Casablanca 59164 Instructions / Assembly

Add to my manuals
15 Pages

advertisement

Casablanca 59164 Instructions / Assembly | Manualzz
Table of Contents
Tools Needed
Mounting Options
1.888.227.2178
Ceiling Bracket
30 inches
To register your fan, please visit:
www.CasablancaFanCo.com/register
Wiring
11
Troubleshooting
?
?
?
15
PA G E
14
PA G E
1
M8524-01 • 04/29/14 • © Casablanca Fan Company
13
Operation, Maintenance
& Cleaning
PA G E
PA G E
12
PA G E
Remote Control
5
Blades
10
PA G E
Globe
4
Canopy
9
PA G E
6
Save your receipt for proof of purchase.
3
PA G E
Downrod
Ladder
PA G E
2
PA G E
7 feet
PA G E
We are proud of our work and appreciate
the opportunity to supply you with the
best ceiling fan available anywhere in the
world.
What to Expect with
Your Installation
PA G E
Congratulations on purchasing your new
Casablanca® ceiling fan! It will provide
comfort and performance in your home
or office for many years. This installation
and operation manual contains complete
instructions for installing and operating
your fan.
www.CasablancaFanCo.com
www.CasablancaFanCo.com
What to Expect with Your Installation
1.888.227.2178
Read and Save These Instructions
If you are unfamiliar
with wiring, use a
qualified electrician.
This product conforms to UL Standard 507.
WARNINGS
30 inches
from blade tip to
nearest wall or
obstruction
Must be able to
secure the fan to
building structure or
fan-rated outlet box
Know your wiring
You may need a
friend to help you.
Assess location
1
Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.
Check box to see
fan weight
7 feet
from bottom
edge of blade
to the floor
Assess ceiling angle
Standard Downrod
for ceilings 8-10 feet high
2
Shorter Downrod
3
Longer Downrod
for fans installed close to ceiling
for ceilings 10 feet or higher
Select a downrod length
2
M8524-01 • 04/29/14 • © Casablanca Fan Company
w.1 - To reduce the risk of fire, electrical shock, or personal
injury, mount fan directly from building structure and/or an
outlet box marked acceptable for fan support of 70 lbs (31.8 kg)
and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the
circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off
position, securely fasten a prominent warning device, such as a
tag, to the service panel.
w.3 - To reduce the risk of fire, electrical shock, or motor damage,
use only Casablanca Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades,
or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
CAUTIONS
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,
use a qualified electrician.
c.2 - Use only Casablanca replacement parts.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications.
Tools Needed
www.CasablancaFanCo.com
Ladder
Pliers
Wire Strippers
9/64” Drill Bit
(optional)
Power Drill
(optional)
If mounting to a support structure, you will also need these tools.
3
M8524-01 • 04/29/14 • © Casablanca Fan Company
Screwdrivers
1.888.227.2178
34O
CEILING
Mounting Options
OPTION 1
If you have a flat ceiling:
1. You will need a longer downrod (sold separately).
2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).
Angled
Mounting
Standard
Mounting
Style
Ceiling
Outlet Box
(required)
Use the three steps below to determine if your ceiling angle is greater than 34°
2
1
1.888.227.2178
Support
Structure
Support
Structure
OPTION 2
If you have an angled ceiling:
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
3
34°
PLACE
FOLD
against wall
on dotted line
Guide Touches
BOTH Ceiling & Wall
You need ONLY
a Longer
Downrod
*most common
SLIDE
toward ceiling
Guide Touches Wall
but NOT Ceiling
2
ON
SITUAT
I
1
ON
SITUAT
I
WALL
Standard
Mounting
Hang your fan by a standard downrod (included).
www.CasablancaFanCo.com
Use Standard Mounting
or Low-Profile Mounting
to hang the fan from a flat ceiling.
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
4
M8524-01 • 04/29/14 • © Casablanca Fan Company
Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.
Ceiling Bracket
www.CasablancaFanCo.com
1.888.227.2178
r
we
o
nP
r
Tu
OFF
For angled ceilings, point
opening toward peak.
