Laura Ashley HCHM0561 Instructions / Assembly

Assembly Instructions
Chamonix Chandelier # HCHM0561
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
1. Attach nipple(-a) to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Unscrew the bolt nuts out of the set screws and set them
aside.
4. Adjust the arms of the fixture according to the drawing
of the package. Make the set screws though the holes
on the arms. Then fix them to the fixture using the set
screws.
Important:
a. The arms should be positioned with equal
distances between them.
b. The arms should be fixed securely.
5. Secure the loop to the nipple(-b) of the fixture.
6. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain. Then connect one end of the chain with the
loop by using the loop lock.
7. Secure the top loop to nipple(-a) tightly.
8. Thread the fixture wire and fixture grounding wire
through the collar, canopy, top loop, nipple(-a) and
mounting strap.
9. Connect the other end of the chain with the top loop
Fixture
by using the loop lock.
10. Pull out the outlet wires and house grounding wire
from the outlet box. Make wire connections with wire
nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
11. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
12. Attach the glass shades to the glass holders, then secure
them with socket rings.
13. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
14. Turn on the power at the main fuse or circuit breaker box.
Outlet Box
House Grounding Wire
Wire Nut
Hex Nut
Washer
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple(-a)
Canopy
Top Loop
Collar
Loop Lock
Fixture Grounding Wire
Chain
Loop Lock
Fixture Wire
Loop
Nipple(-b)
Bolt Nut
Set Screw
Arm
Glass Holder
Glass Shade
Socket Ring