Kenroy Home 60540 Instructions / Assembly

60540
ASSEMBLY INSTRUCTIONS
MODEL:
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY.
UNPACK THE OUTDOOR FEATURE LIGHT
The following parts should be included in your solar light kits; (3) LED bodies and (3) Stakes.
DECK INSTALLATION
1.) Insert the stake into the hole on back of the LED body.
2.) Insert the stake of LED light into the proper position in a sunny area.
TROUBLE SHOOTING:
1.) If your Solar LED Light is not functioning properly or losing power mid-cycle, then ensure
the solar panel is positioned in direct sunlight. Your solar panel will need to collect between 6 ~ 8
hours of sunlight to function throughout a full cycle.
2.) Although the battery inside your Seriously Solar panel is designed for maximum longevity,
overtime performance will drop - replacing the battery will correct this issue.
IMPORTANT NOTES:
1.) The led light will turn on automatically at dusk or press the switch to turn on it.
2.) Although there may be some initial charge in battery, we recommend fully charging it before
first use. turn off the led light and leave the solar panel in good sunlight for 6 hours to ensure the
battery is fully charged.
3.) To maximize solar energy intake, the solar panel may be cleaned periodically with a soft rag
and water, do not use chemical solvents.
Download PDF
Similar pages
Trust Helios
Radio Shack Silicon Solar Cell 276-0124 User's Manual
Powerplus Seal
Eglo SOLAR
Eglo 47831
Eglo SOLAR
Eglo SOLAR
CRYSTAL LIGHT - CONRAD Produktinfo.