Use wood screws
Use machine screws
(included) when securing
(provided with outlet
to support structure with
box) when securing to
approved electrical outlet existing ceiling fan-rated
box. Drill 9/64” pilot holes
outlet box. Make sure
in support structure to aid
it is securely installed
in securing ceiling bracket and is acceptable for fan
with hardware found in support of 31.8 kg (70 lbs)
the
hardware bag.
or less.
Make sure all four bumpers are
still attached.
If you are unable to do this,
call Technical Support at
1-888-277-2178.
Refer to warning w.1 on pg. 2
5
M8524-01 • 04/29/14 • © Casablanca Fan Company
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Option 1
Downrod
www.CasablancaFanCo.com
1.888.227.2178
skip to next page
Standard
Downrod
for ceilings 8-10’ high
Steps 1-5 to remove standard downrod pipe
1
2
4
Sold Separately
Slide
3
10
9
8
Steps 6-10 to reassemble with new pipe
6
M8524-01 • 04/29/14 • © Casablanca Fan Company
5
Slide
Option 3
Longer
Downrod
for angled
ceilings or
ceilings 10’ or
higher
Shorter
Downrod
for fans installed
close to ceiling
Included
Option 2
Included
(pre-assembled)
If you need a different downrod length follow these steps:
7
6
Downrod (continued)
KEEP!
(not to scale)
8”
&
3/8”
1.888.227.2178
STRIP
CUT
www.CasablancaFanCo.com
!
KEEP
Remove the pre-installed
setscrew so that the downrod
can be inserted.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
3/8”
If the setscrew is not tightened
securely, the fan may fall.
7
M8524-01 • 04/29/14 • © Casablanca Fan Company
Downrod (continued)
Put the wires and downrod through the canopy.
Let the canopy sit loosely on top of the fan.
www.CasablancaFanCo.com
DO NOT PICK THE FAN UP BY THE
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
8
M8524-01 • 04/29/14 • © Casablanca Fan Company
1.888.227.2178
Wiring
www.CasablancaFanCo.com
OM
FR
CEILIN
White (grounded)
Using orange wire
connectors from
the
hardware bag,
connect the black wire
(ungrounded) from
the ceiling to the black
wire from the fan.
Connect the white wire
(grounded) from the
ceiling to the white wire
from the fan.
T
White
CEIL
KE
M
Black
Using an orange wire
connector from
the
hardware bag,
connect the three
grounding wires
(green, green/yellow
stripe, or bare copper)
coming from the ceiling,
downrod, and hanging
bracket.
Green/Yellow
Stripe
FR
O
CEILIN
OM
G
FR
Black (ungrounded)
Green/Yellow
Stripe
G
Green/Yellow Stripe
(grounding)
OM FAN
FR
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
1.888.227.2178
ING BR
AC
FRO
Refer to CAUTION c.1 on pg. 2
9
M FA N
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
M8524-01 • 04/29/14 • © Casablanca Fan Company
Canopy
www.CasablancaFanCo.com
Screw
Holes
Position the canopy so that, when
lifted into place, the canopy fits into
the hanging bracket as shown.
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
Note: Fan style may vary.
10
M8524-01 • 04/29/14 • © Casablanca Fan Company
1.888.227.2178
Blades
www.CasablancaFanCo.com
Attach a blade tip to each blade using
two blade tip screws, found in
the
hardware bag.
Insert four blade assembly screws and four
blade washers, found in the
hardware
bag, into each blade as shown. Install the
screws into the posts in each blade arm.
11
M8524-01 • 04/29/14 • © Casablanca Fan Company
1.888.227.2178
Globe
www.CasablancaFanCo.com
1.888.227.2178
Tab
Notch
Globe
CONGRA
T
YOU’REULATIONS!
DONE!
Position the notches in the outer rim of
the globe so they line up with the tabs on the
inside of the rim on the light kit.
Carefully lift the globe up inside the light
kit as far as it will go, then rotate the
globe clockwise until it is held tightly in
place by the four tabs.
12
M8524-01 • 04/29/14 • © Casablanca Fan Company
See next page for fan
operation instructions.
Remote Control
ON
D
ON
ON ECE
1
ON ECE
1
2
3
2
3
SET
4
4
Set
D
ON
Once the power
is turned on, the
remote must be
paired within 60
seconds. Pairing
is only required
once after initial
installation.
