Sea Gull Lighting 3405-07 Installation Guide

INSTALLATION AND SAFETY INSTRUCTIONS
ADDENDUM TO THE FIXTURE INSTRUCTION SHEET
A-765L
FOR CAP NUT LOCK UP FIXTURES
DUE TO RECENT CHANGES IN UL AND C-UL STANDARDS,
THIS FIXTURE NOW REQUIRES AN ADDITIONAL MOUNTING
SYSTEM CONSISTING OF A SAFETY CABLE.
WARNING: BE SURE OUTLET BOX IS SECURED TO THE
BUILDING STRUCTURE, SO IT IS ABLE TO SAFELY
SUPPORT THE WEIGHT OF THE FIXTURE.
1. On nipple, thread (in the following order) nut, large washer,
lock washer,and the end washer from safety cable. Secure
with nut.
2. Mount nipple to mounting bar.
3. Through the safety screw, insert washer and safety cable.
4. Secure safety screw (supplied) to the wood building structure.
If your building structure is made of other material (i.e. metal,
concrete, etc) select an appropriate method for your
application (not supplied).
5. Proceed with fixture instruction sheet supplied with your fixture.
FOR CENTER LOCK UP FIXTURES
SAFETY
CABLE
WASHER
SAFETY
SCREW
MOUNTING
BAR
NUT
FLAT
WASHER
NUT
NIPPLE
WASHER
SAFETY
CABLE
SAFETY
SCREW
NUT
LOCK
WASHER
CANOPY
MOUNTING
BAR
NUT
FLAT
WASHER
LOCK
WASHER
CAP
NUTS
FIGURE 2
NUT
NIPPLE
LOCK
WASHER
NUT
CANOPY
SCREW
COLLAR RING
SCREW
COLLAR
FIGURE 1
Installation And Safety
Instruction
A-765L 072704
Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.
Fill In Item Number On Carton And
File This Sheet For Fixture Reference.
ITEM#_______________