Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Camera User Guide
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
ENGLISH
• Make sure you read this guide, including the “Safety
Precautions” section (= 6), before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the
future.
• Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
• To jump to the beginning of a chapter, click the chapter
title at right.
From chapter title pages, you can access topics by
clicking their titles.
©CANON INC. 2014
CDD-E566-030
Appendix
Index
1
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Battery Pack
NB-6LH
Camera
Battery Charger
CB-2LY/CB-2LYE
Printed Matter
Wrist Strap
•A memory card is not included (= 2).
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
*Cards conforming to SD standards. However, not all memory cards have been verified
to work with the camera.
Preliminary Notes and Legal
Information
• Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that result in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
• Images recorded by the camera shall be for personal use. Refrain from
unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
• The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not indicate camera damage or
affect recorded images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
• When the camera is used over an extended period, it may become warm.
This does not indicate damage.
2
Before Use
Part Names and Conventions in This
Guide
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Lens
Power button
Microphone
Wi-Fi antenna area
Speaker
Flash
Zoom lever
<h (Flash up)> switch
(N-Mark)*
Shooting:<i (telephoto)> /
Tripod socket
<j (wide angle)>
DC coupler terminal cover
Playback:<k (magnify)> /
Memory card/battery cover
<g (index)>
Shutter button
*Used with NFC features (= 91).
Lamp
• Shooting modes and on-screen icons and text are indicated in brackets.
• : Important information you should know
• : Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
• Instructions in this guide apply to the camera under default settings.
• For convenience, all supported memory cards are simply referred to as
the “memory card”.
• The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
:Indicates that the function is used when shooting or
viewing still images.
Movies
:Indicates that the function is used when shooting or
viewing movies.
Screen (LCD monitor)
Strap mount
AV OUT (Audio/video output) /
DIGITAL terminal
HDMITM terminal
Mode switch
<1 (Playback)> button
<b (Exposure compensation)> /
< (Wi-Fi)> / Up button
<e (Macro)> / Left button
Indicator
<{ (Mobile device connection)>
button
Movie button
FUNC./SET button
<h (Flash)> / Right button
<l (Display)> / Down button
<n> button
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
• The following camera buttons and controls are represented by icons.
<o> Up button on back
<q> Left button on back
<r> Right button on back
<p> Down button on back
3
Table of Contents
Package Contents..........................2
Compatible Memory Cards.............2
Preliminary Notes and Legal
Information......................................2
Part Names and Conventions
in This Guide...................................3
Table of Contents............................4
Common Camera Operations.........5
Safety Precautions..........................6
Basic Guide....................... 9
Initial Preparations........................10
Trying the Camera Out.................14
Advanced Guide.............. 17
Camera Basics............................17
On/Off...........................................18
Shutter Button...............................19
Shooting Display Options.............19
Using the FUNC. Menu.................20
Using Menus.................................21
On-Screen Keyboard....................22
Indicator Display...........................22
Clock.............................................23
Auto Mode / Hybrid Auto
Mode............................................24
Shooting with Camera-Determined
Settings.........................................25
Common, Convenient Features....30
Image Customization Features.....34
Helpful Shooting Features............36
Customizing Camera Operation...37
Other Shooting Modes...............40
Specific Scenes............................41
Applying Special Effects...............42
Special Modes for Other
Purposes.......................................47
P Mode.........................................51
Shooting in Program AE
([P] Mode).....................................52
Image Brightness (Exposure).......52
Image Colors................................55
Shooting Range and Focusing.....57
Flash.............................................61
Other Settings...............................63
Playback Mode...........................65
Viewing.........................................66
Browsing and Filtering Images.....69
Image Viewing Options.................71
Protecting Images.........................73
Erasing Images.............................76
Rotating Images............................78
Tagging Images as Favorites........79
Editing Still Images.......................80
Editing Movies..............................83
Wi-Fi Functions...........................85
What You Can Do with Wi-Fi........86
Registering Web Services.............88
Installing CameraWindow on a
Smartphone..................................91
Preparing to Register
a Computer...................................92
Accessing the Wi-Fi Menu............94
Connecting via an Access Point...95
Connecting without an Access
Point............................................100
Connecting to Another
Camera.......................................102
Sending Images..........................103
Saving Images to a Computer....105
Using the <{> Button..................106
Sending Images Automatically
(Image Sync)..............................108
Geotagging Images on the
Camera.......................................109
Shooting Remotely..................... 110
Editing or Erasing Wi-Fi
Settings....................................... 111
Setting Menu.............................113
Adjusting Basic Camera
Functions.................................... 114
Accessories..............................120
System Map................................121
Optional Accessories..................122
Using Optional Accessories........123
Using the Software.....................127
Printing Images...........................129
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Appendix...................................137
Playback Mode
Troubleshooting..........................138
On-Screen Messages.................141
On-Screen Information...............144
Functions and Menu Tables........146
Handling Precautions..................153
Specifications..............................154
Index...........................................158
Wi-Fi (Wireless LAN)
Precautions.................................160
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Before Use
Common Camera Operations
zz
Focus on faces.......................................................................... 25, 41, 58
zz
Without using the flash (Flash Off)........................................................ 26
zz
Include yourself in the shot (Self-Timer)......................................... 31, 48
zz
Add a date stamp.................................................................................. 32
zz
Movie clips and photos together (Movie Digest)................................... 27
4 Shoot
zz
Use camera-determined settings
(Auto Mode, Hybrid Auto Mode)...................................................... 25, 27
zz
See several effects applied to each shot, using camera-determined
settings (Creative Shot Mode).............................................................. 43
Shooting people well
I
zz
View images (Playback Mode).............................................................. 66
zz
Automatic playback (Slideshow)........................................................... 71
zz
On a TV............................................................................................... 123
zz
On a computer.................................................................................... 127
zz
Browse through images quickly............................................................ 69
zz
Erase images........................................................................................ 76
P
Against Snow
(= 41)
Portraits
(= 41)
Matching specific scenes
Night Scenes
(= 41)
1View
Low Light
(= 41)
t
E Shoot/View Movies
zz
Shoot movies........................................................................................ 25
zz
View movies (Playback Mode).............................................................. 66
Fireworks
(= 42)
cPrint
Applying special effects
Miniature Effect
(= 45)
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Print pictures....................................................................................... 129
Vivid Colors
(= 42)
Basic Guide
Poster Effect
(= 42)
Toy Camera Effect
(= 46)
Fish-Eye Effect
(= 44)
Monochrome
(= 46)
Save
zz
Save images to a computer via a cable.............................................. 128
Use Wi-Fi Functions
zz
Send images to a smartphone.............................................................. 87
zz
Share images online............................................................................. 88
zz
Send images to a computer................................................................ 108
5
Safety Precautions
• Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• The safety precautions noted here are intended to prevent you and other
persons from being injured or incurring property damage.
• Be sure to also check the guides included with any separately sold
accessories you use.
Warning Denotes the possibility of serious injury or death.
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight.
In particular, remain at least 1 meter (3.3 feet) away from infants when
using the flash.
• Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
• Use only recommended power sources.
• Do not disassemble, alter, or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• Do not touch the interior of the product if it is broken, such as when
dropped.
• Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
• Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
• Do not look through the viewfinder (if your model has one) at intense
light sources, such as the sun on a clear day or an intense artificial
light source.
This could damage your eyesight.
• Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the
product and distance yourself from it.
• Use only the recommended battery pack/batteries.
• Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, fire, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately flush with water.
• If the product uses a battery charger, note the following precautions.
-Remove the plug periodically and, using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
-Do not insert or remove the plug with wet hands.
-Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
-Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
-Do not cut, damage, alter, or place heavy items on the power cord,
if your product uses one.
This could result in electrical shock or fire.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
6
• Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
Caution
Denotes the possibility of injury.
• When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or
clothing.
This could result in burns or damage to the flash.
• Avoid using, placing, or storing the product in the following places:
-Places subject to direct sunlight
-Places subject to temperatures above 40 °C (104 °F)
-Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns, or other
injuries.
• The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
• When using optional lenses, lens filters, or filter adapters (if
applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
• On products that raise and lower the flash automatically, make sure
to avoid pinching your fingers with the lowering flash.
This could result in injury.
Caution
Denotes the possibility of property damage.
• Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
• When using the camera on a sandy beach or at a windy location, be
careful not to allow dust or sand to enter the camera.
• On products that raise and lower the flash automatically, do not push
the flash down or pry it open.
This may cause the product to malfunction.
• Wipe off any dust, grime, or other foreign matter on the flash with a
cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the
product to malfunction.
• Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
• Before you discard the battery pack/batteries, cover the terminals
with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Unplug any battery charger used with the product when not in use.
Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
• Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion,
resulting in product damage or fire.
7
• If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
• Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen. Also close the screen (so that
it faces the body), if your product’s screen closes.
• Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8
Before Use
Basic Guide
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Basic information and instructions, from initial preparations to shooting and playback
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Initial Preparations............................................ 10
Attaching the Strap................................................. 10
Holding the Camera............................................... 10
Charging the Battery Pack..................................... 10
Inserting the Battery Pack and Memory Card........ 11
Setting the Date and Time...................................... 12
Display Language.................................................. 13
Trying the Camera Out...................................... 14
Shooting (Smart Auto)............................................ 14
Viewing................................................................... 15
Setting Menu
Accessories
Appendix
Index
9
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1 Insert the battery pack.
zz
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
zz
After aligning the  marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2 Charge the battery pack.
zz
CB-2LY: Flip out the plug ( ) and plug
Holding the Camera
zz
Place the strap around your wrist.
zz
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
CB-2LY
CB-2LYE
the charger into a power outlet ( ).
zz
CB-2LYE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
zz
The charging lamp turns orange, and
charging begins.
zz
When charging is finished, the lamp turns
green.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Remove the battery pack.
zz
After unplugging the battery charger,
remove the battery pack by pushing it in
( ) and up ( ).
10
2 Insert the battery pack.
• To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
Time, Playback Time” (= 155).
• Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery pack.
zz
While pressing the battery lock in the
Terminals
Battery
Lock
3 Check the card’s write-protect
tab and insert the memory card.
zz
Recording is not possible on memory
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(= 117).
1 Open the cover.
zz
Slide the cover ( ) and open it ( ).
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
zz
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
Label
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
zz
Insert the memory card facing as shown
until it clicks into the locked position.
zz
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4 Close the cover.
zz
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” (= 155).
11
Removing the Battery Pack and Memory Card
Remove the battery pack.
2 Set the date and time.
zz
Press the <q><r> buttons to choose an
option.
zz
Open the cover and press the battery
zz
Press the <o><p> buttons to specify
zz
The battery pack will pop up.
zz
When finished, press the <m> button.
lock in the direction of the arrow.
the date and time.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Remove the memory card.
zz
Push the memory card in until it clicks,
and then slowly release it.
zz
The memory card will pop up.
3 Specify your home time zone.
zz
Press the <q><r> buttons to choose
your home time zone.
4 Finish the setup process.
zz
Press the <m> button when finished.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (= 32).
1 Turn the camera on.
zz
Press the power button.
zz
The [Date/Time] screen is displayed.
After a confirmation message, the setting
screen is no longer displayed.
zz
To turn off the camera, press the power
button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose [
choose [ ] by pressing the <o><p> buttons.
] in step 2 and then
12
Changing the Date and Time
Adjust the date and time as follows.
1 Access the camera menu.
zz
Press the <n> button.
2 Choose [Date/Time].
zz
Move the zoom lever to choose the [3]
tab.
zz
Press the <o><p> buttons to choose
[Date/Time], and then press the <m>
button.
3 Change the date and time.
zz
Follow step 2 in “Setting the Date and
Time” (= 12) to adjust the settings.
zz
Press the <n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
separately, = 122), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (= 12).
Before Use
Display Language
Change the display language as needed.
1 Enter Playback mode.
zz
Press the <1> button.
2 Access the setting screen.
zz
Press and hold the <m> button, and
then immediately press the <n>
button.
3 Set the display language.
zz
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
zz
Once the display language has been set,
the setting screen is no longer displayed.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The current time is displayed if you wait too long in step 2 after pressing the
<m> button before you press the <n> button. In this case, press the
<m> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
] on the [3] tab.
and choosing [Language
13
Trying the Camera Out
Still Images
Movies
zz
To zoom in and enlarge the subject, move
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zz
Press the power button.
zz
The startup screen is displayed.
2 Enter [
3 Compose the shot.
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
4Shoot.
Shooting Still Images
Focus.
zz
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
zz
Set the mode switch to [4].
zz
Press the <m> button, press the
zz
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
zz
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
zz
Frames displayed around any detected
subjects indicate that they are in focus.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
] mode.
], and
<o><p> buttons to choose [
then press the <m> button again.
zz
Press the <o><p> buttons to choose
], and then press the <m> button.
[
Before Use
Accessories
Appendix
zz
If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Index
14
Shoot.
zz
Press the shutter button all the way
down.
zz
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zz
Keep the camera still until the shutter
sound ends.
zz
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
Before Use
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zz
Press the <1> button.
zz
Your last shot is displayed.
2 Browse through your images.
zz
To view the previous image, press the
<q> button. To view the next image,
press the <r> button.
zz
Press the movie button. The camera
Elapsed Time
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
zz
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zz
Frames displayed around any detected
faces indicate that they are in focus.
zz
Once recording begins, take your finger
off the movie button.
Finish shooting.
zz
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
To access Scroll Display mode, press and
hold the <q><r> buttons for at least one
second. In this mode, press the <q><r>
buttons to browse through images.
zz
To return to single-image display, press
the <m> button.
15
Before Use
zz
Movies are identified by a [
play movies, go to step 3.
] icon. To
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
1 Choose an image to erase.
zz
Press the <q><r> buttons to choose an
3 Play movies.
zz
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
zz
Playback now begins, and after the movie
] is displayed.
is finished, [
zz
To adjust the volume, press the <o><p>
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
image.
2 Erase the image.
zz
Press the <m> button, press the
<o><p> buttons to choose [a], and
then press the <m> button again.
zz
After [Erase?] is displayed, press the
<q><r> buttons to choose [Erase], and
then press the <m> button.
zz
The current image is now erased.
zz
To cancel erasure, press the <q><r>
buttons to choose [Cancel], and then
press the <m> button.
• You can also erase all images at once (= 76).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
16
Before Use
Advanced Guide
Basic Guide
Advanced Guide
Camera Basics
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other basic operations and more ways to enjoy your camera, including shooting and playback options
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
On/Off................................................................. 18
Power-Saving Features (Auto Power Down)......... 18
Shutter Button................................................... 19
Shooting Display Options................................ 19
Using the FUNC. Menu..................................... 20
Using Menus...................................................... 21
On-Screen Keyboard........................................ 22
Indicator Display............................................... 22
Clock.................................................................. 23
Setting Menu
Accessories
Appendix
Index
17
On/Off
Power-Saving Features (Auto Power Down)
Shooting Mode
zz
Press the power button to turn the
camera on and prepare for shooting.
zz
To turn the camera off, press the power
button again.
Playback Mode
zz
Press the <1> button to turn the camera
on and view your shots.
zz
To turn the camera off, press the <1>
button again.
• To switch to Playback mode from Shooting mode, press the <1> button.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway (= 19).
• The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by
pressing the <1> button.
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
but the lens is still out, press the shutter button halfway (= 19).
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
• You can deactivate Auto Power Down and adjust the timing of Display Off, if
you prefer (= 116).
• Power saving is not active while the camera is connected to other devices via
Wi-Fi (= 85), or when connected to a computer (= 128).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
18
Shutter Button
Shooting Display Options
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
Press the <p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information” (= 144).
zz
Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2 Press all the way down. (From
the halfway position, press fully
to shoot.)
zz
The camera shoots, as a shutter sound
is played.
zz
Keep the camera still until the shutter
sound ends.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
1 Press halfway. (Press lightly to
focus.)
Before Use
Other Shooting
Modes
Information is displayed
No information is
displayed
• Screen brightness is automatically increased by the night view function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
• For playback display options, see “Switching Display Modes” (= 67).
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
19
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(= 147 – 148) or playback mode (= 153).
1 Access the FUNC. menu.
zz
Press the <m> button.
4 Finish the setup process.
zz
Press the <m> button.
zz
The screen before you pressed the
<m> button in step 1 is displayed again,
showing the option you configured.
• To undo any accidental setting changes, you can restore the camera’s default
settings (= 119).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
2 Choose a menu item.
zz
Press the <o><p> buttons to choose a
Options
menu item, and then press the <m> or
<r> button.
zz
Depending on the menu item, functions
can be specified simply by pressing the
<m> or <r> button, or another screen is
displayed for configuring the function.
Menu Items
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Choose an option.
zz
Press the <o><p> buttons to choose
an option.
zz
Options labeled with a [
] icon can
be configured by pressing the <n>
button.
zz
To return to the menu items, press the
<q> button.
20
Using Menus
3 Choose a menu item.
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [4],
playback [1], and so on. Note that available menu items vary depending
on the selected shooting or playback mode (= 149 – 152).
1 Access the menu.
zz
Press the <n> button.
2 Choose a tab.
zz
Move the zoom lever to choose a tab.
zz
After you have pressed the <o><p>
buttons to choose a tab initially, you can
switch between tabs by pressing the
<q><r> buttons.
zz
Press the <o><p> buttons to choose a
menu item.
zz
For menu items with options not shown,
first press the <m> or <r> button to
switch screens, and then press the
<o><p> buttons to select the menu
item.
zz
To return to the previous screen, press
the <n> button.
4 Choose an option.
zz
Press the <q><r> buttons to choose an
option.
5 Finish the setup process.
zz
Press the <n> button to return to the
screen displayed before you pressed the
<n> button in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• To undo any accidental setting changes, you can restore the camera’s default
settings (= 119).
21
On-Screen Keyboard
Indicator Display
Use the on-screen keyboard to enter information for Wi-Fi connections
(= 94). Note that the length and type of information you can enter varies
depending on the function you are using.
Number of Available Characters
The indicator on the back of the camera (= 3) lights up or blinks
depending on the camera status.
Color
Entering Characters
zz
Press the <o><p><q><r> buttons to
choose a character, and then press the
<m> button to enter it.
zz
The amount of information you can enter
varies depending on the function you are
using.
Moving the Cursor
zz
Choose [
button.
Before Use
] or [
] and press the <m>
Deleting Characters
zz
Choose [ ] and press the <m> button.
The previous character will be deleted.
Confirming Input and Returning to
the Previous Screen
Indicator
Status
On
Green
Blinking
Camera Status
Connected to a computer (= 128), or display off
(= 18, 115, 116)
Starting up, recording/reading/transmitting images,
shooting long exposures (= 49), or connecting/
transmitting via Wi-Fi
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <n> button.
22
Before Use
Clock
Basic Guide
You can check the current time.
Advanced Guide
zz
Press and hold the <m> button.
zz
The current time appears.
zz
If you hold the camera vertically while
using the clock function, it will switch
to vertical display. Press the <q><r>
buttons to change the display color.
zz
Press the <m> button again to cancel
the clock display.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
• When the camera is off, press and hold the <m> button, then press the power
button to display the clock.
Accessories
Appendix
Index
23
Before Use
Basic Guide
Auto Mode / Hybrid Auto Mode
Convenient mode for easy shots with greater control over shooting
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Shooting with Camera-Determined
Settings............................................................. 25
Shooting (Smart Auto)............................................ 25
Shooting in Hybrid Auto Mode................................ 27
Scene Icons........................................................... 29
Image Stabilization Icons....................................... 29
On-Screen Frames................................................. 30
Common, Convenient Features....................... 30
Zooming In Closer on Subjects (Digital Zoom)...... 30
Using the Self-Timer.............................................. 31
Adding a Date Stamp............................................. 32
Continuous Shooting.............................................. 33
Image Customization Features........................ 34
Changing the Aspect Ratio..................................... 34
Changing Image Resolution (Size)........................ 34
Red-Eye Correction................................................ 35
Changing Movie Image Quality.............................. 35
Helpful Shooting Features............................... 36
Displaying Grid Lines............................................. 36
Magnifying the Area in Focus................................. 36
Checking for Closed Eyes...................................... 37
Customizing Camera Operation...................... 37
Deactivating the AF-Assist Beam........................... 37
Deactivating the Red-Eye Reduction Lamp........... 38
Changing the Image Display Style after Shots....... 38
Setting Menu
Accessories
Appendix
Index
24
Shooting with Camera-Determined
Settings
3 Compose the shot.
zz
To zoom in and enlarge the subject, move
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Zoom Bar
Still Images
Movies
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle). (A zoom bar
showing the zoom position is displayed.)
Shooting (Smart Auto)
2 Enter [
] mode.
zz
Set the mode switch to [4].
zz
Press the <m> button, press the
], and
<o><p> buttons to choose [
then press the <m> button again.
zz
Press the <o><p> buttons to choose
], and then press the <m> button.
[
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
1 Turn the camera on.
zz
Press the power button.
zz
The startup screen is displayed.
Before Use
P Mode
4Shoot.
Shooting Still Images
Focus.
zz
Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
zz
Several AF frames are displayed when
multiple areas are in focus.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
zz
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen (= 29).
zz
Frames displayed around any detected
subjects indicate that they are in focus.
25
Before Use
zz
If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
zz
Press the shutter button all the way
down.
zz
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zz
Keep the camera still until the shutter
sound ends.
zz
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
zz
Press the movie button. The camera
Elapsed Time
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
zz
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zz
Frames displayed around any detected
faces indicate that they are in focus.
zz
Once recording begins, take your finger
off the movie button.
esize the subject and
R
recompose the shot as needed.
zz
To resize the subject, repeat the
operations in step 3 (= 25).
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
zz
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
zz
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zz
Recording will stop automatically when
the memory card becomes full.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
26
Still Images
Movies
Shooting in Hybrid Auto Mode
You can make a short movie of the day just by shooting still images. The
camera records 2 – 4-second clips of scenes before each shot, which are
later combined in a digest movie.
1 Enter [ ] mode.
zz
Set the mode switch to [ ].
2 Compose the shot.
zz
Follow steps 3 – 4 in “Shooting (Smart
Auto)” (= 25) to compose the shot and
focus.
zz
For more impressive digest movies,
aim the camera at subjects about four
seconds before shooting still images.
3Shoot.
zz
Follow step 4 in “Shooting (Smart Auto)”
(= 25) to shoot a still image.
zz
The camera records both a still image
and movie clip. The clip, which ends with
the still image and a shutter sound, forms
a single chapter in the digest movie.
Before Use
• Battery life is shorter in this mode than in [
] mode, because
digest movies are recorded for each shot.
• A digest movie may not be recorded if you shoot a still image
immediately after turning the camera on, choosing [ ] mode, or
operating the camera in other ways.
• Sounds and vibrations from operating the camera will be recorded
in digest movies.
• Digest movie quality is [ ] and cannot be changed.
• Sounds are not played when you press the shutter button halfway or trigger
the self-timer (= 114).
• Digest movies are saved as separate movie files in the following cases even if
they were recorded on the same day in [ ] mode.
-The digest movie file size reaches approximately 4 GB, or the total recording
time reaches approximately 29 minutes and 59 seconds.
-The digest movie is protected (= 73).
-Daylight saving time (= 12) or time zone (= 115) settings are changed.
-A new folder is created (= 118).
• Recorded shutter sounds cannot be modified or erased.
• If you prefer to record digest movies without still images, adjust the setting in
advance. Choose MENU (= 21) ► [4] tab ► [Digest Type] ► [No Stills].
• Individual chapters can be edited (= 84).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Digest Movie Playback
Display a still image shot in [ ] mode to play a digest movie, or specify the
date of the digest movie to play (= 68).
27
Before Use
Still Images/Movies
• If the camera is turned on while the <p> button is held down, the
camera will no longer sound. To activate sounds again, press the
<n> button and choose [Mute] on the [3] tab, and then press
the <q><r> buttons to choose [Off].
Still Images
• A blinking [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Flash Range” (= 156).
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see “Shooting Range” (= 156).
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• Although you can shoot again before the shooting screen is
displayed, your previous shot may determine the focus, brightness,
and colors used.
Movies
Basic Guide
• The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
• Before shooting a movie, lower the flash
with your finger. Be careful not to touch
the microphone when shooting a movie.
Leaving the flash raised, or blocking
the microphone may prevent audio
from being recorded or may cause the
recording to sound muffled.
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Once movie recording begins, the image display area changes and
subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting,
adjust the image stabilization setting (= 64).
Microphone
• Audio recording is monaural.
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• You can change how long images are displayed after shots (= 38).
28
Still Images
Movies
Scene Icons
People
Icon
In
At Close Background
Color
Motion*1 Range
Bright
Backlit
Gray
–
With Blue
Sky
Light Blue
Backlit
–
Sunsets
–
–
Orange
Spotlights
Dark
Dark Blue
Tripod
Used
*2
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in [
and [
] modes.
Other Subjects
In
Shadows
Motion*1 on Face*1
Background
Before Use
Movies
Basic Guide
Image Stabilization Icons
In [ ] and [
] modes, shooting scenes determined by the camera
are indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness, and color.
Subject
Still Images
–
*2
–
*1Not displayed for movies.
*2Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
• Try shooting in [G] mode (= 51) if the scene icon does not match
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
]
Advanced Guide
Camera Basics
Image stabilization for still images
(Normal)
Image stabilization for movies,
reducing strong camera shake,
as when shooting while walking
(Dynamic)
Auto Mode / Hybrid
Auto Mode
Image stabilization for still images
when panning* (Panning)
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered)
P Mode
No image stabilization, because
the camera is mounted on a tripod
or held still by other means.
However, during movie recording,
] is displayed, and image
[
stabilization to counteract wind or
other sources of vibration is used.
(Tripod IS)
Wi-Fi Functions
Image stabilization for macro
shots (Hybrid IS).
] is
During movie recording, [
displayed, and image stabilization
for macro movie recording is used.
*Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
• To cancel image stabilization, set [IS Mode] to [Off] (= 63). In this case, an
IS icon is not displayed.
] icon is displayed.
• In [ ] mode, no [
29
Still Images
Movies
On-Screen Frames
In [
] mode, a variety of frames are displayed once the camera detects
subjects you are aiming the camera at.
• A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
• When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
• Try shooting in [G] mode (= 51) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Before Use
Common, Convenient Features
Still Images
Basic Guide
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 72x enlargement.
1 Move the zoom lever toward
<i>.
zz
Hold the lever until zooming stops.
zz
Zooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
Zoom Factor
2 Move the zoom lever toward
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
<i> again.
Accessories
subject.
Appendix
zz
The camera zooms in even closer on the
Index
30
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending
on the zoom range.
-White range: optical zoom range where the image will not appear
grainy.
-Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
-Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (= 34), the maximum zoom factor can be achieved by
following step 1.
• To deactivate digital zoom, choose MENU (= 21) ► [4] tab ► [Digital
Zoom] ► [Off].
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1 Configure the setting.
zz
Press the <m> button, choose [
]
in the menu, and then choose the []]
option (= 20).
zz
Once the setting is complete, []] is
displayed.
Before Use
2Shoot.
zz
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
zz
For Movies: Press the movie button.
zz
Once you start the self-timer, the lamp
will blink and the camera will play a selftimer sound.
zz
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
zz
To restore the original setting, choose
[ ] in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Follow step 1 in “Using the Self-Timer”
(= 31) and choose [[].
zz
Once the setting is complete, [[] is
displayed.
zz
Follow step 2 in “Using the Self-Timer”
(= 31) to shoot.
31
Still Images
Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
zz
Following step 1 in “Using the Self-Timer”
(= 31), choose [$] and press the
<n> button.
2 Configure the setting.
zz
Press the <o><p> buttons to choose
[Delay] or [Shots].
zz
Press the <q><r> buttons to choose a
value, and then press the <m> button.
zz
Once the setting is complete, [$] is
displayed.
zz
Follow step 2 in “Using the Self-Timer”
(= 31) to shoot.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (= 12).
1 Configure the setting.
zz
Press the <n> button, choose [Date
] on the [4] tab, and then
Stamp
choose the desired option (= 21).
zz
Once the setting is complete, [ ] is
displayed.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
2Shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
Before Use
zz
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
zz
To restore the original setting, choose
[Off] in step 1.
Appendix
Index
• Date stamps cannot be edited or removed.
32
Before Use
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
-Print using printer functions (= 129)
-Use camera DPOF print settings (= 133) to print
-Use the software downloaded from the Canon website (= 127) to print
Still Images
Continuous Shooting
In [
] mode, hold the shutter button all the way down to shoot
continuously.
For details on the continuous shooting speed, see “Continuous Shooting
Speed” (= 156).
1 Configure the setting.
zz
Press the <m> button, choose
[ ] in the menu, and then choose [W]
(= 20).
zz
Once the setting is complete, [W] is
displayed.
• During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
• Cannot be used with the self-timer (= 31).
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2Shoot.
zz
Hold the shutter button all the way down
to shoot continuously.
33
Image Customization Features
Still Images
Changing Image Resolution (Size)
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can fit on a memory card, see
“Number of 4:3 Shots per Memory Card” (= 155).
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
The option you configured is now
displayed.
zz
To restore the original setting, repeat this
process but choose [ ].
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
Once the setting is complete, the screen
aspect ratio will be updated.
zz
To restore the original setting, repeat this
process but choose [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or
postcard sizes.
Native aspect ratio of the camera screen, also used for display on standarddefinition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
A2 (16.5 x 23.4 in.)
Appendix
Index
zz
[ ]: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Square aspect ratio.
• Not available in [
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
] mode.
• Not available in [
] mode.
34
Still Images
Red-Eye Correction
Movies
Changing Movie Image Quality
Red-eye that occurs in flash photography can be automatically corrected as
follows.
1 Access the [Flash Settings]
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (= 156).
screen.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
The option you configured is now
displayed.
zz
To restore the original setting, repeat this
process but choose [ ].
zz
Press the <n> button, choose [Flash
Settings] on the [4] tab, and then press
the <m> button (= 21).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
2 Configure the setting.
zz
Choose [Red-Eye Corr.], and then
choose [On] (= 21).
zz
Once the setting is complete, [R] is
displayed.
zz
To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for
example).
• You can also correct existing images (= 82).
• You can also access the screen in step 2 when the flash is up by pressing the
<r> button and immediately pressing the <n> button.
Accessories
Image
Quality
Resolution
Frame Rate
Details
1920 x 1080
30 fps
For shooting in Full HD
1280 x 720
30 fps
For shooting in HD
640 x 480
30 fps
For shooting in standard
definition
Appendix
Index
• In [ ] and [ ] modes, black bars displayed on the top and bottom edges of
the screen indicate image areas not recorded.
35
Helpful Shooting Features
Still Images
Still Images
Magnifying the Area in Focus
Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
zz
Press the <n> button, choose [Grid
Lines] on the [4] tab, and then choose
[On] (= 21).
zz
Once the setting is complete, grid lines
are displayed on the screen.
zz
To restore the original setting, repeat this
process but choose [Off].
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Configure the setting.
zz
Press the <n> button, choose [AFPoint Zoom] on the [4] tab, and then
choose [On] (= 21).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
2 Check the focus.
zz
Press the shutter button halfway. The
• Grid lines are not recorded in your shots.
Before Use
face detected as the main subject is now
magnified.
zz
To restore the original setting, choose
[Off] in step 1.
• The area in focus is not magnified in the following cases when the shutter
button is pressed halfway.
-If a face was not detected, if the person is too close to the camera and their
face is too large for the screen, or if the camera detects subject movement
-Digital zoom (= 30): Not magnified with this feature
-Tracking AF (= 58): Not magnified with this feature
-When using a TV as a display (= 123)
• Not available in [ ] mode.
Accessories
Appendix
Index
36
Still Images
Checking for Closed Eyes
[ ] is displayed when the camera detects that people may have closed
their eyes.
1 Configure the setting.
zz
Press the <n> button, choose [Blink
Detection] on the [4] tab, and then
choose [On] (= 21).
Before Use
Customizing Camera Operation
Customize shooting functions on the MENU [4] tab as follows.
For instructions on menu functions, see “Using Menus” (= 21).
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
zz
Press the <n> button, choose [AF-
assist Beam] on the [4] tab, and then
choose [Off] (= 21).
zz
To restore the original setting, repeat this
process but choose [On].
2Shoot.
zz
[ ] flashes when the camera detects a
person whose eyes are closed.
zz
To restore the original setting, choose
[Off] in step 1.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• When you have specified multiple shots in [$] mode, this function is only
available for the final shot.
• A frame is displayed around people whose eyes are closed when you have
selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (= 38).
• This feature is not available in continuous shooting mode (= 33).
37
Still Images
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots.
1 Access the [Flash Settings]
screen.
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1 Access the [Review image after
zz
Press the <n> button, choose [Flash
shooting] screen.
Settings] on the [4] tab, and then press
the <m> button (= 21).
zz
Press the <n> button, choose
[Review image after shooting] on the
[4] tab, and then press the <m> button
(= 21).
2 Configure the setting.
zz
Choose [Red-Eye Lamp], and then
2 Configure the setting.
choose [Off] (= 21).
zz
To restore the original setting, repeat this
process but choose [On].
zz
Press the <o><p> buttons to choose
[Display Time]. Press the <q><r>
buttons to choose the desired option.
zz
To restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 sec., 4 sec., Displays images for the specified time. Even while the shot is displayed,
8 sec.
you can take another shot by pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button halfway.
Off
No image display after shots.
38
Before Use
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1 Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
(= 38).
2 Configure the setting.
zz
Press the <o><p> buttons to choose
[Display Info]. Press the <q><r> buttons
to choose the desired option.
zz
To restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
Detailed
Displays shooting details (= 145).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
• When [Display Time] (= 38) is set to [Off] or [Quick], [Display Info] is set to
[Off] and cannot be changed.
• By pressing the <p> button while an image is displayed after shooting, you
can switch the display information. Note that the settings of [Display Info]
are not changed. By pressing the <m> button, you can do the following
operations.
-Protect (= 73)
-Favorites (= 79)
-Erase (= 76)
Appendix
Index
39
Before Use
Basic Guide
Other Shooting Modes
Advanced Guide
Camera Basics
Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special
functions
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Specific Scenes................................................. 41
Applying Special Effects.................................. 42
Enjoying a Variety of Images from Each Shot
(Creative Shot)....................................................... 43
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect).................................................... 44
Shots Resembling Miniature Models
(Miniature Effect).................................................... 45
Shooting with a Toy Camera Effect
(Toy Camera Effect)............................................... 46
Shooting in Monochrome....................................... 46
Special Modes for Other Purposes................. 47
Auto Shooting after Face Detection
(Smart Shutter)....................................................... 47
Shooting Long Exposures (Long Shutter).............. 49
High-Speed Continuous Shooting
(High-Speed Burst)................................................ 50
Setting Menu
Accessories
Appendix
Index
40
Before Use
Specific Scenes
Still Images
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1 Enter [4] mode.
Shoot evening scenes without
using a tripod (Handheld
NightScene)
zz
Beautiful shots of evening scenes or
zz
Set the mode switch to [4].
2 Choose a shooting mode.
zz
Press the <m> button, choose [
]
in the menu, and then choose a shooting
mode (= 20).
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
zz
A single image is created by combining
consecutive shots, reducing camera
shake and image noise.
Still Images
Shoot under low light
(Low Light)
shake even in low-light conditions.
Still Images
effect.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Movies
I Shoot portraits (Portrait)
zz
Take shots of people with a softening
Advanced Guide
Setting Menu
zz
Shoot with minimal camera and subject
3Shoot.
Basic Guide
Index
Still Images
Movies
PShoot with snowy backgrounds
(Snow)
zz
Bright, natural-colored shots of people
against snowy backgrounds.
41
Still Images
Movies
tShoot fireworks (Fireworks)
zz
Vivid shots of fireworks.
Before Use
Applying Special Effects
Basic Guide
Add a variety of effects to images when shooting.
Advanced Guide
1 Choose a shooting mode.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) to choose a shooting mode.
• Subjects appear larger in [ ] mode compared to other modes.
• In [ ] mode, shots may look grainy because the ISO speed
(= 54) is increased to suit the shooting conditions.
• Because the camera will shoot continuously in [ ] mode, hold it
steady while shooting.
• In [ ] mode, excessive motion blur or certain shooting conditions
may prevent you from obtaining the desired results.
• In [t] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 63).
• When you use a tripod for evening scenes, shooting in [
] mode instead of
[ ] mode will give better results (= 25).
• [ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.
• In [t] mode, although no frames are displayed when you press the shutter
button halfway, optimal focus is still determined.
2Shoot.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Still Images
Movies
Shoot in vivid colors
(Super Vivid)
P Mode
Playback Mode
zz
Shots in rich, vivid colors.
Wi-Fi Functions
Setting Menu
Still Images
Movies
Posterized shots (Poster Effect)
zz
Shots that resemble an old poster or
illustration.
Accessories
Appendix
Index
• In [ ] and [ ] modes, try taking some test shots first, to make sure
you obtain the desired results.
42
Still Images
Enjoying a Variety of Images from Each Shot
(Creative Shot)
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
1 Enter [ ] mode.
zz
Set the mode switch to [
].
2Shoot.
zz
Press the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
zz
After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
zz
To keep the images displayed until
you press the shutter button halfway,
press the <m> button. For full-screen
display in this state, choose an image by
pressing the <o><p><q><r> buttons,
and then press the <m> button.
zz
To return to the original display, press the
<n> button.
Before Use
Image Display during Playback
The six images from each shot are managed together as a group, and only
the first image in the series is displayed during playback. To indicate that the
image is part of a group, [
] is displayed in the upper left of the screen.
• If you erase a grouped image (= 76), all images in the group are
also erased. Be careful when erasing images.
• Grouped images can be played back individually (= 70) and ungrouped
(= 70).
• Protecting (= 73) a grouped image will protect all images in the group.
• Grouped images can be viewed individually when played back using Image
Search (= 69) or Smart Shuffle (= 72). In this case, images are
temporarily ungrouped.
• The following actions are not available for grouped images: magnifying
(= 71), rotating (= 78), tagging as favorites (= 79), editing (= 80
– 83), printing (= 129), adding to the print list (= 133), or adding to
a photobook (= 135). To do these things, either view grouped images
individually (= 70) or cancel grouping (= 70) first.
• Simultaneous display as shown in step 2 is only available immediately after
you shoot.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Shooting will take some time when the flash fires, but hold the camera steady
until the shutter sound is played three times.
43
Still Images
Choosing Effects
You can choose effects for images captured in [
] mode.
zz
After choosing [
] mode, press the <p>
button.
zz
Press the <q><r> buttons to choose the
effect, and then press the <m> button.
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect)
Shoot with the distorting effect of a fish-eye lens.
zz
Follow steps 1 – 2 in “Specific Scenes”
].
2 Choose an effect level.
Auto
All effects
Retro
Images resemble old photos
Monochrome Images are generated in one color
Special
Bold, distinctive-looking images
Natural
Subdued, natural-looking images
Basic Guide
Advanced Guide
Camera Basics
1 Choose [ ].
(= 41) and choose [
Before Use
zz
Press the <p> button, press the
<q><r> buttons to choose an effect
level, and then press the <m> button.
zz
A preview is shown of how your shot will
look with the effect applied.
3Shoot.
• Try taking some test shots first, to make sure you obtain the desired
results.
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
44
Still Images
Movies
Shots Resembling Miniature Models
(Miniature Effect)
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and objects
in the scene will move quickly during playback. Note that sound is not recorded.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [ ].
zz
A white frame is displayed, indicating the
image area that will not be blurred.
2 Choose the area to keep in
focus.
zz
Press the <p> button.
zz
Move the zoom lever to resize the frame,
and press the <o><p> buttons to move
it.
Before Use
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Speed
Playback Time
Basic Guide
Advanced Guide
Approx. 12 sec.
Camera Basics
Approx. 6 sec.
Auto Mode / Hybrid
Auto Mode
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• Try taking some test shots first, to make sure you obtain the desired
results.
• To switch the orientation of the frame to vertical, press the <q><r> buttons
in step 2. To return the frame to horizontal orientation, press the <o><p>
buttons.
• To move the frame when it is in horizontal orientation, press the <o><p>
buttons, and to move the frame when it is in vertical orientation, press the
<q><r> buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is [ ] at an aspect ratio of [ ] and [ ] at an aspect
ratio of [ ] (= 34). These quality settings cannot be changed.
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 For movies, choose the movie
playback speed.
zz
Press the <n> button, and then press
the <q><r> buttons to choose the speed.
4 Return to the shooting screen
and shoot.
zz
Press the <n> button to return to the
shooting screen, and then shoot.
45
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
Still Images
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [
zz
Follow steps 1 – 2 in “Specific Scenes”
].
zz
Press the <p> button, press the
<q><r> buttons to choose a color tone,
and then press the <m> button.
zz
A preview is shown of how your shot will
look with the effect applied.
zz
Press the <p> button, press the
<q><r> buttons to choose a color tone,
and then press the <m> button.
zz
A preview is shown of how your shot will
look with the effect applied.
3Shoot.
Standard
Shots resemble toy camera images.
Warm
Images have a warmer tone than with [Standard].
Cool
Images have a cooler tone than with [Standard].
].
2 Choose a color tone.
2 Choose a color tone.
3Shoot.
B/W
Black and white shots.
Sepia
Sepia tone shots.
Blue
Blue and white shots.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1 Choose [ ].
1 Choose [ ].
(= 41) and choose [
Movies
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Try taking some test shots first, to make sure you obtain the desired
results.
46
Special Modes for Other Purposes
Still Images
Auto Shooting after Face Detection
(Smart Shutter)
Auto Shooting after Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
zz
The camera now enters shooting standby
mode, and [Smile Detection on] is
displayed.
2 Aim the camera at a person.
zz
Each time the camera detects a smile, it
will shoot after the lamp lights up.
zz
To pause smile detection, press the <q>
button. Press the <q> button again to
resume detection.
• Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
Before Use
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 37) is only available for the final shot.
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
2 Compose the shot and press
the shutter button halfway.
zz
Make sure a green frame is displayed
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
around the face of the person who will
wink.
3 Press the shutter button all the
way down.
zz
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
zz
The lamp blinks and the self-timer sound
is played.
47
4 Face the camera and wink.
zz
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 37) is only available for the final shot.
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 58). This is useful when including yourself in group photos or similar
shots.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
2 Compose the shot and press
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
the shutter button halfway.
Setting Menu
around the face you focus on and white
frames around other faces.
Accessories
zz
Make sure a green frame is displayed
3 Press the shutter button all the
way down.
Appendix
Index
zz
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
zz
The lamp blinks and the self-timer sound
is played.
48
4 Join the subjects in the
shooting area and look at the
camera.
zz
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 37) is only available for the final shot.
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1 Choose [N].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [N].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
2 Choose the shutter speed.
zz
Press the <o> button, press the
<q><r> buttons to choose the shutter
speed, and then press the <m> button.
3 Check the exposure.
zz
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4Shoot.
• On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your shots.
• With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.
• Set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 63).
49
Before Use
• If the flash fires, your shot may be overexposed. In this case, set the flash to
[!] and shoot again (= 61).
Still Images
High-Speed Continuous Shooting
(High-Speed Burst)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
“Continuous Shooting Speed” (= 156).
1 Choose [ ].
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [
Basic Guide
].
Wi-Fi Functions
Setting Menu
2Shoot.
zz
Hold the shutter button all the way down
to shoot continuously.
zz
Each set of images shot continuously is
Accessories
Appendix
Index
managed as a single group, and only the
first image in that group will be displayed
(= 43).
• The resolution is [ ] (2304 x 1728) and cannot be changed.
• Focus, image brightness, and color are determined by the first shot.
• Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions, camera settings, and the zoom position.
• As more shots are taken, shooting may slow down.
50
Before Use
Basic Guide
P Mode
Advanced Guide
Camera Basics
More discerning shots, in your preferred shooting style
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
• Instructions in this chapter apply to the camera in [G] mode, with the mode switch set to [4].
Wi-Fi Functions
• [G]: Program AE; AE: Auto Exposure
• Before using a function introduced in this chapter in modes other than [G], make sure the function is available in that mode (= 146 – 151).
Setting Menu
Accessories
Shooting in Program AE ([P] Mode)................ 52
Image Brightness (Exposure).......................... 52
Adjusting Image Brightness
(Exposure Compensation)..................................... 52
Locking Image Brightness / Exposure
(AE Lock)............................................................... 53
Changing the Metering Method.............................. 53
Changing the ISO Speed....................................... 54
Correcting Image Brightness (i-Contrast)............... 54
Image Colors..................................................... 55
Flash................................................................... 61
Shooting Range and Focusing........................ 57
Other Settings................................................... 63
Adjusting White Balance........................................ 55
Changing Image Color Tones (My Colors)............. 56
Shooting Close-Ups (Macro).................................. 57
Shooting Distant Subjects (Infinity)........................ 57
Digital Tele-Converter............................................. 57
Changing the AF Frame Mode............................... 58
Changing the Focus Setting................................... 60
Shooting with the AF Lock...................................... 61
Changing the Flash Mode...................................... 61
Shooting with the FE Lock..................................... 62
Appendix
Index
Changing the Compression Ratio
(Image Quality)....................................................... 63
Changing the IS Mode Settings............................. 63
51
Still Images
Movies
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting
style.
1 Enter [G] mode.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 41) and choose [G].
2 Customize the settings as
desired (= 52 – 64), and
then shoot.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. In this
case, try adjusting the ISO speed (= 54) or activating the flash (if subjects
are dark, = 61), which may enable adequate exposure.
• Movies can be recorded in [G] mode as well, by pressing the movie button.
However, some FUNC. (= 20) and MENU (= 21) settings may be
automatically adjusted for movie recording.
• For details on the shooting range in [G] mode, see “Shooting Range”
(= 156).
Before Use
Image Brightness (Exposure)
Still Images
Basic Guide
Movies
Adjusting Image Brightness
(Exposure Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
zz
Press the <o> button. As you watch the
screen, press the <q><r> buttons to
adjust brightness.
zz
The correction level you specified is now
displayed.
zz
When shooting movies, shoot with the
exposure compensation bar displayed.
zz
When shooting still images, press the
<m> button to display the set exposure
compensation amount, and then shoot.
• You can also shoot still images with exposure compensation bar displayed.
• While recording a movie, [&] is displayed, and the exposure is locked.
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
52
Still Images
Movies
Locking Image Brightness / Exposure
(AE Lock)
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 2 0).
zz
The option you configured is now
displayed.
1 Lock the exposure.
zz
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
zz
[&] is displayed, and the exposure is
locked.
zz
To unlock AE, release the shutter button
and press the <o> button again. In this
case, [&] is no longer displayed.
2 Compose the shot and shoot.
• AE: Auto Exposure
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Evaluative
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Determines the average brightness of light across the entire
Center
image area, calculated by treating brightness in the central area
Weighted Avg.
as more important.
Spot
Metering restricted to within the [ ] (Spot AE Point frame),
displayed in the center of the screen.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
53
Still Images
Changing the ISO Speed
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
The option you configured is now
displayed.
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
AUTO
100, 200
400, 800
1600, 3200
Low
For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at
twilight.
High For shooting night scenes, or in dark
rooms.
• To view the automatically determined ISO speed when you have set the ISO
speed to [AUTO], press the shutter button halfway.
• Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some shooting
conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject and camera shake and increase the flash range. However, shots may
look grainy.
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
zz
Press the <n> button, choose
[i-Contrast] on the [4] tab, and then
choose [Auto] (= 21).
zz
Once the setting is complete, [@] is
displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• You can also correct existing images (= 82).
Setting Menu
Accessories
Appendix
Index
54
Image Colors
Still Images
Still Images
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
The option you configured is now
displayed.
Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
zz
Follow the steps in “Adjusting White
Balance” (= 55) to choose [
].
zz
Aim the camera at a plain white subject,
so that the entire screen is white. Press
the <n> button.
zz
The tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Auto
Automatically sets the optimal white balance for the shooting
conditions.
Day Light
For shooting outdoors in fair weather.
Cloudy
For shooting in cloudy conditions, in the shade, or at twilight.
Appendix
Tungsten
For shooting under ordinary incandescent (tungsten) lighting
and similarly colored fluorescent lighting.
Index
Fluorescent
For shooting under warm-white (or similarly colored) or coolwhite fluorescent lighting.
Fluorescent H
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Custom
For manually setting a custom white balance (= 55).
Accessories
55
Still Images
Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia
or black and white.
Before Use
• White balance (= 55) cannot be set in [ ] or [ ] modes.
• With [ ] and [ ] modes, colors other than people’s skin tone may
change. These settings may not produce the expected results with
some skin tones.
Still Images
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
zz
The option you configured is now
displayed.
–
My Colors Off
Vivid
Emphasizes contrast and color saturation, making images
sharper.
Neutral
Tones down contrast and color saturation for subdued images.
Sepia
Creates sepia tone images.
B/W
Creates black and white images.
Positive Film
Combines the effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors resembling
images on positive film.
Lighter Skin Tone
Lightens skin tones.
Darker Skin Tone
Darkens skin tones.
Vivid Blue
Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.
Vivid Green
Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.
Vivid Red
Emphasizes reds in images. Makes red subjects more vivid.
Custom Color
Adjust contrast, sharpness, color saturation, and other
qualities as desired (= 56).
Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1 Access the setting screen.
zz
Follow the steps in “Changing Image
Color Tones (My Colors)” (= 56) to
choose [ ], and then press the <n>
button.
2 Configure the setting.
zz
Press the <o><p> buttons to choose
an option, and then specify the value by
pressing the <q><r> buttons.
zz
For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
zz
Press the <n> button to complete
the setting.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
56
Shooting Range and Focusing
Still Images
Shooting Distant Subjects (Infinity)
Still Images
Shooting Close-Ups (Macro)
To restrict the focus to subjects at close range, set the camera to [e]. For
details on the focusing range, see “Shooting Range” (= 156).
zz
Press the <q> button, press the <q><r>
buttons to choose [e], and then press
the <m> button.
zz
Once the setting is complete, [e] is
displayed.
To restrict the focus to distant subjects, set the camera to [u]. For details
on the focusing range, see “Shooting Range” (= 156).
zz
Press the <q> button, press the <q><r>
buttons to choose [u], and then press
the <m> button.
zz
Once the setting is complete, [u] is
displayed.
• To prevent camera shake, try mounting the camera on a tripod and shooting
with the camera set to [[] (= 31).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Still Images
• If the flash fires, vignetting may occur.
• In the yellow bar display area below the zoom bar, [e] will turn gray
and the camera will not focus.
Before Use
Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
zz
Press the <n> button, choose
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
[Digital Zoom] on the [4] tab, and then
choose the desired option (= 21).
zz
The view is enlarged and the zoom factor
is displayed on the screen.
• The digital tele-converter cannot be used with digital zoom
(= 30) or AF-point zoom (= 36).
57
Before Use
• The shutter speed may be equivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (= 30).
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
zz
Press the <n> button, choose [AF
Frame] on the [4] tab, and then choose
the desired option (= 21).
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
• If faces are not detected when Servo AF (= 60) is set to [On], the
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
• Examples of faces that cannot be detected:
-Subjects that are distant or extremely close
-Subjects that are dark or light
-Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Still Images
Movies
Face AiAF
• Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
• After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
• When the camera detects movement, frames will follow moving subjects,
within a certain range.
1 Choose [Tracking AF].
zz
Follow the steps in “Changing the AF
Frame Mode” (= 58) to choose
[Tracking AF].
zz
[ ] is displayed in the center of the
screen.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Choose a subject to focus on.
zz
Aim the camera so that [
] is on the
desired subject, and then press the <q>
button.
• After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
58
Before Use
zz
When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
zz
If no subject is detected, [ ] is
displayed.
zz
To cancel tracking, press the <q> button
again.
3Shoot.
zz
Press the shutter button halfway. [
]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(= 60).
zz
Press the shutter button all the way down
to shoot.
zz
Even after your shot, [ ] is still
displayed and the camera continues to
track the subject.
• [Servo AF] (= 60) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [4] tab is not available.
• [e] and [u] are not available.
Still Images
Movies
Center
One AF frame is displayed in the center. Effective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot focus
when you press the shutter button halfway.
• To reduce the AF frame size, press the <n> button and set [AF Frame
Size] on the [4] tab to [Small] (= 21).
• The AF frame size is set to [Normal] when you use the digital zoom (= 30)
or digital tele-converter (= 57).
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
• The AF frame position is enlarged when you press the shutter button halfway
and [AF-Point Zoom] (= 36) is set to [On].
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The camera can detect subjects even if you press the shutter button halfway
without pressing the <q> button. After your shot, [ ] is displayed in the
center of the screen.
59
Still Images
Still Images
Changing the Focus Setting
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1 Configure the setting.
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
halfway.
zz
Press the <n> button, choose
zz
Press the <n> button, choose
[Servo AF] on the [4] tab, and then
choose [On] (= 21).
[Continuous AF] on the [4] tab, and then
choose [Off] (= 21).
2Focus.
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the [4] tab is not available.
• Not available when using the self-timer (= 31).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
zz
The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
Before Use
Wi-Fi Functions
On
Helps avoid missing sudden photo opportunities, because the camera
constantly focuses on subjects until you press the shutter button halfway.
Setting Menu
Off
Conserves battery power, because the camera does not focus constantly.
Accessories
Appendix
Index
60
Still Images
Movies
Shooting with the AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.
1 Lock the focus.
zz
With the shutter button pressed halfway,
Before Use
Flash
Basic Guide
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on
the flash range, see “Flash Range” (= 156).
1 Raise the flash.
press the <q> button.
zz
The focus is now locked, and [%] is
zz
Move the <h> switch.
displayed.
zz
To unlock the focus, release the shutter
button and press the <q> button again. In
this case, [%] is no longer displayed.
2 Configure the setting.
zz
Press the <r> button, press the <q><r>
buttons to choose a flash mode, and then
press the <m> button.
zz
The option you configured is now
displayed.
2 Compose the shot and shoot.
• The setting screen cannot be accessed by pressing the <r> button
when the flash is lowered. Move the <h> switch to raise the flash,
then configure the setting.
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
[ ] Auto
Fires automatically in low-light conditions.
[h] On
Fires for each shot.
[Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
61
• In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 63).
• In [Z] mode, even after the flash fires, ensure that the main subject
does not move until the shutter sound is finished playing.
Still Images
Shooting with the FE Lock
Just as with the AE lock (= 53), you can lock the exposure for the flash
shots.
1 Raise the flash and set it to [h]
(= 61).
[!] Off
2 Lock the flash exposure.
For shooting without the flash.
zz
Aim the camera at the subject to shoot
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
zz
The flash fires, and when [(] is
displayed, the flash output level is
retained.
zz
To unlock FE, release the shutter button
and press the <o> button again. In this
case, [(] is no longer displayed.
3 Compose the shot and shoot.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• FE: Flash Exposure
62
Other Settings
Still Images
Movies
Changing the IS Mode Settings
Still Images
1 Access the setting screen.
Changing the Compression Ratio
(Image Quality)
zz
Press the <n> button, choose [IS
Settings] on the [4] tab, and then press
the <m> button (= 21).
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can fit
on a memory card, see “Number of 4:3 Shots per Memory Card” (= 155).
2 Configure the setting.
zz
Choose [IS Mode], and then choose the
desired option (= 21).
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 20).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Continuous
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS) (= 29).
Playback Mode
Shoot Only*
Image stabilization is active only at the moment of shooting.
Wi-Fi Functions
Off
Deactivates image stabilization.
*The setting is changed to [Continuous] for movie recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Setting Menu
Accessories
Appendix
Index
63
Movies
Shooting Movies with Subjects at the Same Size Shown
before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce significant camera shake.
zz
Follow the steps in “Changing the IS
Mode Settings” (= 63) to access the
[IS Settings] screen.
zz
Choose [Dynamic IS], and then choose
[2] (= 21).
• You can also set [IS Mode] to [Off], so that subjects are recorded at the same
size shown before shooting.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
64
Before Use
Basic Guide
Playback Mode
Advanced Guide
Camera Basics
Have fun reviewing your shots, and browse or edit them in many ways
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
• To prepare the camera for these operations, press the <1> button to enter Playback mode.
• It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
P Mode
Playback Mode
Wi-Fi Functions
Viewing............................................................... 66
Switching Display Modes....................................... 67
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)................................... 68
Browsing and Filtering Images........................ 69
Navigating through Images in an Index................. 69
Finding Images Matching Specified Conditions..... 69
Viewing Individual Images in a Group.................... 70
Image Viewing Options..................................... 71
Magnifying Images................................................. 71
Viewing Slideshows............................................... 71
Auto Playback of Related Images
(Smart Shuffle)....................................................... 72
Protecting Images............................................. 73
Using the Menu...................................................... 74
Choosing Images Individually................................ 74
Selecting a Range.................................................. 74
Specifying All Images at Once............................... 75
Erasing Images.................................................. 76
Erasing Multiple Images at Once........................... 76
Rotating Images................................................ 78
Using the Menu...................................................... 78
Deactivating Auto Rotation..................................... 78
Tagging Images as Favorites........................... 79
Editing Still Images........................................... 80
Resizing Images..................................................... 80
Cropping................................................................. 81
Changing Image Color Tones (My Colors)............. 81
Correcting Image Brightness (i-Contrast)............... 82
Correcting Red-Eye................................................ 82
Setting Menu
Accessories
Appendix
Index
Editing Movies................................................... 83
Editing Digest Movies............................................. 84
65
Viewing
Still Images
Before Use
Movies
zz
Movies are identified by a [
play movies, go to step 3.
] icon. To
Advanced Guide
After shooting images or movies, you can view them on the screen as
follows.
Camera Basics
1 Enter Playback mode.
zz
Press the <1> button.
zz
Your last shot is displayed.
Auto Mode / Hybrid
Auto Mode
3 Play movies.
zz
To start playback, press the <m> button,
press the <o><p> buttons to choose
[ ], and then press the <m> button
again.
2 Browse through your images.
zz
To view the previous image, press the
<q> button. To view the next image,
press the <r> button.
4 Adjust the volume.
P Mode
Playback Mode
Setting Menu
volume.
zz
To adjust the volume when the volume
indicator is no longer displayed, press the
<o><p> buttons.
Volume Indicator
hold the <q><r> buttons for at least one
second. In this mode, press the <q><r>
buttons to browse through images.
zz
To return to single-image display, press
the <m> button.
zz
To browse images grouped by shooting
date, press the <o><p> buttons in
Scroll Display mode.
Other Shooting
Modes
Wi-Fi Functions
zz
Press the <o><p> buttons to adjust the
zz
To access Scroll Display mode, press and
Basic Guide
Accessories
Appendix
Index
5 Pause playback.
zz
To pause or resume playback, press the
<m> button.
zz
After the movie is finished, [
displayed.
] is
66
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
• To deactivate Scroll Display, choose MENU (= 21) ► [1] tab ► [Scroll
Display] ► [Off].
• To have the most recent shot displayed when you enter Playback mode,
choose MENU (= 21) ► [1] tab ► [Resume] ► [Last shot].
• To change the transition shown between images, access MENU (= 21) and
choose your desired effect in [1] tab ► [Transition].
Still Images
Still Images
Histogram
High
Low
Dark
Bright
Movies
Switching Display Modes
Press the <p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (= 145).
Movies
zz
The graph in detailed information display
(= 67) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
Simple Information
Display
Still Images
Movies
GPS Information Display
Detailed
Information Display
GPS Information
Still Images
Overexposure Warning (for Image Highlights)
Movies
Washed-out highlights in the image flash on the screen in detailed
information display (= 67).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
zz
Using a smartphone connected to the
No Information
Display
Before Use
camera via Wi-Fi, you can geotag images
on the camera, adding information such
as latitude, longitude, and elevation
(= 109). Geotagged images are labeled
with a [ ] icon in detailed information
display. Press the <o> button to view the
information recorded.
zz
Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
zz
Press the <o> button again to return to
detailed information display.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
67
Before Use
• GPS information display is not available for images that lack this
information.
• [---] is shown instead of numerical values for items not available on
your smartphone or items not recorded correctly.
• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
Time
Movies
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)
View digest movies recorded automatically in [
of still image shooting as follows.
] mode (= 27) on a day
1 Choose a movie.
zz
Press the <n> button, choose [List/
Play Digest Movies] on the [1] tab, and
then choose a date (= 21).
2 Play the movie.
zz
Press the <m> button to start playback.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
1 Choose an image.
zz
Still images shot in [
with an [
Viewing by Date
Digest movies can be viewed by date.
] icon.
] mode are labeled
Setting Menu
Accessories
Appendix
Index
2 Play the movie.
zz
Press the <m> button, and then choose
[
] in the menu (= 20).
zz
The movie recorded automatically on the
day of still image shooting is played back,
from the beginning.
• After a moment, [
] will no longer be displayed when you are using the
camera with information display deactivated (= 67).
68
Browsing and Filtering Images
Still Images
Still Images
Movies
Navigating through Images in an Index
By displaying multiple images in an index, you can quickly find the images
you are looking for.
1 Display images in an index.
zz
Move the zoom lever toward <g> to
display images in an index. Moving the
lever again will increase the number of
images shown.
zz
To display fewer images, move the zoom
lever toward <k>. Fewer images are
shown each time you move the lever.
2 Choose an image.
zz
Press the <o><p><q><r> buttons to
choose an image.
zz
An orange frame is displayed around the
selected image.
zz
Press the <m> button to view the
selected image in single-image display.
Movies
Finding Images Matching Specified
Conditions
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
(= 73) or delete (= 76) these images all at once.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
People
Displays images with detected faces.
Shot Date
Displays the images shot on a specific date.
Other Shooting
Modes
Favorites
Displays images tagged as favorites (= 79).
P Mode
Still image/Movie
Displays still images, movies, or movies shot in
[ ] mode (= 27).
Playback Mode
1 Choose a search condition.
zz
Press the <m> button, choose [
] in the
menu, and choose a condition (= 20).
zz
When you have selected [ ] or [ ],
choose the condition by pressing the
<o><p><q><r> buttons on the screen
displayed, and then press the <m>
button.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 View the filtered images.
zz
Images matching your conditions are
displayed in yellow frames. To view
only these images, press the <q><r>
buttons.
zz
To cancel filtered display, choose [ ] in
step 1.
69
Before Use
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
• To show or hide information, press the <p> button in step 2.
• Options for viewing the images found (in step 2) include “Navigating through
Images in an Index” (= 69), “Magnifying Images” (= 71), and “Viewing
Slideshows” (= 71). You can protect, erase, or print all images found or add
them to a photobook by choosing [Select All Images in Search] in “Protecting
Images” (= 73), “Erasing Multiple Images at Once” (= 76), “Adding
Images to the Print List (DPOF)” (= 133), or “Adding Images to a Photobook”
(= 135).
• If you edit images and save them as new images (= 80 – 84), a message
is displayed, and the images that were found are no longer shown.
