ASSEMBLY INSTRUCTION

SKU#250-720

NOTE:

Please consult a qualified electrician if you are not certain of the installation.

CAUTION:

Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

1. Connect wires white to white and black to black. Cover connections using wire connectors provided.

Tie ground wires from outlet box and from fixture together.

2. Place post cap on the post, and fasten it by tightening wood screws.

3. Install the bulbs (included).

4. Screw nipple into bushing of the fixture

5. Place decorative pan, top cap, decorative cap, and top cover over nipple onto the fixture and fasten them with finial.