Dale Tiffany TF50181 Instructions / Assembly
Add to my manuals2 Pages
Dale Tiffany TF50181 is a stylish and functional lamp that can be used for a variety of purposes. With its adjustable height and shade, you can customize the lamp to fit your specific needs. The lamp also features a convenient pull chain switch, making it easy to turn on and off.
Here are some of the features and possible use cases of the Dale Tiffany TF50181:
- Adjustable height: The lamp's height can be adjusted from 53" to 65", making it perfect for use as a floor lamp, table lamp, or bedside lamp.
- Adjustable shade: The lamp's shade can be tilted and rotated, allowing you to direct the light where you need it most.
advertisement
ASSEMBLY INSTRUCTIONS
Item No: TF50181
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
1. Carefully unpack and lay out the parts as shown in the illustration.
2. Pull the cord through the base to tighten the column connections.
3. Screw the lamp column into the lamp base.
4. Screw the lower stem into the lamp column.
5. Screw the upper stem into the lower column.
6. Pull the balance of cord from the base to tighten excess.
7. Screw the bridge arm into upper stem.
8. Unscrew the shade ring from the socket, place shade into the lamp holder.
Replace the shade ring to secure the shade.
9. Insert the bulb into bulb socket.
Uses (1) Maximum 60WATT Type “A” Bulb or (1) 13Watt CFL bulb.
(Bulb not included)
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 04/23/13
INSTRUCIONES DE ASAMBLEA:
Modelo: TF50181
PARA RAZONES DE REGRASAR: POR FAVOR
CONSERVE EL IMPAQUETADO ORIGINAL
PARA REDUCIR DAÑOS MINIMO.
1. Cuidadosamente Desembale y sentar las partes, como se muestra en la ilustración.
2. Tire de la cuerda a través de la base de apretar las conexiones de la columna.
3. Atornille la columna de la lámpara en la base de la lámpara.
4. Atornille el vástago inferior en la columna de la lámpara.
5. Atornille el vástago superior en la columna inferior.
6. Tire de la balanza de cable desde la base
hasta el exceso de apriete.
7. Atornille el brazo de puente en parte superior del tallo.
8. Desenrosque el anillo de la toma de la toma, lugar de la pantalla
en el soporte de la lámpara. Reemplace la anillo de la toma para asegurar la pantalla.
9. Inserte la bombilla en el portalámparas.
Usos (1) Máximo Tipo 60Watt "A" bombilla o (1) 13watt CFL bombilla.
(Bombilla no incluida)
Limpieza de lampara
Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos.
*Guardar estas instructiones para una referencia futura.
Hecho en China Revision – 04/23/13
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project