Design House 519728 Instructions / Assembly

ASSEMBLY AND INSTALLATION (CONT.)
AJAX 3LT VANITY LIGHT
ASSEMBLY/INSTALLATION INSTRUCTIONS
Item # 519728 (AJAX 3LT VANITY LIGHT GAL)
Item # 519736 (AJAX 3LT VANITY LIGHT BRZ)
GROUND SCREW
C
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualified electrician to ensure correct
installation.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible
shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
FIXTURE SCREWS
JUNCTION BOX
JUNCTION BOX SCREW
CROSS BAR
SCREW HOLES
BALL NUTS
FIXTURE
WIRE NUTS
B
A
LAMP HOLDER
IRON RACKS
Remove the fixture and the mounting package from the box and make sure that no parts are missing by
referencing the illustrations on the installation instructions.
TOOLS REQUIRED
Phillips screwdriver.
ASSEMBLY AND INSTALLATION
SOCKET RINGS
Turn off the power at fuse or circuit breaker.
1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS and
the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) JUNCTION BOX
SCREWS.
2. Make wire connections with WIRE NUTS:
A - Connect the black wire from Fixture to the black supply wire.
B- Connect the white wire from Fixture to the white supply wire.
C- Attach the fixture ground wire to the CROSS BAR with the green GROUND SCREW. Then connect
it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION BOX.
3. Attach the FIXTURE to the CROSS BAR through SCREW HOLES as shown, and secure it with
BALL NUTS.
4. Attach the IRON RACKS to the LAMP HOLDERS and secure them with SOCKET RINGS.
5. Install BULBS (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
6. Attach the IRON RACKS (01) to the IRON RACKS as shown, and secure it with DECORATIVE
NUTS.
Turn on the power at fuse or circuit breaker.
BULBS (not included)
IRON RACK (01)
DECORATIVE NUTS
#519728
#519736
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
Customer Service 1-800-558-8700