Still Images
Viewing Individual Images in a Group
Images shot in [ ] or [ ] mode (= 43, 50) are grouped for display,
and these grouped images can be viewed one at a time.
1 Choose a grouped image.
zz
Press the <q><r> buttons to choose an
image labeled with [
].
2 Choose [ ].
zz
Press the <m> button, and then choose
[
] in the menu (= 20).
Basic Guide
Advanced Guide
Camera Basics
3 View images in the group
individually.
zz
Pressing the <q><r> buttons will display
only images in the group.
zz
To cancel group playback, press the
<m> button, choose [ ] in the menu,
and press the <m> button again
(= 20).
• During group playback (step 3), you can use the menu functions accessed
by pressing the <m> button. You can also browse through images quickly
“Navigating through Images in an Index” (= 69) and magnify them
“Magnifying Images” (= 71). By choosing [All Images in Group] for
“Protecting Images” (= 73), “Erasing Multiple Images at Once” (= 76),
“Adding Images to the Print List (DPOF)” (= 133), or “Adding Images to a
Photobook” (= 135), all images in the group can be manipulated at once.
• To ungroup images so that they are displayed only as single still images,
choose MENU (= 21) ► [1] tab ► [Group Images] ► [Off]. However,
grouped images cannot be ungrouped during individual playback.
] mode as described in step 2 of “Enjoying a
• Simultaneous display in [
Variety of Images from Each Shot (Creative Shot)” (= 43) is only shown
immediately after you shoot.
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
70
Image Viewing Options
Still Images
Viewing Slideshows
Still Images
Magnifying Images
1 Magnify an image.
zz
Moving the zoom lever toward <k> will
zoom in and magnify the image. You
can magnify images up to about 10x by
continuing to hold the zoom lever.
zz
To zoom out, move the zoom lever
toward <g>. You can return to singleimage display by continuing to hold it.
2 Move the display position and
switch images as needed.
Approximate Position of
Displayed Area
Movies
zz
To move the display position, press the
<o><p><q><r> buttons.
zz
While [
] is displayed, you can switch
] by pressing the <m> button.
to [
To switch to other images while zoomed,
press the <q><r> buttons. Press the
<m> button again to restore the original
setting.
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
zz
Press the <m> button, choose [.] in
the menu, and choose the desired option
(= 20).
zz
The slideshow will start after [Loading
image] is displayed for a few seconds.
zz
Press the <n> button to stop the
slideshow.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
• The camera’s power-saving functions (= 18) are deactivated
during slideshows.
Setting Menu
Accessories
• To pause or resume slideshows, press the <m> button.
• You can switch to other images during playback by pressing the <q><r>
buttons. For fast-forward or fast-rewind, hold the <q><r> buttons down.
• In image search mode (= 69), only images matching search conditions are
played.
Appendix
Index
• You can return to single-image display from magnified display by pressing the
<n> button.
71
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1 Access the setting screen.
zz
Press the <n> button, and then
choose [Slideshow] on the [1] tab
(= 21).
2 Configure the settings.
zz
Choose a menu item to configure, and
then choose the desired option (= 21).
zz
To start the slideshow with your settings,
choose [Start] and press the <m>
button.
zz
To return to the menu screen, press the
<n> button.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
Still Images
Auto Playback of Related Images
(Smart Shuffle)
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
1 Choose Smart Shuffle.
zz
Press the <m> button, and then choose
[ ] in the menu (= 20).
zz
Four candidate images are displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
2 Choose an image.
zz
Press the <o><p><q><r> buttons to
choose the image you want to view next.
zz
Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
zz
For full-screen display of the center
image, press the <m> button. To restore
the original display, press the <m>
button again.
zz
Press the <n> button to restore
single-image display.
Accessories
Appendix
Index
72
• Only still images shot with this camera are played back using Smart
Shuffle.
• Smart Shuffle is not available in the following cases:
-There are less than 50 shots taken with this camera
-An unsupported image is currently displayed
-Images are shown in filtered display (= 69)
-During group playback (= 70)
Protecting Images
Still Images
Movies
Protect important images to prevent accidental erasure by the camera
(= 76).
zz
Press the <m> button, and then choose
[:] in the menu (= 20). [Protected]
is displayed.
zz
To cancel protection, repeat this process
and choose [:] again, and then press
the <m> button.
• Protected images on a memory card will be erased if you format the
card (= 117).
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
73
3 Protect the image.
Using the Menu
1 Access the setting screen.
zz
Press the <n> button and choose
[Protect] on the [1] tab (= 21).
zz
Press the <n> button.
A confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
2 Choose a selection method.
zz
Choose a menu item and an option as
desired (= 21).
zz
To return to the menu screen, press the
<n> button.
Choosing Images Individually
1 Choose [Select].
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Selecting a Range
1 Choose [Select Range].
zz
Following step 2 in “Using the Menu”
(= 74), choose [Select Range] and
press the <m> button.
2 Choose a starting image.
zz
Press the <m> button.
zz
Following step 2 in “Using the Menu”
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
(= 74), choose [Select] and press the
<m> button.
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to specify other
images.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
74
3 Choose an ending image.
zz
Press the <r> button to choose [Last
image], and then press the <m> button.
Specifying All Images at Once
1 Choose [Select All Images].
zz
Following step 2 in “Using the Menu”
(= 74), choose [Select All Images] and
press the <m> button.
2 Protect the images.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
zz
Images before the first image cannot be
selected as the last image.
4 Protect the images.
zz
Press the <p> button to choose
[Protect], and then press the <m>
button.
zz
Press the <o><p> buttons to choose
[Protect], and then press the <m>
button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
• To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
75
Still Images
Erasing Images
Movies
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
images (= 73) cannot be erased.
1 Choose an image to erase.
zz
Press the <q><r> buttons to choose an
image.
2 Erase the image.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing
images, because they cannot be recovered. However, protected images
(= 73) cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
zz
Press the <n> button, and then
choose [Erase] on the [1] tab (= 21).
zz
Press the <m> button, and then choose
[a] in the menu (= 20).
zz
After [Erase?] is displayed, press the
<q><r> buttons to choose [Erase], and
then press the <m> button.
zz
The current image is now erased.
zz
To cancel erasure, press the <q><r>
buttons to choose [Cancel], and then
press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
2 Choose a selection method.
zz
Press the <o><p> buttons to choose
a selection method, and then press the
<m> button.
zz
To return to the menu screen, press the
<n> button.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
76
Before Use
Choosing Images Individually
1 Choose [Select].
zz
Following step 2 in “Choosing a Selection
Method” (= 76), choose [Select] and
press the <m> button.
2 Choose an image.
zz
Once you choose an image following
step 2 in “Choosing Images Individually”
(= 74), [ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to specify other
images.
Selecting a Range
1 Choose [Select Range].
zz
Following step 2 in “Choosing a Selection
Method” (= 76), choose [Select
Range] and press the <m> button.
2 Choose images.
zz
Follow steps 2 – 3 in “Selecting a Range”
(= 74 – 75) to specify images.
3 Erase the images.
zz
Press the <p> button to choose [Erase],
and then press the <m> button.
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
3 Erase the image.
Setting Menu
zz
Press the <n> button.
A confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Basic Guide
Specifying All Images at Once
1 Choose [Select All Images].
zz
Following step 2 in “Choosing a Selection
Method” (= 76), choose [Select All
Images] and press the <m> button.
Accessories
Appendix
Index
2 Erase the images.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
77
Still Images
Rotating Images
2 Rotate the image.
zz
Press the <q><r> buttons to choose an
Change the orientation of images and save them as follows.
1 Choose [\].
zz
Press the <m> button, and then choose
[\] in the menu (= 20).
image.
zz
The image is rotated 90° each time you
press the <m> button.
zz
To return to the menu screen, press the
<n> button.
• Rotation is not possible when [Auto Rotate] is set to [Off] (= 78).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
2 Rotate the image.
zz
Press the <q> or <r> button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the <m> button to complete
the setting.
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
zz
Press the <n> button, choose [Auto
Rotate] on the [1] tab, and then choose
[Off] (= 21).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Using the Menu
1 Choose [Rotate].
zz
Press the <n> button and choose
[Rotate] on the [1] tab (= 21).
• Images cannot be rotated (= 78) when you set [Auto Rotate] to
[Off]. Additionally, images already rotated will be displayed in the
original orientation.
• In Smart Shuffle (= 72) mode, even if [Auto Rotate] is set to
[Off], images shot vertically will be displayed vertically, and rotated
images will be displayed in the rotated orientation.
78
Still Images
Tagging Images as Favorites
Movies
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to all
of those images.
• Viewing (= 66), Viewing Slideshows (= 71), Protecting Images
(= 73), Erasing Images (= 76), Adding Images to the Print List
(DPOF) (= 133), Adding Images to a Photobook (= 135)
zz
Press the <m> button, and then choose
[ ] in the menu (= 20).
zz
[Tagged as Favorite] is displayed.
zz
To untag the image, repeat this process
and choose [ ] again, and then press
the <m> button.
Using the Menu
1 Choose [Favorites].
zz
Press the <n> button and choose
[Favorites] on the [1] tab (= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
zz
To untag the image, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to choose additional
images.
3 Finish the setup process.
zz
Press the <n> button.
A confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
• Favorite images will have a three-star rating (
) when transferred
to computers running Windows 8, Windows 7, or Windows Vista. (Does not
apply to movies.)
Accessories
Appendix
Index
79
Editing Still Images
Before Use
4 Save the new image.
zz
Press the <q><r> buttons to choose
• Image editing (= 80 – 83) is only available when the memory
card has sufficient free space.
[OK], and then press the <m> button.
zz
The image is now saved as a new file.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1 Choose [Resize].
zz
Press the <n> button and choose
[Resize] on the [1] tab (= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
3 Choose an image size.
zz
Press the <q><r> buttons to choose the
size, and then press the <m> button.
zz
[Save new image?] is displayed.
zz
Press the <n> button. [Display new
image?] is displayed.
zz
Press the <q><r> buttons to choose
[Yes], and then press the <m> button.
zz
The saved image is now displayed.
• Images cannot be resized to a higher resolution.
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
5 Review the new image.
• Editing is not possible for images shot at a resolution of [
(= 34) or saved as [ ] in step 3.
Basic Guide
]
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
80
Still Images
Cropping
You can specify a portion of an image to save as a separate image file.
1 Choose [Cropping].
Before Use
• Editing is not possible for images shot at a resolution of [
(= 34) or resized to [ ] (= 80).
• Images supported for cropping will have the same aspect ratio after cropping.
• Cropped images will have a lower resolution than uncropped images.
zz
Press the <n> button, and then
choose [Cropping] on the [1] tab
(= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
Cropping Area
3 Adjust the cropping area.
zz
A frame is displayed around the portion of
the image to be cropped.
zz
The original image is shown in the upper
Preview of Image After Cropping
Resolution After Cropping
left, and a preview of the image as
cropped is shown in the lower right.
zz
To resize the frame, move the zoom
lever.
zz
To move the frame, press the
<o><p><q><r> buttons.
zz
To change the frame orientation, press
the <m> button.
zz
Press the <n> button.
4 Save as a new image and
review.
]
Still Images
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see “Changing Image Color Tones (My
Colors)” (= 56).
1 Choose [My Colors].
zz
Press the <n> button, and then
choose [My Colors] on the [1] tab
(= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
3 Choose an option.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <q><r> buttons to choose an
option, and then press the <m> button.
4 Save as a new image and
review.
zz
Follow steps 4 – 5 in “Resizing Images”
(= 80).
zz
Follow steps 4 – 5 in “Resizing Images”
(= 80).
81
Before Use
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired
color.
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
Basic Guide
• The color of images edited using this function may vary slightly from the color
of images shot using My Colors (= 56).
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Camera Basics
Still Images
Other Shooting
Modes
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
zz
Press the <n> button, and then
choose [i-Contrast] on the [1] tab
(= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
3 Choose an option.
zz
Press the <q><r> buttons to choose an
option, and then press the <m> button.
4 Save as a new image and
review.
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
zz
Press the <n> button, and then
choose [Red-Eye Correction] on the [1]
tab (= 21).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image.
3 Correct the image.
Advanced Guide
Auto Mode / Hybrid
Auto Mode
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <m> button.
zz
Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
zz
Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
(= 71).
zz
Follow steps 4 – 5 in “Resizing Images”
(= 80).
82
4 Save as a new image and
review.
zz
Press the <o><p><q><r> buttons to
choose [New File], and then press the
<m> button.
zz
The image is now saved as a new file.
zz
Follow step 5 in “Resizing Images”
(= 80).
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
zz
Following steps 1 – 5 in “Viewing”
(= 66), choose [*] and press the
<m> button.
zz
The movie editing panel and editing bar
are now displayed.
Movie Editing Panel
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
2 Specify portions to cut.
zz
Press the <o><p> buttons to choose
[
] or [
].
zz
To view the portions you can cut
Movie Editing Bar
Before Use
(identified by [ ] on the screen), press
the <q><r> buttons to move [ ]. Cut
the beginning of the movie (from [ ])
by choosing [ ], and cut the end of the
movie by choosing [ ].
zz
If you move [ ] to a position other than a
[ ] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
83
3 Review the edited movie.
zz
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
The edited movie is now played.
zz
To edit the movie again, repeat step 2.
zz
To cancel editing, press the <o><p>
buttons to choose [ ]. Press the <m>
button, press the <q><r> buttons to
choose [OK], and then press the <m>
button again.
4 Save the edited movie.
zz
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
zz
Press the <o><p><q><r> buttons to
choose [New File], and then press the
<m> button.
zz
The movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose [Overwrite]
in step 4. In this case, the original movie will be erased.
• If the memory card lacks sufficient space, only [Overwrite] will be
available.
• Movies may not be saved if the battery pack runs out while saving
is in progress.
• When editing movies, you should use a fully charged battery pack or
an AC adapter kit (sold separately, = 122).
Movies
Editing Digest Movies
Individual chapters (clips) (= 27) recorded in [ ] mode can be erased,
as needed. Be careful when erasing clips, because they cannot be
recovered.
1 Select the clip to erase.
zz
Follow steps 1 – 2 in “Viewing Short
Movies Created When Shooting Still
Images (Digest Movies)” (= 68) to
play a movie created in [ ] mode, and
then press the <m> button to access the
movie control panel.
zz
Press the <q><r> buttons to choose
[ ] or [ ], and then press the <m>
button.
2 Choose [ ].
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
zz
The selected clip is played back
repeatedly.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Confirm erasure.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
zz
The clip is erased, and the short movie is
overwritten.
• [ ] is not displayed if you select a clip when the camera is connected to a
printer.
84
Before Use
Basic Guide
Wi-Fi Functions
Advanced Guide
Camera Basics
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
What You Can Do with Wi-Fi............................ 86
Uploading Images to Web Services....................... 86
Sending Images to a Smartphone.......................... 87
Sending Images to a Computer............................. 87
Printing Images Wirelessly..................................... 87
Sending Images to Another Camera...................... 88
Registering Web Services................................ 88
Registering CANON iMAGE GATEWAY................ 89
Registering Other Web Services............................ 91
Installing CameraWindow on
a Smartphone................................................... 91
Preparing to Register a Computer................... 92
Checking Your Computer Environment.................. 92
Installing the Software............................................ 93
Configuring the Computer for a Wi-Fi Connection
(Windows Only)...................................................... 93
Accessing the Wi-Fi Menu................................ 94
Initial Connection via Wi-Fi..................................... 94
After the Initial Wi-Fi Connection............................ 94
Connecting via an Access Point...................... 95
Using the <{> Button..................................... 106
Registering a Smartphone to the <{> Button...... 106
Registering Image Sync to the <{> Button.......... 107
Clearing Registered Destinations......................... 107
Confirming Access Point Compatibility................... 95
Connecting to WPS-Compatible Access Points..... 96
Connecting to Access Points in the List................. 99
Sending Images Automatically
(Image Sync).................................................. 108
Previous Access Points........................................ 101
Geotagging Images on the Camera............... 109
Shooting Remotely......................................... 110
Editing or Erasing Wi-Fi Settings...................111
Connecting without an Access Point............ 100
Connecting to Another Camera..................... 102
Sending Images............................................... 103
Adding Comments................................................ 104
Saving Images to a Computer........................ 105
Initial Preparations............................................... 108
Sending Images................................................... 109
Setting Menu
Accessories
Appendix
Index
Editing Connection Information.............................111
Returning the Wi-Fi Settings to Default................ 112
85
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi® product. You can wirelessly connect to
and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be
referred to as Wi-Fi.
Sending images via Wi-Fi requires some initial preparation on the camera
and target devices. Preparations and methods of sending images vary
depending on the destination.
Note that before using Wi-Fi (= 94), you will need to register a camera
nickname on the camera.
• Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
Precautions” (= 160) and “Security Precautions” (= 161).
Uploading Images to Web Services
Images can be sent to social network services and other Web services
via CANON iMAGE GATEWAY*. Unsent images on the camera can also
be sent automatically to a computer or Web service via CANON iMAGE
GATEWAY.
*CANON iMAGE GATEWAY is an online photo service available to those who have
purchased this product.
Steps in sending images
SNS, video-sharing
sites, e-mail
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
CANON iMAGE
GATEWAY
Playback Mode
Wi-Fi Functions
• Wi-Fi is a brand name that indicates interoperability certification of wireless
LAN devices.
Setting Menu
Access point
Camera
Computer or smartphone
browsers
Register Web services (= 88)
Connect via an access point (= 95)
Send images (= 103)*
* You can send images to a computer or Web service.
Accessories
Appendix
Index
86
Sending Images to a Smartphone
Send images to smartphones and tablet computers that have Wi-Fi
functions. You can also shoot remotely and geotag your shots from a
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatible
devices are collectively referred to as “smartphones”.
Sending Images to a Computer
Use the software to wirelessly send images from the camera to a computer.
Steps in sending images
Internet
Steps in sending images
App Store/
Google Play
CameraWindow
Camera
Access point
Smartphone
Tablet computer
Install CameraWindow on a smartphone (= 91)
Connect directly (= 100) or via an access point (= 95)
Send images (= 103)
Basic Guide
Advanced Guide
Camera Basics
CameraWindow
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Access point
Camera
Before Use
Computer
Check your computer environment (= 92)
Download and install the software (= 93)
Configure the computer for a Wi-Fi connection (Windows only, = 93)
Connect via an access point (= 95)
Save images to the computer (= 105)
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Printing Images Wirelessly
Send images wirelessly to a PictBridge-compatible printer (supporting DPS
over IP) to print them.
Index
Steps in printing images
Camera
Printer
Access point
Connect directly (= 100) or via an access point (= 95)
Print images (= 129)
87
Sending Images to Another Camera
Use the Wi-Fi function to send images between Canon-brand cameras.
Steps in sending images
Camera
Connect to another camera (= 102)
Send images (= 103)
Camera
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you
want to use.
• A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY and
other Web services.
• Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
• For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.com/
cig/).
• You must have an account with Web services other than CANON iMAGE
GATEWAY if you desire to use them. For further details, check the
websites for each Web service you want to register.
• Separate ISP connection and access point fees may be applicable.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
88
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
1 Log in to CANON iMAGE
GATEWAY and access the
camera settings page.
zz
From a computer or smartphone, access
http://www.canon.com/cig/ and visit the
CANON iMAGE GATEWAY site for your
region.
zz
Once the login screen is displayed,
enter your user name and password
to log in. If you do not have a CANON
iMAGE GATEWAY account, follow
the instructions to complete member
registration (free of charge).
zz
Access the camera settings page.
2 Choose your camera model.
zz
On this camera model, [
in the Wi-Fi menu.
4 Choose [
].
zz
Press the <o><p><q><r> buttons to
choose [
button.
], and then press the <m>
displayed for entering the authentication
code. On this page in step 9, you will
enter the authentication code displayed
on the camera after steps 3 – 8.
3 Access the Wi-Fi menu.
zz
On the camera, access the Wi-Fi menu
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
5 Establish a connection with an
access point.
zz
Press the <q><r> buttons to choose
[Authenticate], and then press the <m>
button.
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
6 Choose an access point.
zz
Press the <o><p> buttons to choose a
network (access point), and then press
the <m> button.
Setting Menu
Accessories
Appendix
Index
] is displayed
zz
Once you choose the model, a page is
(= 94).
Before Use
7 Enter the access point
password.
zz
Press the <m> button to access the
keyboard, and then enter the password
(= 95).
zz
Press the <o><p> buttons to choose
[Next], and then press the <m> button.
89
8 Choose [Auto] and establish the
connection.
Before Use
zz
Complete the setup process on the
smartphone or computer.
zz
Press the <o><p> buttons to choose
Basic Guide
Advanced Guide
[Auto], and then press the <m> button.
Camera Basics
zz
[ ] (= 108) and CANON iMAGE
zz
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9 Enter the authentication code.
zz
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
zz
A six-digit confirmation number is
displayed.
GATEWAY are now added as
] icon changes
destinations, and the [
].
to [
zz
A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
step 2 (= 91).
• You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPSCompatible Access Points” (= 97).
