Samsung LN-P327W Specifications

Ver01
날짜
모델명
08월 4일 LN-P267W
구분
내용
24쪽, 28쪽 수정
작성자:이현정
입수경위
IB Code
박지선->김채갑,메일,7-29 BN68-00751A
(EO수정사항, 공통적으로적용)
coverEng.qxd
8/7/04 7:08 PM
Page 1
LN-P267W
LN-P327W
TFT-LCD TELEVISION
This device is a Class B digital apparatus.
BN68-00751A-01
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 480p).
• Digital Ready TV: When you
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 1080i).
Do not leave the screen in pause mode for
extended periods of time as you may
experience the same problem with products
by other manufacturers.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the set-top box output is 1080i).
When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen
size "16:9" or "Panorama" selected, you will
be able to watch the program but the top and
bottom edges of the screen will be cropped.
Note: If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience the same problem with products
by other manufacturers.
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 2
• Integrated Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a set-top box).
• When you watch an analogue
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience the same problem with products
by other manufacturers.
• When you watch a DVD, CD or a
video in wide screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience the same problem with products
by other manufacturers.
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 3
CONTENTS
Chapter 1: Your New TV
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . .
Buttons on the Lower-Right Part of the Panel . . . . . . . . . . . . . .
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . .
If remote control doesn’t work . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
2
3
4
6
6
Chapter 2: Installation
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 7
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . . 7
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . . 8
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting to a Cable Box that Descrambles All Channels . . . . 9
Connecting to a Cable Box that Descrambles Some Channels . . 9
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting a DVI-D Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a Digital TV Set-top box . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to Connect the Ferrite Core (LN-P327W) . . . . . . . . . . . . . . . . 14
Chapter 3: Operation
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the PRE-CH Button to select the Previous Channel . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . .
Storing Channels in Memory (Automatic Method) . . . . . . . . .
Adding and Erasing Channels (Manual Method) . . . . . . . . . . .
Labeling Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Set-up Your Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . .
To Select Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
15
15
15
15
16
16
17
20
21
22
22
23
24
24
25
25
26
27
28
29
30
Chapter 4: Special Features
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Contents-1
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 4
CONTENTS
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . .
Swapping the Contents of the PIP and Main image . . . . . . . . .
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Position of the PIP Window . . . . . . . . . . . . . . . .
Changing the Size of the PIP Window . . . . . . . . . . . . . . . . . . .
DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . .
My Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Easy Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detail Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dynamic Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brightness Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Screen Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Select the WOW Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Sound Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Headphone Sound . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Main or Sub Sound . . . . . . . . . . . . . . . . . . . . . . . . . .
Sub Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . .
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . . .
How to Set up Restrictions Using
the ‘TV Parental Guidelines’ . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Set up Restrictions Using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X, NR . . . . . . . . . . . . . . . . . . . . . . .
How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’) . . . . . . . . . . . . . . . . .
Color Weakness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
34
35
35
35
35
35
36
37
37
38
39
40
41
41
42
43
44
45
46
47
48
49
50
52
53
55
55
56
57
59
60
61
62
Chapter 5: PC Display
Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . .
Setting Up Your PC Software (Based on Windows XP) . . . . . .
How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . . . .
Initializing the Screen Position or Color Settings . . . . . . . . . .
63
63
64
65
66
67
Chapter 6: Troubleshooting
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Appendix
Installing the Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . . .
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents-2
70
71
71
72
73
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 1
Chapter One
Y O U R N E W TV
List of Features
My Color Control:
Users can adjust colors to their preference by adjusting skin, sky and grass
tones.
Dynamic Contrast:
Automatically detects the input visual signal and adjusts to create optimum
contrast.
Brightness Sensor:
Adjusts the screen brightness automatically depending on the brightness of
the surrounding environment.
Color Weakness :
This feature enables those with a color weakness to view images as those
with normal vision.
