Aastra Voice 6090 Owner's User manual

List of Error-ID's out of Aastra Intelligate
1
2
3
4
ar
ar
ar
ar
Bridge received unexpected event, parameter is the EvenId
Ipc received message to unknown Domain, Parameter is SigNr.
Tried to remove unexisting entry from mapping table
Take Event received unexpected event, parameter event Id
5 ar
6 ar
7 ar
Could not find a subtype which matches the incoming event, parameter event_Id
Could not find an Instance for the called object, parameter object-Id
General armst error id.
8 ar
9 ar
10 ar
Unique value is too large. All have been allocated. See syscommon.h :
MaxUniqueValue (probably a not delete-ing error when values are finished with)
A trace point with invalid parameters was called.
Assert failed.
11 ar
12 ar
13 ar
14 ar
15
16
17
18
19
ar
ar
ar
ar
ar
20
21
22
23
24
25
26
27
28
ar
ar
ar
ar
ar
ar
ar
ar
ar
29
30
31
32
33
34
35
36
ar
ar
ar
ar
ar
ar
ar
ar
37
38
39
40
41
42
ar
ar
ar
ar
ar
ar
A file segment without a valid data block was detected. Shouldn't ever happen.
An unhandled signal was passed to the process framework. Parameter 1:
Signal Major and Minor (8 bit each), Parameter 2: Sender PID, Parameter 3:
Receiver PID, If all parameters are 0, this means that a NULL signal pointer
was received.
watchdog process error
Trying to restore an object with an id that does not exist in the handleIdpool
Unable to allocate memory from the boot heap. The reference and Id of the
object to be restored is deleted
Unable to restore the handle ID pool. Trying to create a new one
Entry is locked although it shouldn't, skip it
Integrity check: Handle Id is out of allowed range
Integrity check: Object reference doesn't point into heap
Integrity check: Too many errors during check. Can not deallocate all invalid IDs
Integrity check: Unknown state in recoveryList. Initialise to default
Could not create new handle ID for an object
Unable to allocate memory from heap with new
Unable to free entry in dataRecoveryList
Unable to get handle Id from reference. Can not deallocate handle Id
Fatal error: Could not deallocate memory with operator delete --> crash
Could not get reference from handle Id
Subtraction returned a value < 0. Absolute value is taken.
memory alloctead via _sbrk will never be freed. This does not mean that it
creates a real memory leak, it can be allocated again by the cadul alloc sys call.
But you will get serious problems useing _sbrk in dynamic processes, because
they crash if they ha
Tried to get size of a compressed application file with no valid header
CRC-check of compressed application file failed
Tried to check CRC of a compressed application file with no valid header
tried to start a timer without setting the expiry time
wrong parameter passed to arTimerC
Statemodel received can't happen event.
Event sent to wrong subtype.
This Warning is raised if an event of a Statemodel is sent to an non existing
instance. This can happen if the instance was deleted during the event was in the
queue.
CRC of idPool corrupted!
couldn't add the new handle to the DataRecoveryList!
could not allocate new id
could not deallocate id in pool
CRC of recoveryList corrupted!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
43
44
45
46
47
48
49
50
51
ar
ar
ar
ar
ar
ar
ar
ar
ar
52
53
54
55
56
57
ar
ar
ar
ar
ar
ar
58 ar
59 ar
60 ar
61 ar
62 ar
63 ar
2001 os
2002
2003
2004
2005
2006
2007
os
os
os
os
os
os
2008
2009
2010
2011
2012
os
os
os
os
os
2013 os
2014 os
2015 os
2016
2017
2018
2019
os
os
os
os
ID in idPool does not match ID in recoveryList
Number of allocated IDs different in idPool and recoveryList
Unknown TepId-Type used for facparam.setSubscRef()
no valid location to check for a compressed application file
reading header of compressed application file form flash failed
compressed application file exceeds the maximum allowed size
reading flash failed
The application tried to move the data pointer out of bounds.
Tried to free a call id that was not allocated.
Either the timer instance in the expiry signal was NULL or the signal at all was
invalid.
ArlibTimerC pointer duplicated.
ArLibTimerC pointer not found.
Unexpected signal
function arTypFacInfoGetLengthByCommand : command out of range
function arTypFacInfoGetLengthByCommand : length too long
Tried to free memory with arLibHeapFree() that was not allocated with
arLibHeapAlloc().
Overflow in tax multiplication. Param 1: Overflow value Param 2: Argument a
Param 3: Argument b
The instance pointer does not point to this timer anymore, maybe the memory
has been freed!
The conversion from TpTermIdC to ArTermIdC was not possible because the
size of the TpTermIdC exceeds the maximum size of ArTermIdC
Over-writer prevented. P1 = which function (memcpy, strcpy, strcat, etc.) P2 =
Destination buffer size P3 = Attempted write size
The canceled timer does not contain the correct expiry pointer.
1) a unknown Minor has been received by the process osL2iMBIProc 2)
parameter1 contains the received MajorMinor as UInt16.
the error id is used for severe errors in the process l2iPPILM with the use of
parameters as follows: UInt32 parameter0, UInt32 parameter1, UInt32
parameter2): 0:enum 'what error', 1: enum 'function', 2: erroneous value
The memory root pointer and its contents is not correct
The memory root pointer has been reentered during 'entryCheck'
The memory root pointer has been reentered during 'exitCheck'
The assumed block address is smaler than the memory root pointer
System reset while modifying free list of this memory root pointer
The memory root pointer and its contents is not correct for allocating a new
memory block
The address of buf is to small for to free in the memory
The assigned buf is not used or overwitten for to free in the memory
Either buf size or buf pointer wrong for to free in the memory
<osMemGetAllocated> is never called parameter first = TRUE
<osMemGetAllocated> is never called parameter first = TRUE or memory
modified while getting allocated
Unproper datablock found, or block too large
The memory root pointer and its contents is not correct for free a memory block
the error ID 2016 is used to monitor different errors indication weird
circumstances eg. unexpected identifiers and states and signals etc. use of
parameters is as follows: UInt32 parameter0: enum 'what error' UInt32
parameter1: enum 'function'
Error has been detected in the OS timeout server
The same OSE process name is already in the OSE process name list
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
2020
2021
2022
2023
2024
2025
os
os
os
os
os
os
2026 os
2027 os
2028 os
2029
2030
2031
2032
2033
2034
2035
2036
os
os
os
os
os
os
os
os
2037 os
2038 os
2039 os
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
os
os
os
os
os
os
os
os
os
os
os
os
2052 os
2053 os
2054 os
2055 os
2056 os
2057 os
2058
2059
2060
2061
2062
os
os
os
os
os
No more free place in the process name list. Check whether a) OseMaxProcs is
sufficient, b) killed OSE processes deleted their entries
the searched process is not found
Invalid access to process-list
Message is not sent by linkhandler
No relating process-index found
processname too long param0 = namelength param1 = max namelength
I haven't found a free place param0 = number of items in the list param1 = max
number of items in the list
entity is already empty param0 = process-entity index
There is already a signal -> free it
I have not found a free place in the relation list param0 = number of items in the
list param1 = max number of items in the list
entity is already empty
try to access the p-channel on a single-board system
Current process is not in the list
process not found on this board
new index for the same process param0 = old index param1 = new index
I haven't found the requested procId anymore
no signal found to send back to client
calling/called process is not known param0 = sender process index param1 =
receiver process index
message is too long param0 = size of the message param1 = max size of the
message
entry is not found on my side param0 = sender process index param1 = receiver
process index param2 = board id of the sender-board
a wrong bi was assumed param0 = assumed board identifier param1 = assigned
board identifier
Wrong P-Channel Minor received param0 = received minor
unexpected minor param0 = received minor
Wrong P-Channel Major received param0 = received major
Wrong Minor received param0 = received minor
Wrong Major received param0 = received major
tmo_struct.sig == NULL
*tmo_struct.sig != tmo_struct.sig_no
tmo_struct.sig not in pool
osConveyMsgToPort: invalid portref
Somebody wrote into this buffer while it was in the OS free list
Somebody wrote into this buffer while it was in the OS free list
Somebody wrote into this buffer's not used area while it was in the OS in use list
func oseGetFreeBufs: freelist contains odd next-ptr; show sender part in p1, p2
and p3
func oseGetFreeBufs: freelist contains odd next-ptr; show addressee part in p1,
p2 and p3
func oseGetFreeBufs: freelist contains odd next-ptr; save sigSize, SigNo and 8
bytes of content of buggy signal
Error Mapping OsbxMenuEnuC to MaTbxMenuEnuC - undefined value
pron blem with semaphore: the region is already unprotected
CPM error vector 0x00 called: The CPM requested an interrupt that the user
masked before the core serviced it and no other interrupts for the CPM are
pending.
no spare entry to record new task name
could not find pcb of pid
timestamp of process- or interrupt-swap have identical values
size of requested buffer is larger than OseMaxBufSize
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
2066 os
In osLibRestoreToProc() when a signal is not owned by the process trying to
change ownership we generate this error, of severity crash, to capture the proc
ids. Initially created because of br 17393.
The biggest block make a mem leak, to find who is allocating them , we make an
error log
Corrupted signal header or signal administration block P1 = buffer ptr, P2 = ptr
to MMS header, P3 = ptr to admin header
Inconsistency in buffer pool. The pool appears to be corrupted. P1 = ptr to admin
block, P2 = Magic number, P3 = 0
2067 os
The given SysDateTimeRec is not valid, so the oseRtcSettime is not done.
2063 os
2064 os
2065 os
2068 os
2069 os
2070 os
2071 os
2072 os
2073 os
2074 os
2075 os
2076 os
2077 os
2078 os
2079 os
2080 os
2081 os
2082 os
2083 os
2084 os
2085 os
2086 os
2087 os
a buffer header has been overwritten. search for previous buffer has completed.
find in stack dump of the crashlog information of the previous buffer which is
probably the one which has overwritten data of the next buffer header.
unknown major signal received
std::terminate() was called.
A function to set date/time was called from an interrupt process. This is not
allowed. date/time was not set. Parameter 1 shows the process-Id of the calling
process.
Link handler hasn't been started because database access failed.
It was tried to mount the filesystem with parameter "validate" but this failed. In
this case the filesystem is in readonly mode which is catastrophic. The filesystem
was unmounted and mounted again without parameter "validate". "validate" does
some kind of
huntProc() failed - hunt signal was not returned in time.
Tried to free memory with arLibHeapFree() that was not allocated with
arLibHeapAlloc().
Tried to free memory with osOseHeapFree() that was not allocated with
osOseHeapAlloc().
Tried to reallocate memory with osOseHeapRealloc() that was not allocated with
osOseHeapAlloc().
You can't allocated heap memory yet as the heap isn't initialised. Please come
back later, or use signal pool memory instead.
Called osLibHeapMakeBufMaxSize() on a buffer that was not from the heap
NULL pointer problem in osLibGetUserAllocSize(). Either the passed pointer is
NULL or the header pointer is NULL. Check the parameters for more details.
Initialisation of the program handler (PRH) for loading modules failed due to the
following reason: 1 = initialisation of MMS failed, 2 = initialisation of file archive
server (ASF) failed, 3 = connection of AFS to PLS failed, 4 = Initialisation of List
fo
Unable to allow access to heap extension. The system will crash wit an MMS
error in case memory in the heap extension will be accessed
Loadmodule could not be loaded. Parameter 1 = status, Parameter 2 & 3 = first
part of name of loadmodule
Loadmodule could not be started. Parameter 1 = status, Parameter 2 & 3 = first
part of name of loadmodule
The directory where loadmodules are stored (/loadmodule per default) does not
exist
The RELEASE or TARGET information of the link unit does not match the
RELEASE or TARGET of the main unit. Parameter 1 contains the name of the
link unit, Parameter 2 if its a ROM or MON build. Parameter 2 is 1 for ROM
no valid entry "OSE_LM_RELEASE=" found in elf-header of loadmodule (defined
in <xy>loadmodule.def)
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
2088 os
2089 os
2090 os
2091 os
2092 os
2093 os
2094 os
2095 os
2096 os
2097 os
2098 os
2099 os
2100 os
2101
2102
2103
2104
os
os
os
os
2105 os
2106 os
2107 os
2108
4006
4007
4008
4009
4010
4011
4012
4013
4014
os
sm
sm
sm
sm
sm
sm
sm
sm
sm
4015 sm
no valid entry "OSE_LM_TARGET=" found in elf-header of loadmodule (defined
in <xy>loadmodule.def)
no valid entry "OSE_ELF_MAIN_START=" found in elf-header of loadmodule
(defined in <xy>loadmodule.def)
no valid entry "OSE_ELF_FILE_OFFSET=" found in elf-header of loadmodule
(defined in <xy>loadmodule.def)
no valid entry "OSE_LM_MAIN_NAME=" found in elf-header of loadmodule
(defined in <xy>loadmodule.def)
The loaded link unit does not match the BOARD identifyer of the PBX. Parameter
1 contains BOARD identifyer of link unit
no valid entry "OSE_LM_BOARD=" found in elf-header of loadmodule (defined in
<xy>loadmodule.def)
Internal TOSV table contains duff expiry signal pointer after timer started.
Free size different from requested size
An non-fatal ose error has occured which allows the application to continue
without crashing. To exactly know what happened, this errorReport indicates the
reason of the ose error. Parameter 1 = userCalled, Parameter 2 = errorCode,
Parameter 3 = moreInfo
Process calling osOseHeapFree() does not own the memory. P1=Calling
Process P2=Owner P3=Pointer to memory
The limit for logging created/extended pools prior the MEL (memory extension
logger)is fully working is exceeded! Param1 = exceeded limit. Adapt
MaxPoolsPriorHeapStart if required
could not create directory to store the perfmeter files p1: errno p2: 1 /home/logs could not be created
2 - /home/logs/perf could not be created
p3: 0
could not create directory to store the pbx load dump files p1: errno p2: 1 /home/logs could not be created
2 - /home/logs/load could not be created
p3: 0
could not create directory to store the memory log files p1: errno p2:
1:/home/logs
could not be created
2:/home/logs/memory could not be
created p3: 0
For platform exist no RTC handling (see code). You have to implement one.
The request send to the memory manager wasn't successful
The run_shell_cmd to dump the heap per process wasn't successful
Could not create /home/data directory to store timezone configuration file
localtime.txt. The timezone configuration will not work without this configuration
file. p1: errno
The TFTP server has reached its configured SW limits. Check if the SW limits
needs adaptations.
Information from a non existing memory pool was requested. Parameter 1 =
number of existing pools, Parameter 2 = number of requested pool
The configured timezone file is not valid/corrupt. Replace the file in filesystem
("/home/zoneinfo/..."). The original filename was renamed to filename_invalid.
String has been cut in length for monitor-output
too long string
too long string
too long string
Unknown signal minor.
Unknown signal Major
Unknown signal Minor in process smSysWdogProc
Unknown Major received in watchdog process
Suspend time for watchdog supervision to long
The watchdog datastructure is not able to support a further process supervision
==> enhance the constant MaxSupervisedProcesses by 1
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4016
4017
4018
4019
4020
4021
4022
4023
4024
4025
4026
4027
4028
4029
4030
4031
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4032
4033
4034
4035
4036
4037
4038
4039
4040
sm
sm
sm
sm
sm
sm
sm
sm
sm
4041
4042
4043
4044
4045
4046
4049
4052
sm
sm
sm
sm
sm
sm
sm
sm
A watchdog supervised process did not answer - p1, p2: first 8 chars (in hex) of
process name, p3: process priority (in hex).
A process trys multiple times to suspend the watchdog supervision
A watchdog reestablish received of an unknown process
A watchdog suspend timeout received of an unknown process
Old Office stile error message received
Unexpected control content of Minor ModMncInfoInd
Unknown signal Minor of MajorMod in system main process
Unknown signal timeout Minor in system main process
Unknown Major received in system main process
Function smTstTest is called with a wrong runstate
Unknown Minor received in smTbxProc for MajorTbx
Unknown Minor received in smTbxProc for MajorService
Unknown Minor received in smTbxProc for MajorMod
Unknown Major received in smTbxProc
testfunction smTstTest is called with state out of enum RunstateType
Attempt to initiate the watchdog SW process supervision a second time
Attempt to initiate a second time the Ose priority level of the SW watchdog
process supervision
TBX Menu title not contained in variable tbxMainMenu
4053 sm
4056 sm
4057 sm
Unknown signal Minor in system error process
Unknown signal Minor of MajorEset in system main process
SRAM-PCMCIA for KDM-variables is not plugged in
100% PCMCIA-SRAM test failed after firststart
in process unknown major received.
unexpected minor
The messages 'set maintenance', 'set out of order', and 'set urgent out of order'
are not allowed until the card is running normally (ie only CPU LED blinking after
'set in service' or 'set restricted service' have been eived
Invalid message received in information element Change Status
The message length of StatusAck is to long
TvaId is not valid or not supported
untreated minor received in main .
mt0 message received with illegal sapi or PD
Alarm: PCB Missing / Faulty
Alarm: CDA > Printer blocked
Alarm: Malfunction generate alarm if too many messages in 1 hour p1:
errorID p2: SWErrId p3: not used
First start due to other country SW plugged on as before
Only 1 DECT Master and one DECT slave board allowed in i4Cl project.
4058
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
4071
4072
The DectIf does not exist at the hardware level. Mo specific harcan be DECT.
Alarm: High number of alarms
Loc alarm dest not avail
Rem alarm dest not avail
Selftest-Error: 020 --> +48V Speisungsfehler
Selftest-Error: 021 --> -40V Speisungsfehler
Selftest-Error: 022 --> -5V Speisungsfehler
Selftest-Error: 100 --> EPIC reagiert nicht
Selftest-Error: 101 --> MUSAC antwortet nicht
Selftest-Error: 102 --> ZFK reagiert nicht
Selftest-Error: 103 --> SSA reagiert nicht
Selftest-Error: 104 --> B-Kanal-Mux funktioniert nicht
Selftest-Error: 105 --> RESA reagiert nicht
Selftest-Error: 106 --> Uhr ist nicht einstellbar
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4088 sm
4089
4090
4091
4092
4093
4094
4095
4096
4097
4098
4099
4100
4101
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4102
4103
4104
4105
4106
4107
4108
sm
sm
sm
sm
sm
sm
sm
4109 sm
4110
4111
4112
4113
sm
sm
sm
sm
4114 sm
4115 sm
4116 sm
4117 sm
Selftest-Error: 107 --> Uhr laeuft nicht
Selftest-Error: 200 --> PC-Card 1 schreibgeschuetzt
Selftest-Error: 201 --> PC-Card 2 schreibgeschuetzt
Selftest-Error: 202 --> PC-Card 1 beschaedigt
Selftest-Error: 203 --> PC-Card 2 beschaedigt
Selftest-Error: 204 --> PC-Card 1 reagiert nicht
Selftest-Error: 205 --> PC-Card 2 reagiert nicht
Selftest-Error: 206 --> PC-Card waehrend Kopieren entfernt
Selftest-Error: 207 --> falsche PC-Card in 1
Selftest-Error: 208 --> falsche PC-Card in 2
Selftest-Error: 209 --> ungueltige Daten auf PC-Card
Selftest-Error: 210 --> Upload von PC-Card misslungen
Selftest-Error: 211 --> Kopie zu PC-Card misslungen
Selftest-Error: 212 --> Batterie PC-Card 1 entladen
Selftest-Error: 213 --> Batterie PC-Card 2 entladen
Selftest-Error: The application (running in RAM) checksum failed. P1: 0 P2: 0
P3: 0
Selftest-Error: The boot-flash checksum failed, Parameter1=mem.begin,
Parameter2=mem.end
Selftest-Error: 502 --> Reserve
Selftest-Error: 503 --> Reserve
Selftest-Error: 504 --> Programmfehler nach Aufstarten
Selftest-Error: 505 --> DRAM SIMM fehlerhaft
Selftest-Error: 506 --> RPE antwortet nicht
Selftest-Error: 507 --> Interruptsystem defekt
Selftest-Error: 508 --> SIM60 antwortet nicht
Selftest-Error: 509 --> CPM antwortet nicht
Selftest-Error: 401 --> KDM-Backup failed
Selftest-Error: 511 --> Reserve
Selftest-Error: 512 --> Reserve
Selftest-Error: 513 --> Reserve
UNKNOWN REQUEST was passed to function smErrHandleSelfTestRequests
NO MAPPING (errorid --> user-doc errorid) available for the given errorid
Unexpected alarm spooler event
Illegal alarm spooler state
Illegal alarm spooler event
Illegal alarm spooler destination
Corrupt alarm spooler list
First start due to BCS8 SW does not meet PLATFORM_BCS8V2 MUP HW
coding
First start due to BCS4 SW does not meet PLATFORM_BCS8V2 MUP HW
coding
Alarm: Power loss
Synch loss on trunk alarm
It was not possible to suspend the l3iMt1Proc from the watchdog.
It was not possible to reestablish the normal watchdog supervision of the
l3iMt1Proc.
Alarm: Too many exchange lines
/* too much interrupt processes swapped in
*/
/* increase
PerfmeterIdStackSize else you'll get */
/* error informations
*/
/* a normal process has swapped in :
*/
/* there is still a
interrupt process running or
*/
/* int-process has not called
<errTraceIntEndProc> */
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128
4129
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4130 sm
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
/* too much interrupt processes swapped out
*/
/* check calls of
errTraceProc with NULL as param */
PSA switched off
PSA switched off
unexpected MajorDlSkt signal received
Unknown error ID error ID not associated to an alarm
The spooler language is not defined or unknown.
Cannot set default language for this country.
corrupt indexes in the ibustrace recording or dumping
Alarm: subscriber numbers missing
corrupt pointers in the ibustrace recording or dumping
tbstr has overwritten the following variable (see br5198 and others)
not supervised prozess tries to suspend from supervision
A watchdog suspend timeout expired of a previous suspended */
/* process,
but the process did not reestablish
the process will be back under supervision
p1+p2 = name p3=prio
It was not possible to establish a P-Channel connection using the OSE
linkhandler functionality. Therefore the alarm could not be forwarded to the
central board (zee). Probably the zee went just down or our linkhandler software
has a bug (!).
mistake - not a valid error
Error message for test purpouses
Just for testing
Selftest-Error: 21 --> uC fehlerhaft
Selftest-Error: 22 --> Dsp reagiert nicht
Selftest-Error: 23 --> HDLC reagiert nicht
Selftest-Error: 24 --> RESA reagiert nicht
Selftest-Error: 25 --> RTC reagiert nicht
Selftest-Error: 26 --> Interruptsystem defekt
Selftest-Error: 31 --> Genereller DRAMfehler
Selftest-Error: 32 --> DRAM Bank 1 fehlerhaft
Selftest-Error: 33 --> DRAM Bank 2 fehlerhaft
Selftest-Error: 34 --> DRAM Bank 3 fehlerhaft
Selftest-Error: 35 --> DRAM Bank 4 fehlerhaft
Selftest-Error: 41 --> Keine Applikation vorhanden
Selftest-Error: 42 --> Checksumme Bootsoftware fehlerhaft
Selftest-Error: 43 --> Checksumme Applikation fehlerhaft
Selftest-Error: 44 --> Keine Lizenz vorhanden
Selftest-Error: 45 --> Software-Versione-Transfer fehlerhaft
Selftest-Error: 51 --> Port 0.1 fehlerhaft
Selftest-Error: 52 --> Port 0.2 fehlerhaft
Selftest-Error: 53 --> Port 0.3 fehlerhaft
Selftest-Error: 54 --> Port 0.4 fehlerhaft
Selftest-Error: 55 --> Port 0.5 fehlerhaft
Selftest-Error: 56 --> Port 0.6 fehlerhaft
Selftest-Error: 61 --> Port 1.1 fehlerhaft
Selftest-Error: 62 --> Port 1.2 fehlerhaft
Selftest-Error: 63 --> Port 1.3 fehlerhaft
Selftest-Error: 64 --> Port 1.4 fehlerhaft
Selftest-Error: 65 --> Port 2.1 fehlerhaft
Selftest-Error: 66 --> Port 2.2 fehlerhaft
Selftest-Error: 67 --> Port 2.3 fehlerhaft
Selftest-Error: 68 --> Port 2.4 fehlerhaft
Selftest-Error: 71 --> Falsches Modul in Oapmslot
Selftest-Error: 72 --> Falsches Modul in linkem Erweiterungsslot
Selftest-Error: 73 --> Falsches Modul in rechtem Erweiterungsslot
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4168 sm
4169 sm
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
4190
4191
4192
4193
4194
4195
4196
4197
4198
4199
4200
4201
4202
4203
4204
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4205
4206
4207
4208
4209
4210
4211
4212
4213
4214
4215
4216
4217
4218
4219
4220
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
Selftest-Error: 74 --> Unbekanntes oder defektes Modul in Oapmslot
Selftest-Error: 75 --> Unbekanntes oder defektes Modul in linkem
Erweiterungsslot
Selftest-Error: 76 --> Unbekanntes oder defektes Modul in rechtem
Erweiterungsslot
Dect license couldn't be set because the hunt on p-channel hadn't worked.
unknown signal Minor of MajorMod received in smSynSynchProc
unknown signal Minor of MajorSysMgr received in smSynSynchProc
unknown signal Minor of MajorModTmo received in smSynSynchProc
unknown signal Major received in smSynSynchProc
unexpected update license command received
Error Mapping SmTbxMenuEnuC to MaTbxMenuEnuC - undefined value
error mapping SmSysAuxStateArtEnuC to MaSysAuxStateArtEnuC
error mapping MaSysAuxStateArtEnuC to SmSysAuxStateArtEnuC
cannot map smMonTestFlagEnuC to XaMonTestFlagEnuC
Attempt to access SM configuration data before startup complete
Singleton platform object does not exist
Singleton platform object does not exist
Singleton platform object does not exist
Singleton platform object does not exist
Unable to create circuit board spec.
Unable to create singleton platform object.
Circuit board without spec
getAvailability() called on non-module
remove() called on non-module
restore() called on non-module
setInService() called on non-module
setOutOfServiceAlarmed() called on non-module
physical port with invalid location id
physical module with invalid location id
configured circuit board with invalid location id
configured module with invalid location id
configured module with invalid location id
configured module with invalid location id
Singleton platform object does not exist
Physical module with no circuit board spec
Physical module with no circuit board spec
Physical module with no circuit board spec
Physical module with no circuit board spec
Physical module with no circuit board spec - param1: circuit board type, param2:
nodeId, param3: slotId
Physical module with no circuit board spec
Main board with no circuit board spec
Configured module with no circuit board spec
Configured module with no circuit board spec
Configured circuit board with no circuit board spec
Configured module with no circuit board spec
Configured module with no circuit board spec
Configured module with no circuit board spec
Physical module missing at location
configured port with invalid port sub-type
configured port with invalid port sub-type
port sub-type with invalid port type
port sub-type with invalid port type
port sub-type with invalid port type
port sub-type with invalid port type
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4221
4222
4223
4224
4225
4226
4227
4228
4229
4230
4231
4232
4233
4234
4235
4236
4237
4238
4239
4240
4241
4242
4243
4244
4245
4246
4247
4248
4249
4250
4251
4252
4253
4254
4255
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
4274
4275
4276
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
port sub-type with invalid port type
port sub-type with invalid port type
port sub-type with invalid port type
port sub-type with invalid port type
configured port with no link to configured circuit board
configured port with no link to configured circuit board
configured port with no link to configured circuit board
physical port with invalid port interface type
physical port with invalid port interface type
physical port with invalid port interface type
physical port with invalid port interface type
port interface spec with invalid port sub-type
port interface spec with invalid port sub-type
port interface spec with invalid port sub-type
port interface spec with invalid port sub-type
circuit board spec with no circuit board info
circuit board spec with no circuit board info
port type spec with no port type info
port type spec with no port type info
port sub-type spec with no port sub-type info
port sub-type spec with no port sub-type info
configured circuit board with invalid location id
configured circuit board not created at location
platform has not been created
platform has not been created
platform has not been created
platform has not been created
platform has not been created
platform has not been created
unable to find configured circuit board
T0TrunkInterface specification has not been created
SBusExtension specification has not been created
port type spec not created
attempt to decrement circuit board type count below zero
attempt to decrement port sub-type count below zero
attempt to decrement port type count below zero
invalid BasicS port reconfiguration
invalid BasicT port reconfiguration
invalid PrimaryS2 port reconfiguration
invalid PrimaryT2 port reconfiguration
invalid port reconfiguration
attempting to create default config for a non-existent port
attempting to create default config for port with undefined interface
unable to create broadcast configured port
unable to find broadcast port interface spec
platform has not been created
platform has not been created
unable to create location
unable to create location
unable to create configured main board
unable to create configured virtual module
unable to create configured main board's software
unable to create physical module
unable to create physical port
unable to create port interface spec
unable to create port sub-type spec
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4277
4278
4279
4280
4281
4282
4283
4284
4285
4286
4287
4288
4289
4290
4291
4292
4293
4294
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4295
4296
4297
4298
4299
4300
sm
sm
sm
sm
sm
sm
4301 sm
4302
4303
4304
4305
4306
4307
4308
4309
4310
4311
4312
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
sm
4313
4314
4315
4316
4317
4318
4319
4320
4321
sm
sm
sm
sm
sm
sm
sm
sm
sm
unable to create port type spec
configured circuit board not brought into service
configured port not brought into service
configured port with no link to configured circuit board
platform is not suitable for small base plate
platform is not suitable for large base plate
base plate type not known
Main board with no circuit board spec
Configured module with no circuit board spec
Physical module with no circuit board spec
platform has not been created
physical module with invalid location id
configured module missing at location
Configured module with no circuit board spec
Physical module with no circuit board spec
unsupported HdAllModuleTypeEnum
An unsupported message was received.
Unknown signal minor of MajorConfChange received in smSysProc_
Alarm: Module has reset This alarm is generated when the smSmsSrvProc
process receives a "Module Has Reset" message from a module.
licence chip does not contain a valid feature block
Unable to create sm object "ModuleFamilySpec"
Error in time/date conversion
This SmCircuitBoardType doesn't exist.
serial flash device not found or initialization failed.
function give_trunk_group called with incompatible params UInt8 absPort
(param1) and PortArt p_sort (param2).
MainBoard port order isn't compatible any more! That means you get problem
with AIMS and version transfer.
Error inserting an element in a container (map) for satellite.
Couldn't create a Location of an outside module.
Couldn't create a PhysicalModule of an outside module.
Couldn't create a PhysicalPort of an outside module.
Couldn't find ConfiguredCircuitBoard of an outside module.
no isdn interface found to send the request to..
Only the local node is allowed to set synchro switches on the isdn trunk
Lost connection to master
Lost connection to a satellite
Recovered connection to a satellite
4322 sm
Unable to destroy a satellite location because there is still linked a physical port
or physical module.==> The module type (board type) changed on that slot!
given portReference is not allowed to be a sync master
the selected portRef is not a valid synch reference
not a valid parameter for synchref has been passed
tried to set a synch reference which is not on local node
linkhandler failed to send to other nodes smSysSynchProc
Lost connection to a IP-Phone
unexpected state for slip-interrupts
unexpected state for timeouts
Synch alarm new error id (previously:24006) as the alarm is generated in SM not
in MA
4323 sm
in func smCfgGetRingPatterns() Reaching this branch of the code indicates a
serious database problem! Temporarily we read the country info from the
license chip information to return at least some sensible ring patterns.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4324 sm
4325 sm
4326
4327
4328
4329
4330
4331
4332
4333
sm
sm
sm
sm
sm
sm
sm
sm
4334 sm
4335 sm
4336 sm
4337 sm
4338 sm
4339 sm
4340 sm
4341 sm
4342 sm
4343 sm
4344 sm
4345
4346
4347
4348
sm
sm
sm
sm
4349 sm
4350 sm
4351 sm
4352 sm
4353
4354
4355
4356
sm
sm
sm
sm
4357 sm
4358 sm
4359 sm
requested portref is not ISDN
SmNwkPublicInterfaceC::getLocalIpAddresses() was called before a valid IP
address was available for the mainboard ethernet port.
SmNwkPublicInterfaceC::getLocalIpAddress() was called before a valid IP
address was available for the mainboard ethernet port.
could not get QoS Settings from IS-Domain
link handler send failed while sending QoS Signal to active node
storing module revision string with wrong locationId or string too long
hardware driver signal contains wrong driver information
failed to send RTC time adjust to node
Software information object not found.
This signal is not allowed fot other systems than satellite
Unable to update SmAIP6500Status. Parameter 1: Node ID Parameter 2: Slot
ID Parameter 3: Board ID
Unable to find/create SmAIP6500Status object. Parameter 1: Node ID
Parameter 2: Slot ID Parameter 3: Board ID
Unable to send InService message for AIP6500 to master.
No configured circuit board found at location. Parameter 1: NodeId Parameter
2: SlotId
Try to remove this port ref but it isn't available in the NodeId map table.
This port ref is already available in the NodeId map table.
This alarm is the counterpart of Alarm 4322. 4322 is generated when total
synchronisation is lost of any digital trunk line in the system which are member of
the synchronisation pool table.
This ErrorId is the counterpart of Alarm 4112. Alarm 4112 is generated when a
digital synch line looses its synchronisation (layer1 down). As soon as the line is
available again this new Alarm 4341 is generated.
An attempt to set the EIM swGeneration from ArVntSwGenerationUnknown to
that of the current application was unsuccessful
Failed to create a default IP address block on the licence chip
The DHCP client was unable to obtain an IP address following a first-start - the
DHCP client will be disabled and the mainboard ethernet port configured with the
default IP addresses
The DHCP client was either unable to obtain an IP address or could not retain an
existing leased IP address - after a short delay (to avoid overloading the LAN),
the DHCP client will be requested to perform a retry.
No response from the DHCP client during startup
IsEthInetReady signal was not received
Failed to create a feature block on the licence chip
SmNwkPublicInterfaceC::getIpAddress(nodeId) was called for a node which is
not currently active
Unable to start link handler because local IP address is not valid (either
ArIpAddressC::Undef or the default value)
tracing errorId: node settings have changed in smcfgnode.cc
Date (year, month ,day) is not valid!
in method handleMajorTgTiSignal() a unkown signal was received, see
parameters for details about major and minor
Unable to create virtual module for smCircuitBoardType::IP_VirtualModule.
Database transaction failed
Database transaction failed
SmNwkPublicInterfaceC::getMacAddress(nodeId) was called for a node which is
not currently active.
Unexpected event (param1) received in current state (param2) of
SmNwkSelfReg state machine.
Unexpected event (param1) received in current state (param2) of
SmNwkNodeReg state machine.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4387 sm
4388 sm
Unable to send AnnounceRej signal to rejected satellite. - param1 is the reject
cause (0: wrongSwVersion, 1: noAinLicence) - param2 contains equipmentId[1219] - param3 contains equipmentId[20-27]
Unable to send CtrlAip6500ConfUpdate signal to AIP at nodeId (param1), slotId
(param2). It might be that the Satellite (param1: nodeId) is not available, e.g.
offline.
Unable to send CtrlAip6500EthPortStateInd from AIP at nodeId (param1), slotId
(param2) to master
Unable to send CtrlAip6500RestartInd from AIP at nodeId (param1), slotId
(param2) to master
CtrlAip6500RestartInd received from unknown AIP at nodeId (param1), slotId
(param2).
send() failed when trying to get SW version of VM module.
Short reply from module when requesting SW version info
NULL address pointer!
A satellite announceReq has been rejected. - param1 is the reject cause (0:
wrongSwVersion, 1: noAinLicence) - param2 contains equipmentId[12-19] param3 contains equipmentId[20-27]
Attempt to send PortConfigSigS to satellite failed. - param1: locationId param2: nodeId - param3: slotId
No reply to SW version request
Open failed
An attempt to upgrade the EIM swGeneration to that of the current application
was unsuccessful
circuit board spec with no module family info
The resource count for DSP device (nodeId, slotId, dspId) is zero
VoIP/FoIP channels available but no corresponding DSP board
Active alarm 'Temporary Offline Satellite Licences Expired' (see cr32851)
PortStatus signal received from a satellite with no corresponding
SmNwkNodeRegContextC instance
PortConfigConfirm signal received from a satellite with no corresponding
SmNwkNodeRegContextC instance
InService signal received from a satellite with no corresponding
SmNwkNodeRegContextC instance
Unexpected minor for signal MajorSmNwkServices - param 1 is minor, param 2
is sender processId
Unexpected minor for signal MajorFm - param 1 is minor, param 2 is sender
processId
No physical module instance found at location. Parameter 1: NodeId Parameter
2: SlotId
Failed to set SmPhysicalModule.SwVersion for voicemail module. param1 :
locationId of voicemail module
smCfgReceiveSatStatus() failed - param1: nodeId, param2: slotId, param3:
boardType.
smCfgReceiveSatConfig() failed - param1: nodeId, param2: slotId, param3:
boardType.
smCfgReceiveSatConfigConfirm() failed - param1: nodeId, param2: slotId,
param3: boardType.
PortStatus signal sent by satellite contained an invalid board type - param1:
nodeId, param2: slotId, param3: boardType.
Failed to send AnnounceAck signal to satellite - param1: nodeId.
4389 sm
4390 sm
Failed to receive a PortConfig signal for each board during satellite registration param1: nodeId, param2: board count, param3: received signal count.
Timeout waiting for reply to SynchStatusReq - param1: satellite nodeId
4360 sm
4361 sm
4362 sm
4363 sm
4364
4365
4366
4367
sm
sm
sm
sm
4368 sm
4369 sm
4370 sm
4371 sm
4372
4373
4374
4375
4376
sm
sm
sm
sm
sm
4377 sm
4378 sm
4379 sm
4380 sm
4381 sm
4382 sm
4383 sm
4384 sm
4385 sm
4386 sm
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
4391 sm
4392 sm
4393 sm
4394 sm
4395 sm
4396 sm
4397 sm
4398 sm
4399 sm
4400 sm
4401 sm
4402 sm
4403 sm
4404 sm
4405 sm
4406 sm
4407 sm
4408 sm
4409 sm
4410 sm
4411
4412
4413
4414
4415
4416
4417
6001
6002
6003
6004
6005
6007
6008
6009
6011
6012
6013
6014
6015
sm
sm
sm
sm
sm
sm
sm
ds
ds
ds
ds
ds
ds
ds
ds
ds
ds
ds
ds
ds
6016 ds
Wrong function used to set a synch reference on local node - param1: portRef
smCfgReceiveSatConfig() failed - param1: nodeId, param2: slotId, param3:
boardType.
Failed to update the active trial licences in the EIM
Alarm: a trial licence has expired - param1 contains the trialLicenceId, which is a
member of ArVntFeatureLicensingC::TrialLicIdEnu.
Expiry event requested for undefined trial licence
finUnique() failed Parameter 1: findUnique parameter Parameter 2: identifies
the location of the error report in the code
Could not find database entry for node. Parameter1: Node ID
Could not set DateC / TimeC instances to current time. This should never
happen.
Failed to update the OIM attribute LocalNode::lastTrialLicUpdate.
Circuit board type limit exceeded - param1: circuit board type, param2: nodeId,
param3: slotId
Module family limit exceeded - param1: circuit board type, param2: nodeId,
param3: slotId
Port type limit exceeded - param1: port type, param2: nodeId, param3: slotId
Port subtype limit exceeded - param1: port subtype, param2: nodeId, param3:
slotId
Failed to perform database backup before PBX restart
SmNwkPublicInterfaceC::getProduct(nodeId) was called for a node which is not
currently configured.
SmNwkPublicInterfaceC::getCountry(nodeId) was called for a node which is not
currently active.
Unsuccessfully tried twice per second for two minutes to perform an immediate
database backup before restarting
Filesystem prebar request was unsuccessful
Failed to read MAC address from EIP
DHCP failed to get an IP-Address for an EIP1 module. Param1: Slot ID
Param2: SubSlot Id Param3: EIP1 module not successfull configured. SM-Port Reference or IP is undefined.
Param1: Slot ID Param2: SubSlot Id Param3: Unexpected EIP1 device state
Invalid Office (AD2) port reconfiguration
Invalid DASL port reconfiguration
Failed to find EIP Physical Port instance
Failed to create an EIP Status instance
Failed to find EIP Status instance
Primitiv receive error
Flash copy error.
Unknown Major received in dsMainProc()
Unknown signal Major for proc dsMainProc
No more memory for new Office datas
This <Office> datas are not within the Office memory range
Unknown flash memory for PLATFORM_BCS8 to clear
Unkorrekt Office memory block fot PLATFORM_BCS8
Unkorrekt Office data memory block during set the portlist
Office DB can't initialise correctly because corrupt RAM data blocks
Office DB can't initialise because boot entry pointer in RAM corrupt
Memory size for memory administration is to small (min : 40 * sizeof(UInt32)
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
6021 ds
6022 ds
Data base for this Office corrupt because of defect RAM contents
KDM opened twice.
Key isn't valid.
No long Click possible.
no sector found to reorganize. there is no sector with enough space to store a
block, even after reorganizing a sector.
writing a block failed.
6023 ds
starting the blockdriver failed. the flashdata is in a reorganizing state, but the
sector with the most free space has not enough free space that we can write the
valid data of the sector with the least valid data to make one sector totally free.
6017
6018
6019
6020
ds
ds
ds
ds
6024 ds
6025 ds
6026 ds
6027 ds
6028 ds
6029 ds
6030 ds
6031 ds
6032 ds
6033 ds
6034 ds
6035 ds
6036 ds
6038 ds
6039 ds
6040 ds
6041 ds
6042 ds
6043 ds
6044 ds
6045
6047
6048
6049
6050
6051
6056
6057
ds
ds
ds
ds
ds
ds
ds
ds
a handle is invalid. a block should have been deleted, but it's handle is invalid.
parameter is invalid. a byte in a block should have been updated, but either the
handle of the block or the offset within that block is invalid.
updating a byte impossible. update is only possible if each bit turns from HIGH to
LOW or stays LOW. in this update a bit should turn from LOW to HIGH, which is
forbidden.
an invalid handle. a block should be commited, but it's handle is invalid.
lost of data. while scanning a sector which should contain valid data, no valid
block was found.
an invalid handle. should search the next valid block after a specified block, but
the latters handle is invalid.
lost of data. while scanning a sector which should contain valid data, no valid
block was found.
an invalid handle. some information about a block is desired, but it's handle is
invalid.
an invalid handle. a block should be unlocked, but it's handle is invalid.
lost of data. while scanning the sector to be reorganized no valid block is found,
although it should contain some valid data.
allocation failed in reorganizing.
Flash EEPROM backup lifetime (guaranteed max. write zykles) is reached
The checksum of the RAM block is not the same as the just before blowing
FLash EEPROM block
RDfindNext failed: given Primary-key is out of range or otherwise invalid;
parameters: Object Unique Id,PrimaryKey
RDfindPrevious failed: given Primary-key is out of range or otherwise invalid;
parameters: Object Unique Id,PrimaryKey
Database couldn't bind instance; parameters: ObjectUniqueId, PrimaryKey,
binding (ReadOnly / ReadWrite)
DB interface binding failed: given Primary-key is out of range or otherwise invalid;
parameters: Object Unique Id,PrimaryKey
DeleteAll failed
RDCreate Instance with Key failed: Primary key is out of range; parameters:
Object Unique Id, PrimaryKey
RDCreate with Key failed in Database: Primary Key is out of range; parameters:
Object Unique Id, Primary Key, m_status
RDCreate Instance without Key failed; Primary Key is out of range, parameter
Object Unique Id, Primary Key, m_status
KDM closed two times => This situation is not allowederrorid l -6018
KDM check array is corrupt
The daily backup was not successfull two times
The daily backup was not successfull two times
Flash EEPROM page blowing was not ok
Unknown signal Minor in process dsKdmCheckProc
Major unknown or not implemented for dsKdmCheckProc
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
6058 ds
6059 ds
6060 ds
6061
6062
6063
6064
ds
ds
ds
ds
6065 ds
6066 ds
Plausibility test of KDM administration was not ok grep dsKdmAdmin ds/*.c
RD DeleteInstance failed in database; parameters : ObjectUniqueId, PrimaryKey,
m_status
DB interface Instance Delete failed : binding not ok; parameters :
ObjectUniqueId, database instanceId (m_Id)
DB interface Attribute Access failed: binding not ok; parameters :
ObjectUniqueId, database instanceId (m_Id), binding (ReadOnly or ReadWrite).
KDM-test-Error: 400 --> KDM datas are korrupt
No Flash device found/no persistent memory available.
Block of known object with unknown (obsolete?) specs found - delete it.
Remote DB: Writing changed data back failed (no interface or mismatch
between client/server versions).
Locking failed (other concurrent transaction holds it). Not a bug if concurrency
can happen here.
6094 ds
6095 ds
Duplicated Unique Object IDs. PANIC! System can't be started this way - no way.
Object could not be started.
Stopping Object failed.
Remote DB: Database server did not respond in time (is probably down) - give
up this access.
Remote DB: Access to illegal board (boardId out of range).
Old DB data detected - first start performed automatically with loss of existing
data.
PeerDying signal for non-existing interface received - signal ignorred.
Write during transaction commit failed - rollback transaction.
Block of unknown object found - delete it.
Restarting by system crash aborted transaction commit failed during recovery DB may be inconsistent.
Recovery was not completely successful - delete uncommitted blocks.
Client/Server database version mismatch - please bring both boards to same
level
find context not initialized (missing findReset or findNext after get)
// findNext after failed findNext (or the like)
Remote DB: Instance Interface called with invalid transaction id.
Remote DB: Instance Interface called with invalid transaction id.
Remote DB: Instance Interface called with invalid transaction id.
Remote DB: Invalid transaction id.
Remote DB: start response signal contains garbage
RemoteDB: Size of data received from server is bad.
Office terminal attributes brought into valid range.
Remote DB called while KDM open. Can cause messed up KDM write protection
with address error crash.
Version transfer error occurred. The transfer proceeded, but the database may
be in an inconsistent state. A Firststart is recommended.
DB: object found during startup/recovery that is not at least of type block.
Illegal version transfer phase entered. Transfer skipped and advanced to next
one.
Database version lost. Version before version transfer was guessed.
Non-permanent object left on database stop. Version transfer did not cleanup
properly.
Database Startup Information: Firststart performed due to domain startup
request.
dspAnnounceOrigTerm: called with invalid terminal type.
6096 ds
DB Recovery: block in storage found the object does not use to store its blocks.
6067 ds
6068 ds
6069 ds
6070 ds
6071 ds
6072
6073
6074
6075
ds
ds
ds
ds
6076 ds
6077 ds
6078
6079
6080
6081
6082
6083
6084
6085
6086
6087
ds
ds
ds
ds
ds
ds
ds
ds
ds
ds
6088 ds
6089 ds
6090 ds
6091 ds
6092 ds
6093 ds
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
6120 ds
DB Recovery: block with 'out-of-range' block id found.
DB Recovery: Two blocks for same object with same block id but different
content found. One deleted.
DB Reorg: block found for object we don't know. Block deleted.
Transactioning: transaction started by idx twice by recovery. Second attempt
ignorred.
Transactioning: run out of ids.
dsp: invalid key id (defId/locId).
Remote Database: client-side object definition does not match to one on the
server side. Bring boards to same software version.
Database Flash is completely full and can not be reorganize anymore. Firststart
is required.
Database: Flash Full. Try to delete data block-wise. Firststart might be required
in worst-case.
DB: Firststart did not work. Still blocks around.
Remote DB: Cannot handle request as database is not active!
Corrupt data written to flash or header not updated correctly
No valid flash sector evaluated
Call logging flash sectors not initialised or conflict in evaluating active sector
Call Logging Data Memory Overflow
Corrupt or uninitialised database - firsstarting.
Old DB data detected - first start performed automatically with loss of existing
data.
Ds RUL Backup Restore - Restore - Error Accessing Software Manager
Ds RUL Backup Restore - Restore - Could NOT open rollback file
Ds RUL Backup Restore - Restore - Error opening rollback file
Ds RUL Backup Restore - Restore - Error Decompressing Rollback file
Ds RUL Backup Restore - Restore - Error allocating temporary space for
decompression
Ds RUL Backup Restore - Restore - Error allocating space for decompression
block
6121
6122
6123
6124
6125
6126
ds
ds
ds
ds
ds
ds
Ds RUL Backup Restore - Restore - Error allocating space for contiguous block
Ds RUL Backup Restore - Restore - Error writing block to flash
Ds RUL Backup Restore - Restore - Invalid Block Checksum
Ds RUL Backup Restore - Restore - Error moving to end of current block
Ds RUL Backup Restore - Backup - Cant open rollback file (for writing)
Ds RUL Backup Restore - Backup - Compression didn't finish successfully
6127 ds
Ds RUL Backup Restore - Backup - Cant close the restore (RUL - rollback) file!
Ds RUL Backup Restore - Backup - the one and only SoftwareManager must
always exist
Ds RUL Backup Restore - Backup - PutNextCompressedBlock - fwrite
unsuccessful
DsIdx - Map - Non-unique key used for attempted insert into map
6097 ds
6098 ds
6099 ds
6100 ds
6101 ds
6102 ds
6103 ds
6104 ds
6105
6106
6107
6108
6110
6111
6112
6113
ds
ds
ds
ds
ds
ds
ds
ds
6114
6115
6116
6117
6118
ds
ds
ds
ds
ds
6119 ds
6128 ds
6129 ds
6130 ds
6131 ds
6132 ds
6133 ds
6134 ds
6135 ds
6136 ds
6137 ds
6138 ds
Ds Idx - Tree - Index is too big. Cannot allocate temporary table for tree nodes
trying to write data beyond range of call logging data memory
Key is undefined. Cannot use an undefined key with indexing.
Nested Transaction Attempted. Two occurrences of DsTransaction active in the
same process.
Call to dsbdrflash:deleteBlock failed.
There was an error updating the handle in the block table identified by the object
and block Id
Error writing object block to flash
Found a flash block to be backed up which is marked for deletion.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8001
8002
8003
8004
8005
8006
8007
8008
8009
8010
8011
8012
8013
8014
8015
8016
8017
8018
8019
8020
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
Error Mapping DsTbxMenuEnuC to MaTbxMenuEnuC - undefined value
Wrong subtype for normal object
deleteBlock has calculated values for valid and invalid data in a sector which are
impossible.
object created for version transfer has different specs than the one created
statically for general use
packed size of dsIns object exceeds object max size
packed size of dsIns object exceeds object max size
Unsuccessful rollback following failed write
Unsuccessful commit of unfinished transactions following rollback
Corrupted data detected in flash block
blockScan() has been passed an invalid startadr (not 32-bit aligned)
A transaction in id has been used which indexes a null pointer. The database
may be irreci overably corrupt.
flash write error
flash erase error
flash read error
No empty flash page found.
This is a corrupted call logging data page.
Not able to find active call logging data sector in parallel flash.
A backup error has occurred and a notification of the error has been received
from HD. Parameter contains the PlBackupErrorEnu describing error.
Too many members for building a new conferenceToo many members for
building a new conference
function xaItfXCourtesy, Unknown Courtesy mode
invalid group number or to big delay-time for courtesy
invalid group number for courtesy
invalid group number for courtesy
invalid group number for courtesy
invalid group number for courtesy
invalid group number for courtesy
invalid courtesy-command
invalid ddi number for courtesy-group
invalid ddi number for courtesy-group
XaSwitchPositionTypeC: unknown day-night-weekend variant
MajorCourtesy, no valid Minor defined
Invalid trunk reference value
external number too long (for the type)
COUNTRY_I : A wrong timer tryes to start
COUNTRY_I : A wrong timer came
unknown device cannot send a mail waiting indication
This device is not able to handle MWI messages
Dect HS is unsubscribed
8021
8022
8023
8024
8025
8026
8028
8029
xa
xa
xa
xa
xa
xa
xa
xa
Overflow, too many DECTHandset instances for UInt8. (No more used since I5)
Invalid msn value for this interface
Invalid input parameter: Subscriber Ref, Port Ref, MSN
call to set bitset of dect handset has failed
TypeOfCallForwardingEnu: enum value out of range
wrong type_of_cf in check_short_num
invalid switchGroup or SwitchPosition passed to xaSwgSetSwitchPosition
invalid switchGroup passed to xaRouGetSwitchPosition
6139 ds
6140 ds
6141 ds
6142
6143
6144
6145
6146
6147
6148
ds
ds
ds
ds
ds
ds
ds
6149
6150
6151
6152
6153
6154
6155
ds
ds
ds
ds
ds
ds
ds
6156 ds
8030 xa
8031 xa
invalid trunkRef or switchGroup passed to xaSwgSetAnalogTrunkSwitchGroup
invalid trunkRef passed to xaSwgGetAnalogTrunkSwitchGroup
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8032
8033
8034
8035
8036
8037
8038
8039
8040
8041
8042
8045
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8047
8048
8049
8050
8051
8052
8053
8054
8055
8056
8060
8062
8063
8064
8065
8066
8068
8071
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8072 xa
8073 xa
8074
8075
8076
8077
8078
8079
8080
8081
8082
8083
8084
8085
8086
8087
8088
8089
8090
8091
8092
8093
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
invalid digTrunkGroup or switchGroup passed to
xaSwgSetDigTrunkSwitchGroup
invalid digTrunkGroup passed to xaSwgGetDigTrunkSwitchGroup
invalid ddiRef or switchGroup passed to xaSwgSetDdiSwitchGroup
invalid ddiRef passed to xaSwgGetDdiSwitchGroup
invalid switchGroup passed to xaSwgCheckSwitchGroupPermission
wrong switch case: CFU, CFB, CFNR accepted only
error: not in enumeration day/night/weekend
xa-node-status = Exit (wrong)
bcsRef out of Range
no memory to alloc a ccbs-data-block
not expected nc_facility_param
wrong NC-node-state at the receiption of an external Register-Message
The NC-node that received the message CCBS-T-Resume is not a CCBS-node
The origin-BcsRef in function nc_x_sfc_cbi is out of range
invalid trunkRef or group number for courtesy
invalid trunkRef for courtesy
invalid digTrunkGroup or group number for courtesy
invalid digTrunkGroup for courtesy
ASN.1 decomposed data-block has invoke-comp-datas
ASN.1 decomposed data-block has returnResult-comp-datas
ASN.1 decomposed data-block has returnError-comp-datas
ASN.1 decomposed data-block has has an unknown-component-type
ASN.1 decomposed data-block has invoke-comp-datas
function xaCheckHuntTrunk: inPortRef == NoPortRef
function xaCheckHuntTrunkGroup: TrunkGroup == EmptyTrunkGroup
function xaCheckHuntTrunkGroup: TrunkGroup == NoTrunkGr
No CCBS-node has been found
No CCBS-node has been found
composing Asn.1-data: unexpected facilityParam
composing Asn.1-data: function:insFacCcbsTErr: unexpected facilityParam
No User responding alarm Type Alarm: Parameter: DdiRef, TepId, Node ->
MDT Alarm: NoRespFromUser(18)
.
