Con-Tact 04F-C6421-06 Use and Care Manual

CON-TACT LINER
SPECIALTY COVERINGS
Self Adhesive
SURFACE PREPARATION
Clean surfaces prior to application as necessary
All surfaces should be dry, clean, and smooth
APPLICATION
Measure area to be covered
Carefully cut to fit using the lines on the backing paper as a guide
To insure a clean cut, cut with sharp scissors or a razor
Start at a corner and peel off the backing paper to apply
Smooth from center out to help eliminate bubbles of air
CLEANING AND MAINTENANCE
Clean by simply wiping the surface with a damp cloth and mild soap if necessary
La Mirada, CA
tel. 714-736-1000
fax. 714-736-2078
customer service. 800-321-1741
email. contactus@kittrich.com