the great outdoors by Minka Lavery 8106-A138 Installation Guide

INSTALLATION INSTRUCTIONS
For Outdoor Lantern (Rev. 05/06/2011)
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
Fig. 1
1. Shut off power at the circuit breaker and remove the old
fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
3. Pull the black, white and ground wires out of Post (C).
4. Next, connect electrical wires while supporting the
A
lantern as shown in (Fig.2). If your outlet has a ground
B
wire (green or bare copper), connect the fixture ground
wire to it. If not, consult your electrician for proper
grounding. After wires are connected, tuck them
C
carefully inside the post. Align the lantern with post and
secure bottom assembly (A) with Screws (B) (Fig.1 &
2).
5. Install the light bulbs in accordance with the fixture’s
specifications. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!!)
Fig. 2
Your installation is now complete. Return power to the
FIXTURE
WIRES
Black or
Smooth
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Green or
Bare
Copper
(Ground)
junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
HOUSE
WIRES
Black
(Hot)
identical to the fixture purchased.
LA-934E
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green
(Ground)