System Overload alarm in xaexthunting Type Alarm: -> MDT Alarm:
SysOverload(19)
Incorrect case value in switch statement
Incorrect case value in switch
Tone switching failed
DECT Cf unreachable number - length too long
LCR: Invalid Character in Digit String
LCR: Invalid Timer Send Type
Invalid Csy Group found
unknown minor from majorXaNs received in XA
illegal nodestate in int_tim_exp. with parameters extended
try to insert a name into the abc-list which is already in there
Untreated ns value.
Incorrect case value in switch (ns)
Incorrect case value in switch (ns_ph_ind)
Incorrect case value in switch (ns_ph_ind)
Incorrect case value in switch (ns)
LCR: Unable to identify Subscriber / Trunk Nodes
No ddi number found to a ddi-ref ??!??
setup with an invalid bcsref. produces later error-id 12012
setup with an invalid bcsref. produces later error-id 12012 and 8092
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8094
8095
8096
8097
8098
8099
xa
xa
xa
xa
xa
xa
8100
8101
8102
8103
8107
xa
xa
xa
xa
xa
too long loop in nc_check_ug_next. stop it because of watchdog-superviser.
br5290
unexpected selection in this state
can't set new channel-owner
unknown phase in treat node
unknown node-state encountered
node not found from given pref/b-ch
This function is designed for EXACTLY ONE LCR System Obtect to exist See
Parameter for the number that have been found
wrong facilityParam in insFacAoc
Allocation of bcsRef failed
No trunk-group has been found for this portref and chanGrp
In function xaFacPaReRejStartExtCf, PaRe-xa-node has no called_link
8110 xa
Function xaGetGroupedDivReason: subscriber has an unknown call-forwarding
Function checkAndSetPaReAllowedBit: subscriber has an unknown callforwarding
8111
8112
8113
8114
8115
8116
8117
8118
8119
8120
8121
8122
8123
8124
8125
8126
8127
8128
8129
8130
8131
8132
8133
8134
8135
8136
8137
8138
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
Function checkAndSetPaReAllowedBit: No Trunk-Group found for this portref
Could not create LCR number. It should have been possible
Unexpected value for type of service provider
Cannot initialise LCR system for first start
Cannot find table entry
cannot access table entry
cannot access table entry
cannot remove table entry
wrong call of anal_ext_hold_ind
wrong call of anal_ext_retrieve_ind
wrong param: rej_notind_param
allocation of b-channel failed
not expected Info-Element in q31IEP of ASN.1 decomposed data-block
No correct sigP in function xaSaveAsnPosBcHlcLlc
function xaIfTakeAsnPartyNumber; couldn't allocate an if-block
function insPublicPartyNumber: only an empty-number could be insertet
function insQ931InfoElement: allocated Memory too small-> controlled crash
No CCBS-Block found (P-MP-CCBS)
function xaXAsnOpDcrFac: unknown facilityParam
function xaXAsnOp: unknown facilityParam
function call_back_subs: CCBS-Record has no ifPointer
DDI destination not valid.
Trunk destination not valid.
Problem with tReference
facilityParam not valid
Invalid fac param
NumPlan access with illegal analType/numRef combination.
Channel number too high
8139
8140
8141
8142
8143
8144
8145
8146
8147
xa
xa
xa
xa
xa
xa
xa
xa
xa
a nc hanger single/disc was found. was hanging 1-2min. ibus stoppen 1min later
Invalid Message extern in anal_ext_suspend_ind
Invalid Message extern in anal_ext_resume_ind
function insFacCallReroutingInv, undefinded CF
function insFacCallReroutingInv, no CF programmed
Message Resume: Call_ref is not from the same S-Bus
underflow in counting incoming calls to a calldistribution
channel group >= XaCgNrIdC::Max
Unknown value for xaNotifInd.
8108 xa
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8148
8150
8151
8152
8153
8154
8155
8156
8157
8158
8159
8160
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8161 xa
8162 xa
8163 xa
8164 xa
8165
8166
8167
8168
8169
xa
xa
xa
xa
xa
8170
8171
8172
8173
xa
xa
xa
xa
8174 xa
8175 xa
8176 xa
8177 xa
8178 xa
8179 xa
8180 xa
8181 xa
8182
8183
8185
8186
xa
xa
xa
xa
8188
8189
8190
8191
8192
8193
xa
xa
xa
xa
xa
xa
Unexpected Phase-Status combination at either nc_msg_node_p or
peer_node_p.
datacalls from analog trunk not possible; only telefony calls
Undefined CcbsDataType in analCcbsTmoInd
Undefined TimerEvent in analCcbsTmoInd
Port or Subscriber instance not found
function xaCcbsGetNewRef or xaGetNewLinkageId, no more free values
function xaCcbsDeleteRef or xaDeleteLinkageId, values out of range
function exaCcbsStatusRequestRr, No CcbsNode found
function exaCcbsStatusRequestRr, Unknown CcbsDataType
no CcbsDataBlock found at the reception of FacCcbsRequestRr
no CcbsDataBlock found when sending a CcbsCallInv to publ network
The linePref is not found in any Bundel !
function xaXAsnOpDcrFac, case case FacCcbsStatusRequest..Rr, no
CcbsDataBlock found
function xaXAsnOpDcrFac, case case FacCcbsEraseInv, no correct CcbsRef
received
Function called with invalid argument
Incompatible Terminal type or Terminal not found.
The passed facParam value is either "FacNoParam" and thus not allowed to be
passed to this function, or a value that is not handled correctly here.
Inconsistency encountered while removing CallRequest instance.
Oh, I have detected a hanging bcsRef. stop internal IBUS-Tier
AppointmentCall instance could not be created.
unknown callDistribution-Type
data could not be stored in database P1: destination sref P2: msg id P3:
originator sref
Invalid function argument, inconsistency
deviceNr: default case of DeviceNr different from 1 or 2
DeviceNr: Default case for deviceNr different from 1 or 2 in case DevDoor.
dest_state: Default case if different from TRUE or FALSE in the switch of the
DevRemoteMaintenance case.
dest_device: Default case if different from DevDoor, DevRelais or
DevRemoteMaintenance
Digit Barrier not found.
Database access problem.
Too many QSIG licence required following the actual licence limitation on the
system. Incoming calls.
WRONG QSIG LICENCE: Exceded the number ogf autohrised QSIG chqnnels.
call-waiting target not defined/found
unknown ASN.1 operation received in Facility message
User Alarm *77xxxx Type Alarm: -> MDT Alarm: TestAlarm(24) My first task
at Ascom: introducing a new alarm, called "user alarm" which is used by typing
"*77" followed by four digits in the range of [0..9]. These four digits are the
alarming-paramete
not treated ASN.1 operation received in Facility message
unknown or no ASN.1 operation received in FACILITY message
not treated ASN.1 operation received in FACILITY message
Error when trying to find a unique port with a unique id in
xaCheckPortForIpRouter()
In connectRemoteControl, the RemContr-node has an called- or calling-node
In function anal_ext_tim_conf, a non coded timerReason has been received
Trying to send an ASN.1 facility to an internal terminal. [D [D [D [.
The given ASN.1 facility is not allowed to be sent over DSS1.
The given ASN.1 facility is not allowed to be sent over PSS1.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8194 xa
8195 xa
8196
8197
8198
8199
8200
8201
8202
8203
8204
8205
8206
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8207
8208
8209
8210
8211
xa
xa
xa
xa
xa
8212 xa
8213 xa
8214
8215
8216
8217
8219
8220
8221
8222
8223
8224
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8225 xa
8226
8227
8228
8229
8230
xa
xa
xa
xa
xa
8231 xa
8232 xa
8233 xa
8234 xa
8235
8236
8237
8238
8239
8240
8241
xa
xa
xa
xa
xa
xa
xa
The given ASN.1 facility is not allowed to be sent over PSS1_ISO.
There was no message for a forwarded ASN.1 facility IE.
No message has been sent out for the given APDU. See also br23764: Too
many ErrorReport 8196.
Xa has changed its process-priority
wrong reject code in nc_x_reject()
Hold Indication received on external trunk
Call_ref is from different S-Bus
function xaIfRemoveStarAfterFacNmb failed because of wrong parameters
Resume Indication received on external trunk
Suspend Indication received on external trunk
Retrieve indication received on external trunk
Pointer is Null...problem of pointer range...out of scope.
In a Call Hold scenario the disconnect timer was started from an non Etsal
HoldAck and HoldReject both received. Abnormal case. Cleanup of bits was
missed somewhere.
Null pointer. Should be different from Null.
checkHoldState called with wrong paramters.
analIntHoldRej: Wrong call for an external answer.
AnalIntRetrieveRej: error as it should be used only for external call.
Received RetrieveREj message from PSTN while REtrieveREq was not set.
Error.
analIntRetrieveConf: Wrong state as we should be with an external call.
peer_p->call_info_3 & RetrieveRequestSentBit ==0 when we receive
RetrieveConf... problem. Wrong state.
Pointer of the userRecord->calling/called-link is Null. Problem of node.
Pointer Null in xaSetHoldPstn(). Error.
Pointer Null in analExtHoldConf(). Error.
Pointer Null. Error with nc_msg_node_p.
Pointer Null. Error.
Pointer Null. Error of assignation.
Pointer Null. Error.
Pointer null. Error of assignation in XaAbortTreat(void).
Pointer Null in xaHoldClearAllBits(...).
HoldCallHeldBit or HoldRequestSentBit differnt from zero in xaSetHoldPstn().
Error. they should have been cleaned before.
HoldRequestSentBit is not set when we receive an HoldAck back. There are
errors in the bits settings.
Wrong Auxiliary State. It should be HoldIdleState.
Wrong case. We should be on external call and not internal.
Pointer is Null and shouldn't!.
Pointer equal to NULL and shoudn't. Problem of pinter assignation.
Wrong software behaviour. We should receive that indication only in External
calls.
QsigCcbs (Transit with PMP): Activation from PMP accepted The QSIG-CCBSNode has not been found after the CcbsRequestRr from PMP
Problem with channel freeing.
xaAllocAndInitGenDataRec: no memory available
analGenDataTmoInd: wrong genDataState for timerEvent
XaGenDTimCfOnPubIdsnExp
analGenDataTmoInd: unknown timerEvent
Problem in function xaIfSetNr
unknown minor from MajorXaGen received in XA
function xaDdiGetBasicServBit: no valid basicServ entered
function xaDdiAdaptDivInfo: no valid basicServ entered
xaAnalInterrogationDiv: count of interrogationanswer is >= 29
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8242
8243
8244
8245
8246
xa
xa
xa
xa
xa
8247 xa
8248 xa
8249
8250
8251
8252
8253
8254
8255
xa
xa
xa
xa
xa
xa
xa
8256 xa
8257 xa
8258 xa
8259 xa
8260 xa
8261 xa
8262 xa
8263 xa
8264
8265
8266
8267
8268
8269
xa
xa
xa
xa
xa
xa
8270 xa
8271 xa
8272 xa
8273 xa
8274 xa
8275 xa
8276 xa
8277 xa
8278 xa
8279 xa
8280 xa
8281 xa
analExtOpIntRr: No corresponding facility found in genDataBlock
switching command returned execution status != success
Error of allocation and forwarding of BCSREF. Software error.
Pointer null. Error in node states and node numbers. It should not happen.
removed dangerous situation for endlessloop concerning usergroups
Error of node auxiliaryState linked to 3PTY and HOLD when a call is going to be
parked internally or externally(Hold on PSTN). Contact 3134Fo in that case.
B-channel transfer failed
Wrong auxiliary State for internal node that may be internally parked. Please
contact 3134Fo for that.
wrong cc type
Error Mapping XaTbxMenuEnuC to MaTbxMenuEnuC - undefined value
Error Mapping XaHomologationEnuC to MaHomologationEnuC - undef value
Timer not found
It was impossible to build up the ASN.1 tree structure.
It was impossible to encode the built up the ASN.1 tree structure.
Wrong counter state for the capolinea in italian software only. External calls and
External on hold calls only.
Wrong counter state for the capolinea in italian software only. External calls and
External on hold calls only. Problem with state from Held to Active.
Wrong counter state for the capolinea in italian software only. Problem of counter
from Active to Held.
due to a bug (br12385) introduced; please see the comments in the asourcefile.
Jan.14.2000, mm2468
failed to map XaTaxSearchEnuC to StTaxSearchEnuC
xaComGetChRangeOfChGrp did not return valid values for startCh and stopCh,
xatelerouting:line 329, Jan 24 2000
invalid BcsRef, line 903, xacommon.cc, Jan. 31. 2000, MM2468, please see
br12565
Acd Server Out of service
Try to delete the PinCode in the TerminalData object, but cannot find the
TerminalData from the SubscriberId.
An internal subscriber has been selected, but the IfSelection is lost
checkPinCode has return TRUE, but there is a problem with IfPointer
Problem in putPinCode, during the shift of the selection
Cannot find the subscriber for the PinCode execution
During a successfull PinCode execution, this node-state is not implemented
There will be a problem with PinCode execution, because 2 nodes should be
identical, but there are not ...
During a successfull PinCode execution, this node-state is not implemented
The subsc-ref send from the NS is invalid or undefined !
Problem with Pointer being null in anal_int_tim_. SOmething is wrong Problem of
collisions? Was a crash here before that fix.
index in xaallcaching.cc, xaCach... out of Range
Problem with the BCSRF
and a PRA. Crashes....
Porblm em of pointer that is nyll. It should not be. Problem with the bcsref
table.PRA crash.
Pointer
parameter of that function is notr valid. Eorr or
Pointer lniks problem. It should not be null....problem with PRA access. No
problem with BRA...and Italy software only.
Pointer extension link is wrong. PRA problem and crash with Italy. Fix for
it. BRA no problem. ,
Wrong call mode type for that node.
catched signal which did not have a handler in xabgproc
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8282 xa
8283 xa
8284 xa
8285 xa
8286 xa
8288
8289
8290
8291
8292
xa
xa
xa
xa
xa
8293 xa
8294
8295
8296
8297
8298
8299
8300
8301
8302
8303
8304
8305
8306
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8307
8308
8309
8310
8311
8312
xa
xa
xa
xa
xa
xa
8313
8314
8315
8316
8317
8318
8319
8320
8321
8322
8323
8324
8325
8326
8327
8328
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
allocatioin of DDI-Cache not possible: size would be bigger than size of the
maximumblock one can allocate
Wrong parameter. Null Userrecord node given a an incoming parameter.
No more free handsetTIDs : must not happen
Division by Zero Error ;-) i.e. no subscribers defined/configured, maybe caused
by an AIMS-crash before ???
valid DDI in DDI-cache should be overwritten, please have a look on it if this is a
valid action
check that the process which calls xamonrouting is really the ncProc, otherwise
produce (at least, normally the PBX should crash) this error
Network slave received signal with incomplete data.
not possible to allocate bcsref for FACILITY message
This device is not able to handle Mail MWI
this Sref is not able to handle Mail MWI
This id is for the alarm, LcrFallBackAlarm, which is triggered if a call goes out
over a secondary provider, or a default route, that is to a public network
(indicating that the call will probably cost more money than the original route).
See fdoc 165 and
no invokeId value has been generated for the invoke generate the invokeID
(should be done in the sendAPDU() function)
no session or the A-side type is not ok
CCBS Session-Timer Expired ... but CCBS no more activ !
ETSI terminal specific timer for a non ETSI terminal
the A side must be IntEtsi, but apparently it's not!!!
we would need a sessionId, but nothing has been passed or found!!!
invalid value for subscriberState (neither Free nor Busy)
no session or the A-side type is not ok
the A-side type is not ok
invalid CCBS B-Side type
invalid CCBS B-Side type
type of the CcbsSide not correct.
Network slave received unexpected signal.
Network slave overload! Alarm call check could not run during more than 1
minute!
XaRegularCheck instance not created or lost.
2 parameters of xaXEtsiAlarmSetup was NULL or all Bcsrefs busy
External remote control failure
unknown notification indicator value.
Switch default that should not be used in anal_tim_ext_conf
Unable to switch the owner bcsRef of the B-channel in a long call situation after
an inquiry call on the public network.
Failed to create conference connection.
Failed to add member to the conference connection.
Fxancxconnect.cc Failed to create connection.
Failed to create announcement connection.
Failed to retrieve from hold connection.
Failed to add member to connection in xaNcxXAddConnect().
The member to add is already in another connection
Failed to create twoWay connection in xaNcxXConnectTrunc()
Failed to create oneWay connection in xaNcxXConnectTrunc()
Failed to create oneWay connection in xaNcxXConnectTrunc()
Failed to create twoWay connection in xaNcxXConnectTrunc()
Failed to create oneWay connection in xaNcxXConnectTrunc()
Not considered case, for switching through with analog trunks
Failed to create twoWay connection in xaNcxXConnectTrunc()
Failed to allocate switch object.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8329
8330
8331
8332
8333
xa
xa
xa
xa
xa
8334
8335
8336
8337
8338
8339
8340
8341
8342
8343
8344
8345
8346
8347
8348
8349
8350
8351
8352
8353
8354
8355
8356
8357
8358
8359
8360
8361
8362
8363
8364
8365
8366
8367
8368
8369
8370
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8371 xa
8372 xa
8373 xa
8374 xa
8375 xa
8376 xa
8377 xa
There's already an allocated switch object using a different B-channel.
Invalid connection type when trying to start two way connection.
Invalid connection type when trying to start one way connection.
Someone deleted a hotline instance although this is no more allowed.
A hotline instance is missing and we weren't able to create recreate it!
queue of msgreceiver seems to be full or we cannot write msg for another
eqason
function xs
[Dx_sfc_rcdcc: cas of hold on PSTN b-chan-problem.
ddi number without relation to call distribution
ddi number without relation to a ddi numbering plan
no valid direct entry for subtype operator
direct entry for subtype not valid operator
no valid direct entry for subtype Emergency
direct entry for subtype not valid Emergency
no valid direct entry for subtype CostCentre
direct entry for subtype not valid CostCentre
no valid direct entry for subtype StarReplacement
direct entry for subtype not valid StarReplacement
no valid direct entry for subtype ExternalAccess
direct entry for subtype not valid ExternalAccess
no valid direct entry for subtype LocalNode
direct entry for subtype not valid LocalNode
no valid direct entry for subtype NetworkSubscriber
direct entry for subtype not valid Networksubscriber
no valid direct entry for subtype UserGroup
direct entry for subtype not valid UserGroup
no valid direct entry for subtype Abbreviated
direct entry for subtype not valid Abbreviated
no valid direct entry for subtype Door
direct entry for subtype not valid Door
no valid direct entry for subtype HDLCTerminalAdaptor
direct entry for subtype not valid HDLCTerminalAdaptor
no valid direct entry for subtype Subsrciber
direct entry for subtype not valid Subscriber
no valid direct entry for subtype CallDistribution
direct entry for subtype not valid CallDistribution
no valid direct entry for subtype route
direct entry for subtype not valid route
inconsistent database
to complex
Allocating BcsRef not successful
unused dynamic line found that has not been set to idle
The id pointer is null if this error report is hit. For error id 8370 '.'
The InterpreationAPDU is invalid in switch statement for function
XaAsnFacilityIE::decodeAndTreatAPDUs().
Error in Receiving an SMS
br18030 means that ChannelUnacceptable occurs for an internal call which is
impossible. This errorlog records each occurnace to try to track the problem
down.
something is wrong, this b-channel shouldn't be busy, free it. We sent back to
the ACD server a RelComp with RequestedChannelNotAvail but This Channel
shouldn't be busy at all, so free it and allocate it again
Still problems with the B-Channel admin of the ACD port, capitulate.
xSfcUnlink is called with uncoded parameter
This error report corresponds with br 18615 raised due to an initial crash log. '.'
'
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8378 xa
8379 xa
8380 xa
8381 xa
8382
8383
8384
8385
8386
8387
8388
8389
8390
xa
xa
xa
xa
xa
xa
xa
xa
xa
8391 xa
8392 xa
8393 xa
8394 xa
8395 xa
8396
8397
8398
8399
8400
xa
xa
xa
xa
xa
8401 xa
8402 xa
8403 xa
8404 xa
8405 xa
8406 xa
8407 xa
8408
8409
8410
8411
xa
xa
xa
xa
8412 xa
8413 xa
for br18792 null pointer crash '.'
To check for valid additions or deletions into the xa active node list.
Destination not handled in this state.
This error occurs when XA calls xaConShareSwitchObject with a value of
origObjId that has already been shared, or the extension link node has already
had its switch object shared.
This error is raised in the event of xaConCreateTwoWayConnection being called
wthout allocating switch objects for the specified bcsrefs
DECT Follow-Me:negative response from QSig-Trunk
DECT Follow-Me:negative Response of an StarOrHash-Activation
DECT Follow-Me:Timeout of Register-Msg (no Answer given to terminal)
DECT Follow-Me: Strange Answer or no Answer from QSig-Trunk
generic errorid for xa domain (as to stop using 65535)
Switching failure has occured. 1. ConnId 2. MasterBcsRef 3. Error (enum)
Unhandled switching API call from domain other than XA
Invalid parameters passed to the XA switching error handler
A node has entered bye_bye_user with an undef b-channel and an allocated
switch object. This will lead to the switch object not being freed, which causes
audio problems.
Related to br19986: The hanging nodes detector has found a node with no
corresponding active BcsRef and no active CallControl. Node has been cleaned.
The required b-channel could not be allocated during retrieve from the PSTN
The required b-channel ccould not be allocated to retrieve a call parked on a line
key
a cast operator is out of date, its name is given in parameters.
see br21379: for some reason someone succeeded when trying to change a
number through the numberingplan, please report this error.
In function xaCheckDiscNodes, a not disconnected node has been found
Er function fillInHead failed, params messtype, portref, bcsref
Unknown enum value for trunk-trunk permission of subscriber
illegal enum value for trunk-trunk setting
in function xaNcxHandleMsgSig(): an unrecognized minor was received, this
might indicate a new feature that is not yet implemented completely
in function hdlMsgCommand(): an unrecognized command was received, this
might indicate a new feature that is not yet implemented completely
NcTimConf-Timer exipired but the corresponding node (param 1 is the bcsref) is
no more active. the portref of the old (no more existing) node is seen in param 2.
The signal is dumped afterwards. Related to an symptom-fix of br22709
NcTimConf-timer exipred in an untreated state (external). 1st param = bcsref
2nd param = node-state
NcTimConf-timer exipred in an untreated state (external). (1st param = bcsref)
(2nd param = node-state)
A node has will be set to hold. We cannot set the new Timer because he's
already used
A node will be set to hold. We overwrite the old Timer with the new hold-timer.
doDeliverBChannelToOtherConnection is called differant than defined in the
switch
The timer with reason XaPeerHoldTmo has been overwritten
A functional request to open a door with an invalid id.
Invalid device-switching request. Neither door nor relais.
functional request to login to a user group has been rejected because of invalid
values.
unknown CallForwarding option. something else than CFU CFNR CFB
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8414
8415
8416
8417
xa
xa
xa
xa
8418
8419
8420
8421
8422
xa
xa
xa
xa
xa
8423 xa
8424 xa
8425 xa
8426 xa
8427 xa
8428 xa
8429 xa
8430 xa
8431 xa
8432 xa
8433 xa
8434 xa
8435 xa
8436 xa
8437 xa
8438 xa
8439 xa
8440 xa
8441
8442
8443
8444
xa
xa
xa
xa
8445 xa
8446 xa
Not valid number type for this operation. Missmatch between check and put
function.
Invalid Protocol coding.
REGISTER message received in wrong state (not in state 1).
Not supported return value to convert.
A node will be set to hold. We overwrite the old Timer with the new hold-timer.
dial information has been lost !!! (XaSelectionStrC is longer than IntNumStrC)
Not allowed to set delay time for this voice group.
Trying to exceede maximum courtesy delay time.
function xaGetVoiceMailFacArt is called with a wrong inputType (typeOfCf)
function xaAllRingsToTimer (old: rings_to_timer) is called with param rings out of
range
We try to find the right XaCLIPSpecification for a certain Node. However
someting in the Database isn't alright. There is may be an inconsistency or what
else could be that the code asking the database is faulty ;-) Parameter 1 is
ArLocaleIdC
function xaNcxXSingleFacReq is called without a defined NSF in param
facCodeRec.
The function xaXCallSpecialTarget is called with a wrong param or could not be
executed correctly (see param)
When converting info messages for ERC, XA was unable to associate an info
message with the bcsref that send it.
in fuction nc_init_prim_ns_and_cc, ncSigP->param (bcsRef) is out of range
CsyCourtesyRecordingStopped message holds portReference and channel but
no valid bcsref is associated to that tuple.
A database problem, a subscriber without a node?
Neither the subscriber nor the node had a reference to a Locale. This should
never occur.
Looks as if we have a trunk without a Node! Seems to be a database problem.
node with no portref - can't be must be some kind of database problem
For some weird reasons there is no Locale (Database?) Read the country from
the license chip for the time being
For some reason there is no Locale (Database?) for this XaNodeC to be able to
continue, we read the country from the license chip
in func xaAllMap2SmCountry() The input country is a non supported country,
most likely this is simply a coding bug (someone forgot to update this func
when introducing a new country).
We should never get this far in this function! For some reaseon neither bundle
nor node had a reference to a Locale. Is this a database bug?
when looking up the charges per impulse for a given trunk (via its XaNodeC*),
there was no XaChargeCostSpec object found in the database how can this
happen?
In function xaXSendNsf, the param l3Msg is not expected (default-case of switch
instruction)
Operator >= has been called. Function implemented (not tested yet)
when looking up the `charges per impulse' and the `exchange rate' for a given
trunk (via its XaNodeC*), there was no XaChargeCostSpec object found in the
database --> how can this happen?
In function nc_exa_nsf_1, not valid sub-param for FacVoiceService
In function xaCheckVoiceDeleteText, invalid voice-group
function call_second_phone_cfnr, case of FacCfnrVcml, not possible divertor
compute_nmb_entry in analyse number of if-block got invalid number part to look
up
problem in ebnf-rule for syntax-checker of selections
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8447
8448
8449
8450
8451
8452
8453
8454
8455
8456
8457
8458
8459
8460
8461
8462
8463
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8464 xa
8465 xa
8466 xa
8467 xa
8468 xa
8469 xa
8470 xa
8471 xa
8472 xa
8473
8474
8475
8476
8477
8478
8479
8480
8481
8482
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8483
8484
8485
8486
xa
xa
xa
xa
8487 xa
illegal character in selection to analyse
problem in xaCciIfDublicate
xaCciIfReset called not on an IfSelection block
xaCciIfSetClipEmpty called not on an IfClip-block
problem in xaCciIfTake
problem in xaCciIfTakeNr
xaCciIfGiveFac
if-pointer is NULL
problem in xaCciIfShiftFac: no second number
this type of if-block is not supported by this function
invalid parameter passed to this function
selection too short in if-block
if-block pool run out of if-blocks
not supported node-state
not supported node-state
Unsupported type of number in ton-conversion()
There's an other b-channel already allocated !!
An other CC has allocated the b-channel !! */ ------------------------------------------ */
this code is executed by incomming setup msg from the public in private net.
However the are some substantial differences there have to be taken into
account:
unknown type of channel selection
setup received in wrong node state. Most likely is that the node hasn't been
cleared at the end of the last call. Or it has been reinit by a lost(not stopped)
timer event 500 calls ago.
Unknown not reachable destination.
unsupported enum value XaUnreachableModeC
An unexpected minor of MajorResource has found its way into Xa's main loop.
Someone tried to insert two directory entries with the same number in function
xaNumIdxInsert. Reference is br27386.
During numberingplan population at XA startup two directory entries with the
same number are present (this should never happen) the responsible directory
entry has been destroyed !!!
Tax Recall with charges of 0.00: in function xaNcxXCallAnswer() the database
call to retrieve the charges of the last call [using getLastCallCharge();] from
the individual charge counter object failed Please check the counter object of the
subsc
too many recursive calls of function xaNcxXInfoDigitsRecursive. to prevent
crash br27465
function nc_put_sfc_fac: not treated star-num
function nc_put_sfc_fac: not treated starNmb-num
function nc_put_sfc_fac: not treated analysed num
PublicTeChargeType: enum value out of range
TPTYRequestEnum: enum value out of range
XaNetProtocolTypeC: enum value out of range
XaLocalNode::TrunkTrunkConnectionC: enum value out of range
XaFixedTerminalTypeC: enum value out of range
XaDectTerminalTypeC: enum value out of range
XaNumAnalEnuC: - enum value out of range AND/OR - wrong value of enum
for the corresponding function
DiversionReason or DiversionReasonECMA: enum value out of range
XaRedingInfoC: enum value out of range
XaNetworkTypeC: enum value out of range
Untreated signal in process with Major/Minor combination param1 Major
param2 Minor
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8488 xa
8489 xa
8490
8491
8492
8493
8494
8495
8496
8497
8498
8499
8500
8501
8502
8503
8504
8505
8506
8507
8508
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
xa
8509 xa
8510 xa
8511 xa
8512 xa
8513 xa
8514 xa
8515 xa
IfCommandEnum: enum value out of range
XaNumberPlanOverrideTypeC: enum value out of range
AcdStateArt: xaeratpc3.cc -> enum value out of range xal3st2.cc -> enum
value not treated
HuntType: enum value out of range
PriorityReleaseType: enum value out of range
TrunkGroupType: enum value out of range
XaLineAttenuationTypeC: enum value out of range
XaDiallingModeC: enum value out of range
AttenuationArt: enum value out of range
ReleaseType: enum value out of range
XaDiallingModeC: enum value out of range
XaEtsiDiscEnu: enum value out of range
OfferedCallType: enum value out of range
XaLCRStatusEnum: enum value out of range
LcrStateEnum: enum value out of range
Sp2OfferArt: enum value out of range
ConnectType: enum value out of range
RoutingType: enum out of range
DestArtType: enum value out of range
Undef line in xaRouDistDoRestOfRouting
ChanIdArt: enum value out of range
At Reset a destination Num has been removed eg.: Hotline-num, or emergencynum, etc.
Wrong TepId type (neither Subscriber nor Door) in xaSubSrefToPref
Wrong relation between DoorId and XaDevice & SmPortReference. The SP2Message to open the door won't be sent !
XaDistributionTypeC: enum value out of range
No SmLocation found from the parameters nodeId (ArNodeIdC) & slotId
(SmSlotIdC) received in the Signal MajorPgpSwitch/PgpDnwSwitch
Wrong 'RoutingType' (DNW or Subst) in xaNcxXStoreRouting
Try to read the HwSwitchPosition for a wrong LocationId
8519
8520
8521
8522
8523
xa
xa
xa
xa
xa
Try to set a wrong SwitchPosition for a LocationId (and consider it to DAY ...)
Problem with the local array xaSwgHwSwitchPosition
Invalid SwitchGroup to check the permission to modify it
Wrong parameter in Signal for 'XaSwitchPositionTypeC' (and consider it as DAY
...)
Untreated enum value of FacMesArt
untreated enum value of enum FacilityArt
untreated enum value
A parameter of message VoiceSetup from VC was not correct.
8524
8525
8526
8527
8528
8529
8530
8531
8532
xa
xa
xa
xa
xa
xa
xa
xa
xa
A parameter of message VoiceCommandResponse from VC was not correct.
No Valid Parameters in function xSfcConnectVoice
anal_ext_call_proc is in nc-state 43 without having the XaSmsFsk1Bit set
anal_ext_fac_ind is in nc-state 43 without having the XaSmsFsk1Bit set
anal_ext_info_ind is in nc-state 43 without having the XaSmsFsk1Bit set
In function xaIfCleanNmb, not coded info_art
'index' has TWIN on 'twinTepIdP', but 'twinTepIdP'-number is empty !
no valid direct entry for subtype VoiceMail
direct entry for subtype not valid VoiceMail
8516 xa
8517 xa
8518 xa
8533 xa
function xaNumGetVoiceMailNum is called and no VoiceMail-Num is configured
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8534 xa
8535 xa
8536 xa
8537 xa
8538 xa
8539 xa
8540
8541
8542
8543
xa
xa
xa
xa
8544 xa
8545 xa
8546 xa
8547 xa
8548 xa
8549 xa
8550 xa
8551 xa
8552
8553
8554
8555
8556
8557
xa
xa
xa
xa
xa
xa
8558 xa
8559
8560
8561
8562
xa
xa
xa
xa
8563
8564
8565
8566
xa
xa
xa
xa
8567 xa
A reserve request to RM has returned an unrecognised value of
MrRsvRespCode. The switch case that handles the result needs to be amended.
at the receiption of VoiceSendAlerting, the xaNode has a wrong tepId
at the receiption of VoiceCommandResponse, the xaNode has a wrong tepId
The node to overtake could not be found in a fast take or replace pickup
situation.
The function xaNcxXSendAvsSetupOnXaNode could not be executed correctly
(see param)
function xaRouCheckAndRouteToVmAvsUg shows a problem defined in
Parameter 1. Call on Integrated-AVS couldn't be done
function xaNcaGetFacilitiyArt: analysed value has no case with *function table
at the receiption of VoiceClear, the xaNode has a wrong tepId
at the receiption of VoiceClear, the xaNode has a bcsRef out of range
An MWI-function has been called with an invalid origSubscRef
Subscriber has CFNR or CFB activ, but he is neither Free nor UserBusy (nor
NoChannelAvailable).
recursiv loop detection when activating CFU
Something is missing in the implementation about GSM-Subscriber ... :-(
because this function should never be called for this type of subscriber ! ( No call
of xaRouCheckRoutSingle for GSM-Subscriber )
Try to track information to solve (understand) br27477 If this BR occurs, then
that can be a problem in DB !!!
In the function xaNcxCreateLinkInitNodeForVc, it was not possible to allocate a
new BcsRef.
VM: In function xaNcxAllocDtmfForVmTermDep: Couldn't Allocate a DTMF
Detector
More as 2 ReturnErrorPDU in only one ASN.1 message are came. We don't
support that for now ... (see br30752 as well)
More as 2 RejectPDU in only one ASN.1 message are came. We don't support
that for now ... (related to br30752, but without crash)
A FacilityParam is already stored for this message, and we try to store it for the
second time the same FacilityParam. We have to implement, for example, as
FacSomeKindOfErr & FacSomeKindOfErr2 (but there is no yet
FacSomeKindOfErr3 ...)
The parameter 'infoFacPar' is out-of-range !
function xaGetNodeWithPortRef gets UndefPortRef as input param
Invalid FeaturePermission enum used for this function
No channel or line for voicemail available.
Timer expired, with invalid TimerNr
function xaCheckAndStartNewCall strange situation with NotOk and cause == 0
rout_sg_a was in an endless loop. Loop got broken after > 600 rounds see
br31823
function xaXStartFreeNodeTimer: no free timer found
function xaXStartFreeNodeTimer: unvalid timerNr
function xaXStartFreeNodeTimer: unvalid timerNr
function xaCheckAndDoVmAutoAttEomCase: nodeP is not
XaVMAlertPlayAndRecBit
Received unknown minor-signal with MajorMsg
function xaInitFsAnalogTrunkLine: input param lineNum out of range
Prevent CRASH related to br31982
When attempting to allocate a switch object, CR has returned that the object Id is
already in use. We then try to delete the hanger and allocate a new switch object.
Param 1: ObjId Param 2: Portref Param 3: Channel
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8568 xa
8569 xa
8570 xa
8571
8572
8573
8574
xa
xa
xa
xa
8575 xa
8576 xa
8577 xa
8578 xa
8579
8580
8581
8582
8583
8584
8585
xa
xa
xa
xa
xa
xa
xa
8586 xa
In function insVp7FacInfo, the IE-length is not ok
in function XaCciVpFacInfoListC::findInList strange situation with pointer
function XaCciVpFacInfoListC::treatRemainingElement() finds Elements
function xaNcaCheckAndDoAutoAttDiscTrig, something when wrong, see
params
function xaNcaVoiceDialDigits: BcsRef out of Range
xaNcaVoiceDialDigits: general error
function xSfcReLinkVmAutoAttNode, could not do it, see param
function xaNcaVoiceAutoAttDial: could not be executed du to error, call has been
cleared
function xaNcaVoiceInfo: could not be executed du to error. See param. Call has
been cleared
function xaNcaVoiceUpdateMailboxInfo: could not be executed du to error. See
param. Call has been cleared
function xaNcaVoiceStopAaAction: could not be executed du to error. See
param. Call has been cleared
function xaNcaVoiceChangeAudioPort: could not be executed du to error. See
param. Call has been cleared
at the receiption of VoiceDialDigits, the xaNode has a wrong tepId
at the receiption of VoiceInfo, the xaNode has a wrong tepId
at the receiption of VoiceUpdateMailboxInfo, the xaNode has a wrong tepId
at the receiption of VoiceStopAaAction, the xaNode has a wrong tepId
at the receiption of VoiceChangeAudioPort, the xaNode has a wrong tepId
at the receiption of VoiceInfo, the xaNode has a bcsRef out of range
at the receiption of VoiceUpdateMailboxInfo, the xaNode has a bcsRef out of
range
8588 xa
8589 xa
8590 xa
at the receiption of VoiceStopAaAction, the xaNode has a bcsRef out of range
at the receiption of VoiceChangeAudioPort, the xaNode has a bcsRef out of
range
Something is wrong with database
function xSfcConnNewVmAudioPort, could not do it, see param
8591 xa
function xaNcaExamine109Selection we received a not expected parameters
8592
8593
8594
8595
8596
8597
8598
xa
xa
xa
xa
xa
xa
xa
8599
8600
8601
8602
xa
xa
xa
xa
function xaNcaExamine110Selection we received a not expected parameters
function xaNcaExaFlash109, we received a not expected parameters
function xaNcaExaFlash110, we received a not expected parameters
function xSfcCheckAcdRemAaVcNode, situation not ok
function xaNcaExamine80Selection we received a not expected parameters
function xaNcaExaFlash80, we received a not expected parameters
function xaNcaExaFlash79NotConn, we received a not expected parameters
function xaNcaExamine79NotConnSelection we received a not expected
parameters
function anal_ext_tim_conf nc-state 107, parameters are not consistent
function anal_int_tim_conf nc-state 11,ect, parameters are not consistent
in anal_ext_setup_conf() state 17 when no ccbs is active. bcsref - anal_ext_setup_conf() in state 3 and not ccbs nc_msg_param phase_index_p>bcsRef 0
anal_ext_setup_conf() unknown nodestate of phase_index nc_msg_param
phase_index_p->bcsRef
ns_ph_ind
anal_ext_setup_conf() unknown node of phase_index when nodestate of
nc_msg_node_p is in state 21 nc_msg_param
ns_ph_ind
0
anal_ext_setup_conf() treat the default case if nc_msg_node_p is in state 71
nc_msg_param FacQsigCcbsRequestRr?1:0 FacQsigCcnrRequestRr?1:0
8587 xa
8603 xa
8604 xa
8605 xa
8606 xa
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8607 xa
8608 xa
8609 xa
8610 xa
8611 xa
8612 xa
8613 xa
8614
8615
8616
8617
xa
xa
xa
xa
8618 xa
8619 xa
8620 xa
8621 xa
8622 xa
8623
8624
8625
8626
8627
8628
8629
8630
8631
xa
xa
xa
xa
xa
xa
xa
xa
xa
8632
8633
8634
8635
8636
xa
xa
xa
xa
xa
8637 xa
8638
8639
8640
8641
8642
8643
xa
xa
xa
xa
xa
xa
8644 xa
8645 xa
anal_ext_setup_conf() untreated nodestate of nc_msg_node_p nc_msg_param
ns 0
Attempt to call steal from an unsupported destination type. Parameters 1.
Bcsref 2. Analysis result
function anal_net_timer_conf, case NcTimRefOffer, ns-node not allowed
when sending setup to siptrunk the reservation that was previously successful
failed. however we continue with the call and hope it will be cleared down later
and repeat hunt starts to use the next line.
error mandatory element is missing from the decoded tree! for
CallTransferIdentifyResult ASN.1 feature
No meida channel could be allocated for an appointment call to a SIP-S. The call
will not have any in-band confirmation tone. Param 1: BcsRef.
function xaCciGenDispUnusedButFirstLast called with NULL Pointer
An XaDire subtype instance has been found that does not correspond to an
NpDire subtype instance.
The XaDire and subtype instances will be deleted.
Param 1: Xa subtype Id value Param 2: Xa dire Id value Param 3: Number of
this errorId (look it up
Not yet supported enum value to send out a system service notification
encoding or sending of an xml string caused an error
To many jobs in general call queue. Param0: size of joblist.
Unknown general call code. Param0: 0 = Internal
1 = External
2=
PsaCode1
3 = PsaCode2
4 = PsaCode3
5 = PsaCode4
6
= PsaCode5
No more jobs in general call queue.
function xaAllCheckGetAutoAttSubsTepIdP could not find the tepId in the
xaNode
function xaNcaExamine1AnalExt: anaExtType not considered
function xaNcaExamine1AnalExt: anaExtType not considered
function nc_exa_remote_fac_selection is called with a NULL XaNode address
function xaNcaExamine1Selection is called with a NULL XaNode address
Time Controlled Functions: timed crash of PBX set from AIMS in CM_1_2_9
function tele_serv_on_port called with a NULL callingNodeP
No valid MSN for SIP subs/trunk in UpdateDestinationDetails signal
In function putPinCode a redir is set but it is not an autoAttendant
In function unreserveFromXaNode, the parameter has a NULL value
In function xaCciIfSetTdAtTheEnd, there is an error
In function checkVmDigit, the difference between length and td is too big
In function xaNcxCheckAndRemAutoAttAttrib, the VmAutoAttCallingBit was set
in the VC node
xaNodUnlkAssociated(...): Problem with Associated-Chain !!!
Error in function xSfcSimAutoAttAcdCallTrans
A Relay has a number defined, but its ID is 'Undef' !!! (br37850)
Unhandled enum value for UserServiceNotification
Unhandled enum value in the switch case. New type in RouteSingleModeEnum
in xaroutingsingle.hh
In callSingleExternalEndpoint(), we are trying to create a new node that is neither
Public nor Private ...
error in function xaRouGsmTermRouteInfo in a call to GSM-terminal
error in function xaRouCheckRouteGsmTerminal in a call to GSM-terminal
error in function xaRouRouteGsmTerminal in a call to GSM-terminal
Parameter defining user, terminal and ports are not compatible
Unhandled enum value for TerminalServiceNotification
function xaNcpCheckIfHigherPrioCallTypeForOperator called with unknown
parameter
When answering a call-waiting, the XaNode were in unexpected state
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8646 xa
In function xaCciIfSetSelectionComplete: no ifPointer has been found
8647 xa
In function xaRouRouteSingle, RoutingState of terminal is in a unknown state
In function xaNcaCcbsRecallUserA, RoutingState of terminal is in a unknown
state
failed to create call distribution with Id=1 (reference: br40323: MDT 7.76: In
trunk group the entry for CDE can be zero, errorid 8589 occurs)
portref/msn to terminal conversion failed, because device isn't a terminal.
param 1: pref (upper 16 bit) and msn (lower 16 bit param 2: deviceId param 3:
device subtype
In function checkAndDeliver, a not expected situation happend
Function XaNodAsnRequestTimerC::handleExiry has unexpected values
Function XaNodAsnRequestTimerC::start has unexpected values
In function xaNcxXSingleFacReq (for MWI), RoutingState of terminal is in a
unknown state Parameter 1: destSubscRef Parameter 2: TerminalId
Parameter 3: RoutingState
Free to be used ...
The configured GSM subscribers have reached the max. amount of the
GSM_subsrcriber licence.
in function XaCciSp2FacInfoListC::findInList strange situation with pointer
function XaCciSp2FacInfoListC::treatRemainingElement() finds Elements
In function insSt2FacInfo, the IE-length is not ok
Received XaNsCcbsRecallInd from NetworkSlave, but BcsRef not valid !
In function x_sfc_cwr (Call waiting reject), there is no associatedLink found.
We are checking received DTMF, but IfSelection is empty !
Secure IP Remote Maintenance: Answer from IA-Domain is not known in XADomain !
could not create directory to store xa call statistic files p1: errno p2:
1:/home/logs
could not be created
2:/home/logs/xa
could not be
created
3:/home/logs/xa/call could not be created pp3: 0
No number has been found to send back in a 302 SIP-Message !
No valid portRef or state received in the Signal
MajorPgpSwitch/PgpGenericSwitch used FXS Control Input
Function xaRouSetHwSwitchGroupPort Problem when trying to set a
SwitchPosition via a FXS port (invalid parameter)
Function setAlertingPattern: invalid BCS-Ref
function putActivatePresence gets invalid input parameters
function putDeactivatePresence gets invalid input parameters
Invalid TepId in functions of xancaexastar
Invalid TepId in functions of xancaregister
function xaAllStartGeneralTimer or XaAllStopGeneralTimer have nodeP set to
NULL
function xaNcaAcdCallDeflection has a nodeP with is NULL or inactive
Function xaNcxXStartGeneralTimer has nodeP set to NULL
Function XaNodTimerInfoC::XaNodTimerC::handleExpiry has myNodeP set to
NULL or is inactive
Function XaNodTimerInfoC::XaNodGeneralTimerC::startTimer has timerReason
set to ItalyT4Tmo or ItalyT5Tmo
Function XaNodTimerInfoC::XaNodGeneralTimerC::handleExpirySpecific has
timerReason set to ItalyT4Tmo or ItalyT5Tmo
fsEfsCopy failed while zipping a file in background
In function xaRouCheckAndStartCourtesy(...), the parameters dist
(XaCallDistribution) or/and teld (XaTelephonyDestination) is/are not bound !
Can't create channel-group for AMCC param 1: trunkId param 2: cgId param 3:
buId
Progress received from an internal terminal that we don't handle
8648 xa
8649 xa
8650
8651
8652
8653
xa
xa
xa
xa
8654 xa
8655 xa
8656
8657
8658
8659
8660
8661
8662
xa
xa
xa
xa
xa
xa
xa
8663 xa
8664 xa
8665 xa
8666 xa
8667
8668
8669
8670
8671
8672
xa
xa
xa
xa
xa
xa
8673 xa
8674 xa
8675 xa
8676 xa
8677 xa
8678 xa
8679 xa
8680 xa
8681 xa
8682 xa
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
8683 xa
8684
10001
10002
10003
10004
10005
10006
10007
10008
10009
10010
10011
10012
10013
10014
10015
10016
10017
10018
10019
10020
10021
10022
10023
10024
10025
xa
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10026
10027
10028
10029
10030
10037
10040
10041
10042
10043
10044
10045
10046
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10047
10048
10049
10050
10051
10052
10053
10054
10055
10056
10057
10058
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
A Copy-Constructor is used within CCBS-Session. That can be problematic
regarding to the related timer !
Adding a node to a call failed P1 = bcsRef of new node P2 = call id of existing
call P3 = bcsref of existing call
Default error for CPE
Unknown stimuli
Wrong timer type
Wrong location
An error is occured in DSP read
An error is occured in DSP write
Wrong TTgPe signal
Unknown feature
Wrong terminal type
Wrong term state
Error has been detected in the component manlib
Default error identity for the component (tp)cpc
Exclude list problem
Message decomposition error
Error in message, this message will be ignored
Error in a mandatory info-element
Timeout problem
Message unexpected
Unknown state
Unknown message
The data storage process returns an Unsuccess
Nsf unknown
Wrong feature: this feature is not acceptable in this state
The ksc (key state controler) is in a wrong state
The csc (call state controler) in error state
The tpctlsv module couldn't start the CTLSIGVIEWER agent because of an error
in ssnDefineAgent.
used for connection errors
used for signal errors
Server/Search List handling error
there is no location area with this id
ctl process received no signal
ctl process received a message it didn't recognise (invalid minor)
ctl process received a message it didn't recognise (invalid major)
ctl process received a message over i-channel with an invalid protocol type
ctl received an internal message with an invalid destination
ctl received a message with an invalid length
ctl received message with an invalid tei or msn
ctl received a message from an impossible source (i.e. one that shouldn't send
this type of message.
ctl received L3 Error from an office terminal
ctl received an unexpected timeout message
ctl: terminal state or type is wrong
ctl received message with an invalid address for an add-on module
ctl received a "My Equipment Id Is" message with an unknown equipment id
ctl received an unrecognised stimulus (from AD2)
ctl received a message for a terminal in the wrong state
ctl received a message for an unknown port
Problem with terminal database
the start of a terminal failed
unrecognised terminal types
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
10059 tp
10060 tp
10061 tp
10062 tp
10063
10064
10065
10066
10067
10068
10069
10070
10071
10072
10073
10076
10077
10078
10079
10080
10081
10082
10083
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10084
10086
10087
10088
10092
10093
tp
tp
tp
tp
tp
tp
10094 tp
10095
10096
10097
10098
10099
10100
10101
10102
10103
10104
10105
10106
10107
10109
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10110
10111
10112
10113
tp
tp
tp
tp
stop of terminal failed
The signalcopier could not copy the message, because there was no copy order
for the signal or no memory avialable for the copy.
The xerox signal handler of the agent received a signal with a wrong minor.
There was a missfunction in the ring buffer controling the output to the pocket
adapter. The ring buffer is maybe full or a put back was called in an ivalid state of
the ring buffer (Only allowed after a get).
There was an error in the ring handling of rc or td. This error is raised up on
wrong data passed from the caller.
The device is in an unexpected state
The device is in an unexpected state
The device is in an unexpected state
The device is in an unexpected state
The device is in an unexpected state
The device is in an unexpected state
The device is in an unexpected state
Expected a Pocket Adapter terminal type
Unexpected Datalinks signal
Tried to connect a socket id that is already connected
Tried to disconnect a socket that is not connected
Too much data for this stimulus
Impossible switch setting
Invalid linkId value
Invalid linkId value
Invalid combination of switch settings on the Pocket Adapter
Invalid linkId value
The V24 line is not flow controlled. You must modifythe PA switches to flow
control the line otherwise its likely that data will be lost
Wrong write index in ObjectArray.
Wrong read index in ObjectArray.
this state isn't in case.
An Interface function routes an unknown signal
Invalid value of device table index
ExchangeInfo received with different destinations. Cannot be handled for perf.
reasons.
Call of tpmmpDetach That means an HS doesn't answer to a page message
Parameters: termId and locStatus
atpc1 error
Unsuccessfull DevRegisterResp
devP == NULL
User tried to plug in a "cheap" terminal type
bckup error
Ctl received a TgCpStatus messages with a channel state it can't handle.
A DECT systembase is missing at the startup
This tc_state isn't in case.
Language not found
report the activity of the defined SB
In this tp-state you can't receive flash or impulse-digit.
default error for line objects handling.
This error is generated, if the feature state (for a specific subscriber) is not found
Invalid DpTimeoutEnu.
Error Mapping TpTbxMenuEnuC to MaTbxMenuEnuC - undefined value
TTgMmIdleReq received for non-existing CPE instance.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
10157 tp
TTgMmSig received in wrong component (received in SysCompCtl)
Ignore mmp signal for non-existing terminal
Something is wrong in the CTI server Atpc3.
The event handler in the cti cpe has a problem
command handler of cti cpe
Can't send message to DPS, as the process doesn't exist.
Can't send message to MMP as the process does not exist.
for BOARD_STAR the maximum of groups is limited to 18
there's a problem with subs-port conversion tabel le
Vibramode not found
we shouldn't have this hw version here
Wrong TermId.