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control (BN59-00409B)
& Batteries (AAA x 2)
Owner’s
Instructions
RF Cable
(AA39-00039A)
Power Cord
(3903-000144)
LN-P327W:
Cover-hole
Ferrite Core (3301-001201) LN-P327W (BN68-01374A)
x 2 (See page 14)
LN-P267W (BN68-01360A)
English-1
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 2
Y O U R N E W TV
Familiarizing Yourself with Your New TV
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
(POWER)
SOURCE
Press to turn the TV on and off.
Displays a menu of all of the available
input sources (TV, AV, S-VIDEO, Component 1,
Component 2, DVI, PC).
CH
Press to change channels.
Also press to highlight various items
on the on-screen menu.
– VOL +
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
POWER INDICATOR
Lights when TV is in standby mode.
Lights green after setting on/off timer.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot
on the TV.
LIGHT DETECTING SENSOR
MENU
Press to see an on-screen menu of
your TV’s features.
Adjusts the brightness of screen automatically
by detecting brightness of the surrounding
environment. This sensor works when
Brightness Sensor is on.
SPEAKERS
English-2
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 3
Y O U R N E W TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 7-14.
DVI-D INPUT
S-VIDEO
Connect to the digital video output jack on your
DVD/Set-top box.
(DVI-D terminal does not support PC.)
Connect an S-Video signal from
a camcorder or VCR
PC VIDEO (D-SUB) INPUT
Connect a video signal from
a camcorder or VCR.
Connect to the video output port on your PC.
VIDEO/AUDIO INPUT
PC AUDIO INPUT
ANT IN
Connect to the audio output jack on your PC.
Connect to an antenna or to a cable TV
system.
DVI-D AUDIO INPUT
Connect to the audio output jack on your
DVD/Set-top box.
COMPONENT IN 1
Connect component video/audio from a
DVD/VCR/Set-top box.
COMPONENT IN 2
Connect component video/audio from a
DVD/VCR/Set-top box.
English-3
SUBWOOFER OUTPUT
Connect to an active (powered)
subwoofer.
HEADPHONE JACK
Connect a set of external headphones
for private listening.
POWER INPUT
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 4
Y O U R N E W TV
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the
remote, always point it directly at the TV. You can also use your remote control to operate
your VCR, Cable box, DVD player or Samsung Set-Top box.
POWER
MODE
Turns the TV on and off.
(See page 15)
Selects a target device to be controlled
by the Samsung remote control
(TV, Samsung STB, VCR, CABLE, DVD)
Press to make sure that the TV LED,
STB LED, VCR LED, CABLE LED, or
DVD LED is illuminated.
(See pages 17~19)
PC MODE
Press to switch to the PC mode.
(See page 63)
P.SIZE
NUMERIC BUTTONS
Press to change the screen size.
(See page 41)
Press to change the channel.
MUTE
CH
and CH
(Channel UP/Down)
Press to temporarily cut off
the sound. (See page 15)
Press CH
or CH
to
change channels. (See page 15)
MENU
VOL + and VOL -
Displays the main on-screen
menu. (See page 16)
Press to increase or decrease
the volume. (See page 15)
SOURCE
Press to display all of the available
video sources.
UP / DOWN / LEFT /
RIGHT / ENTER
Use to select on-screen menu
items and change menu values.
(The remote control will only
function with VCR or DVD units
that are compatible with the LCD TV.)
PIP FUNCTIONS
Picture-in-Picture ON/OFF
(See pages 34~35)
English-4
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 5
Y O U R N E W TV
+100
PRE-CH
Press to select channels over 100.
For example, to select channel 121,
press “+100”, then press “2” and “1”.
(See page 23)
Tunes to the previous channel.
(See page 15)
INFO
Use to see information on the
current broadcast. (See page 16)
SLEEP
Press to select a time for the TV to
turn off automatically. (See page 52)
EXIT
Press to exit the menu.
P.MODE
SIZE
Press to make the PIP window
double, large or small.
(See page 35)
Adjusts the TV picture by selecting
one of the preset factory settings.
(See page 27)
S.MODE
CH
Displays the available channels
in sequence.
(These buttons change channels
in the PIP window only.)
(See page 35)
Adjusts the TV sound by selecting
one of the preset factory settings
(or selects your personal,
customized sound settings).
