Hampton Bay AC421LKLED Instructions / Assembly

Item #1000 xxx xxx
Model #AC421LKLED
USE AND CARE GUIDE
XXXXX CEILING FAN LIGHT KIT
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light kit. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Table of Contents
Table of Contents ................................................................ 2
Pre-Installation .................................................................... 3
Safety Information ............................................................... 2
Installation............................................................................ 4
Warranty ............................................................................... 2
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
CAUTION: To reduce the risk of electrical shock, before
starting installation, disconnect the power by turning off
the circuit breaker or removing the fuse at the fuse box.
Turning the power off using the fan switch is not
sufficient.
CAUTION: To reduce the risk of electrical shock, this
light should be used only with the fan models listed
below:
Model: AC-552 (SKU# 172-503, 170-721, 171-348)
Manufactured by company: Air Cool Industrial Co, Ltd.
CAUTION: To avoid accidental burning, allow the bulb
and glass shade to cool completely before touching or
replacing the glass shade or bulbs.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
CAUTION: To reduce risk of electrical shock, do not
install this light kit in damp or wet locations. This light
kit is suitable for indoor use only.
WARNING: This device complies with part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
Warranty
The supplier warrants the light kit to be free from defects in workmanship and material present at time of shipment from the factory for two
years after the date of purchase by the original purchaser. The supplier also warrants that all other light kit parts, excluding any glass, to be free
from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the
original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product
is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the
product are your responsibility. Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not
covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting,
pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby
disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted
by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some
states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be
liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise
be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not
apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty
supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
2
Pre-Installation
TOOLS REQUIRED
Phillips
screwdriver
Electrical
tape
Wire
cutter
Step
ladder
PACKAGE CONTENTS
A
Part
B
Description
A
Quantity
1
Light kit assembly
Glass shade
B
1
HARDWARE INCLUDED
AA
Part
BB
CC
DD
EE
Description
FF
Quantity
AA
Switch housing mounting screw (preassembled in fan)
3
BB
Plastic plug (preassembled in fan)
1
CC
Nut (preassembled)
1
DD
Lock washer (preassembled)
1
EE
Glass cap (BN/ORB/WH) (preassembled)
3
FF
Decorative nut (BN/ORB/WH) (preassembled)
3
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Installing the Light Kit
1
2
Preparing the fan
□ Remove the switch housing cover (D) from the switch
housing (C) below the fan by removing the three switch
housing mounting screws (AA).
□ Remove the plastic plug (BB) from the switch housing
cover (D).
C
Preparing the light kit
□
Remove the nut (CC) and lockwasher (DD) from the light kit
stem and keep for later use.
□
Route the light kit wires (black and white) (GG) through the
hole of the switch housing cover (CC)
□
Screw the switch housing cover onto the light kit stem and
fasten by using the lock washer (DD) and nut (CC). Be sure it is
tight enough to prevent the light kit from vibrating loose.
CC
DD
AA
GG
D
A
D
BB
3
Attaching the light kit to
the switch housing
CAUTION: Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
□
While holding the LED light kit (A) under your fan motor
assembly, locate two single white and blue wires (HH) in the
switch housing labeled "FOR LIGHT". Make the polarized plug
connections:
- White to white
- Blue to black
AA
Carefully push all wires back into the switch housing. Install
the light kit LED (A) onto the switch housing with the three
switch housing mounting screws (AA) provided. Be sure to
tighten all screws.
HH
A
4
Assembly (continued)
4
Installing the glass shade
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Remove the decorative nut (FF) and glass cap (EE)
from the light kit (A).
□
Place the glass shade (B) over the light kit stem and
secure with the glass cap (EE) and decorative nut (FF)
previously removed. Do not overtighten.
□
Insert the two pull chains (II) through the eyelet in the
glass shade (B) and glass cap (EE).
□
Install two pull chains and fobs (JJ) (not included)
onto the pull chains located in the switch housing (C)
and light kit (A). Turn on the power and check the
operation of the light kit.
C
A
II
B
EE
FF
JJ
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Net weight 2.86 lbs (1.3 KG)