AKR 302 PRODUCT DESCRIPTION SHEET

AKR 302
NO SE
PRODUCT DESCRIPTION SHEET
DK
FI
1.
2.
3-4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Removable panstand grids
Large burner
Medium burner
Small burner
Medium burner
control knob
Medium burner
control knob
Large burner
control knob
Small burner control
knob
Timer/Minute minder
Burner selector
Indicator lights
Minute setting
Alphanumeric display
Symbols
Shaded
circle
Large
flame
and star
Small
flame
Innovative cooktop features
The gas cooktop you have bought has some
innovative features, compared with traditional gas
cooktops.
Instantaneous burner ignition: simply turn the
knob to the desired symbol and press,
releasing it again as soon as the burner lights.
Unlike with many traditional cooktops with safety
burners, it is unnecessary to hold the knob down for
several seconds.
5019 319 53881
Tap closed
Maximum opening of gas
and electric ignition
Minimum opening of gas
Programming burners for automatic switch-off:
any one of the four burners can be set. In this way,
once the time set on the display (14) has elapsed,
the burner switches off automatically. In addition,
the programmer can be used as an ordinary minute
minder, without connecting it to any burner
function in particular.
“Touch control”: this modern technology not only
guarantees excellent performance and ease of use,
but an extremely easy-to-clean cooktop surface.
To activate the programmer or minute minder, just
press lightly on the symbols
,
and
(11 and 13).
Operation of burners with safety
device and electric ignition
Note:
—
To light one of the burners:
•
Press the relative knob and turn it anti-clockwise
to the large flame and star setting
.
•
Keep the knob pressed until the burner
ignites.
•
Release the knob once the burner has ignited.
If the burner does not ignite, repeat the operation.
—
Should particular local conditions of the
delivered gas make the ignition of the burner
difficult, it is advisable to repeat the
operation with the knob turned to the small
flame setting .
The burner safety system serves to prevent
the emission of gas if the flame should be
extinguished accidentally (draughts,
interruptions in gas supply, dousing with
liquids, etc.).
Operation of programmer:
•
•
The programmer function can only be used for
one burner at a time.
To select the burner press the relative
symbol
(11).
A red indicator light (12) indicates the selected
burner. When the indicator light of the desired
burner comes on, select the cooking time (from 1 to
99 minutes) by pressing the symbols
or
(13). The display (14) shows the set time and the
numbers flash for approximately three seconds,
after which the countdown begins. When the set
time has elapsed, the burner switches off
automatically and a buzzer sounds. At the same
time, the red indicator light flashes for approx. 10
seconds, after which the programmer switches off.
•
At the end of cooking, turn the knob back to
the symbol
(tap closed).
N.B.: To zero the display, press
and
at the
same time. At this point, a new time setting can be
made, or else the programmer can be switched off
by pressing
and
at the same time. In both
cases, the burner remains lit.
—
The programmer can be activated either with
the burner on or off. For example, this
function can be useful when cooking must
continue for a set number of minutes once
the water is boiling.
—
In any event, when lighting burners always
follow the instructions given in the previous
paragraph (operation of gas burners).
Operation of minute minder:
The minute minder function can be used both for
cooking needs and for needs not directly linked to
the cooktop. Its operates independently of the
burners.
Ensure no burner is selected. If a burner is selected,
press the symbol
(11) repeatedly until all
indicator lights are off.
Select the desired time (from 1 to 99 minutes) by
pressing symbols
and
(13) at the same
time. The display (14) shows the set time and the
numbers flash for approximately three seconds,
after which the countdown begins. When the set
time has elapsed, a buzzer sounds.
N.B.: To zero the display, press
and
at the
same time. At this point, a new time setting can be
made, or else the minute minder can be switched
off by pressing
and
at the same time.
Error messages:
In the event of a fault, malfunction or improper use
of the cooktop, the display (14) will show pre-set
codes which indicate the type of error detected.
F 1 : appears whenever the cooktops overheats
excessively.
In this case, all burners are automatically switched
off. At the same time, a buzzer sounds and the four
red indicator lights (12) flash. When the
temperature returns to within normal levels, the
indicator lights go off and the cooktop can once
again be used.
F 2 F 3 : in the event one of these codes
appears, proceed as follows:
Remove any objects touching the
programmer/minute minder area.
Clean and dry the cooktop surface.
If this error message appears again,
disconnect the cooktop from the electrical
power supply for a few seconds.
If the error message persists after this course
of action, contact After-sales Service.
Important:
•
•
•
-
In the event of a power failure, the
programmer/minute minder switches off and
any settings are lost. At this point the
burners must be switched off manually.
Do not use the cooktop surface as a work
surface.
Do not use:
Cast iron griddles or terracotta pots and pans.
Heat diffusers such as metallic mesh or any
other types.
Two burners simultaneously for one receptacle
(e.g for a fish kettle).
•
•
The panstand grids may scratch the cooktop
surface if used incorrectly. Lift them up to
remove them, without dragging them over the
glass, and reposition them with the same care.
If an oven is to be installed under the
cooktop, this must be of our manufacture and
equipped with a cooling system (fan).
DIMENSIONS OF COOKTOP AND WORKTOP (mm)
Note:
If the distance “A” between the wall cabinets is between 600 mm and 680 mm, the
height “B” must be a minimum of 520 mm.
If the distance “A” between the wall cabinets is greater than 680 mm the height
“B” must be a minimum of 400 mm.
Before installing a hood above the cooktop please refer to the hood instructions,
which specify the correct distance.
INJECTORS TABLE
CATEGORY I3B/P
Type of
burner
LIQUID PETROLEUM
GAS
(Cylinder)
G30
large
medium
small
85
65
50
3.00
1.65
1.00
218 g/h
120 g/h
73 g/h
LIQUID PETROLEUM
GAS
(Cylinder)
G31
large
medium
small
85
65
50
2.62
1.43
0.87
187 g/h
102 g/h
62 g/h
Type of gas used
Appliance
model
Injector
marking
Rated
thermal
flow rate
Pcs-kW
Type of gas used
Rated
consumption
Total rated heat
capacity
kW
Reduced
heat
capacity
Pcs-kW
Gas pressure mbar
min.
rat.
max.
0.60
0.35
0.30
25
30
35
0.60
0.35
0.30
25
30
35
Total rated
consumption
Air required
for burning
m3/h
G30 28-30 mbar
4 gas
7.30
531 g/h
14.6
G31 37 mbar
4 gas
6.35
453 g/h
12.7
ELECTRIC SUPPLY: 230 V - 50 Hz