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10 Check the confirmation
numbers and complete the
setup process.
zz
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
90
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera first (= 89).
1 Access the Web service
settings screen.
zz
Follow step 1 in “Registering CANON
iMAGE GATEWAY” (= 89) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2 Configure the Web service you
want to use.
zz
Follow the instructions displayed on the
smartphone or computer to set up the
Web service.
3 Choose [
].
zz
Access the Wi-Fi menu (= 94), press
the <o><p><q><r> buttons to choose
], and then press the <m> button.
[
zz
The Web service settings are now
updated.
• If any configured settings change, follow these steps again to update the
camera settings.
Installing CameraWindow on a
Smartphone
Before connecting your camera to a smartphone, first install the free
dedicated application, CameraWindow, on your smartphone.
1 Connect the smartphone to a
network.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
2 Install CameraWindow.
zz
For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s
N-Mark ( ) will start Google Play on the
smartphone. Once the CameraWindow
download page is displayed, download
and install the app.
zz
For other Android smartphones, find
CameraWindow in Google Play and
download and install the app.
zz
For an iPhone, iPad, or iPod touch, find
CameraWindow in the App Store and
download and install the app.
zz
After installation, use the camera
to establish a connection with the
smartphone (= 95, 100).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
91
• When using NFC, keep the following points in mind.
-Avoid strong impact between the camera and smartphone. This
may damage the devices.
-Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions.
-Do not place other objects between the camera and smartphone.
Also, note that camera or smartphone covers or similar accessories
may block communication.
• For details on this application (supported smartphones and included functions),
refer to the Canon website.
• Not all NFC-compatible smartphones have an N-Mark ( ). For details, refer to
the smartphone user manual.
Preparing to Register a Computer
Prepare to register a computer. To save images to the computer wirelessly,
you must install CameraWindow.
Checking Your Computer Environment
The camera can connect via Wi-Fi to computers running the following
operating systems. For detailed system requirements and compatibility
information, including support in new operating systems, visit the Canon
website.
Windows
Operating
System
Windows 8/8.1
Windows 7 SP1
Mac OS
Mac OS X 10.9
Mac OS X 10.8.2 or later
Mac OS X 10.7
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
• Windows 7 Starter and Home Basic editions are not supported.
• Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Accessories
Appendix
Index
92
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
1 Download the software.
zz
With a computer connected to the
Internet, access http://www.canon.com/
icpd/.
zz
Access the site for your country or region.
zz
Download the software.
2 Install the files.
zz
Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
zz
Installation may take some time,
depending on computer performance and
the Internet connection.
zz
Click [Finish] or [Restart] on the screen
after installation.
Configuring the Computer for a Wi-Fi
Connection (Windows Only)
On a computer running Windows, configure the following settings before
connecting the camera to the computer wirelessly.
1 Confirm that the computer is
connected to an access point.
zz
For instructions on checking your network
connection, refer to the computer user
manual.
2 Configure the setting.
zz
Click in the following order: [Start] menu
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
zz
In the application that opens, follow the
on-screen instructions and configure the
setting.
• The following Windows settings are configured when you run the utility in
step 2.
-Turn on media streaming.
This will enable the camera to see (find) the computer to access via Wi-Fi.
-Turn on network discovery.
This will enable the computer to see (find) the camera.
-Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
-Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
• Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
93
Accessing the Wi-Fi Menu
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when
connecting to other devices via Wi-Fi.
1 Access the Wi-Fi menu.
zz
Press the <1> button to turn the camera
on.
zz
Press the <o> button.
2 Enter a nickname.
zz
Press the <m> button to access the
keyboard, and then enter a nickname
(= 22).
zz
Up to 16 characters can be used.
zz
Press the <o><p> buttons to choose
[OK], and then press the <m> button.
zz
The Wi-Fi menu is displayed.
Before Use
• When connecting wirelessly to any device other than a computer, a memory
card must be inserted in the camera. Additionally, the memory card must
contain images before you can access Web services or connect to a printer
wirelessly.
• To change the camera’s nickname, choose MENU (= 21) ► [3] tab ►
[Wi‑Fi Settings] ► [Change Device Nickname].
• If the Wi-Fi menu is not displayed but only the information changes when
you press the <o> button, first press the <p> button to switch from detailed
information display (= 67).
• A message will be displayed if the nickname you attempt to enter in step 2
begins with a symbol or space. Press the <m> button and enter a different
nickname.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
After the Initial Wi-Fi Connection
• Once you have connected to devices via Wi-Fi, recent destinations will
be listed first when you access the Wi-Fi menu by pressing the <o>
button. You can easily connect again by pressing the <o><p> buttons
to choose the device name and then pressing the <m> button.
• To add a new device, display the device selection screen by pressing the
<q><r> buttons, and then configure the setting.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• If you prefer not to display recent target devices, choose MENU (= 21) ►
[3] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].
94
Connecting via an Access Point
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Wi-Fi” (= 154).
If you are already using Wi-Fi, confirm the following items. For instructions
on checking network settings, refer to the access point user manual.
• If system administrator status is needed to adjust network settings,
contact the system administrator for details.
• These settings are very important for network security. Exercise
adequate caution when changing these settings.
Before Use
Check sheet
Basic Guide
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.
Advanced Guide
○ None
○ WEP (open system
Network authentication / data encryption (encryption
authentication)
method / encryption mode)
○ WPA-PSK (TKIP)
The method for encrypting data during wireless transmission. ○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network
key”.
Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
○1
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with
your access point to check if it supports WPS.
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing MENU (= 21) ► [3] tab ► [Wi-Fi Settings] ►
[Check MAC Address].
Setting Menu
Accessories
Appendix
Index
95
Connecting to WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi‑Fi. You can use either Push Button Configuration Method or PIN Method
for settings on a WPS supported device.
1 Confirm that the target device is
connected to the access point.
zz
This step is not required when connecting
to Web services.
zz
For instructions on checking the
connection, refer to the device and
access point user manuals.
2 Access the Wi-Fi menu
(= 94).
3 Choose the target device.
zz
Press the <o><p><q><r> buttons to
choose the target device, and then press
the <m> button.
zz
To connect to a smartphone, choose [{].
zz
To connect to a computer, choose [ ].
zz
To connect to a printer, choose [2].
zz
To connect to a Web service, choose
the service icon. If multiple recipients
or sharing options are used with a Web
service, choose the desired item on the
[Select Recipient] screen by pressing the
<o><p> buttons, and then press the
<m> button.
4 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
zz
To connect to a smartphone or printer,
when the [Waiting to connect] screen
(= 100) is displayed, press the
<q><r> buttons to choose [Switch
Network], and then press the <m>
button.
zz
A list of detected access points will be
displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
96
5 Choose [WPS Connection].
zz
Press the <o><p> buttons to choose
[WPS Connection], and then press the
<m> button.
6 Choose [PBC Method].
zz
Press the <o><p> buttons to choose
[PBC Method], and then press the <m>
button.
7 Establish the connection.
zz
On the access point, hold down the WPS
connection button for a few seconds.
zz
On the camera, press the <m> button to
go to the next step.
zz
The camera will connect to the access
point.
zz
If you have selected [{], [2], or [ ] in
step 3, devices connected to the access
point are listed on the [Select a Device]
screen displayed next.
zz
If you have selected a Web service in
step 3, go to step 12.
8 For a smartphone connection:
Start CameraWindow.
zz
For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
( , = 91) will start CameraWindow on
the smartphone.
zz
For other smartphones, start
CameraWindow on the smartphone.
zz
The first time CameraWindow is opened,
register a smartphone nickname to be
displayed on the camera.
zz
Once the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
9 To connect to a smartphone,
printer, or computer:
Choose the target device.
zz
Press the <o><p> buttons to choose
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
the target device name, and then press
the <m> button.
zz
If you have selected a smartphone, go to
step 11.
zz
If you have selected a printer or
Macintosh computer, go to step 12.
97
10 If you have selected a computer
running Windows in step 9 for
the first time:
Install a driver.
zz
When the screen at left is displayed on
the camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
zz
Double-click the connected camera icon.
zz
Driver installation will begin.
zz
After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
11 For a smartphone connection:
Adjust the privacy setting.
zz
Press the <q><r> buttons to choose
[Yes], and then press the <m> button.
zz
You can now use the smartphone to
browse, import, or geotag (= 109)
images on the camera or shoot remotely
(= 110).
12 Send or print the images.
zz
The screen displayed when the devices
are connected varies depending on the
target device.
zz
When the camera is connected to a
smartphone or Web service, an image
transfer screen is displayed.
zz
For instructions on sending images, see
“Sending Images” (= 103).
zz
When the camera is connected to a
computer, the camera screen is blank.
Follow the steps in “Saving Images to a
Computer” (= 105) to save images to
the computer.
zz
When the camera is connected to a
printer, you can print by following the
same steps as for printing via USB. For
details, see “Printing Images” (= 129).
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 11. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 11.
• To change privacy settings for smartphones added to the list,
choose the smartphone whose settings you want to change from
[Edit a Device] in step 4, and then choose [View Settings].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• If you chose [PIN Method] in step 6, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included
with your access point.
• To add multiple destinations, repeat this procedure from the first step.
98
3 Enter the access point
Previous Access Points
You can reconnect to any previous access points automatically by following
step 4 in “Connecting to WPS-Compatible Access Points” (= 96).
• To reconnect to the access point, confirm that the target device is already
connected to it, and then follow the procedure from step 9. Note that this
step is not required when connecting to Web services.
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure from step 5.
Connecting to Access Points in the List
1 View the listed access points.
zz
View the listed networks (access
points) as described in steps 1 – 4 of
“Connecting to WPS-Compatible Access
Points” (= 96).
2 Choose an access point.
zz
Press the <o><p> buttons to choose a
network (access point), and then press
the <m> button.
password.
zz
Press the <m> button to access the
keyboard, and then enter the password
(= 95).
zz
Press the <o><p> buttons to choose
[Next], and then press the <m> button.
4 Choose [Auto].
zz
Press the <o><p> buttons to choose
[Auto], and then press the <m> button.
zz
If you selected [{], [2], or [ ] as the
target device, see “Connecting to WPSCompatible Access Points”, starting with
step 9 (= 97).
zz
If you selected a Web service as the
destination, see “Connecting to WPSCompatible Access Points”, starting with
step 12 (= 98).
• To determine the access point password, check on the access point itself or
refer to the user manual.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, press the <o><p> buttons to choose [Next], and
then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
99
Connecting without an Access Point
Before Use
zz
The camera’s SSID is displayed.
When connecting to a smartphone or printer via Wi-Fi, you can use the
camera as an access point (Camera Access Point mode) instead of using
another access point.
Similarly, no access point is used in camera-to-camera connections
(= 102).
1 Access the Wi-Fi menu
(= 94).
2 Choose the target device.
zz
Press the <o><p><q><r> buttons to
choose the target device, and then press
the <m> button.
zz
To connect to a smartphone, choose [{].
zz
To connect to a printer, choose [2].
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
4 Connect the target device to the
network.
zz
In the smartphone or printer’s Wi-Fi
setting menu, choose the SSID (network
name) displayed on the camera to
connect to it.
5 For a smartphone connection:
Start CameraWindow.
zz
For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
( , = 91) will start CameraWindow on
the smartphone.
zz
For other smartphones, start
CameraWindow on the smartphone.
zz
The first time CameraWindow is opened,
register a smartphone nickname to be
displayed on the camera.
zz
Once the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
100
6 Choose the target device.
zz
Press the <o><p> buttons to choose
the target device name, and then press
the <m> button.
7 For a smartphone connection:
Adjust the privacy setting.
zz
Press the <q><r> buttons to choose
[Yes], and then press the <m> button.
zz
You can now use the smartphone to
browse, import, or geotag (= 109)
images on the camera or shoot remotely
(= 110).
Before Use
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 7. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 7.
• To change privacy settings for smartphones added to the list,
choose the smartphone whose settings you want to change from
[Edit a Device] in step 3, and then choose [View Settings].
• To add multiple devices, repeat this procedure from the first step.
• For better security, you can require password input on the screen in step 3
by accessing MENU (= 21) and choosing [3] tab ► [Wi-Fi Settings] ►
[Password] ► [On]. In this case, in the password field on the device in step 4,
enter the password displayed on the camera.
Previous Access Points
zz
The screen displayed when the devices
You can reconnect to any previous access points automatically by following
step 3 in “Connecting without an Access Point” (= 100).
• To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
zz
When the camera is connected to a
• When reconnecting via a previous access point, connect the target
device to the access point in step 4.
8 Send or print the images.
are connected varies depending on the
target device.
smartphone, an image transfer screen is
displayed.
zz
For instructions on sending images, see
“Sending Images” (= 103).
zz
When the camera is connected to a
printer, you can print by following the
same steps as for printing via USB. For
details, see “Printing Images” (= 129).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Connecting to WPS-Compatible Access Points” from step 5
(= 97).
101
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1 Access the Wi-Fi menu
(= 94).
2 Choose camera.
zz
Press the <o><p><q><r> buttons to
choose [4], and then press the <m>
button.
Before Use
zz
When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” (= 103).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
• To add multiple cameras, repeat this procedure from the first step.
• Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
Appendix
Index
[Add a Device], and then press the <m>
button.
zz
Follow steps 1 – 3 on the target camera
too.
zz
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
102
Sending Images
3 Send the images.
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
instead of the camera (= 105).
1 Choose [Select and send].
zz
Press the <o><p><q><r> buttons to
choose [Select and send], and then press
the <m> button.
2 Choose images.
zz
Press the <o><p><q><r> buttons to
choose an image to send, and then press
the <m> button. [ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to choose additional
images.
zz
After you finish choosing images, press
the <n> button.
zz
Press the <o><p><q><r> buttons to
choose [ ], and then press the <m>
button. Press the <o><p> buttons to
choose the resolution (size) of images
to send, and then press the <n>
button.
zz
Press the <o><p><q><r> buttons to
choose [Send], and then press the <m>
button.
zz
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
zz
Image transfer will begin. The screen
darkens during image transfer.
zz
After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
zz
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
103
• Keep your fingers or other objects off the Wi-Fi antenna area (= 3).
Covering this may decrease the speed of your image transfers.
• Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
• When sending movies to smartphones, note that the supported image quality
varies depending on the smartphone. For details, refer to the smartphone user
manual.
• To disconnect from the camera, press the <n> button, press the <q><r>
buttons to choose [OK] on the confirmation screen, and then press the <m>
button. You can also use the smartphone to end the connection.
• Up to 50 images can be sent together at once. You can send movies together
as long as the total playback time is within two minutes. However, Web
services may limit the number of images or length of movies you can send. For
details, refer to the Web service you are using.
• On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
• Only images larger than the resolution you selected in step 3 will be resized.
• Movies cannot be resized.
• To send only one of the displayed images, choose [Resize] on the screen in
step 1, change the size, and choose [Send this image].
• Sending images to Web services will take less time when resending images
you have already sent that are still on the CANON iMAGE GATEWAY server.
Before Use
Adding Comments
Using the camera, you can add comments to images that you send to
e-mail addresses, social networking services, etc. The number of characters
and symbols that can be entered may differ depending on the Web service.
1 Access the screen for adding
comments.
zz
Press the <o><p><q><r> buttons to
choose [ ], and then press the <m>
button.
2 Add a comment (= 22).
3 Send the image.
zz
Follow the steps in “Sending Images”
(= 103) to send the image.
• When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
104
Saving Images to a Computer
When sending images to a computer, use the computer instead of the
camera.
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some
software excluded).
1 Display CameraWindow.
zz
In Windows, access CameraWindow by
clicking [Downloads Images From Canon
Camera].
zz
In Mac OS, CameraWindow is
automatically displayed when a Wi-Fi
connection is established between the
camera and computer.
2 Import images.
zz
Click [Import Images from Camera], and
then click [Import Untransferred Images].
zz
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
zz
Click [OK] in the screen that is displayed
after image import is complete. For
instructions on viewing images on a
computer, refer to “Software Instruction
Manual” (= 127).
Before Use
• Movies will take longer to import since the file size is larger than still images.
• To disconnect from the camera, turn off the camera.
• You can also specify to save all images or only selected images to the
computer, and you can change the destination folder. Refer to “Software
Instruction Manual” (= 127) for details.
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon
in the Dock.
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
-It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
-Images shot in vertical orientation may be saved in horizontal orientation.
-Image protection settings may be cleared from images saved to a computer.
-Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
file sizes.
-Some functions provided by the software may not be available, such as
movie editing.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
105
Using the <{> Button
Once you have registered a smartphone or Image Sync (= 108) to
the <{> button, you can connect to the registered destination simply by
pressing the <{> button.
Registering a Smartphone to the <{> Button
Once you have connected to a smartphone initially via Wi-Fi by pressing the
<{> button, you can simply press the <{> button after that to connect again
for viewing and saving camera images on connected devices.
1 Press the <{> button.
2 Choose the destination.
zz
Press the <q><r> buttons to choose [{],
and then press the <m> button.
3 Establish the connection.
zz
Connect to the smartphone as described
in steps 5 – 9 in “Connecting to WPSCompatible Access Points” (= 97) or
steps 4 – 6 in “Connecting without an
Access Point” (= 100 – 101).
zz
After a connection is established with the
smartphone, the smartphone nickname
is displayed on the camera. (This screen
will close in about one minute.)
zz
You can now use the smartphone to
import images from the camera. (The
camera cannot be used to send images
to the smartphone.)
zz
Use the smartphone to end the
connection; the camera will automatically
turn off.
zz
From now on, you can simply press the
<{> button to connect to the registered
smartphone.
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 2. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 5 – 9 in “Connecting to WPSCompatible Access Points” (= 97).
• All images in the camera can be viewed from the connected
smartphone. Note that if you have assigned the <{> button,
[View Settings] (= 111) is not available.
• One smartphone can be registered to the <{> button. If you wish to register a
different smartphone, clear the one currently registered (= 107) first.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
106
Registering Image Sync to the <{> Button
By registering Image Sync to the <{> button, you can simply press the
<{> button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending
Images Automatically (Image Sync)” (= 108).
1 Prepare the camera.
zz
Register [ ] as the destination (= 89).
zz
Install the software on the destination
computer, and configure the camera
settings (= 93).
2 Press the <{> button.
Clearing Registered Destinations
zz
Press the <n> button, and then
choose [Mobile Device Connect Button]
on the [3] tab (= 21).
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
zz
After a confirmation message is
displayed, press the <m> button.
• Registered destinations are also cleared when you reset Wi-Fi settings
(= 112).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
3 Choose the destination.
zz
Press the <q><r> buttons to choose
[
], and then press the <m> button.
zz
The camera will automatically reconnect
Accessories
Appendix
Index
to any previous access points and send
the images (= 108).
zz
From now on, you can simply press the
<{> button to send images.
107
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Install and configure the software on the destination computer.
1 Install the software.
zz
Install the software on a computer
connected to the Internet (= 93).
2 Register the camera.
zz
Windows: In the taskbar, right-click [ ],
and then click [Add new camera].
zz
Mac OS: In the menu bar, click [ ], and
then click [Add new camera].
zz
A list of cameras linked to CANON
iMAGE GATEWAY (= 89) is displayed.
Choose the camera from which images
are to be sent.
zz
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].
3 Choose the type of images
to send (only when sending
movies with images).
zz
Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(= 21).
zz
Press the <o><p> buttons to choose
[Image Sync], and then press the
<q><r> buttons to choose [Stills/
Movies].
• To choose a Web service as the destination, follow the steps in “Registering
Other Web Services” (= 91) to update the camera settings.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
108
Geotagging Images on the Camera
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server. Stored
images are regularly erased, so make sure to turn on the computer and
save the images.
zz
Follow the steps in “Connecting to WPS-
Compatible Access Points” (= 96) to
choose [ ].
zz
Once the connection is established, the
images are sent.
zz
When the images have been sent
successfully to the CANON iMAGE
GATEWAY server, [ ] is displayed on
the screen.
zz
Images are automatically saved to the
computer when you turn it on.
zz
Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer is off.
GPS data recorded on a smartphone using the dedicated CameraWindow
application (= 91) can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
• Before shooting, make sure the date and time and your home time
zone are set correctly. (See “Setting the Date and Time” (= 12).)
Additionally, in [Time Zone] (= 115), specify any shooting
destinations that are in other time zones.
• The smartphone you will use for geotagging must be authorized to
view the images on the camera (= 98, 101).
• Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• When sending images, you should use a fully charged battery pack
or an AC adapter kit (sold separately, = 122).
• Even if images were imported to the computer through a different method, any
images not sent to the computer via CANON iMAGE GATEWAY will be sent to
the computer.
• Sending is faster when the destination is a computer on the same network as
the camera, because images are sent via the access point instead of CANON
iMAGE GATEWAY. Note that images stored on the computer are sent to
CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
109
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
1 Secure the camera.
zz
Once remote shooting begins, the
camera lens will come out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
2 Connect the camera and
smartphone (= 87).
zz
In the privacy settings (= 98, 101),
choose [Yes].