Battery
Door
1.888.227.2178
ON
r
Tu
D
r
we
o
nP
www.CasablancaFanCo.com
ON ECE
1
2
3
SET
4
Battery
Remove battery door. Change the
dip switch settings if the frequency
matches a previously installed remote
transmitter. Install A23 or MN21
alkaline battery in the proper polarity
and replace the battery door. To pair
the remote, hold down the Set button
for 5 seconds. Pairing is complete
when the small LED button on the
remote flashes twice.
If a light kit is installed on your
fan, choose the light bulb mode
by moving the toggle switch. For
LED light kits, set the switch to
“ON.” Replace the battery door.
13
M8524-01 • 04/29/14 • © Casablanca Fan Company
To install the transmitter
cradle, hand-tighten the
provided screws to mount the
cradle to the wall.
Operation, Maintenance & Cleaning
www.CasablancaFanCo.com
1.888.227.2178
LED
Fan
Speed
Dial
Off
(High)
(Low)
Reverse
Light
ON
D
ON ECE
1
2
+
To select fan speed press one of
the numbers on the Fan Speed
Dial. To calibrate the fan speed,
run the fan on “6” for 90 seconds
after each AC power reset. The
small LED button on the remote
flashes to indicate a signal has
been sent to the fan.
To reverse the air flow direction,
press the Reverse button while
fan is running. Press Light button
to turn lights off/on. To dim the
lights, press the light button for
more than one second. Light will
cycle from brightest to dimmest.
Release the light button when
desired brightness is achieved.
3
SET
4
_
To change the battery, remove
the battery door. Remove battery
and replace with A23 or MN21
alkaline battery. Please observe
proper polarity placement.
14
M8524-01 • 04/29/14 • © Casablanca Fan Company
For cleaning the fan, use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the finishes.
Troubleshooting
Fan doesn’t work
• Press a fan speed button (1-4).
• Check the circuit breaker to
ensure the power is turned on.
• Check the remote control
battery.
• Make sure that you have paired
the remote control.
• Make sure the blades spin
freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 9.
Fan speeds are incorrect
• Turn power from the circuit
breaker off and back on, then
run the fan on speed “6” for at
least 90 seconds and check the
fan speeds again.
www.CasablancaFanCo.com
1.888.227.2178
Excessive wobbling
• Tighten all of the blade
screws until they are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to
balance the fan.
Noisy Operation
• Tighten the blade and blade tip
screws until they are snug.
• Check to see if any of the blades
are cracked. If so, replace all of
the blades.
Remote doesn’t work
• Install a fresh battery in the
remote control.
• Make sure you have paired the
remote.
AUTHORIZED SERVICE CENTERS
For the most updated listing of Casablanca Authorized Service Centers,
visit www.CasablancaFanCo.com or call toll free 1-888-227-2178.
15
M8524-01 • 04/29/14 • © Casablanca Fan Company
Casablanca fans have the power to cut your cooling
costs up to 40%.
Beat the High Cost of Cooling
The air movement created by a Casablanca ceiling
fan lets you set your thermostat higher and still stay
comfortable. Every degree you raise the thermostat
saves up to 7% on energy costs. So, you can cut back on
expensive air conditioning ... and save up to 40%* on
cooling. In winter, your Casablanca fan recirculates warm
air and saves up to 10%* on heating bills.
* On average at low speed settings. Your savings may
vary based on climate, building type and thermostat
setting.
Save Energy and Money While Protecting
the Environment
Congratulations! You’re saving energy and money while
protecting the environment by purchasing this ENERGY
STAR qualified Casablanca ceiling fan! With this purchase,
you are doing your part to protect the environment.
Your new ceiling fan has earned the ENERGY STAR label
because it meets high energy efficiency specifications
set by the Environmental Protection Agency (EPA).
ENERGY STAR labeled ceiling fans save energy because
they have more efficient fan motors and air delivery due
to more aerodynamic blade configurations. Ceiling fan
models bearing the ENERGY STAR label move air
14 - 20% more efficiently than typical ceiling fan models.
For more information on ENERGY STAR, visit
www.energystar.gov.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement