Symmons SLW-5412 Installation Guide
Add to My manualsadvertisement
Degas ™
Widespread Lavatory Faucet
SLW-5412
Installation and Service Instructions
Model Number
SLW-5412......
Lavatory faucet with pop-up drain
Tools & Materials
Decorative Finish Code
Append to part numbers when applicable
-STN Satin Nickel
-ORB Oil Rubbed Bronze
-- Chrome (standard)
Thread Locker
Included
Plumbers
Putty
Pipe
Sealant
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 7:30 am - 7:00 pm EST
Please check Symmons website for technical help, the latest product information and warranty policy.
www.symmons.com/service
Quick Install Guide Degas Widespread Lavatory Faucet, SLW-5412
Step 9
Flush lines and check for leaks
Step 2
Attach handles
Step 3
Install lift rod & attach spout
Step 4
Connect hoses between
valves and spout
Non-
Removable Removable
position position
HOT
Step 5
Attach drain body to flange
Step 1
Attach control valves
Pipe
Sealant
Step 8
Connect supply lines
(supply hoses not included)
COLD
Step 7
Connect lift rod, clevis strap, pivot rod and adjust linkage
Step 6
Install stopper and pivot rod
Installation Instructions
Caution: If replacing an older faucet ensure water supply is turned OFF before removing, then open faucet valves to relieve water pressure.
Step 1 Attach hot & cold control valves rotate until threads stop
3 finished deck front view
2
4
Step 4 Connect hoses between valves & spout finished deck front view
1 5
HOT valve: red label
COLD valve: blue label
Step 2 Attach handles
OFF
CW=OFF
HOT
(red label) finished deck front view COLD
(blue label)
Step 3 Install lift rod and attach spout
1
Thr ead Locker
1 drop
2
OFF
CCW=OFF
Pipe
Sealant
Tee and hose assembly required rotational swing clearance at base of spout is 4 inches (102 mm) minimum from hitting back wall
Step 5 Attach drain body to flange
* flange washe r
(optional)
1
PLUMBERS
PUTTY
* use included flange
washer only when
plumbers putty is
not available
2 flange beveled washer friction washer flange nut back of sink finished deck front view
Page 2
Step 6 Install stopper and pivot rod
1 non removable removable
Step 9 Flush water supply lines
2
Sealant
Step 7 Connect lift rod and adjust linkage
Care of faucet finish
Clean finish area by using mild soap and water or non-abrasive cleaner and then rinse immediately. A non-abrasive wax may be used to preserve finish area.
Valve cartridge replacement
1/2" (13 mm) 17 mm deep socket wrench
Step 8 Connect supply lines supply hoses
not included
HOT
COLD
Page 3
Replace handles
Lead free brass valve cartridges
(reference replacement parts table)
HOT: OFF=CW
0 or 2 grooves
COLD: OFF=CCW
1 or 3 grooves depending on supplier
OFF
CW=OFF OFF
CCW=OFF
Dimensions Degas Widespread Lavatory Faucet
, SLW-5412
8"(203 mm) min
16"(406 mm) max
4" (102 mm) min
2-3/4" (70 mm)
Deck thickness
1-5/8" (41 mm) max
Hole size
1-1/8" (29 mm) min
1-1/4" (32 mm) max
1/2"-14 NPSM
Flexible hose
2-1/4" dia
(57 mm)
1-1/8"
(29 mm)
7-3/8"
(186 mm)
4-1/2"
(115 mm)
5-1/8"
(129 mm)
1/8"
(4 mm)
4"
(102 mm)
2" dia
(51 mm)
5/8" dia
(17 mm)
Hole size
1-1/8" (29 mm) min
1-1/4" (32 mm) max
1" dia
(25 mm)
5/8" (16 mm)
Note: Dimensions subject to change without notice
Parts Assembly Degas Widespread Lavatory Faucet, SLW-5412
handle assembly spout assembly standard
aerator
2.2 gpm valve
cartridge flange nut
1/2 "valve body
1/2" coupling nuts lift rod spout base and gasket u-gasket u-washer nut
Replacement Part Kits
Part Number Item
WSF-542L-KIT * .....
1 handle assembly included; used for either hot or cold
Single handle kit
plug button phillips panhead
(M4x.7x16 mm) handle bushing handle escutcheon base and gasket
LN-333-KIT.............
FLR-102-1.5-KIT.....
LN-742-KIT.............
Aerator flow rates
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
1.0 gpm (3.8L/min)
Aerator aerator removal tool included in all kits, p/n LN-383
Valve cartridge, lead free brass
KN-114E................ HOT: OFF = CW
0 or 2 grooves widespread tee fitting
12" flex hose,
1/8"MNPT x 1/2" NPSM
KN-113E................
COLD: OFF = CCW
1 or 3 grooves
RL-205 * Lift rod pop-up drain assembly
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
M-F 7:30 am - 7:30 pm EST or check our website at www.symmons.com for a list of Symmons distributors.
Symmons Industries, Inc.
Phone: (800) 796-6667
■
■
31 Brooks Drive
■
Fax (800) 961-9621
Braintree, MA 02184
Website: www.symmons.com
■
Email: [email protected]
* Note: When ordering replacements parts for faucets with finish suffix code to part numbers marked with an asterisk ( * ).
© 2014 Symmons Industries, Inc. Printed in U.S.A.
■
LN-979
■
ZV-1020
■
120514
advertisement
Related manuals
advertisement