Kenroy Home 32490CH Assembly Instructions

 MODEL: 32490
PACKING DIAGRAM
| SHADE
CARDBOARD
.CA TITLE 20
INNER BOX
FOR SHADE
+ FINIAL, HARP &
\
LAMP BODY Q
STYROFOAM: 12 KGS: =
CT
Pee CARDBOARD
J RUBBER WASHER
ASSEMBLY INSTRUCTIONS
||- FINIAL READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
= НЕХ ASSEMBLY.
THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, RUBBER WASHER, SHADE, HARP AND LAMP
BODY. TO PROTECT THE FINISH, PLACE ALL PARTS ON A SOFT
| SURFACE.
ASSEMBLE THE LAMP
f \ 1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH,
FLAT SURFACE. LINE UP ALL OF THE PARTS ACCORDING TO THE
SHADE ASSEMBLY DIAGRAM.
—32490SHCH
(REPLACEMENT 2. SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE
PART) TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER.
HARP 3. PLACE SHADE ONTO HARP, AND THEN SECURE WITH RUBBER
WHARP—8—CH WASHER AND FINIAL.
(REPLACEMENT
PART) 4. INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE "A" 3—WAY
BULB (NOT INCLUDED) INTO SOCKET.
5. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT
SWITCH.
I SOCKET
SWITCH BULB REPLACEMENT
ARP HOLDER 1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A
NEW BULB. PLUG POWER SUPPLY CORD BACK INTO OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
LAMP
BODY
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF
POWER NECESSARY, PLUG IN LAMP AND TURN IT ON.
CORD
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT YOUR
DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK
OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN
THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT,
CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN
AVAILABLE PARTS ARE: EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED. DO
32490SHCH (SHADE) NOT ALTER THE PLUG.
LWHARP—8—-CH (HARP)
05/2014 32490CH INSTRUCTIONS