Terminal type is wrong or unknown
The subscriberId is wrong
List type error (Note or Redial or CallList or AnsweredList, or CARD
Key error (wrong location or position
No object found in DB with the specific subsId
The CTI link is broken unexpectedly
Error All cards or All CallInformation are gone on the system
Invalid display in display list
Display not found in display list
Config terminal state -> attempt to move cursor to line that does not exist
Display list contains a null pointer where a valid display was expected.
A command is not understood in ATAS.
A command is not understood by ATNS (agent).
NULL iterator encountered when erasing state related symbols.
Invalid or null display group or element in display object list.
Attempt to deallocate a call reference which is not in the CPC pool
Port incorrectly configured
Soho: This errorid is for the all file the same. The last paramter is the
numbering.
Unhandled internal response.
Subscriber has been deleted, the teamkey prs ess won't be executed
Tried to access an entry in an empty alpha dial result.
Unexpected result from an async. alpha search.
Nullpointer received from DL.
A signal received in TpBkgProcC could no be handled.
The data pointer was null when a valid one was expected
Unknown message command received in tpBkgProc
The Alarm Queue is full, or we've received an alarm with the same id already
dect link breakdown
Trying to allocate a call ref for an invalid or undef port
There is no call ref pool for this port
Too many DTMF digits received. The digits which are over the limit are
truncated.
During the capitilisation of the search pattern, the length of the pattern has
exceeded the length of the found name. This is probably due to asnchronous
searches being delayed. The length of the pattern and the length of the name are
given in error report
10158
10159
10160
10161
10162
myEndEntry is outside the size of the myEntries container. The First parameter
shows myEndEntry, the second myEndEntries.size(). Ref BR 28578.
Alarm: ATAS link has failed because ATAS hearbeat stops.
Alarm: CTI link has failed because APTC3 hearbeat stops.
ctiApplInit: PeerTermId not unique or not defined.
tpDesDirProc: a case when a signal received is not treated.
10114
10115
10116
10117
10118
10119
10120
10121
10122
10123
10124
10125
10126
10127
10128
10129
10130
10131
10132
10133
10134
10135
10136
10137
10138
10139
10140
10141
10142
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10143
10144
10145
10146
10147
10148
10149
10150
10151
10152
10153
10154
10155
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
tp
10156 tp
tp
tp
tp
tp
tp
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
10163
10164
10165
10166
tp
tp
tp
tp
10167
10168
10169
10170
tp
tp
tp
tp
10171
10172
10173
10174
tp
tp
tp
tp
ATNS: A case is not treated, ignored or maybe not implemented.
default error id for tpctlstart.cc
addTerm -> No physical terminal present (CTI)
Alarm: CTI link reestablished - 1st party CTI link reestablished.
Alarm: CTI link has failed because APTC3 hearbeat stops. 3rd party CTI link has
failed.
Alarm: CTI link reestablished. 3rd party CTI link reestablished.
Alarm: ATAS link reestablished.
TwinComfort remove, get the pc-chain to know who delete it.
DTMF transmitter request failed. Parameter 1 with value 0: signal timeout, with
value 1: no transmitters available. Parameter 2 and 3: always 0.
Only CTL process is allowed to initialise the logging system.
Only CTL process is allowed to create the logging appenders
Saving syslog data into database failed.
10188 tp
Forwarded logging event from Tp-Logging system. See parameters for details.
on real target only:
TpAam = 0,
TpAamPrg,
D3Ad2,
TpCpe,
TpTap,
TpCtl,
Tp5xi,
TpSip,
Tm5xi,
TpMcx,
DpNw
Unknown symbol. Parm1: id of the unknown symbol (TmAam::SymbolIdC)
Unknown symbol state. Param1: id of the unknwon state
(TmAam::SymbolC::StateC)
Unknown icon. Param1: id of the unknown icon (TmAam::SymbolIdC)
A signal was received for a terminal, but the terminal instance (cpeP) was null.
This indicates that the terminal has either already been deleted - e.g.
TermStopReq was received twice, or that there was some error on startup.
Parameter 1 is the minor of t
We missed the response signal of RM resource reservation. It seems that the
timeout of osOseReceiveSigTmo function is too short. The reservation of this RM
resource is freed again if the reservation was successful. Param 1:
RmResourceTypeEnu; Param 2: 0 =
Unknown signal major in TpAnaProcC::handleSig(). Param 1: Signal
major/minor. Param 2 & 3: First 8 bytes of the signal content.
Common error code in this file. The error locations are numbered in parameter
1.
Unanswered, Redial and Answered are possible... Undef is not possible, there is
a problem.
User Routing doesn't exist, impossible to activate it!!!
Subscriber commands are received by the server where no "cs 3ok" or "cs 3nok"
command is received in advance.
Start-up of terminal failed, because of wrong or missing response from xa
Login of a freeseater, problem during the creation of the association!!!
TerminalStartIndication received from Ia for a terminal type which must no be
instantiated in tp.
12001
12002
12003
12004
12005
12006
12007
12008
12009
12010
12011
12012
Process received a message with a Major Number not previewed for this service.
Received not allowed message in Idle State.
not previewed case in sending out a message
Invalid portref or bcsRef given
Unexpected signal Major in l3MuxProc_
Unexpected signal Minor in l3MuxProc_
Invalid Bcs Ref for updating key word
Unknown flag parameter for updating key word
Invalid Bcs Ref for reading key word
Unknown flag parameter for reading key word
No pointer to signal for l3_fill_in_head
Invalid bcsref and/or portref for l3_fill_in_head
10175 tp
10176 tp
10177 tp
10178 tp
10179 tp
10180 tp
10181 tp
10182 tp
10183 tp
10184 tp
10185 tp
10186 tp
10187 tp
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
Attempt to modify a non 1Tr6 message
12013
12014
12015
12016
12017
12018
12019
12020
12021
12022
12023
12024
12025
12026
12027
12028
12029
12030
12031
12032
12033
12034
12035
12036
12037
12038
12039
12040
12041
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12042
12043
12044
12045
12046
12047
12048
12049
12050
12051
12052
12053
12055
12056
12057
12058
12059
12060
12061
12062
12063
12064
12065
12066
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
CC receives a CipherCfm in wrong state
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
S3 comment:
Default l3mcd error (multiple use)
Mandatory info-element is missing
Invalid call reference
Unrecognized info-element
Mandatory or optional info-element content error
Content error in a info-element (that isn't really a ie content error but a ie content
not handled)
L3 expired without correct timeout server handling
During starting a new L3 timer an old pending timeout was detected
During starting a new L3 cc_2_timer an old pending timeout was detected
scioh refused login request to mail_io process
received a ServiceLogout instead of a ServiceDataAck from scioh
scioh refused login request
received a ServiceLogout instead of a ServiceDataAck from scioh
Unexpected info-element in a message
Error has been detected in the decomposition of a L3 message
Signal allocation error
Invalid message
Invalid/Unexpected signal
Invalid RElease Detection value
System base power check no ok
System base synchronisation (B channels) not ok
System base in invalide state
System base status information after a system base reset.
Unexpected timeout type for system base
Error when performing software download to system base
unkown majormod.
to catch the gsHall error in the errorhandler
Alarm: Mail System: V24 Faulty
Alarm: Mail Server Faulty
12067 l3
an infoelement fount with a to long infoelement length (longer than the message)
Unexpected signal Minor in l3MuxProc_ down stream
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12068 l3
12069 l3
12070 l3
Alarm: ACT System base error
ReleaseReq received in state 31, but not as UserCC
Non treated Msg received in L3-state 31
12071
12072
12073
12074
12075
12076
12078
12079
12080
12081
12082
12083
12084
12085
12086
12087
12088
12090
12091
12092
12093
12094
12095
12096
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12097
12098
12099
12100
12101
12102
12103
12104
12105
12106
12107
12108
12109
12110
12111
12112
12113
12114
12115
12117
12118
12119
12120
12121
12122
12123
12124
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
This is the system alarm errorid for the no response from trunk alarm message
Outgoing call rejected alarm.
Alarm: No response from network
Alarm: No response from network (analog trunks)
PSA switched on or off -> see parameter 1 (80=on 82=off)
unexpected interface type
downstream msg: invalid portref
This minor isn't in case.
bcsRefAppend: invalid portref or bcsref
not supported userRate for V.110 connection received
l3MuxTransMsg: invalid protocol discriminator
DlReleaseReq: invalid portref
DlEstablishReq: invalid portref
mt2TransMToL3Mux: invalid portref
attempt to establish V.110 connection with a not supported baudrate
trans_m_to_l3_mt2 : invalid portref
bcsRefAppend: could not allocate bcsRef bloc
CC state 0: unhandled message
ReleaseInd: enpoint don't match.
trans_sig_to_cc_mux: invalid bcsRef
ModInfoReq received in state 3 (call proceeding) for UserCC
L3CC: unexpected signal received in state 19
invalid BcsRef
no transaction found
hanging connection on ACT radio-unit and the wisher on the RU has hit. reset
the RU
Warning generated in order to find LC03 timer problem on S3 code
Undefined CallControl in state 0
Undefined CallControl in state 1
Undefined CallControl in state 2
Undefined CallControl in state 3
Undefined CollControl in state 4
undefined CallControl in state 6
undefined CallControl in state 7
undefined CallControl in state 8
undefined CallControl in state 9
undefined CallControl in state 10
undefined CallControl in state 11
undefined CallControl in state 12
undefined CallControl in state 19
undefined CallControl in state 20
undefined CallControl in state 21
undefined CallControl in state 22
undefined CallControl in state 25
Wrong message for Modino-Timeout in state 1
Wrong message for Modino-Timeout in state 2
Wrong message for Modino-Timeout in state 3
Wrong message for Modino-Timeout in state 4
Wrong message for Modino-Timeout in state 6
Wrong message for Modino-Timeout in state 7
Wrong message for Modino-Timeout in state 8
Wrong message for Modino-Timeout in state 9
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12125
12126
12127
12128
12129
12130
12131
12132
12133
12134
12135
12137
12138
12139
12140
12141
12142
12143
12144
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12145
12146
12147
12148
12149
12150
12151
12152
12153
12154
12156
12157
12158
12159
12160
12161
12162
12163
12164
12165
12166
12167
12168
12169
12170
12171
12172
12173
12174
12175
12176
12177
12178
12179
12180
12181
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
Wrong message for Modino-Timeout in state 10
Wrong message for Modino-Timeout in state 11
Wrong message for Modino-Timeout in state 12
Wrong message for Modino-Timeout in state 19
Wrong message for Modino-Timeout in state 20
Wrong message for Modino-Timeout in state 21
Wrong message for Modino-Timeout in state 22
Wrong message for Modino-Timeout in state 25
Undefined CallControl used
Message to send is too long
Message transmitted to TE that should never been sended
Wrong message for Modino-Timeout
Undefined CallControl in state rest 2 restart
Wrong message for Modino-Timeout
Undefined port to return the TEI value
BcsRef not found
unvalid port referenc
message for layer 3 is out of range
Undefined protocol used
A dect systembase was removed from the LPI (cable pulled) or the system base
died
No free CallControl for starting a Setup
No free CallControl for staring a indiv. Cc in state 7
No free CallControl for staring a indiv. Cc in state 8
No free CallControl for staring a indiv. Cc in state 9
No free CallControl for staring a indiv. Cc in state 22
No free CallControl for staring an indiv. Cc
No valid bcs reference available
Unknown protocol discriminator
layer 3 info is smaller than 2 bytes
Signal without a message in state 0
Wrong CallControl in state 0
Wrong CallControl in state 1
Non treated message in state 1
Non treated message in state 2
Wrong CallControl in state 2
Wrong CallControl in state 3
Non treated message in state 3
Non treated message in state 4
Wrong CallControl in state 4
Wrong CallControl in state 6
Non treated message in state 6
Non treated message in state 7
Wrong CallControl in state 7
Wrong CallControl in state 8
Non treated message in state 8
Non treated message in state 9
Wrong CallControl in state 9
Wrong CallControl in state 10
Non treated message in state 10
Non treated message in state 11
Wrong CallControl in state 11
Wrong CallControl in state 12
Non treated message in state 12
Non treated message in state 19
Wrong CallControl in state 19
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12182
12183
12184
12185
12186
12187
12188
12189
12190
12191
12192
12193
12194
12195
12196
12197
12198
12200
12201
12202
12203
12204
12205
12209
12211
12213
12214
12215
12216
12217
12218
12219
12220
12221
12222
12223
12224
12225
12226
12227
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12228
12229
12230
12231
12232
12233
12234
12235
12236
12237
12238
12239
12240
12241
12242
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
Wrong CallControl in state 20
Non treated message in state 20
Non treated message in state 21
Non treated message in state 22
Non treated message in state 25
Undefined CallControl
Non treated message in state rest2
Non treated message in state tr1
Undefined CallControl used
L3CcTimer already expired
StateIndex out of state-table range
SignalIndex out of state-table range
Function not in state-table
Signal is neither MajorMod nor MajorL3
Undefined Major-Signal
Undefined Minor-Signal
ErrorIndex out of range
TransactionPointer shows to no transaction
Unused callcontrol timer expired in state 1
Unused callcontrol timer expired in state 2
Unused callcontrol timer expired in state 3
Unused callcontrol timer expired in state 4
Unused callcontrol timer expired in state 6
Unused callcontrol timer expired in state 10
Unused callcontrol timer expired in state 12
Unused callcontrol timer expired in state 20
Unused callcontrol timer expired in state 21
Unused callcontrol timer expired in state 22
Unused callcontrol timer expired in state 25
Unused callcontrol timer expired in state 31
Unused callcontrol timer expired in state 11
Unused callcontrol timer expired in state 50
Unused callcontrol timer expired in state 62
Unused callcontrol timer expired in state 7 or 77
Unused callcontrol timer expired in state 8 or 78
Unused callcontrol timer expired in state 9 or 79
Unused callcontrol timer expired in state 19 or 89
Invalid Bcs Ref for reading key word
HW param of the system base is not valid
No response from scioh proc to service message from l3mailio proc
received watchdog signal when ServiceLoginConf or ServiceLogout expected in
mailIoOpenPipe
Unexpected minor signal in MajorService in mailProc
Received timeout when LoginConf or Logout signal was expected.
Received timeout when DataAck or Logout expected.
RFPI params are fault
Broadcast Attributes are fault
Could not start watchdog supervision for the process l3hdlcproc
could not register the hdlc device with datalinks
The l3hdlcproc was in the wrong state
The channels requested were not contiguous, error in l3hdlc or datalinks
An incorrect signal was received
Could not allocate a channel for use
Connecting over a primary interface and don't know how to proceed yet.
could not get the next call reference
Could not extract the b channel from the received signal
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12243 l3
12244 l3
12245 l3
12246
12247
12248
12249
12250
12251
12252
12253
12254
12255
12256
12257
12258
12259
12260
12261
12262
12263
12264
12265
12266
12267
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12268
12269
12270
12271
12272
12273
12274
12275
l3
l3
l3
l3
l3
l3
l3
l3
12276
12277
12278
12279
12280
12281
l3
l3
l3
l3
l3
l3
12282
12283
12284
12285
l3
l3
l3
l3
12286 l3
12287 l3
12288 l3
Attempt to start an invalid timer ,.
Attempt to stop an invalid timer
Attempt to stop a timer which isn't running
A buffer received from the hd proc had to be trown away. This is because there
is no flow control in the hd and obviosely the performance of the system is not
good enough.
could not start watchdog supervision on the router process.
An invalid MSN was received for the TA
The wrong TEI was recieved
An invalid l3 message was received.
AD2DLErrorUnexpSig.
AD2DLErrorUnexpTimeout
AD2DLErrorDownload
AD2DLErrorHWParam
AD2DLErrorPowerNotOk
Invalid portref in state 10 when message Hold Response received
Invalid portref in state 10 when message Retrieve Response received.
Invalid Bcs Ref for reading key word
unknown HoldAuxiliary State
Wrong state machine with auxiliaryState.
ErrorTermState.
ErrorUnexpSig
UnexpTimeout
HWParamNotOk
wrong cc type .
Error of Layer 3 message with l3CcSt10HoldReq. Message comes from the
wrong side.
Error for incoming request message from layer 3 in l3CcSt10RetrieveReq.
Error in Timer for Hold in layer 3: l3CcSt10ModTmoTHold.
Error in timer signal for Hold in l3CcSt10ModTmoTHold /
Error in L3 timer l3CcSt10TmoTRetrieve.
Error in the portref origin from the Timer. in l3CcSt10TmoTRetrieve
wrong cc type
Error Mapping L3TbxMenuEnuC to MaTbxMenuEnuC - undefined value
No more DectSystemBaseId available in the default location area 0. A port reset
will be performed. No DectSystemBase object has been created. To solve this
problem the installer has to delete a system base in locarea 0 which is not
operational, or he creat
failed to map l3MonTestFlagEnu to XaMonTestFlagEnu
could not convert portref to port
could not translate portref to analogport
AMx process received a signal with unknown minor of MajorMod
AMx process received a signal with a not treated Major
finding next Info Element in a L3 message failed becaus pointer to messagULL
CsyMxProc received signal with not treated minor of MajorMod
csyMxProc received signal with not treated Major
An error occured in the l3 call control of analog subscribers or trunks
The Transaction found for this BCS Ref is in state 0 (NullSt). That should never
happen because Transactions in state 0 have to be deleted before handling the
next signal. This Transaction migth not be initialised correctly.
An attribute of the system bases or dect network has been changed, and the
system bases need to be reset.
unknown MT2 message received in l3mt2proces
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12289 l3
12290 l3
12291 l3
12292 l3
12293 l3
12294 l3
12295 l3
12296 l3
12297
12298
12299
12300
12301
12302
12303
l3
l3
l3
l3
l3
l3
l3
12304 l3
12305 l3
12306 l3
12307 l3
12308
12309
12310
12311
12312
12313
12314
12315
12316
12317
12318
12319
12320
12321
12322
12323
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
l3
12324 l3
12325 l3
12326 l3
12327 l3
Invalid BCS ref: BCS ref is no more allocated in ArPool
Invalid BCS ref: This BCS ref is no more allocated in the AR Pool
Untreated message while Transaction was in NullActive State
Datalinks did not provide a telephone number for the outgoing HDLC TA call.
Call aborted.
In St10 (QSIG) someone started a timer which is not allowed.
During initialization of CallRefs we found a port where the portRef is set to Undef.
Param1 is the boardId, param2 is the relPortNr. SM seems to have a serious
problem.
StatusReq received for NetCC or QSigCC in state param1
StatusReq received for unknown CC-type in state param1
ISDN L3 received a Signal with the Major "ConfChangeAnnounceCard" but the
Minor of the signal is not handled. The received minor is copied to Param1.
L2 link could not be set
Invalid TEI in Keyword.
function l3AllSetL2Link: Invalid BcsRef has been found
Invalid BcsRef as param in function l3MuxCheckIfBcsRefEntryExist
This portreference is unknown.
Unexpected signal received.
We set the portRef to NULL because of the bcsRef didn't match an entry in the
BcsRef table.
Error detected in SMS TL: Illegal state, unexpected signal or pointer to message
is lost parameter 0: state parameter 1: major/minor parameter 2: 0 (normal)
or 1 (pointer to message is lost)
This error report is used to check if the L3/L2 state machine behaves correct.
strange string from AVS received
Couldn't open channel to retrieve voice messages and greetings from the
Voicemail module
Strange "MailWaiting" string from AVS received
Strange "MailToRemove" string from AVS received
Strange "MailDeleted" string from AVS received
Strange "MailGreetingState" string from AVS received
Strange "MailRecGreetingStopped" string from AVS received
Strange "MailPlayGreetingStopped" string from AVS received
Strange "MailPlayMsgStopped" string received
Strange "MailPassword" string from AVS received
Unknown message type from AVS received
Invalid primitive
Invalid Major received
Invalid Minor for MajorAvsVm received
Could not send a signal to the AVS via HDLC-channel 0x03
The AVS did not send any response on HDLC-channel )x03
Received message is too long or corrupted
Unknown MT2 protocol code received for analog subscriber. Param 1: PortRef,
Param 2: MT2 code, Param 3: mt2_index
Unknown MT2 protocol code received for analog trunk. Param 1: PortRef,
Param 2: MT2 code, Param 3: mt2_index
Sending a trunk configuration signal to an analogue trunk port is impossible
because building the packet failed. Param 1: Port reference Param 2: Locale ID
Param 3: Info length in the signal buffer
Sending a trunk configuration signal to an analogue trunk port is impossible
because building the packet failed. Param 1: Port reference Param 2: Trunk ID
Param 3: Info length in the signal buffer
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
12328 l3
12329 l3
12330 l3
12331 l3
12332 l3
12333 l3
12334 l3
12335
14001
14002
14003
14004
14005
14006
14007
14009
14010
14011
14012
14013
14014
14015
14016
14017
14018
14019
14020
14021
14022
14023
14024
14025
14026
14027
14028
14029
14030
14031
14032
14033
l3
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
14034 l2
14035 l2
14036 l2
14037 l2
Sending a trunk configuration signal to an analogue trunk port is impossible
because building the packet failed. Param 1: Port reference Param 2: Locale ID
Param 3: Info length in the signal buffer
The facility containing ArTypFacInfoHdlcPeerC information was not found in the
message. The HDLC information cache could not be updated. Param 1:
Message type (l3alldef.hh)
The analogue port range is limited to UInt8 (0..255). This range has been
exceeded. Param 1: Actual port number value Param 2: 0 Param 3: Error
location
A facilityInfo infoElement has been found but could not be deleted
A facilityInfo infoElement has been found but could not be deleted
The Collect Call Blocking OIM object PrAnalogDoubleAnswerConfig OIM doesn't
exist. Param 1: LocaleId.
Inactivity event was not handled.
memcpy_s failure The data could not be copied properly. p1: error code of
memcpy_s p2: target data length p3: source data length
wrong Major/Minor received P: Major, Minor, state
problem with DataAck P: state, nr of Data to ack
Signal supplied contains more data chars than buffer allows
l2RbcP == NULL, at l2RbcStartSyb or l2RbcStopSyb
l2RbcDeassignSecondReq: Wrong port- or chan-Nr
message received from prx ignored because it is too large.
Strange behaviour, possibly repeated ConnInds received
Incorrect message received.
Unknown primitive, function l2SapAppend_sp2.
Unknown interface; function l2SapAppend_sp2.
Unknown primitive.
Unknown port interface.
Unknown port interface.
Unknown port interface.
Invalid SAPI.
Broadcast or undefined Interface type
Broadcast or undefined Interface type
Broadcast or undefined Interface type
Broadcast or undefined Interface type
Unknown primitive
Invalid Message
Invalid SAPI
Invalid SAPI
Error has been detected in component Cpt
A Timeslot was found that was not switched off. Now do switch it high-z
Handset ConnInd message ignorred/discarded
A search of the RBC tables has failed to find any records with the used keys
Mute called for DECT HS without B-channel
Deassignment of DECT HS B-channels while there were none
DECT handover 'switch' while just one B-channel was allocated
B-channel exists while linkdown (release handshaking problem)
The type of I frame was not regonized in a ConnInd message
a DECT link is released while there's still a B-channel allocated this B-channel is
now forced to be released from l2
supplementary info for error 14014: binary content of firts 12 bytes of inSigP>message
Data from the PA has been disgarded because the PBX is too slow to process
V24 data at this rate. Check the PA switches 4 and 5. Either H/W (CTS) or S/W
(Xon/Xoff) flow control must be enabled.
parameter out of range
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
14038
14039
14040
14041
14042
14043
l2
l2
l2
l2
l2
l2
14044 l2
14045 l2
14046
14047
14048
14049
14050
14051
14052
14053
14054
14055
14056
14057
14058
14059
14060
14061
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
14062
14063
14064
14065
14066
14067
14068
14069
14070
14072
14074
14075
14076
14077
14078
14079
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
l2
14080 l2
14081 l2
14082 l2
14083 l2
TA data connection (SSA) disconnected although not all datas physically
transmitted!
wrong minor received
untreated major received
unexpected layer2 config command received
unexpected l2b message received
command not expected at this type of port
The PRIMA transmit queue is not consistent or the queue quota is at the limit. If
the compiler flag DEBUGPRX is set, the queue is checked after every change.
Param 1: value 1 Param 2: value 2 Param 3: Error case (0..11), see source
code.
Unknown interrupt status
Multiple interrupts of the same prima in progress. Question: Has this ever
happened?
Unknown signal received
NULL pointer received
Transmit buffer error
Unknown state during initialisation of prima
Unknown threshhold of prima
Invalid step by checking the states of the P-ports
Invalid state by reinitialising a P-port
ForceLinkDown called to clear link as 12 ConnInds failed.
In the function PrxChanIdPrx, No Prima found in configuration
Could not start watchdog supervision for l2hdlcproc
The received signal contains an invalid channel
The process was in the wrong state
An attempt was made to get the channel from the wrong signal
The wrong signal was received
An attempt was made to send an incorrect signal
Upstream: A buffer received from the hd proc had to be trown away. This is
because there is no flow control in the hd and obviosely the performance of the
system is not good enough. Downstream: A buffer received froom l3 proc had to
be trown away, this is
Log for B Channel unavailable for Dect system Base.
Error Mapping L2TbxMenuEnuC to MaTbxMenuEnuC - undefined value
wrong parameter tei passed to f.
wrong major passed to the function
could not translate between portref and absolute port nr
end of buffer overwritten
param of signal out of range
A message was not sent completely, will be sent again.
The port doesn't exist and/or datalength too long.
No socket found. Perhaps wrong socket id.
SlotId and LocationId are not equal.
Port exceeded range of Isdn ports.
Port exceeded range of ISDN ports.
l2prxmon was not able to print its data.
LinkHandler failed to send request/signal to nodeId specified in param1.
could not convert portRef to isdn data structure. given portRef is not an isdn port
it need to be for this command.
The given port is not an Ad2 port.
could not find link with given tei (assert replaced by errorReport) (this could
happen in havy loaded systems where lot of layer2 link timeouts happen)
The port reference is not valid.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
14084 l2
14085
14086
14087
14088
14089
14090
l2
l2
l2
l2
l2
l2
14091 l2
14092 l2
14093 l2
14094 l2
14095 l2
14096 l2
14097 l2
14098 l2
14099 l2
14100 l2
14101 l2
14102 l2
14103 l2
14104 l2
14105 l2
14106 l2
14107 l2
14108 l2
14109 l2
Error detected in SMS PHL: Illegal state, unexpected signal or pointer to
message is lost parameter 0: state parameter 1: major/minor parameter 2:
0 (normal) or 1 (pointer to message is lost)
Error detected in SMS DLL: Illegal state, unexpected signal or pointer to
message is lost parameter 0: state parameter 1: major/minor parameter 2:
0 (normal) or 1 (pointer to message is lost)
portref in signal is not an ISDN port.
error: no valid timeslot and highway for the fsk sender and receiver
Unknown Major received
Link handler could not send a signal
Failed to send signal to master. Param1: Major, Param2: Minor
Although L2Prxi handshake to the D3 domain signalled stop, the PRIMA sending
queue is flooded with messages to send. The stop level is 6 messages, in the
queue are more than 100 messages. Please address questions regarding this
error code to the Terminals
Tracking for br40029. l2PrxTimerProc supervises errMagic. In case errMagic in
maerrcont.cc gets overwritten, the PBX crashes. Parameter 1: value of corrupted
errMagic. Parameter 2: Address of Variable errMagic
The server can't attach/detach the client. Param 3: 0 = The server can't attach
the client.
1 = The server can't detach the client. Param 1: myObserver.
Param 3: Major of Signal.
Analogue modem: We should never receive this signal type in this state! Param
1: Signal type. Param 2: state. Param 3: Error numeration.
Unexpected state of the analogue remote access (analog mode) process.
Param 3: Error numeration. Param 1 and 2: depending on error number (param
3). See code.
Unexpected message in this state: TxMessageSent although myTxBusy = false
param 0 = SysPortId param 1 = SysChanId param 2 = L2PortStateEnu
Transmit queue overflow param 0 = SysPortId param 1 = SysChanId
param 2 = 0
Port generated too many interrupts param 0 = SysPortId param 1 =
SysChanId param 2 = L2PortStateEnu
Unknown parameter received param 0 = SysPortId param 1 = SysChanId
param 2 = L2PortStateEnu: Unknown!
primaInit queue overflow param 0 = inSlotId
Signal received for channel that was not created param 0 = SysPortId
param 1 = SysChanId param 2 = MinorOf(sigP->sig)
Unknown signal received param 1: MajorOf param 2: MinorOf param 3: 0
l2PrxDectSyncConnSybSync, l2PrxDectSyncDiscSybSync: Could not translate
between portref and absolute port nr param 1: SmPortReferenceC portRef
param 2: SmPortReferenceC ifType param 3: 0:ifType!=Office,
1:absPort==Undef.
Couldn't send signal to L2PrxManProc/L2DsiManProc param 1; MajorOf param
2: MinorOf param 3: 0
Unknown Minor received param 1: MinorOf(sigP->sig)
Failed to send signal to L2DsiManProc param 1: Major param 2: Minor
Illegal portId received (>= ArCfgConPrimaPortNbrMax). Parameter 1: Major
Parameter 2: Minor Parameter 3: portId
Illegal portRef received: getAd2FromAbs(portref) returns illegal portId (>=
ArCfgConPrimaPortNbrMax). Error detected in getRefToPortP(inPortref),
called from: getRefToChannelP(inSigP->common.portref, inSigP>common.chanId); called at receiving TgAd2Sen
Illegal channelId (>= OurNumOfChannels). Detected in function
getDsiChannelP(SysChanId inChanId). Parameter 1: MyPortref Parameter 2:
MyPortId Parameter 3: inChanId
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16001
16002
16003
16007
16008
16009
16013
16015
16016
16017
16018
16020
16021
16022
16023
16024
16025
16026
16027
16028
16029
16030
16031
16032
16033
16034
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16035 hd
16036 hd
16037 hd
16038 hd
16039 hd
16040 hd
16041 hd
16042 hd
16043 hd
16044 hd
16045 hd
16046 hd
16047
16048
16050
16051
hd
hd
hd
hd
Unknown bio scan job to start or stop
A bio scan service is started several times
Attempt to stop a bio scan job by a not authorised proc.
Unknown Major or Minor in Bio scan answer.
Possible mismatch in the organisation of the LED pattern lists.
Impossible LED nr, blink code or missmatch in pattern list
No several special conditions possible in LED blink process
empty message to SSA P: Minor, length
Wrong door number in the signal received with an OseReceiveAll().
unespected Minor in MajorMod case.
unespected door value.
Unexpected parameter value to switch or read the selected device. Ignored.
Unexpected V24Channel. Ignored.
Parameter value not allowed. Ignored.
no RTS/CTS supported for this v24 channel.
The courtesy was not correctly stopped after a play- or record command.
This textnumber is not defined. Play- or Reccommand ignored.
Unknown signal Major for Hd Pgp main process received
Unknown Minor for timeout for Hd Pgp main process received
Impossible LED nr for stopping the LED blinking
Unkown LED to toggle for board bcs8
Unknown signal Minor with Major MajorPgp in hdPgpMainProc
Unknown signal Minor with Major MajorPgpSwitch in hdPgpMainProc
A wrong board is inserted on left slot, ATTENTION : the power doesn't come
ROM Checksum failed
RAM Test failed
Checksum on last EPROM: The number of EPROM's is not identically with the
programm think he have (see file hdhwmemadr.h) or the not available indicator (1) is not set. See also document tool-0013, Checksum Calculation Tool
Unknown MUP HW coding for platform bcs8
The busy wait in hdTestAndSetFLG() does not want to wait forever. There must
be a real big problem, that causes the CPM-RISC not to reset the FLG bit in the
command register `CR'. This FLG should be 0, so that a new command could be
entered. Currently I th
The hdCpmIssueRiscCommand() failed. This is due to a bad combination of
<opCode,channel>. Reread the MC68360 USER MANUAL p.7-6 table 7-1 on
valid combinations of the two.
Unexpected V24Channel --> coding error, ZEE supports V24ChA only!
The baud rate (rxBaud|txBaud) is wrong, unknown enum. Probably overwritten.
bitFormat of v24Config contains garbage. Probably overwritten by some bad
pointer manipulations.
parityBit of v24Config contains garbage. Probably overwritten by some bad
pointer manipulations.
stopBit of v24Config contains garbage. Probably overwritten by some bad pointer
manipulations.
A character was received and discarded due to lack of buffers. Solution:
configure more BD for receiving.
A break character was received. And now?
Framing or Parity Error. Is this a Layer1 problem?
ZEE-internal error. CPU tried to issue a command to the Communications
Processor Module (CPM) and it failed.
An unknown Minor was sent from layer2
During transmission in i-channel an error occured
During reception in i-channel an error occured
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16052 hd
16054 hd
16055 hd
16056 hd
16057
16058
16059
16060
16061
16062
16063
16064
16065
16066
16067
16068
16069
16070
16071
16072
16073
16074
16075
16076
16077
16078
16079
16080
16081
16082
16083
16084
16085
16086
16087
16088
16089
16090
16091
16092
16093
16094
16095
16096
16097
16098
16099
16100
16101
16102
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
got invalid message from layer2
V24-Error: For some reason the READY-BIT in the status of the buffer
descriptor was not cleared even after an oseDelay(50).
If this problem
occures V24 needs more investigation.
the value for `stopbit' in v24Config (hdbvar) nor TwoStopBits. Structure
Overwritten?
the value for `parityBit' in v24Config (hdbvar) is none of
(NoParity,EvenParity,OddParity). Someone must have overwritten the structure
or did use an `int' to write the parityBit.
unknown baudrate value: someone must have updated the enum and forgot to
update the code! As you already know: <shit happens>.
writeBlock: byte can't be written
pollErase: erase failed
writeBlock: writeBlock failed
startSectorErase: erasing sector with locks, application may read garbage
stopSectorErase: sector couldn't be erased successfully
hdfldStartDevice: attempt to start illegal device
This dummy routine should not be called
Non-Existant register
Non-Existant module
Invalid port number for this module
sync-mux can't be set on LTD
Invalid module
Emergency mode not possible on LTD
Non-existant register
Invalid module
Non-Existant chip select
Invalid MAA type
Invalid port number
Invalid MAT type
Invalid port number
Invalid port number for first port of this module
Invalid LTA interrupt
Invalid LTA port number
Invalid module
Invalid tvaId
Invalid module type
Invalid module type
Invalid controller
Invalid module
Invalid module
This dummy routine should not be called
Signal should not have been received
Signal should not have been received
Invalid LTA board type
Invalid port number
Invalid DTMF decoder number
Invalid DTMF decoder number
Invalid connection state
Invalid line state
Invalid MAA port
Invalid base plate
Invalid module
Invalid module
Invalid module
Invalid module
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16103
16104
16105
16106
16107
16108
16109
16110
16111
16112
16113
16114
16115
16116
16117
16118
16119
16120
16121
16122
16123
16124
16125
16126
16127
16128
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16129 hd
16130 hd
16131 hd
16142
16152
16153
16154
16155
16156
16157
16158
16159
16160
16161
16162
16163
16164
16165
16166
16167
16168
16169
16170
16171
16172
16173
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
Invalid module/register
Invalid port number
Invalid port number
Invalid port number
Invalid port number
Invalid first port
Invalid port number
Invalid module/port combination
Invalid module/port combination
Invalid first port
Invalid module/port combination
Invalid register value
Invalid first port value
Invalid module/port combination
Invalid port value
You can't set EMERGENCY on an MDS
Invalid first port value
Invalid module/port combination
You can't set power on an MDT
Invalid port value
Invalid port value
You can't set EMERGENCY on an MDT
Invalid first port value
Invalid module
Invalid timer
Invalid timer
The read application size from APB (Application Parameter Block) in the
application Flash, is bigger than the physical Flash size
The checksum for a not existing Flash device should be buildt (check with enum
FlashSortType)
An unknown RAM device should be checked
open_buffer_ram has been called twice in a row (there should have been a
close_buffer_ram between them!!!). Look at the call stack to find out who caused
the trouble.
Unknown runstate for EPIC-test
I-Channel HSCX access-test failure
I-Channel HSCX send/receive-test channel B failure
I-Channel HSCX interrupt-test channel B failure
EPIC access-test failure
EPIC interrupt-test failure
IOM2-test failure
ISAC access-test failure
ISAC interrupt-test failure
ISAC: It is not possible to switch the ARLoop (ARL)
ISAC: It is not possible to activate layer 1
ACFA access-test failure
ACFA interrupt-test failure
HSCX access-test failure
HSCX interrupt-test failure
HSCX send/receive-test channel A failure
IOM2 port-test failure
S-Bus power-test failure
MAA port-test failure
The 5V power is not present
The 40V power is not present
The 48V power is present
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16174
16175
16176
16177
16178
16179
16180
16181
16182
16183
16184
16185
16186
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16187 hd
16188 hd
16189 hd
16190
16191
16193
16194
16195
16196
16197
16198
16199
16200
16201
16202
16203
16204
16205
16206
16207
16208
16209
16210
16211
16212
16213
16214
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16215
16216
16217
16218
16219
16220
16221
16222
hd
hd
hd
hd
hd
hd
hd
hd
16223 hd
Not possible to write in a register of the ZFK - chip
Not possible to write in a register of the MUSAC chip
Not possible to write in a register of the SYTAG chip
There isn't a SYTAG on board
Not possible to write in a register of the RTC chip
The RTC don't work's
The general call relais must be nr 4
Wrong relaisnumber (possible nr are 1,2 and 3)
The musicvolume is out of range (1..8)
There are only 8 inputswitch's on the ANSA ZEE
There is a wrong reset cause
The slotnumber for the PCmcia card's is wrong
There is a wrong slotnumber on the mup
A RAM or ROM device with a non valid address range is tested by selftest task
Power - Failure on linecard
Hardware timer of QCC has expired with unassigned function. Parameter 1:
Timer index (0..3) Parameter 2: 0 Parameter 3: 0
function has been called with wrong parameter or hdtmoserver is not able to
recover occured problem.
Port number too large for EAA04 (Range 0->3)
Port number too large for EAA04 (Range 0->3)
Port number too large for EAA04 (Range 0->3)
Port number too large for EAA04 (Range 0->3)
Invalid LineState for EAA04
Port number too large for EAA (Range 0->3)
Invalid connState requested for this port
FLASH EPROM failure
MFP-test failure
PRIMA-test failure
DTMF-LOOP failure
PCM-switch failure
an error using the chip driver has occured
Function not available (if there isn't a RESA)
function is called where no chip exists
Unexpected DSP message received
Dsp wrote a msg but HSR7 bit 3 not set in response
DSP not ready to receive msg
DSP msg length incorrect
MPD received bad interrupt signal
Msg recieved by dsp manager has bad major/minor
dtmf sender requested with unavailable sender number
Battery of SRAM card is empty
The read application size from BPB (Boot Parameter Block) in the application
Flash, is bigger than the physical Flash size
dtmf tone table is asked for an unexpected sign
System base 4 must be connected to an MPD module
ZFK-2 chip was synchronized
An error was detected by initialising the dsp.
Function call with an unknown state.
Sub-identification of mpd module is not defined.
Moule range is not possible.
ErrorId 16223 is used for any errors used in the drivers area of this file ie.
interrupt bits, HW-states, unexpected HW-events etc Parameter 0: unexpected
value Parameter 1: address the value has been read from (eg. register)
Parameter 2: last MajorMinor
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16224 hd
16225
16226
16227
16228
16229
16230
16231
16232
16233
16234
16235
16236
16237
16238
16239
16240
16241
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16242
16243
16244
16245
16246
16247
hd
hd
hd
hd
hd
hd
16248 hd
16249 hd
16250 hd
16251
16252
16253
16254
16255
16256
16257
hd
hd
hd
hd
hd
hd
hd
16258 hd
16259 hd
16260
16261
16262
16263
16264
hd
hd
hd
hd
hd
16265 hd
ErrorId 16224 is used for any errors used in the message handling area of this
file ie. format errors, MajorMinors problems, out-of-range values Parameter 0:
unexpected value Parameter 1: address the value has been read from (eg.
register) Parameter 2: l
ErrorId 16225 is used for any errors used in the service functions area of this file
ie. format errors, MajorMinors problems, out-of-range values etc Parameter 0:
unexpected value Parameter 1: address of the function the error has occurred in
Parameter 2
Dect sync is switched to the wrong timeslot
Dect bitshift value is wrong
access to MUSAC indirect register failed
CM memory of MUSAC could not be reseted
the timeslot was in use.
Attempt to initialize a wrong baudrate for the V.110 protocol
Attempt to start a nonexisting RISC timer
Attempt to stop a nonexisting RISC timer
Attempt to stop an already stopped RISC timer
Attempt to start an already started RISC timer
Attempt to initialize the RISC timer base while RISC timers are running
RISC timer period exceeds maximum value of 63
Attempt to start a RISC timer prior to initialize the RISC timer table
Attempt to start a RISC timer with a to large timeout
Attempt to start a RISC timer with a to short timeout
RISC timer could not be started for V.110 protocol. V.110 will not work !
RISC timer table could not be initialized for V.110 protocol. V.110 will not work!
unable to load V.110 Microcode into Dual Port RAM: not enough space
Comparison of the MADR register wrong. Fatal Error.
Comparison of the MAAR register wrong. Fatal Error.
comparison of the MACR register is wrong. Fatal error.
Port of TimeSlot out of range. Fatal Error.
Sp1 want to switch a connection from analog subscriber but the layer3 of that
subscriber is idle. Could be a OWA problem.
Stop-Bit Error during receiption of a V.110 frame (Motorola Microcode)
A character was received and discarded due to lack of buffers on a V.110 frame.
Invalid V.110 frame received. The character received until this error occured, are
valid.
function was called with wrong dtmf-number
epic access has failed due to epic internal occupation of memory
disabling, enabling or clearing of interrupt source which was not defined
disabling, enabling or clearing of interrupt source which was not defined
disabling, enabling or clearing of interrupt source which was not defined
function called with parameters out of range
just some bits of pcm timeslot are active. We never use that feature, so that
must be an error.
sombody tried to change a special function timeslot without disabling the function
first.
sombody tried to activate the output to iom, but iom is internally looped back
without any previous output to iom.
could not get info about iom timeslot of requested analog port
No ZFK tones defined for this country.
/* unexpected write access to Iom2 timeslot */
unexpected read of ci channel.
command-indication channel has detected a change interrupt has occured, but
no function assigned to treat the change
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16266 hd
16267 hd
16268
16269
16270
16271
16272
16273
16274
16275
16276
16277
16278
16279
16280
16281
16282
16283
16284
16285
16286
16287
16288
16289
16290
16291
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16292 hd
16293 hd
16294 hd
16295 hd
16296
16297
16298
16299
16300
16301
16302
16303
16304
16305
16306
16307
16308
16309
16310
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16311 hd
The checksum is not available.
incosistent handling of monitor fifo sendig sending
monitor queue is growing too much there seems to be a problem with sending
om monitor channel
unexpected major minor received
the requested module name is not known by epic-driver
function call with parameter out of range
function called with wrong parameter
configuration of isdn port 3 is undefined
unknown hw version detected
unknown module in ext slot
NULL pointer detected.
Unknown signal major for EXP14 signal interrupt entry (mod0).
Unknown signal major for EXP14 signal interrupt entry (mod1).
No interrupt handler for this module.
Unknown chip select for EXP14 module.
Unknown module number.
NULL pointer detected.
Synch port is not a T-trunk-line.
invalid V24 channel
unexpected signal
requested hardware address is not available
function's parameter out of range
out of country range.
Not all expected DSPs have initialised, possible hw problem
Bad OSP module type
Interrupt process woken up with null msg
The function hdLicGetDataBlock was called with an item-type that is not
supported. Check whether this type really exists in: ArLicLicenseItemsEnu if no
: -> you found a bug if yes: -> update the sw with the new type
For this country doesn't exist sicofi-coefficients. That means sits are Switzerland
values.
This Dtmf-digit doesn't exist.
This attenuation-switch doesn't exist.
the function hdLicGetDataBlock received a request to retrieve data from the
license chip for a unknown (or not yet implemented) datatype. Check whether
you mistyped something in the calling function or implement the new datatype in
the function hdLicGetDat
An error occured in the library interface functions (read,write)
accept only one dect assignement
unexpected type of interface
there was already a module assigned
assignement has exceeded the maximum port range
parameter port exceeded maximum port range of interface
module must be assigned first
assignement of interface failed
parameter primaId is out of range
function parameter exceeded allowed range
param eset port is out of range
function called with wrong parameter
error parameter : requested prima is not known
prima is not assigned or functions are init already
Unexpected V110Channel --> coding error, ZEE/MUP3 supports V110ChA only!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16312
16313
16314
16315
16316
16317
16318
hd
hd
hd
hd
hd
hd
hd
16319 hd
16320 hd
16321 hd
16322
16323
16324
16325
16326
16327
hd
hd
hd
hd
hd
hd
16328
16329
16330
16331
16332
16333
16334
16335
16336
16337
16338
16339
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16340
16341
16342
16343
16344
hd
hd
hd
hd
hd
16345 hd
16346 hd
16347
16348
16349
16350
16351
16352
16353
16354
16355
16356
16357
16358
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
The baud rate rxTxBaud for V110 protocol is wrong, unknown enum. Probably
overwritten.
Wrong flowcontrol value for V.110 protocol
Flash is unknown, add the device to the hardware driver table.
Cannot access the echo canceller database item.
Unexpected parameter value to switch or read the selected device. Ignored.
The slot parameter is not correct for the board
Unexpected minor for MajorMod in hdPgpMainProc received
Less data Flash found than required for this board (foundDevs, foundSize,
requiredSize).
kdm write access has been started with higher IPL than 0 !!
DSP returned an error message
During XOFF state in V.110, we had a frame lost situation. We definitely lost
datas.
unsuccessfull registration
Destroy license chip, only a read access is possible
No response from DSP within timeout, could be a faulty DSP.
Checksum error, problem with DSP code conversion from binary to C.
The V.110 transmit buffer is blocked over a too long time
A spurious interrupt occured. One known source for this problem is a read
access to the SSA register: V.24 Receive Register (read only, Adr 04h)
Invalid LED enumeration
Module has already been assigned a prima number
isdn port exceeded IsdnPortMax
undefined function pointer (NULL)
function call makes no sense at that type of hardware
configuration command not defined
installation problem detected
function pointer already defined !
connectIomToUp with unknown type of connection
object HdEpicInterruptC got asked for setup unknown iom channel type
iom2monfifo multiple timeouts started
V.110 receive buffer was indicating an interrupt althought no datas were
received. An old buffer is used, which contains wrong datas! The datas are not
sent to l2Ta.
os generates interrupt, but no signal available
interrupt handler gets overwritten
given parameter module unknown
unknown primary mode to setup
we have to make shure, the tones get not reset twice on a zee. Dect Sync Signal
would be wrong after a second initialisation
invalid V24 configuration
Wrong highway number help q quit dir ls errorid g -q -dhd hddspdrvstar.c cWrong
Checksum of download code for DSP is wrong
No timeslot has been assigned to this bchannel and portId
No portreference for this portId
internal error detected
process main loop unexpected signal received
parameter fault
parameter fault
unexpected acknowledge received
acknowledge pointer not within signal actually hold
vp message received with portnumber of uninstalled driver
consistency check failed on parameter
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16359
16360
16361
16362
16363
16364
16365
16366
16367
16368
16369
16370
16371
16372
16373
16374
16375
16376
16377
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16378
16379
16380
16381
16382
16383
16384
16385
16386
16387
16388
16389
16390
16391
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16392
16393
16394
16395
16396
16397
16398
16399
16400
16401
16402
16404
16405
16406
16407
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16408 hd
The microcode revision number read from the RISC, does not match the current
version for the V.110 microcode. The system is crashed!
new mode is not known
wring parameter passed to function
The wrong module was specified for an analog port
The codec is not responding
The wrong state was requests ed for the slic / .
An invalid channel was enabled
An invalid bell was selecteds
An invalid door was specified
an invalid relay was specifieid
The wrong port was selected for ringing
An attempot mwas made to bring into service a port already in service
An out of service port was attempted to be take out of service
The wrong port was attempted to be rung / .
function hdEadGetThreshold, wrong port or prima
function hdEadSetThreshold, wrong port or prima
Could not issue a command to the risc proceassor
Received signal pointer == null
this interrupt process was in the wrong state
Function hdQccHdlcIrq: Error in the received HDLC frame (MBS and MBL only).
Param 1: RX buffer descriptor index Param 2: RX buffer status word Param 3:
RX buffer length
A frame was discarded because now free buffers were available
The received frame was not complete, it should alway be in our system
The transmitted frame had errors
parameters to hdModInitHdlc were incorrect
The length of the received frame was too short
There was a DPLL error during frame reception
The received frame was too long
An attemp was made to get the b channel from the wrong signasl type
An attempt was made to get the channel from the wrong signal
The wrong signal was received
An invalid b channel was requestedd
An attempt was made to send the wronf signal
The hdlc port value was invalid
We failed restoring the handleIdpool after reset and its even not possible to
create a new one
In function BasicWriteBlock, write access wasn't successful
In function write16BitWidthToDevice, write access wasn't successful
In function write32BitWidthToDevice, write access wasn't successful
In function AtmelWriteBlock, write access wasn't successful
Unknown or Unallowed or Missing module
Heat-Interrupt occured.
in case of a switching request with pcm slot already in use
Undefined slot or state of slot
canot assign ip devices of more than one mipr module
/* copy of pointer to artypdata is still in use */
Why does the Dsp send an interrupt if we can't read or write a tribyte
Could not find the bscref associated with the current port.
Self test found no LIC chip in the system.
not possible to crate a device driver for a flash device don't konw waht realy
hapened, but we cant go on with that. Stop the PBX.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16409
16410
16411
16412
16413
16414
16415
16416
16417
hd
hd
hd
hd
hd
hd
hd
hd
hd
16418
16419
16420
16421
16422
hd
hd
hd
hd
hd
16424
16425
16426
16427
16428
16429
16430
16431
16432
16433
16434
16435
16436
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16437
16438
16439
16440
16441
16442
16443
16444
hd
hd
hd
hd
hd
hd
hd
hd
16445 hd
16446 hd
16447 hd
16448 hd
16449 hd
There was a write access to the flash device which wasn't successful.Possible
reasons are that we tried to change a single bit from 0 to 1 or we have a faulty
device.
Error Mapping HdTbxMenuEnuC to MaTbxMenuEnuC - undefined value
error mapping HdTraceCompEnuC to MaTraceCompEnuC
trying to initialyse twice the same parameter
// other values than PP are not allowed
requested parameter not available for PRA
requested parameter not available for trunk line
There is a faulty or missing device on board.
combination of sapi16 partner not allowed
Unknown module on slot during module spec construction: Param 1 is the slot id
which corresponds to the socket number on the board. Param 2 is the module id
as read from the hardware. Param 3 is 0.
could not detect the type of base plate
the parameter id (isdn processId) is out of range
//swidec of module not found or not installed
requested index of swidec exceeds available amount of swidec
no destination module found for this signal dedicated to an interrupt of the
module
unexpected signal received in module interrupt
failed to map HdMonTestFlagEnuC to XaMonTestFlagEnuC
swidec of module not found or not installed.
swidec of module not found or not installed.
This hw/ts was already in use.
Port A pin of SWIDEC is out of range.
Port B pin of SWIDEC is out of range.
Serial port of SWIDEC is not valid.
Tx collision detected.
Unexpected NULL pointer while trying to free transmitted message.
should never have more than 4 Dtmf decoders
signal has not been treatet in Tx Main function
the function should never be called, as the signal is expected to be treated in the
module handler
parameter exceeded range /
device address is unknown
Ethernet driver received unrecognised signal.
string exceeded max len
wrong minor mod received
unexpected enum (treating deafult case
could not generate portref from absport
Unknown Flash module detected. Set access speed to 200ns (slowest possible)
Could not send the store the signal before sending to the DSP because the
outgoing fifo is full
The DSP manager receive a receive ack signal from the DSP, but it contained
the wrong pointer. This probably means that there is an error in the DSP SW.
An error signal was received from the DSP. This is not a good sign, and usually
means that there is an error in the DSP driver SW or the DSP. See aad-0136
chapter 5.2.2 to decode the reply words. p1: DSP Id p2: DSP reply word 0 p3:
DSP reply word 1
The DSP manager received the reply Processing Status Msg when we never
requested it.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16450 hd
16451 hd
16453 hd
16454 hd
16455
16456
16457
16458
16459
16460
16461
16462
16463
16464
16465
16466
16467
16468
16469
16470
16471
16472
16473
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16474
16475
16476
16477
16478
16479
16480
16481
hd
hd
hd
hd
hd
hd
hd
hd
16482
16483
16484
16485
16486
16487
16488
16489
16490
16491
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16492
16493
16494
16495
16496
hd
hd
hd
hd
hd
The DSP manager received a warning that the voice memory is busy, but this
should never happen because the SW should only request a signal record
request simultaneously
The version of the DSP of firmware has been upgraded, and the DSP driver sw
has not bee upgraded accordingly.
