Minka Lavery 9146-291 Installation Guide

INSTALLATION INSTRUCTIONS
Model #9146
READ AND SAVE THESE INSTRUCTIONS
WARNING!
S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARING FOR INSTALLATION (Fig.1)
Fig. 1
1. Shut off power at the circuit breaker (avertissement!
couper le courant au niveau des fusibles ou du
disjoncteur) and remove the old fixture including the
mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
3. Pull the black, white and ground wires out of post (F).
B
C
CONNECTING THE WIRES (Fig. 2)
4. While supporting the fixture, connect electrical wires
while supporting the lantern. If your post has a ground
wire (green or bare copper), connect the fixture ground
wire to it. If not, consult your electrician for proper
grounding. After wires are connected, tuck them
carefully inside the post cup (D).
COMPLETING THE INSTALLATION (Fig. 1)
5.
Align the lantern with post (F) and secure with screws
(E) ( Part#8/32”*3/8”L). (Fig.1&2)
6. At this point, unscrew the finial (A) and remove the
rubber washer (B) and top cover (C) to install
3X60W/E12 bulbs (not included) in accordance with the
fixture specification –DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!(NE PAS DEPASSER
LA PUISSANCE NOMINALE MAXIMALE!)
7. Replace the top cover (C) and rubber washer (B) and
secure with the finial (A).
Fig.2
FI XTURE
WI RES
GREEN OR
BARE
COPPER
( GROUND)
FI XTURE
WI RES
WHI TE
FI XTURE
WI RES
BLACK
HOUSE
WI RES
BLACK
( HOT)
HOUSE
WI RES
WHI TE
( NEUTRAL)
HOUSE
WI RES
GREEN OR
BARE COPPER( GROUND)
Your installation is now complete. Return power to and test
the fixture.
“CAUTION-RISK OF FIRE CONSULT A QUALIFIED
ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR”
ATTENTION – RISQUE D’INCENDIE, CONSULTER UN
ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE
LES CONDUCTEURS DE LA DÉRIVATION SONT
ADÉQUATS.
U.S. Patents: D512,176; D515,237
This product is protected by United
States Federal and/or State Law,
including Patent and/or Copyright laws.