Portable CD-R/RW Player
with AM/FM Stereo Radio
and Cassette Recorder
OWNER’S MANUAL
PD9814
Visit our web site at www.emersonradio.com
PD9814_053105.p65
26
31/5/2005, 10:31
CAUT I ON
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
!
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(ser vi ci ng) instr ucti ons in
the liter ature accompanying the appl iance.
IMPORTANT SAFETY INSTRUCTIONS
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
Do not overload wall outlet. Use only power source as indicated.
Use replacement parts as specified by the manufacturer.
The product may be mounted to a wall only if recommended by the manufacturer.
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
1
PD9814_053105.p65
1
31/5/2005, 10:31
BEFORE WE BEGIN
Thank you for purchasing this Emerson audio product. The Emerson brand
is your assurance of quality, performance and value.
Our engineers have included many useful and convenient features in this
product. Please be sure to read this Owner’s Manual completely to make
sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and
standards of workmanship. It was tested by Emerson inspectors and found
to be in perfect working order before it left our factory. However, there is
always the chance that some problem may occur because of rough handling
during shipment to the retail store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation
of this product, please refer to the instructions for obtaining service at the
end of this Manual. Emerson and Emerson retailers are committed to your
satisfaction.
Once again, thanks for purchasing this Emerson audio product.
2
PD9814_053105.p65
2
31/5/2005, 10:31
IMPORTANT NOTES
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.
• Operate controls and switches as
described in the manual.
• Before turning ‘On’ the power, make
certain that power cord is properly
installed.
• Store your CDs, cassettes in a cool area
to avoid damage from heat.
• When moving the set, be sure to first
disconnect the power cord.
• Do not attempt to clean this unit with
chemical solvents as this might damage
the finish. Use a clean dry cloth.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
3
PD9814_053105.p65
3
31/5/2005, 10:31
PREPARATION FOR USE
Unpacking and Set Up
•Carefully remove the unit from the carton and remove all packing materials from
the unit.
•Carefully remove any small strips of tape which may have been used to keep
the CD and Cassette doors closed during shipment.
•Open the CD compartment by lifting up the OPEN/CLOSE tab on top panel.
Inside the CD compartment you will see a “dummy” CD protection card which is
used to prevent the laser pick-up from moving during shipment. Carefully remove
this card and close the CD compartment door.
•Please save the carton and packing materials in the event that your unit ever
needs to be returned for service. The original carton and packing materials are
the only way to protect the unit from damage during shipment.
Power Sources
This unit is designed to operate on 8 UM-2 “C” batteries, not included, or on normal
120V 60Hz AC house current. Operating this unit from any other power source
may cause damage to the unit, and such damage is not covered by your warranty.
4
PD9814_053105.p65
4
31/5/2005, 10:31
AC Operation
Connect the small end of the AC Power Cord to the AC socket on the back cabinet,
then insert the plug in any convenient household 120V 60Hz AC outlet.
Note:
This unit has a polarized AC plug with one wide blade and one narrow blade. This
plug will only fit into a matching polarized AC outlet. This is a safety feature to
reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you
probably have an outdated non-polarized outlet. You should have your outdated
outlet changed by a qualified, licensed electrician. Do not file the wide blade on the
plug, or use an adapter to make the plug fit into your outlet. This defeats the safety
feature and could expose you to electric shock.
AC Outlet
AC Plug
5
PD9814_053105.p65
5
31/5/2005, 10:31
Battery Operation
1.) Remove the battery compartment door on the bottom of the cabinet by pressing
down on the two “OPEN ” marks and slide it to open.
OPEN
OPEN
2.) Insert 8 UM-2 “C” size batteries into the battery compartment according to the
polarity diagram engraved inside the compartment. If the batteries are inserted
incorrectly the unit will not work.
3.) Replace the battery compartment door.
Note: In order to operate the unit on battery power the AC cord must be
disconnected from the AC socket on the back cabinet.
6
PD9814_053105.p65
6
31/5/2005, 10:31
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
7
PD9814_053105.p65
7
31/5/2005, 10:31
LOCATION OF CONTROLS AND INDICATORS
Top Panel
7
6
5
8
4
9
3
10
2
11
1
Front Panel
21 23
16 18
15
17
19 20
22
14
14
13
12
24
8
PD9814_053105.p65
8
31/5/2005, 10:31
1.) BASS BOOST Button.
2.) CD Door.
3.) VOLUME Control.
4.) FUNCTION (CD / TAPE-OFF / RADIO) Selector Switch.
Phones (Stereo Headphone) Jack.
5.)
6.) AC Cord Socket (Back Cabinet).
7.) FM Telescopic Antenna.
8.) Carrying Handle.
9.) BAND (FM ST / FM / AM) Selector Switch.
10.) TUNING Control.
