the great outdoors by Minka Lavery 8761-166 Installation Guide

INSTALLATION INSTRUCTIONS
For Model 8761 /8762 /8763
READ AND SAVE THESE INSTRUCTIONS
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old
fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3. Thread the 2 mounting screws (E) into the mounting plate (C)
spaced the same distance apart as the holes in the fixture back
plate. (You can adjust the length of the screws if necessary.)
4. Attach the mounting plate (C) to the outlet box (A) (not
supplied) with mounting screws (B). (Size: #8-32*0.78"L).
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig.2.Making sure that
all wire connectors are secured. If your outlet box has a ground
wire (green or bare copper), connect the fixture’s ground wire
to it. Otherwise, connect the fixture’s ground wire directly to the
circular strap using the green screw provided.
COMPLETING THE INSTALLATION (Fig.1)
6. Align the fixture back plate to mounting plate (C) and secure
with cap nuts (F).
7. To prevent moisture from entering the outlet box and causing a
short, use clear caulking (i.e. Indoor/Outdoor Silicone Sealant)
to outline the outside of fixture back plate where it meets the
wall leaving a space at bottom to allow moisture a means to
escape. (Fig. 3)
8. Install the bulb (A-19medium base, not supplied) in
accordance with the fixture’s specification. DO NOT EXCEED
THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER
LA PUISSANCE NOMINALE MAXIMALE!)
Your installation is now complete.
junction box and test the fixture.
Fig. 2
FIXTURE
WIRES
Black or
Smooth
Return power to the
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)
Fig. 3
Caulking
Backplate