Warehouse of Tiffany RL7950-1 Instructions / Assembly

ASSEMBLY INSTRUCTIONS
MODEL#: RL7950-1
NOTE:(nly the technical personnel can be allowto fix and
maintain.
IMPORTANT!
Make sure that the power is switch off at the electricity
mains supply before commencing work.
FIXING INSTRUCTIONS
l. Open parts according to the bag as shown in figure B shows, installed
hangs Taiwan screw, and should be fixed to the ceiling in the right place
2. Ground Connection (See picture 1): there are one tapping hole & two
dimples.
Wind the supply ground wire (2) on the green ground screw (15) and then put
it into
tapping hole. Connect the fixture ground wire (3) with supply ground wire
2; by. connecting terwrwal (17). Cuutivn: DO NO: connect ground sire with
Supply power wire.
3. Connect fixture supply wire with power supply wire . Caution: Remember
0 distinguish the positive and negative charges. (See picture 2)
|. Push canopy up to the ceiling and Lock cuttiefishnut ©
, Hang crystal.
REPLACEMENT BULB
Jo not exceed the maximum wattage.
ight bulbs recommended: RL7950-1 E12 1x60W Max.Type B.
LEANING CARE
lean with a soft dry cloth.
AFETY INFORMATION
Lamp used must in rated voltage,and do not touch the
ulb with bare hands . Always switch off the electricity
upply and allow to cool for 1) minutes before changing
he light bulbs.
If the external cables have been demaged Pis change or
epair by manufacturer or service agency or professional
ectrician,In order to avoid the danger.
een
[A