(See page 29)
STILL
RESET
Press to stop the action during
a particular scene. Press again to
resume normal video.
(See page 41)
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds
before use.
AUTO PROG.
Press to automatically store
selected TV/cable channels.
(See page 23)
SET
Adjusts 5 separate devices - TV,
VCR, Cable, DVD, or Samsung
Set-top box.
(See pages 17~19)
ADD/DEL
Use to store and delete channels
to/from memory. (See page 24)
DNIe
Press to improve the digital video
quality. (See page 36)
MTS
(Multi channel Television Stereo)
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast). (See page 45)
FAV.CH
Tunes to the channels in your
favorite channel list. (See page 25)
VCR/DVD Functions
-
Rewind
Stop
Play/Pause
Fast/Forward
English-5
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 6
Y O U R N E W TV
Installing Batteries in the Remote Control
1
Slide the cover out
completely.
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
2
Install two AAA size
batteries.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
3
Replace the cover.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
If remote control doesn’t work
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
English-6
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 7
C h a p t e r Tw o
I N S TA L L AT I O N
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on page 8.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 8.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a 30075 ohm adaptor (not
supplied). Use a
screwdriver to tighten
the screws.
2
Plug the adaptor into
the ANT IN
terminal on the
bottom of the back
panel.
English-7
BN68-00751A-01eNG.qxd
8/7/04 6:30 PM
Page 8
I N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna
lead into the
ANT IN terminal
on the bottom of the
back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the ANT IN
terminal on the
bottom of the
rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.
English-8
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 9
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
2
Connect this cable
to a two-way splitter.
3
Connect a RF
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
English-9
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 10
I N S TA L L AT I O N
4
Connect a RF
cable between the
ANT OUT terminal
on the cable box
and the B–IN
terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the VHF/UHF
terminal on the rear
of the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English-10
BN68-00751A-00ENG.qxd
8/7/04 8:54 PM
Page 11
I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-10).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal
on the back of the
VCR.
3
Connect an RF
cable between the
ANTENNA OUT
terminal on the VCR
and the antenna
terminal on the TV.
4
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
L-AUDIO-R jacks on
the TV.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook
up to the left and right audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
5
Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
VIDEO jack on the
TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* Each external input source device has a different back panel configuration.
English-11
BN68-00751A-00ENG.qxd
8/7/04 8:55 PM
Page 12
I N S TA L L AT I O N
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
2
Connect an audio cable
between the AUDIO
OUT jacks on the VCR
and the L-AUDIO-R
jacks on the TV.
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO jack on
the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
Connecting a DVD/Set-top box via DVI
1
Connect a DVI-D
cable between the
DVI connector
on the TV
and the DVI connector
on the DVD player/
Set-top box.
2
Connect an audio
cable between the
L-AUDIO-R jack on the
TV and the
AUDIO OUT jacks
on the DVD player/
Set-top box.
* Each external input source device has a different back panel configuration.
English-12
BN68-00751A-00ENG.qxd
8/7/04 9:01 PM
Page 13
I N S TA L L AT I O N
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect an audio
cable between the
COMPONENT1 or
COMPONENT2
L-AUDIO-R jacks on
the TV and
the AUDIO OUT jacks
on the DVD player.
2
Connect a video cable
between the
COMPONENT1 or
COMPONENT2
(Y, PB, PR) jacks on
the TV and the
COMPONENT VIDEO
OUT (Y, Pb, Pr) jacks
on the DVD player.
Note: For an explanation of Component video, see your DVD player owner's manual.
* Each external input source device has a different back panel configuration.
Connecting a Digital TV Set-top box
The connections for a typical Set-top box are shown below.
1
Connect an audio
cable between the
COMPONENT1
or COMPONENT2
L-AUDIO-R jacks
on the TV and the
AUDIO OUT jacks on
the Set-top box.
2
Connect a component
video cable between
the COMPONENT1 or
COMPONENT2
(Y, PB, PR) jacks on
the TV and the
COMPONENT VIDEO
OUT (Y, Pb, Pr) jacks
on the Set-top box.
