GE 17450 Instructions / Assembly

17450-2
LED Path Light
User’s Manual
Thank you on your purchase
of the LED Path Light. Before
installation, please read this
manual carefully and keep
for future reference.
Please check the contents before installation
1. LED Path Light
2. 2 screws and 2 Anchors
2.
INSTALLATION
1.
Before you mount your LED Path Light
1. Remove the LED Path Light back cover by loosening the
screws on the back.
2. Insert 4 NEW “AA” batteries, making sure the polarity
matches.. Do not put the back on until you have gone through
the mounting section of the User’s Manual.
NOTE: Please use only new alkaline or lithium batteries. Do
not mix old with new batteries. Make sure that the polarity
matches.
1/8”
1/8”
Mounting your LED Path Light
Mounting your LED Path Light outside.
1. Select the location for your LED Path
Light.
Anchors - (drywall)
2a. If you are going to use the anchors, then use a 3/16” drill
bit, drill the holes and insert the anchors. Now insert the screws,
leaving them 1/8” from the surface (height of the screw head).
Screws only
2b. To install the screws only, use a 1/8”
drill bit to drill the marked holes and then
insert screws, leaving them 1/8” from the
1/8”
surface (height of the screw head).
3. Now place LED Path Light screw tracks on the screws. Make
sure that they are secure.
*Recommended to mount the screws parallel to the ground if you are
mounting on a vertical surface.
1/8”
Template
guide
Template
CAUTION
• Batteries may leak harmful liquids or ignitable
materials or explode causing injury and
product damage
• Do not mix old and new or other battery types
• Replace all batteries at the same time
• Remove batteries if product is to be unused for
extended periods of time
PRECAUCIÓN
• Las pilas pueden desprender líquidos nocivos o
5/4/10
materiales inflamables que pueden causar daño
al usuario o al producto
• No se deben usar juntas pilas nuevas y viejas o
is a trademark
distintos
tipos de pilas of the General Electric Company
• Cambie
todas las
pilas al mismo
tiempoto Jasco Products Company
and
is used
under
license
• Retire
si el producto se
va a utilizar
LLC,
10lasE.pilas
Memorial
Road,
Oklahoma City, OK 73114.
durante largos períodos de tiempo
This Jasco product comes with a limited lifetime
warranty. Visit www.jascoproducts.com for details.