3 Choose remote shooting.
zz
In CameraWindow (= 91) on the
smartphone, choose remote shooting.
zz
The camera lens will come out. Do not
press near the lens, and make sure no
objects will obstruct it.
zz
Once the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.
zz
At this time, a message is displayed on
the camera, and all operations except
pressing the power button are disabled.
Before Use
• The camera works in [G] mode during remote shooting. However,
some FUNC. and MENU settings you have configured in advance
may be changed automatically.
• Movie shooting is not available.
• In camera settings, the smartphone must be allowed to view camera
images (= 98, 101).
• Any jerky subject motion shown on the smartphone due to the connection
environment will not affect recorded images.
• No AF frames are displayed. Capture a test image to check the focus.
• Captured images are not transferred to the smartphone. Use the smartphone
to browse and import images from the camera.
• Remote control is also possible from the smartphone assigned to the <{>
button (= 106).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4Shoot.
zz
Use the smartphone to shoot.
110
Editing or Erasing Wi-Fi Settings
zz
Press the <o><p> buttons to choose
Edit or erase Wi-Fi settings as follows.
an item to edit, and then press the <m>
button.
zz
The items you can change depend on
what device or service the camera will
access.
Editing Connection Information
1 Access the Wi-Fi menu
(= 94).
2 Choose a device to edit.
zz
Press the <o><p><q><r> buttons to
choose the icon of the device to edit, and
then press the <m> button.
Connection
Configurable Items
[Edit a Device], and then press the <m>
button.
4 Choose a device to edit.
zz
Press the <o><p> buttons to choose
the device to edit, and then press the
<m> button.
c
Web
Services
O
O
–
O
–
–
–
O
O
O
–
4
{
[Change Device Nickname] (= 111)
O
O
[View Settings] (= 98, 101)
–
[Erase Connection Info] (= 112)
O
O : Configurable – : Not configurable
3 Choose [Edit a Device].
zz
Press the <o><p> buttons to choose
Before Use
5 Choose an item to edit.
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Following step 5 in “Editing Connection
Information” (= 111), choose [Change
Device Nickname] and press the <m>
button.
zz
Select the input field and press the <m>
button. Use the keyboard displayed to
enter a new nickname (= 22).
111
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
zz
Following step 5 in “Editing Connection
Information” (= 111), choose [Erase
Connection Info] and press the <m>
button.
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera
to another person, or dispose of it.
1 Choose [Wi-Fi Settings].
zz
Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(= 21).
zz
After [Erase?] is displayed, press the
<q><r> buttons to choose [OK], and
then press the <m> button.
zz
The connection information will be
erased.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
2 Choose [Reset Settings].
zz
Press the <o><p> buttons to choose
[Reset Settings], and then press the
<m> button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
3 Restore the default settings.
zz
Press the <q><r> buttons to choose
Appendix
Index
[OK], and then press the <m> button.
zz
The Wi-Fi settings are now reset.
• Resetting the Wi-Fi settings will also clear all Web service settings. Be sure
that you want to reset all Wi-Fi settings before using this option.
• To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the
[3] tab (= 119).
112
Before Use
Basic Guide
Setting Menu
Advanced Guide
Camera Basics
Customize or adjust basic camera functions for greater convenience
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Adjusting Basic Camera Functions............... 114
Silencing Camera Operations.............................. 114
Adjusting the Volume........................................... 114
Hiding Hints and Tips........................................... 114
Date and Time...................................................... 114
World Clock.......................................................... 115
Lens Retraction Timing........................................ 115
Using Eco Mode................................................... 115
Power-Saving Adjustment.................................... 116
Screen Brightness................................................ 116
Hiding the Start-Up Screen.................................. 116
Formatting Memory Cards................................... 117
File Numbering..................................................... 118
Date-Based Image Storage.................................. 118
Metric / Non-Metric Display.................................. 118
Checking Certification Logos............................... 119
Display Language................................................ 119
Adjusting Other Settings...................................... 119
Restoring Defaults................................................ 119
Setting Menu
Accessories
Appendix
Index
113
Adjusting Basic Camera Functions
MENU (= 21) functions on the [3] tab can be configured. Customize
commonly used functions as desired, for greater convenience.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. (= 20) or
MENU (= 21) items. If you prefer, you can deactivate this information.
zz
Choose [Hints & Tips], and then choose
Silencing Camera Operations
[Off].
Silence camera sounds and movies as follows.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
zz
Choose [Mute], and then choose [On].
P Mode
Playback Mode
Date and Time
Adjust the date and time as follows.
• Operation can also be silenced by holding down the <p> button as you turn
the camera on.
• Sound is not played during movies (= 66) if you mute camera sounds. To
restore sound during movies, press the <o> button. Adjust volume with the
<o><p> buttons, as needed.
Before Use
zz
Choose [Date/Time], and then press the
<m> button.
zz
Press the <q><r> buttons to choose
an option, and then press the <o><p>
buttons to adjust the setting.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
zz
Choose [Volume], and then press the
<m> button.
zz
Choose an item, and then press the
<q><r> buttons to adjust the volume.
114
World Clock
Lens Retraction Timing
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (= 12).
The lens is normally retracted for safety about one minute after you press
the <1> button in Shooting mode (= 18). To have the lens retracted
immediately after you press the <1> button, set the retraction timing to
[0 sec.].
zz
Choose [Lens Retract], and then choose
[0 sec.].
1 Specify your destination.
zz
Choose [Time Zone], and then press the
<m> button.
zz
Press the <o><p> buttons to choose
[ World], and then press the <m>
button.
zz
Press the <q><r> buttons to choose the
destination.
zz
To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
<o><p> buttons, and then choose [ ]
by pressing the <q><r> buttons.
zz
Press the <m> button.
2 Switch to the destination time
zone.
zz
Press the <o><p> buttons to choose
[ World], and then press the <n>
button.
zz
[ ] is now shown on the shooting screen
(= 144).
• Adjusting the date or time while in [ ] mode (= 13) will automatically
Home] time and date.
update your [
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Using Eco Mode
Setting Menu
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1 Configure the setting.
zz
Choose [Eco Mode], and then choose
Accessories
Appendix
Index
[On].
zz
[
] is now shown on the shooting
screen (= 144).
zz
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
115
2Shoot.
zz
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Power-Saving Adjustment
Before Use
Screen Brightness
Adjust screen brightness as follows.
zz
Choose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
the <m> button.
zz
After choosing an item, press the
<q><r> buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
(= 115) to [On].
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (= 18).
zz
Choose [Power Saving], and then press
Basic Guide
P Mode
• For maximum brightness, press and hold the <p> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [3] tab.) To restore
the original brightness, press and hold the <p> button again for at least one
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Choose [Start-up Image], and then
choose [Off].
116
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
1 Access the [Format] screen.
zz
Choose [Format], and then press the
<m> button.
2 Choose [OK].
zz
Press the <o><p> buttons to choose
[Cancel], press the <q><r> buttons to
choose [OK], and then press the <m>
button.
3 Format the memory card.
zz
To begin the formatting process, press
the <o><p> buttons to choose [OK],
and then press the <m> button.
zz
When formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
Before Use
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
Basic Guide
Advanced Guide
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
zz
On the screen in step 2 of “Formatting
Memory Cards” (= 117), press the
<o><p> buttons to choose [Low Level
Format], and then press the <q><r>
buttons to select this option. A [ ] icon is
displayed.
zz
Follow steps 2 – 3 in “Formatting Memory
Cards” (= 117) to continue with the
formatting process.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Low-level formatting takes longer than “Formatting Memory Cards” (= 117),
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
117
File Numbering
Date-Based Image Storage
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
zz
Choose [File Numbering], and then
choose an option.
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
zz
Choose [Create Folder], and then choose
[Daily].
zz
Images will now be saved in folders
created on the shooting date.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Continuous
Images are numbered consecutively (until the 9999th shot is taken/
saved) even if you switch memory cards.
Auto Reset
Image numbering is reset to 0001 if you switch memory cards, or
when a new folder is created.
• Regardless of the option selected in this setting, shots may be numbered
consecutively after the last number of existing images on newly inserted
memory cards. To start saving shots from 0001, use an empty (or formatted
(= 117)) memory card.
• Refer to “Software Instruction Manual” (= 127) for information on the card
folder structure and image formats.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(= 109) and elsewhere from m/cm to ft/in as needed.
zz
Choose [Units], and then choose [ft/in].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
118
Checking Certification Logos
Before Use
Adjusting Other Settings
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
zz
Choose [Certification Logo Display], and
then press the <m> button.
Basic Guide
The following settings can also be adjusted on the [3] tab.
• [Video System] (= 126)
Advanced Guide
• [Ctrl via HDMI] (= 124)
Camera Basics
• [Wi-Fi Settings] (= 85)
Auto Mode / Hybrid
Auto Mode
• [Mobile Device Connect Button] (= 107)
Other Shooting
Modes
Restoring Defaults
P Mode
If you accidentally change a setting, you can restore default camera
settings.
Playback Mode
Wi-Fi Functions
1 Access the [Reset All] screen.
Display Language
zz
Choose [Reset All], and then press the
Change the display language as needed.
zz
Choose [Language
the <m> button.
Setting Menu
<m> button.
], and then press
zz
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the <m> button and immediately pressing the <n> button.
Accessories
2 Restore default settings.
zz
Press the <q><r> buttons to choose
Appendix
[OK], and then press the <m> button.
zz
Default settings are now restored.
• The following functions are not restored to default settings.
-[3] tab settings [Date/Time] (= 114), [Time Zone] (= 115), [Language
(= 119), and [Video System] (= 126)
-Custom white balance data you have recorded (= 55)
-Shooting mode (= 41)
-Wi-Fi settings (= 85)
Index
]
119
Before Use
Basic Guide
Accessories
Advanced Guide
Camera Basics
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
System Map..................................................... 121
Optional Accessories..................................... 122
Power Supplies.................................................... 122
Flash Unit............................................................. 122
Other Accessories................................................ 122
Printers................................................................. 123
Using Optional Accessories.......................... 123
Playback on a TV................................................. 123
Powering the Camera with Household Power...... 126
Using the Software.......................................... 127
Software............................................................... 127
Computer Connections via a Cable..................... 127
Saving Images to a Computer.............................. 128
Printing Images............................................... 129
Easy Print............................................................. 129
Configuring Print Settings.................................... 130
Printing Movie Scenes......................................... 133
Adding Images to the Print List (DPOF)............... 133
Adding Images to a Photobook............................ 135
Setting Menu
Accessories
Appendix
Index
120
Before Use
System Map
Use of genuine Canon accessories is recommended.
Included Accessories
Wrist Strap
Battery Charger
CB-2LY/CB-2LYE*1
Battery Pack
NB-6LH*1
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longer be
available.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
USB Cable (camera end: Mini-B)*2
Playback Mode
Memory Card
Power
Card Reader
Computer
Wi-Fi Functions
Setting Menu
HDMI Cable (camera end: Type D)*3
Accessories
Cables
Appendix
AC Adapter Kit
ACK-DC40
AV Cable AVC-DC400
Flash Unit
TV/Video
System
Index
Canon-Brand PictBridgeCompatible Printers
High-Power Flash
HF-DC2
*1Also available for purchase separately.
*2A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3Use a commercially available cable no longer than 2.5 m.
121
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-6LH
zz
Rechargeable lithium-ion battery
Battery Charger CB-2LY/CB-2LYE
zz
Charger for Battery Pack NB-6LH
• The battery pack includes a convenient cover which you can attach to know
the charging status at a glance. Attach the cover so that  is visible on a
charged battery pack, and attach it so that  is not visible on an uncharged
battery pack.
• Battery Pack NB-6L is also supported.
AC Adapter Kit ACK-DC40
zz
For powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or computer. Cannot be used to
charge the battery pack in the camera.
Before Use
• The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
• For power outlets in a different format, use a commercially available
adapter for the plug. Never use an electrical transformer designed
for traveling, which may damage the battery pack.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Flash Unit
High-Power Flash HF-DC2
zz
External flash for illuminating subjects
that are out of range of the built-in flash.
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Other Accessories
Setting Menu
Interface Cable IFC-400PCU
zz
For connecting the camera to a computer
or printer.
AV Cable AVC-DC400
Accessories
Appendix
Index
zz
Connect the camera to a TV to enjoy
playback on the larger TV screen.
122
Printers
Canon-Brand PictBridgeCompatible Printers
zz
Printing images without a computer is
possible by connecting the camera to
a Canon-brand PictBridge-compatible
printer.
For details, visit your nearest Canon
retailer.
Still Images
Movies
Still Images
Movies
Using Optional Accessories
Playback on a TV
Before Use
Basic Guide
Advanced Guide
Camera Basics
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
• Some information may not be displayed on the TV (= 145).
Still Images
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Movies
Playback on a High-Definition TV
You can view your shots on a TV by connecting the camera to an HDTV
with a commercially available HDMI cable (not exceeding 2.5 m, with a
Type D terminal on the camera end). Movies shot at a resolution of [ ] or
[ ] can be viewed in high definition.
1 Make sure the camera and TV
are off.
2 Connect the camera to the TV.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
On the TV, insert the cable plug fully into
the HDMI input as shown.
123
zz
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Still Images
Movies
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
Depending on the TV, you may need to adjust some TV settings. For
details, refer to the TV manual.
1 Configure the setting.
3 Turn the TV on and switch to
video input.
zz
Switch the TV input to the video input you
connected the cable to in step 2.
4 Turn the camera on.
zz
Press the <1> button to turn the camera
on.
zz
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zz
When finished, turn off the camera and
TV before disconnecting the cable.
zz
Press the <n> button, choose
[Ctrl via HDMI] on the [3] tab, and then
choose [Enable] (= 21).
2 Connect the camera to the TV.
zz
Follow steps 1 – 2 in “Playback on a
High-Definition TV” (= 123) to connect
the camera to the TV.
3 Display images.
zz
Turn on the TV. On the camera, press the
<1> button.
zz
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Camera operating sounds are not played while the camera is connected to an
HDTV.
124
4 Control the camera with the TV
remote.
zz
Press the <q><r> buttons on the remote
to browse images.
zz
To display the camera control panel,
press the OK/Select button. Select
control panel options by pressing the
<q><r> buttons to choose an option,
and then pressing the OK/Select button
again.
Still Images
Playback on a Standard-Definition TV
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
1 Make sure the camera and TV
are off.
Black or white
.
Return
Closes the menu.
Group Playback
Displays sets of images shot in [
] or [ ] mode
(= 43, 50). (Only displayed when a grouped image
is selected.)
Play Movie
Starts movie playback. (Only displayed when a movie
is selected.)
Slideshow
Starts slideshow playback. To switch images during
playback, press the <q><r> buttons on the remote
control.
Index Playback
Displays multiple images in an index.
l Change Display
2 Connect the camera to the TV.
zz
On the TV, insert the cable plugs fully into
Yellow
Camera Control Panel Options Shown on the TV
Movies
the video inputs as shown.
Yellow
Black
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
zz
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Setting Menu
Accessories
Appendix
Index
Switches display modes (= 67).
• Pressing buttons, such as the <n> button, on the camera will switch
control to the camera itself, which will prevent remote control until you return to
single-image display.
• Moving the zoom lever on the camera will switch control to the camera itself,
which will prevent remote control until you return to single-image display.
• The camera may not always respond correctly even if the remote is for an
HDMI CEC-compatible TV.
3 Display images.
zz
Follow steps 3 – 4 in “Playback on a
High-Definition TV” (= 124) to display
images.
125
Before Use
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose [Video
System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen. However, AF-Point Zoom (= 36) is not available.
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Insert the coupler.
zz
Follow step 1 in “Inserting the Battery
Terminals
Pack and Memory Card” (= 11) to
open the cover.
zz
Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Pack and Memory Card” (= 11)).
zz
Follow step 4 in “Inserting the Battery
Pack and Memory Card” (= 11) to
close the cover.
3 Connect the adapter to the
coupler.
zz
Open the cover and insert the adapter
plug fully into the coupler.
4 Connect the power cord.
zz
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
zz
Turn the camera on and use it as desired.
zz
When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
126
Using the Software
The software available for download from the Canon website is introduced
below, with instructions for installation and saving images to a computer.
Software
After downloading the software from the Canon website and installing it, you
can do the following things on your computer.
CameraWindow
zz
Import images and change camera settings
ImageBrowser EX
zz
Manage images: view, search, and organize
zz
Print and edit images
• Internet access is required, and any ISP account charges and
access fees must be paid separately.
Software Instruction Manual
Refer to the instruction manual when using the software. The manual can
be accessed from the help system of software (some software excluded).
Before Use
Computer Connections via a Cable
Basic Guide
Advanced Guide
Checking Your Computer Environment
The software can be used on the following computers. For detailed system
requirements and compatibility information, including support in new
operating systems, visit the Canon website.
Windows
Operating
System*
Windows 8/8.1
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS
Mac OS X 10.9
Mac OS X 10.8
Mac OS X 10.7
*When sending images to a computer via Wi-Fi, check the system requirements in
“Checking Your Computer Environment” (= 92).
• Check the Canon website for the latest system requirements, including
supported OS versions.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Installing the Software
For software installation instructions, see “Installing the Software” (= 93).
Appendix
Index
127
Before Use
Saving Images to a Computer
zz
Choose [Downloads Images From Canon
Camera] and then click [OK].
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some
software excluded).
Basic Guide
Advanced Guide
Camera Basics
1 Connect the camera to the
Auto Mode / Hybrid
Auto Mode
computer.
zz
With the camera turned off, open the
zz
Double-click [
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
].
Other Shooting
Modes
P Mode
Playback Mode
CameraWindow
3 Save the images to the
computer.
zz
Click [Import Images from Camera], and
zz
Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2 Turn the camera on to access
CameraWindow.
zz
Press the <1> button to turn the camera
on.
zz
Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
then click [Import Untransferred Images].
zz
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
zz
After images are saved, close
CameraWindow, press the <1> button
to turn the camera off, and unplug the
cable.
zz
For instructions on viewing images on a
computer, refer to “Software Instruction
Manual” (= 127).
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Windows: Follow the steps introduced
below.
zz
In the screen that displays, click the [
link to modify the program.
]
128
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• Windows Vista or XP: To start CameraWindow, click [Downloads Images From
Canon Camera] on the screen displayed when you turn the camera on in step
2. If CameraWindow is not displayed, click the [Start] menu and choose [All
Programs] ► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].
• Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
-It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
-Images shot in vertical orientation may be saved in horizontal orientation.
-Image protection settings may be cleared from images saved to a computer.
-Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
file sizes.
-Some functions provided by the software may not be available, such as
movie editing.
Still Images
Printing Images
Movies
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare orders or print images for
photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the USB cable.
1 Make sure the camera and
printer are off.
2 Connect the camera to the
printer.
zz
Open the cover. Holding the smaller
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
cable plug in the orientation shown, insert
the plug fully into the camera terminal.
zz
Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
129
3 Turn the printer on.
4 Turn the camera on.
Still Images
Configuring Print Settings
zz
Press the <1> button to turn the camera
1 Access the printing screen.
on.
zz
Follow steps 1 – 6 in “Easy Print”
(= 129 – 130) to access the screen
at left.
5 Choose an image.
zz
Press the <q><r> buttons to choose an
2 Configure the settings.
image.
zz
Press the <o><p> buttons to choose an
6 Access the printing screen.
item, and then press the <q><r> buttons
to choose an option.
zz
Press the <m> button, choose [c], and
press the <m> button again.
Default
Date
File No.
Both
Off
7 Print the image.
Default
zz
Press the <o><p> buttons to choose
[Print], and then press the <m> button.
zz
Printing now begins.
zz
To print other images, repeat the above
procedures starting from step 5 after
printing is finished.
zz
When you are finished printing, turn the
camera and printer off and disconnect
the cable.
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file number added.
–
Matches current printer settings.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Off
–
Appendix
On
Uses information from the time of shooting to print under
optimal settings.
Index
Red-Eye 1
Corrects red-eye.
No. of Copies Choose the number of copies to print.
Cropping
–
Specify a desired image area to print (= 131).
Paper
Settings
–
Specify the paper size, layout, and other details
(= 131).
• For Canon-brand PictBridge-compatible printers (sold separately), see
“Printers” (= 123).
130
Still Images
Cropping Images before Printing
By cropping images before printing, you can print a desired image area
instead of the entire image.
Before Use
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with
[Date Stamp
] selected.
1 Choose [Cropping].
zz
After following step 1 in “Configuring Print
Settings” (= 130) to access the printing
screen, choose [Cropping] and press the
<m> button.
zz
A cropping frame is now displayed,
indicating the image area to print.
2 Adjust the cropping frame as
needed.
zz
To resize the frame, move the zoom
lever.
zz
To move the frame, press the
<o><p><q><r> buttons.
zz
To rotate the frame, press the <m>
button.
zz
Press the <n> button, press the
<o><p> buttons to choose [OK], and
then press the <m> button.
3 Print the image.
Still Images
Choosing Paper Size and Layout before Printing
1 Choose [Paper Settings].
zz
After following step 1 in “Configuring Print
Settings” (= 130) to access the printing
screen, choose [Paper Settings] and
press the <m> button.