Note: For an explanation of Component video, see your Set-top box owner's manual.
* Each external input source device has a different back panel configuration.
English-13
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 14
I N S TA L L AT I O N
Connecting a PC
- Connect the D- Sub cable to “PC (PC IN)” on the rear of your set.
- Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your TFT-LCD
and the other end to “Audio Out” of the sound card on your computer.
TV Rear panel
PC VIDEO CABLE ( D-SUB )
(Optional)
PC AUDIO CABLE
(Optional)
How to Connect the Ferrite Core (LN-P327W)
The provided Ferrite Cores reduce EMI (E1ectromagnetic Interference) noise from
electrical or electronic products.
After connecting AV or Component cable to the TV, install the Ferrite Cores as
shown in the picture.
English-14
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 15
Chapter Three
O P E R AT I O N
Turning the TV On and Off
Press the POWER button on the remote.
You can also use the POWER button on the lower-right part of the panel.
Changing Channels
Using the Channel Buttons
1
Press the CH
/
buttons to change channels.
When you press the CH /
buttons, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized.
Using the PRE-CH Button to select the Previous Channel
1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
Adjusting the Volume
1
Press the VOL +/– buttons to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press MUTE and the sound cuts off.
” will appear in
The word “
the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply
press the VOL +/- buttons.
English-15
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 16
O P E R AT I O N
Viewing the Display
The display identifies the current channel and the status
of certain audio-video settings.
The on-screen displays
disappear after about ten seconds.
Press the INFO button once more
or wait approximately 10 seconds
and it disappears automatically.
Allows the user to adjust the
settings according to his/her
preference and shows the
current settings.
1
Press the INFO button on the
remote control.
The TV will display the
channel, the type of sound,
and the status of certain
picture and sound settings.
Viewing the Menus
The on-screen menus
disappear from the screen after
about two minutes.
1
With the power on, press
the MENU
button.
The main menu appears
on the screen. It’s left
side has five icons:
Input, Picture, Sound,
Channel, Setup.
2
Use the UP/DOWN
Then press the ENTER
sub-menu.
buttons to select one of the 5 icons.
button to access the icon’s
3
Press the EXIT button to exit.
English-16
You can also use
the MENU , CH Up/Down,
Volume Up/Down, and the
ENTER
buttons on the TV
to make selections.
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 17
O P E R AT I O N
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes:
TV, VCR, CABLE, DVD, or Samsung Set-top box. Pressing the corresponding button on the
remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
Note
The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
This remote control is only compatible with Samsung Set-top boxes.
Setting Up the Remote to Operate Your VCR
1 Turn off your VCR.
2 Press the MODE button and make sure that the VCR LED
is illuminated.
3 Press the SET button on your TV’s remote control.
4 Using the number buttons on your remote control, enter
three digits of the VCR code listed on page 20 of this
manual for your brand of VCR. Make sure you enter three
digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5 Press the POWER
button on the remote control. Your VCR
should turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps
2, 3 and 4, but try one of the other codes listed for your
brand of VCR. If no other codes are listed, try each VCR
code, 000 through 086.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
English-17
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 18
O P E R AT I O N
Setting Up the Remote to Operate Your Cable Box
1 Turn off your cable box.
2 Press the MODE button and make sure that the CABLE LED
is illuminated.
3 Press the SET button on your TV’s remote control.
4 Using the number buttons on your remote control, enter three
digits of the cable box code listed on page 20 of this manual
for your brand of cable box. Make sure you enter three digits
of the code, even if the first digit is a “0.”
If there is more than one code listed, try the first one.
5 Press the POWER
button on the remote control. Your cable
box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps
2, 3 and 4, but try one of the other codes listed for your brand
of cable box. If no other codes are listed, try each code, 000
through 074.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume.
English-18
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 19
O P E R AT I O N
Setting Up the Remote to Operate Your DVD
1Turn off your DVD.
2 Press the MODE button and make sure that the DVD LED is
illuminated.
