the great outdoors by Minka Lavery 73066-246 Instructions / Assembly

INSTALLATION INSTRUCTION
For Model 73066-246 (Rev. 02/20/2014)
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARING FOR INSTALLATION (Fig. 1)
1. Shut off the power at the fuse box or circuit
breaker. If necessary, remove the old fixture,
including the mounting hardware.
2. Carefully unpack your new fixture and lay out all
parts on a clear area. Take care not to lose any
small parts necessary for installation.
Fig. 1
A
B
C
CONNECTING THE WIRES (Fig. 2)
3. Pull the black, white and ground wires out of the
post.
4. While carefully supporting the fixture, connect the
electrical wires as shown in Fig. 2. If your outlet
has a ground wire (green or bare copper), connect
the fixture’s ground wire to it. If not, consult your
electrician for proper grounding. After wires are
connected, tuck them carefully inside the post (Fig
1 & 2).
COMPLETING THE INSTALLATION (Fig. 1)
5. Align the lantern with the post and secure with
screws (F).
6. Install 1*40W ST58 bulb (included) in accordance
with the fixture’s specifications. (DO NOT
EXCEED THE MAXIMUM WATTAGE RATING!)
(NE
PAS
DEPASSER
LA PUISSANCE
NOMINALE MAXIMALE!).
7. Align glass shade (D) onto socket assembly (E).
8. Align cover (B) onto the top of glass shade (D).
9. Secure brackets (C) to top cover (B) and socket
assembly (E), with ball nuts (A).
D
E
A
F
Fig. 2
FIXTURE
WIRES
Black or
Smooth
Your installation is now complete. Return the power
to the outlet box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2395E
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green
(Ground)