CONDITIONED POWER DISTRIBUTION
20 AMP PRO SERIES
SEQUENTIAL POWER UP / POWER DOWN
PD11LVSP
ETA’s line of Conditioned Power Distribution units are designed to reduce
damage to sensitive electronic equipment from sudden voltage spikes, damaging power surges, and EMI/RFI
noise, which is inherent in utility power
lines.
Power line sources which are not
preconditioned or filtered can affect
reliable operation of sensitive audio,
computer, and other electronic equipment, and may cause premature
failure, expensive repairs, or unanticipated replacement from non-repairable damage.
The sequencing units are designed
to protect and filter electronic equipment that requires a time-delayed
power up and down; particularly
when high in-rush current can damage
mixers, processors and amplifiers
when powering up.
ETA QUALITY
STANDARD FEATURES:
PD11LVSP
SPECIAL FEATURES:
• Incoming power spike and surge
protection and noise filtration
• Protected U-grounded power
outlets
• 12-gauge, 3-prong, 10-foot power
cord, 20-amp capacity
• One rack space high
• Three year limited warranty
• ETL listed
• Microprocessor monitored sequential
power distribution system
• Four power up/down steps or stages
of distributed and conditioned power
• Four pre-set power up/down intervals
of 1, 5, 10 or 30 seconds
• Optional manual setting for up to
240 seconds between intervals
• One dual 20 amp U-grounded outlet
per stage
• One “always on” dual 20 amp
U-grounded outlet on back panel
• Full 20 amps, 2400 watts capacity
per unit
• Protected "always on" 15 amp
AC power outlet on the front panel
• Total unit 20 amp and 15 amp outlet
circuit breakers located on front panel
• Three-stage spike and surge protection
• Two-stage EMI/RFI filtration
• Ground and AC line fault check
APPLICATIONS:
• Live Productions
• Sound Reinforcement
• Professional, Permanent
Installations
• Recording Studios
• Theatres
• Clubs
• Schools, Churches
• Business Board Rooms
• Audio-Visual Multi-use
Presentation Rooms
• Tours
• Bands, DJs
• A-V Racks
• Computer Networks
• Home Entertainment Centers
REMOTE OPERATION:
• Access to remote feature is internal
to 3 PC board mounted screw terminals for simple 3-wire hook-up. Requires
user provided L.E.D. and switch.
™
®
SYSTEMS
T h e ␣
P o w e r ␣
J u s t ␣
K e e p s ␣
O n ␣
C o m i n g
MODEL PD11LVSP : CONDITIONED POWER DISTRIBUTION – SEQUENTIAL POWER UP / POWER DOWN
SPECIFICATIONS:
Dimensions
Weight
Housing Quality
Electrical
Max. amps
Max. watts
Max. front outlet
Spike/surge protection
Clamping level
Response time
Max. surge voltage
Max. surge current
Max. spike energy
Noise attenuation
Certification
19" L x 10" D x 1 3/4" H
10 lbs.
Black powder coated chassis, black anodized
aluminum front panel
120V, 50/60 Hz, single phase
20/unit
2400/unit
15 amps
Line to neutral, neutral to ground, line to ground
200V peak
1 nanosecond
6000V
26,000 amps
630 joules total
Transverse > 20 dB, 1.5 kHz to 200 mHz
ETL listed
EASY 4-STEP BULB REPLACEMENT 120 volt 4 watt bulb (Christmas tree bulb)
1. Twist cap clockwise
3. Replace bulb
2. Release bulb & socket
4. Replace socket, turn cap counter-clockwise
PD11LVSP FEATURES
• Microprocessor monitored sequential
power distribution system
• 4 power up/down steps or stages of
distributed and conditioned power
• 4 pre-set power up/down intervals
of 1,5,10, or 30 seconds
• Optional manual settings for up to
240 seconds between intervals
• One dual 20 amp U-grounded outlet
per stage
• One “always on” dual 20 amp
U-grounded outlet on back panel
• Full 20 amps, 2400 watts capacity
per unit
• Protected "always on" 15 amp AC power
outlet on the front panel
• Total unit 20 amp and 15 amp outlet
circuit breakers located on front panel
• Digital voltmeter readout
• Dual swivel rack high output illuminators
with High/Low settings and easy-tochange bulb accessibility
• 3-stage spike and surge protection
Stage 1: surge suppression diodes
Stage 2: metal oxide varistors (MOVS)
Stage 3: gas discharge tube
• 2-stage EMI/RFI filtration
• Ground and AC line fault check
• 1 rack space
• 3 year limited warranty
®
®
TM
SYSTEMS
A Creative Light & Sound Company
Division of National Biological Corporation
1532 Enterprise Parkway • Twinsburg, Ohio 44087
330-425-3388 • 800-321-6699 • Fax: 330-425-9700
http://www.etasys.com E-mail eta@etasys.com
All designs and specifications are subject to change without notice.
Copyright © 1999 ETA Systems.
2/99
5FP-070-LIT