A signal was received from the DSP which was not expected
The DSP failed to respond to the last request with a receive acknowledge.
Possible causes of the problem: - The DSP did not start up. Check the
resources in the DSP monitor (Menu 2/2). - The system is fully loaded and the
response waiting timer is too sh
The interrupt Status register for the DSP indicated there was an interrupt, but the
internal HINT bit indicated there wasn't.
HDLC bus driver received an unrecognised event.
HDLC bus driver received data for a dead channel.
Unexpected UA received.
Counter N1 reached its maximum
Counter N2 reached its maximum
HDLC bus primary controller received nonsense.
Retransmission queue corrupt.
Ooops, no frame!
Unhandled timer expiry.
Channel failed to register.
could not translate smAbsPort to isdn port
An unknown port was found on the device
An unknown device was found on the baseplate
Out of Fusion buffers!
Inve Invalid devId
Short Frame recevied.
Music port wasn't switched.
Received an acknowledgement for a frame we haven't sent. P1 = N(R), P2 = last
N(R) received, P3 = send state variable V(S)
a message shall be transmitted where contents do not match range
still data to be sent, not able to send multible buffers
bad aligned VP message received from IPR-Fifo
could not find portadmin of ip router port
Empty frame recieved.
Could not find a conference channel
The swidec could not be configured correctly on the voicemail module
Setting the port state or ringing control on the Swidec was not possible.
Parameter 1: port state (R8 and later) Parameter 2: 0 Parameter 3: 0
The tone switching to the physical highway did not complete
Could not activate some DSP resources
Could not perform DSP system initialisation
Could not perform DSP tone initialisation
Could not perform required homologation switch
Transmit overflow.
failed to write feature block to licence chip
the data base is corrupted
PRIMA not present.
Attemt to use the TSA to transmit and receive HDLC frames from different
highways
Wrong Baudrate requested
Wrong V24 Channel requested
Wrong V24 Bit Format requested
Wrong V24 Parity requested
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16497
16498
16499
16500
16501
16502
16503
16504
16505
16506
16507
16508
16509
16510
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16511
16512
16513
16514
16515
16516
16517
16518
16519
16520
16521
16522
16523
16524
16525
16526
16527
16528
16529
16530
16531
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
16534
16535
16536
16537
hd
hd
hd
hd
16539 hd
16540
16541
16542
16543
16544
16545
16546
16547
16548
16549
16550
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
Wrong V24 Number of Stop Bits requested
V24 Config Object not found
battery alarm --> pbx is powered by battery
power supply alarm --> pbx is powered by power supply
unknown signal minor
unknown signal major
rtc reads unknown date/time
Transmit failed because the TxBD pool was full.
Erase sector started. Can't lock a sector in this state
unknown signal received.
Receive failed because the RxBD pool was full.
Transmit Error
Ethernet transmitter restarted
BSY monitoring re-enabled
Tried to read from flash in erase state, but pause worked and flash returned to
good state.
Received an QUICC_HDLC_TX interrupt when not expecting it.
connection manipulation for system base, but corded terminals expected
connection manipulation for corded terminal,but system base expected
Attempted to play courtesy when resource already allocated.
Attempted to stop courtesy play with invalid resource id
Failed to connected courtesy play
Failed to allocate courtesy play
Failed to disconnect courtesy play
Failed to deallocate courtesy play
Attempted to start courtesy recording with already allocated resource
Failed to connect courtesy record
Failed to allocate courtesy record
Attempted to stop courtesy recording with invalid resource
Failed to disconnect courtesy record
Failed to deallocate courtesy record
attempting to delete courtesy message with already allocated resource
Failed to connect courtesy delete
Failed to allocate courtesy delet
Falied to deallocate courtesy delete
Output descriptor changed for reconnected DSP resource
Transmitter overloaded, packet deleted. P1 = txNextNum, P2 = txNextFreeNum,
P3 = N/A
Error given from DSP, same error as 16448
The DSP was reconnected
At least one of the timeslots given to the DSP is invalid
Over current warning (OCW) active. The 40V port power supply has reached the
limit.
Over current disconnect (OCD) active. The 40V port power supply is overloaded,
ports will be switched off.
The module index doesn't match.
consistency check failed on parameter.
Unknown message received by fifo.
No device found for this ipr port.
Unknown minor is sent by fifo.
unexpected interrupt in ista
unused method in class
undefined timer name
Unknown major/minor in signal. Param 1: Signal id Param 2: 0 Param 3: 0
Unknown minor in this case.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16551 hd
16552 hd
Analogue hardware module out of order. The serial interface between SWIDEC
and QSLhis module don't work anymore.
parameter error
16559 hd
N(S) already in re-transmit list. P1 = N(S), P2 = last N(R) receieved, P3 = V(S)
Unknown MajorMinor.
AD2IP module restarts/resets.
Unexpected signal received.
AIP/AD2IP module detection failed - no announcement frame received
The AIP6500 module is blocked. Downstream (PBX to AIP) buffer contains 100
elements. Further data are thrown away. The data may be control data during
normal operation or software download data. Param 1: AIP6500 module index,
starting at 0 for first AI
Ad2Ip module is too slow. Downstream buffer contains 100 elements. Further
Ad2Ip data are thrown away.
16560
16561
16562
16563
16564
16565
16566
16567
16568
16569
16570
16571
16572
16573
16574
16575
16576
16577
16578
16579
16580
16581
16582
16583
16584
16585
16586
16587
16588
16589
16590
16591
16592
16593
16594
16595
16596
16597
16598
16599
invalid index of qslac received. Param 1: index value Param 2: 0 Param 3: 0
AIP module resets/restarts
Unknown major/minor in this case.
Unknown major/minor in this case.
Invalid port type.
IP address conflict. Someone else is using the same IP address.
Invalid hw extension slot.
No isac address available for the specified module.
Port exceeded range of isdn ports.
Specified port exceeded range of ISDN ports.
Specified port exceeds range of ISDN ports.
Port exceeded range of ISDN ports.
Port exceeded range of Isdn ports.
Port exceeded range of Isdn ports.
Port exceeded range of Isdn ports.
Port exceeded range of Isdn ports.
Unknown interrupt source.
Iom2 port or iom2 frame out of range.
Range of Etab modules exceeded.
erase block failure.
serial flash device: badblock replaced.
The end address is higher than the highest stop address
serial flash - unknown device id
serial flash - device initialization failed
serial flash - allocation of memory block failed
serial flash - no free block for replacement available
serial flash - bad first block
serial flash - no bad block table available
serial flash - not able to create badblock table
serial flash - check of badblock table failed
serial flash - problem during read operation
serial flash - crc check failed on read operation
serial flash - problem during write operation
serial flash - problem during write operation to spare area
serial flash - error check of written data failed
serial flash - crc check failed on write operation
serial flash - erase operation failed
serial flash - not able to replace bad block
serial flash - undefined error
getting interrupt-process for unknown module
16553
16554
16555
16556
16557
hd
hd
hd
hd
hd
16558 hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
hd
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16600
16601
16602
16603
16604
16605
16606
hd
hd
hd
hd
hd
hd
hd
16607 hd
16608 hd
16609 hd
16610 hd
16611 hd
16612 hd
16613
16614
16615
16616
16617
hd
hd
hd
hd
hd
16618 hd
16619 hd
16620 hd
16621 hd
16622 hd
16623 hd
16624 hd
16625 hd
16626 hd
16627 hd
Unexpected signal
unknown owner of IOMFrame
Was not able to issue RISC command.
Transmission error during wave file playback.
Databuffer input queue overflow
Attempt to retreive data buffer from empty input queue
Input queue overflow
Sector erase failed param0: 1:erase failed - try a 2nd time;
2:erase failed
also the 2nd time; param1: sector number
Unexpected signal
was not able to erase sector 0 of the flash device even after 5 retries because
the sector erase timeout expired.
erasing the sector failed although the chip reported no error. Checking if all cells
of this sector are '1' after erase has finished is failed.
Attempt to change a bit from 0 to 1 in Flash. This is NOT possible!
presented rx buffer was NULL. allocate a new one... This might happen some
times but if it happens often, then this is a memory leak
A high load situation is detected. The hardware watchdog feed is no more
possible. The interrupt of ethernet port is temporarily disabled. high load on the
MBL ethernet port: If more than 100 frames per 17ms is received (about 6000
frames per sec), w
Unknown timeout received from inet-stack
hdCmpUnlockSector() was called on a device with no locks.
hdCmpUnlockSector() detected inconsistent lock counts for a device.
No VoP functionality available on this DSP.
could not allocate free h2m slot for: slotId, deviceId, devPortId (not enough
resources on h2m-highway
unknown port port type (not implemented)
Disconnect/Connect 2 way is not implemented for this port type. p1:
myAbsPortId p2: inBchannel p3: myPortType (HdAllPortTypeC)
Spi data are sent too early or we can't write anymore data to the wav file.
AudioPlayer: Format of the wave file is wrong. 1.Parameter should be 0x06
(G711a) or 0x83 (G729a). 2.Parameter should be 1 (Mono). 3.Parameter
should be 0x1f40 which is 8000 (Sample Rate). Other defined values for
parameter 1 0 (0x0000) Unknown 1
AudioPlayer: Wave file contains too little audio data or no data chunk or the
format chunk is missing. 3.Parameter = 1:format chunk missing. = 2:data
chunk missing. = 6:file appears to be empty. = 7:not a wave file. = 8:audio data
lenght is too shor
Problem with file system. We can't write no or not all data into the wave file!
No microcode patch available for CPU errata CPM119 for this silicon revision
Parameter 1: Silicon revision of unsupported CPU
Loading the microcode patch for CPU errata CPM119 failed Parameter 1:
Silicon revision of CPU
Unknown interrupt.
16631 hd
Different errors in this module. The third parameter numbers the error locations.
The user made a system new start in the wiring adapter setting monitor.
Unexpected 'device' found in module specification when creating an A300 ISDN
module (CTOR HdModIsdnSxPbx957C)
Unexpected signal received in module interrupt handler:
HdModIsdnSxPbx957C::serviceInterrupts()
16632 hd
In function 'getNextIsacId()': The 'inIsacId' is out of range. Either a new A300
module with more than 4 ISACs was developped or it is simply a software bug.
16628 hd
16629 hd
16630 hd
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16633 hd
16634 hd
16635 hd
16636 hd
16637 hd
16638 hd
16639 hd
16640 hd
16641 hd
16642 hd
16643 hd
16644 hd
16645 hd
16646 hd
16647 hd
16648 hd
16649 hd
16650
16651
16652
16653
hd
hd
hd
hd
16654 hd
16655 hd
16656 hd
16657 hd
16658 hd
16659 hd
Different errors in this module. The third parameter numbers the error locations.
Unknown device type found in module spec. Params: 1: device id, 2: device
index, 3: 0.
Constructor called with unsupported module type. Parameter 1 is the module
type.
Just for A300/A150: The wiring adapter doesn't match to the module type on this
slot. This Error Id generates the alarm "WrongOrMissingWiringAdapter".
Command with invalid format sent to Si3050 interface class. Parameter 1 is the
line number (1..4 is valid), Parameter 2 is the length of the data and 3 is the
length of the answer.
swidec of module not found or not installed. Parameter 1 is the uncasted swidec
pointer.
Unknown major/minor received in HdModTic4abC. Param 1 is the sig ID.
No DSP interrupt handler for this module.
You tried to instantiate HdPrtModuleC with an unsupported module type in the
module specification. The serial interface to analogue devices is integrated under
the swidec base class. Here the right serial interface class has to be selected.
The first p
Unable to upload DSP firmware. DSP has been disabled. Param1: Slot,
Param2: DSP ID
Attenuation value out of range. Param 1 is attenuation.
Si3050 Frame Detect Interrupt ocurred. This means the link between Si3050 and
its line interface chip Si3019 has a frame lock problem. Such a problem does not
affect or depend from the highway synchronisation. Param 1 is the module class
pointer, Param
Si3050 device class of port not found. Parameter 1 is the uncasted device
pointer.
The virtual base method HdPrtDeviceC::dumpNextRegister() has been called.
This should never happen. Only overloaded methods should be called.
swidec of module not found or not installed. Parameter 1 is the uncasted swidec
pointer.
Unknown major/minor received in HdModTic4abC. Param 1 is the sig ID.
The pointer to the port's Qslac in Eaab2TlPortC is NULL or has not the correct
type. Param 1 is the uncasted pointer value.
Attempt to set invalid date or invalid time to the RTC. Params are y/m/d or h/m/s.
Read invalid date or time from RTC. Params are y/m/d or h/m/s.
unused
failed to upgrade the EIM base block swGeneration
Unsupported device type in module specification. The first parameter is the
device type.
Unsupported port type in module specification. The first parameter is the port
type.
Unsupported jumper configuration on ODAB module. The first parameter are the
four configuration bits in the range 0000b..1111b.
Unsupported signal sent to ODAB module driver.
Error or Warning because the oscillator tuning doesn't work (correctly). 0) Error
case: The temperatur-sensor can't be read or/and no quarz tuning value can't be
set. ==> Oscillator probably runs with hardware reset quarz tuning value. The
DSP interface d
For A300: Overheat alarm is generated if the temperature is too high in the PBX.
For A400/CPU2: Overheat alarm is generated if the temperature is too high on
CPU2 As we reuse the overheat alarm on A400, the same errorid is used in
two files!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16660 hd
16661 hd
16662 hd
16663 hd
16664 hd
16665 hd
16666 hd
16667 hd
16668 hd
16669 hd
16670 hd
16671 hd
16672 hd
16673 hd
16674 hd
16675 hd
16676 hd
16677 hd
16678 hd
Just for A300: Fan stopped alarm is generated if the fan doesn't run.
Unknown Minor for timeout for Hd Pgp main process received. Major was
MajorDsp.
Just for EAAB2 module: Failed to allocate simple connection resource or failed to
do a simple connection. Analogue trunk has no or one way connection on EAAB2
module.
Unknown module on slot during module class construction: Param 1 is the slot
id which corresponds to the socket number on the board. Param 2 is the module
enum value from HdAllModuleTypeEnum. Param 3 is 0.
Reading RTC data has failed or a transmission retry happened. Param 1 is 1 to
indicate failure, else 0. Param 2 is the retry count, with a value of 1 for normal
operation. Param 3 is 0.
Writing RTC data has failed or a transmission retry happened. Param 1 is 1 to
indicate failure, else 0. Param 2 is the retry count, with a value of 1 for normal
operation. Param 3 is 0.
Activated oscillator fail status flag detected while reading the RTC chip M41T00
or DS1377(on A400). Time and date are expected to be invalid now. Params:
hour, minute, second.
RTC time lost while system was off and RTC ran from supercap. Param 1: 1:
Oscillator failed flag set, 0: flag cleared. Param 2: 1: Initial RTC power up (RTC
power was interrupted),
0: RTC had power without an interruption. Param
3: 1: Date an
Invalid raw data while reading the RTC time. The parameters are three bytes
encoding seconds, minutes, and hours.
Invalid raw data while reading the RTC date. The parameters are three bytes
encoding day, month, and year.
HdBchComC::sendBChSig() is the central method to send signals to other
processes who need to communicate with the ISAC-SX's HDLC handling IRQ.
This error-report means that someone added a new signal but forgot to extend
this function.
HdBchComC::receiveB() Overflow in the receive buffer --> we have lost data
now!
HdCmpIsacSxC::treatBChSignal() this is the main signal handler for the BCH
Hdlc IRQ. The state machine is in an invalid state. Probably memory was
overwritten or someone changed code without updating the handler method ...
HdCmpIsacSxC::treatSignalStateIdle() the HDLC IRQ signal handler only treats
'MajorHdlcTa' A signal with an unknown Major was received --> who sent this
and why?
HdCmpIsacSxC::treatSignalStateIdle() In state idle the only acceptable signal
minor is 'HdlcTaHdConnectReq' Receiving any other HDLC signal minor is a
bug in the state machine...
HdCmpIsacSxC::treatSignalStateActive() this is the BCH HDLC IRQ signal
handler. Only signals with 'MajorHdlcTa' are acceptable. Receiving an other
signal is a bug.
HdCmpIsacSxC::treatSignalStateActive() the only acceptable signal minors in
this state are 'HdlcTaHdDataReq' and 'HdlcTaHdReleaseReq' Receiving any
other signal minor is a bug in the state machine!
HdCmpIsacSxLttC::hwCmdB() An unknown command was issued to this
method. Most likely, someone extended BchHdlcCmdEnu without updating this
method --> it's a bug fix it
HdCmpIsacSxLtsC::hwCmdB() An unknown command was issued to this
method. Most likely, someone extended BchHdlcCmdEnu without updating this
method --> it's a bug fix it
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16679
16680
16681
16682
hd
hd
hd
hd
16683 hd
16684 hd
16685 hd
16686 hd
16687 hd
16688 hd
16689 hd
16690 hd
16691 hd
16692 hd
16693 hd
16694 hd
16695 hd
16696 hd
16697 hd
16698 hd
16699 hd
Timeout in communication on the MII bus. The access to the ethernet switches is
affected in that case. Param 1 is: 0: Read access, 1: Write access.
No wave file reader (player) available.
There shouldn't be available a wave file player/recorder.
Wave file player: No file name or the file can't be opened.
The parallel flash device is not empty, i.e not all cells are 0xff i5..i7.x:
Parameter 1: device Parameter 2: offset from device startaddress Parameter 3:
value at offending address R8 and later: Parameter 1: Device address
Parameter 2: Number o
sector is not empty, i.e not all cells are 0xff Parameter 1: sector Parameter 2:
offset from sector startaddress Parameter 3: value at offending address
The function hdBioGetSdramMagicWord() returned FALSE, i.e there is a
problem with the SDRAM module on MBS/MBL. Parameter 1: heapextension
id
The sector blank check after erasing a flash sector found unerased values.
Parameter 1: Sector address, 2: Number of unerased UInt32 words, 3: pattern of
all words in the sector, ANDed together.
Flash sector erase failed. After 5 retries still had a problem. Parameter 1: Sector
address, 2: Sector number (beginning at 0), 3: retry counter
After end of the erase wait phase the values being read from the flash chip are
still changing. Typically status register values like 0x0018 or 0x005c can be read
then. Parameter 1: Sector address, 2: 2nd last read UInt32 word, 3: last read
word
During the erase wait phase polling of the status register is expected to take
some time clearly above zero. Counting these polling reads has shown very low
values. Parameter 1: Bit pattern of the status register,
cumulated with
OR-operation
During the erase wait phase polling of the status register is expected to terminate
within a certain time. The polling has been stopped with a timeout. Parameter 1:
Bit pattern of the status register, Parameter 2: polling count on flash chip 0,
Paramete
This should never happen!...this signal pointer should never be NULL. The
following errorReport was introduced to track br33359, respectively to see that it
happened. p1: interface type (HdPrtPortIfC) p2: slot id p3: interrupt priority
(IrqPrioEnum
Congestion tone detector: DSP reported overflow in arctangent routine.
The parallel flash sector address is out of bounds. Params: 1: Error location 2:
Sector address 3: Sector count
Wrong board type in module spec. Param 1: MainBoardVersionEnum, Param 2:
0, Param 3: Error location.
The fixed H2M hw/ts for the dect synchronization is already occupied. A dect
synchronisation may not be possible. p1: dect synchronization highway p2:
dect synchronization timeslot p3: not used
Could not reserve the dect sync timeslot. A dect synchronisation may not be
possible. p1: dect synchronization highway p2: dect synchronization timeslot
p3: not used
Congestion tone detector: Attempt to start congestion tone detector for an
unknown country.
Congestion tone detector: Unknown event. Parameter 1: Event value.
Application Loading Interface (ALI) contents a too large most/least significant
word of base word address of partition to transfer address. Or Application
Loading Interface (ALI) contents a too large most/least significant word of
maximum partition size
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16700 hd
16701 hd
16702 hd
16703 hd
16704 hd
16705 hd
16706 hd
16707
16708
16709
16710
16711
hd
hd
hd
hd
hd
16712 hd
16713 hd
16714 hd
16715 hd
16716 hd
16717 hd
16718 hd
16719 hd
16720 hd
16721 hd
16722 hd
Wave Player: No audio data or an error is noted for the wave file stream.
Parameters: 1. How much bytes read. 2. -. 3. =1 wave player not started, =2
wave player was running, =3 wave player ran in continuous mode.
Wave Player: No audio data and/or an error is noted for myWaveFile and/or no
data buffer. Paramters: 1. port ref. 2. channel. 3. -.
Wave file header is wrong. Wave file is renamed to illegal. This errror report
appears twice back-to-back. First error report: Parameters: 1. port ref. 2.
channel. 3. first part of the file name. Second error report contains the rest of the
file name.
This array index is out of range of the OurQslacGxGrCoeff array. No other
QSLAC coefficients are loaded. This code is no more used after i7.7 step 33.
Missing device address definition for this module type. Param 1: Slot Param 2:
Module ID code (HdAllModuleIDEnum::Values) Param 3: 0
Unknown device type found in module spec. Params: 1: device id, 2: device
index, 3: 0.
swidec of module not found or not installed.
invalid index of qslac received. Param 1: index value Param 2: 0 Param 3: 0
Unknown major/minor in signal. Param 1: Signal id Param 2: 0 Param 3: 0
Analogue port number range overflow.
Analogue port number range overflow.
Analogue port number range overflow.
Protocol check for QSLAC and VoicePort data failed. Param 1 & 2: Debugging
data Param 3: Error case If this makes no sense at all try having a look at
error 16722!
The calculated SDRAM parameter do not match the current settings for SDRAM.
This may lead to timing problems with SDRAM access. The following
Parameters are the calculated values, compare with settings in osinialphaXXX.s
Parameter 1 = Reg. OR1, Parameter
Method: HdCmpFalc56V22C::hwCmdB() this is a bug! most likely someone
extend BchHdlcCmdEnu without updating this method.
Method: HdCmpFalc56V22C::treatBChSignal()
The state machine is in an
invalid state. Probably memory was overwritten or someone changed code
without updating the handler method ...
Method: HdCmpFalc56V22C::treatSignalStateIdle() The HDLC IRQ signal
handler only treats 'MajorHdlcTa' A signal with an unknown Major was received -> who sent this and why?
Method: HdCmpFalc56V22C::treatSignalStateIdle() In state idle the only
acceptable signal minor is 'HdlcTaHdConnectReq' Receiving any other HDLC
signal minor is a bug in the state machine...
Method: HdCmpFalc56V22C::treatSignalStateActive() this is the BCH HDLC
IRQ signal handler. Only signals with major'MajorHdlcTa' are acceptable.
Receiving an other signal is a bug.
Method: HdCmpFalc56V22C::treatSignalStateActive() The only acceptable
signal minors in this state are 'HdlcTaHdDataReq' and 'HdlcTaHdReleaseReq'
Receiving any other signal minor is a bug in the state machine!
Method: HdCmpFalc56V22C::setHdlcToBChannel() the passed in value for
bchannel can not be used to set the register tss3 valid values are 1..31
The DSP driver has been instructed to load an illegal/unknown DSP firmware.
Parameter 1: slot Parameter 2: local DSP ID Parameter 3: frimware ID
More than max number of ports in device class addPort call. Param 1: Device
type Param 2: Device ID Param 3: Port type
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16723 hd
16724 hd
16725 hd
16726
16727
16728
16729
hd
hd
hd
hd
16730 hd
16731 hd
16732 hd
16733 hd
16734 hd
16735 hd
16736 hd
16737 hd
16738 hd
16739 hd
16740 hd
16741 hd
16742 hd
16743 hd
16744 hd
16745 hd
16746 hd
The specified number of ports is higher than allowed for the chosen device type.
Param 1: Device type Param 2: Number of ports Param 3: Maximum allowed
number of ports
Attempted to add more ports to the device than allowed. Param 1: Device type
Param 2: Number of already added ports Param 3: Maximum allowed number of
ports
Polling the DSPs HRDY flag was interrupted because the flag did not get active
within 500ms. Parameter 1: Slot ID Parameter 2: DSP ID (local)
The FPGA raised a collision warning interrupt, i.e. a timeslot that was requested
for switching is already used in another connection. Params 0 timeslot 1
highways [ bit 0 -> hw0; bit1 -> hw1; bit2 -> hw2 (falc hw)] 2 -not usedunexpected signal received in module interrupt handler of tic-1pri
wrong port parameter passed to method setSynchroMux() of module class
Failed to write trial licence block to EIM
The attenuation value passed to getAttenuation() is out of range. Param 1:
attenuation value, Param 2: 0, Param 3: 0.
On startup the firmware could not be loaded into the FPGA of the module TIC1PRI. Most likely the module is defect. Proposed solution: exchange the
module on the A300/A150 with a new one!
The attenuatin enum value is out of range. Parameter 1 contains the value.
The attenuatin enum value is out of range. Parameter 1 contains the value.
Unexpected state of the analogue remote access (analog mode) process.
Param 3: Error numeration. Param 1 and 2: depending on error number (param
3). See code.
A blocking of the ethernet driver in sending direction has been detected.
Parameter 1: tbase fcc1 parameter Parameter 2: tbptr fcc1 parameter
Parameter 3: txIntBuf
Invalid RISC command sent to FCC of the MPC8260. Param 1: 0 Param 2: 0
Param 3: Error location
Inconsistent error flags in the tx interrupt handler. The global tx error flag TXE is
not consistent with the error information found in the tx buffer chain. Param 1:
TXE is set (bool) Param 2: Any error found in tx buffer chain status (bool)
Param 3:
The correction for the MPC8260's TBPTR bug has been called. In sending error
cases the FCC sending pointer TBPTR may be some steps ahead of the correct
position. This must be handled by software. Parameter 1: Status word of the first
buffer containing an
The channel number on relay port is out of range. Parameter 1: 0: card is in I/O
mode, 1: card is in door port mode Parameter 2: channel number Parameter 3:
0: the channel is jumpered as input, 1: ... as output If parameter 3 is 0, the
jumpers are not
A relay port object has been created with incorrect register addresses.
Parameter 1: Input port address Parameter 2: Relay port address Parameter 3:
0
A400: Missing device address definition for this module type. Param 1: Slot
Param 2: Module ID code (HdAllModuleIDEnum::Values) Param 3: 0
Wrong index for access to CPU card DSPs. Param 1: index Param 2, 3: 0
Wrong index for access to CPU card DSPs. Param 1: index Param 2, 3: 0
Unknown CPU card ID in hdBioInitPbxType. This mistake is punished with a
crash. Param 1: ID value Param 2 & 3: 0
The selected slot type is unknown. Param 1: slot type value Param 2: 0 Param
3: Error location
This module ID is missing in the list of system module revisions. Param 1: ID
value Param 2 & 3: 0
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16747 hd
16748 hd
16749 hd
16750 hd
16751 hd
16752 hd
16753 hd
16754 hd
16755 hd
16756 hd
16757 hd
16758 hd
16759 hd
16760 hd
16761 hd
16762 hd
16763 hd
16764 hd
16765 hd
16766 hd
16767 hd
16768 hd
16769 hd
16770
16771
16772
16773
hd
hd
hd
hd
The selected interrupt priority in hdBioGetPendingInterruptLevel is unknown.
Param 1: Interrupt priority Param 2 & 3: 0
This slot is not a valid card slot and not the backplane. Param 1: Slot enum
value Param 2 & 3: 0
This slot is not a valid system module slot. Param 1: Slot enum value Param 2
& 3: 0
Slot, device or bus mode are out of range. Param 1: Slot Param 2: Device
Param 3: Bus mode
This device is not valid on a system module. Param 1: Device enum value
Param 2 & 3: 0
This device is not valid on the CPU card. Param 1: Device enum value Param 2
& 3: 0
The slot value is in range, but not handled. Param 1: Slot enum value Param 2
& 3: 0
The 8 bit access to 16 bit device mode is not valid for this device type. Param 1:
Slot enum value Param 2: Device enum value Param 3: 0
Unknown mainboard type. Defective or unknown hardware. Param 1: Mainboard
type as read from the hardware Param 2 & 3: 0
There is no module installed in this slot to handle the interrupt. Parameter 1:
Interrupt priority value Parameter 2: Slot ID Parameter 3: 0
Wrong signal type for serial communication to analogue port device. Param 1:
Signal number, Param 2: 0 Param 3: 0
Device index for serial communication to analogue port device out of range.
Param 1: Index value, Param 2: 0 Param 3: 0
On startup the firmware could not be loaded into the FPGA of the CPU1 module.
Most likely the module is defect! Proposed solution: exchange the module on
the A300/A150 with a new one! Responsible Lowlayer man: * Franz Brandl /
3255
The FIFO device is blocked. Wrong address or hardware failure? Param 1:
Register address Param 2: Retry counter Param 3: 0
RUN STAPL Player for the backplane FPGA doesn' work. 1.Param: status;
2.Param: errorLine; 3.Param: exitCode. Look up the exit_code in function main()
in jamstub.c.
Unknown device type found in module spec. Param 1: device id Param 2:
device index Param 3: 0
CPU1 FPGA acces test failed. Just after loading the FPGA, the bus transparency
ist tested. There have been problems that inhibit useful operation of the CPU1
periphery. Param 1: Error counter A Param 2: Error counter B Param 3: 0
Failed to upload DSP firmware partition.
DSP application loader didn't get ready in time.
DSP application loader reported a partition size of 0. Can not load application
(DSP firmware).
The card exceeded the powerup time maximum value. Param 1: Slot number
(1..7) Param 2: Last value from the power good register Param 3: Card
presence flags
resetPort() - timeout waiting for reset to complete.
Unsupported device type found in spec. Getting the wrong device we do not
know any indulgence.
Function ethWrite(..) ddWrite() returned error other than
DEVICE_EQUEUE_FULL p1: INET_ERRBASE p2: INET_ERRDDWRITE p3:
retVal
<== this is the value we are interested in This errorlog was added
to find the cause of the crash reported in
Congestion tone detector: DSP reported overflow in complex resonator
Dial tone detector: DSP reported overflow in complex resonator.
Dial tone detector: DSP reported overflow in arctangent routine.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16774 hd
16775 hd
16776 hd
16777 hd
16778 hd
16779 hd
16780 hd
Dial tone detector: Attempt to start congestion tone detector for an unknown
country.
Dial tone detector: Unknown event. Parameter 1: Event value.
The first access to backplane FPGA registers delivered wrong values or was not
possible at all. Param 1: FPGA revision code (FFFFFFFFh: access failed)
Param 2: Power good bits, should be 01h (FFFFFFFFh: access failed) Param 3:
0
Read access of the power good register before line cards are initialised. The
access to the power good backplane FPGA register delivered a wrong value or
was not possible at all. Param 1: Number of slots on the backplane Param 2:
Card present bits, 1 st
The reserved card ID bits are nonzero. There must be something wrong with the
ID. The module is ignored and must be replaced. Param 1: Slot number (1..7)
Param 2: The wrong ID (bits 15 to 11 should be zero) Param 3: 0
The access to the backplane FPGA failed during line card powerup. This
problem typically does not depend on the current card. From the loop counter we
can see if it fails in the first access or at some later point. Param 1: Slot number
(1..7) Param 2: Lo
Database backup parameter undefined in rtose5.conf p1: base address of
database located in RAM p2: size of database located in RAM p3: -
16786 hd
Database backup copy parameter undefined in rtose5.conf p1: base address of
database located in RAM p2: size if database located in RAM p3: Database size parameter not correct in rtose5.conf p1: size of database
located in RAM p2: size of copy databse located in RAM p3: - To perform a
background backup the size of the active database and the copy area have to be
the same.
Could not create database backup directory p1: errno p2: - p3: Database parameter undefined in rtose5.conf p1: base p2: size p3: - To be
able to perform a restore of the database, the parameter (base and size) must be
configured in rtose5.conf.
Could not load FPGA firmware (located in filesystem) into primary rate module's
fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in
STAPL file p3: exitcode
Could not load FPGA firmware (part of linked application) into primary rate
module's fpga. Meaning of parameters: p1: status of JAM Player p2: line of
error in STAPL file p3: exitcode
16787 hd
The read access to the backplane FPGA failed with an access timeout. Param
1: Command Param 2: Irq status Param 3: Loop counter in microseconds
16781 hd
16782 hd
16783 hd
16784 hd
16785 hd
16788 hd
16789 hd
16790 hd
16791 hd
16792 hd
The write access to the backplane FPGA failed with an access timeout. Param
1: Command Param 2: Irq status Param 3: Loop counter in microseconds
The read access to the 2PRI module FPGA failed with an access timeout. Maybe
you have an FPGA which does not match the module version (Serial version
module without serial FPGA FW in filesystem or prototype module with serial
FPGA FW in filesystem)? Param
The write access to the 2PRI FPGA failed with an access timeout. Param 1:
addr Param 2: ready status Param 3: Loop counter in microseconds
Could not load FPGA firmware (part of linked application) into the FXS module's
FPGA. The FXS module will not be started. Meaning of parameters: p1: status
of JAM Player, p2: line of error in STAPL file, p3: exitcode.
Could not load FPGA firmware (located in filesystem) into backplane fpga.
Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file
p3: exitcode
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16793 hd
16794 hd
16795 hd
16796 hd
16797 hd
16798 hd
16799 hd
Could not load FPGA firmware bitfile (located in filesystem) into CPU1 fpga. This
is done via the SPI interface.
Could not load FPGA firmware (located in filesystem) into FXS module's FPGA.
The driver will try to load the linked firmware instead. Meaning of parameters:
p1: status of JAM Player, p2: line of error in STAPL file, p3: exitcode.
Wrong parameter passed to method, that sets the synchronization for the
primary rate module of the a400. Port number must be 0 or 1. Most likely this is
a software problem.
unexpected signal received in primary rate module interrupt handler: HdModA400PrimaryRateC::serviceInterrupts()
Unknown 'module spec' passed to a400 primary rate module driver. As a
consequence it is unknown what firmware to load into the FPGA. Parameter p1
is: HdAllModuleTypeEnum
The application-ram checksum failed, Parameter1=mem.begin,
Parameter2=mem.end
Access and control of the power supply are not possible. The system will try to
run without controlling it. Parameter 1: PSU status byte value Parameter 2: PSU
firmware version Parameter 3: 0
16808 hd
Wrong signal major received in the power supply interrupt process. Parameter
1: signal pointer Parameter 2: signal major & minor Parameter 3: 0
Some process tried to attach while the observer is not free. Parameter 1: current
observer instance pointer Parameter 2: Process ID of the signal sender
Parameter 3: 0
Observer detach signal from wrong process received. Parameter 1: current
observer instance pointer Parameter 2: Process ID of the signal sender
Parameter 3: 0
The periodical temperature check finds the system unable to cool enough. The
power manager is alerted to switch off loads or shut down the system.
Parameter 1: Degrees Celsius on the PSU Parameter 2: Degrees Celsius on the
CPU1 Parameter 3: 0
The power supply reported an over temperature. The power manager is alerted
to switch off loads or shut down the system. Parameter 1: Status byte of the
PSU Parameter 2: Degrees Celsius on the PSU Parameter 3: 0
If OurIntOverCurrentBit is set, the current of the internal primary supply has
reached the threshold of 4 A, which is 80% of the maximum load. The power
consumption must be reduced! A set OurOverCurrentBit says that the over
current detection of the
External power supply undervoltage or overvoltage detected. Parameter 1:
Status byte of the PSU Parameter 2: The voltage of the external power supply in
mV Parameter 3: The aux voltage raw value
All present fans failed (one of one present, or two of two present). The power
manager is alerted to shut down the system immediately. Parameter 1: Status
byte of the PSU Parameter 2: Degrees Celsius on the PSU Parameter 3: 0:
One fan configured, 1: Tw
One of two present fans failed. These two redundant fans are still able to cool
the system. An alert is sent to the power manager for information. The system
needs to be serviced to reestablish full reliability. Parameter 1: Status byte of the
PSU Pa
16809 hd
Error - I2C Eeprom Device of the EIP1 module is not responding. Therefore the
EIP1 Module type and teh MAC address can be read. Parameters: 1: slotNr
// The slot of the EIP1 carrier board 2: subSlotId
// Subslot of the EIP
16800 hd
16801 hd
16802 hd
16803 hd
16804 hd
16805 hd
16806 hd
16807 hd
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16810 hd
Error - Invalid Module Type (Eeprom Data Invalid) The EIP1 Module types read
from the Eeprom Data is invalid. Parameters: 1: slotNr
// The slot of
the EIP1 carrier board 2: subSlotId
// Subslot of the EIP (0, 1) 3: 0
16811 hd
Error - I2C Eeprom Device read failed Therefore the EIP1 Module type and the
MAC address can be read. Parameters: 1: slotNr
// The slot of the
EIP1 carrier board 2: subSlotId
// Subslot of the EIP (0, 1) 3: 0
16812 hd
16813 hd
16814 hd
16815 hd
16816 hd
16817 hd
16818 hd
Error - Invalid MAC Address (Eeprom Data Invalid) Therefore the EIP1 Module
MAC address is not valid. Parameters: 1: slotNr
// The slot of the
EIP1 carrier board 2: subSlotId
// Subslot of the EIP (0, 1) 3: 0
Bus timeout detected while uploading DSP firmware in slow mode. Parameter1:
Slot (SlotTypeEnum) Parameter2: Local DSP ID Parameter3: Undefined PRIMA command request ID param 0 = PrimaPortId param 1 =
SysChanId param 2 = primaCmdEnu
Max. number of PRIMA exceeded
An RTP packet in to net direction could not be sent using the sendto call.
Parameter 1: errno code from the IP stack. Parameter 2: IP destination address
Parameter 3: UDP destination port
Undefined signal minor received under MajorHdRtp. Parameter 1: The sender
process ID Parameter 2: Signal major Parameter 3: Signal minor
Ethernet driver re-enalbed after high load situation.
16822 hd
A setsockopt call has failed during initialisation of the RTP send socket.
Parameter 1: Error location Parameter 2: System error code Parameter 3: 0
The database copy failed: Parameter 1 = sizeDb, Parameter 2 = sizeDbCopy,
Parameter 3 = errorcode from memcpy_s
A watchdog timeout has happened in the DSP firmware. The DSP will be reset
and the firmware restarted. Param1: DSP ID Param2: Slot
Syntax Error in A400 configuration file for the xBRI module, see the following file
in the A400 file system: /home/data/modconfig/bri.txt Expected to read a line,
like: slot=7; Questions? Ask 3255 Franz Brandl
16823 hd
Syntax Error in A400 configuration file for the xBRI module, see the following file
in the A400 file system: /home/data/modconfig/bri.txt Expected to read a line,
like: stsettings=tsst; Questions? Ask 3255 Franz Brandl
16819 hd
16820 hd
16821 hd
16824 hd
16825 hd
16826 hd
16827 hd
16828 hd
16829 hd
Syntax Error in A400 configuration file for the xBRI module, see the following file
in the A400 file system: /home/data/modconfig/bri.txt Error is: The slot number
exceeded the given internal limit Questions? Ask 3255 Franz Brandl
Could not load FPGA firmware (located in filesystem) into xBRI module's fpga.
Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file
p3: exitcode
Could not load FPGA firmware (part of linked application) into xBRI module's
fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in
STAPL file p3: exitcode
unexpected signal received in xBRI module interrupt handler:
HdModA400xBriC::serviceInterrupts()
Wrong parameter passed to method, that sets the synchronization for the xBRI
module of the a400. Port number must be in the range [0..7] . Most likely this is
a software problem.
The method hdCmpGetDeviceBaseAddress() is called to early. Have look at the
callchain of the errorreport and sort the problem out. If you have questions,
then ask Beat Schenk.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16830 hd
16831 hd
16832 hd
16833 hd
16834 hd
16835 hd
16836 hd
16837 hd
16838 hd
16839 hd
16840 hd
16841 hd
16842 hd
16843 hd
16844 hd
16845 hd
16846 hd
16847 hd
16848 hd
16849 hd
16850 hd
16851 hd
16852 hd
16853 hd
PRIMA FPGA firmware not found in filesystem (system will try to get it from
code): parameter 1: HdAllModuleTypeEnum parameter 2: 0=STAPL file not
found
1=VME file not found parameter 3: 0=Undef
1=AD2
2=UDLT
PRIMA FPGA firmware could not be loaded: parameter 1: status parameter 2:
errorLine parameter 3: exitCode Details see Ramlog of PBX startup!
Access to the PSU does not work. The serial link connector or cable is damaged.
Parameter 1: PSU status code (byte) Parameter 2: PSU firmware version
Parameter 3: 0
Access to the PSU does not work. If the read values are identical to the
command codes (status = 20h, version = 30h), the communication interrupt of
the PSU firmware is blocked. Parameter 1: PSU status code (byte) Parameter
2: PSU firmware version P
DSI FPGA not present (instance not found) param 1: 0 param 2: SysPortId
inPortId param 3: SysChanId inChanId or: param 1: 1 param 2: inSlotId
param 3: inLocalPortId
could not translate between portref and absolute port nr param 1: SysPortId
portId param 2: 0 param 3: 0
Signal could not be sent (allocSig failed)
*** obsolete ***
There is no module installed in this slot to handle the signal. Parameter 1: Slot
ID Parameter 2: 0 Parameter 3: 0
The power down interrupt has been raised in error. We still have power 5
seconds later! Parameter 1: 0, Parameter 2: 0, Parameter 3: 0.
Hardware timer of QCC has expired with unassigned function. Parameter 1:
Timer index (0..3) Parameter 2: 0 Parameter 3: 0
DSI Module: The I2C device (Eeprom) is not accessible
Reading the I2C device (Eeprom) failed
The slot number is not in the valid range for DC/DC sync. Parameter 1: Slot
number Parameter 2: 0 Parameter 3: 0: disable, 1: enable
The DC/DC variant of the module spec is unknown. The supply of this card is
not getting initialised. Parameter 1: Slot number Parameter 2: DC/DC variant
value Parameter 3: 0: disable, 1: enable
No Swidecs are allowed on this platform. Parameter 1: Slot number Parameter
2: Number of Swidecs in the module spec Parameter 3: 0
Initialisation of the MPC8260 UPM has failed. This affects correct peripheral
access. Parameter 1: 0 Parameter 2: 0 Parameter 3: 0
The BRI configuration file for the A400 in the filesystem could not be opened for
writing.
LCD command could not be sent (FPGA LCD driver was not ready) Parameter
1: lcdCmdP->command, Parameter 2: lcdCmdP->length, Parameter 3:
(UInt32)lcdCmdP->dataP
LCD command Timeout Parameter 1: lcdCmdP->command, Parameter 2:
lcdCmdP->length, Parameter 3: (UInt32)lcdCmdP->dataP
LCD driver: Unexpected signal SigLedLcdResponse received (should be
received only while waiting for SigLedLcdResponse)
In method: HdModBriConfigSynchFacadeC::updateFile() Could not create
directory: /home/data
In method: HdModBriConfigSynchFacadeC::updateFile() Could not create
directory: /home/data/modconfig
Pcm Highways Tx Collision Detection on A470. Param 1: Number of the bit of
the 8MBit Highway (H8M). Bit 4 = H8M 2, Bit 2 = H8M 1, Bit 1 = H8M 0. Param
2: Timeslot (0..7fh) Param 3: Collision Source (Bit 0-2), Bit 2: Line Card Module,
Bit 1: Cpu1, Bit
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16854 hd
16855 hd
16856 hd
16857 hd
16858 hd
16859 hd
16860 hd
16861 hd
16862 hd
16863 hd
16864 hd
16865 hd
16866 hd
16867 hd
16868 hd
16869 hd
16870 hd
16871 hd
Syntax Error in A400 configuration file for the xDSI module, see the following file
in the A400 file system: /home/data/modconfig/dsi.txt Parameter 1 = 1:
Expected to read a line, like: slot=7;
= 2: Expected to read a line, like:
dsimode=
In method: HdModDsiConfigSynchFacadeC::updateFile() Parameter 1 = errno
Parameter 2 = 1: Could not create /home/data directory
= 2: Could not
create /home/data/modconfig directory
= 3: Could not open for writing:
/home/data/m
PSU FIFO handling error detected. The PSU link is disabled immediately.
Parameter 1: Number of sent bytes, Parameter 2: Number of received bytes,
Parameter 3: 0: send command, 1: receive command
Failed to write feature block to EIM
No Manufacturing data block (factory block) in the FLASH for Cpu1 available!
Param1: Hardware version id. Param2: First letter of the keyword. Param3:
Second letter of the keyword. ==> The Pbx (FXS and DSI modules) uses the
"slow chip select mode" in
Unknown interrupt occured in module handler HdModA400Cpu2C
Unexpected signal was received in interrupt signal handler of
HdModA400Cpu2C.
Writing to the hex file failed. Parameter 1: Return value of writeRecord,
Parameter 2: 0, Parameter 3: 0 when creating the file, 1 when closing the file.
The firmware of the power supply is invalid or outdated. Make sure to update as
soon as possible Parameter 1: Status byte of the PSU (refer to hwdoc0186/Status-Byte) Parameter 2: Firmware Version of the power supply
(update is required
The update of the Power Supply Firmware failed for some reason. Parameter
1: The number of pages written to the PSU (myPageCount) Parameter 2: The
number of retries for a page
(myPageRetryCount) Parameter 3: The
previous page number
Response timeout expired from Ose function "receiveSigTmo". No reply in
function sendAndWaitReadPowerSupplyValue(). param 1: Major. param 2:
Minor.
Response timeout expired from Ose function "receiveSigTmo". No reply in
function sendAndWaitReadPowerSupplyValue(). param 1: Major. param 2:
Minor. param 3: inCommand.
Wrong signal major/minor received in the power supply control process.
Parameter 1: signal pointer Parameter 2: signal major & minor Parameter 3:
error report index
Access to temperature sensor Cpu1 and hardware real time clock (rtc) over I2C
interface don't work. parameter 3: = 0: Complete failure or transmission retries.
parameter 3: = 1: biosOpen returns no valid handle. parameter 3: = 2: The
access failed or
Sending StMS trigger packets is not possible. StMS will not work in "to net"
direction. Parameter 1: Errno code from the IP stack, Parameter 2: 0,
Parameter 3: 0.
The Pbx (FXS and DSI modules) uses the "slow chip select mode" instead of the
fast chip select mode! Param1: Cpu1 hardware id value. Param2: true/false:
Manufacturing data block (factory block) in the FLASH of Cpu available?
Illegal message length received from DSI FPGA Parameter 1: inLocalPortId
Parameter 2: inChanId Parameter 3: rxLength
The STAPL player failed to load the CPLD file in the filesystem. Parameters are:
- status - errorLine - exitCode In the OSE ramlog you find a line of the form:
CPU2-CPLD: STAPL Player *failed* to load: filename. status: 0xDD, exitcode:
0xDD which m
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
16872 hd
16873
16874
16875
16876
hd
hd
hd
hd
16877 hd
16878 hd
16879 hd
16880 hd
16881 hd
16882 hd
16883 hd
16884 hd
16885 hd
18001 pr
18002 pr
18003
18004
18005
18006
18007
18008
18009
18010
18011
18012
18013
18014
18015
18016
18019
18020
18021
18022
18023
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
18024 pr
18025 pr
18026 pr
The FPGA test access function detected some failures. The FXS module will not
be started. Parameter 1: Error Counter A, Parameter 2: Error Counter B,
Parameter 3: Slot Number.
Problem with the Power Supply Control process. What kind of problem it is,
check the code. Param 3: Index of the error report.
DoS: An IP address has been added to the blocked address list.
DoS: An IP address was removed from the blocking list
For A400/CPU2: an USB overcurrent alarm is generated if the power
consumption on the USB ports of the CPU2 is too high Parameter P1: the
slotid of the CPU2 module
The licence chip is not responding at all. Parameter 1: ATR value, Parameter
2: 0, Parameter 3: 0.
The licence chip delivers an unsupported ATR value. Parameter 1: ATR value,
Parameter 2: 0, Parameter 3: 0.
The licence chip can not be unlocked for writing. Parameter 1: 0, Parameter 2:
0, Parameter 3: 0.
The licence chip security code verification can not be executed. Parameter 1: 0,
Parameter 2: 0, Parameter 3: 0.
Unlocking the licence chip for writing failed. The error counter could not be
erased. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0.
The licence chip security code update can not be executed. Parameter 1: 0,
Parameter 2: 0, Parameter 3: 0.
The licence chip write access can not be executed. Parameter 1: 0, Parameter
2: 0, Parameter 3: 0.
The licence chip can not be set to idle state. Still trying to continue access.
Parameter 1: Number of low bits (1..32), should be zero, Parameter 2: 0,
Parameter 3: 0.
Unknown OSE signal received in the Acknowledge Tone Process -> Unknown
Major or Minor signal part!
Impossible Bcs reference for starting an ack tone pattern.
Error in LED jobs : more than Int8Max jobsError in LED jobs : more than Int8Max
jobs.
Error in intern port references for blinking port LED.
Error in intern-extern port references for blinking port LED.
Error in LED jobs : no more jobs.
Impossible bcs ref or mismatch in the audio rhythm tables.
Wrong signal for prpgpgaudiorhythm process.
Unknown audio rhythm to start
Wrong parameter handling for flash
Number acces for international dial number too big
Error in rhythm generating on fix timeslots
Audio rhythm generation could not start
Audio rhythm generation could not continue
Audio rhythm generation for confernce could not continue
Audio rhythm generation for conference could not start
A tone rhythm generation was still active
A time out for tone rhythm generation was still active
A conference rhythm generation was still active
A time out for conference rhythm generation was still active
Unknown bcsRef to release a bchan.
prp1_tele_service_busy : has not been found the passed bchan in the passed
portref
Has not been reserved in the general channel array, a field for the passed
bchannel
One more than pbx manageable bchannels.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
18027
18029
18030
18031
18032
18033
18034
18035
18036
18037
18038
18039
18040
18041
18042
18043
18044
18045
18046
18047
18048
18049
18050
18051
18052
18053
18054
18055
18056
18057
18058
18059
18060
18061
18062
18063
18064
18065
18066
18067
18068
18069
18070
18071
18072
18073
18074
18075
18077
18078
18079
18081
18082
18083
18084
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
Has not been released, to the general channels array, the field of the passed
channel.
Conference reference out of range for audio rhythm stopping
Conference reference out of range or mismatch in the audio rhythm tables
Bcsref out of range for audio rhythm stopping
Unknown rhythm to generate for L3
Unknown bcs ref in Pr B channel admin. for rhythm generation
No port reference to port Id for LED blink
Error with port reference for Mup1S3T8Eset LED blink
Error with port reference for Mup V1, Mup1S1T4Eset LED blink
Error with port reference for Mup1S2T4Eset, Mup2S2T8Eset LED blink
Unknown MUP version for MUP LED blink
Error with port reference for left Module LED blink
No trunk LED for this Module on left side
Error with port reference for right Module LED blink
No trunk LED for this Module on left side
No trunk LED for OPT Modules
Error in LED jobs : more than Int8Max jobs for portled LTx
Error in LED jobs : no more jobs for portled LTx
Error has been detected in the DTMF sender
Invalid state
Invalid state
Invalid GB release type
Invalid GB release type
Invalid minor
Invalid channel number
Invalid channel number
Invalid channel number
Invalid port number
Dummy routine should not be called
Invalid major signal
tnaOldState should be TnaPrepInService
Invalid tnaOldState
Invalid tnaOldState
Invalid tnaOldState
Invalid tnaNewState
Invalid number of ringPhases
Invalid call port type
Port / b-channel combination already in the list of active bcsref's.
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
linked list of active bcsrefs is corrupted
invalid minor
Invalid Sp1DectHsP : Sp1DectHsTable not allocated
bad command type for Sp1ServInfoFromRbc
Invalid Rhythm Type for SP1 message generation
corrupted b-channel list
invalid startCh or stopCh
Sp1: wrong transmittermessage type detected.
Sp1: wrong transmitter port detected.
Sp1: wrong transmitter channel detected.
Sp1: wrong transmitter highway detected.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
18085
18086
18087
18088
18089
18090
18091
18092
18093
18094
18095
18096
18097
18098
18099
18100
18101
18102
18103
18104
18105
18106
18107
18108
18109
18110
18111
18112
18113
18114
18115
18116
18117
18118
18119
18120
18121
18122
18123
18124
18125
18126
18127
18128
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
Sp1: wrong transmitter timeslot detected.
Sp1: wrong receiver message type detected.
Sp1: wrong receiver port detected.
Sp1: wrong receiver channel detected.
Sp1: wrong receiver highway detected.
Sp1: wrong receiver timeslot detected.
Sp1: wrong clock port detected.
Sp1: wrong clock channel detected.
Sp1: message type unknown.
SP1 port/channel/highway/slot information is not consistent
SP1 port/channel/highway/slot information is double not consistent
18129
18130
18131
18132
18133
pr
pr
pr
pr
pr
18134
18135
18136
18137
18138
pr
pr
pr
pr
pr
prCheckFreeBchan: got wr
invalid start and/or stop-channel as parameter !
There is no valid ConfRef for this conference
Music not available.
unknown interface type while channel setup
Undefined port type - do not know what to display (external or internal)
Too many interrupts on analogue port or system is overloaded. This port is
blocked for 5 seconds.
No memory is left.
Timer is not expired.
No valid timeslot found for specified port and b-channel.