3 Press the SET button on your TV’s remote control.
4Using the number buttons on your remote control, enter three
digits of the DVD code listed on page 20 of this manual for
your brand of DVD. Make sure you enter three digits of the
code, even if the first digit is a “0.”
If there is more than one code listed, try the first one.
5 Press the POWER
button on the remote control. Your DVD
should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and
4 but try one of the other codes listed for your brand of DVD.
If no other codes are listed, try each code, 000 through 009.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
English-19
BN68-00751A-01ENG.qxd
8/7/04 6:30 PM
Page 20
O P E R AT I O N
Remote Control Codes
VCR Codes
Brand
Code
Aiwa
024
Curtis Mathes
009 016 017 023 024 055 062 073 076
Funai
024
GE
009 016 017 041 062
Hitachi
014 024 044 045
JC Renney
011 014 016 017 023 025 039 044 060 062
Kenwood
011 023 025 039 055
Magnavox
017 038 062 065
Marantz
011 017 023 025 038 039 055 070
NEC
011 023 025 039 055 070 073
Panasonic
017 062 084 086
Philco
017 038 062 065
Philips
017
Pioneer
014 025 042 059
RCA
009 014 016 017 037 044 046 063 078
Samsung
000
Sanyo
011 021
Sears
011 014 018 021 027 028 044 052 057
Sharp
015 036 048 054
Sony
026 035 047
Sylvania
017 024 038 062 065
Toshiba
014 022 028 057 058
Cable Box
Brand
Code
Hitachi
045 051 054
Panasonic
011 035 047 069
Phlips
015 016 027 029 034 036 037 040 041 048 049
Pioneer
026 028 052
RCA
008 035 074
Samsung
000
Zenith
022 050 065 069
DVD
Brand
Code
Curtis Mathes
009
JVC
003
LG
001
Samsung
000
Sony
004
Panasonic
006
ProScan, RCA
008
English-20
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 21
O P E R AT I O N
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER
button on the remote control.
The message “Plug & Play”
is displayed.
2
Select the appropriate
language by pressing the
UP/DOWN
buttons.
Press the ENTER
button
to confirm your choice.
The message “Antenna Input
Check” is displayed with
“OK ” selected.
Press the ENTER
button.
3
Press the UP/DOWN
buttons to select “Air”, “STD”,
HRC”, or “IRC”, then press
the ENTER
button.
Press the ENTER
button to stop.
4
Press the LEFT/RIGHT
buttons to move to the “Hour”,
“Minute” or “am/pm”.
Set the “Hour”, “Minute” or
“am/pm” by pressing the
UP/DOWN
buttons. (Refer to
“Setting the Clock” on page 49.)
5
Press the MENU
button to
confirm your setting.
The message “Enjoy your watching”
is displayed.
English-21
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 22
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an antenna or a cable system).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the ENTER
button.
Repeatedly press the
UP/DOWN
buttons to
cycle through these choices:
“Air”, “STD”, “HRC”, or “IRC”
(all cable TV).
Press the EXIT button to exit.
Note: STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
Proceed to “Storing Channels in Memory” (next page).
English-22
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 23
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (Air, STD,
HRC, or IRC).
See steps 1~2 on the
previous page.
2
Press the UP/DOWN
buttons to select
“Auto Program”.
Press the ENTER
button.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about
one to two minutes.
Press the ENTER button at
any time to interrupt the
memorization process and
return to the “Channel” menu.
3
Press the ENTER
to select “Start”.
button
The TV will begin memorizing
all of the available channels.
4
After all the available
channels are stored, the “Auto
Program” menu reappears.
Press the EXIT button to exit.
To select channels over 100
Ex) Press
to select channel 108.
English-23
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 24
O P E R AT I O N
Adding and Erasing Channels (Manual Method)
1
Use the number buttons to
directly select the channel to
Add or Delete.
Press the MENU
display the menu.
button to
Press the UP/DOWN
buttons to select “Channel”, then
press the ENTER
button.
Press the UP/DOWN
buttons to select “Add/Delete”.
Press the ENTER
button.
to select
Press the ENTER
“Add” or “Delete” (Pressing the
ENTER button toggles
between the two).
