ASSEMBLY INSTRUCTIONS STYLE# 21959 Careful unpack all lamp parts from the carton. 1.Take the lamp carefully out of the Carton,and place it on a flat surface. 2.Be sure the power to the installation point is power off. 5.Install Marble Assembly and Metal Shade onto fitters by fastening Socket Collar onto threaded Socket. 4.Thread the Rods onto the Coupling until snug. 5.Place the Ceiling Canopy over the Mounting Screws and thread Mounting Balls onto the Mounting Screws to secure it , Hand tighten until snug. 6.Install bulbs (not included).See label located at socket area for type and maximum allowed wattage. IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug ( one blade is wider than the other ) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.