Designers Choice Collection VF2500-4L-SN Installation Guide

INSTRUCTIONS
VF2500-4L-
NOTE:This fixture can be mounted horizontally or vertically.
Safety Instructions
• Follow and save these instructions.
• Always disconnect power at circuit breaker.
• If in doubt, contact a qualified electrician.
Remove glass holder from one end of fixture.
Glass holder
Screwdriver
Screw
Blub
Insert the G9 bulbs.
socket
Back Plate
Attach back plate.
Screw
Plug
Screw
Make wiring connections,
black wire from fixture to black wire from junction box.
white wire from fixture to white wire from junction box.
Connect the copper ground wire to ground wire from junction box.
Black
Black
Screw
Attach fixture to the back plate,using
screws provided.
Back Plate
Fixture
Glass
Glass holder
Screwdriver
Screw
Glass holder
Insert the glass shade on the glass
bracket.Then tighten it by the screw.