Press the EXIT button to exit.
Alternate method:
Use the number buttons to directly select the channel that will be added or
erased. Press the “ADD/DEL” button.
Repeatedly pressing the ENTER
button will alternate between “Add”
and “Delete”. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.
Labeling Channels
1
Press the MENU
display the menu.
button to
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Name”, then
press the ENTER
button.
2
Press the UP/DOWN
buttons to select a channel.
You can assign a name to a
channel.
Press the LEFT/RIGHT
buttons to move to “Labeling”
and use the UP/DOWN
buttons to assign a name.
The characters available:
- Letters of the alphabet (A~Z)
- Numbers (0~9)
- Special characters (space, -, *)
Repeat this procedure to enter
up to four characters.
Press the EXIT button to exit.
English-24
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 25
O P E R AT I O N
To Set-up Your Favorite Channels
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Favorite
Channel”, then press the
ENTER
button.
2
Press the UP/DOWN
buttons to select your
favorite channels to watch
among the labeled channels.
Press the ENTER
button
to add a check mark to
set the channel as a favorite
channel.
(Press the ENTER
button
again to clear the check
mark.)
Press the EXIT button to exit.
3
To select the favorite channels you have set-up, press the FAV.CH
button on the remote.
To Select Source
Use to select TV or other external input source connected to the TV.
Use to select the input source of your choice.
1
Press the MENU
button to
display the on-screen menu.
Press the ENTER
2
Press the ENTER
button.
button.
Press the UP/DOWN
buttons to select the Input
source, then press the
ENTER
button.
English-25
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 26
O P E R AT I O N
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1
Press the MENU
button to
display the on-screen menu.
Press the ENTER
to select “Input”.
button
Press the UP/DOWN
buttons to select
“Edit Name”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select
“AV”, “S-Video”,
“Component1”,
“Component2”, “DVI”, or
“PC” input jack, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to select “VCR”,
“DVD”, “Cable STB”,
“HD STB”, “Satellite STB”,
“AV Receiver”, “DVD
Receiver”, “Game",
“Camcorder”, “DVD Combo”,
“DHR (DVD HDD Recoder)”,
or “PC” input source, then
button.
press the ENTER
Press the EXIT button to
exit.
English-26
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 27
O P E R AT I O N
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and
“Custom”) that are preset at the factory. You can activate either Dynamic, Standard,
Movie, or Custom by pressing P.MODE (or by making a selection from the menu).
Or, you can select “Custom” which automatically recalls your personalized picture settings.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the ENTER
button.
Press the UP/DOWN
buttons to select the
“Dynamic”, “Standard”,
“Movie”, or “Custom”
picture setting.
Press the ENTER
button.
Press the EXIT button to exit.
Alternate method:
Simply press the P.MODE button on the remote control to select
one of the standard picture settings.
•
•
•
•
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie when viewing the movie.
Choose Custom if you want to adjust the settings according to personal
preference (see “Customizing the Picture, page 28).
English-27
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 28
O P E R AT I O N
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness,
color, and tint according to personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Custom”,
then press the ENTER
button.
If you make any changes to these
settings, the Picture Mode is
automatically switched to Custom.
3
Press the ENTER
button to select “Contrast”,
“Brightness”, “Sharpness”,
“Color”, or “Tint”.
In PC mode, only Contrast and
Brightness can be adjust in
Custom mode.
4
Press the LEFT/RIGHT
buttons to decrease or
increase the value of a
particular item.
For example, if you select
“Contrast”, pressing the RIGHT
button increases it.
Press the EXIT button to exit.
English-28
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 29
O P E R AT I O N
Using Automatic Sound Settings
Your TV has five automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”,
and “Custom”) that are preset at the factory. You can activate any of them by pressing
the S.MODE button (or by making a selection from the on-screen menu). Or, you can select
“Custom”, which automatically recalls your personalized sound settings.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
Press the ENTER
button.
2
Press the UP/DOWN
buttons repeatedly to select
the “Standard”, “Music”,
“Movie”, “Speech”, or
“Custom” sound settings.
