200
Genuine Parts & Accessories
Mail Order Hotline
UK: 08709 077 077
Republic of Ireland: (01) 842 6836
For further product information
08701 546474
All Creda Services are offered as an extra benefit and do not affect your statutory rights.
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB
PRINTED BY SIMLEX . FOUR ASHES, WOLVERHAMPTON.
October 2002 Part No. 4866200136-01