2 Choose a paper size.
zz
Press the <o><p> buttons to choose an
option, and then press the <m> button.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Choose a type of paper.
zz
Press the <o><p> buttons to choose an
option, and then press the <m> button.
zz
Follow step 7 in “Easy Print” (= 130)
to print.
131
4 Choose a layout.
zz
Press the <o><p> buttons to choose
an option.
zz
When choosing [N-up], press the
<q><r> buttons to specify the number of
images per sheet.
zz
Press the <m> button.
5 Print the image.
Available Layout Options
Default
Matches current printer settings.
Bordered
Prints with blank space around the image.
Borderless
Borderless, edge-to-edge printing.
N-up
Choose how many images to print per sheet.
ID Photo
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of
4:3.
Fixed Size
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Still Images
Printing ID Photos
1 Choose [ID Photo].
zz
Following steps 1 – 4 in “Choosing Paper
Size and Layout before Printing” (= 131
– 132), choose [ID Photo] and press the
<m> button.
2 Choose the long and short side
length.
zz
Press the <o><p> buttons to choose
an item. Choose the length by pressing
the <q><r> buttons, and then press the
<m> button.
3 Choose the printing area.
zz
Follow step 2 in “Cropping Images before
Printing” (= 131) to choose the printing
area.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4 Print the image.
132
Movies
Printing Movie Scenes
1 Access the printing screen.
zz
Follow steps 1 – 6 in “Easy Print”
(= 129 – 130) to choose a movie. The
screen at left is displayed.
2 Choose a printing method.
zz
Press the <o><p> buttons to choose
[ ], and then press the <q><r> buttons
to choose the printing method.
3 Print the image.
Still Images
Adding Images to the Print List (DPOF)
Batch printing (= 135) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print list.
zz
Press the <n> button, and then
Movie Printing Options
Single
Prints the current scene as a still image.
Sequence
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
• To cancel printing in progress, press the <m> button.
• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridgecompatible printers from CP720/CP730 and earlier models.
choose [Print Settings] on the [2] tab.
Choose and configure items as desired
(= 21).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Standard
Print Type
Date
File No.
Clear DPOF
data
One image is printed per sheet.
Index
Smaller versions of multiple images are printed
per sheet.
Both
Both standard and index formats are printed.
On
Images are printed with the shooting date.
Off
–
On
Images are printed with the file number.
Off
–
On
All image print list settings are cleared after
printing.
Off
–
Index
133
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
• Index printing is not available on some Canon-brand PictBridge-compatible
printers (sold separately).
• The date is printed in a format matching setting details in [Date/Time] on the
[3] tab (= 12).
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
zz
Press the <n> button, choose
[Select Images & Qty.] on the [2] tab,
and then press the <m> button.
2 Choose an image.
zz
Press the <q><r> buttons to choose an
3 Specify the number of prints.
zz
Press the <o><p> buttons to specify
the number of prints (up to 99).
zz
To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
zz
Printing quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
zz
When finished, press the <n> button
to return to the menu screen.
Still Images
Setting Up Printing for a Range of Images
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 134), choose
[Select Range] and press the <m>
button.
zz
Follow steps 2 – 3 in “Selecting a Range”
(= 74 – 75) to specify images.
zz
Press the <o><p> buttons to choose
[Order], and then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
image, and then press the <m> button.
zz
You can now specify the number of
copies.
zz
If you specify index printing for the image,
it is labeled with a [ ] icon. To cancel
index printing for the image, press the
<m> button again. [ ] is no longer
displayed.
134
Still Images
Setting Up Printing for All Images
Still Images
Printing Images Added to the Print List (DPOF)
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 134), choose
[Select All Images] and press the <m>
button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Still Images
Clearing All Images from the Print List
zz
When images have been added to the
print list (= 133 – 135), the screen
at left is displayed after you connect
the camera to a PictBridge-compatible
printer. Press the <o><p> buttons to
choose [Print now], and then simply press
the <m> button to print the images in the
print list.
zz
Any DPOF print job that you temporarily
stop will be resumed from the next image.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 134), choose
[Clear All Selections] and press the <m>
button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Before Use
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when ordering
printed photobooks online or printing photobooks with your own printer.
Setting Menu
Accessories
Appendix
Index
Choosing a Selection Method
zz
Press the <n> button, choose
[Photobook Set-up] on the [1] tab, and
then choose how you will select images.
135
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• After importing images to your computer, also refer to “Software Instruction
Manual” (= 127) and the printer manual for further information.
Still Images
Still Images
Adding All Images to a Photobook
zz
Following the procedure in “Choosing
a Selection Method” (= 135), choose
[Select All Images] and press the <m>
button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Adding Images Individually
1 Choose [Select].
zz
Following the procedure in “Choosing
a Selection Method” (= 135), choose
[Select] and press the <m> button.
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
zz
[ ] is displayed.
zz
To remove the image from the photobook,
press the <m> button again. [ ] is no
longer displayed.
zz
Repeat this process to specify other
images.
zz
When finished, press the <n> button
to return to the menu screen.
Still Images
Removing All Images from a Photobook
zz
Following the procedure in “Choosing
a Selection Method” (= 135), choose
[Clear All Selections] and press the <m>
button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
136
Before Use
Basic Guide
Appendix
Advanced Guide
Camera Basics
Helpful information when using the camera
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Troubleshooting.............................................. 138
On-Screen Messages...................................... 141
On-Screen Information................................... 144
Shooting (Information Display)............................. 144
Playback (Detailed Information Display).............. 145
Functions and Menu Tables........................... 146
Functions Available in Each Shooting Mode........ 146
FUNC. Menu........................................................ 147
4 Shooting Tab Menu........................................ 149
3 Set Up Tab Menu............................................ 152
1 Playback Tab Menu........................................ 152
2 Print Tab Menu................................................ 152
Playback Mode FUNC. Menu............................... 153
Handling Precautions..................................... 153
Specifications.................................................. 154
Setting Menu
Accessories
Appendix
Index
137
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Shooting
Cannot shoot.
• In Playback mode (= 65), press the shutter button halfway (= 19).
Strange display on the screen under low light (= 19).
Strange display on the screen when shooting.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Note that the following display problems are not recorded in still images but are
recorded in movies.
• The screen may flicker and horizontal banding may appear under fluorescent or LED
lighting.
Auto Mode / Hybrid
Auto Mode
• Confirm that the memory card/battery cover is fully closed (= 11).
No date stamp is added to images.
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
• Configure the [Date Stamp
] setting (= 32). Note that date stamps are not
added to images automatically, merely because you have configured the [Date/Time]
(= 12) setting.
P Mode
Nothing happens when the power button is pressed.
• Confirm that the battery pack is charged (= 10).
• Confirm that the battery pack is inserted facing the correct way (= 11).
The battery pack runs out of power quickly.
• Battery performance decreases at low temperatures. Try warming the battery pack a
little by putting it in your pocket, for example, ensuring that the terminals do not touch
any metal objects.
• If these measures do not help and the battery pack still runs out of power soon after
charging, it has reached the end of its life. Purchase a new battery pack.
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
The lens is not retracted.
Wi-Fi Functions
[h] flashes on the screen when the shutter button is pressed, and
shooting is not possible (= 28).
Setting Menu
[
] is displayed when the shutter button is pressed halfway (= 28).
• Set [IS Mode] to [Continuous] (= 63).
• Raise the flash and set the flash mode to [h] (= 61).
• Increase the ISO speed (= 54).
• Mount the camera on a tripod or take other measures to keep it still. In this case, you
should set [IS Mode] to [Off] (= 63).
The battery pack is swollen.
Shots are out of focus.
Display on a TV
Camera images look distorted or not displayed on a TV (= 126).
Playback Mode
• Date stamps are not added in shooting modes (= 151) in which this setting cannot
be configured (= 32).
• Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it off again (= 11).
• Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from fitting in the camera, contact a Canon
Customer Support Help Desk.
Other Shooting
Modes
Accessories
Appendix
Index
• Press the shutter button halfway to focus on subjects before pressing it all the way
down to shoot (= 19).
• Make sure subjects are within focusing range (= 156).
• Set [AF-assist Beam] to [On] (= 37).
• Confirm that unneeded functions such as macro are deactivated.
• Try shooting with focus lock or AF lock (= 59, 61).
138
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
• Raise the flash and set the flash mode to [h] (= 61).
• Adjust brightness by using exposure compensation (= 52).
• Adjust contrast by using i-Contrast (= 54, 82).
• Use AE lock or spot metering (= 53).
Subjects look too bright, highlights are washed-out.
• Lower the flash and set the flash mode to [!] (= 26).
• Adjust brightness by using exposure compensation (= 52).
Before Use
Subjects are affected by red-eye (= 35).
• Set [Red-Eye Lamp] to [On] (= 38) to activate the red-eye reduction lamp
(= 3) in flash shots. Note that while the red-eye reduction lamp is on (for about
one second), it is not possible to shoot, because the lamp is counteracting red-eye.
For best results, have subjects look at the red-eye reduction lamp. Also try increasing
the lighting in indoor scenes and shooting at closer range.
• Edit images using red-eye correction (= 82).
Recording to the memory card takes too long, or continuous shooting
is slower.
P Mode
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” (= 146 – 151).
Playback Mode
Wi-Fi Functions
The elapsed time shown is incorrect, or recording is interrupted.
Shots look too dark despite the flash firing (= 28).
• Use the camera to format the memory card, or switch to a card that supports highspeed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (= 117,
156).
• Shoot within flash range (= 156).
• Lower the flash and set the flash mode to [!] (= 26).
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
• Lower the ISO speed (= 54).
• High ISO speeds in some shooting modes may cause grainy images (= 42).
Auto Mode / Hybrid
Auto Mode
Shooting settings or FUNC. menu settings are not available.
Shooting Movies
Subjects in flash shots look too bright, highlights are washed-out.
Camera Basics
Other Shooting
Modes
• Use AE lock or spot metering (= 53).
• Increase the ISO speed (= 54).
Advanced Guide
• Use the camera to perform low-level formatting of the memory card (= 117).
• Reduce the lighting on subjects.
• Shoot within flash range (= 156).
Basic Guide
[
] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Use the camera to perform low-level formatting of the memory card (= 117).
Setting Menu
Accessories
Appendix
Index
• Lower the image quality (= 35).
• Switch to a memory card that supports high-speed recording (= 156).
Zooming is not possible.
• Zooming is not possible when shooting movies in [
] mode (= 45).
Subjects look distorted.
• Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
139
Before Use
Playback
Wi-Fi
Playback is not possible.
Cannot access the Wi-Fi menu by pressing the <o> button.
Basic Guide
• Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to “Software Instruction Manual” (= 127) for details
on folder structure and file names.
• The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try
again.
Advanced Guide
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (= 117).
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
• Adjust the volume (= 66) if you have activated [Mute] (= 114) or the sound in
the movie is faint.
• No sound is played for movies shot in [
recorded in this mode.
] mode (= 45) because audio is not
Memory Card
The memory card is not recognized.
• In Playback mode, the Wi-Fi menu cannot be accessed during detailed information
display, magnified display, or index display. Switch to single-image display and a
viewing mode other than detailed information display. Similarly, the Wi-Fi menu
cannot be accessed during group playback or filtered image display according to
specified conditions. Cancel group or filtered image playback.
• The Wi-Fi menu cannot be accessed while the camera is connected to a printer,
computer, or TV via a cable. Disconnect the cable.
Cannot add a device/destination.
• A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera first, and then add new devices/
destinations (= 111).
• Use a computer or smartphone to register Web services (= 88).
• To add a smartphone, first install the dedicated application CameraWindow on your
smartphone (= 91).
• To add a computer, first install the software CameraWindow on your computer. Also
check your computer and Wi-Fi environment and settings (= 92, 95).
• Restart the camera, with the memory card in it (= 18).
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
Computer
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <m> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Cannot connect to the access point.
• Confirm that the access point channel is set to a channel supported by the camera
(= 154). Note that instead of auto channel assignment, it is advisable to specify a
supported channel manually.
140
Cannot send images.
• The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
• The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• Images are not sent to CANON iMAGE GATEWAY or other Web services if you move
or rename image files or folders on the computer that received images sent using
Image Sync via an access point (= 108). Before moving or renaming these image
files or folders on the computer, make sure the images have already been sent to
CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
• Images cannot be resized to be bigger than the resolution setting of their original size.
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (= 11).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (= 11).
Cannot record!
• Movies cannot be resized.
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (= 11).
Images take a long time to send./The wireless connection is disrupted.
Memory card error (= 117)
• Multiple images may take a long time to send. Try resizing the image to [
to reduce sending time (= 103).
• If the same error message is displayed even after you have formatted a supported
memory card (= 2) and have inserted it facing the correct way (= 11), contact
a Canon Customer Support Help Desk.
] or [
]
• Movies may take a long time to send.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [ ] is displayed.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
• Reset the Wi-Fi settings (= 112).
Insufficient space on card
• There is not enough free space on the memory card to shoot (= 24, 40, 51)
or edit images (= 80 – 83). Either erase unneeded images (= 76) or insert a
memory card with enough free space (= 11).
Charge the battery (= 10)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (= 73)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
141
Before Use
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to
category/Unselectable image.
A camera error was detected (error number)
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (= 71), Smart Shuffle* (= 72), Rotate* (= 78), Favorites (= 79),
Edit* (= 80 – 83), Print List* (= 133), and Photobook Set-up* (= 135).
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
Advanced Guide
File Error
Auto Mode / Hybrid
Auto Mode
• Grouped images cannot be processed (= 43).
Invalid selection range
• When specifying a range for image selection (= 74, 77, 134), you attempted to
choose an initial image that was after the final image, or vice-versa.
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Correct printing (= 129) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Basic Guide
Camera Basics
Other Shooting
Modes
Print error
P Mode
Exceeded selection limit
• Check the paper size setting (= 131). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Playback Mode
• More than 998 images were selected for Print List (= 133) or Photobook Set-up
(= 135). Choose 998 images or less.
Ink absorber full
Wi-Fi Functions
• Print List (= 133) or Photobook Set-up (= 135) settings could not be saved
correctly. Reduce the number of selected images and try again.
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Setting Menu
• You attempted to choose more than 500 images in Protect (= 73), Erase (= 76),
Favorites (= 79), Print List (= 133), or Photobook Set-up (= 135).
Wi-Fi
Naming error!
• No access points were recognized. Check the access point settings (= 95).
Appendix
• A device could not be found. Turn the camera off and on again, and retry the
connection.
Index
• The folder could not be created or images could not be recorded, because the highest
supported folder number (999) for storing images on the card has been reached and
the highest supported image number (9999) for images in folders has been reached.
On the [3] tab, change [File Numbering] to [Auto Reset] (= 118), or format the
memory card (= 117).
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
Connection failed
Accessories
• Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
• The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
No access points found
• Check to make sure that the access point is turned on.
• When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
• Check the access point security settings (= 95).
142
IP address conflict
• Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
• You may be in an environment where Wi-Fi signals are obstructed.
• Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,
and other devices that operate on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
• Check the connected device to make sure it is not experiencing errors.
Other Shooting
Modes
Sending failed
Memory card error
P Mode
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk.
Playback Mode
Receiving failed
Insufficient space on card
Wi-Fi Functions
• There is not enough free space on the memory card in the target camera to receive
images. Erase images to create space on the memory card, or insert a memory card
with sufficient space.
Setting Menu
Accessories
Receiving failed
Memory card locked
Appendix
• The write-protect tab of the memory card in the camera to receive the images is set to
the locked position. Slide the write-protect tab to the unlocked position.
Index
Receiving failed
Naming error!
• When the highest folder number (999), and the highest image number (9999) have
been reached on the receiving camera, images cannot be received.
Insufficient space on server
• Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
• Save the images sent via Image Sync (= 108) to your computer.
Check network settings
• Check to make sure your computer can connect to the Internet with the current
network settings.
143
On-Screen Information
Date stamp
(= 32)
ISO speed (= 54)
Grid lines (= 36)
AE lock (= 53),
FE lock (= 62)
Shutter speed
Time zone (= 115)
Aperture value
Shooting (Information Display)
*In [
Exposure
compensation level
(= 52)
Image stabilization
(= 63)
i-Contrast (= 54)
Zoom bar (= 25)
IS mode icon
(= 29)
Blink detection
(= 37)
Hybrid Auto mode
(= 27)
Exposure
compensation bar
(= 52)
] mode, indicates the number of shots available.
(Blinking red)
[Charge the battery]
Camera Basics
Auto Mode / Hybrid
Auto Mode
Playback Mode
Display
Focusing range
(= 57), AF lock
(= 61)
Shooting mode
(= 146), Scene
icon (= 29)
Flash mode
(= 61)
Red-eye correction
(= 35)
AF frame (= 58)
Spot AE point frame
(= 53)
Advanced Guide
P Mode
Battery Level
Still image
compression
(= 63),
Resolution (= 34)
Recordable shots*
(= 155)
Movie quality
(= 35)
Remaining time
(= 156)
Digital zoom
magnification
(= 30), Digital teleconverter (= 57)
Basic Guide
Other Shooting
Modes
An on-screen icon or message indicates the battery charge level.
Battery level
(= 144)
White balance
(= 55)
My Colors (= 56)
Drive mode
(= 33)
Eco mode (= 115)
Self-timer (= 31)
Camera shake
warning (= 28)
Metering method
(= 53)
Before Use
Details
Wi-Fi Functions
Sufficient charge
Setting Menu
Slightly depleted, but sufficient
Accessories
Nearly depleted—charge the battery pack soon
Appendix
Depleted—charge the battery pack immediately
Index
144
Playback (Detailed Information Display)
Still images:
Resolution (= 155)
Movies: Playback
time (= 156)
Protection (= 73)
Favorites (= 79)
My Colors
(= 56, 81),
Creative Shot effect
(= 44)
Red-eye correction
(= 35, 82)
Shooting date/time
(= 12)
• Some information may not be displayed when viewing images on a TV
(= 123).
Summary of Movie Control Panel in “Viewing” (= 66)
Movies
(= 25, 66),
High-speed burst
(= 50), Switch
display (GPS
information)
(= 67)
Shooting mode
(= 146)
ISO speed
(= 54), Playback
speed (= 45)
Exposure
compensation level
(= 52)
White balance
(= 55)
Histogram (= 67)
Group playback
(= 70),
Image editing
(= 80 – 83),
Digest movies
(= 68)
Compression (image
quality) (= 63)
/ Resolution
(= 34), MP4
(movies)
Image Sync
(= 108)
Battery level
(= 144)
Metering method
(= 53)
Folder number - File
number (= 118)
Current image no. /
Total no. of images
Shutter speed
(still images), Image
quality / Frame rate
(movies) (= 35)
Aperture value
Flash (= 61)
i-Contrast
(= 54, 82)
Focusing range
(= 57)
File size
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Exit
P Mode
Play
Playback Mode
Slow Motion (Press the <q><r> buttons to adjust the playback speed. No
sound is played.)
Wi-Fi Functions
Skip Backward* or Previous Clip (= 84) (To continue skipping backward,
keep holding down the <m> button.)
Setting Menu
Previous Frame (For fast-rewind, keep holding down the <m> button.)
Accessories
Next Frame (For fast-forward, keep holding down the <m> button.)
Skip Forward* or Next Clip (= 84) (To continue skipping forward, keep
holding down the <m> button.)
*
Edit (= 83)
c
Shown when the camera is connected to a PictBridge-compatible printer
(= 129).
Appendix
Index
Erase Clip (displayed when a digest movie is selected (= 84))
*Displays the frame approx. 4 sec. before or after the current frame.
• During movie playback, you can skip back or forward (or to the previous or
next clip) by pressing the <q><r> buttons.
145
Before Use
Functions and Menu Tables
Basic Guide
Functions Available in Each Shooting Mode
Advanced Guide
Shooting Mode
Function
Exposure Compensation (= 52)
Flash (= 61)
h
Z
!
AE Lock/FE Lock (= 53, 62)*2
AF Lock (= 61)
Focusing Range (= 57)
e u
Tracking AF Subject Selection (= 58)
Screen Display (= 19)
No Information Display
Information Display
*1 Not available, but switches to [Z] in some cases.
*2 FE lock not available in [!] flash mode.
4
G
I
Camera Basics
P
t
N
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
–
O
–
O
O
O
O
O
–
O
O
O
O
O
O
O
–
–
O
–
O
–
O
–
O
–
–
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
O
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
*1
O
–
–
O
–
–
O
O
O
O
O
O
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
–
–
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
*1
O
–
–
O
–
–
O
–
–
O
–
–
O
O
O
O
O
O
O
–
–
O
O
–
O
O
O
O
O
O
–
–
–
O
O
O
O
*1
O
–
–
O
O
O
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
O Available or set automatically. – Not available.
146
Before Use
FUNC. Menu
Basic Guide
Shooting Mode
4
Function
Metering Method (= 53)
 
My Colors (= 56)
    * 1  * 1 
 
White Balance (= 55)
 
 
 
 
         
ISO Speed (= 54)
AUTO
100 / 200 / 400 / 800 / 1600 / 3200
*2
Advanced Guide
G
I
P
t
N
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
–
O
–
O
O
–
O
–
O
–
O
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
Self-Timer (= 31)
] [ $
Self-Timer Settings (= 32)
Delay*3
Shots*4
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Drive Mode (= 33)
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 Cannot be set to 0 seconds in modes without selection of the number of shots.