Press the EXIT button
to exit.
Alternate method:
Simply press the S.MODE button on the remote control to select
one of the standard sound settings.
•
•
•
•
•
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movie when watching movies.
Choose Speech when watching a show that is mostly dialog (i.e. news).
Choose Custom to recall your personalized settings.
English-29
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 30
O P E R AT I O N
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Custom”, then press the
ENTER
button.
If you make any changes to these
settings, the Sound Mode is
automatically switched to Custom.
3
Press the
LEFT/RIGHT
buttons
to select a particular
frequency to be changed.
Press the
UP/DOWN
buttons to increase or
decrease the value of a
particular item.
Move
Press the EXIT button
to exit.
Note: The Custom allows you to adjust frequencies to your preference.
The lowest frequency is 100 and 10K is the highest.
English-30
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 31
Chapter Four
S P E C I A L F E AT U R E S
Selecting a Menu Language
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Language”.
Press the ENTER
button.
3
Press the UP/DOWN
buttons to select “English”,
“Français”, “Español”, or
“Português”.
Press the EXIT button
to exit.
English-31
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 32
S P E C I A L F E AT U R E S
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen”
mode to “Off”.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Blue
Screen”, then press the
ENTER
button.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off”.
3
Press the UP/DOWN
buttons to set Blue Screen
“On”.
Press the EXIT button
to exit.
English-32
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 33
S P E C I A L F E AT U R E S
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Fine
Tune”, then press the
ENTER
button.
If you do not store the fine-tuned
channel in memory, adjustments
are not saved.
3
Press the LEFT/RIGHT
buttons to adjust the fine
tuning.
4
Fine tuned channels that have
been saved are marked with an
asterisk “*”on the right-hand side
of the channel number in the
channel banner.
To store the fine tuning
setting in the TV’s
memory, press the
ENTER
button.
(To reset the fine tuning,
select “Reset” by pressing
the UP/DOWN
button
and then press the
ENTER
button.)
Press the EXIT button
to exit.
English-33
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 34
S P E C I A L F E AT U R E S
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the
same mode. For example, you cannot watch one TV channel in the main screen,
and a different one in the PIP screen. Please see ‘PIP Settings’below for details.
You can use the PIP feature to simultaneously watch two video sources.
Note: While V-Chip is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
Quick way to access
the PIP menu:
Simply press the PIP button
on the remote control.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PIP”,
then press the ENTER
button.
If you turn the TV off while
watching and turn it on again,
the PIP window will disappear.
2
Press the ENTER
button.
Press the UP/DOWN
buttons to select “On”.
Press the EXIT button
to exit.
O: PIP operates
X: PIP doesn’t operate
PIP Settings
Sub Picture
TV
AV
S-Video
COMP 1
COMP 2
DVI
PC
TV
X
X
X
O
O
O
O
AV
X
X
X
O
O
O
O
S-Video
X
X
X
O
O
O
O
COMP 1
O
O
O
X
X
X
X
COMP 2
O
O
O
X
X
X
X
DVI
O
O
O
X
X
X
X
PC
O
O
O
X
X
X
X
Main Picture
English-34
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 35
S P E C I A L F E AT U R E S
Selecting a Signal Source (External A/V) for PIP
When main picture is set to TV/AV/
S-Video, only Component1/Component2/
DVI/PC can be selected and when main
picture is set to Component1/
Component2/DVI/PC, only TV/AV/
S-Video can be selected.
3
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
Select a source of the sub
picture by pressing the
UP/DOWN
buttons and
press the ENTER
button.
Note: Source selection is possible only when Component 1,
Component 2, DVI, or PC is connected.
Swapping the Contents of the PIP and Main image
4
Press the UP/DOWN
buttons to select “Swap”,
then press the ENTER
button.
Changing the PIP Channel
5
Press the UP/DOWN
buttons to
select “Channel”, then press the
ENTER
button.
Press the UP/DOWN
buttons
to select the desired channel in the
PIP window.
