Design House 517094 Installation Guide

10. Install the BULB (Sold separately) referring to fixture
labels for maximum wattage.
MINI PENDANT SERIES
11. Restore electrical power to installation point. Retain this
sheet for future reference.
ASSEMBLY/INSTALLATION INSTRUCTION
IF
IN
DOUBT
ABOUT
ELECTRICAL
INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
FIXTURE CANOPY
LOCKING NUT
SWIVAL
PIPE NIPPLE
1. Before beginning the installation, carefully unpack and
identify all parts.
STEM
2. Turn the electrical power to the installation point OFF.
PIPE NIPPLE
3. Carefully pull the wires through the STEMS into the
FIXTURE CANOPY as shown in Figure 1. Thread PIPE
NIPPLE into STEMS as shown. Attach as many of the stems
as desired to make the suitable height.
Note: Most of Mini Pendant provided with (4) stems
(6”+12”+12”+6”).The quantities and lengths of the stems
depend on the style you purchased.
STEM
PIPE NIPPLE
4. Attach first STEM to SWIVAL located at bottom of
CANOPY.
STEM
5. Attach the last STEM to FIXTURE SOCKET ASSEMBLY
and carefully pull excess wires through CANOPY.
PIPE NIPPLE
6. Using (2) JUNCTION BOX SCREWS, securely fasten the
CROSSBAR to the JUNCTION box.
7.MAKE WIRE CONNECTIONS: Position the FIXTURE
under the JUNCTION BOX, Connect the SUPPLY GROUND
WIRE to the FIXTURE GROUND WIRE. Secure both to the
CROSSBAR with GREEN GROUND SCREW. Using wire
Connectors, connect the SUPPLY WHITE WIRE(S) to the
FIXTURE WHITE(or RIBBED) LEAD(S); Connect the
SUPPLY BLACK (or RED) WIRE to the FIXTURE BLACK
(or SMOOTH) LEAD(S). Make sure that there are no
exposed wires and wrap all connections with approved
electrical tape.
8. Fit the heads of the FIXTURE SCREWS through the
KEYHOLE in FIXTURE CANOPY, Thread (2) LOCKING
NUTS onto the ends of FIXTURE SCREWS. Hand tighten to
secure fixture to ceiling. Be sure that there are no trapped or
pinched wires.
9.Locate GLASS SHADE and pass over the SOCKET.
Thread SOCKET RING onto end of the SOCKET. Hand
tighten until snug.
STEM
FIXTURE SOCKET ASSEMBLY
SOCKET
NOTE:
1. When installing lamps, DO NOT EXCEED MAXIMUM
WATTAGE RATING.
2. Sketches are only for general reference.
Customer Service: 1-800-558-870