Assembly Instructions Chantilly Mini Chandelier # MCT033 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THIS INSTRUCTION. Leaf Holder Screw Lock Nut Porcelain Flower Fig.1 Outlet Box House Grounding Wire Wire Nut Hex Nut Washer Mounting Strap Green Grounding Screw Mounting Screw Nipple Canopy 1. Attach the nipple to the mounting strap, then secure it Top Loop with a washer and hex nut. Collar 2. Attach the mounting strap to the outlet box by using Loop Lock two mounting screws. Fixture Grounding Wire 3. Choose the length of the chain you need, then weave Chain the fixture wire and the fixture grounding wire through Loop Lock the chain. Then connect one end of the chain with the Fixture Wire loop by using the loop lock. Loop 4. Secure the top loop to the nipple tightly. Fixture 5. Thread the fixture wire and fixture grounding wire through Porcelain Flower the collar, canopy, top loop, nipple and mounting strap. 6. Connect the other end of the chain with the top loop by using the loop lock. Bobeche 7. Pull out the outlet wires and fixture house grounding Candle Tube wire from the outlet box. Make wire connections with Socket wire nuts: ---The smooth wire (marked) from the fixture to the black wire from the power source. ---The ridged wire (unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box. 8. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar. 9. Attach the bobeches and candle tubes onto the sockets, then install bulbs (not included). Note relamping label at socket area or packaging for maximum allowed wattage. 10. Unscrew the lock nuts from leaf holders. Then secure the big porcelain flowers onto the big leaf holders of the fixture. Secure the small porcelain flowers onto the small leaf holders of the fixture. (See Fig.1) 11. Turn on the power at the main fuse or circuit breaker box.