Con-Tact 08F-C8A34-04 Use and Care Manual

CON-TACT LINER
GRIP PRINTS
Non-Adhesive
SURFACE PREPARATION
Clean surfaces prior to application as necessary.
All surfaces should be dry, clean, and smooth.
CAUTION
Not for use on lacquered or urethane surfaces. Finish damage may occur.
Care should be taken when placed on latex semi-gloss and gloss paints.
Painted areas must be completely cured otherwise the liner may stick to the surface.
Cool and/or humid conditions required a longer curing time.
APPLICATION
Measure area to be covered
Cut to desired size and/or shape
CLEANING AND MAINTENANCE
Washable
Clean by simply wiping the surface with a damp cloth. Mild soap can be used if
necessary.
Hand wash
Do Not Wring
Lay flat to dry
La Mirada, CA
tel. 714-736-1000
fax. 714-736-2078
customer service. 800-321-1741
email. contactus@kittrich.com