No valid portref found for specified port.
function called with wrong port-number
B-Channel Informationm not accessible.
invalid minor received
unexpected minor received
IE too small
unexpected port information coding in the case of extension coding
unexpected (unknown) infoelement within sp1-message
Invalid portId and/or chanId in message from RBC
Invalid info element size
Invalid connection type
Invalid info element type
Bad channel pointer for the given port and chan
modadm did not find port and channel to switch the b-channel
Error connecting dtmf to dect terminal
Error re-establishing original dect connection after dtmf
trying to delete a port which still has a relation
There is no Prima on this highway
dsp state A, still an assignement in local mirror.
dsp state B : not one assignement found in local mirror
dsp tries to go state C with same slot
dsp gos state C but no free channel found in local mirror
DSP on message received in state C or unknown state
dsp tries to deassign, but no assignement found in local mirror
channel to deallocate not found in local mirror
dsp state C, expected both channel assigned in local mirror
dsp state C, channel to deallocate not found in local mirror
dsp tries to deallocate in state A or undef state
An invalid state was selected for the analog port.
The wrong b channel was requested
The b channel was not idle
PortBChan pointer returned is NULL - Cannot dereference a NULL pointer.
Error Mapping PrTbxMenuEnuC to MaTbxMenuEnuC - undefined value
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
18139 pr
18140 pr
18141 pr
18142 pr
18143 pr
18144 pr
18145 pr
18146 pr
For this portref was already allocated a channel or several channels. But we can't
recover it because we don't know the old "PortInterfaceType". That means we
are "losing" channels.
incorrect parameter in dtmf sign received from switching
This is not a real error. This is only to log if that special case can happen
(Br27424).
DTMF receiver request failed. Parameter 1 with value 0: signal timeout, with
value 1: no transmitters available, with value 2: got no transmitter from Hd.
Fsk transmitter request failed. Parameter 1: Value 0: Signal timeout from Rm.
Value 1: No transmitters available from Rm. Value 2: Got no transmitter from
Cr/Hd. Value 3: Signal timeout from Cr. Parameter 2: Analog port number
Parameter 3: On/off param
FSK receiver request failed. Parameter 1 with value 0: signal timeout, with value
1: no transmitters available, with value 2: got no transmitter from Hd.
Undefined porttype resolved for the indication of a external, or internal call on the
PBX LED display. -> Nothing displayed. Parameter1: pref, Parameter2:
channelNr, Parameter3: portType
Undefined porttype resolved for clearing the indication of a external, or internal
call on the PBX LED display. -> Nothing cleared on the display. Parameter1:
pref, Parameter2: channelNr, Parameter3: portType
18158 pr
Undefined PortInterfaceType received for the initialisation of the b-channel
administration data structure, from PrBchServerC::setChannelAdm(). This port
gets no B-channel resources! Parameter1: pref, Parameter2: portInterfaceType
The sref index table could not be updated. Index (sref) not found, or object
reference does not match. Parameter1: sref, Parameter2: bcsref, Parameter3:
pref
The sref index table could not be updated, because none of both entrys (bcsrefs)
are in use. Parameter 1: sref
Attempt to allocate a B-channel with a bcsref which has already a B-channel
allocated! The parameters refer to the pref/chan which are already allocatd.
Parameter1: bcsref, Parameter2: pref, Parameter3: B-channel number
Ivalid start/stop B-channels passed for the B-channel selection on a primary T2
port. Parameter1: startCh, Parameter2: stopCh, Parameter3: pref
Invalid stop B-channel passed for the B-channel selection on a non primary port.
Parameter1: startCh, Parameter2: stopCh, Parameter3: pref
One B-channel resource reservation has been released by the garbage collection
in idle state. This channel has not been released in the B-channel administration
at the end of the call! Parameter1: bcsref, Parameter2: pref, Parameter3: Bchannel number
Reserve congestion tone detector resources request to local Rm timed out
Parameter1: AnalogPort
Switching request: allocate congestion tone detector. Response from Cr timed
out. Parameter1: AnalogPort, Parameter2: OnOffState
Congestion tone detector connect request: inAnalogPort owns already a requst
managed by this administration! disconnectDetector must have been missed. ->
Recover before connecting. Parameter1: AnalogPort
The congestion tone detector queue could not be rotated. No resource available,
altough we have just freeed/disconnected one resource. Parameter1:
AnalogPort of the waiting request, Parameter2: AnalogPort of the disconnected
request.
Congestion tone detector DSP resource couldn't be connected by Cr altough Rm
successfully reserved resources! Parameter1: AnalogPort
18159 pr
Parameter0 = 0: Can't destroy the AnalogAlertingSignal object. Parameter0 = 1:
Can't create the AnalogAlertingSingal object. Parameter2: Id of SmLocale.
18147 pr
18148 pr
18149 pr
18150 pr
18151 pr
18152 pr
18153 pr
18154 pr
18155 pr
18156 pr
18157 pr
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
18160 pr
18161 pr
18162 pr
18163 pr
18164 pr
18165 pr
18166 pr
18167 pr
18168 pr
18169 pr
18170 pr
20001
20007
20008
20010
20011
20012
20014
20015
20017
20029
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
20030 cr
20031 cr
20032
20034
20035
20039
20040
20041
20042
20043
20052
20054
20062
20063
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
Failed to create PrAnalogAlertingSignal instance
No SmLocale instance found when instantiating PrAnalogAlertingSignal.
A hanging entry in the srefTable has been found and released by the garbage
collection in idle state. This should never occur, and indicates a problem inside
the B-channel administration. Parameter1: sref, Parameter2: pref, Parameter3:
B-channel number
PrBchPortC::allocCh(): The selected pref/chan is not idle, parameters refer to the
already allocated channel: Parameter1: bcsref, Parameter2: pref, Parameter3: Bchannel number
PrBchServerC::allocCh(): B-channel allocation failed, parameters refer to the
parameters passed to this method: Parameter1: bcsref, Parameter2: pref,
Parameter3: B-channel number
We missed the response signal of RM resource reservation. It seems that the
timeout of osOseReceiveSigTmo function is too short. The reservation of this RM
resource is freed again if the reservation was successful. Param 1:
RmResourceTypeEnu; Param 2: 0 =
Allocation or deallocation of the dtmf resource isn't reentrant. We have to use
semaphores.
Fsk transmitter request failed. Parameter 1: Value 0: Signal timeout from Rm.
Value 1: No transmitters available from Rm. Value 2: Got no transmitter from
Cr/Hd. Value 3: Signal timeout from Cr. Parameter 2: Calling Bcs reference
Parameter 3: Analog po
Create Fsk transmitter announcement failed. Parameter 1: Bugreport index
Parameter 2: Calling Bcs reference Parameter 3: getSharedFskOnHookTrans() failed. Param 1: Error location Param 2: bcsref
value Param 3: 0
This minor isn't available in the switch of the function prAnaHighLayerEvent().
Param 1: Minor Id.
Unknown OSE signal received in General Call Bell Process -> Unknown Major
or Minor signal part!
Impossible relais number.
Impossible enumeration parameter for function call.
To many jobs in general call queue.
Unknown general call code.
No more jobs in general call queue.
Unknown fix rhythm or tones to generate
Unknown tone to connect to subscriber
Unknown bcsref in domain cr timeslot administration for diconnect tone
Wrong BcsRef to release the timeslot used in a point-point connection
The function can not change the value of the oldBcsref because it doesn`t exist
The function has not allocated the ring of the crSlotAdm for the passed portref
and bchan, at the initialization time
The timeslot for the passed portref and bchan, has not been allocated in the
crBcsrefActiv list
Parameter missmatch for building a conference
No free conference reference for building a new conference
Conf. member not hold -> Bcs ref not found in conference adm.
Unknown conference type to switch
No correct HW switching for rebuilding a conference
Subsriber is not free for building a call waiting conf.
No free conference reference for building a call waiting conf.
One of the two subscr. for Call Wait does'nt exist in timeslot adm.
Unknown One Way situation to disconnect
Unknown combination of ports for creating a conference
Unknown combination of ports for deleting a conference
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20064
20066
20067
20068
20069
20070
20071
20072
20073
20074
20075
20076
20077
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
No free conference reference for building a new Intrusion conf.
A bcsref is not in the Ts adm. for creating a conference
Subsriber is not free for building an intrusion conf.
Conferece garbage clear found a active conference or corrupted conf. datas
Fatal error in the timeslot administration
A subscriber for switch two way is not in domain cr timeslot adm.
Unknown bcsref in domain cr timeslot adm. for announcing situation
Timeslot switching for announcing is not possible
A subscriber for switch one way is not in domain cr timeslot adm.
Unknown type of function to disconnect OneWay
Unknown bcsref to disconnect OneWay
A subscriber for disconnect two way is not in domain cr timeslot adm.
Unknown bcsref in Cr timeslot adm. or tone or rhythm for switching tone
20078
20079
20081
20082
20083
20084
20085
20086
20087
20088
20089
20090
20091
20092
20093
20094
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
Unknown conf. ref. in domain Cr conf. adm. or rhythm or tone for switching tone
Unknown conference type for switching tones
For building a normal conference missing bcsref in timeslot adm.
For building a Call Wait conf. missing bcsref in timeslot adm.
For building an intrusion conf. missing bcsref in timeslot adm.
Not correct conference type for activate conference hold
invalid group or text number for courtesy text-time
invalid group or text number for courtesy text-time
This history state is not handled in crHrsSetHistorySP()
This history state is not handled in crHrsSetHistoryPP()
This history state is not handled in crHrsSetHistoryMP()
Unknown bcsref in domain cr timeslot adm. for rhythm generate
Unknown rhythm to generate for the subscriber
Unknown bcsref in domain cr timeslot adm. for hold situation
Subscriber disconnect error for hold situation
For unknown conference type no conf resouce check is possible
For deleting a conference the subsriber is not known in the conference
administration
For deleting a conference the subsriber is not known in the conference
administration
Unknown member in conference for deleting the conference
For unknown conference type no conference switching is possible
No correct HW switching for building a new conference
unknown or wrong courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
stop recording of a not actual bcsRef
unknown or wrong courtesy state in the cr-state-machine
stop playing of a not actual bcsRef
unknown courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
unknown minor
unknown or wrong courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
unknown or wrong courtesy state in the cr-state-machine
Timeslot switching for Courtesy play is not possible
Unknown bcsref in Cr timeslot adm. for Courtesy play situation
Timeslot switching for Courtesy music recording is not possible
Timeslot switching for Courtesy recording is not possible
Timeslot switching for Courtesy play is not possible
Unknown bcsref in Cr timeslot adm. for Courtesy record situation
20095 cr
20096
20097
20098
20099
20100
20101
20102
20103
20104
20105
20106
20107
20108
20109
20110
20111
20112
20113
20114
20115
20116
20117
20118
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20119
20120
20121
20122
20123
20124
20125
20126
20127
20128
20129
20130
20131
20132
20133
20134
20135
20136
20137
20138
20139
20140
20141
20142
20143
20144
20145
20146
20147
20149
20150
20151
20152
20153
20154
20155
20156
20157
20158
20159
20160
20161
20162
20163
20164
20165
20166
20167
20168
20169
20170
20171
20172
20173
20174
20175
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
Wrong signal Minor for timeout -> ignore the signal
Wrong signal Minor for general call -> ignore the signal
Unknown ring code : No General Call Bell activation
Wrong signal Minor for courtesy -> ignore the signal
There is an external board in a wrong position (Es: Exa12 in LEFT pos.)
Unable to allocate signal
ANALOG is switched out
DTMF decoder number is invalid
Invalid port number
Invalid port number
Invalid module
DTMF decoder number is invalid
Invalid LTA boardType
The DTMF decoder is not assigned
The DTMF decoder is not assigned
This dummy routine should never be called
Unable to switch musac for dtmf-receiver.
unexpected minor received
error allocating memory (out of memory, oseAlloc has returned NULL)
job received, but root pointer is not initializes
Dect sync signal could not be switched to the MUP of bcs64
MUP of bcs64 is unknown
too big groupnumber for a courtesy-start
corrupted queue. illegal bcsRef. not active bcsRef
Tone for this country could not be allocated.
Function getConfSlot: confP is pointer to NULL
Unknown Option Module detected by MUP3 VTC
Failed to Create IOM Timeslot pool
Failed to Allocate IOM Timeslot
Failed to determine IOM Timeslot for given Port/BCh
Failed to Deallocate IOM timeslot
Disconnect (VtcWrite) Not yet implemented for MUP3
Failed to Allocate Dummy PCM timeslot (VTC-MUP3)
MUP3 Conference - ZFK Connect Error
MUP3 Conference - Disconnect - Member Not found in conf list
MUP3 Conference - Zfk Disconnect Error
MUP3 Conference - Zfk Conf with Tone Error
MUP3 - Zfk Connect with Tone Error
MUP3 - Zfk Connect Error
If error converting a Hw and Ts combination into a Bcsref
rangecheck with handling of Highway and Timeslot
deallocation of a slot which was not allocated
allocation of a slow which is not free
In function sendDtmfSignToXa, no correct portref has been found
In function sendDtmfSignToXa not expected dtmfSign
a command issued from high layer, is not implemented (known)
array end of string overwritten
Error Mapping CrTbxMenuEnuC to MaTbxMenuEnuC - undefined value
should never reach here with more than 1 Dtmf Decoder in use
failed to map CrMonTestFlagEnu to XaMonTestFlagEnu
There is a resource problem.
tmo should be stopped at this position
unknown courtesy play mode
invalid group for courtesy play mode
there is a dsp problem
It is not possible to have more than 3 Dect channels
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20176 cr
20177 cr
20178 cr
20179 cr
20180
20181
20182
20183
20184
20185
20186
20187
20188
cr
cr
cr
cr
cr
cr
cr
cr
cr
Could not deallocate an allocated DSP resource
Could not disconnect a connected DSP resource
Could not connect an allocated dsp resource
The DSP resource looks like it is no longer allocated, and an attempt was make
to alter the resource without it being allocated.
An attempt was made to add or remove a party from a conference which was not
connected
Could not deallocate an allocated DSP resource
Could not disconnect an allocated DSP resource
Could no connect an allocated DSP resource
Could no connect an allocated dsp resource
Could no deallocate an allocated DSP resource
Could not disconnect an allocated dsp resource
Unexpected conference tone configuratio
The handsfree state is unexpected
20189 cr
20190 cr
There was an error with the handsfree request, this situation should never occur
The handsfree state is unexpected
20191
20192
20193
20194
20195
20196
20197
There was an error with the handsfree request, this situation should never occur
conflict in commandes
ace obj is in a strange state
Dtmf receiver functionality is not implemented for this port type.
No dtmf receiver available.
iom admin deals with wrong parameter......
Mute functionality is not implemented for this port type.
Attempted to mute a connection which wasn't connected. This is controlled by
the TP domain
attempted to unmute a connection which was already connected. This is
controlled by the TP domain.
Attempted to start mute, but mute was already started.
Attempted to unmute a connection which wasn't muted
A switching command called from courtesy failed
cr
cr
cr
cr
cr
cr
cr
20198 cr
20199
20200
20201
20202
cr
cr
cr
cr
20203
20204
20205
20206
20207
20208
20209
20210
cr
cr
cr
cr
cr
cr
cr
cr
20211
20212
20213
20214
20215
20216
20217
20218
cr
cr
cr
cr
cr
cr
cr
cr
20219 cr
20220 cr
20221 cr
No dtmf transmitter available. Dtmf digit is lost that means the dialling is wrong!
One of the courtesy switching commands failed
Handsfree was already active when startHandsfree requested
Handsfree was already inactive when stopHandsfree requested
A Conference connection was explicitly activated by higher layers
A Conference connection was explicitly deactivated by higher layers
problem with the connection id
switch object was not allocated
Switch object has already assigned a connection id. P1: read or write owner,
connection id which actually uses the switch object P2: connection id which
wants to manipulate the switch object P3: port reference (portRef)
The ConnectionId in the connection list does not match the Id given
Dect: Wrong ACE state to connect a tone.
No dtmf job is active, tmoCtr should be 0 (zero).
Invalid ISDN port type for ISDN ACE p1: portref p2: channel p3: 0
Incorrect signal received, signal ignored
Incorrect signal received, signal ignored
Switching error, incorrect state or parameters
Not enough mips for required resource Resource ID, Remaining Cycles,
Required Cycles
time slot range exceeded.
Handsfree functionality is not implemented for this port type.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20222
20223
20224
20225
20226
cr
cr
cr
cr
cr
20227 cr
20228
20229
20230
20231
20232
20233
cr
cr
cr
cr
cr
cr
20234 cr
20235 cr
20236 cr
20237 cr
20238
20239
20240
20241
20242
20243
20244
20245
20246
20247
20248
20249
20250
20251
20252
20253
20254
20255
20256
20257
20258
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
20259
20260
20261
20262
cr
cr
cr
cr
20263
20264
20265
20266
20267
20268
cr
cr
cr
cr
cr
cr
B Channel cannot be manipulated for this port type
DTMF signs cannot be transmitted for this port type /
Tones are not available for this port type
IP information does not exist for this port type
Cannot configure IP settings for this switch object
Cannot close a closed connection withing the connection manager. Parameters
contain no information.
Could not create a local connection. P1: Connection Id P2: no information P3:
no information
Failed to receive a response from CR in another node
Failed to receive a response from MR
Error creating object for satellite
Incorrect State change for satellite
Unknown Module encountered. Exiting function
length of CallerIdMsg to long Not used anymore. It can be deleted if this tool
has implemented that feature.
The DSP failed to respond to the last three requests with a receive acknowledge.
This indicates that the DSP is no longer responding. The dsp and all his
resources has been shut down. parameter0: own error id parameter1: slotId
parameter2: local dspId
idle timeslot is not disconnected !!
Tone variable is set. it is not allowed to switch tones for hdlc port.
a dummy interface implementation has been called. The ace has unexpected
type
Unknown signal minor for voice services (MajorVoice).
Invalid text number for this voice group.
Unknown or wrong state in the voice channel state machine.
Could not find the text id for the requested voice group/text.
Unknown voice hardware module or module not available.
Should not recive this signal for this hardware.
Request to start courtesy service with invalid voice group.
Invalid play mode for this voice group.
No play mode selectable for this voice group
Attempt to stop recording of a non active bcsRef.
Invalid text number for this voice group.
Unknown or unexpected voice group.
Invalid voice text id.
Invalid voice text number.
Not able to allocate a new voice text id.
Unknown or unexpected voice module type.
No voice text id defined for requested voice group and voice text.
Unknown voice service.
Invalid voice channel - Voice resources may possibly not be deallocated!
Invalid or unknown text type.
Could not close the directory stream. This could end with a crash because of
missing detaches.
Could not write the date/time in the file name.
File could not be removed.
Invalid command for this hardware.
Attempt to stop voice service for an invalid or inactive bcsRef - voice resources
may possibly not be deallocated.
Should always find a further voice mail message in this state.
Deleting an already deleted text.
undefined process identifier could not send dtmf sign
function sendMessageToXa is called with a Non-Valid parameter
Voice Memory - Erasing voice text failed.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20269
20270
20271
20272
20273
20274
20275
20276
cr
cr
cr
cr
cr
cr
cr
cr
Voice Memory - Copying voice text failed
Voice Memory - Unknown Voice Copy Return Code
invalid mailbox
Invalid hardware channel - Voice resources may possibly not be deallocated
Unknown or unexpected courtesy play mode
Unknown or unexpected voice service stop cause
Voice memory low.
Queuing voice service requests for this type of voice text is not supported.
20277
20278
20279
20280
20281
cr
cr
cr
cr
cr
Switching to tone, music or silence after listening courtesy text in hold failed.
Switching to tone or music after listening courtesy text failed.
Unknown switching type for courtesy.
Corrupted queue, invalid bcsRef or inactive bcsRef
Should not get into this state with a bcsRef != 0
20291 cr
Should not get into this state with bcsRef == 0 or bcsRef == NonValidBcsRef
Unknown or invalid courtesy service type
garbage collector has identified a remaining connection. The connection will be
killed
garbage collector has identified a remaining switch object. it will be deleted
Did not find valid start address for next voice text.
Voice Memory - Recording voice failed.
Voice Memory - Deleting voice failed.
Voice Memory - Playing voice failed.
switching situation ckeck failed (asserts replaced by errorReport) need to have
e switching trace to analyse this situation
assert replaced by errorReport. a value does not fit to present situation.
switching trace needed, as the real problem needs to be searched in an earlier
switching acivity
20292 cr
parameter channel out of range. this might cause serious switching problems
20282 cr
20283 cr
20284
20285
20286
20287
20288
20289
cr
cr
cr
cr
cr
cr
20290 cr
20293
20294
20295
20296
20297
20298
20299
cr
cr
cr
cr
cr
cr
cr
20300 cr
20301 cr
20302
20303
20304
20305
20306
20307
20308
cr
cr
cr
cr
cr
cr
cr
20309 cr
20310 cr
wrong route provided to connectTwo way. Now we have 3 nodes used!!?? p1:
inRouteId p2: inContextP->getNumOfNodes() p3: inContextP->getConnId()
unexpected signal received
Courtesy setting is not available for this csy group.
addToConnection: nodeId of new obj does not match any nodeId of the route
can not reserve timeslot, is already occupied
tried to free a slot which was not allocated (reserved slot)
tried to free a slot which was not allocated
Not able to send the music on hold settings to the Satellite. The linkhandler
could not send the signal.
Not able to create a persistant music on hold object.
Could not close the directory stream. This could end with a crash because of
missing detaches.
No valid file found for music on hold.
Could not remove music on hold wave file.
Could not rename music on hold wave file.
dect port channel is not yet available
Handsfree functionality is not implemented for this port type.
B Channel cannot be manipulated for this port type
DSP interrupt did not receive wave data in time for playback. Playback has been
stopped.
No valid port pointer found in the Init function of an ACE. Param 1 is the AbsPort,
Param 2 is the found pointer (the casted pointer is NULL). Param 3 is 0. Of
course this should never happen!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20325 cr
20326 cr
Not able to find the mailbox to delete.
No process id for this alert tone detector.
No process id for this alert tone decoder.
No process id for this Fsk receiver.
No process id for this Fsk sender.
Attempt to stop greeting for an invalid or inactive bcsRef. Voice resources may
possibly not be deallocated.
Didn't find a valid mailbox for the active channel.
The wave player suddenly is stoppped because of a problem of the file system or
dsp interface. We have to start again 'music on hold' because of the bugreport
BR31713 (After a few days music on hold doesn't work).
Auto Attendant: No action from Xa after end of greeting.
Auto Attendant: Should not receive "SetVoicemailIdle" signal in this state
(collision).
Signal has been delayed several times but still did not receive expected signal
from hardware. Param1: minor of delayed signal Param2: channel state
Param3: channel stop cause
Unknown response form function checkDelaySignal. Param1: minor of signal
to delay Param2: channel state Param3: channel stop cause
CrDspInterfaceC::getResourceCount() recived a response with a wrong slotId
and/or a wrong dspId. Parameter1: slotId Parameter2: dspId
Fsk demodulator, Fsk modulator or dualtone alerting signal generator isn't
implemented for this derived class type. Parameter0 port reference. Parameter1
channel.
A DSP has detected a TDM error. Param1: DSP ID Param2: Highway
Param3: TDM error ID
Failed to allocate virtual timeslot
20327 cr
Unexpected switching state in function dis/connectRxTs or dis/connectTxTs.
Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID.
20328 cr
Unexpected switching state in function dis/connectRxTs or dis/connectTxTs.
Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID.
20329 cr
Unexpected switching state in function dis/connectRxTs or dis/connectTxTs.
Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID.
20311
20312
20313
20314
20315
cr
cr
cr
cr
cr
20316 cr
20317 cr
20318 cr
20319 cr
20320 cr
20321 cr
20322 cr
20323 cr
20324 cr
20330 cr
20331 cr
20332 cr
20333 cr
20334 cr
20335 cr
20336 cr
Unexpected switching state in function dis/connectRxTs or dis/connectTxTs.
Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID.
Build a way point failed. A way point is used to connect 2 nodes in an AIN. The
given port has to be of type SmPortInterfaceTypeC::Rtp (MBS/MBL/MBA) or
SmPortInterfaceTypeC::Aip (MBS/MBL). If this error log is raised, the type of the
given port is wrong
DSP doesn't provide the required amount of a resource. Param. 1: Resource
type (CrDspResourceEnumC) Param. 2: Resource count on the DSP Param. 3:
Required amount of this resource.
CrSwiContC received MajorWdog signal with unexpected minor
Response to service request signal was received too late
H2M configuration can not be set. The number of H2M highways is not as
excpected. p1: (UInt32)CrConH2mHighwaysMax p2:
(UInt32)inHighwayConfig.numberOfH2mHighways p3:
(UInt32)inHighwayConfig.ok
H2M configuration can not be set. The retrieved configuration is not valid. p1:
(UInt32)CrConH2mHighwaysMax p2:
(UInt32)inHighwayConfig.numberOfH2mHighways, p3:
(UInt32)inHighwayConfig.ok
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
20337 cr
20338 cr
20339 cr
20340 cr
20341 cr
20342 cr
20343 cr
20344 cr
20345 cr
20346 cr
20347 cr
20348 cr
20349 cr
20350 cr
20351 cr
20352 cr
20353 cr
20354 cr
20355 cr
24001 sc
24002 sc
H2M configuration could not be set. This could lead to noisy connections as
reserved timeslots will be reused! p1: h2mHighwayConfigP
H2M configuration could not be retrieved from the hardware initialisation. This
could lead to noisy connections as reserved timeslots will be reused! p1:
h2mHighwayConfigP
Failed to write switching monitor log file. Data will be missing in the log files!!
A DSP channel was not ready to handle a command. Parameters: 1: DSP Id, 2:
DSP replyword 0, 3: DSP reply word 1.
The requested number of VoIP/T.38 channels for one DSP exceeds the
maximum defined in myMaxT38Processing resp. myMaxRTPProcessing
(crdsptypes.hh). Parameter 1: 0 == VoIP, 1 == T.38 Parameter 2: Max number
of channels Parameter 3: Requested number of cha
could not create directory to store switching trace files p1: errno p2: 1 /home/logs could not be created
2 - /home/logs/swi could not be created p3:
0
MSCU VAPI init failed -> EIP1 modules can not be used Param1: VAPI Result
Error Code Param1: - Param1: MSCU initDevice() error -> EIP1 modules can not be used EIP1 Port is invalid.
Param1: HD Port Id Param1: - Param1: MSCU initDevice() error -> EIP1 modules can not be used EIP1 device ID is
invalid! Param1: Hd Port Id Param1: EIP1 device ID (0..8) Param1: MSCU bootDevice() error -> EIP1 modules can not be used EIP1 boot or
firmware download failed! Param1: Hd Port Id Param1: EIP1 device ID (0..8)
Param1: MSCU connectIpMedia() failed. Param1: EIP1 device ID (0..8) Param1:
ResourceId Param1: VAPI Result Error Code
MSCU EIP1 Heart Beat timeout. MSCU did not receive or process a heart beat
within the expected period (6s). This might be a temporary problem only. If no
Hearbeat is received for more than 60s, the EIP1 will be restarted (ErrorId
20355). Param1: EIP
MSCU EIP1 firmware download failed! The EIP1 firmware is not available in the
PBX filesystem! The firmware should be available (e.g.
/home/sw/eip1_v7_22_0.axf). Param1: EIP1 device ID (0..8) Param1: Param1: MSCU EIP1 Heart Beat Status Error. The EIP1 heart beat did indicate an error.
Param1: EIP1 device ID (0..8) Param1: Compcerto Diag. Result Param1:
Comcerto Alert Type
MSCU EIP1 device object not found Param1: EIP1 device ID (0..8) or SM Port
Ref Param2: Location in source code Param3: 0 or channel number
Init/boot EIP1 device failed because of an invalid IP-Address. DHCP did not
provide an IP-Address for this EIP1. Param 1: Port ID Param 2: Device ID
Param 3: Timeout while init/boot EIP1 device. Param 1: Port ID Param 2: Device ID
Param 3: MSCU VoIP/FoIP disconnect error. Param1: Resource ID Param2: Location in
source code (0..3) Param3: VAPI result (0=SUCCESS, -68000=undefined, 68xxx=errorId)
MSCU EIP1 Heart Beat Error after several timeouts. The EIP1 did not send a
heart beat for more than 60s. Switch EIP1 state to error and let SM restart the
EIP1 now. All VoIP/FoIP calls on this EIP1 will be lost. Param1: EIP1 device ID
(0..8) Param1:
too long string
the string that was passed to v24printf exceeds 200 characters!!!! please correct
corresponding call of v24printf and not the internal maximum.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24003 sc
24004 sc
24005
24006
24007
24008
24009
24010
24011
sc
sc
sc
sc
sc
sc
sc
24012 sc
24013
24014
24015
24016
sc
sc
sc
sc
24017 sc
24018 sc
24023 sc
24030 sc
24031
24032
24033
24034
24035
24036
24037
24038
24039
24040
24041
24042
24043
24044
24045
24046
24047
24048
24049
24050
24051
24053
24054
24055
24056
24057
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
It was not possible to transmit the ServiceData over V24. After waiting a long
time the signal was thrown away, and a ServiceDataAck was sent back. I dont
think this is a software problem. Probably somebody pulled the V24 cable or the
transmission chip is
V24-Problem: The Receiver throws away the latest received signal because
the high layer processes did not ackknowledge the configurable
number
of ServiceData signals (at the moment this value is 30).
ACTION: the
V24 n
Signal was thrown away! This is a serious problem and you should investigate. If
you don't find anything, then talk to me (Franz Brandl, 31301).
Alarm: Synchronisation loss
Alarm: Alarm Call > Expired
Alarm: CDA > Printer blocked
Alarm: ICC > Overflow
Alarm: Too many ports
Alarm: Report Error
Number of location areas is not an allowed value It should be 8 (max id 7), 16
(max id 15) or 32 (max id 31) param 0 gives its current (invalid) value
There is a little bit strange text in the textpool with a length greater than
MaxInfoTextLen (84)
Code should not have reached default clause in case
writeHeader should not have reached default case
Possibly invalid portRef
System base board - port (in error params) gives FALSE for
scRdbGetSysBaseName
System base board - port (in error params) gives FALSE for
scRdbGetSysBaseLocArea
scRdbSetLocAreaName returns FALSE for loc area in error param 1
scRdb call returns FALSE for msn in error param 1
scRdbGetHandsetState returned FALSE for msn and naster board in error
params
scRdbSetAccessCode returned FALSE
scRdbGetSysBaseLocArea returns FALSE
scRdbGetMaxLAId returns FALSE
scRdbGetSysBaseLocArea returns FALSE
scRdb call returned FALSE
scRdb call returned FALSE
Incorrect CASE value in switch statement
scRdb call returned FALSE
scRdbGetSysBaseName returned FALSE
scRdbGetSysBsaseLocArea returned FALSE
scRdbSetSysBaseName returns FALSE
scRdbGetMaxLAId returned FALSE
scRdbSetSysBaseLocArea returned FALSE
scRdbDeleteSysBase returned FALSE
scRdbSetBitset returned FALSE
scRdbSetBitset returned FALSE
scRdbSetBitset returned FALSE
scRdbDeleteHandset returned FALSE
scRdbDeSubscribeHandset returned FALSE
scRdbDeSubscribeHandset returned FALSE
portRef could not be translated to board-port
returnStatus not an expected value
unexpected Minor signal
Unexpected Major signal
unexpected enum value
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24058
24059
24060
24061
24062
24063
sc
sc
sc
sc
sc
sc
24064
24065
24066
24067
24068
24069
24070
24071
24072
sc
sc
sc
sc
sc
sc
sc
sc
sc
24073
24074
24075
24078
24080
24081
24082
24083
24084
24085
24086
24087
24088
24089
24090
24091
24092
24093
24094
24095
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
24096 sc
24097 sc
24098 sc
24099
24100
24101
24102
24103
24104
24105
24106
24107
24108
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
24109 sc
24110 sc
unexpected enum value
unexpected enum value
unexpected enum value
unexpected enum value
unexpected enum value
DECT handset FACs should not be here, as they should have already been
handled in write_interface_type_line
Could not turn subscription allowed off in the location area
Unexpected handset subscription value
service not known
couldn't find service for the new socket
sockP or sockP->servP is NULL
unexpected signal received
unexpected type of interface
already a ServiceStat pending
DECT timeout message number is invalid. Should be a null terminated string
scIohReadSocket: invalid pointer
Default language could not be initialised for this country.
No text string is defined for this language.
Unexpected enumeration value
Unexpected Telemaintenance permission during telemaintenance access
No product name string associated with this salesChannel.
Default message text definition for this language is too long.
value of ioLanguage does not match one of the current four languages
invalid language value - default language substituted
Language invalid - using default language
Alarm: telemaintenance enabled
Unexpected enum value
Unexpected enum value
Unexpected enum value
unexpected enum value
Unexpected enum value
unexpected enum value
Unexpected error value
telemaintenance switch unexpected value
During upload, we received too much datas which will not fit in KDM space. We
throw them away. Was this an upload with an AVM Fritz! card?
This combination of flags should never occur
AIMS request contains an invalid set type.
The sendAllowed signal should never be received in the case of a Delivery
Confirmed socket
Size of buffer for AIMS response has been exceeded.
A unrecognised signal is at the commit handler interface.
man_io_cb.abort_cause maybe unknown.
Variable time is NOT initialised.
There isn't a valid application in DRam.
Can't open a file!
Compression didn't finish successfully.
Can't close this file!
fwrite wasn't successful!
A problem with the Db occured. Most likely it wasn't possible to create a new
object.
An error occured while trying to access the database for a unique entry to set
TeleMaintenance permission.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24111 sc
24112 sc
24113 sc
24114
24115
24116
24117
24118
24119
24120
24121
24122
24123
sc
sc
sc
sc
sc
sc
sc
sc
sc
sc
24124 sc
24125 sc
24126 sc
24127 sc
24128
24129
24130
24131
sc
sc
sc
sc
24132 sc
24133 sc
24134 sc
24135
24136
24137
24138
sc
sc
sc
sc
24139 sc
24140 sc
24141 sc
24142 sc
24143 sc
24144 sc
24145 sc
24146
24147
24148
24149
24150
24151
sc
sc
sc
sc
sc
sc
error in finding in the database the Telemaintenance permission status.
This function should be called for to create abbreviated dialing numbers and
nothing else ' .
This function should be called for to create network sub. and nothing else
Error while trying to find a unique an ArSingleInstanceIdC in the database in
scCheckTeleMaintenance
Database count of instances greater than maximum specified limits.
SW-upload alarm: SW update will take place later (date and time given)
SW-upload alarm: SW update successful (no crash durig supervisory time)
Time/Date string corrupt.
The filename in the file list does not match the actual file stored
The file in the sw mgr is not present in the file list
The sw mgr is invalid
There was no file to roll back to.
can't execute the event, no proper state has been set
Unexpected event for this state of scUscC. First parameter is the event code
based on the scUscC::Event enum. Second paramaeter is the location in the
code.
Unrecognised ASNMP message received by AIMS on PBX side
Size of buffer for AIMS request has been exceeded
Alarm: Uploaded SW crashed during supervision time. Old SW has been
restored (rollback has been performed).
The ScUsc wasn't able find a file name passe on via HwiComm from the boot
SW. The boot SW must always set thi info block.
Not possible to create a SwMgr.
There's no SW manager in the DB.
We must not start-up with ResetPending.
The validity check of the SwMgr failed. The SwMgr contains at least one file
name which doesn't exist in the file system.
Error Mapping ScTbxMenuEnuC to MaTbxMenuEnuC - undefined value
If the PBX starts-up in this state, this indicates a failed SW change which wasn't
detected by the boot SW. This indicates a serious RUL problem. Luckily the PBX
shouldn't have a problem to do its job.
This indicates an endless loop. Perhaps we have a serious file system problem
(file deletion impossible!)
File creation impossible.
Wrong enum value for switch statement.
The ascotel string doesn't fit into the charachter string.
Get command proceeded, but the database or DIRE cache is in an inconsitent
state! A fisrt start is recommended.
the NPI cache is not up to date
The NPI cache is not up to date!
scIohFlushServiceDataDownstream() has both destinationP and serverSockP
set to NULL! Cannot send data.
Could not find a hotline instance in spite of a valid ID -> database inconsistant!
Instance not found -> inconsistant database -> crash
DectSetup or DectNetwork single instance not found: inconistant database
We had to create a hotline instance. This means, someone destroyed this
instance, which is not allowed anymore!
Someone has deleted a hotline instance. This is not allowed anymore!
Error id for enum mapping of XaNumAnalEnuC type.
Error id for enum mapping of ScNumAnalEnuC type
Transaction failed: User related data might not be deleted properly
Transaction failed: User related data might not be deleted properly
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24152 sc
24153 sc
24154 sc
24155 sc
24156 sc
24157
24158
24159
24160
sc
sc
sc
sc
24161
24162
24163
24164
24165
24166
24167
24168
sc
sc
sc
sc
sc
sc
sc
sc
24169
24170
24171
24172
sc
sc
sc
sc
24173
24174
24175
24176
24177
sc
sc
sc
sc
sc
transaction failed while moving the subscriber to another port. the number is the
means the oldAd2PortId
During the deletion of subscribers, a dire object was detected which contains an
empty Number attribute. This should not happen.
The switchGroupType was not correctly set in the callDistribution. This shuold
never happen. It seems that the DS has a problem. The number in the error msg
isthe callDistId.
hash table for the numberingplan is corrupt. A restart is recommended. The
number in the error log is the subs number which was not foung.
the scHotelSetup instance was not found. Restart System. There are two
possibilities, someone changed the Re-/Firststart behaviour or the DS is
cporrupt.
problem while deleting a subscriber. Parsing through the user groups cuased
this error report. The number is the subsId of the subscriber.
Old app file did not delete after supervision ended.scusccont.cc:1618
Database backup did not delete after supervision end.scusccont.cc:840.
Failed to find SW manager object!!line 824.
24180 sc
Writing the file with the changed Ethernet IP settings failed: The next firststart will
reset Ethernet IP address, subnetmask and gateway to factory settings!
Single instance not found -> corrupt database!
Single instance not found -> corrupt database!
AccessLevel instance not created -> corrupt database!
Setup single instance not found -> corrupt database!
Expected object not found -> database corrupt
Global variable modify_process has an unexpected value.
Unknown kindofTerminal type
Could not close the directory stream. This could end with a crash because of
missing detaches.
Couyldn't find HDLC Terminal Adaptor object in the databse
Mistake...
Unexpected Start signal received.
Unexpected data within ScIohClientSocket::handleData(), currently (i6) there is
no need to handle data because this socket is used for outgoing data only.
Remove this error report if you are going to develop more functionality to this
socket.
Failed to open the downsream interface
Call to listen failed
generic errorid for the SC domain
ScAimsBuffer::transmit() failed to send the buffer.
A port type which is not handled by AIMS has been presented to AIMS. Port type
(SmPortInterfaceTypeC) is stored in parameter 1.
for some reason I encountered a crash; the request of PC-COMLIB was
HANDCRAFTED, i.e. in reality this possible crash would maybe not occur at all,
but who knows..
inconsistent database for some reason, please have a look into br18353, 18535
and 20445: for some strange reason there exists an subscriberinstance without a
directoryentry
24181
24182
24183
24184
24185
24186
24187
see br21003 the highest one. INTERNAL PBX PROBLEM, PLEASE REPORT !
scIohAlarmTrace() P1 is the location of the alarm (line number in scioh.cc)
scioh tried to create a second DlDestination instance
unhandled write status
destinationP is NULL
Reference count tried to go negative
New PortAssignment didn't work correctly
24178 sc
24179 sc
sc
sc
sc
sc
sc
sc
sc
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24188 sc
24189 sc
24190 sc
24191
24192
24193
24194
sc
sc
sc
sc
24195 sc
24196 sc
24197 sc
24198 sc
24199 sc
24200 sc
24201 sc
24202 sc
24203 sc
24204 sc
24205
24206
24207
24208
sc
sc
sc
sc
24209 sc
24210 sc
24211 sc
24212 sc
24213 sc
to track down the problem with br22936, this error-id was introduced: now this
error happens (warning) everytime a datatransmission to the AIMS-application
(via DL od course) fails.
report failure of a table-creation
Unexpected active alarm.
The length of the message is too long! Make it shorter in order to have a chance
to display it.
Failed to find location
Failed to get slot ID
Not able to delete Voice Mailbox.
The resetDateTime in the software manager object couldn't be updated. If a
reset occurs, the node will certainly perform a rollback.
Generic error: default-path in switch case
After an upgrade, an IP phone came up with the same software as before. It
shouldn't happen. It can be that the application file doesn't correspond to the
application version stored in the database.
The Software Manager is in the state "UpdateRunning or UpdatePending" but the
UpdateDateTime is set to default. This situation should not happen. In this case
save the time given by the AIMS Upload Manager has to be taken and be saved
in the database.
Software Upload Software Upgrade Manager: Transaction writing to database
failed. The first parameter is numbering the different locations.
Software Upload Controller: Transaction writing to database failed. The first
parameter is numbering the different locations.
A satellite is registering at the master after the end of supervision time. This
means it has been registered and commited without any supervision. Usually it
will be in normal running state after this. NodeId is in the first parameter.
A satellite missed the commit at the end of supervision time. It will remain in the
supervision running state, and when crashing will roll back to old software and
disappear out of the AIN. NodeId is in the first parameter. If this error is followed
by an
Software Upgrade. Satellites are missing at the end of supervision time. Then, all
satellites a master knows are expected to be registered and working. If some do
not, this alarm is generated. Parameter 1: Total number of satellites missing.
Parameter 2: N
Database Object not present. Some evil force has removed a sinlge instance
persistent object. Parameter 1 numbers the error locations.
Valid TpTerminal, BoardId, portNr, msnId, XaDevice, XaSubscriber BUT no
XaDirectoryEntry (in order to track down br32007: Crash in XA while configuring
with AIMS) Parameter 1: XaSubsIdC
Bad row accessor in 'saveRowData' method
Subscriber instance not found
storeSwitchValues() unknown or not allowed number as subscriber
Sending a trunk configuration signal to an analogue trunk port is impossible
because building the packet failed. Param 1: Port reference Param 2: Trunk ID
Param 3: Code location (0..1)
Internal error. Use parameter #2 to find the location.
Configured role for this DSP device is inconsistent. Param1 : DSP board
(nodeId, slotId). Param2 : DSP deviceId. Param3 : DSP configured role
In function mapXaEnumToMdtEnum, an unhandled value of
XaNotReachableDestTypeC was received to convert. The first parameter is this
value.
In function mapMdtEnumToXaEnum, an unhandled value of
UnreachableDestTypeEnum was received. The first parameter is this value.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24214
24215
24216
24217
sc
sc
sc
sc
24218 sc
24219 sc
24220 sc
24221 sc
24222 sc
24223 sc
24224 sc
24225 sc
When trying to renumber a subscriber, the new number could not be stored. This
was because the corresponding directory entry instance could not be found. The
first parameter is the XaDireIdC value.
Subscriber or Terminal don't exist
Unknown Signal - MajorScCfg, Minor unknown. Param 1: minor
Unknown Signal - MajorFm, Minor unknown Param 1: minor
Failed to generate 5xi configuration template file. Param1: 0 = aastra.txt, 1 =
mac.txt
casting from tpTermId to XaTermId. tpTermId is not valid in XaTermId.
a key associated to a terminal has been found BUT no line is associated to it
parameter P1: terminal ID parameter P2: key ID reference: br40147: Crash
during upload PC > PBX
https://wapps1.pbx.aastra.com/webadbt/WebADBT?tool=bugrep&cont=view&nu
mbe
Could not open config file for generation from template. Param1: 0 =
aastra.cfg, 1 = <mac>.cfg
Failed to open existing 5xi configuration template file. Param1: 0 = aastra.txt, 1
= mac.txt
Could not create mac.cfg - no valid mac address found for terminal. Param1:
termId
Signal MajorScCfg - invalid Parameter. Param1: minor Param2: termId
Someone request a partial wildcard which is not yet (re-)implemented
parameter 1: table id
24241 sc
Delete request timer for mac.cfg file expired! The PBX tried to delete a mac.cfg
file but did not receive a confirmation from the file system within 30 seconds.
Delete request timer for mac.cfg file expired but was not found in the list of
running timers. This should never happen.
Unknown timer expired.
Try to re-generate the mac.cfg file of a terminal which is not in the list of known
Aastra SIP terminals.
File to delete is already in the list of files to delete.
method called in a wrong state P1: myState {Idle, Backup, AwaitReset,
RestoreDialog, Restore}
failed to setup swManager for restore operation
Could not open file in file system
Web client tried to access an MDT using an invalid parameter. P1=tableId,
P2=fieldNum, P3=value (save only)
Web config tried to access an invalid column. P1=tableId, P2=col
Invalid table id. P1 is the table id.
unknown escapeMode for the output to the webserver. 0=NoEscaping
1=Escape for Javascript 2=Escape for Html
backup_info tags mismatch which lead to "Restore => Aborted" parameter P1
tags are coded bitwise, where bits are 0x01 tag Web config 0x02 tag
Database Id 0x04 tag Pbx Type 0x08 tag hardware board 0x10 tag hardware
port Example: 0x18 stands
ZIP file name in class variable "myZipFile" is empty - so it is not possible to
delete the temporarily stored ZIP file.
Someone tried to assign a reference id to a port, but the corresponding directory
entry has got no number (example: set relay reference number prior setting a
relay number)
failed to remove file Parameter 1: errorno, Parameter 2: filename(...CCCCcccc),
Parameter 3: filename(...CCCC).
24242 sc
24243 sc
Major signal MajorScCfg -invalid parameter. Param1: minor Param2: termId
Could not open config file for generation from template.
24226 sc
24227 sc
24228 sc
24229 sc
24230 sc
24231 sc
24232 sc
24233 sc
24234 sc
24235 sc
24236 sc
24237 sc
24238 sc
24239 sc
24240 sc
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24244 sc
24245 sc
24246 sc
24247 sc
24248 sc
24249 sc
24250 sc
24251 sc
24252 sc
24253 sc
24254 sc
24255 sc
24256 sc
24257 sc
24258 sc
24259 sc
24260 sc
24261
24262
24263
24264
sc
sc
sc
sc
24265
24266
24267
24268
sc
sc
sc
sc
24269 sc
24270 sc
24271 sc
24272 sc
24273 sc
24274 sc
24275 sc
Failed to open existing AaIp configuration template file.
Could not create localdb.config.mac-aa-ip.cfg - no valid mac address found for
terminal.
File to delete is already in the list of files to delete.
Try to re-generate the mac.cfg file of a terminal which is not in the list of known
Aamadeus Ip terminals.
Failed to open/write DoBackupFileFileName.
Copying backup file from web/.. <filename> to backup/tmp/<filename> failed
parameters store the last part of the filename
Unexpected / unknown signal or parameter in the signal. Parameters: 1. minor
(major is always MajorFm) 2. unexpected parameter (or 0 if the whole signal is
unexpected/unknown)
Unable to create the TLS directory stucture Param1: Dir index
File system function call failed
TLS certificate update failed. Parameter1: 0= Aastra Endpoint, 1= 3rd PTY
Certificate (1st Byte) If Par. 1 (Bit 0-7) = 1 then: Parameter1 (Bit 8-31) :
CertificateName (1st 3 Chars of the CertificateName) Parameter2: If Par. 1 (Bit
0-7) = 0 then: Param
TLS certificate expires soon. Parameter1: 0= Aastra Endpoint, 1= 3rd PTY
Certificate (1st Byte) If Par. 1 (Bit 0-7) = 1 then: Parameter1 (Bit 8-31) :
CertificateName (1st 3 Chars of the CertificateName) Parameter2: If Par. 1 (Bit
0-7) = 0 then: Parame
Failed to transfer Auto Backup File via FTP to remote server
Calculation of next backup file distribution was called with an invalid frequency
value
Timeout waiting for a response signal
Could not create tftp directory.
Failed to remove an unmanaged file in the import certificate directory. It may be
that this file is an expired certificate, in which case OpenSSL may get confused.
p1, p2, p3: First 12 chars of the file name in hex.
Someone attempted to modify the public PBX certificate. p1,p2,p3: The first 12
chars in hex of the name of the file that tried to overwrite the public certificate.
Unable to generate the PBX certificate. This means that no TLS connections to
the PBX can be established.
The PBX certificate will expire soon. p1: days to expiry
Problem in SIP node related signal. See parameter for exact location.
Unable to resolve SIP node domain name to a valid IP address
Someone is tampering with an imported certificate file (see param for details)
request to make a backup failed
67xxi - No valid MAC address to generate config file.
AaIp - No valid MAC address to generate config file.
Could not append the device to the device list! (This should never happen as we
have checked the list for this device before)! Param 1: deviceId
Device not found! Can't remove device! Param 1: deviceId
Could not add user to the user list! (This should never happen as we have
already checked the list for this user before we created it.) Param 1: userId
Param 2: identifies call location of this error report
Found an association for this device but the user is invalid! Param 1: deviceId
Param 2: userId Param 3: identifies the call location of this error report
Signal MajorScCfgDev - invalid Parameter. Param1: minor Param2: deviceId
Param3: identifies the call location of this error report
Failed to open file.
Failed to open existing configuration template file.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
24276 sc
24277 sc
24278 sc
24279 sc
24280 sc
24281 sc
24282 sc
24283 sc
24284 sc
24285 sc
24286 sc
24287 sc
24288
26001
26002
26004
sc
st
st
st
26005 st
26006 st
26007 st
26008 st
26009 st
26010 st
26011 st
26012 st
26013
26014
26015
26016
st
st
st
st
26017 st
26018 st
Failed to generate configuration template file.
Could not create /home/tftp directory. Param1: errno
Could not find an Instance of an OIM object
The ScCfgProcC on a satellite received a NodeInService signal. This should
happen way before it reaches its handleSig() method, e.g. in its prelude.
Restore or make a backup file: restoring/backuping TLS certificates failed
Zip file handling error (open, close)
Not all DDI numbers of this AMCC instance have the same DDI plan Param1:
cdeId Param2: ddi plan of the others Param3: ddi plan of the ddi number
associated with the CDE of param 1
SIP remote node already exists. Why? Param1: amccId Param2:
sipRemoteNodeId
New PBX TLS certificate generated. Update non-Aastra SIP devices.
TLS Certificates must be re-generated due to IP-Address change
Report an Error/Warning during call of wildcardGetRequest Param1 table ID
Param2 ScAIMSErrorTypeEnu Param3
The Master config is not the same as the Satellite config. See param for concrete
inconsistency.
The configured IP address of an EIP module has been changed via AMS or
webAdmin so all active VoIP connections using this EIP have been lost. Param1
is the EIP slotId, param2 is the subSlotId and parem3 the new IP address (a
value of zero means DHCP is en
Call logging default values could not be initialised for this country.
Send array overflow.
Call Data Write Error
The charge acquisition block for call logging in stChargeCompletion was not
found.
During the a warmstart there are missing charge related objects as individual
charge counter, surcharge curve, surcharge range, charge specification and
charging alarm.
error mapping StNumAnalEnuC to XaNumAnalEnuC
error in the mapping of XaNumAnalEnuC to StNumAnalEnuC in
xaToStMapNumAnalEnu [D [D [D (defaut switch).
The address of a SemiPersistent CAQ block is not found! This errorid only
exists in i5 and pre-i5 software releases. For external calls the software
generates a tax ticket, which contains all the charge information for later printing
in various forma
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found (for this subscriber,cost centre, trunk or channel
group) in the database. Was there a problem during firststart?
The enum of «TransferModeC» has been extended without adapting all the
switch statements that make use of it
the enum of the class «ChargingStateC» has been extended without adapting all
the switch statements that make use of it
The enum of the class «XaAccountTypeC» has been extended without adapting
all the switch statements that make use of it
The address of the SemiPersistent CAQ block is no good
The St Spooler State Machine got an unexpected event.
There is already a running timer, but only one is allowed.
On system startup, specifically st-domain startup, it was detected that the
number of «XaIndividualChargeCounter» database objects does not correspond
to the required value. The database lost some ICC objects.
On system startup, specifically st-domain startup, the call to the method
«findNumberOf()» of «XaIndividualChargeCounter» database object failed.
What's wrong with the database?
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
26019 st
26020 st
26021 st
26022 st
26023 st
26024 st
26025 st
26026 st
26027 st
26028 st
26029 st
26030 st
26031 st
26032 st
26033 st
On system startup, specifically st-domain startup, it was detected that the
number of either the «XaSurchargeCurve» or the «XaSurchargeRange»
database objects did not correspond to the required value. The database lost
some ICC objects. The missing objects
In function «copyCaqDramToNewFlash()», which is called by
stChgChargeCompletion(), the pointer to the semipersistent charge acquisition
object was found to be NULL.
In function «stChgChargeCompletion()» the pointer to the semipersistent charge
acquisition object «caqSpP» was found to be NULL. Taxes maybe lost!