11.) CD Door OPEN CLOSE Tab.
12.) Cassette Control Keys.
(
Record /
Play /
Rewind /
F. Fwd /
Stop-Eject
ct /
13.) Cassette Door.
14.) Speakers.
15.) CD REPEAT Button.
16.) CD PROG (Program) Button.
17.) CD Fwd. Skip Search
Button.
18.) CD Rev. Skip Search
Button.
19.) Multifunction LCD Display.
20.) FM ST Indicator.
21.) RAND (Random) Button.
22.) CD Play/Pause
23.) CD Stop
Button.
Button.
24.) Battery Compartment (Bottom Cabinet).
9
PD9814_053105.p65
9
31/5/2005, 10:31
Pause)
OPERATING INSTRUCTIONS
Listening To The Radio
Tuner Information
This system features a normal AM/FM analog tuning system. Unlike a digital tuner
it does not automatically lock in on the exact frequency of a station. However
instead of a dial scale and a moving dial pointer we have included a digital frequency
display to help you tune more accurately.
Do not be concerned if you cannot easily tune the display to the exact frequency of
your favorite stations, especially on the AM band. Slowly rotate the TUNING control
until the display approaches the frequency of the desired station and stop when
get the strongest, noise free reception - even if the display is not indicating the
exact frequency of desired station.
1.) Slide the FUNCTION (CD/TAPE-OFF/RADIO) Selector to RADIO position.
The LCD display light comes ‘On’.
Select the desired band – AM, FM, or FM ST – by sliding the BAND selector.
2.) Rotate the TUNING control until the exact frequency of
the desired station appears on the display, or until you
are receiving the strongest, clearest signal.
If you have set the BAND selector to FM ST and you tune
to a FM Stereo station the FM ST LED Indicator will light.
Note: If you are listening to a weak FM Stereo station
you can usually improve the reception by moving the
FM ST
BAND selector from the FM ST position to the FM
position, however the sound will now be mono.
3.) Adjust the VOLUME control to your listening preference.
4.) If you prefer more bass, press the BASS BOOST button to ‘On’position.
5.) To turn off the radio, slide the CD/TAPE-OFF/RADIO switch to TAPE-OFF
position to shut power ‘Off’. The LCD display light goes ‘Off’.
10
PD9814_053105.p65
10
31/5/2005, 10:31
Antenna Information
AM
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try rotating
the entire unit until you find the position that provides the best reception.
FM
Extend and vary the direction of the FM antenna to find the position that provides
the best reception.
11
PD9814_053105.p65
11
31/5/2005, 10:31
Playing Compact Discs
Note: Although this portable CD player can read CD-R and CD-RW discs, in addition
to normal CDs, the playability of CD-R/RW discs may be affected by the type of
software that was used to create the discs, as well as the quality and condition of
the blank media you are using. 100% playability cannot be guaranteed. This is not
an indication of a problem with the player.
Normal Playback
1.) Move the FUNCTION selector to the CD position. The LCD display light comes
‘On’.
2.) Open the CD door by lifting the OPEN/CLOSE tab on the top panel. If you
have not already removed the ‘dummy’transit card from the CD player, please
remove it now.
3.) Place your CD on the center spindle with the printed label side facing up. Press
downward on the disc near the center hole until the disc is fully seated on the
spindle. Close the CD door.
The player will read the Table of Contents and the display
will show the total number of tracks and playing time on the
disc.
If the disc is damaged or up side down, display shows
“no disc”
12
PD9814_053105.p65
12
31/5/2005, 10:31
4.) Press the
The
button to begin playback on Track 01.
Indicator appears in the display .
• To skip to higher or lower numbered tracks during playback
or
button repeatedly until the desired track
press the
number appears in the display. Playback will begin on the selected track.
• To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the
or
button. The player will search
rapidly forward or backward as long as the buttons are depressed. Normal
speed playback will resume when the buttons are released.
• To Pause momentarily during playback press the
button
again. The sound stops and the time display flashes. The
“ ” indicator appears. However the disc continues to spin.
To cancel Pause and resume normal playback press the
button once more.
Normal playback resumes and the time display stops flashing. The “ ” indicator
disappears.
5.) Adjust the VOLUME and BASS BOOST controls as desired.
6.) To Stop playback at any time press the (Stop) button. The disc stops and the
display again shows the total number of tracks on the disc. After the last track
has played the disc stops automatically and the display again shows the total
number of tracks on the disc.
7.) Open the CD door, remove your disc, and close the CD door again.
8.) Move the FUNCTION selector to the TAPE-OFF position to shut the power
‘Off’. The LCD display light goes ‘Off’.
