the great outdoors by Minka Lavery 9909-1-66 Installation Guide

INSTALLATION INSTRUCTIONS
For Model 9909-1
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old fixture,
Fig. 1
including the mounting hardware.
2.
Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3.
Thread the 2 mounting screws (E) into the mounting plate (B)
spaced the same distance apart as the mounting holes in the
fixture canopy (G). Note: The length of the mounting screws (E)
into the mounting plate (B) may be adjusted if necessary.
4.
Attach the mounting plate (B) to the outlet box (A) (not supplied)
with mounting screws (C) (Size: #8-32*0.78"L).
CONNECTING THE WIRES (Fig. 2)
5.
Connect the electrical wires as shown in Fig.2 making sure that all
wire connectors are secured. If your outlet box has a ground wire
(green or bare copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly to the circular
strap using the green screw provided.
COMPLETING THE INSTALLATION (Fig. 1)
6.
7.
Align the canopy (G) to the mounting screws (E) and secure with
cap nuts (F).
Fig. 2
FIXTURE
WIRES
Black or
Smooth
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
Install the bulbs (Type-B. not supplied). DO NOT EXCEED THE
MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA
HOUSE
WIRES
Black
(Hot)
PUISSANCE NOMINALE MAXIMALE!)
8.
Align glass shade (H) followed by cap (J) to canopy (G) and
secure with hex nut (K) followed by finial (K).
9.
Turn on the power at fuse or circuit box.
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)
Fig. 3
Your installation is now complete.
Return power to the
junction box and test the fixture.
Caulking
Backplate