In function «stChgChargeCompletion()» the pointer to the semipersistent charge
acquisition object «caqSpP» was found to be NULL. Taxes maybe lost! (second
occurence in func)
In function «mustBeJournaled()», which is called by stChgChargeCompletion(),
the pointer to the semipersistent charge acquisition object «caqSpP» was found
to be NULL.
In function «newSession()», the call to stChgChargeListAppend() failed. As a
consequence we can get a new semipersistent charge acquisition object to store
the taxes!
In function «makeSplit()», the call to stChgChargeSearch() for --Outgoing-failed. As a consequence we can get a charge acquisition object to store the
taxes!
In function «makeSplit()», the call to stChgChargeSearch() for --Incoming-failed. As a consequence we can get a charge acquisition object to store the
taxes!
In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeBusiness-- An
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found in the database. Was there a problem during
firststart?
In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeData-- An
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found in the database. Was there a problem during
firststart?
In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeCostCentre-- An
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found in the database. Was there a problem during
firststart?
In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeTrunk-- An
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found in the database. Was there a problem during
firststart?
In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeTrunkPrimary-- An
«Individual Charge Counter» object (XaIndividualChargeCounter) had to be
created as none was found in the database. Was there a problem during
firststart?
The method StSpoFormatDataC::formatTime converts the «duration» in seconds
of a call into hours, minutes and seconds. The output formats only support
strings of the format «ddHddMdd», where d is in the range 0..9 As a
consequence, we can not handle duratio
The function computeDuration() calculates the duration of a call in seconds and
stores it using the method setDuration(). Later when printing, we can only print
duration values up to 360000 seconds, which fit into the output format
«ddHddMdd», where d is i
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
26034 st
26035 st
26036
28001
28002
28003
28004
28005
28006
28007
28008
28009
28010
28011
28012
28013
28014
28015
28016
28017
28018
28019
28020
28021
28022
28023
28024
28025
28026
28027
28028
28029
28030
28031
28032
28033
28034
28035
28036
28037
28038
28039
28040
28041
28042
28043
28044
28045
28046
28047
st
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
The function computeDuration() calculates the duration of a call in seconds and
stores it using the method setDuration(). This errorReport deals with the second
part of the func --> Incoming Call-Logging Later when printing, we can only print
duration valu
Allocating a buffer for call logging data failed.
The ChargeSpecification instance in the DB for this Trunk/bundle doesn't exist or
can't be found. There is an inconsistence in the DB. Check if the CountrySetting
really exists which is defined for this trunk/bundle. This might be a
versiontransfer proble
process has a priority higher than exclusion prio
FreeSemaphore called without ReserverSem called before
devP == NULL !
devP == NULL !
routeP == NULL!
routeP == NULL!
uncompatible state
routeP == NULL !
routeP == NULL !
routeP == NULL !
routeP == NULL !
routeP == NULL
invalid proutId
invalid proutId
incompatible state
incompatible state
invalid proutId
incompatible state
invalid proutId
invalid proutId
sigP->dataP == NULL !
incompatilbe state
invalid proutId /
incompatible state
change mode not allowed for this type of device
devP==NULL !
incompatible state
devP==NULL!
incompatible state
devP==NULL
devP == NULL;
incompatible state
devP==NULL
incompatible state
device not found
incompatible state
device not found
device not found
incompatible state
device not found
incompatible state
device not found
incompatible state
device not found
devP==NULL
devP==NULL
devP==NULL
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28048
28049
28050
28051
28052
28053
28054
28055
28056
28057
28058
28059
28060
28061
28062
28063
28064
28065
28066
28067
28068
28069
28070
28071
28072
28073
28074
28075
28076
28077
28078
28079
28080
28081
28082
28083
28084
28085
28086
28087
28088
28089
28090
28091
28092
28093
28094
28095
28096
28097
28098
28099
28100
28101
28102
28103
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
devP==NULL
devP==NULL
devP==NULL
*dataPP==NULL
devP==NULL
device not found
device not found
*dataPP==NULL
device not found
device in transp state and no route found
invalid route Id
devId invalid
Send Allowed message contained incorrect socket id.
currentPrio <= exclusion prio
FreeSem called whithout presious Reserve
invalid socket id
socketIdP == NULL
sig pointer from PRT is NULL
invalid route id
incompatible route state
dlPrtSend: SendAllowed returns FALSE
sigP == NULL
sigP == NULL
route not found (invalid route Id)
sigP->dataP == NULL
unexpected major received
dlPchHandle: unexpected signal received
send procId == OseProcIdUndef
newState: routeP==NULL
dlPchCreateResp: sigP==NULL
dlPchReleaseReq: sigP==NULL
dlPchReleaseConf: sigP==NULL
dlPchSend: sigP==NULL
dlPchAck: sigP==NULL
dlPchCreateResp: routeP==NULL
dlPchReleaseReq: route not found
dlPchReleaseConf: route not found
dlPchSend: route not found
dlPchAck: route not found
dlPchRemoteCreateResp : route not found
dlPchRemoteRelReq: route not found
dlPchRemoteRelConf: route not found
dlPchRemoteData: route not found
dlPchRemoteAck: route not found
dlDevSendUsConnectReq: invalid devId
dlDevSendUsConnectConf: invalid devId
dlDevSendUsReleaseReq: invalid devId
dlDevSendUsReleaseConf: invalid devId y
dlDevUsXon: invalid devId
dlDevSendUsData: invalid devId
dlDevSendUsDataAck : invalid devId
dlSktRouteCreateResp: invalid routeId
dlSktRotueReleaseReq: invalid routeId
dlSktRouteData: invalid routeId
dlSktRouteDataAck: invalid routeId
dlSktGetSocketId: invalid routeId
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28104
28105
28106
28107
28108
28109
28110
28111
28112
28113
28114
28115
28116
28117
28118
28119
28120
28121
28122
28123
28124
28125
28126
28127
28128
28129
28130
28131
28132
28133
28134
28135
28136
28137
28138
28139
28140
28141
28142
28143
28144
28145
28146
28147
28148
28149
28150
28151
28152
28153
28154
28155
28156
28157
28158
28159
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dlPmxRteDsCreateResp: sigP==NULL
dlPmxRteDsReleaseReq: sigP==NULL
DsReleaseConf: sigP==NULL
RteDsData: sigP==NULL
RteDsDataAck: sigP==NULL
handlePrtData: invalid localEndpoint
handlePrtData: invalid remoteEndpoint
handlePrtCreateReq: invalid localEndpoint
handlePrtCreateReq: invalid remoteEndpoint
handlePrtCreateResp: invalid localEndpoint
handlePrtCreateResp: invalid remoteEndpoint
handlePrtDataAck: invalid localEndpoint
handlePrtDataAck: invalid remoteEndpoint
handlePrtReleaseReq: invalid localEndpoint
handlePrtReleaseReq: invalid remoteEndpoint
handlePrtReleaseConf: invalid localEndpoiin
handlePrtReleaseConf: invalid remoteEndpoint
dlPrtSend: invalid route Id
dlPrtSendAllowed: invalid routeId
dlPrtGetAddresses: invalid routeId
handleSktAccept: invalid socketId
handleSktData: invalid socket id
handleSktDataAck: invalid socketId
handleSktClose: invalid socketId
dlSktRouteData: invalid socketId
dlSktRouteDataAck: invalid sockId
dlSktSynchConnect: invalid socketId
dlSktAsyncConnect: invalid socket id
dlSktBind: invalid socketId
dlSktAsynchAccept: invalid socketId
dlSktSynchAccept: invalid socketId
dlSktSendTo: invalid socketId.
dlSktRecvFrom: invalid socketId
dlSktClose: invalid socketId.
dlSktGetAddresse: invalid socketId
dlSktRouteCreateResp: sigP==NULL
dlSktRouteReleaseReq: sigP==NULL
dlSktRouteData: sigP==NULL
dlSktRouteDataAck: sigP==NULL
handlePrtDataAck: incompatile state
dlSktSend: *dataPP pointer invalid
dlSktSendTo: invalid *dataPP pointer
dlSktSend: invalid socketId
dlPmxResetLocalMode: locDataP == NULL
DevRegister: device already registered
Invalid socket family
Socket protocol family not supported
NULL signal pointer received in dlPsmRouteCreateReq()
Invalid port route ID in dlPsmRouteCreateReq()
Unexpected message
dlPsmRouteData() NULL signal pointer
dlPsmRouteData() invalid port route ID
Invalid socket ID
Invalid socket ID
Invalid devId passed to findRouteOnDevice()
Invalid socket ID passed in connect message
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28160
28161
28162
28163
28164
28165
dl
dl
dl
dl
dl
dl
28166
28167
28168
28169
28170
28171
28172
28173
28174
28175
28176
28177
28178
28179
28180
28181
28182
28183
28184
28185
28186
28187
28188
28189
28190
28191
28192
28193
28194
28195
28196
28197
28198
28199
28200
28201
28202
28203
28204
28205
28206
28207
28208
28209
28210
28211
28212
28213
28214
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
Invalid socket ID passed in accept message
Invalid socket ID passed in data message
Invalid socket ID passed in DataAck message
findListener(): Unknown family
unrecognised protocol passed to PPP dsData()
/* Fail if no connection has been set up */
A Delivery Confirmed socket cannot use the synchronous send. Only the
Asynchronous send is possible in the case
Fusion TCP/IP stack to OSE interface
Invalid address family
Failed to create Fusion socket.
Unexpected minor message type in fusionProc()
Unexpected major message type in fusionProc()
Fusion send() failed.
select() failed
recv() failed
Unrecognised protocol family for Fusion socket.
No more PPP Devices.
os_critical() called while already in critical region.
os_normal() called while not in critical region.
Wrong level passed to os_normal().
Invalid major message type to dlFusEchoProc()
dlFusEchoProc() failed to bind.
Fusion ACCEPT_NOTIFY failed to create server socket.
Fusion bind failed
Socket Not Allocated
PPP throwing DS data away.
Failed to bind telnet listener
Failed to creat Fusion route with ll_config()
ppp_onechar_input() failed.
Failed to allocate buffer for Fusion DS sends.
Socket pool pointer is null
Fusion listen failed.
Datalinks is trying to have a sleep and we don't allow that do we?
Attempt to create a socket before datalinks has been initialised.
Unexpected Fusion minor message type.
Datalen is zero
Datalen is zero
Datalen is zero
currentPrio <= exclusion prio
FreeSem called whithout previous call to Reserve
Unexpected dlskt minor type
Unexpected message received
Failed to allocate an 'm' structure for a message from MIPR
Unrecognized 'Intern' port.
Invalid PPP dev ID.
The Fusion tick process received an unexpected message.
Freeing buffer which is already free.
freeEndpoint(): invalid routeId .
The received buffer from the application is too big, a memory leak will occur.
Error Mapping DlTbxMenuEnuC to MaTbxMenuEnuC - undefined value
the server socket has a problem
Freeing buffer with inconsistent parameters.
Try to store more characters than allowed.
unackSentCnt will go negative in dlSktRouteDataAck()!!
Failed to add ethernet interface route.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28215
28216
28217
28218
dl
dl
dl
dl
28219 dl
28220 dl
28221 dl
28222 dl
28223 dl
28224 dl
28225 dl
28226
28227
28228
28229
28230
28231
28232
28233
28234
28235
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
28236 dl
28237 dl
28238 dl
28239 dl
28240 dl
28241 dl
28242 dl
28248 dl
28249 dl
28250 dl
28251
28252
28253
28254
28255
28256
28257
dl
dl
dl
dl
dl
dl
dl
28258 dl
28259 dl
28260 dl
28261 dl
Unknown address type
dlSktAsynchSendTo NULL dataP
dlSktAsynchSendTo() dataLen == 0
Invalid socket ID in dlSktSendTo().
App trying to send data to a socket which is not connected. P1 is the socket ID.
Unexpected DsDataAck.
Fusion news arrived, but there is no Fusion socket process for this socket!! P1 is
the dlSockId, P2 is the news.
No process attached to a valid socket.
The XaInternPrinter has to be related to a device which is a V24 or a PA, this is
none of it.
Database problem: A unique instance is neither found nor created!
The file with the ethernet settings was found but there was a reading problem.
Ethernet IP settings are set to factory default.
Pointer to
PPP session not the same as pointer to ned tdevice which
points to a PPP session.
Urecognised absolute number.
the variable myOutString is full
dlDevSendDsData() called while blocked!
fusion socket failed in close. Param 1 is the fusion error id.
dlDestination tries to send data before establishing a connection
DlDevUsXon() received a NULL signal pointer.
DlSktAsynchSend() - Invalid socket ID
Fusion heap memory corrupted. We are going to crash soon
dlDevDsData() dataP == NULL
DLEthernet instance was not found in the database. Seems to be that the DB is
corrupt. The system should be reseted or crashed.
The address range configured for PPP server assigned addresses is not large
enough. p0=start address, p1=end address, p2=required size
fnP is NULL!! How can this be?
Attempt to delete a non PPP route from the routing table was blocked.
P0=devName, P1=ipAddress, P2=0
Failed to add gateway entry to routing table with ll_route() P0=err, P1=0, P2=0
test id
Call to select when the set is empty!
Stray dsPppConnSigP signal arrived? P1 = sockId, P2 = proutId, P3 = Sender
Proc ID
Unexpected releaseReq P1 = localEndpoint, P2 = remoteEndpoint, P3 = current
state
monitor() overflowed the buffer!!! P1 = buffer, P2 = length, P3 = MaxLength
Something went wrong with the dest object linked to the internal printer. P1:
(UInt32)printerId P2: (UInt32)dev.getPortId()
INET system call failed. P1: stackError
INET system call failed. P1: stackError
INET system call failed. P1: stackError
INET system call failed. P1: stackError
INET system call failed. ioctl() P1: stackError
INET system call failed. close() P1: stackError
We couldn't add a requested route for some reason. P1: source IP address P2:
remote IP address P3: INET response status
We have no valid procid so we can not respond to the request. An application
will hang forever!!!
The reinterpret_cast failed. P1: (UInt32)DlDevRegisterSignal
The reinterpret_cast failed. P1: (UInt32)DlDevDeregisterSignal
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28277 dl
The reinterpret_cast failed. P1: (UInt32)DlDevDsDataSignal
The reinterpret_cast failed. P1: (UInt32)DlDevAckDsDataSignal
The reinterpret_cast failed. P1: (UInt32)DlDevDsDataGramSignal
The reinterpret_cast failed. P1: (UInt32)DlDevUsDataSignal
The reinterpret_cast failed. P1: (UInt32)DlDevAckUsDataSignal
P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel)
The reinterpret_cast failed. P1: (UInt32)DlDevAckUsDataGramSignal
The reinterpret_cast failed. P1: (UInt32)DlDevCloseSignal
The reinterpret_cast failed. P1: (UInt32)DlDevStatusSignal
The reinterpret_cast failed. P1: (UInt32)DlDevReleaseResponseSignal
The reinterpret_cast failed. P1: (UInt32)DlDevOpenSignal
The reinterpret_cast failed. P1: (UInt32)DlDevDeviceMonitorLevelSignal
The reinterpret_cast failed. P1: (UInt32) DlDevChangeOwnershipSignal
The reinterpret_cast failed. P1: (UInt32) DlDevDeviceBusySignal
No valid signal handler has been found. P1: (UInt32)MinorOf(aSignalP->sig)
A driver tries to register a device which already exists! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel)
28278 dl
Someone tries to open a device which the flow control value is not balanced.
P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel)
28279 dl
Someone tries to open a device which the flow control value is not balanced.
P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel)
28262
28263
28264
28265
28266
28267
28268
28269
28270
28271
28272
28273
28274
28275
28276
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
28280 dl
28281
28282
28283
28284
28285
28286
28287
28288
28289
28290
28291
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
28292 dl
28293 dl
28294 dl
28295 dl
28296 dl
28297 dl
Someone tries to open a device which the flow control value is not balanced.
P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel)
A requested error signal handler is not defined. P1: minor signal typ
(0DlDevMinorEnum)
We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id
The data length is 0! P1: Driver Proc Id
We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id
We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id
We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id
We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id
We have a no valid DlDevDeviceC pointer. P1: Driver Proc Id
We have a no valid DlDevDeviceC pointer. P1: Driver Proc Id
We have a no valid DlDevDeviceC pointer. P1: Driver Proc Id
We have a no valid DlDevDeviceC pointer. P1: Driver Proc Id
The socket level sends us unexpected data. P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
The socket level sends us unexpected data. P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
The socket level sends us unexpected data. The data gets destroyed. P1:
device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3:
device state (DlDevState)
The socket level sends us an ack too much! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
We got an unexpected ack from the socket layer! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
We have a mix of stream and datagram acks! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28298 dl
28299 dl
28300 dl
28301 dl
28302
28303
28304
28305
28306
28307
28308
28309
dl
dl
dl
dl
dl
dl
dl
dl
28310 dl
28311 dl
28312 dl
28313
28314
28315
28316
28317
28318
28319
28320
28321
28322
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
28323
28324
28325
28326
28327
28328
28329
28330
28331
dl
dl
dl
dl
dl
dl
dl
dl
dl
28332
28333
28334
28335
28336
dl
dl
dl
dl
dl
There is a missing status handler. P1: device port ref (SmPortReferenceC) P2:
device channel (DlDevChannel) P3: device status (DlDevStatusEnum)
We got an unexpected release response! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
We can not change the ownership of a device because it is not allocated. P1:
device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3:
the given proc id
The reinterpret_cast failed. P1: device port ref (SmPortReferenceC) P2: device
channel (DlDevChannel) P3: Application Proc Id
The OSE gives us a null pointer! P1: device port ref (SmPortReferenceC) P2:
device channel (DlDevChannel) P3: Application Proc Id
no valid DlDevDeviceC pointer P1: Application Proc Id
The reinterpret_cast failed. P1: Application Proc Id
The socket layers passed us 0 data. P1: Application Proc Id
no valid DlDevDeviceC pointer P1: Application Proc Id
no valid DlDevDeviceC pointer P1: Application Proc Id
The receive failed. P1: Application Proc Id
no valid DlDevDeviceC pointer P1: Application Proc Id
The driver sends still data even though he got a stop. P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
We have no upstream socket interface where we can send the data to! P1:
device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3:
device state (DlDevState)
We can not send any data in this state. The driver must be broken! P1: device
port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device
state (DlDevState)
We got an ack from the socket too much! P1: device port ref
(SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state
(DlDevState)
The user has not opened a ds interface yet->coding error.
It is not allowed to call listen() after open()->coding error.
No downstream interface->maybe coding error.
No downstream interface (open failed).
Maybe a coding error (user has opened a downstream interface).
On this stage the downstream interface must exist.
INET system call failed. getsockname()
sigP->bsdSocketP != this
No such socket family.
Null pointer has been detected. P1: socketId P2: errorNo P3: datalinks error
INET sytem call failed. getsockname() P1: (UInt32)stackError
INET sytem call failed. accept() P1: stackError
Socket id is invalid.
Attempt to bind the socket failed. P1: inetSocketId P2: stackError
Attempt to listen() failed. P1: inetSocketId P2: stackError
INET system call failed. close() P1: stackError
The socket is not there, but it should be.
INET system call failed. select() P1: (UInt32)stackError
Only one instance of the same socket is allowed to store within the socket
container.
The desired socket instance has not been found within the socket container.
Invalid socket type.
INET system call failed. P1: stackError
INET system call failed. ioctl() P1: stackError
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28337
28338
28339
28340
28341
28342
28343
28344
28345
28346
28347
28348
28349
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
28350 dl
28351 dl
28352 dl
28353 dl
28354 dl
28355
28356
28357
28358
28359
28360
28361
dl
dl
dl
dl
dl
dl
dl
28362
28363
28364
28365
dl
dl
dl
dl
28366
28367
28368
28369
28370
28371
28372
28373
28374
28375
28376
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
dl
INET system call failed. setsockopt() P1: mySocketId P2: stackError
INET system call failed. setsockopt() P1: mySocketId P2: stackError
The connect() attempt failed. Tell it to the application. P1: stackError
INET system call failed. send() P1: stackError
INET system call failed. recv() P1: stackError
INET system call failed. close() P1: stackError
INET system call failed. accept() P1: stackError
INET system call failed. getsockname() P1: error
The error was not handled P1: (UInt32)error
Invalid parameter to add.
SockInfo not found.
Socket not known during connect()
Socket mis-match in handleWriteNotification().
Zero is not a valid error reported by INET (no error). But INET nevertheless
reports this error via INET_ERRNO event. This error is currently treated as "no
error".
The INET TCP/IP stack has reported an error which we do not know. This error
is treated as a Datalinks internal "DlTypErrUnknown" error.
The INET system call inet_recvfrom() failed. Check the global INET errno
variable to see the reason. The errno variable is passed as an argument of this
error report.
Since UDP is a connection less protocol, 'connectTo()' cannot be called.
For datagram sockets there is no error handler in the socket class library. Errors
are handled directly (passed as reference from the app down to the eventhandler
process), and the return values are set appropriate.
send() failed. // INET system call failed send(). if (stackError ==
EHOSTUNREACH) {
MaAllAsynchFacadeC::sendErrorReport(MaSysSevEnuC::Warning, 28355, 0,
(UInt32)ipstackSocketId, (UInt32)stackError, sockInfoP->getApplicationPort()); }
else {
ipstack socket id already in mapper!
BSD socket pointer already in mapper!
Sockinfo not found in connect()
Invalid argument to add to the socket mapper
The pendingSendfo.dataP is not NULL! Memory leak and software error!
We couldn't remove a route for some reason.
An application which has set his socket options to
'DlTypSocketProtocolDeliveryConfirmation' has sent an empty buffer. Such an
application may block because the delivery conf signal never arrives.
addSocket() failed.
invalid socket id
make() returned NULL.
This errorid replaces 28228 for the i6 project and upwards. Description: The
outgoing data queue is full. There is a problem in the derived class (monitor xy).
It sends too much data. Maybe the process priority of the monitor is too low or
the bandwith of
The wrong process has called stop()
select() told us we could send, but when we tried, 0 bytes were sent
We received a write notification for a socket that is not expecting one.
Opening an internet socket failed!
The listen command failed! A server is not listening again.
The requested socket family is unknown!
Unregognised address.
NULL pointer
connect() failed and the error was not EINPROGRESS
connect() succeeded and it should always fail with the error EINPROGRESS
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
28377 dl
28378
28379
28380
28381
28382
dl
dl
dl
dl
dl
28383 dl
28384 dl
28385
28386
28387
28388
dl
dl
dl
dl
28389
28390
28391
28392
28393
28394
28395
dl
dl
dl
dl
dl
dl
dl
28396
28397
28398
28399
28400
dl
dl
dl
dl
dl
Someone tried to send a NULL pointer
Found a NULL pointer on myOutDataQueue. There should not be any NULL
pointers on this queue.
Data buffer failed sanity checks.
Proxy timeout waiting for reply from event handler.
makeLocalConnection() timedout waiting for response.
Corrupt TPKT packet header
A server is being destroyed, but it still has an incomplete incoming packet that
has not been forwarded to the application. This packet will now be trashed.
Some blighter handed us a NULL pointer in an incoming data.
A contiuation of a TPKT packet arrived, but there was not enough room for it?
dynamic_cast failed!
find was going to return a dud pointer. It will now return NULL instead.
Unrecognised minor.
My out data queue is currupt and has been cleared. Memory has probably
leaked as a result, though it may not have as the corruption may have been
caused by the process dying, in which case the memory was all freed
automatically by OSE and the pointers wer
NULL instance pointer in signal.
Unexpected signal
Unexpected QoS tag type
QoS settings not found
DlTcpIpDestination object not found!
Unrecognised address family
There are a few reasons for this error: - The DNS server(s) have not been
configured (in case DHCP is disabled) - The host name is not known within the
DNS system - The DNS resolver has a problem - The DNS server has a
problem
Failed to get PPP login information.
DlDestination is neither an IP destination nor a Printer destination?
Unexpected DlDstProxy signal
devAddressP is NULL in sendDatagram().
28401 dl
We got no answer from the event handler process within the MaxResponseTime.
28402
28403
28404
28405
28406
28407
The call to setSocketOptions() is not supported by the current Socket family.
Duplicated instance in the container.
Requested instance not found.
Since UDP is a connection less protocol, 'listenOn()' cannot be called.
General error for all dlskclst... functionality.
It's a must to have a valid destination address for a UDP destination.
dl
dl
dl
dl
dl
dl
28408 dl
28409 dl
28410 dl
28411 dl
28412 dl
28413
28414
28415
28416
dl
dl
dl
dl
DNS lookup failed, check the DNS server configuration or use static addressing
Prevent a memory leak.
Proc ID not known to report release response.
The start up confirmation from the just created dynamic process has not arrived
within a reasonable time window. Parameter 1 Application Port as hex.
General dlskc framework problem. Timing issue....
Dynamic cast failed. Close connection after a time is only for TCP sockets
available.
Dynamic cast failed. Dev Address is not good.
Ip multicast is only for UDP available.
No Signaling Encryption License Available
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30001 dp
30002 dp
30003
30004
30005
30006
30007
30008
30009
dp
dp
dp
dp
dp
dp
dp
30010
30011
30012
30013
30014
30015
30016
30017
30018
30019
30020
30021
30022
30023
30024
30025
30026
30027
30028
30029
30030
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
30031 dp
30032 dp
30033
30034
30035
30036
30037
30039
30040
30041
dp
dp
dp
dp
dp
dp
dp
dp
30042 dp
30043 dp
30044 dp
30045 dp
30046 dp
30048 dp
trying to send signal to not existing l3dpsProc
ConnInd not handled by DLC in this state.
DLC has received a non-connection-handover ConnInd while in one of its release
pending states. This will cause a software reset for this handset.
Default Error Id for dps process
CC message discarded.
DLC message discarded
MM message discarded
Message received for unknown component.
SW Reset (for some reason)
Tried to create a new instance but failed as it already existed. Params: Id, Type,
State of existing instance.
invalid instance type
unexpected or unrecognised message
Unexpected DiscInd or DiscCfm from original link.
dps state information
DiscInd received in unknown DLC state
LCE received message from DLC in an invalid state
DiscInd received for non-existing DLC instance
FDX_DATA_SWITCH_IND received by DLC in a state other than OPEN
Problem with SBC mon
Problem with table ind in LCE.
Tried to access an unknown queue type.
tried to store a dps message which contains an invalid (>255) instance-id.
DLC received unexpected TgTi (Timer expiry) message
DLC received unexpected TgDe message
DLC received unknown DPS message
DLC received expiry of timer DL04 in an unexpected state.
DLC received ReleaseRes in unexpected state.
DLC received ReleaseReq in unexpected state.
DLC received release req from LCE with an unknown release type
error mappping DpTraceCompEnuC to MaTraceCompEnuC
Sending a signal to a DPS NWK instance without an entry in the LCE routing
table or nxisting NWK instance.
LCE link state is LINK_RELEASED, but lceTable is not cleared.
When nwk entity is created, the lcetable entry for the entity is not empty
(InActive).
mmp received a message with an invalid length
mmp process received a message it didn't recognise (invalid minor)
mmp process received a message it didn't recognise (invalid major)
mmp received an message with an invalid destination
Unexpected message in COMSP
ComspC initialised with Undef handsetId.
DTU error.
Only for test purposes to see wether the "dl04" problem as described in br12791
really appears by the customer.
Error reporting for dtp related errors, including the DLE. No errors are critical, but
they are important for debugging pr up purposes.
Link in RBC table is not in-use (maybe not allocated or maybe cleared already)
link has an invalid value
Message couldn't be sent.
unexpected or unrecognised message. Parameters: 1. Signal type
(Major/Minor) 2. signal prio NOTE: Before I6.6 (step 52), this error number
was used for a whole range of errors in the dplog component. You need to look
at the code to see this. The in
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30067 dp
The handler did not free or re-use the signal buffer. Parameters: 1. Signal type
(Major/Minor) NOTE: Before I6.6 (step 52), this error number was used for a
whole range of errors in the dplog component. You need to look at the code to
see this. The
exceeded max. no. of (air software donwload related) requests to hs
There is an error in the reply(to a request) from the handset.
Could not close the directory stream. This could end with a crash because of
missing detaches.
Special message (My Multiframe Info is) received from SB unexpectedly.
PortableId Check in dpIwuMmpMmLocateInd failed.
Location Registration failed: HS is
(!Registered)&&((!NotRegistered)||(!Subscribed))
Starting of a new FT procedure failed
Error occured in dpmon or extension monitors
Error in HME component
Error in handset/system base remote monitor
Download failed(Threshold2 reached)! SwUpdateBarred sent to handset
fdl_release_cfm_cnt is unexpectedly 0
The systemBase made a second MFIReq. This happen if we did not get the
myMFI message of the SB which started up as second.
Wrong authentication key received. It must be UAK or AC.
TPUI is not present in the DectMmLocateAcceptRes message.
Wrong PT reply to the FT initiated key allocation procedure.
Wrong PT-reply message to the TEMP_ID_ASSIGN (LocateAccept) message
from the FT.
30068 dp
30069 dp
Wrong PT reply message to the FT initiated terminate access rights procedure
NW_LC_ENCRYPT_CFM received in an unexpected LinkState
30070
30071
30072
30073
NW_LC_MM_RELEASE_CFM received in an unexpected state of the process
A signal has been received in an unexpected MM state.
Minor of a signal not recognised.
dpAllDbReadDck failed.
The handset.findUnique(handsetId) failed in checkSWVersionLocReq. If this
happens the HS gets 'Get a new Hs Sw' and is blocked.
There is no unique network with the expected ID
SB didn't answer DiscInd within dlrel time.
CC received a CC_MM_CIPHER_CFM_E with result 0 during a
FTNWCC_INCOMING_NORMAL_LINK or
FTNWCC_INCOMING_SERVICE_LINK.
CC received a CC_MM_CIPHER_CFM_E with result 0 during a
FTNWCC_OUTGOING_NORMAL_LINK or
FTNWCC_OUTGOING_SERVICE_LINK.
NULL != contextP[LocationContext][handsetId]
The maximum of system bases for this system is reached. No more system
bases will be created in dp.
All system base id's are used in this location area 0. No more DectSystemBase
object will be created in LA0.
ConnInd received with default pmId and no I-frame.
The type of I frame was not regonized in a ConnInd message
Unknown signal received by DpMonC
Undefined or incorrect identifier value returned from DB
Startup conditions for system base not fulfilled. There are system bases
available in other location areas than LA 0.
An error with signal/instance handling in SMS process
System base with inRpn does not exist.
30049 dp
30050 dp
30051 dp
30052 dp
30053 dp
30054 dp
30055
30056
30057
30058
30059
30060
30062
dp
dp
dp
dp
dp
dp
dp
30063
30064
30065
30066
dp
dp
dp
dp
dp
dp
dp
dp
30074 dp
30075 dp
30076 dp
30077 dp
30078 dp
30079 dp
30080 dp
30081
30082
30083
30084
30085
dp
dp
dp
dp
dp
30086 dp
30087 dp
30088 dp
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30089 dp
30090 dp
30091
30092
30093
30094
30096
30097
30098
30099
30100
dp
dp
dp
dp
dp
dp
dp
dp
dp
30101 dp
30102 dp
30103
30104
30105
30106
30107
30108
30109
30110
30111
30112
30113
30114
30115
30116
30117
30118
30119
30120
30121
30122
30123
30124
30125
30126
30127
30128
30129
30130
30131
30132
30133
30134
30135
30136
30137
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
DeviceId already exists in another system base object.
DeviceId not accepted for the SB object with this RPN.
RFPISentToDeviceId != devId1 or devId2 during start up of the secondary AD2Interface.
Error in SMS TPDU.
SMS TL protocol error.
getFreeTv has been called, but there is already a tv in the table!
SMS RL protocol error
Error in SMS RPDU
Error in conversion between SMPP-like PDUs and SMS-TP PDUs.
Unexpected subscription state during desubscription.
PBX received EraseInd from handset, which should not happen.
dpsSwResetNeeded because of a 'hanging' dps instance. For more information
have a look in the parameters.
DectSwResetReq received from CPE and still a CC entity active.
The RBC table hasn't been cleared properly. It needs to be cleaned up for this
HsId.
DsrInd received to not existing link.
Attempt to assign a B-Channel without existing link.
Unexpected or wrong IPUI type.
Unexpected or wrong portable id type.
Location registration to undef LA.
AuthKeyType not supported.
SystemBase with inDevId not found.
SystemBase with inBaseId not found.
D3Ad2Device with inDeviceId not found.
D3Ad2Device with inPortRef and chanId not found.
DpDectHandset or DpDectHandsetData object with HsId not found.
Location area with inLaId not found.
No default location area available.
Location area not found. (navigateUniqueR3FromDpDectSystemBase failed).
No DpDectNetwork available.
ARI check failed.
Location area not found (navigateUniqueR2FromDpDectHandset failed).
inPortRef == SmPortReferenceC::Undef
Device with inPortId/devChanId not found.
System Base with inRPN not found.
Problem with CC-IWU.
Hs performs a location registration, but its HsType is undef in the DB.
Delayed myMFI message received.
mfiGetIndex reached UInt8Max!
DpsDl04Expired.
incorrect signal
[3~
Firs
und handled signal in dprbcmux.
Default CISS constructor without HsId used.
Unknown Minor received by CISS.
Protocol profile in {FACILITY} failed.
No <<FACILITY>> IE in {FACILITY} message.
Misuse of Connectionless TI.
Wrong Ti for CLP (CLSS).
Unexpected message received in this state.
30138 dp
Unexpected SpecMsgReqMFI received by a PBX with the new MFC concept.
30139 dp
locate_accept_res_msg != NULL when entering in iwuMmLocateAcceptRes(..).
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30140 dp
30141 dp
30142
30143
30144
30145
30146
30147
30148
30149
30150
30151
30152
30153
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
30154 dp
30155 dp
30156 dp
MM received an DpsDectadReleaseReqE. This errorlog has been introduced to
check if this case ever happens (this code is in since 1996 and nobody knows
today what it is needed for. If this error never occurs, the code can be removed.
CC received an DpsDectadReleaseReqE. This errorlog has been introduced to
check if this case ever happens (this code is in since 1996 and nobody knows
today what it is needed for. If this error never occurs, the code can be removed.
Check also for erro
DLC received a dataInd when the "early send" flag was set. This means that
handset and PBX are in different states.
DpDectHandsetData object with HsId not found
Unexpected Dect signal minor received by CC-IWU.
TpTerminal with TerminalId not found.
Creation of handsetData object failed.
dpAllDbReadPortableId failed.
D3Device with devId not found.
Second port on a SB8 on different node than the fist port.
RBC - Incorrect "Ad2Received" message size received from the PRX
Creation of an already existing rbc portRef Map element.
Removing of an already removed rbc portRef Map element.
the system was unable to determine the system base type
The device id of a system base has become invalid although the system base is
still flagged as active
uPortRef of at least one link is undef. Info about the normal link.
uPortRef of at least one link is undef. Info about the handover link.
30162 dp
Unexpected signal received by one of the dplog objects. Parameters: 1. Signal
type (Major/Minor) 2. Object type (see enum DpLogObjEnu in dplog.hh) 3. state
- if the object has states. Obviously the value depends on the object.
Trying to set the state to an invalid value: Parameters: 1. Object type (see
enum DpLogObjEnu in dplog.hh) 2. existing state [set to 0xFF if we don't know
the old state] 3. new state (that can't be set)
Can't convert one of the parameters needed into a string. Parameters: 1. The
sort of "thing" that can't be converted. Tells the meaning of the next parameter.
(look in code to see what these numbers mean) 2. The value of the "thing" that
can't be conv
Can't find the required instance. Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) 2. the id of the instance that could not be found)
Action not allowed/expected in this state. Parameters: 1. object type (see
enum DpLogObjEnu in dplog.hh) 2. the current state of the object 3. a number
(unique within object) to identify what it was trying to do
Invalid port reference Parameters: 1. object type (see enum DpLogObjEnu in
dplog.hh) 2. port reference
30163 dp
Invalid / unknown / unexpected log type Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) 2. log type (see DpLogTypeEnu in dploglib.hh)
30164 dp
Couldn't create the object we wanted. Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) of the object trying to create. 2. myLogType (see
DpLogTypeEnu in dploglib.hh) of this controller. 3. instance id (if appropriate)
30165 dp
No log string. Parameters: 1. object type (see enum DpLogObjEnu in
dplog.hh). Will always be "Controller". 2. myLogType (see DpLogTypeEnu in
dploglib.hh) of this controller. 3. myBuilderP (just in case that's the problem)
30157 dp
30158 dp
30159 dp
30160 dp
30161 dp
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30166 dp
30167 dp
30168 dp
30169 dp
30170 dp
30171 dp
30172 dp
30173 dp
30174 dp
30175 dp
30176 dp
30177 dp
30178 dp
30179 dp
30180 dp
30181 dp
30182 dp
30183 dp
30184 dp
30185
30186
30187
30189
30190
30191
30192
30193
30194
30195
30196
30197
30198
30199
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
Major problem encountered in one of the logging objects. This error is reported
by the controller and the logging of this type is stopped. Parameters: 1. object
type (see enum DpLogObjEnu in dplog.hh) of the logging object that encountered
the problem.
Trying to delete a file that is in use. Parameters: 1. errno (return from file
system 2 & 3. first 8 characters of file name
Can't open file. Parameters: 1. 1 if trying to write; 2 if trying to read 2 & 3. First
8 characters of file name.
File only partly written. Parameters: 1. Number of bytes written 2. Total
number of bytes in file
String only partly copied into buffer Parameters: 1. Number of bytes written 2.
Total number of bytes in string
Can't allocate buffer - requested length is too great. Parameters: 1. requested
length 2. MaxBufSize
Can't read from tmp file Parameters: 1. return value from fsEfsFread
Can't write to output file Parameters: 1. return value from fsEfsFwrite
Wrong / invalid / unknown destination type in timeout signal. Parameters: 1.
object type (see enum DpLogObjEnu in dplog.hh) 2. destination type in timeout
signal
Wrong instance Parameters: 1. object type (see enum DpLogObjEnu in
dplog.hh) 2. id of this instance 3. instance id in received signal
Data collector object exists when it shouldn't. (Or to be more accurate, the
pointer is not NULL!) Parameters: 1. DpLogObjCollector 2. myLogType
The log data instance either does not exist or is not yet complete. Parameters:
1. DpLogObjCollector 2. myLogType 3. 1 if instance does not exist; 2 if not
complete
Pointer to DpLogCommC instance should be NULL and it isn't. Parameters: 1.
DpLogObjCollector 2. myLogType 3. instance Id
Problem with inserting an instance in my list/map Parameters: 1. object type
(see enum DpLogObjEnu in dplog.hh) 2. myLogType (only for dplogcollectc else 0) 3. instance id
Too many instances filled, Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) 2. number of instances filled
Instance is already in the map, when we're trying to add it. Parameters: 1.
object type (see enum DpLogObjEnu in dplog.hh) 2. instance id
Problem with removing an instance from map. Parameters: 1. object type (see
enum DpLogObjEnu in dplog.hh) 2. instance id
Invalid type. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh)
2. id (port ref) 3. type
One of the location areas is undef Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) 2. both location areas 3. state
Unexpected state of location area data. Parameters: 1. object type (see enum
DpLogObjEnu in dplog.hh) 2. both location areas 3. state
TermStartRes indicating false during location registration received.
Wrong data received from RM in SwitchDeassignCfm message
Data consistency check for SwitchDeassignCfm failed
Wrong data in case of CrBChanDeassToHandsetId
deAssignTimer could not be started
Invalid data in RbcStartDeAssignTimer signal
deAssignTimerExpired
SwitchResponse message missing from RM
Invalid chanId in function startDeAssignTimer(chanId)
Invalid chanId in function stopDeAssignTimer(chanId)
Invalid chanId in function isDeAssignTimerRunning(chanId)
Invalid chanId in function initDeAssignTimer(chanId)
Attempt to start DeAssignTimer which is already running
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30200
30201
30202
30203
30204
30205
30206
30207
30208
30209
30210
30211
30212
30213
30214
30215
30216
30217
30218
30219
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dpNwkMmLibKillProcess called
TPDU data size too big
SendCipherReq failed due to wrong component
Send AbortCipheringReq failed due to wrong component
Invalid minor received in ccMmCipherReq(..)
Invalid minor received in ccMmAbortCipheringReq(..)
SMS: RP-ERROR
DpSmsTpFcsError
No Handset associated to this subscriber
No subscriber associated to this handset
Unknown (new) IE
Optional IE content error
Mandatory IE missing
Irrecoverable Message Error
Mandatory IE Content Error
Optional IE Content Error
Invalid protocol discriminator
Unknown (new) message type
DpDectHandset with termId not found
No DpDectHandsetTypeC match with TpTermTypeC TpTermVersionC
30222 dp
A message containing more than 2 segments has been received. (Currently can't
be handled in Tp, so rejected here at DLC level). Parameters: handset-id
Incoming message discarded by DLC - because something went wrong with the
segmentation. Parameters: handset-id, length of discarded messge, first 4
bytes of discarded message.
DLC received wrong segment type. (Should not be possible - sw bug?)
Parameters: handset id, frame type
30223
30224
30225
30226
30227
30228
30229
30230
30231
30232
30233
30234
30235
30236
30237
30238
30239
30240
30241
30242
30243
30244
30245
30246
30247
Unexpected registration state during location registration Parameter1:
HandsetId (HEX) Parameter2: State: enum
Undef,
Detached,
Attaching,
Attached,
Un
Missing <<IWU-TO-IWU>> info within the location context
Missing location context information
Unexpected MajorDect signal received
Unexpected MajorTgDt signal received
Unknown DOA return value received
DOA return value received for a hsId which is not in the list
Unexpected MajorDect signal received
Unknown L3DeEtpDoa msgType received
handsetData object not found
Hdf file could not be opened
Invalid barred type received
Invalid error type received
Hdf version missing
getFile failed
Invalid barred type received during location registration
Incomplete or wrong HsSwDl files
No PortableId in first IFrame in the ConnInd Msg
Invalid PortableId
rbcGetHandsetIdFromL3Msg(..): Invalid L3Msg parameters
Unknown TgDs signal received by DOA
Wrong EMC in L3DeVlIeCodeEscToProprietary IE
Invalid HsId from L3DePutIPUITypeO
Invalid HsId from L3DePutIPUITypeN
Invalid HsId from L3DePitIPEI
30220 dp
30221 dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30248 dp
30249 dp
30250
30251
30252
30253
30254
30255
30256
30257
30258
30259
30260
30261
30262
30263
30264
30265
30266
30267
30268
30269
30270
30271
30272
30273
30274
30275
30276
30277
30278
30279
30280
30281
30282
30283
30284
30285
30286
30287
30288
30289
30290
30291
30292
30293
30294
30295
30296
30297
30298
30299
30300
30301
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
ccMmCipherReq called in invalid MM state
MM received a RelInd in invalid state
At the end of handover, the EARLY_SEND flag is set but the transmit queue is
empty. This should be impossible! Parameters: 1 handsetId 2 DLC state 3
DLC flags
Connection Handover with link type != FDL_CHO_REQ
CcMoMt received InvalidPtp message
CcMoMt reveived connect message in wrong state
CcMoMt receives info message in wrong state
CcMoMt receives IwuInfo in wrong state
CcMoMt receives release message in wrong state
CcMoMt received release complete message in wrong state
CcMo: No basic service IE in the setup message
CcMo: Setup in wrong state received
CcMoMt: Unexpected PTP message received
ccMoMt: CipherCfm with positive result received in wrong link type
ccMoMt: CipherCfm with negative result received in wrong link type
Missing basic service IE in MmsSetup message
MoMt: Cc02 expired and cc previously initiated the release
Mms: Release response ignored
Mms: ReleaseRes received but wrong info in ftnwcc_release_lower_layers
CcMoMt: RelCfm received in wrong state
Cc: Invalid PTP message ignored
Cc: Unrecognised progress_ind data
Cc: Alerting received in unexpected state
Cc: Connect received in unexpected state
Cc: Info received in unexpected state
Cc: Release received in unexpected state
RelCom received in unexpected state
Cc: Missing basic service IE in setup message
Cc: Missing basic service IE in setup message
Cc: Missing basic service IE in setup message
Cc: Setup received in unexpected state
Cc: Unexpected message type
Cc: CipherCfm (positive result) received but unexpected link type
Cc: CipherCfm (negative result) received but unexpected link type
Cc: Missing basic service IE in DectSetupReq message
Cc: CC02 expired, unexpectd release reason
Cc: RelRes received without previous rel indication to the IWU
Cc: RelRes received with unexpected ftnwcc_release_lower_layers
Cc: RelCfm received in unexpected state
CcMoMt: Connect received in unexpected state
CcMoMt: Info received in unexpected state
CcMoMt: IwuInfo received in unexpected state
Cc: Alerting received in unexpected state
Cc: Connect received in unexpected state
Cc: Info received in unexpected state
Optional IE missing
Mandatory IE content error
Mandatory IE missing
Irrecoverable message error
Invalid message length
MMsIwuInfoReq received in unexpected state
CMmsConnectReq received in unexpected state
DectCMmsConnectRes received in unexpected state
CcMoMt: Unexpected message received
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
30302
30303
30304
30305
30306
30307
30308
30309
30310
30311
30312
30313
30314
30315
34001
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
dp
lr
34002 lr
34003 lr
34004 lr
34005 lr
34006 lr
34007 lr
34008 lr
34009 lr
34010
36001
36002
36003
lr
ma
ma
ma
36004 ma
36005 ma
36006
36007
36008
36009
ma
ma
ma
ma
36010 ma
36011 ma
CcMoMt: Unexpected message received
CcMoMt: Unexpected message received
DectInfoReq received in unexpected state
DectIwuInfoReq received in unexpected state
DectConnectReq received in unexpected state
DectConnectRes received in unexpected state
Unexpected Dect message
Unexpected Dps message
Unexpected TgTi message
Unexpected dect message received
Unexpected TgTi message received
Unexpected Dps message received
Unexpected DpMon message received
DL04 expired but nothing to retransmit as tx_q is null
error mapping lrNumAnalEnuC to XaNumAnalEnuC
This error is associated with trying to use a ifpointer that doesn't exist in a user
record. This is linked with bug 12935 but is generally useful. Will occur ifa a call
to nc_if_pointer fails to get a valid ifselection. This error is implemented first in
Indicates that the dialled digit length is less than the exchange access code.
Indicates that the dialled digit length is less than the exchange access code, but
this is in getSecondaryRoute()
When a primary provider fails and the secondary provider is invoked this warning
is sent to system admin to warn that the call is more expensive. similar to old
warning in xa domain. 1. Parameter: PrimaryProvider ID 2. Parameter: Used
Route of the prima
Null pointer found connecting sub asfter dtmf dialling. Check the bcsref
parameter passed to the fucntion to be sure that it was valid.
The LcrInterDigitTimer expired but the corresponding node doesn't exist any
more. Param 1: is the bcsref.
Unexpected tepId type in check if LCR enabled. Param1: tepId value Param2:
tepId type
LCR routing for tep other than subscriber or door! Param1: tep value Param2:
tep type
Functionpointer outString is not defined.
error mapping of mamontestflagenu to xamontestflagenu in xa domain.
Error id for enum mapping of xanumanalenu type.
Mapping MaSktProtFamEnumC to DlSktProtFamEnumC has resulted in
unknown instance of enum. Probably the Ma enum has been extended but the
mapping function has not.
MApping MaSktTypeEnumC to DlktTypeEnumC has resulted in unknown
instance of enum. Probably the Ma enum has been extended but the mapping
function has not.
MApping MaSktTypeEnumC to DlktProtEnumC has resulted in unknown
instance of enum. Probably the Ma enum has been extended but the mapping
function has not.
No more flash available
Cannot find MaDestinationIdC::InternPrinter
remote alarm raised after a system crash
Could not close the directory stream. This could end with a crash because of
missing detaches.
The ring buffer has rubbish in it, discarding it!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
36012 ma
36013 ma
36014 ma
36015
36016
36017
36018
36019
ma
ma
ma
ma
ma
36020
36021
36022
36023
36024
36025
36026
36027
36028
ma
ma
ma
ma
ma
ma
ma
ma
ma
36029 ma
36030 ma
36031 ma
36032 ma
36033
36034
36035
36036
36037
ma
ma
ma
ma
ma
36038
36039
36040
36041
36042
36043
36044
36045
36046
36047
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
36048 ma
36049
36050
36051
36052
36053
ma
ma
ma
ma
ma
MaSigTrcMonitorC::handleSig() has a signal it can't use and can't pass on to the
socket. If first parameter = 1 minor is unknown, if 2 command is unknown.
Used variously in file (mostly buffer overrun etc)look fter.
Unknown Major Signal cannot be handled by the signal handler.
Unknown command from user interface (signal tracer monitor) cannot be
handled.
Unknown self command cannot be handled by the handler.
No output path has been defined to put the data.
An alarm type was not treaded.
vsprintf() wrote off the end off the buffer.
There is a problem with the number of major signals the user has entered into
this selection map. Either he forgot to enter the new signal here as well, or he
didn't removed it after he has removed it from the 'MajorEnu' enum. Param1: 0
Param2: The number
Telnet parser missing!
An alarm type is missing for some reason.
An alarm destination is missing for some reason!
We could not create a required object!
We could not create a required alarm table!
// The requested alarm table is missing!
We could not create an alarm condition object.
We could not create the alarm spec object!
A recursive crash has occured while trying to write the crashlog to the filesystem.
Parameter 1 contains the crashlocation of the recursive crash Parameter 1 and 3
contain the first to entries of the call chain
Unexpected signal received.
Creating a socket failed for some reason.
There is already a running timer. If another timer is started before the first one
has expired, something went wrong.
Unexpected signal with major MajorTgEr received. Params: 1: Major, 2: Minor,
3: 0.
Unexpected signal received.
The alarm message is too long!
Timeout waiting for a reply from maSynProc.
The time synchronisation (offset calculating) failed.
An alarm stream destination can not handle multiple connections at the same
time.
Unexpected destination type.
An old hanging data buffer gets deleted.
The allocated buffer is too short!
Illegal alarm spooler state.
Illegal alarm spooler event.
Unexpected signal received.
Unexpected alarm spooler event
Illegal alarm spooler destination.
Incorrect password type
Alarm that the IBus-Tier has been stopped because a certain ErrorId turned up.
The SNMP Trap was not built and we received a NULL pointer instead. The
alarm is not sent to the SNMP destination. The spooler will try to re-send the
TRAP later.
The account's profile does not exist or is invalid
Max. number of subscriber accounts exceeded
Log not found in "UpdateLog" method
ACM expected signal not received before timeout
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
36071 ma
DAtabase layer error in 'init' transaction
SlotId hasn't match an instance in our aipModule map.
Database error in transaction 'login'
Database error in transaction 'logout'
Database error in transaction 'logoutAims'
Database error in transaction 'getAccountIdFromName'
Database error in transaction 'MaAcmSubscriberAccount::create'
We received a slotId which has not relation to one of our virtual AIP instances.
Therefore we have create a new instance with the received slotId.
Could not interpret signal in MaSumUpgradeProc!!
Database error in transaction 'writeLog'
Database error in transaction 'updateLog'
During the retrieval of the database an AIP with an unknown software generation
was detected. (Param1 = slotId, Param2 = nodeId)
The transfer from an AIP 6350 to an AIP 6500 failed.
The AIP hasn't restarted at all!! Or the "in service" signal which is sent from the
AIP hasn't been received by the L2 socket on the PBX!!!
The Sw upload of the AIP received a timeout!! (SlotId and NodeId -> param1 +
param2)
AIP says that it is in service but we have detected an error during the upload of
the software!!
Database error in transaction 'saveRowData'
Received a NULL pointer from the IP-Phone queue. This should not happen!!!
Param 1 shows the current size of the queue.
36072
36073
36074
36075
Subscriber account creation failed. Params: accountId, subsId, trn->willCommit
Database error in update of 'LastTimeProgrammed' attribute of MDT153
problem in date_time format detection
String is too long. It has been cut at max length.
36054
36055
36056
36057
36058
36059
36060
ma
ma
ma
ma
ma
ma
ma
36061
36062
36063
36064
ma
ma
ma
ma
36065 ma
36066 ma
36067 ma
36068 ma
36069 ma
36070 ma
ma
ma
ma
ma
36076 ma
36077 ma
36078 ma
36079 ma
36080 ma
36081 ma
36082 ma
36083 ma
36084 ma
36085 ma
36086
36087
36088
36089
36090
36091
36092
ma
ma
ma
ma
ma
ma
ma
The number of the satellites which are allowed to crash before a rollback is
executed, is set to Undef - this is wrong. Check in the UploadManager in AIMS...
The removal of the file (PBX appl., AIP appl. or IP_Phone appl.) failed. Either the
file does not exist or the file handle is still in use!
Open temporary ibus file for writing failed.
The software upgrade of the IP terminal was not successful. Param1 is the
subscriber number, param2 is the cause why the upload has failed.
The software upgrade of the IP terminal which previously failed, has been
successful now. Param1 is the subscriber number which indicates the IP
terminal
Looking for the IP-Phone file which is necessary for the upgrade of the phone,
but the file is not in the FileSystem!!!
ACM access without valid Datalinks source address
Portreference undefined for ACM access
An alarm type is not associated with the corresponding alarm condition! This
should never happen and must be investigated when it occurs.
