the great outdoors by Minka Lavery 8769-166 Installation Guide

INSTALLATION INSTRUCTIONS
For Model 8769
READ AND SAVE THESE INSTRUCTIONS
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old
fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts
on a clear area. Take care not to lose any small parts
necessary for installation.
3. Thread the 2 mounting screws (B) into the mounting plate
(C) spaced the same distance apart as the holes in the
fixture canopy (E). (You can adjust the length of the screws
if necessary.)
4. Attach the mounting plate (C) to the outlet box with
mounting screws (B) (Size: #8-32*0.78"L)
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig.2.Making sure
that all wire connectors are secured. If your outlet box has
a ground wire (green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s ground
wire directly to the circular strap using the green screw
provided.
COMPLETING THE INSTALLATION (Fig. 1)
6. Align the canopy (E) to the mounting plate (C) and secure
with the cap nuts (F)
7. Install the bulbs in accordance with the fixture’s
specifications. DO NOT EXCEED THE MAXIMUM
WATTAGE RATING! (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!)
8. Align the glass shade (G) to the center stem followed by
decorative cover (H) and secure with hex-nut (I) and finial
(J).
Your installation is now complete.
junction box and test the fixture.
Return power to the
Fig. 2
FIXTURE
WIRES
Black or
Smooth
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)