Minka Lavery 1494-357 Installation Guide

INSTALLATION INSTRUCTIONS
Item#1493, 1494 (New. 04/10/2009)
READ AND SAVE THESE INSTRUCTIONS
WARNING!
S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the fixture from the carton and
check that all parts are included as shown in
the illustration.
2. Shut off power at the circuit breaker and
remove old fixture including the mounting
hardware.
3. Place the Glass Panel (I) to the side of the
Metal Frame (O), then align backing plate (K)
with Hole (M), secure by using Screws (J).
4. Determine length desired and thread Bars (G)
to Canopy (E) and Metal Frame (O).
5. Attach the Circular Strap (B) to the Junction box
(A) using Screws (C). The side of the Circular
Strap with “GND” marked on it and two convex
points must face out.
6. Thread Studs (D) about 1/4” into the pre-drilled
holes in the Circular Strap (B) spaced the same
distance apart as the holes in the canopy (E).
Fig. 1
D
E
F
G
O
Q
CONNECTING THE WIRES (Fig. 2)
7. At this point, connect the electrical wire as
shown in (Fig.2), making sure that all wire
connectors are secured. If your outlet has a
ground wire (green or bare copper), connect
the fixture’s Ground Wire to it. Otherwise,
connect the fixture Ground Wire directly to the
Circular Strap using the Green Screw provided.
FINISHING THE INSTALLATION (Fig. 1)
8. Tuck the wire connections neatly into the ceiling
Junction Box (A) and then raise the Canopy (E)
all the way to the ceiling. Thread Studs (D) into
canopy, and secure with Knurled Knobs (F).
9. Thread the Nipple (P) into the bottom of Socket
(Q).
10. Install light bulb (not included) in accordance
with the fixture’s specifications. (DO NOT
EXCEED
THE
MAXIMUM
WATTAGE
RATING!)
11. Place Glass Panel (L) and Washer (H) over
Nipple (P) then secure with Finial (N).
A
B
C
I
M
J
K
P
L
H
N
Fig. 2
FIXTURE
WIRES
Black or
Smooth
Your installation is now complete. Return power to
the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not
be identical to the fixture purchased.
LA-1442E
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green
(Ground)