A restart of the system is required. The basic initialisation of the system alarm is
damaged! The PBX used to crash at this place.
Data store transaction failed. The first/warm start of the Ma system alarm is
incomplete!
Data store transaction failed.
MaAlarmSpec object is missing!
MaAlarmDestination object is missing!
Data store transaction failed.
No valid alarm object id available.
The requested alarm table is not available anymore!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
36128 ma
A critical system alarm object is missing.
MaAcmAuthInfoStrC::make() does not know the specified service. Returning a
NULL pointer.
Unexpected signal with major MajorTbx received. Params: 1: Major, 2: Minor, 3:
0.
FileManagerEvent received: Param3 = "1" -> DirSizeLimitReached Param3 =
"2" -> DirSizeLimitUncritical Param3 = "3" -> not handled
Insertion in mySwDlMap was fine, but the object has not been found
Insertion in mySwDlMap failed as element already exists
Wrong msgLen in DppSigTStatusResp
No entry in mySwDlMap for received SwDlCfm msg
SwChaeck failed (myRespFailCtr > MaxDlRespNotOk)
Erase failed (myEraseFailCtr > MaxDlErFail)
Write failed (myWriteFailCtr > MaxDlWrFail)
SwDlCfmMsg received in wrong state
Status timer expired
No GetSwVersCmd for requested SwType
No GetSwVersCmd for next SwType
Unknown Stimuli content received during version check
Unknown Stimuli received during version check
Wrong content in DppSigTStatusChange msg
Unexpected stimuli
Wrong stimuli content
Unexpected stimuli
CheckSwDlCode failed: Invalid myCodeP
CheckSwDlCode failed: Invalid checkSum
CheckSwDlCode failed: Invalid address
Invalid swType
Invalid myCodeP
Unknown TmType
decodeVPNsf() wrote off the end of its buffer.
Tried to rename a file in the FS but this failed. The files to rename are for
instance the IP terminal SW, the AIP SW etc.
File copy has found a problem. The read bytes from the source file differ from the
bytes written to the destination file.
The rename of a file in the root directory has encountered a problem. The
rename did not take place!
copyfile of firmware package uploaded by webconfig failed
open file for writing "/logs/ibus/ibtStartUp.txt" failed param 1: errno
could not create directory to store crashlog files p1: errno p2: /home/crash
could not be created p3: 0
could not create directory to store errorlog files p1: errno p2: 1:/home/logs
could not be created
2:/home/logs/error could not be created p3: 0
could not create directory to store ibus files p1: errno p2: 1:/home/logs
could not be created
2:/home/logs/ibus could not be created p3: 0
36129 ma
could not create directory to store the ma sig files p1: errno p2: 1:/home/logs
could not be created
2:/home/logs/ma could not be created p3: 0
36130 ma
36131 ma
36132 ma
could not create directory to store the masum files p1: errno p2: 1:/home/logs
could not be created
2:/home/logs/ma could not be created p3: 0
The alarm spooler has not handled the event due to unknown destination.
Unknown event.
36093 ma
36094 ma
36095 ma
36096
36097
36098
36099
36100
36101
36102
36103
36104
36105
36106
36107
36108
36109
36110
36111
36112
36113
36114
36115
36116
36117
36118
36119
36120
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
ma
36121 ma
36122 ma
36123 ma
36124 ma
36125 ma
36126 ma
36127 ma
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
36133 ma
36134
36135
38001
38002
38003
38004
38005
38006
ma
ma
ia
ia
ia
ia
ia
ia
38007 ia
38008 ia
38009 ia
38010 ia
38011 ia
38012 ia
38013 ia
38014 ia
38015 ia
38016
38017
38018
38019
38020
38021
38022
38023
ia
ia
ia
ia
ia
ia
ia
ia
38024 ia
The new attributes 'DoADescription' or 'A600dHSDescription' or
'A600dHSFirmwareContainer' from the terminal software manager are not empty
when the directory 'home/sw/handset' is empty or does not exist! This case
should not happend.
No response to remote client active alarm request. Param1: nodeId of node
which did not respond
Failed to initialize, remove CPU2 related Account, Profile
Failed to bind VoiceMail Pipe Server
The VM Pipe Server received a "Send Allowed" message when it had nothing to
send.
Voice Mail pipe server received an unexpected message
Recieved a "Send Allowed" message for an unknown socket
Recieved a "Data Present" message for an unknown socket.
The remote IP address has an invalid value. 1st param - ip addr, 2nd param application port
A data connection has been already established or we are in passive mode with
this FTP session.
The establishment of a FTP data connection was not successful due to an
existing data connect timer was found.
FTP tried to open a data connection which is already in use. Note that the FTP
mode was set to passive.
A data connect timer was not canceled correctly. FTP mode was set to passive.
The establishment of a FTP Data connection failed due to a bind error.
During an establishment of a fTP data connection, DL sent us an invalid socket
Id.
While closing a data connection (FTP) an uncancelled data connect timer was
detected.
While closing a data connection (FTP) we tried to close a data socket that did not
exist.
The shutdown of a FTP Ctrl connection is not possible due to an invalid socket
Id.
Somebody tried to open a second FTP data connection, this is not possible.
handleSktNewSocket failed completely!
Data arrived on an unconnected FTP data socket.
During a FTP connection, data arrived on an unrecognised socket id.
The FTP Ctrl connection seems to be not connected.
The FTP data connection seems to be not connected.
The FTP connection seems to be invalid, we cannot send data on it.
in handleSktDisconnected(), the socket id was neither for the Data NOR for the
Ctrl connection of the FTP session.
38029 ia
The previous data connection (FTP) did not close correctly. Maybe a DL prob.
Data has been left over in the outgoing buffer. Seems to be a problem with the
sock.
Problem with allocating memory for the transmit buffer. (FTP)
The email service (ems) was not successfull. That means for example that an
email couldn't be sent via SMTP, or the max number of dynamic created was
reached. Note, only the automatic (PBX) sent mails lead to such warnings. If a
user is involved (terminal)
open / listen on the DL asyncServerSocket failed during the startup of the ftp
process. P1 is the error which was sent from DL.
38030 ia
open() on a DL socket reported an error. P1 is the error indication sent from DL.
38025 ia
38026 ia
38027 ia
38028 ia
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38031 ia
38032 ia
38033 ia
38034 ia
38035 ia
38036 ia
38037 ia
38038 ia
38039 ia
38040 ia
38041 ia
38042 ia
38043
38044
38045
38046
38047
38048
38049
ia
ia
ia
ia
ia
ia
ia
38050
38051
38052
38053
38054
ia
ia
ia
ia
ia
38055 ia
38056 ia
38057 ia
38058 ia
38059 ia
38060 ia
38061
38062
38063
38064
ia
ia
ia
ia
The send() method (DL) reported an error while sending the FTP reply to the
client. P1 is the DL error.
In sendBuffer() an error was reported. The send of the buffer to the FTP client
was not possible or went wrong!
Closing the data socket of the FTP session went wrong. P1 is the error which
was reported by DL.
Something went wrong with fseek(), either the filePointer or the filePosition is
grap..So we close the data session and delete the file from the FS
Data connection of the FTP was not active (neither a receive nor a transmit),
something went totally wrong.
while sending data to the client (RETR) an error occured in the send routine. P1
is the error received from DL.
The connect() in the sendBuffer method replied with a DL error. P1 is the DL
error.
The value of the class variable myType in the DTP is corrupt. This should be
either set to ASCII or IMAGE. P1 contains the value which was set in the var.
setState() went wrong. That should not happen. Something is corrupt.
The object FtpAccessLevel is not in the database. DS maybe corrupt!!
The DTP still exists, which means we have a data connection to one of the
clients. Somebody forgot to kill this DTP session. P1 is the IP address, P2 the
port to the connected client.
The socket family is not an internet one. Strange, we asked for one!!!! Datalinks
error.
It is allowed to send files or buffers to the client, nothing else!! In this case, the
medium was corrupt!!!
The direction var in the PI is corrupt.
The DTP has been already terminated!! This was not expected here!
The PI already exists!
The PI died while we were in a FTP session.
The listen of a DL AsyncServerSock failed. P1 is the error received from DL.
The open() on a DL AsyncServerSock failed. P1 is the error reported by DL.
The PI socket hasn't closed correctly. Seems to be a problem in DataLinks.
Maybe it's reboot time!!!!!
Failed to create unique key from address.
fsEfsSprintf() wrote past the end of the buffer.
The webserver hasn't started correctly.
In setSysMgntRelatedStatusInMib() parameter1 was neither "0" nor "1".
The parameter1 of the method setExternalApplRelatedStatusInMib() contained
an unexpected value. (errLog: Param1 is the value)
The the value of the parameter alarmType in
setExternalApplRelatedStatusInMib() was not expected. (Param1 in the Errorlog
contains the unexpected value)
The Param1 in setSubscriberRelatedStatusInMib() contained an unexpected
value. (The value is shown in the errLog - first parameter)
The parameter "alarmType" in setSubscriberRelatedStatusInMib() contained an
unexpected value. (see errLog - param1)
The parameter "alarmType" in the method setRouteRelatedStatusInMib()
contained an unexpected value. (see errLog - param1)
The parameter "alarmType" in the method setTrunkRelatedStatusInMib()
contained an unexpected value. (see errLog - param1)
The parameter "alarmType" in method setHardwareComponentStatusInMib()
contained an unexpected value. (see errLog - param1)
In method updateDataDeviceV24MibObjects(), V.24 object was not found.
In method updateEAMailServerMibObjects(), voiceMail object was not found.
In method updateEAAcdMibObjects(), acdServer object was not found.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38065 ia
38066 ia
38067 ia
38068 ia
38069 ia
38070 ia
38071 ia
38072 ia
38073 ia
38074 ia
38075 ia
38076 ia
38077 ia
38078 ia
38079 ia
38080 ia
38081 ia
38082 ia
38083 ia
38084 ia
38085 ia
38086 ia
38087 ia
38088
38089
38090
38091
38092
38093
38094
38095
ia
ia
ia
ia
ia
ia
ia
ia
38096 ia
38097 ia
In method updateEAPrinterMibObjects(): The printerId has not matched an
existing one.
In method updateSubscriberMibObjects: The subscriber object has no relation to
an directory entry. (see errLog - param1 = subsId)
In method updateRouteMibObjects(): The route object has no relation to an
directory entry. (errLog - param1 = routeId)
In method updateLcrMibObjects(): The leastCostRouting object was not found.
In method findV24WhichBelongsToVoiceMail(): The device which is connected
to the voiceMail is not an expected V.24.
The pointer of the response message which was returned from the protocol
handler is NULL.
The received ASN.1 PDU didn't contain an SEQ Tag or it was not a SNMP_V1
PDU.
In handleData(): Either the data pointer was NULL or the length of the data of the
received SNMP request was zero.
The send method in Dl was not succesful.
The MIB handler was not able to convert/update the received alarm into an appr.
MIB object.
The dateTime class returned an error while compiling the time in milliSeconds.....
The agent received a handleIncomingConnection on an UDP port. This is an
error.
The SNMP_V1 protocol handler received an SNMP message which cannot be
handled by an SNMP agent (trap/getResponse).
The handleGet() method of the SNMP_V1 protocol handler received a pointer to
a GET_PDU which was NULL.
In decode() an SNMP PDU was received which contained a varBindElement with
an objectSyntax which is not supported.
In IaSmpVarBindInt/StrC::encode(): The varBindElement to encode contains an
object type which is not supported.
During encoding of a varbindElement it was detected that the objectSyntax is
neither of type simple nor application.
In the constructor of an SNMP Response PDU the varbindElement couldn't be
encoded.
The UDP socket in the SNMP agent has a problem to start at all!!!
The SNMP agent pointer was NULL. This should not happen!
The transaction for setting the attributes of the network mgnt agent failed. This
should not happen. Looks like the data storage has a problem.
The SNMP request PDU contains a varbind list which has more than one entry.
The length of the number (subscriber/route etc.) is ZERO. This is not good.
Looks like the object, e.g. subscriber was not initialised correctly.
The fwrite() function of the filesystem has reported an error. Maybe there is no
memory left over in the FS. The data connection is closed.
There is still a telnet parser hanging around from a previous connection.
Unexpected SIP message.
Cannot send BYE message because we did not receive the ACK yet!!
Cannot send a BYE because we have not received the OK yet!!
We seem to not be either the UAC or the UAS of the initial invite?
SIP to SIP address mixup.
We have a duplicated hostname!
The identification between the DNS query and the DNS answer failed. The
answer from the DNS server was not expected.
Sip Registrar received a non register message
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38098
38099
38100
38101
38102
38103
ia
ia
ia
ia
ia
ia
38104 ia
38105
38106
38107
38108
38109
38110
38111
38112
38113
38114
38115
38116
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
38117
38118
38119
38120
38121
38122
38123
38124
38125
38126
38127
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
38128
38129
38130
38131
38132
38133
38134
38135
38136
38137
38138
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
38139
38140
38141
38142
38143
38144
ia
ia
ia
ia
ia
ia
38145 ia
Invalid Url received in 'From' tag. This is probably a dns name (not supported)
User not found in vector cache. (Param1: subsNum, Param2: userId)
Remote proxy call timed out
The DS transaction failed. Non of the values are stored in the database.
User has sent an invite from a different location (possible session stealing)
Notification of SIP user creation with empty subscriber number
A session has locked up and will now be removed forcefully in order to recover
the memory
The SIP User ID is not configured for the external registrar. We cannot register.
No such call?
Unexpected "200 OK" response
Call already exists
The URL in the 'To:' or 'From:' field was not a SIP one!
sendSipMessage() called with remote address 0.0.0.0 ?
NULL pointer passed to sendSipMessage()
We have no codec list.
Received an error in the IDLE state?
Received "200 OK" in unexpected state
Session not found
Remove of the branches in the MIB tree failed.
The MIB tree was not deleted before recreation of the one. This is only possible if
we receive an indication from SM!
MIB was rebuild due to an update of the UDP port of the SNMP agent.
Destination address invalid.
Internal server error
We received a 407 challenge but have not sent a request?
registrar/proxy info missing
External account not found.
Inserted external account over the top of an exisiting one
Tried to add a NULL pointer to the external account map?
Incoming response did not match a current transaction!
ALG: SIP entity not found!
We are trying to construct a NOTIFY but have not sent or received an INVITE
yet, so it is not possible to compute the call leg.
The transaction is neither a client nor a server?
handleCreateExtAccount() called on an account that already exists!
NULL pointer
Wrote and external account over an existing one.
Trying to add a NULL pointer to the SIP provider map!
createSipProvider, provider already exists!
Provider instance not found!
NOT Sending REGISTER to because the address is invalid
NOT Sending REGISTER because the registrar has not been configured
NOT Sending REGISTER because the credentials are not complete
Received a response to a REGISTER from us, but failed to find the account for
that!
Failed to find matching server transaction for incoming request!
Invalid attempt to send an OPTIONS message
A SIP transaction failed
Codec framelength not supported.
Found and corrected a corrupt Vocal::Data pointer.
Failed to find an account to make an outgoing external SIP call. It is likely that
SIP is not configured correctly if it failed here. Check that there is either a SIP
account for this subscriber, or a default for this provider.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38146 ia
38147 ia
38148
38149
38150
38151
38152
38153
38154
38155
ia
ia
ia
ia
ia
ia
ia
ia
Unknown SIP from field type.
No session found for incoming SIP message The UserAgent received a call
related SIP message for which it could not find the call. SIP calls are matched
using the DialogId which is made up from the "From Tag", the "To Tag" and the
"Call-Id" as specif
SIP request failed becase either the user credentials are wrong or payment is
required. Either way the provider blocked the call because the user does not
currently have access.
Provider pointer is NULL
Unhandled status code in handleSipStatus()
Recieved challenge, but we have not sent a REGISTER?
Primary address not known for provider
No account details for provider
Unknown TELNET command received
Stuck session timer fired in a non-transient state
38156 ia
38157 ia
38158 ia
It's time to retransmit a message, but the message seems to have disapeared.
myOutgoingInvite is not set
Failed to send ACK because status message is missing
38159
38160
38161
38162
38163
38164
38165
38166
38167
38168
38169
Received a challenge to our REGISTER, but the credentials are not configured
The transaction got stuck and the protection timer fired.
The performed DNS query failed for some reason.
hostname too long
parseRecordData() failed
sendSipStatus() with NULL command pointer.
Request timed out
NULL request pointer.
Overwriting an existing request
NULL signal pointer
Unrecognised minor type
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
38170 ia
38171 ia
38172 ia
38173
38174
38175
38176
ia
ia
ia
ia
38177
38178
38179
38180
38181
38182
38183
38184
38185
38186
38187
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
The DNS query failed because neither the primary nor the secondary DNS server
replied. Please check the DNS server configuration in AIMS/AMS/webAdmin.
SIP message size was reduced because it was over 1300 bytes. Optional fields
have been removed.
Session replacement succeeded, but the session to update could not be found.
parseMine()detected that the received SIP message/content does not contain the
type "application/sdp" nor "application/text" nor "message/sipfrag". The content
of the SIP message could not be parsed!
NULL address pointer
Failed to decode incoming SIP message.
Failed to get dest URL.
The SNTP synchronisation failed. The requested timer server has not
responded.
The SNTP synchronisation is ok again.
The given date/time values are impossible to configure.
Could not open the communications interface.
Could not send any data!
Incoming message tried to change future routing and failed!
Dialog establishment message contained multiple Contact: fields.
Tried to create a duplicate user!
removeUser(): User not found.
getSipProvider() was passed a non SIP URL.
The payload in the RTP attribute of the incoming SDP is empty!!!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38188
38189
38190
38191
38192
38193
ia
ia
ia
ia
ia
ia
38194 ia
38195 ia
38196 ia
38197
38198
38199
38200
38201
ia
ia
ia
ia
ia
38202 ia
38203 ia
38204 ia
38205
38206
38207
38208
38209
38210
38211
ia
ia
ia
ia
ia
ia
ia
38212 ia
38213 ia
38214
38215
38216
38217
38218
ia
ia
ia
ia
ia
38219 ia
38220
38221
38222
38223
ia
ia
ia
ia
38224 ia
38225 ia
38226 ia
38227 ia
38228 ia
answerlen too big
rdLength greater than remaining length.
Invalid SipId
Overflow!, Memory has been overwritten!
Failed to find original session when a session replacement failed!
No valid ipAddress found! Do not know how to set the MediaAddress!!!
The received media session contains more than one media sections with audio.
Don't know how to set the MediaAddress!! Param1 is the number of media
sections!
The payload is not supported by the SDP session. Param1 is the payload which
was tried to be set in the SDP session.
The sectionlist had one entry, but when we try to access it, it's NULL!!!
The SDP session did not contain an IP address. Neither in the session nor in the
section!! This shouldn't happen.
We couldn't get a section from the section list of the SDP session.
Error in media control. See param1 for exact location.
Invalid instance in timer! See param1 to find the location of this error.
Terminal received strange status message.
SIP Aamadeus Transport: Transaction failure Param0 shows the concrete
location.
SIP Aamadeus Transport: Invalid transaction type Param0 shows the concrete
location.
SIP Aamadeus Transport: Internal error in IaSatTransceiverC Param0 shows
the concrete location.
SIP Aamadeus Transport: IaSatTerminalC instance doesn't exist. Param0
shows the concrete location.
Stimulus queue overload.
Unexpected case in flow control
The media section pointer is NULL. This is not good and shall not happen!
Couldn't initialize IaSIPAamadeusTranportSettings in DB.
Vocal::Data corrupted!
Failed to send signal over the linkhandler.
Found inconsistency in SDP support evaluation. Created a codec list for Mr but
the SdpSession says something else - see param 2.
Received event from Er in an unexpected state. The event was ignored!
SDP was constructed with unsupported media type!!! Problem is located in the
application which uses the SDP object.
Stimulus size exceeds limits. Param0 holds the actual size.
Remote proxy call timed out.
Received a string from OIP that is not XML!
Received data for an unregistered protocol
SIP Account Not Available. - Parameter 1: SIP Provider (IaSipExtProviderIdC) Parameter 2: SIP External Account (IaSipExtAccountIdC) - Parameter 3: Cause
(IaSipAlarmInfoEnu)
SIP Account Available - Parameter 1: SIP Provider (IaSipExtProviderIdC) Parameter 2: SIP External Account (IaSipExtAccountIdC)
Incoming DNS header not correct. Decode failed
Failed to update control flags in the database
Invalid destination URL
REGISTER expiry time was too short. p0=external account id, p1=orig expiry,
p2=new expiry
Transaction is corrupted!, maybe it is being used after it has been deleted?
Transaction is corrupted!, maybe it is being used after it has been deleted?
The registrar handled a SUBSCRIBE request successfully, but did not return the
corresponding user instance.
Sip Registrar received a non subscribe message
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38229
38230
38231
38232
38233
38234
38235
38236
38237
ia
ia
ia
ia
ia
ia
ia
ia
ia
The myMessageObserver instance is not set in the IaSipUserAgentC
Null user point upon subscription expiration
The registrar returned no status message upon a subscription request
The dynamic cast of the event signal structure returned null
Error in Aastra SIP XML server. Parameter 1 shows the location.
Encoder wrote off the end of its buffer.
A string was truncated because the buffer was too small.
Error in the XML server, parameter 1 shows the location.
The transaction got stuck and the protection timer fired.
38238
38239
38240
38241
ia
ia
ia
ia
Error in checkTerminalData(). The concrete location is shown by parameter 1.
No valid key for terminal
The terminal id is invalid
Decode failure.
Alarm in case of reaching BLF limits -Parameter 1: SIP Username -Parameter
2: Terminal Id (0 if terminal is un-registered)
Alarm whenever a terminal attempts to subscribe after the BLF limits have been
reached - Param 1: The Username of the monitored user - Param 2: The ID of
the terminal that sent the request (0 if un-registered)
38242 ia
38243 ia
38244
38245
38246
38247
38248
38249
38250
38251
ia
ia
ia
ia
ia
ia
ia
ia
38252 ia
38253 ia
38254 ia
38255 ia
38256 ia
38257 ia
38258 ia
38259 ia
38260 ia
38261 ia
38262 ia
38263 ia
38264 ia
38265 ia
38266 ia
38267 ia
38268 ia
There was an overflow in while converting the registration expiry time to msec
The phone-number of the user passed in is was not in the initial notification
Wasn't able to find a "Via: SIP/2.0/" string in the sent data
An attempt to send data over TCP failed and we had to switch to UDP
Data is pending
Data is pending
The maximum number of SIP Message TCP-fragments is reached
Parsed the Content-Length header, but was unable to read its value
Parsing of reccords failed! The counter variable becomes negative --> high
number....
Can not move the pointer! out-of-bount ...
The number of recursion restriction hit.
An INVITE Server transaction received an ACK while in the "Proceeding" state
and was terminated (see br42584)
This session did not receive an ACK for OKRetransTimeout and shall be
terminated
Unable to bring the PBX LDAP server socket in service!
Could not make tcp client socket - Tcp socket limit reached Params: Open,
Listening, Limit
Could not create tcp server sockets - Tcp socket limit reached Params: Open,
Listening, Limit
The tcp client socket connection timed out
E-mail send failed
Can be reported after error-id 38261 (E-mail send failed) to add some
informations
function IaGmsSmtpClientTimerC::handleExpiry: smtpClientP is NULL
function IaGmsSmtpClientC::handleConnectResponse called with an error-id
(high-word of parameter0)
function IaGmsSmtpClientC::doErrorAction: unexpected errorState (high-word of
parameter0)
function IaGmsSmtpClientC::doErrorAction: transient socket error (errorAction in
high-word of parameter0)
function IaGmsSmtpClientC::doErrorAction: transient-error (SMTP-RespNum in
high-word of parameter0)
function IaGmsSmtpClientC::doErrorAction: timeout-error
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
38269 ia
38270 ia
38271 ia
38272 ia
38273 ia
38274 ia
38275 ia
38276 ia
38277 ia
38278 ia
38279
38280
38281
38282
38283
ia
ia
ia
ia
ia
38284 ia
38285 ia
38286 ia
38287 ia
38288 ia
38289
38290
38291
38292
38293
38294
38295
38296
38297
38298
ia
ia
ia
ia
ia
ia
ia
ia
ia
ia
38299 ia
38300 ia
38301 ia
38302 ia
function IaGmsSmtpClientC::getStateAlarmParam: a state is not filled in the
function
function IaGmsSmtpClientStateC::prepareForNextState (base-class) is called,
which should not be done
function IaGmsSmtpConnSocketStC::handleState is called, which should not be
done
function IaGmsSmtpRsetStC::checkStateDataResp: negative answer on resetcommand
function IaGmsSmtpQuitStC::checkStateDataResp: negative answer on quitcommand
function IaGmsSmtpClientC::deleteSmtpClientAndCheckIfNewEmail: the SMTPclient to delete is not found in ourSmtpClientContainer
function IaGmsSmtpProcC::sendUpdateSatelliteCfg: negative answer from
OsLnhDeviceSynchFacadeC::osLnhSend
Satellite received MajorMinor(MajorNetworkEvent, NodeInService), which should
not happen
Master/Stand-alone received MajorMinor(MajorIaGms,
IaGmsUpdateSmtpClientCfgSig), which should not happen
function IaGmsSmtpProcC::handleSig: received signal in the default of the signalswitch got a negative answer from DlSktAsyncSocketC::handleSig
Parameter recipientList or subject or attachedFileName of function sendEmail is
too big
Remote proxy call timed out.
openSocket() failed.
Failed to generate RSA keys.
Failed to decrypt data
SRM: One of the connection parameters which has been received are not filled
in. The SRM data connection could not be established.
SRM: The received checksum didn't match the calculate one. The data
connection to the SRM server couldn't be established.
SRM: The received data did not match the length of 48 chars. The data call to
the SRM server couldn't be established.
An outgoing INVITE through a SIP Provider account has been suppressed
because registration with the Provider is required but we are currently not
registered
Failed to initialise web server
It is not allowed to perform a "inform" request when the DHCP client session was
used obtain all IP settings from the DHCP server.
Couldn't store date/time of file in string
Couldn't open file "/home/logs/statistic/sip/siplog.txt" for writing
problems zipping the log file
Received a NOTIFY for a REFER in the wrong state
Received a SIP Refer transfer command in an inappropriate state
Failed to create DoS object.
Unused
Unused
Unused
The received call related can't be handled, because it doesn't match either of the
terminals calls. (param1: bcsRef of the event, param2: bcsRef of the primary
call, param3: bcsRef of the secondary call)
The Event Dispatcher Factory is deleted. All Subscription contexts are lost.
File uploaded to CPU2 is too large and has been aborted. P1 is the size
attempted.
Unexpected status message in call from terminal. Parameters: 1. call state 2.
IP address of the terminal 3. Upper 16 bits: SIP method, lower 16 bits: Status
Code
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
42001
42003
42004
42005
42006
42007
d3
d3
d3
d3
d3
d3
42008
42009
42010
42011
d3
d3
d3
d3
42012
42013
42014
42015
42016
d3
d3
d3
d3
d3
42017 d3
42018 d3
42019 d3
42020
42021
42022
42023
42024
42025
d3
d3
d3
d3
d3
d3
42026
42027
42028
42029
42030
42031
42032
42033
42034
d3
d3
d3
d3
d3
d3
d3
d3
d3
42035
42036
42037
42038
42039
42040
42041
d3
d3
d3
d3
d3
d3
d3
42042
42043
42044
42045
42046
42047
d3
d3
d3
d3
d3
d3
error mapping D3SysSevEnuC to MaSysSevEnuC
Error in device controller
Error in the device
Error in the pocket adapter
Error with the system base
Error with the terminal device
System Base has sent the stimulus "Soft Mute" which is no longer handled in the
PBX.
PortNbrMax must be greater than SmPortReferenceC::Max.
SBC received a TgDs signal with an unexpected minor type
SBC received a DpLog signal containing a request that it didn't understand.
SBC received a L3Error message from the system base in a state other than Go.
StatusResp with unknown or wrong parameter received from system base.
StatusChange with unknown parameter received from system base.
Unexpected stimulus received from system base.
Invalid DECT-License. Check the DECT-License on the license chip
L3-Error received from system base. Parameters: portid (LA/SB), prog-status,
system-status, reset-cause,
os-exc-old, os-exc-new, dest-id, event-id,
paramH, paramL, stim-code, state
Too much power needed on this port reason : probably a system base is plugged
on the same port as a terminal
New created D3Ad2SbcC object already existing in ourSbc[i]. This should never
happen!
The maximum of system bases for this pbx is already reached. This system base
gets disabled.
Destructor for an object called which was not found in ourSbc[i].
Wrong or unexpected major received.
Unexpected inTmoType.
Wrong or unexpected minor.
timeout during power check.
We must go in state error, but no more errorlog needed. (Already reported in
dpAllDbCreateSysBase).
system base didn't respond to log request.
SbcTmoStatus timer expired.
An error occured in the Ad2 test agent
No DpDectNetwork object available during system base start up
stop request for the specific terminal
D3Ad2Device not found.
ourSbc array is full!
Device not found.
Attribute RFPISentToDevId != Undef during the start up of the primary AD2Interface.
Unknown system base type.
Unexpected status information.
System base didn't response to a system capability message.
// System base didn't response to a setup dect message.
Secondary Start up conditions not fulfilled. Devices get disabled.
Wrong line length. This system base needs a reset.
This id is used for a system bases power supply alarm. It gets generated if a
local power supply is needed but none is connected.
Primary device not found.
Prxi requested a reset for this port.
System base with myDevId not found
Unexpected message in this state.
SbcTmoStCh timer expired.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
42048
42049
42050
42051
42052
d3
d3
d3
d3
d3
System base didn't response to a layer 3 status message.
portRef and channelId not found for the specified terminal id.
terminal id not found for the specified portRef and channelId.
A DECT systembase is missing at the startup
Wrong synchState: Sync TS could not be connected to the system base
42053
42054
42055
42056
42057
42058
42059
42060
42061
42062
42063
42064
42065
42066
42067
42068
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
Model Message too big. More than 255 Msg Sequences: 255*96 = 24480 Bytes
No device found for this termId
No valid ring rhythm
DeviceId not found
Something is strange with the ring rhythm
Strange melody
Unknown partner ring pattern
Unknown partner ring pattern
Unknown partner ring pattern
Unknown partner ring pattern
No valid ring rhythm
No display action defined.
Unknown display action.
Unknown icon. Param1: unknown icon (AamIconEnu)
Unknown symbol state. Param 1: unknown state (AamSymbolStateEnu)
Unknown symbol. Param 1: unknown symbol (AamSymbolEnu)
function hdlAamadeus, minor AamdeusKeyDef, no existing myKeydriver no
longer used since i76 step 14
function hdlTgAd2Sig, minor TaAd2Received, no existing myKeydriver no
longer used since i76 step 14
function hdlTTgCpSig, minor TTgCpIkc*, no existing myKeydriver no longer
used since i76 step 14
function hdlTTgCpSig, wrong minor
function hdlAamadeus, wrong minor
function hdlTTgCpSig, minor TTgCpIkc*, no existing myKeydriver
function hdlTTgCp, wrong minor
function hdlTgAd2, minor TTgCpIkc*, no existing myKeydriver
function hdlTgAd2, wrong minor
function hdlSig, wrong major
function hdlTTgCpSig, no portRef and chanId for termId
Wrong state
Device not available
Unknown led state. Param1: ledId (D3Ad2AamLeddriverC::LedId) Param2:
unknown state (D3Ad2AamLeddriverC::LedState)
Unknown led. Param1: unknown led (D3Ad2AamLeddriverC::LedId)
function stateMachine, wrong stimuli type
function stateMachine, wrong key definition
function handleTimeout, wrong minor
ATM-Handshaking: AamadeusSend received but AtmFifoEmpty
function stimLen, not expected value
function stimStartParam, not exptected value
function makeActionStim not expected activation
function fsmError called
Unexpected Minor
Unexpected Stimuli
Error in hook detection IKC of D3
StatusChange timeout
StatisChange timeout
StatusResponse timeout
Unknown SwDl timeout
42069 d3
42070 d3
42071
42072
42073
42074
42075
42076
42077
42078
42080
42081
42082
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
42083
42084
42085
42086
42087
42088
42089
42090
42091
42092
42093
42094
42095
42096
42097
42098
42099
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
42100
42101
42102
42103
42104
42105
42106
42107
42108
42109
42110
42111
42112
42113
42114
42115
42116
42117
42118
42119
42120
42121
42122
42123
42124
42125
42126
42127
42128
42129
42130
42131
42132
42133
42134
42135
42136
42137
42138
42139
42140
42141
42142
42143
42144
42145
42146
42147
42148
42149
42150
42151
42152
42153
42154
42155
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
Invalid StatusResp Message content
Unexpected Stimulus
Invalid StatusChange message content
Unexpected Stimuli during SwDl erase
Invalid StatusChange message content
Invalid StatusResponse message content
Unexpected Stimuli during SwDl write
Downloadable code missing
Downloadable code checksum error
Downloadable code address error
Wrong length in StatusResponse Msg (SwVersionStructure)
RespFailCounter expired
EraseFailCounter expired
WriteFailCounter expired
SwDlL3Error
SwDlL3Error
Unexpected Stimuli
Unexpected Stimuli
Unexpected Minor of MajorTerm
ATM-Handshaking: Retransmission needed
Wrong message content in StatusChange
L3AD2DLTimeout but mySwDlP == NULL
Unexpected L3DevAaCpuTimeout
Wrong msg content in DppSigTStatusResp
Unexpected Major
This function should never be called.
SwDlRes received but no SwDl in progress
ATM-Handshaking: Too many retransmissions
ATM-Handshaking: Wrong SeqId/NbrOfSeq
ATM-Handshaking: DppSigTAtmCfm received but AtmFifo is empty
Unexpected Minor
Unexpected Minor
Unexpected Minor
Invalid ATM stimuli length
ATM: Checksum error
ATM: Sanity test (segment count and segment number) failed
ATM: Sequence order check failed
Unexpected statusInfo in statusChange Msg
actSwDlEnd() called but mySwDlP == NULL
Office70/80 Reset
Unexpected Stimuli
SwDlRes ignored (wrong msgId)
Unexpected Stimuli
ATM-Handshaking: AamadeusSend received but AtmFifoEmpty
ATM-Handshaking: Retransmission needed
Device not available
Wrong state
Wrong state
Unexpected Minor
Unexpected signal type
Unexpected device type
Unknown device
Unknown ring type
Unknown ring mode
AudioSequenceId exceeded
Updating ring rhythm failed. Pattern not found.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
42156 d3
44001 fs
44002 fs
44003 fs
44004 fs
44005 fs
44006 fs
44007 fs
44008 fs
44009 fs
44010 fs
44011 fs
44012 fs
44013 fs
44014 fs
Incompatible terminal type on A4xx PBX. Office 20, 30, 40 are not supported any
more. Parameter 1: myTermId Parameter 2: myTermType (1=Office 20,
2=Office 30, 3=Office 40)
File System run out of memory. Deleting partwritten file, calling house keeper
might help. If not, memory is full uf unique segments (valid data).
Reading from flash failed because of a checksum error. The only case this
happens is when two processes read and write concurrently from the same flash
or the flash is gone.
This means the FS has reached the maximum possible number of files. Since
this number will be reached only if the FS is full of one segment files this means
also the FS is full.
We can't format the file system. Panic! Crash!
This signal is unknown by the filesystem
Could not close the directory stream. This could end with a crash because of
missing detaches.
Trying to call unimplemented function freopen(). OSE 4.4.1 does not support the
function freopen(). NULL is returned
Unexpected signal
funct. fsEfsStat() detected a problem with the status of the file in the root dir.
Caller to fsEfsVsnprintf has written more than the absolute maximum. P1=bytes
written, P2=maximum, P3=process ID of the caller
Caller to fsEfsVsnprintf has attempted to write off the end of their buffer! This has
been blocked to prevent corruption of the OSE buffer pool. P1=size of attempted
write, P2=buffer size, P3=process ID of the caller.
systemcall opendir failed. Parameter 1: errno, Parameter 2&3: first 8 characters
of dirname
systemcall rmdir failed. Parameter 1: errno, Parameter 2&3: first 8 characters of
dirname
systemcall chdir failed. Parameter 1: errno, Parameter 2&3: first 8 characters of
path
44028 fs
systemcall remove failed. Parameter 1: errno Parameter 2: 1st part of the file
name to be removed Parameter 3: 2nd part of the file name to be removed
systemcall create failed. Parameter 1: errno, Parameter 2: mode, Parameter 3:
first 4 characters of filename
systemcall close failed. Parameter 1: errno, Parameter 2: fildes
systemcall closedir failed. Parameter 1: errno
systemcall fopen failed. Parameter 1: errno, Parameter 2: mode, Parameter 3:
first 4 characters of filename
systemcall rename failed. Parameter 1: errno
systemcall fclose failed. Parameter 1: errno
systemcall open failed. Parameter 1: errno, Parameter 2: oflag, Parameter 3:
amode
systemcall fdopen failed. Parameter 1: errno, Parameter 2: fildes, Parameter 3:
first 4 characters of mode
Could not close the directory stream. This could end with a crash because of
missing detaches.
Could not append "/" to a directory string. Directory service will fail.
Try to free an id which was not allocated.
The file system usage is over the critical limit. p1: FsFileTypeIdC p2: used size
p3: reserved size
The file system usage is under the critical limit again. p1: FsFileTypeIdC p2:
used size p3: reserved size
44029 fs
The file system usage is OVER the critical limit.
44015 fs
44016 fs
44017 fs
44018 fs
44019 fs
44020 fs
44021 fs
44022 fs
44023 fs
44024 fs
44025 fs
44026 fs
44027 fs
TI 1053
18.01.2011
p1: FsFileTypeIdC p2: usage
List of Error-ID's out of Aastra Intelligate
44035 fs
The file system usage is UNDER the critical limit again. p1: FsFileTypeIdC p2:
usage
Unable to determine physical size of filesystem. Assuming a 64MByte filesystem.
This errorid is used in fsefsobserverc.cc as well
Could not insert new element into myStreamContainer (map) because element
does already exist. 1.Parameter = Position of existing element, 2. + 3.Parameter
= Filename
Could not insert new element into myPrebarContainer (map) because element
does already exist. 1.Parameter = Position of existing element, 2. + 3.Parameter
= Filename
Could not delete element from myStreamContainer (map). 1.Parameter = Size of
myStreamContainer, 2. + 3.Parameter = Filename
Could not delete element from myPrebarContainer (map). 1.Parameter = Size of
myPrebarContainer, 2. + 3.Parameter = Filename
44036 fs
Could not delete element from myStreamContainer (map) in case __real_fclose
failed. 1.Parameter = Size of myStreamContainer, 2. + 3.Parameter = Filename
44030 fs
44031 fs
44032 fs
44033 fs
44034 fs
44037 fs
44038
44039
44040
44041
fs
fs
fs
fs
44042
44043
44044
44045
44046
fs
fs
fs
fs
fs
44047 fs
44048
44049
44050
44051
44052
46001
fs
fs
fs
fs
fs
is
46002 is
46003 is
46004 is
46005 is
46006 is
46007 is
46008
46009
46010
46011
46012
is
is
is
is
is
Could not delete element from myPrebarContainer (map) in case __real_fclose
failed. 1.Parameter = Size of myPrebarContainer, 2. + 3.Parameter = Filename
The path parameter to confirmPath() is garbage. Parameter 1 = endPos,
Parameter 2 = InvalidPos
The subdirectory could not be created. Parameter 1 = errno
changing of directory failed. Parameter 1 = errno
returning to the original working directory failed. Parameter 1 = errno
Error while copying a file - the file might be corrupt. Param1: Bytes read during
the last read cycle. Param2: Byte written during the last write cycle.
FsEfsInformationC::getDirName() called with FsFileTypeId::Undef
FsEfsInformationC::getUsedSize() called with FsFileTypeIdC::Undef
FsEfsInformationC::getReservedSize() called with FsFileTypeIdC::Undef
FsEfsInformationC::getDirSize() was passed an invalid fileType
FsEfsNotificationHdlC::notifyDirSizeLimitAlreadyReached() called with fileType
== FsFileTypeIdC::Undef
FsEfsNotificationHdlC::notifyDirSizeLimitAlreadyReached() called with
localNodeId == ArNodeIdC::Undef
Delete reply command id is unknown. p1: command id p2: errno p3: Rename reply command id is unknown. p1: command id p2: errno p3: Directory reply command id is unknown. p1: command id p2: last p3: Prebar reply command id is unknown. p1: command id p2: - p3: Junk unexpected signals, how rude! P1: (UInt32)sig->sigNo
An unexpected signal received. P1: (UInt32)MajorOf(sigP->sig) P2:
(UInt32)MinorOf(sigP->sig)
An unexpected signal received. P1: (UInt32)MajorOf(sigP->sig) P2:
(UInt32)MinorOf(sigP->sig)
An unexpected signal received. P1: (UInt32)MajorOf(sigP->sig) P2:
(UInt32)MinorOf(sigP->sig)
An unexpected signal received. P1: MajorOf(aSignalP->sig) P2:
MinorOf(aSignalP->sig)
To attach a PPP device within INET failed. P1: (UInt32)unit
The max of PPP devices has been reached!
An unexpected signal received. P1: MajorOf(aSignalPtr->sig) P2:
MinorOf(aSignalPtr->sig)
Someone tries to attach a TA device twice.
Invalid state! P1: (UInt32) getState()
We are definitely in the wrong state. P1: (UInt32)getState()
We are definitely in the wrong state. P1: (UInt32)getState()
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
46057 is
46058 is
buffer overflow in PPP socket > 3000 bytes
no valid instance (null pointer) of IsPPPSocketLinkPtr.
Data length is 0. Don't forward it to the PPP stack.
Gateway is not reachable, please check your Ethernet config! P1=ipAddress,
P2=netwask, P3=gateway
PPP IP address range too short.
The inactivity timeout was not treated.
Detected a NULL pointer in ppp_io_print().
Login info structure is a NULL pointer!
Unexpected signal
The magic DHCP cookie must always exist.
Timeout while waiting for the DHCP ack signal from smSysProc_.
Cannot configure DNS client if the IP address of both, primary and secondary
DNS server are invalid.
The DHCP client has reported a failure status.
Unexpected DHCP status.
Failed to find IsQOSSettings settings
Invalid L3 QoS tagging type
Satellite calling getLoginInformatio()!!
The identification between the DNS query and the DNS answer failed. The
answer from the DNS server was not expected.
Unexpected QoS tag type.
QoS settings not found.
Unexpected status in DHCP_RELEASE_REPLY received.
Timeout while waiting for the DHCP_RESPONSE signal from ose_dhcp_.
sendData() was passed a dud pointer
Attach of ethernet interface failed.
Detach of the ethernet interface failed.
Configuration of INET with ethernet failed.
Could not add the requested route.
Could not bring down the ethernet interface.
Could not configure the netmask.
Could not configure the IP address.
INET up reply has bad status value.
Could not bring up the ethernet interface.
Down Reply has bad status.
Unknown connection type.
Cannot find the switching table entries.
We got rror EWOULDBLOCK when trying to send as a result of select() saying
that it is possible to write now.
We run out of NAPT ports!
The port map is screwed up!!!
Ups, the total length of the IP frame is smaller than the IP and TCP headers! We
treat this failure like a TCP frame which carries no data.
The data buffer is longer than expected.
A corrupt sockInfo entry has been found in the socket mapper!
The dhcp client management failed!
The dhcp client configuration failed!
Response from select process timed out!
Modification of the RTP switching table failed. Parameter 1 gives the location: 0
and 1 is in addEntry, 2 is in removeEntry. Parameter 2 holds the udpTableIndex.
Parameter 3 holds the dspTableIndex.
Couldn't configure a INET socket to none blocking.
46059 is
46060 is
Someone tries to bind a port to a socket which is already occupied by a listener.
Couldn't stop the event interface.
46013 is
46014 is
46015 is
46016
46017
46018
46019
46020
46021
46022
46023
is
is
is
is
is
is
is
is
46024
46025
46026
46027
46028
46029
is
is
is
is
is
is
46030
46031
46032
46033
46034
46035
46036
46037
46038
46039
46040
46041
46042
46043
46044
46045
46046
46047
is
is
is
is
is
is
is
is
is
is
is
is
is
is
is
is
is
is
46048 is
46049 is
46050 is
46051
46052
46053
46054
46055
46056
is
is
is
is
is
is
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
46061 is
46062 is
46063
46064
46065
46066
is
is
is
is
46067 is
46068 is
46069 is
46070 is
46071 is
46072
46073
46074
46075
46076
46077
46078
46079
46080
46081
46082
46083
is
is
is
is
is
is
is
is
is
is
is
is
46084 is
46085 is
46086 is
46087 is
46088 is
46089 is
48001
48002
48003
48004
48005
48006
um
um
um
um
um
um
48007 um
48008 um
We are dealing with a blocking socket. The eventhandler is not designed for that!
INET sytem call failed. fcntl(
Throw the new buffer away as the caller has been told not to send anymore and
ignored that.
INET system call failed. (getpeername)
INET system call failed. (getsockname)
Duplicated INET socket descriptor detected. Ignore adding it to the read list.
Duplicated INET socket descriptor detected. Ignore adding it to the listener list.
Duplicated INET socket descriptor detected. Ignore adding it to the write list.
The creation of the requested DNS entry failed.
The request to add a new entry was not executed due to corrupt tables. There is
a mismatch of RTP resources!
The tables point not to the same resource! The resource is not removed but
tagged as invalid!
There is a mismatch with the internal RTP resources! The tables have tagged
the entry as invalid.
Failed to create database instance
INET system call failed. setsockopt()
Data length is 0. Don't forward it to the PPP stack.
Failed to join the IP multicast group
None IP multicast address used
To leave the IP multicast club failed.
Could not re-configure the IP TTL value for the given multicast socket.
Was not able to configure explicit the multicast interface.
Was not able to switch off the mulitcast loop back.
Corrected index due to overflow.
FmHandle and SocketId mismatch!
Switching parameters in port entry are out of range. Parameter 1: DSP module
slot ID (high 16 bit), DSP ID (low 16 bit) Parameter 2: DSP internal channel ID
Parameter 3: DSP class instance pointer
Proxy interface timeout
The counter of active to net connections is not maintained correctly. Parameter
1: counter value, Parameter 2: 0, Parameter 3: 0.
The link destination ethernet MAC address was not received in time. The to net
direction will have no audio because of this error. Parameter 1: remote IP
address, Parameter 2: remote UDP port, Parameter 3: ARP timeout counter
value.
DoS: An IP address was added to the blocked list.
DoS: An IP address was removed from the blocking list
This errorid is used to generate an alarm when the link between the session
handler and the external SME is down.
Length mismatch
Imvalid packet length
Unrecogised tag.
Someone tried to delete the Sequence Number Allocator singleton!
Failed to find external session pointer in container.
The instance of the SMSC was not found in the DS. Could not update timer
values.
The creation of a timer phantom failed in the restoreSMSC method. So it was not
possible to activate the SM stored in the DS. Param1 is the SM Identifier
(SequenceNumber) which is still the DS.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
48009 um
48010 um
48011 um
48012 um
48013 um
48014 um
48015 um
48016 um
48017 um
48018 um
48019 um
48020 um
48021 um
48022 um
48023 um
48024 um
48025 um
48026 um
48027 um
48028 um
The creation of a timer phantom was not possible while the SM was prepared to
send to an externESME. Note the SM is stored in the DS but no retrans-/validity
timer was started!! The param1 is the SM Id (sequenceNumber) of the short
message.
It was not possible to create a temporary phantom. The SM to an internal
subscriber was not possible. The param1 is the source address, param2 is the
destination address.
It was not possible to create a timer phantom during the preparation of a Deliver
msg (ACK) which was send to an external ESME. Param1 is the Id for the SM
stored in the DS.
The creation of a timer phantom failed during the preparation of a Deliver Ack
which was sent to the external ESME. Note the SM is stored now in the DS. The
Id of the SM is copied to the Param1.
The TA in the DS failed. The data is not stored in the DS. If this happens, it
seems to be that the system has major problems. Maybe it's better to reset the
PBX. The Param1 indicates which of the used TA in the code causes the
problem.
The ESME sent the SMSC a Deliver msg with a commandStatus which is not
handled. The Param1 indicates the received commandStatus.
The pointer to the SMPP PDU in the method deliverRespMessage() was NULL.
The pointer to the generated Deliver was NULL. It seems that the SMPP library
has a problem in the make method.
Either the pointer to the Submit message or the Id of the ESME was NULL or
Undef. This is a system error and should not occure.
The external session handler which belongs to the Id of the ESME was not found
in the map. So either the external session handler died or the map which
contains the sessionHdl and the EsmeId is corrupt. If this error occurs a restart of
the PBX is maybe ne
An internal DeliverResp message contained a message type which was not
expected. The Param1 contains the type.
The commandStatus of the internal DeliverResp contained an unexpected value.
The value is copied to Param1.
The requested DataCoding in the received Submit (external) is not supported by
the SMSC. Param1 contains the requested DataCoding.
The numberinplan cache has a problem with the destination address of the SM.
The SM was not delivered to the destination. If this happens, maybe it's time to
restart the PBX.
The ESME Id which is stored in the PISN instance in the DS does not match an
existing ESME instance. It's most likely that the system is corrupt. Param1
contains the destAddr, Param2 contains the destEsmeId.
The destAddr is not a PISN. Seems to be that the Xa fct. analExact() has a
problem or the system is corrupt. Param1 is the reveived DestAddr, Param2 is
the numRef which was returned from the Xa fct.
The default ESME was not found by the system. This should not happen,
because the consistency checks in the configuration prevent this. So we crash
the system.
Received an alertNotification where a SM is stored in the DS but no timer
phantom does exist!!!! This can only happen in the handleDeliver() where it was
not possible to create the timer phantom. An error must already exist! Param1 is
the SM Id in the DS.
It was not possible to create the SM in the DS. Param1 is the srcAddr, Param2 is
the destAddr. Note: This is only a warning. The problem was propably that the
maximum of stored SMs was reached.
The UmSmpRegisteredDeliveryC contained a value which is unkonw by the
SMSC. Param1 contains theceipt value.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
48029 um
48030 um
48031 um
48032 um
48033 um
48034 um
48035 um
48036 um
48037 um
48038 um
48039 um
48040 um
48041 um
48042 um
48043 um
48044 um
48045 um
48046 um
48047 um
48048 um
48049 um
48050 um
48051 um
48052 um
The deliver msg contains an UmSmpEsmClassC::MessageTypeEnu which is not
kown by the SMSC. Param1 contains the received value.
The mapping between the sequenceNumber of the SM and the SM Key to the
DS has failed. Seems to be that the map is corrupt. Param1 is the
sequenceNumber.
Seems to be that somebody has deleted the ESME from the system or if this is
not the case, the system is corrupt!! Param1/2 contains the src-/destAddr where
the Deliver Ack should be send to.
The shortMessage Id does not match a SM stored in the DS! The Deliver Ack
could not be send to the originator which has requested this in the Submit.
Param1/2 contains the src-/destAddr. Param3 contains the sequence number of
the SM.
The origination side of the SM was an external number which should not
foreseen in the 1st phase of the messaging. Param1 contains the number.
The method handlePhanDelValidTimerExpiry() was called on a temporary
phantom. This is wrong, a tempPhantom has no valditiy timer started!!! Coding
error!
The method handlePhanDelRetransTimerExpiry() was called on a temporary
phantom. This is wrong, a tempPhantom has no retransmission timer started!!!
Coding error!
The method handleAlertNotify() was called on a temporary phantom. This is not
correct!!
The pointer to the external session handler was NULL! So either the
configuration has changed and the ext.SessionHdl hasn't killed the response
timer or a system error happened.
The response watchdog contained a CommandId which is not handled in the
timerExpiry method. [
The extSessionMux called the method handleIncomingConnection() which is not
allowed.
The construction of the SMPP PDU failed in the make() method of the SMPP
library. The input data for the PDU were received from the DL socket.
The dataP or the length of the dataP received from the DL socket was set to
NULL/0.
Somebody send us a SMPP PDU but we were not bound to this peer! Param1 is
the IP Addr. of the peer.
The SMPP PDU which was received contains a commandId which is not handled
in the ExtSessionMux. Param1 contains the commandId.
DL reported an error during the sending of the SMPP PDU. Param1 is the Dl
error.
The send method of the UDP socket returned false, the SMPP PDU was not
send.
An Unbind message was received by the extSessionHdl from the peer, but the
session was already unbound. Param1 is the IpAddr of the peer which sent the
unbind req.
The session handler received an unBind response, where the commandStatus
contains an unexpected value. Param1 is the commandStatus, Param2 is the
peerAddr
The peer sent us a deliverResp which contains a SeqNb that is not known in our
SMSC. Param1 is the seqNr, Param2 is the IpAddr of the peer.
The class variable where the IP Addr of the Peer is stored, contains the value
NULL. This should not happen. Coding error or system has a problem.
The peer sent us an EnquireLink request and the session was not bound.
Param1 contains the Ip Addr of the peer.