*4 One shot (cannot be modified) in modes without selection of the number of shots.
O Available or set automatically. – Not available.
147
Before Use
Shooting Mode
4
Function
Still Image Aspect Ratio (= 34)
     
Resolution (= 34)
 
G
I
P
t
N
Advanced Guide
–
–
O
O
O
O
O
O
–
–
–
–
*1
–
O
O
O
O
O
O
Camera Basics
O
–
O
–
O
O
O
O
O
O
–
–
O
–
–
O
–
O
–
–
O
–
O
–
Auto Mode / Hybrid
Auto Mode
O
–
O
–
O
O
–
O
–
O
O
–
O
–
O
O
–
O
–
–
–
–
–
–
–
–
O
–
O
–
O
–
Other Shooting
Modes
–
–
O
O
O
O
O
O
O
–
–
–
–
–
–
–
O
O
O
P Mode
Playback Mode
–
O
–
–
–
Compression (= 63)
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*2
O
O
O
O
O
O
O
Movie Quality (= 35)
 
Basic Guide
*1 Only [ ] and [ ] are available.
*2 Synchronizes with the aspect ratio setting and is automatically set (= 45).
O Available or set automatically. – Not available.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
148
Before Use
4 Shooting Tab Menu
Basic Guide
Shooting Mode
4
G
I
Function
AF Frame (= 58)
Face AiAF*1
Tracking AF
Center
O
–
–
O
–
–
O
–
–
O
O
O
O
O
O
O
–
–
O
–
–
O
–
–
O
O
O
O
–
–
O
O
O
AF Frame Size (= 59)*2
Normal
Small
–
–
–
–
–
–
O
O
O
O
–
–
–
–
–
–
O
O
–
–
Digital Zoom (= 30)
Standard
Off
1.6x/2.0x
O
O
–
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
–
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
–
–
O
O
O
–
–
–
O
–
O
–
O
O
–
–
–
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
–
–
O
O
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
–
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
–
–
–
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
–
–
–
–
–
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
Continuous AF (= 60)
On
Off
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
*1 Operation when no faces are detected varies by shooting mode.
*2 Available when the AF frame is set to [Center].
] mode.
*3 [On] when subject movement is detected in [
N
O
O
O
Servo AF (= 60)
On
Off*3
O
–
–
t
O
O
O
AF-Point Zoom (= 36)
On
Off
–
Advanced Guide
P
–
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
O Available or set automatically. – Not available.
149
Before Use
Shooting Mode
Function
AF-assist Beam (= 37)
On
Off
4
G
I
O
O
O
O
O
O
O
O
t
N
O
O
O
O
–
O
O
Camera Basics
O
O
O
O
–
–
–
O
O
O
Other Shooting
Modes
Playback Mode
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
O
O
O
O
O
O
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
i-Contrast (= 54)
Auto
Off
O
–
O
–
O
O
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
–
–
O
O
–
–
O
O
O
O
O
O
O
O
O
O
Review image after shooting (= 38)
Off/Quick
Display Time
2 sec./4 sec./8 sec./Hold
Off
Display Info
Detailed
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Blink Detection (= 37)
On
Off
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
O
O
Grid Lines (= 36)
On/Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Flash Settings (= 35, 38)
Red-Eye Corr.
Red-Eye Lamp
On
Off
On/Off
–
–
Basic Guide
P
Advanced Guide
Auto Mode / Hybrid
Auto Mode
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
–
Index
IS Settings (= 63)
IS Mode
Dynamic IS
Off
Continuous
Shoot Only
1
2
O
–
O
–
O
O Available or set automatically. – Not available.
150
Before Use
Shooting Mode
Function
Date Stamp
4
G
I
P
t
N
(= 32)
Basic Guide
Advanced Guide
Off
Date/Date & Time
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
Camera Basics
Digest Type (= 27)
Include Stills/No Stills
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Other Shooting
Modes
O Available or set automatically. – Not available.
Auto Mode / Hybrid
Auto Mode
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
151
3 Set Up Tab Menu
Item
Before Use
1 Playback Tab Menu
Ref. Page
Item
Item
Ref. Page
Basic Guide
Ref. Page
Item
Ref. Page
Advanced Guide
Mute
= 114
File Numbering
= 118
List/Play Digest Movies
= 68
Cropping
= 81
Volume
= 114
Create Folder
= 118
Slideshow
= 71
Resize
= 80
Camera Basics
Hints & Tips
= 114
Units
= 118
Erase
= 76
My Colors
= 81
Date/Time
= 114
Video System
= 126
Protect
= 74
Transition
= 67
Auto Mode / Hybrid
Auto Mode
Time Zone
= 115
Ctrl via HDMI
= 124
Rotate
= 78
Scroll Display
= 67
Lens Retract
= 115
Wi-Fi Settings
= 85
Favorites
Group Images
= 70
Eco Mode
= 115
Mobile Device Connect
Button
= 79
= 107
Photobook Set-up
= 135
Auto Rotate
= 78
Certification Logo Display
= 119
i-Contrast
= 82
Resume
= 67
Red-Eye Correction
= 82
Power Saving
= 18, 116
LCD Brightness
= 116
Language
= 119
Start-up Image
= 116
Reset All
= 119
Format
= 117
Print
Ref. Page
–
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
2 Print Tab Menu
Item
Other Shooting
Modes
Item
Ref. Page
Select All Images
= 135
Select Images & Qty.
= 134
Clear All Selections
= 135
Select Range
= 134
Print Settings
= 133
Accessories
Appendix
Index
152
Handling Precautions
Playback Mode FUNC. Menu
Item
Ref. Page
Item
Ref. Page
Rotate
= 78
Play Movie
= 66
Protect
= 73
Play Linked Digest Movie
= 68
Favorites
= 79
Smart Shuffle
= 72
Erase
= 76
Image Search
= 69
Print
= 130
Slideshow
= 71
Group Playback
= 70
• The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Before Use
Basic Guide
Advanced Guide
• Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
Camera Basics
• If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Other Shooting
Modes
Auto Mode / Hybrid
Auto Mode
• Never use cleaners containing organic solvents to clean the camera or
screen.
P Mode
• Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
Playback Mode
• To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
• If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Before long-term battery storage, use up the battery pack’s remaining
charge, remove it from the camera, and store it in a plastic bag or similar
container. Storing a partially charged battery pack over extended periods
(about a year) may shorten its life or affect performance.
153
Specifications
Before Use
Wi-Fi
Standards
IEEE 802.11b/g/n*
*2.4 GHz band only
18x zoom: 4.5 (W) – 81.0 (T) mm
(35mm film equivalent: 25 (W) – 450 (T) mm)
Transmission Methods
OFDM modulation (IEEE 802.11g/n)
DSSS modulation (IEEE 802.11b)
LCD Monitor
3.0-type color TFT LCD
Effective Pixels: Approx. 461,000 dots
Communication Modes
Infrastructure mode*1, Ad hoc mode*2
*1 Supports Wi-Fi Protected Setup
*2 Wi-Fi Certified IBSS
File Format
Design rule for Camera File system, DPOF (version 1.1)
compliant
Supported Channels
1 – 11 (PC2071/PC2074) or 1 – 13 (PC2050)
Model numbers indicated in parentheses (= 160)
Data Type
Still Images: Exif 2.3 (JPEG)
Movies: MP4 (Video: MPEG-4 AVC/H.264; Audio: MPEG-4
AAC-LC (monaural))
Security
WEP, WPA-PSK (AES/TKIP),
WPA2-PSK (AES/TKIP)
Interface
Hi-speed USB
HDMI output
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Camera Effective Pixels
Approx. 16 million pixels
(Max.)
Lens Focal Length
Power Source
Battery Pack NB-6LH
AC Adapter Kit ACK-DC40
Dimensions (Based on
CIPA Guidelines)
103.8 x 61.0 x 26.0 mm (4.09 x 2.40 x 1.02 in.)
Weight (Based on CIPA
Guidelines)
Approx. 188 g (approx. 6.63 oz.; including the battery pack
and memory card)
Approx. 164 g (approx. 5.78 oz.; camera body only)
Digital Zoom Focal Length (35mm equivalent)
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
25 – 1800 mm
(Represents the combined focal length of optical and digital
zoom.)
Setting Menu
Digital Zoom [On]
Digital Tele-Converter
1.6x
40.0 – 720.0 mm
Appendix
Digital Tele-Converter
2.0x
50.0 – 900.0 mm
Index
Accessories
154
Before Use
Number of Shots/Recording Time, Playback Time
Number of Shots
Eco Mode On
Movie Recording Time*1
Continuous
Shooting*2
Playback Time
Approx. 290
Approx. 430
Number of 4:3 Shots per Memory Card
Recording Pixels
Approx. 1 hour
Approx. 1 hour, 30 minutes
Approx. 5 hours
*1Time under default camera settings, when normal operations are performed, such as
shooting, pausing, turning the camera on and off, and zooming.
*2Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
•The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
•Under some shooting conditions, the number of shots and recording time may be less
than mentioned above.
•Number of shots/time with a fully charged battery pack.
(Large)
16M/4608x3456
Compression
Ratio
Number of Shots per Memory Card
(Approx. shots)
Basic Guide
Advanced Guide
8 GB
32 GB
1058
4272
1705
6883
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
(Medium 1)
1996
8059
8M/3264x2448
3069
12391
(Medium 2)
4723
19064
3M/2048x1536
8469
34184
(Small)
27291
110150
0.3M/640x480
40937
165225
•The values in the table are based on Canon measurement conditions and may
change depending on the subject, memory card and camera settings.
•The values in the table are based on 4:3 aspect ratio. The number of shots available
varies by aspect ratio (= 34).
Camera Basics
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
155
Before Use
Recording Time per Memory Card
Shooting Range
Recording Time per Memory Card
Image Quality
8 GB
32 GB
34 min. 38 sec.
2 hr. 19 min. 58 sec.
2 hr. 00 min. 15 sec.
8 hr. 05 min. 48 sec.
4 hr. 15 min. 32 sec.
17 hr. 12 min. 20 sec.
•The values in the table are based on Canon measurement conditions and may
change depending on the subject, memory card and camera settings.
•Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 29 minutes and 59 seconds when shooting in
[ ] or [ ], or approximately 1 hour when shooting in [ ].
•Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Maximum Wide Angle
(j)
Maximum Telephoto
(i)
5 cm (2.0 in.) – infinity
1 m (3.3 ft.) – infinity
5 cm (2.0 in.) – infinity
1 m (3.3 ft.) – infinity
e*
5 – 50 cm
(2.0 in. – 1.6 ft.)
–
u*
3 m (9.8 ft.) – infinity
3 m (9.8 ft.) – infinity
Shooting Mode Focusing Range
–
Other modes
*Not available in some shooting modes.
Speed
Approx. 3.9 shots/sec.
Approx. 10.5 shots/sec.
Maximum wide angle (j)
50 cm – 3.5 m (1.6 – 11 ft.)
Maximum telephoto (i)
1.0 – 2.0 m (3.3 – 6.6 ft.)
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Shooting Mode
Flash Range
Advanced Guide
P Mode
Continuous Shooting Speed
G
Basic Guide
Wi-Fi Functions
Setting Menu
Accessories
Shutter Speed
[
] mode, automatically set range
Appendix
1 – 1/2000 sec.
Index
Aperture
f/number
f/3.8 / f/11 (W) – f/6.9 / f/20 (T)
156
Before Use
Battery Pack NB-6LH
Type:
Rechargeable lithium-ion battery
3.7 V DC
Nominal Voltage:
Nominal Capacity:
1060 mAh
Approx. 300 times
Charging Cycles:
Operating Temperatures:0 – 40 °C (32 – 104 °F)
Dimensions:
34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.)
Approx. 22 g (approx. 0.78 oz.)
Weight:
Battery Charger CB-2LY/CB-2LYE
Rated Input:100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.05 A (240 V)
Rated Output:
4.2 V DC, 0.7 A
Charging Time:
Approx. 2 hr. (when using NB-6LH)
Charge Indicator:Charging: orange / Fully charged: green
(two-indicator system)
Operating Temperatures:0 – 40 °C (32 – 104 °F)
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
157
Index
A
AC adapter kit............................. 122, 126
Accessories........................................ 122
AE lock................................................. 53
AF frames............................................. 58
AF lock................................................. 61
Aspect ratio.......................................... 34
AUTO mode (shooting mode)......... 14, 25
AV cable..................................... 122, 125
B
Batteries → Date/time (date/time battery)
Battery charger............................... 2, 122
Battery pack
Charging......................................... 10
Eco mode......................................115
Level............................................. 144
Power saving.................................. 18
Black and white images........................ 56
Blink detection...................................... 37
C
Camera
Reset all........................................119
Camera access point mode................ 100
CameraWindow (computer)......... 93, 127
CameraWindow (smartphone)............. 91
CANON iMAGE GATEWAY............ 86, 88
Center (AF frame mode)...................... 59
Clock.................................................... 23
Color (white balance)........................... 55
Compression ratio (image quality)........ 63
Connecting via an access point............ 95
Connecting without an access point... 100
Continuous shooting............................. 33
High-speed burst
(shooting mode)............................. 50
Creative filters (shooting mode)........... 42
Creative Shot (shooting mode)............. 43
Cropping....................................... 81, 131
Custom white balance.......................... 55
D
Date/time
Adding date stamps....................... 32
Changing........................................ 13
Date/time battery............................ 13
Settings.......................................... 12
World clock....................................115
DC coupler................................. 122, 126
Defaults → Reset all
Digital tele-converter............................ 57
Digital zoom.......................................... 30
Display language.................................. 13
DPOF.................................................. 133
Drive mode........................................... 33
E
Eco mode............................................115
Editing
Cropping......................................... 81
i-Contrast........................................ 82
My Colors....................................... 81
Red-eye correction......................... 82
Resizing images............................. 80
Editing or erasing connection
information........................................... 111
Erasing................................................. 76
Error messages.................................. 141
Exposure
AE lock........................................... 53
Compensation................................ 52
FE lock........................................... 62
Focus lock............................................ 59
FUNC. menu
Basic operations............................. 20
Table..................................... 147, 153
Basic Guide
G
Camera Basics
GPS information display....................... 67
Grid lines.............................................. 36
H
Playback Mode
High-speed burst (shooting mode)....... 50
Household power............................... 126
File numbering.....................................118
Fireworks (shooting mode)................... 42
Fish-eye effect (shooting mode)........... 44
Flash
Deactivating flash........................... 62
On.................................................. 61
Slow synchro.................................. 61
Focusing
AF frames....................................... 58
AF lock........................................... 61
AF-point zoom................................ 36
Servo AF........................................ 60
Focusing range
Infinity............................................. 57
Macro............................................. 57
Other Shooting
Modes
HDMI cable......................................... 123
Hybrid Auto (shooting mode)................ 27
FE lock................................................. 62
Auto Mode / Hybrid
Auto Mode
P Mode
F
Face self-timer (shooting mode)........... 48
Advanced Guide
Handheld nightscene
(shooting mode)................................... 41
Face AiAF (AF frame mode)................. 58
Favorites............................................... 79
Before Use
I
i-Contrast........................................ 54, 82
Image quality → Compression ratio
(image quality)
Images
Display period................................ 38
Erasing........................................... 76
Playback → Viewing
Protecting....................................... 73
Image stabilization................................ 63
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Image Sync................................ 107, 108
Indicator................................................ 22
Infinity (focusing range)........................ 57
ISO speed............................................ 54
158
L
Lamp.............................................. 37, 38
Long shutter (shooting mode).............. 49
Low light (shooting mode).................... 41
M
Macro (focusing range)........................ 57
Magnified display.................................. 71
Memory cards......................................... 2
Recording time............................. 156
Menu
Basic operations............................. 21
Table............................................. 146
Metering method.................................. 53
Miniature effect (shooting mode).......... 45
Monochrome (shooting mode)............. 46
Movies
Editing............................................ 83
Image quality
(resolution/frame rate).................... 35
Recording time............................. 156
My Colors....................................... 56, 81
P
Package contents................................... 2
Photobook set-up............................... 135
PictBridge................................... 123, 129
Playback → Viewing
Portrait (shooting mode)....................... 41
Poster effect (shooting mode).............. 42
Power................................................. 122
→ AC adapter kit
→ Battery pack
Power saving........................................ 18
Printing............................................... 129
Program AE.......................................... 52
Protecting............................................. 73
P (shooting mode)................................ 52
R
Red-eye correction......................... 35, 82
Remote shooting.................................110
Reset all..............................................119
Resizing images................................... 80
Resolution (image size)........................ 34
Rotating................................................ 78
S
Saving images to a computer..... 105, 128
Screen
Display language............................ 13
Icons..................................... 144, 145
Menu → FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Searching............................................. 69
Self-timer.............................................. 31
2-second self-timer......................... 31
Customizing the self-timer.............. 32
Face self-timer (shooting mode).... 48
Wink self-timer (shooting mode).... 47
Sending images.................................. 103
Sending images to a computer............. 87
Sending images to another camera..... 88
Sending images to a printer................. 87
Sending images to
a smartphone............................... 87, 106
Sending images to Web services......... 86
Sepia tone images................................ 56
Servo AF............................................... 60
Shooting
Shooting date/time → Date/time
Shooting information.................... 144
Slideshow............................................. 71
Smart Shuffle........................................ 72
Smart Shutter (shooting mode)............ 47
Smile (shooting mode)......................... 47
Snow (shooting mode)......................... 41
Software
Installation...................................... 93
Saving images to
a computer........................... 105, 128
Sounds................................................114
Strap................................................. 2, 10
Super vivid (shooting mode)................. 42
T
Terminal...................... 124, 125, 126, 129
Magnified display........................... 71
Single-image display................ 15, 66
Slideshow....................................... 71
Smart Shuffle................................. 72
TV display.................................... 123
W
White balance (color)........................... 55
Wi-Fi functions...................................... 85
Wi-Fi menu........................................... 94
Wink self-timer (shooting mode)........... 47
World clock..........................................115
Wrist strap → Strap
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Z
Zoom........................................ 14, 25, 30
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Toy camera effect (shooting mode)...... 46
Tracking AF.......................................... 58
Traveling with the camera...................115
Troubleshooting.................................. 138
TV display........................................... 123
V
Viewing........................................... 15, 66
Image search................................. 69
Index display.................................. 69
159
Wi-Fi (Wireless LAN) Precautions
• The camera’s model number is PC2071/
PC2074/PC2050 (including WLAN module
model WM223). To identify your model, check
the label on the bottom of the camera for a
number beginning with PC.
•
• Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certification labels from the product
• According to foreign exchange and foreign trade law regulations, export
permission (or service transaction permission) from the Japanese
government is necessary to export strategic resources or services
(including this product) outside Japan.
• Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported to
or brought into a country under U.S. trade embargo.
• When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and reset
the product to its default settings (erase settings) if necessary.
• Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this product
due to loss or theft of the product.
• Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function and product are used in ways other than
as described in this guide.
• Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
Radio Wave Interference Precautions
• This product may receive interference from other devices that emit radio
waves. To avoid interference, be sure to use this product as far away as
possible from such devices, or avoid using the devices at the same time
as this product.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be
erased due to incorrect operation of the product, the effects of radio
waves or static electricity, or accident or malfunction. Be sure to make
notes of wireless LAN settings as a precaution. Please note that Canon
accepts no responsibility for direct or indirect damages or loss of
earnings resulting from a degradation or disappearance of content.
160
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
• Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the
results on the screen. Networks you are not authorized to use (unknown
networks) may also be displayed. However, attempting to connect to or
using such networks could be regarded as unauthorized access. Be sure
to use only networks you are authorized to use, and do not attempt to
connect to other unknown networks.
If security settings have not been properly set, the following problems may
occur.
• Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
• Unauthorized network access
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard to
cover their tracks when infiltrating other systems).
Before Use
The camera can print to PictBridge-compatible printers
via Wi-Fi. PictBridge technical standards make it easy
to connect digital cameras, printers, and other devices
directly. Additionally, a new standard called DPS over IP
enables PictBridge connections in network environments,
and the camera is also compatible with this standard.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Battery Charger CB-2LY
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
161
Before Use
FCC/IC Notice
Model: PC2071 (including WLAN Module Model WM223, FCC ID: AZD223)
FCC Notice
(Digital Camera, Model PC2071 systems)
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
•
•
•
•
Accessories
Appendix
Index
162
Before Use
Disclaimer
Trademarks and Licensing
• Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
• Unauthorized reproduction of this guide is prohibited.
• All measurements based on Canon testing standards.
• Information subject to change without notice, as are product
specifications and appearance.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
Wi-Fi Functions
• App Store, iPhone, and iPad are trademarks of Apple Inc.
Setting Menu
• The SDXC logo is a trademark of SD-3C, LLC.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
Accessories
Appendix
Index
• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
• All other trademarks are the property of their respective owners.
• This device incorporates exFAT technology licensed from Microsoft.
• This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted
or implied for any other use for MPEG-4 standard.
163