To Start Playback From A Specific Track
Insert your disc in the player, close the door, and wait until the display shows the
total tracks and playing time. Press either the
or
track number appears in the display, then press the
on that track.
button until the desired
button to begin playback
13
PD9814_053105.p65
13
31/5/2005, 10:31
Repeat Playback
You can program the player to repeat either a single track or all tracks on the disc
continuously. The Repeat function can only be activated while a disc is playing.
One Track Repeat
1.) Select the track you wish to repeat with the
the
or
buttons and then press
ss
button to begin playback.
2.) Press the REPEAT button once. The REPEAT Indicator
appears.The selected track will be repeated continuously.
To cancel One Track Repeat press the
(Stop) button.
All Tracks Repeat
1.) Press the
button to begin playback.
2.) Press the REPEAT button twice.
The ALL REPEAT Indicator appears.
The entire disc will be repeated continuously.
To cancel All Tracks Repeat press the
(Stop) button.
Random Playback
To listen to the tracks on a disc in random order:
1.) Press the RAND button once.
The RANDOM indicator appears.
2.) The player will select a track at random and playback begins
on that track. After each track has played once the player
stops automatically.
To cancel random playback at any time, press the RAND button until RANDOM
indicator disappears.
14
PD9814_053105.p65
14
31/5/2005, 10:31
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the
(Stop) button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD position, insert your disc in the player,
close the door, and wait until the total track number, playing time appear in the
display.
2.) Press the PROG button once. The PROGRAM indicator
and program memory “00” begin flashing and “P-01”appears
in the display.
3.) Use the
or
buttons to select the first track to be
programmed. (Example: Track 07).
4.) When track number “07” flashes in the display, press the
PROG button once again to enter the track “07” in program
memory number “01”.
Track number “07” disappears and “00” flashes again in the
display, “P-02” appears indicating that you may now select
a track to be entered in program memory number “02”.
5.) Use the
or
buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROG button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
7.) To begin programmed playback press the
button. The
LCD display will show the first programmed track and
playback will begin on that track. The PROGRAM indicator
appears.
After the last programmed track has played the player stops and the programmed
tracks are deleted from the memory automatically.
15
PD9814_053105.p65
15
31/5/2005, 10:31
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 on page 15.
When Programmed Playback begins press the REPEAT button twice to activate
the All Tracks Repeat feature.
The ALL REPEAT Indicator appears in LCD display and all the
tracks in your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the
PROGRAM and ALL REPEAT indicators go ‘Off’.
(Stop) button until both the
16
PD9814_053105.p65
16
31/5/2005, 10:31
Playing Cassette Tapes
1.) Open the cassette door by pressing the
Stop/Eject key..
2.) Place a pre-recorded cassette tape with the exposed tape facing down and the
full reel on the left side.
3.) Move the FUNCTION selector to the TAPE-OFF position.
4.) Press the cassette
Play key to begin playback.
5.) Set the VOLUME and BASS BOOST controls as desired.
6.) To advance the tape rapidly press the
ends press the
F.Fwd key. To stop the tape before it
Stop/Eject key..
7.) To rewind the tape rapidly press the
ends press the
Rewind key. To stop the tape before it
Stop/Eject key..
8.) When the tape ends the Automatic Stop System releases the
Play key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape
and close the door.
If you are playing a tape and then switch to the RADIO or CD function be sure
to press the
Stop/Eject key to disengage the tape mechanism. This prevents
excess wear and tear on the mechanism.
17
PD9814_053105.p65
17
31/5/2005, 10:31
IMPORTANT:
Always press the
Stop/Eject key to shut off the tape motor before opening
the cassette door to remove your tape. The Automatic Stop System does not
function in the
F.Fwd and
the
F.Fwd and
Rewind modes. When the tape ends in the
Rewind modes the motor continues to run. You must press
ss
Stop/Eject key to shut off the motor before opening the door to remove
your tape.
Making A Tape Recording
This model allows you to make tape recordings directly from the CD player, or the
radio.
• Refer to “Playing Compact Discs” if necessary to operate the CD player.
• Refer to “Listening To The Radio” if necessary to tune in the station you
wish to record from radio.
1.) Press the
Stop/Eject
ct key to open the cassette door.
2.) Insert a good quality blank cassette tape into the slots on the cassette door
with the open end facing down and the full reel on the left. Use normal tape
only. Do not use tape identified as “CrO2” (Chrome) or “Metal” tape formulations.
For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute
or 120 minute tapes as these thinner tapes are more likely to jam in the
mechanism.
3.) Close the cassette door.
4.) When you are ready to start recording press the Record key. The Play
key will also engage. The CD you are playing, or radio program you selected
will be recorded directly on to the tape.
5.) Press the Pause key during recording to stop the tape temporarily and avoid
recording unwanted material such as radio commercials.
6.) When you have finished recording press the
remove the tape.
