Minka Lavery 5352-593 Instructions / Assembly

INSTALLATION INSTRUCTIONS FOR 5352-593 5353-593 5354-593
For Wall Mount Fixture
WARNING! SHUT
POWER OFF
AT
FUSE
OR CIRCUIT BREAKER .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE
WIRING (Fig.2)
INSTALLATION(Fig.1)
1. Shut off the power at the circuit breaker and remove the old 1. Connect the electrical wires as follows. Connect the
black wire from the fixture to the black house (hot)
fixture from ceiling, including the old crossbar.
wire. Connect the white wire from the fixture to the
2. Carefully unpack the new fixture and lay all the parts on a clear
white (neutral) house wire. Make sure all wire nuts
surface.
are secured. You may wrap the connections with
3. Thread the two mounting screws into the pre-drilled holes in the
electrical tape. If your outlet box has a ground wire
mounting plate, spaced about the same distance apart as the holes
(green or bare copper) connect fixture’s ground wire
in the fixture back plate. Attach the mounting plate to the
to it. Otherwise attach the bare copper fixture wire to
junction box using two junction box screws (Size: #8-32*1/2"L).
the green ground screw (Size: #8-32*3/8"L) on the
The side of the mounting plate marked “GND” must face out.
mounting plate.
4. Guide fixture wires through hole in center of mounting plate.
2.Tuck the wire connections neatly into the wall junction
5. Follow wiring instructions carefully (see fig.2)
box.
6. Mount fixture by aligning mounting holes in fixture back plate
with mounting screws and threading ball nuts (B) onto mounting
screws.
7. Attach the glass shade (C) onto the socket of the fixture body
(A), and then lock it securely with the socket ring (D) .
8. Install the light bulbs (not included) in accordance with the
fixture’s specifications: DO NOT EXCEED THE MAXIMUM
WATTAGE RATING! (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!)
Your installation is now complete. Return power to the junction
box and test the fixture.
Fig.1
Fig.2
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
HOUSE (Ground) HOUSE
WIRES
WIRES
Green or
White
(Neutral)
Bare Copper(Ground)
CM
C
US
lntertek