The submitMessage returned an error. This should not happen.
The pointer to the SMSC singleton was NULL. This should not happen.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
48053 um
48054 um
48055 um
48056 um
48057 um
48058 um
48059 um
48060 um
48061 um
48062 um
48063 um
48064 um
48065 um
48066 um
48067 um
48068
50001
50002
50003
50004
50005
50006
50007
50008
50009
50010
50011
50012
50013
50014
50015
50016
50017
50018
50019
50020
50021
50022
um
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
er
The deliverRespMessage in the SMSC returned an error. This should not
happen.
The storage capacity of the SMSC exceeded, the deliver Acknowledge to the
orignation side could not be sent. Param1 is the source address, Param2 the
destination address.
Number of stored SMs in the DS is inconsistent to the counter in the SMSC.
Param1 is the number found in the DS, Param2 is the counter in the SMSC.
Caller passed a NULL pointer to a library function.
The pointer to the external session handler is NULL, which is strange because 5
lines above it was valid.
The encryption status of the received SMPP Pdu does not match the setting of
the encryption for this ESME in ASCOTEL. Param1 Encryp of PDU, Param2
Encry in DS of ASCOTEL.
The response timer of a temp. phantom could be stopped because it seems to
be that it was expiring at that very moment. This is only a warning to see how
often this will happen. The errorReport is only temporarily.
The
ere is no license for SMPP.
The decoded PDU does not match the decoded command ID. P1 is the
command ID
While restoring the SMSC, it was not possible to send the DELIVER message to
its related interface. Param1 is the new seqNb generated by the SMSC, param2
is the source addr., param3 is the destination addr.
A short message was deleted after the destination hasn't responded and the
validity time expired. Note the short message was not delivered. Please verify
that the response timer has a proper value. Param1, Param2 and 3 are: seqNb,
source, destAddr.
We seem to have lost a timer expiry message!, oops.
The external session either does not exist or it is not bound.
The SMs was not stored in the DataStorage because of internal storage
problems. The SMs is deleted from the SMSC.
Restoring the SMSC durning startup of the PBX, reported an error.
The setSeqNumber() of the persistent shortMessage failed. The delivery of this
SM is skipped!!
Telephony: the tuple already exists in the map
Telephony: the tuple does not exist in the map
Telephony: invalid bcsRef
Telephony: invalid portRef
Telephony: invalid callRef
Telephony: cannot allocate callRef
Telephony: cannot allocate bcsRef
Telephony: invalid signal pointer
Telephony: invalid signal major
Telephony: wrong protocol type
Telephony: unknown sender process
Messaging: invalid signal minor
Messaging: unknown destination process
Messaging: sequence number not found in the cache
Messaging: unexpected message type
Messaging: unexpected destination type
Messaging: unexpected subscriber category
Messaging: invalid group destination number
Messaging: no members in the message group
Messaging: unknown destination location
Telephony: cannot map signal
Telephony: unexpected TEP type
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
50023 er
50024 er
50025 er
50026 er
50027 er
50028 er
50029
50030
50031
50032
50033
50034
50035
er
er
er
er
er
er
er
50036 er
50037 er
50038
50039
50040
50041
50042
50043
50044
50045
50046
50047
er
er
er
er
er
er
er
er
er
er
50048
50049
50050
50051
er
er
er
er
50052 er
50053 er
50054 er
50055 er
50056
50057
50058
50059
er
er
er
er
50060
50061
50062
50063
er
er
er
er
50064 er
50065 er
50066 er
ER Telephony: unmatched portRefs
ER Telephony: incoming TaCe signal contains invalid bcsRef
ER Telephony: port incorrectly configured
ER Telephony: call reference value is not valid in the pool and thus it cannot be
deallocated
Telephony: invalid signal minor
Messaging: unexpected sender process
ER Messaging: the cache size increased above the normal limit (seqNr hangers
?)
Messaging: unexpected response for message to group
ER Telephony: too many facility info elements
ER Messaging: the sender subsId has no number
Telephony: invalid parameters in bcsRef map accessor function
Telephony: unexpected signal in XA bridged function fillInHead.
The PCl state machine received an unexpected event.
The port was neither a SIP Trunk nor a SIP user !!! Something is wrong with the
portRef which the SIP adapter received.
Our session pointer is NULL!! This is more than strange!!!
Somebody tried to free a B-Channel in our B-Channel pool which is already
free!!!!
The termination side was incorrect or invalid!!
Setup received for external SIP without valid channel-id.
bcsRef not found in mapping table for SIP call.
Invalid channel id received for an external SIP call.
Invalid Port Reference or Port Type for SIP
There is already such an entry stored in the mapper.
There is no such entry stored in the mapper.
Problem with call id map.
A connect is not allowed in this state!
It was not expected that this peer is the sender of this message. Param1 shows
the sender side.
Undefined S2 message type (filled in param0).
Message decomposition error.
The given Called Pty Number was not found in the numbering plan.
Wrong mode (either Connection or Tone) to get the call related data from RM.
Not all possibilities have been verified to set the data to get the call related IP
data from RM.
Trying to create a mapping with an invalid callId or bcsRef.
Trying to send a message to XA with an invalid bcsRef. Paramters: bcsRef,
callId, sigNr (Major and Minor)
We received a TaCeONotify containing a NotifyDescription which we do not
support at the moment. Param1 contains the coding of the description.
The called method is not implemented!!
The session does not support this method!!
The termination side was wrong.
The pointer to the interface of the endpoint was NULL, so we couldn't
send/forward the request!!
This method is not implemented!
This method shouldn't be called!
The pointer to our Call Handler is NULL!!!
This method is not implemented in the base class and should never be called.
This is a clash situation during the call termination.
Error while handling a MediaUpdate related signal. Parameter 1 shows the
location.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
52022
52023
52024
52025
ag
ag
ag
ag
52026
54001
54002
54003
54004
54005
54006
54007
ag
mr
mr
mr
mr
mr
mr
mr
We received from SIP neither a provider Id nor a terminal id!! The call will not be
successful.
Error in sessionMap management. See param1 for exact location.
An call transfer was signalled for an interface SIP user, this should only take
place on a trunk
Connection to IP terminal lost
Invalid terminalId received from TP
Invalid msn received from CR
Invalid Msn received in Software upload signal
AgAllSocket *mySocket is zero. Invalid!
Invalid terminal type received
Connection to IP-Phone reestablished. Param1 is the subscriber number.
Signal for non existing device received
Signal for non existing socket received
Invalid signal for Ag domain received
Unexpected database problem
The IP Phone signalled either an upload complete or upload request to the PBX.
This minor is not handled at the moment.
Data could not be sent through DL socket (network problem?). Phone
deregistered.
CR signal received for an already deregistered phone
The service 'getMasterIpAddress' returned an undefined ip address
Internal error.
Unexpected message
Invalid stimulus contents
Deleting a device, which has an active connection.
alarm: NotEnoughOfficeIPLicences We ran out of OfficeIP licences - sorry it is
not possible to register any further IP-Phone.
alarm: AgainEnoughOfficeIPLicences This is the indication that it is possible to
register further Office IP-phones to the PBX.
Invalid switching command for MSN. Param1 is MSN Param2 is PeerIPAddr
Param3 is PeerRTPPort and LocalRTPPort
Timed out while waiting for response from MaSum
Deleting a device interface, which will be used later, part1
Deleting a device interface, which will be used later, part2
Sw upload request to Ma timed out. No response received for about 10sec. Ma
seems to be busy or does not handle the SwUploadInfo signal.
The persistent MrOfficeIPTerminal object could not be found.
Attempt to change forced codec settings
The corresponding BandwidthControlArea database object couldn't be found!
srcNE should point either to routerA or to routerB
the boundary MrNwkRouterC objects should already exist
the persistent MrWANLink object should already exist
the boundary MrNwkLANSegmentC objects should already exist
54008
54009
54010
54011
54012
54013
54014
54015
mr
mr
mr
mr
mr
mr
mr
mr
getSegmentForDest(): No explicit or default rule could be found for destination.
Route to reuse doesn't exists.
Insufficient Bandwidth for the new Media Stream. (Alarm)
Lack of VoIP channels on node (Alarm)
Board can't be added, because it is not existing in the DB
an interface is deleted but there are still routes using it
a segment is deleted but there are still routes using it
Attempt to unreserve a media slot which is not reserved in any context.
50067 er
50068 er
50069
52001
52002
52003
52004
52005
52006
52007
52008
52009
52010
52011
er
ag
ag
ag
ag
ag
ag
ag
ag
ag
ag
ag
52012 ag
52013
52014
52015
52016
52017
52018
52019
ag
ag
ag
ag
ag
ag
ag
52020 ag
52021 ag
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
54016 mr
54017 mr
54018 mr
54019 mr
54020 mr
54021 mr
54022 mr
54023 mr
Attempt to unreserve a media slot which is reserved in an other context. This
can happen if the AIP resets during a call, and after it a new route is reserved
over the previously used mediaslot, while the old route (related to the call before
the reset) s
No more VoIP licence available.
AIP ETH port has been disconnected from the LAN during an active connection.
Both sides of the route should use the same payload type if they support
telephone events.
Insufficient number of VoIP licences for the new Media Stream
SIP peer selects new codecs, but the selected codecs are not possible! This
shouldn't happen, because we offer only those codes, which are possible and it
shouldn't answer with something completely different.
itfIPParametersChanged() called passing an interface, which is not involved in
the route!
Internal error in MrNwkPBXNodeC::addInterface(), see param 1 for location.
56004 rm
56005 rm
56006 rm
Wrong configuration, not all interfaces of the PBX node access the same BWCA.
The T.38 re-invite has been rejected. P1: value 0 = SIP Subscriber P2: MSN
P1: value 1 = SIP Provider P2: Provider Id
Lack of FoIP resources. P1: Node Id P2: Number of FoIP Channels
Invalid reservation type.
Couldn't retrieve video lines from the media router
Timed out while waiting for response from MR.
The resource administration of a Mindspeed module got corrupted due to a
codec update! param1: portRef, param2: newCodec, param3: oldCodec
Mindspeed resource adm: Unexpected codec type!
Free switch object was called for a DECT that had no entry in the switch object
info list.
A call from or to an IP phone has been switched without using an IP media route.
This call will be cleared. This usually happens when an office suite or OIP
toolbox is trying to use a switched off softphone to make a call. Startup the
softphone and it will
There is something wrong with RM's DECT switch object info list. There are
probably hanging bch-so pairs.
A dect bchannel assign signal has been received by RM. The handset it applies
to has already been defined in RM by a previous signal. Has DP mistakenly
repeated the signal or is there a dect switch object hanger?
A hanging instance of SoInfo has been deleted.
A hanging instance of dect BchInfo has been deleted.
56007 rm
A system base portref for a calling dect handset could not be found. This call
must be rejected. This was an attempted dect to dect call. Parameter 1: Bcsref
of the calling party Parameter 2: DpDectHandsetId of the calling party.
54024 mr
54025
54026
54027
54028
54029
mr
mr
mr
mr
mr
54030 mr
54031 mr
56001 rm
56002 rm
56003 rm
56008 rm
56009 rm
56010 rm
56011 rm
A system base portref for a calling dect handset could not be found. This call
must be rejected. This was an attempted dect to non dect call. Parameter 1:
Bcsref of the calling party Parameter 2: DpDectHandsetId of the calling party.
There was a problem deleting a dect switch object. 1. objId 2. PortRef, 3.
Channel.
No entry was found in the bch-info list during adding handover info. 1. HsId 2.
New portRef 3. New channel.
No entry was found in the bch-info list during do handover. 1. HsId 2. New
portRef 3. New channel.
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
56012 rm
56013 rm
56014 rm
56015 rm
56016 rm
56017 rm
56018 rm
56019 rm
56020 rm
56021 rm
56022 rm
56023 rm
56024 rm
56025 rm
56026 rm
56027 rm
56028 rm
56029 rm
56030 rm
56031 rm
56032 rm
56033 rm
56034 rm
56035 rm
An instance of RmCalDectBchInfo could not be found for removeBchannelInfo
with the given handsetId. 1st parameter is the handsetId.
An attempt has been made to remove an audio player master from an
announcement connection. This means that Vc Csy has a problem. ConnId
ObjId PortRef
An attempt has been made to remove the master from an announcement
connection but no new master was found by asking Xa. ConnId ObjId PortRef
An attempt has been made to remove the master from a connection but no new
master was found by asking Xa. ConnId ObjId PortRef
When moving a tone reservation to ERC SIP, an ERC SIP reservation was
already present. This could be a hanger or collision. Param1: Hangers portref
Param2: Hangers channel
When allocating a reservation to ERC SIP, a reservation was already present.
This is a hanger or collision. Param1: Hanger portref Param2: Hanger channel
Calling new to allocate a new instance of a G.729 object has failed. Param 1:
CallId Param 2: NodeId
An invalid callId was used in the call manager. Param1: The error logs sub
number.
The origin and destination portrefs for a reservation are the same.
getFirstReservation returned a NULL pointer. This means that this call has no
reservations -> this is not allowed.
PSTN Overflow: An empty breakinNum has been received from XA while
attempting a breakout. This call will be cleared.
An incorrect number of SPI channels was reported to the Resource Manager.
Therefore a maximum of 2 voicemail channels has been configured.
Parameter 1: The reported number of SPI channels.
findDtmfJob has been fed with invalid parameters
A share switch object command has been received for a handsetId with no entry
in the switch object info list. 1. Existing bcsRef 2. Share bcsRef
Allocate switch object for a dect failed because there was a hanging switch
object. The hanger will be deleted and a new one allocated.
XA has tried to share a switch object that has a swiobj info but no switch object in
CR, probably because there is no DP info. We'll cleanup and return an error to
XA. Param 1 is the new objId, param 2 is the old objId.
The information in an RBC desassign message does not match that in RM's lists.
RM will be corrected to use the RBC information. There are several variants of
this error report, see the code in rmcaldectmanagerc.cc for the different
parameters.
A deassign has been received from the RBC for a handsetId that is not in the
BchInfo list.
RM was can't find an ethernet port on the given node (node Id is parameter 1).
Not logged in Handset can raise this errorlog. But may be others.
Undef nodeId for getNodeEthernetPortRef. Param 1: NodeId
Context Id could not be allocated. Context Id pool will be reset and all contexts
cleared.
An undef port reference was returned while trying to route a call to a DECT.
Param 1: The nodeId of the DECT Param 2: The handsetId of the DECT
No remaining partner reservation has been found when removing the other
partner from a three party conference. Param 1: MasterBcsRef (callId) Param
2: BcsRef being removed
A get details request to MR for a given sip routeId failed. Param 1: The routeId
involved. Param 2: The request type: 1 (connection) or 2 (tone).
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
56036 rm
56037 rm
56038
58001
58002
58003
58004
58005
58006
58007
58008
58009
58010
58011
58012
58013
58014
58015
58016
58017
58018
58019
rm
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
58020 vc
58021 vc
58022 vc
58023 vc
58024 vc
58025 vc
58026 vc
58027 vc
58028 vc
58029 vc
58030 vc
58031 vc
58032 vc
58033 vc
58034 vc
No robust dtmf receivers for GSM integration are available on the node. Xa
might try to continue the call with a normal dtmf receiver in which case no
extended functionality will be available. Param 1: nodeId where no resources
are available. Param
RM could not find a call with the given connectionId to clear. Param 1:
Connection Id
Muting/Unmuting of intruder failed p1: Intruder CallId p2: Intruded CallId: p3:
mute
Trying to search for an invalid vcBcsRef in the session list.
Unknown timeout type
Unexpected sender for this signal
Unknown Signal Minor for MajorVoice
Not able to find appropriate voice call session for the received command.
Unknown Signal Minor for MajorResource
Undefined service - Can't handle this command.
Unknown timeout signal for this service. Param 1: minor Param 2: service
Can't start session without voice service.
No voice service available to handle requested command.
Vc Record Text Request: No reply from Rm.
Vc Play Text Request: No reply from Rm.
Vc Start Tone Request: No reply from Rm.
Vc Stop Tone Request: No reply from Rm.
Allocation of voice control bcs reference failed.
No voice service to handle signal.
Undefined service - can't access this attribute.
Unknown signal minor for MajorVm
Unknown command response.
One of the parameters passed to VcAllComposeFilename was invalid. The
parameters are given in the error report: Param1 : mboxId (16 bits); textId (16
bits) Param2 : scope Param3 : textType
Trying to copy or assign session manager object!
VcCsyConConnectionC::deallocateSwitchObj got failed from RM. However
Connection is anyway being shut down.
VcCsyConCourtesyC::startConnection: Adding an additional trunk to a courtesy
announcement failed (from RM)
VcCsyConCourtesyC::startConnection: B-Channel allocation failed, but
selectBCh returned a free one.
VcCsyConCourtesyC::startConnection: bcsref allocation failed even if there
should be a few left.
VcCsyConCourtesyC::startConnection: not actually an error but we are running
so low on bcsrefs that we can't start this courtesy announcement. Is there so
much traffic or are there some hanging bcsrefs?
VcCsyConCourtesyC::startConnection: There is no filename in the Database for
this courtesy text.
vcCsyConCourtesyC::startConnection: there is no instance for this courtesy in
the database. So can't really start courtesy in this case.
VcCsyConCourtesyC::removeFromConnection: can't remove it as it isn't part of
this connection.
VcCsyConCourtesyC::startConnection: couldn't start AudioPlayer after all
alloction went well. So free all again and hope the next time it will work better.
VcCsyConToneC::startConnection: start tone to a trunk failed
VcCsyConToneC::startConnection: startConnection, but already connected,
substate not normal
VcCsyConToneC::startConnection: unknnown state
VcCsyConToneC::stopConnection: couldn't stop a tone to a trunk
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58035
58036
58037
58038
58039
58040
vc
vc
vc
vc
vc
vc
58041
58042
58043
58044
58045
58046
58047
58048
58049
58050
58051
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
58052 vc
58053 vc
58054 vc
58055
58056
58057
58058
vc
vc
vc
vc
58059 vc
58060 vc
58061 vc
58062 vc
58063 vc
58064 vc
58065 vc
58066 vc
58067 vc
58068 vc
58069
58070
58071
58072
vc
vc
vc
vc
VcCsyConToneC::removeFromConnection: couldn't stop tone
VcCsyGroupC::add: caller is already in the list
VcCsyGroupC::remove caller is not in the list
VcCsyMgrC::startCourtesy: invalid parameters
VcCsyMgrC::timeoutConMsgTextPlayed: dynamic cast failed
VcCsyMgrC::startConnections: list handling problem
illegal filename for courtesyfile. The filename shouldn't start with 'used.'. This
would cause endless renameing.
Vc Record Text Request: Rm returned an Error.
Vc Play Text Request: Rm returned an error.
Vc Start tone Request: Rm returned an error.
Vc Stop tone Request: Rm returned an error.
This service does not handle any timeout signals.
Didn't find the message with the specified id.
Should not receive "Playing Complete" in this service.
Didn't find the specified greeting.
Couldn't create a new message.
Didn't find the specified mailbox.
The specified mailbox does not exist. Parameters: 1. mailbox-id passed to the
function 2. command (1 for activate and 2 for deactivate) 3. unused
The mailbox is not of the correct type (i.e. integrated) to allow the requested
operation to be performed. Parameters: 1. mailbox-id passed to the function 2.
command (1 for activate and 2 for deactivate) 3. unused
Invalid value of a parameter. Should never happen, as parameters are checked
before this point. Parameters to error: 1. text type 2. scope 3. text id
There is already a voice message playlist assigned to the service. Can't replace
it to avoid memory leak!
No voice command to handle "PlayFurtherMessage" signal.
A playlist for this command already exists.
Couldn't find a previous file name.
Unable to activate the recorded greeting. Parameters: 1. myTextType 2.
myScope 3. myTextId (Also generated in vcfsafilemgrc.cc for exactly the same
reason)
Tried to access a personal mailbox with incorrect types Parameters: 1.
myTextType 2. myScope
Can't find or create a text filename for a personal greeting. Parameters: 1.
mailbox Id 2. TextType 3. TextId
Service is not in the appropriate state. Parameters: 1. current state 2.
expected state
At least one of the parameters the service needs is invalid. Parameters: 1.
mailboxId 2. scope + textType 3. textId
Couldn't delete a file in the file system.
Couldn't compose/find a file name. Parameters: 1. mailbox id and text Id 2.
scope 3. texttype
Problem with the linking of messages in the database! Parameters: 1. mailbox
id 2. message id that couldn't be found
The active element in the playlist does not correspond to the text id being
deleted.
Didn't find an active element to delete in the playlist.
This is not the first message in the mailbox so it should have a previous
message id.
Didn't find a mailbox number for the integrated AVS mailbox.
Can't find the node for a given (personal) mailbox. 1st Parameter: mboxId
This isn't a voicemail message, although it should be!
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58073 vc
58074 vc
58075
58076
58077
58078
58079
vc
vc
vc
vc
vc
58080
58081
58082
58083
58084
58085
58086
58087
vc
vc
vc
vc
vc
vc
vc
vc
58088 vc
58089 vc
58090 vc
58091 vc
58092
58093
58094
58095
58096
vc
vc
vc
vc
vc
58097 vc
58098
58099
58100
58101
58102
vc
vc
vc
vc
vc
58103 vc
58104 vc
58105 vc
58106 vc
Can't read the status of a message. It should be a message and it should be
present. Parameters: 1 textId; 2 mailboxId
Invalid or unknown state.
In recordingAllowed an invalid value was found. Parameters: 1. myMboxId; 2.
myScope; 3. myTextId
Couldn't find an avs mailbox number.
Couldn't find a file name.
Avs command "New Message" - Invalid date/time.
Didn't find the specified greeting.
Greeting recording time exceeded limit. Set greeting duration to configured max.
Param1: mboxId/greetNr Param2: duration (value [s] which exceeded the limit)
Param3: maxLen (configured max value [s]}
Didn't find the specified message.
Error in recording time calculation.
unknown enum value used
FileSystemManager error Rename,Delete or getDir failed
File not found in FileList
Command Id Pool ru out of Ids. Is there somewhere a leak?
Invalid state.
Received "MessageListened" from AVS and finding/creating the appropriate AVS
message object in Vc failed. AVS voice mail may now contain more messages
than we are aware of!
Received "NewMessage" from AVS and finding/creating the appropriate AVS
message object in Vc failed. AVS voice mail may now contain more messages
than we are aware of!
There was a problem in appending the message to the mailbox. There may be
more messages in the file system/AVS voice mail module than Vc is aware of!
No previous message id found! This is not the first message in the mailbox so it
should have a previous message id.
Should not receive this signal here! Can not handle delete confirmation wait
timeout.
No delete confirmation from file system/avs module.
No delete confirmation from file system/avs module.
Text id in service differs from text id received by 'message deleted' signal.
something went wrong while creating DB instance for new AIN node.
Unexpected / unknown signal or parameter in the signal. Parameters: 1. minor
(major is always MajorFm) 2. unexpected parameter (or 0 if the whole signal is
unexpected/unknown)
Can't send the requested signal. Parameters: 1. minor of the signal that could
not be sent (major is always MajorFm) 2. some other information - look at code!
Should not have session without service or command.
Can not handle delete confirmation signal.
Can't convert greeting number into audio record.
FmDeleteReply or AvsMessageDeleted received in wrong command
Can't find filename to play a global greeting or courtesy. Was found earlier (in
cmi). Parameters: 1. node id 2. text type 3. greeting number
Can't find the filename when stopping playing a global greeting or courtesy text.
Parameters: 1. node id 2. text type 3. greeting number
Global greeting is in an unexpected state. Parameters: 1. node id 2. text type
(upper 16 bits) and greeting number 3. state (as received from courtesy file
manager)
Can't find a greeting to play or greeting is currently being recorded. Parameters:
1. mailbox id and node id 2. scope and greeting number 3. 0 for now [should be
file state (as returned from courtesy file manager)]
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58107 vc
58108 vc
58109 vc
58110 vc
58111 vc
58112
58113
58114
58115
58116
58117
vc
vc
vc
vc
vc
vc
58118 vc
58119 vc
58120 vc
58121 vc
58122 vc
58123 vc
58124 vc
58125 vc
58126 vc
58127 vc
58128 vc
58129 vc
58130 vc
58131 vc
58132 vc
58133 vc
58134 vc
Unallowed action in vm directory. Parameters: 1. operation (from
FmNotificationEnu) 2. nodeId (first 8 bits) 2. (24 bits) and 3. first 7 characters of
file name (without directory)
Notification from filesystem manager. Filename looks like mailbox and text, but
isn't. Parameters: 1. node id 2. text type 3. mailbox and text ids
In checkGlobalPermission: unexpected response from ACM. Parameters: 1.
subscriber id 2. return value
Didn't find the specified mailbox - not able to delete.
Deleting files of a removed mailbox failed.
Couldn't find nodeId for this mailbox or subscriber. Parameters: 1. subscriber id
2. scope (personal or global) 3. mailbox id or 0 if scope is global
No response from AVS to "stop playing" command.
Did not expect this signal in this service.
No connectionId found (may be a collision) (br31021)
Trying to copy or assign node manager object - not allowed! (and won't work)
Didn't find node in our list. Parameters: 1. nodeId
This type of subscription is not supported. Parameters: 1. The requested type
(from arsigfm/FmSubscriptionEnu) 2. The value, if we are trying to write it (else
0)
Can't add new node to list. Parameters: 1. nodeId
No instance pointer for the FsaNodeMgr. This is serious as it means, for some
reason, we haven't started the Master node correctly! Currently no parameters.
Message too short - deletion of file in FS failed!
Invalid or unknown return value for
VcEclAvsMailBoxC::checkAppendAvsMessage(). Param 1: appendResult
Param 2: mboxId Param 3: avsMsgId
Invalid message id.
Trying to link message to itself creating a circular reference! Param1: mboxId
Param2: avsMsgId
Trying to link message to itself creating a circular reference!
Trying to link message to itself creating a circular reference!
Corrupted mailbox - The message which is stored as first message in the
mailbox does not exist. Param1: mboxId Param2: msgId (of message which
does not exist)
No messages in mailbox - Set first message id to 'Undef'. Param1: mboxId
Param2: msgId (of the first message in the mailbox which does not exist and
therefore was set to undef)
Found first message of mailbox - Replaced first message Id of mailbox.
Param1: mboxId Param2: msgId (of message which does not exist) Param3:
newMsgId (which replaced msgId)
Didn't find first message of mailbox - Set first message Id to 'Undef'. Attention
there may be messages in this mailbox which are no longer referenced now!!!
Param1: mboxId Param2: msgId (of message which does not exist)
Message recording time exceeded limit. Set message duration to configured
max. Param1: mboxId/msgId Param2: duration (value [s] which exceeded the
limit) Param3: maxLen (configured max value [s])
Deleted message with undefined length. Param1: mboxId Param2: msgId (of
deleted message)
Deleted greeting with undefined length. Param1: mboxId Param2: greetNr
(of deleted greeting) Param3 audioRecId (of deleted greeting)
Trying to set status for invalid avs greeting. Param1: mboxId Param2: greetNr
Param3: status
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58135 vc
58136 vc
58137 vc
58138 vc
58139 vc
58140 vc
58141 vc
58142 vc
58143 vc
58144 vc
58145 vc
58146 vc
58147 vc
58148 vc
58149 vc
58150 vc
58151 vc
58152 vc
58153 vc
58154 vc
58155 vc
58156 vc
58157 vc
58158 vc
58159 vc
Trying to get status of invalid AVS greeting. Param1: mboxId Param2:
greetingNr
AVS mailbox - Circular reference in linked list of messages. Param 1: mboxId
Param 2: msgId of the msg object causing the circular reference Param 3:
msgId pointed to by the msg object causing the circular reference
Embedded mailbox - Circular reference in linked list of messages. Param 1:
mboxId Param 2: msgId of the msg object causing the circular reference Param
3: msgId pointed to by the msg object causing the circular reference
More than 100 messages in mailbox!? Might be a circular reference in the
message queue. Param 1: mboxId
Not able to re-link the message objects in the mailbox. Object still in db although
file might be deleted. Param 1: mboxId Param 2: avsMsgId
Not able to re-link the message objects in the mailbox. Object still in db although
file might be deleted. Param1: mboxId Param2: msgId
Trying to delete a message which does not belong to this mailbox. Param 1:
mboxId Param 2: avsMsgId
Trying to delete a message which does not belong to this mailbox. Param 1:
mboxId Param 2: msgId
Can't create one of the voice directories
Deleting file failed. Param1: mboxId Param2: textId Param3: fsErrorNo
Embedded mailbox - No previous messge to link to. Param1: mboxId Param2:
msg id of the previous message which is not available Param3: msg id of the
next message which should be linked to the previous message.
AVS mailbox - No previous message to link to. Param1: mboxId Param2: id of
previous message which is not available. Param3: id of next message which
should be linked to the previous on which is not available
Embedded mailbox - Integrity check failed (excessive loops in check routine)!
There must be a circular reference in the list of linked messages.
AVS mailbox - Integrity check failed (excessive loops in check routine)! There
must be a circular reference in the list of linked messages.
Auto Attendant: Didn't find the active global greeting. Param1: nodeId Param2:
mboxId Param3: state of voicemail service
Auto Attendant: Didn't find the active personal greeting. Param1: mboxId
Param2: greetingNr Param3: state of voicemail service
Auto Attendant: Not able to find the active greeting. Param1: mboxId Param2:
greetingNr Param3: scope of greeting
Auto Attendant: Unknown action Param1: mboxId Param2: greetingNr
Param3: trigger
Auto Attendant: Not able to find recall time - use default. Param1: nodeId
Param2: mboxId Param3: state of voice service
Voice mail service: Timer was cancelled because a new timer was started!
Param1: minor of cancelled vc timer signal Param2: minor of new started vc
timer signal
No auto attendant available in state "AutoAttendantWaitResponse". Param1:
mboxId Param2: greetingNr Param3: scope
No auto attendant action defined or unknown action - Should have ignored the
trigger.
Should not receive "connect" after "transfer to destination". Param 1: mboxId
Param 2: greetNr
Service VoiceMail, AutoAttendant, execute "busy" action: Unknown return state.
Param 1: mboxId Param 2: greetingNr Param 3: return state
Service VoiceMail, AutoAttendant, CallRejected: Should not get here without auto
attendant. Param 1: mboxId Param 2: greetingNr
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58160 vc
58161 vc
58162 vc
58163 vc
58164 vc
58165 vc
58166 vc
58167 vc
58168 vc
58169 vc
58170 vc
58171 vc
58172 vc
58173 vc
58174 vc
58175 vc
58176 vc
58177 vc
58178 vc
58179 vc
58180 vc
58181 vc
58182 vc
58183 vc
58184 vc
58185 vc
58186 vc
Service VoiceMail, AutoAttendant, execute "end of greeting" action: Unknown
return state! Param 1: mboxId Param 2: greetingNr Param 3: return state
Service VoiceMail, AutoAttendant, execute "no reply" action: Unknown return
state! Param1: mboxId Param2: greetingNr Param3: return state
Service VoiceMail, AutoAttendant, VoiceNoReplyTimeout: Should not get here
without auto attendant! Param1: mboxId Param2: greetingNr
Auto Attendant: Should not get "noReply" trigger if no profile available. Param1:
mboxId Param2: greetingNr
Auto Attendant: Should not get "busy" trigger if no profile available. Param1:
mboxId Param2: greetingNr
Auto Attendant: Check destination string - unknown return value! Param1:
mboxId Param2: greetingNr Param3: trigger
No auto attendant available to handle user selection.
Service VoiceMail, AutoAttendant, callRejected: Should not get this signal
without auto attendant action for the given reject cause. Param 1: mboxId
Param 2: greetingNr Param 3: reject cause
Auto Attendant: Should not receive "connect" after "execute function".
Parameter 1: mboxId Parameter 2: greetingNr
No valid "calling bcs ref" for this session.
Service Voicemail: Wrong state for updating partner parameters of SVM mailbox
(call transfer). Param 1: state Param 2: mailboxId Param 3: vcBcsRef
Service Voicemail: Undefined or unknown state while updating partner
parameters of a SVM mailbox (call transfer). Param 1: state Param 2:
mailboxId Param 3: vcBcsRef
Service Voicemail - Call transfer: Should not allocate new buffer for partner
parameters before od buffer is released. Param 1: mailboxId
Invalid voice mail service state to handle VoiceRmReqRetryTimeout. Param 1:
state
Invalid playback service state to handle VoiceRmReqRetryTimeout. Param 1:
state
Invalid play voice mail service state to handle VoiceRmReqRetryTimeout.
Param 1: state
Service Voicemail: Not possible to update partner params (call transfer) in this
state. Param1: state Param2: mboxId Param3: vcBcsRef
Service Voicemail: Invalid state for updating partner parameters of AVS mailbox
(call transfer). Param1: state Param2: mboxId Param3: vcBcsRef
Service VoiceMail/AutoAttendant - wrong state after playing greeting. Param1:
mailbox id Param2: greeting nr Param3: state
Service VoiceMail/AutoAttendant: Should not get here without auto attendant.
Param1: mailbox id Param2: greeting nr
Service VoiceMail/AutoAttendantDelay: No auto attendant action available.
Param1: mailbox id Param2: greeting nr
Unexpected subscription id. Param 1: subscription id
Renaming uploaded message failed. Param1: nodeId Param2: mboxId
Param3: original messageId
Could not append the renamed message to requested mailbox. Param1:
mboxId Param2: messageId
Triyng to link message to itself creating circular reference. Param1: mboxId
Param2: textId
Message was renamed incorrectly. Param1: mboxId Param2: oldTextId
Param2: newTextId
Invalid Courtesy Group Param 1: Courtesy group id
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58202 vc
No valid node to check node state for. Param 1: nodeId Param 2: command
type to check node for
Didn't find the specified mailbox database object. Param 1: mboxId
Triyng to link message to itself creating circular reference. Param1: mboxId
Param2: textId
Could not append message to this mailbox. Param1: mboxId Param2:
messageId
Service can not handle "Playing Complete" signal.
Vc Start Tone Request: No reply from Rm.
Vc Record Text Request: No reply from Rm.
Vc Record Text Request: Rm returned an Error.
Vc Record Text Request: Unknown reply from Rm.
Vc Play Text Request: Rm returned an error.
Vc Play Text Request: No reply from Rm.
Vc Play Text Request: Unknown reply from Rm.
Vc Start tone Request: Rm returned an error.
Vc Stop tone Request: Rm returned an error.
Vc Stop Tone Request: No reply from Rm.
Should not receive timeout signal in this service. Param 1:
(VoiceMinorEnu)minor
58203 vc
Wrong state to handle signal.
58204 vc
Wrong state to handle signal. Param 1: actual state Param 2: expected state
Wrong playback service state to handle VoiceRmReqRetryTimeout. Param 1:
actual state Param 2: expected state
Unknown timeout signal for this service. Param 1: (VoiceMinorEnu)minor
Couldn't compose/find a file name. Parameters: 1. mailbox id and text Id 2.
scope 3. texttype
Global greeting is in an unexpected state. Param 1: node id Param 2: text type
(upper 16 bits) and greeting number Param 3: state (as received from courtesy
file manager)
Can't find filename to play a global greeting or courtesy. Was found earlier (in
cmi). Parameters: 1. node id 2. text type 3. greeting number
Could not create playback service (this should never happen)! Allocated bcsRef
might never be deallocated! Param 1: allocated bcsRef
Should not receive timeout signal in this service. Param 1: minor
(VoiceMinorEnu) of the received signal
Wrong state to handle signal. Param 1: signal to handle Param 2: type (AVS
or SVM) and state Param 3: expected state
Should call handler of derived class. Param 1: signal to handle Param 2: type
(AVS or SVM) and state Param 3: minor (VoiceMinorEnu) (if available)
Could not create "Play Voicemail" service! Param 1: vcBcsRef
Could not create "Record" service. Param 1: vcBcsRef
Could not create "Voicemail" service. Param 1: vcBcsRef
Greeting recording time exceeded limit. Set greeting duration to configured max.
Param1: mboxId/greetNr Param2: duration (value [s] which exceeded the limit)
Param3: maxLen (configured max value [s])
Didn't find the specified greeting. Param 1: gretingNr Param 2: mboxId
Didn't find the specified mailbox. Param 1: mboxId
Should not recieve timeout signal in this service. Param 1:
(VoiceMinorEnu)minor
Wrong state to handle signal. Param 1: received signal Param 2: Vm type
(AVS or SVM) and state Param 3: expected state (if available)
Should call handler of derived class. Param 1: signal to handle Param 2: type
(AVS or SVM) and state Param 3: (VoiceMinorEnu)minor (if available)
58187 vc
58188 vc
58189 vc
58190
58191
58192
58193
58194
58195
58196
58197
58198
58199
58200
58201
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
vc
58205 vc
58206 vc
58207 vc
58208 vc
58209 vc
58210 vc
58211 vc
58212 vc
58213
58214
58215
58216
vc
vc
vc
vc
58217 vc
58218 vc
58219 vc
58220 vc
58221 vc
58222 vc
Param 1: actual state Param 2: expected state
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58223 vc
58224 vc
58225 vc
58226 vc
58227 vc
58228 vc
58229 vc
58230 vc
58231 vc
58232 vc
58233 vc
58234 vc
58235 vc
58236 vc
58237 vc
58238 vc
58239
58240
58241
58242
vc
vc
vc
vc
58243 vc
58244 vc
58245 vc
58246 vc
58247 vc
58248 vc
58249 vc
58250 vc
58251 vc
58252 vc
Could not create "Play Voicemail" service.
mboxId
Param 1: vcBcsRef Param 2:
Invalid scope! Param 1: mboxId Param 2: scope and textType Param 3: textId
Wrong state to handle signal. Param 1: signal to handle Param 2: type (AVS
or SVM) and state
Unknown timer signal for this state. Param 1: (VoiceMinorEnu)minor Param 2:
type (AVS or SVM) and state
Not a personal greeting! Param 1: textType Param 2: scope
Invalid scope! Param 1: mboxId Param 2: scope and textType Param 3: textId
Should not call method of base class! Override the method in the appropriate
derived class.
The active element from the playlist does not correspond to the text id being
deleted.
Didn't find an active element to delete in the playlist.
Should not call this method for non-AVS service!
Could not get message status (no valid message). Param 1: textId Param 2:
mboxId
Unknown state - state set to idle. Param 1: unknown state
(VcSrvServicePlayVoicemailC::State)
No response from AVS to "stop playing" command. Param 1: mboxId Param
2: textId
Should call handler of derived class. Param 1: signal to handle Param 2:
vmType and state
Unknown state - state set to idle.
Could not get message status (no valid message). Param 1: textId Param 2:
mboxId
Invalid state to handle signal. Param 1: (VoiceMinorEnu) minor Param 2:
vmType and state Param 3: expected state
Could not find a file name. Param 1: textId Param 2: mboxId
Can't use this method whith services other than SVM! Param 1: mboxId
Need to have an integrated mailbox for SVM services! Param 1: mboxId
Should never get this signal for voice mail services other than SVM. Param 1:
VcSrvServiceVoicemailC::Signal(signal)
Signal is not handled in this state. Param 1: (VoiceMinorEnu)minor Param 2:
state
Unknown timeout signal for AVS voice mail service. Param 1:
VoiceMinorEnu(minor)
Wrong state to handle signal. Param 1:
VcSrvServiceVoicemailC::Signal(signal) Param 2: Service type (AVS or SVM)
and VcSrvServiceVoicemailC::State(state) Param 3: Expected
VcSrvServiceVoicemailC::State(state) (if available).
Should not call handler of base class. Param 1:
VcSrvServiceVoicemailC::Signal(signal) Param 2: Service type (AVS or SVM)
and VcSrvServiceVoicemailC::State(state)
Unknown signal for play voicemail service. Param 1: VoiceMinorEnu(minor)
Wrong state to handle signal. Param 1: mbox id + vcBcsRef Param 2:
VoiceMinorEnu(signal) Param 3: VcSrvServiceVoicemailC::State(state)
Can't use this method with services other than AVS. Param 1: vcBcsRef
Param 2: mbox id
Should not receive "Connect" after "transfer to destination"! Param1: vcBcsRef
Param2: mboxId Param3: greetingNr
Should not receive "Connect" after "Execute function"! Param1: vcBcsRef
Param2: mboxId Param3: greetingNr
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58253 vc
58254 vc
58255 vc
58256 vc
58257 vc
58258 vc
58259 vc
58260 vc
58261 vc
58262 vc
58263 vc
58264 vc
58265 vc
58266 vc
58267 vc
58268 vc
58269 vc
58270 vc
58271 vc
58272 vc
58273 vc
58274 vc
58275 vc
58276 vc
58277 vc
58278 vc
58279 vc
No auto attendant action defined or unknown action - Should have ignored the
trigger. Param1: vcBcsRef Param2: mboxId Param3: greetingNr
Auto Attendant - Invalid or unknown state. Param1: vcBcsRef Param2: mboxId
Param3: greetingNr
AutoAttendant - Should not get "CallRejected" signal without auto attendant
action for the given reject cause. Param 1: vcBcsRef Param 2: mboxId,
greetingNr Param 3: reject cause
Execute "no reply" action: Unknown return state. Param 1: vcBcsRef Param 2:
mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state)
Execute "busy" action: Unknown return state. Param 1: vcBcsRef Param 2:
mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state)
Should not get "CallRejected" signal without auto attendant. Param1: vcBcsRef
Param2: mboxId, greetingNr Param3: reject cause
Execute "End of Greeting" action: Unknown return state. Param 1: vcBcsRef
Param 2: mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state)
Unknown Timeout Signal. Param 1: vcBcsRef Param 2: mboxId, greetingNr
Param 3: VoiceMinorEnu(minor)
Message too short - deletion of file in filesystem failed. Param1: vcBcsRef
Param2: mboxId Param3: textId
In recordingAllowed an invalid value was found. Parameters: 1. mboxId; 2.
scope; 3. greetingNr
Call transfer: Should not allocate new buffer for partner parameters before old
buffer is released. Param 1: callingBcsRef Param 2: mailboxId
No delete confirmation from filesystem. Param1: vcBcsRef Param2: mboxId
Param3: textId
Wrong state to handle "Connect" signal. Param1: vcBcsRef Param2: mboxId,
greetingNr Param3: state
Wrong state to handle "PlayingComplete" signal. Param1: vcBcsRef Param2:
mboxId, greetingNr Param3: state
Invalid state to handle "Timeout" signal. Param1: vcBcsRef Param2: mboxId
Param3: state, VoiceMinorEnu(minor)
Invalid state to handle "UpdatePartner" signal. Param1: vcBcsRef,
callingBcsRef Param2: mboxId Param3: state
Method used with invalid service (dynamic cast failed). Param1: vcBcsRef
Param2: mboxId Param3: state
Could not create "PlayVoicemail" service. Param1: vcBcsRef Param2: mboxId
No auto attendant action available. Param1: vcBcxRef Param2: mboxId
Param2: greetingNr
Couldn't create new message. Param1: vcBcsRef Param2: mboxId
Finished playing an unknown system prompt. Param1: mboxId Param2:
SysPromptEnu(systemPrompt)
Couldn't read the state of "file system locked" flag in the database when Master
starts up. No parameters.
More than 1000 messages in mailbox!? Might be a circular reference in the
message queue. Param 1: mboxId
More than 1000 messages in mailbox!? Might be a circular reference in the
message queue. Param 1: mboxId
Problem with the linking of messages in the database! Parameters: 1. mailbox
id 2. message id that couldn't be found
Activate/deactivate greeting: The specified mailbox does not exist. Parameters:
1. mailbox-id passed to the function 2. greetNr 3. 1 for activate and 0 for
deactivate
This isn't a voicemail message, although it should be! Param1: mboxId
Param2: msgId Param3: nodeId
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58305 vc
Didn't find the message with the specified id. Param1: mboxId Param2: msgId
Can't convert greeting number to audio record id. Param1: mboxId Param2:
greetNr
Message recording time exceeded limit. Set message duration to configured
max. Param1: mboxId/msgId Param2: duration (value [s] which exceeded the
limit) Param3: maxLen (configured max value [s])
Mailbox does not exist. Param1: mboxId
Couldn't find an avs mailbox number. Param1: mboxId Param3: identifies error
location in file
This is not the first message in the mailbox so it should have a previous
message id. Param1: mboxId Param2: avsMsgId
This instance of the VcAllMainC process is running on a satellite and does not
expect to receive this signal. Param1: nodeId Param2: Major/Minor
Received unexpected FmNotification. Param1: FmNotificationEnu Param2:
nodeId (where the notification came from) Param3: last four characters of the
file name
Audio Guide: No valid system prompt to play back. Param 1: mboxId
Should not call playText method of base class.
Audio Guide: svmmode.txt file has been modified by an external process!
Audio Guide: svmmode.txt file has been removed by an external process!
Audio Guide: svmmode.txt file has been renamed by an external process!
Error happened while copying the wave file, so the file might be corrupt.
Param1: how many blocks have been read successfully already. Param2: how
many bytes have been written of the last block Param3: how many bytes have
been read of the last block
Invalid greeting number. Param 1: mboxId Param 2: greetingNr
Invalid Greeting Nr. Param 1: mboxId Param 2: greetNr
Invalid Number of Greetings! Param 1: mboxId Param 2: oldNbrOfGreetings
Param 3: newNbrOfGreetings
Received an update signal for an integrated mailbox that does not exist! Param
1: mboxId Param 2: minor (of MajorVoice)
Received unexpected file manager subscribe response. Param1: nodeId
Param2: subscription type Param3: subscription id
Send MWI E-Mail is activated for a mailbox but no destination e-mail address
configured for the mailbox owner. Param1: userId (mailbox owner) Param2:
mboxId
Could not find mailbox owner! Param1: mboxId
PBX in expanded voice mail mode (G729 only). Cannot attach files to VM MWI email. Param1: mboxId
VcAllBackupRestoreHandlerC - Unknown Request/Action Param 1: action
(VoiceAudioEncryptionAction)
Creating audio record for an uploaded personal greeting failed. Param1:
nodeId Param2, Param3: first 8 characters of filename (excluding path)
Creating audio record for an uploaded voice mail message failed. Param1:
nodeId Param2, Param3: first 8 characters of filename (excluding path)
An unknown file was created in the voicemail directory and has been deleted by
the PBX. Param1: nodeId Param2, Param3: first 8 characters of filename
(excluding path)
58306 vc
A renamed message could not be appended to a mailbox and was deleted.
Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path)
58307 vc
A message has been deleted because it was renamed incorrectly. Param1:
nodeId Param2, Param3: first 8 characters of filename (excluding path)
58280 vc
58281 vc
58282 vc
58283 vc
58284 vc
58285 vc
58286 vc
58287
58288
58289
58290
58291
58292
vc
vc
vc
vc
vc
vc
58293 vc
58294 vc
58295 vc
58296 vc
58297 vc
58298 vc
58299 vc
58300 vc
58301 vc
58302 vc
58303 vc
58304 vc
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
58309 vc
A message has been deleted because it was renamed by an external process.
Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path)
A file in the voicemail directory has been deleted because it was renamed by an
external process. Param1: nodeId Param2, Param3: first 8 characters of
filename (excluding path)
58310 vc
An invalid message was uploaded to the PBX and has been deleted.
Param1:
nodeId Param2, Param3: first 8 characters of filename (excluding path)
58308 vc
58311 vc
58312 vc
58313 vc
58314 vc
58315 vc
58316 vc
58317 vc
58318 vc
58319 vc
58320 vc
58321 vc
58322 vc
58323 vc
58324 vc
58325 vc
58326
60001
60002
60003
60004
60005
60006
60007
60008
60009
60010
60011
60012
60013
vc
np
np
np
np
np
np
np
np
np
np
np
np
np
An invalid personal greeting was uploaded to the PBX and has been deleted.
Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path)
Method handleBackupRequest() called in wrong state. Param 1: actual state
(VcAllBackupRestoreHandlerC::StateEnu) Param 2: expected state
(VcAllBackupRestoreHandlerC::StateEnu)
Deleting the backup zip file failed. File will remain in PBX file system!
Deleting the Assignment Table File failed! File will remain in PBX file system!
Method handleFileUploaded() called in wrong state. Param 1: actual state
(VcAllBackupRestoreHandlerC::StateEnu) Param 2: expected state
(VcAllBackupRestoreHandlerC::StateEnu)
Unzipping the voice mail audio files form the backup zip file failed!
Vm audio file restore procedure: Deleting the assignment table file failed! The file
will remain in the PBX file system!
Vm audio file restore procedure: Unzipping the backup info file (including the
assignment table) failed!
In method handleFileUploaded(): Deleting the backup zip file failed. File will
remain in PBX file system!
ZIP file name in class variable "myZipFile" is empty - so it is not possible to
delete the temporarily stored ZIP file.
Creating the assignment table form the assignment table file in the backup zip
file failed!
Could not create voice directory! Param1: fs errno Param2: identifier
Backup audio file couldn't be done. Parameter 0:
VcAllBackupRestoreHandlerC::ResponseEnu 0 = Undef, 1 = Reset Ok, 2 =
Could not create the assignment table file 3 = Could not zip the backup info and
the audio files together 4 = The zip file is r
Could not create directory. Param 1: errno (from file system)
VM message created in FS but could not send VM-MWI e-mail because
mboxId, subsId (of mailbox owner) or msgId did not match. Param 1: mboxId
Param 2: subsId (mbox owner) Param 3: msgId
Didn't receive FS notification of VM message to attach to MWI e-mail! Param1:
mboxId Param2: msgId
No valid directory entry for subtype operator
Direct entry for subtype not valid (operator)
No valid directory entry for subtype Emergency
Directory entry for subtype not valid (Emergency)
No valid directory entry for subtype CostCentre
Directory entry for subtype not valid (CostCentre)
No valid directory entry for subtype StarReplacement
Directory entry for subtype not valid (StarReplacement)
No valid directory entry for subtype ExternalAccess
Directory entry for subtype not valid (ExternalAccess)
No valid directory entry for subtype LocalNode
Directory entry for subtype not valid (LocalNode)
No valid directory entry for subtype NetworkSubscriber
TI 1053
18.01.2011
List of Error-ID's out of Aastra Intelligate
60014
60015
60016
60017
60018
60019
60020
60021
60022
60023
60024
60025
60026
60027
60028
60029
np
np
np
np
np
np
np
np
np
np
np
np
np
np
np
np
60030 np
60031 np
60032 np
60033 np
60034 np
60035 np
60036 np
60037 np
60038 np
60039 np
60040
60041
60042
62001
np
np
np
us
62002 us
62003 us
62004 us
62005 us
62006 us
62007 us
62008 us
62009 us
62010 us
62011 us
No valid directory entry for subtype UserGroup
No valid directory entry for subtype UserGroup
Directory entry for subtype not valid (UserGroup)
No valid directory entry for subtype Abbreviated
Directory entry for subtype not valid (Abbreviated)
No valid directory entry for subtype Door
Directory entry for subtype not valid (Door)
No valid directory entry for subtype HDLCTerminalAdaptor
Directory entry for subtype not valid (HDLCTerminalAdaptor)
No valid directory entry for subtype Subsrciber
Directory entry for subtype not valid (Subscriber)
No valid directory entry for subtype CallDistribution
Directory entry for subtype not valid (CallDistribution)
No valid directory entry for subtype route
Directory entry for subtype not valid (route)
Too complex
A value of NpNumAnalEnuC could not be mapped to NpNumElemEnu. The
maximum value will be returned instead.
A cast operator is out of date, its name is given in the parameters.
See br21379: for some reason someone succeeded when trying to change a
number through the numberingplan, please report this error.
Operator >= has been called. Function implemented (not tested yet)
Someone tried to insert two directory entries with the same number in function
xaNumIdxInsert. Reference is br27386.
No valid directory entry for subtype VoiceMail
Directory entry for subtype not valid (VoiceMail)
Function xaNumGetVoiceMailNum is called but no VoiceMail number is
configured.
During numberingplan population at NP startup two directory entries with the
same number are present (this should never happen) the responsible directory
entry has been destroyed !!!
We have found a route instance in NP without a corresponding directory entry
instance. The first parameter is the NpRouteIdC value.
loop run to the end in function NpNumDirePropertiesC::getDirEntryId without
result used to detect sources of inefficencies
No valid directory entry for subtype AMCC
Directory entry for subtype not valid (AMCC)
Unknown Signal - MajorUs, minor unknown. Param1: minor
Trying to update voice mail status but no voice mail status object available.
Param1: userId
Trying to assign voice mail status object to user who already has one. Param1:
userId
Trying to activate voice mail mwi on a user who does not exist. Param1: userId
Trying to deactivate voice mail mwi on a user who does not exist. Param1:
userId
Trying to set voice mail mwi status on a user who does not exist. Param1:
userId
Trying to get voice mail mwi status from a user who does not exist. Param1:
userId
Trying to get user who does not exist in Us. Param 1: userId
Conversion from sRef to userId failed! Param 1: user number Param 2: sRef
Conversion from sRef to ugId failed! Param 1: user number Param 2: sRef
Must not call UsAllSynchFacadeC on satellite! Pram1: id to locate call of this
error report
TI 1053
18.01.2011