Stop/Eject
ct key to stop and
18
PD9814_053105.p65
18
31/5/2005, 10:31
Automatic Recording Volume Level Control
This unit has an Automatic Level Control (ALC) circuit which controls the recording
volume level and prevents overloaded and distorted recordings. The VOLUME
control has no effect on recording volume level. You may change the VOLUME
control setting during the recording or even reduce the volume level to “Minimum”.
This will not effect the level of the recording.
Stereo Headphone Jack
Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the
Phones jack (located on left top cabinet) for private listening without disturbing
others.
Before putting on the headphones reduce the VOLUME control to a low level, then
put the headphones on and gradually increase the VOLUME control to a comfortable
listening level.
The built in speakers are automatically disconnected when headphones are
connected to the
jack.
19
PD9814_053105.p65
19
31/5/2005, 10:31
CARE AND MAINTENANCE
About Cassette Tapes
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each side of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The record key cannot be depressed if the
erase prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the
record key from locking.
A
TAB FOR SIDE A
BREAK OUT TO PREVENT RECORDING
If later you do wish to record on side A of the cassette, cover the tab opening with
a piece of cellophane tape. This will allow the record key to function again.
A
COVER OPENING WITH TAPE
IN ORDER TO RECORD AGAIN.
20
PD9814_053105.p65
20
31/5/2005, 10:31
Cassette Care
Two common causes of trouble experienced when using cassettes are:
1.) Tape jamming — Leading to uneven speed in playback, and
2.) Tape tangling — Where the tape wraps itself around vital parts of themechanism.
To reduce the likelihood of these problems occurring, the following precautions
should be observed:
• Check that there are no loose layers of tape visible
through the cassette center window (see Fig. 1). Take
up any loose layers, using a pencil or hexagonal
barrelled ballpoint pen, before inserting the cassette
into the machine (see Fig. 2).
• If the cassette feels “tight” while performing operation
shown (see Fig. 2), the tape may be jamming due to
“ridges” formed in the winding of the tape (visible
through the center window). These may be removed,
in most cases, by fast winding of the cassette from one
end to the other and back again.
• Use only well-known brands of tape. Avoid use of C-120 cassettes.
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch
the tape surfaces.
Head Cleaning
The tape heads, pinch roller and capstan require periodic cleaning. This removes
particles of the metal oxide coating that wear off the tape and accumulate on these
parts and impair performance.
Disconnect the AC power cord, press the
door, and press the
Stop/Eject key to open the cassette
Play key. Clean the tape heads, pinch roller and capstan with
a soft cloth or cotton pad dampened in isopropyl alcohol or special tape head cleaner.
21
PD9814_053105.p65
21
31/5/2005, 10:31
Compact Disc Care
• To remove a disc from its storage case, press down on the center of the case
and lift the disc out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth. Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
Care Of The Cabinet
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,
polish sprays, or abrasive cleaners on the cabinet.
Caution
Never allow any water or other liquids to get inside the unit while cleaning.
22
PD9814_053105.p65
22
31/5/2005, 10:31
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom
Radio
Noise or sound
Possible Cause
Solution
Station not tuned properly for
Retune the AM or FM
distorted on AM or FM
broadcasts.
AM or FM.
FM: Telescopic antenna is not
broadcast station.
Extend FM Telescopic
extended.
AM: The bar antenna is not
antenna.
Reposition the unit until
FM ST indicator
positioned correctly.
best reception is obtained.
The BAND selector is switched Switch the BAND selector
does not light.
AM or FM, no sound.
to FM position.
to FM ST position.
FUNCTION switch is not set to Set FUNCTION switch to
RADIO.
Volume at minimum.
Compact Disc Player
CD Player will not play.
CD skips while playing.
RADIO.
Increase Volume.
FUNCTION switch is not set to Set FUNCTION switch to
CD.
CD is not installed or installed
CD.
Insert CD with Iabel side
incorrectly.
Disc is dirty or scratched.
up.
Wipe disc with cloth or use
another disc.
R
SERVICE
TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...
CALL TOLL FREE: 1-800-695-0098
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.,
Consumer Affairs Dept.,
5101 Statesman Drive,
Irving, TX 75063.
23
PD9814_053105.p65
23
31/5/2005, 10:31
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts at
an authorized Depot Repair Facility, or replace the product in our discretion. For
repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:
Emerson Radio Corp.
5101 Statesman Drive,
Irving, TX 75063.
This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
The serial number of your unit is located on a label on the back panel. Please take
a moment now to locate the serial number and write the number in the space
provided below. You may be asked to provide this number when calling for product
service.
Model Number: PD9814
Serial Number:
24
PD9814_053105.p65
24
31/5/2005, 10:31
R
EMERSON
Part No. 16-2997
505-01
PD9814_053105.p65
Printed in China
25
31/5/2005, 10:31