Changing the Position of the PIP Window
6
MAIN: Component 1, Component 2,
DVI, PC
PIP: TV
“Channel” is inactive and not
available in TV mode. However,
they become active and available
in Component 1, Component 2, DVI, and
PC modes.
Press the UP/DOWN
buttons
to select “Position”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select the desired PIP
window position.
Changing the Size of the PIP Window
7
Press the UP/DOWN
buttons to
select “Size”, then press the
ENTER
button.
buttons to
Press the UP/DOWN
select the desired size of the PIP
window.
Press the EXIT button to exit.
• When the PC is in energy saving mode, you cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when you use the main
screen to view a game or karaoke.
• You can adjust picture position only by using the
size menu.
English-35
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 36
S P E C I A L F E AT U R E S
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with contrast,
white enhancement and 3D noise reduction.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work when
Source is in PC mode.
2
Press the UP/DOWN
buttons to select “DNIe”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “DNIe On”,
“DNIe Off ”, “DNIe Demo”,
then press the ENTER
button.
Press the EXIT button
to exit.
•
•
•
DNIe On: Improved picture mode as demonstrated by DNIe Demo is activated.
DNIe Off: The mode is deactivated and the screen returns to it’s original condition.
DNIe Demo: The screen shows the improved image on the left-hand side and
the original image on the right-hand side.
English-36
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 37
S P E C I A L F E AT U R E S
My Color Control
My Color Control allows users to adjust colors to their preference by adjusting
Pink, Blue and Green using the predefined settings (Blue, Green, Pink, Standard,
and Custom) without affecting other colors on the screen.
Easy Control
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “My Color
Control”, then press the
ENTER
button.
This function doesn’t work
when Source is in PC mode,
DNIe is set to off or
PIP is set to on.
2
Press the UP/DOWN
buttons to select “Easy
Control”, then press the
ENTER
button.
3
Press the LEFT/RIGHT
buttons to select the desired
My Color Control color, then
press the ENTER
button.
The Original picture (before
adjustment) is shown on the
left side, while the selected
mode is shown on the right.
* The sources are displayed in the following order:
Blue-Green-Pink-Standard-Custom
English-37
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 38
S P E C I A L F E AT U R E S
Detail Control
You can adjust pink, blue and
green without using the
predefined settings in custom
mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “My Color
Control”, then press the
ENTER
button.
This function doesn’t work
when the Source is in PC mode,
DNIe is set to off or
PIP is set to on.
2
Press the UP/DOWN
buttons to select
“Detail Control”, then
press the ENTER
button.
3
Press the UP/DOWN
buttons to select the desired
My Color Control color and
press the ENTER
button.
(To reset the “Detail
Control”, select “Reset” by
pressing the UP/DOWN
button and then press the
ENTER
button.)
Press the LEFT/RIGHT
buttons to increase or
decrease the value of a
particular item.
Press the EXIT button
to exit.
* The sources are displayed in the following order:
Pink-Green-Blue-Reset
English-38
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 39
S P E C I A L F E AT U R E S
Dynamic Contrast
Dynamic Contrast automatically detects the inputted visual signal and adjusts to
create optimum contrast.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work
when the Source is in PC mode,
DNIe is set to off or
PIP is set to on.
2
Press the
UP/DOWN
buttons
to select “Dynamic Contrast”,
then press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select “On”.
Press the EXIT button
to exit.
English-39
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 40
S P E C I A L F E AT U R E S
Brightness Sensor
The Brightness Sensoradjusts the screen brightness automatically by using a light
detecting sensor.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work
when the Source is in PC mode.
2
Press the UP/DOWN
buttons to select
“Brightness Sensor”,
then press the ENTER
button.
Screen brightness is
adjusted automatically depending
on the brightness of the
surrounding environment.
3
Press the LEFT/RIGHT
buttons to select “On”.
Press the EXIT button
to exit.
English-40
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 41
S P E C I A L F E AT U R E S
Changing the Screen Size
1
Press the P.SIZE button to change the screen size.
•
•
•
•
Wide
Panorama
Zoom 1, 2
4:3
Note: Only wide and size of 4:3
can be selected when the
Source is PC.
: Sets the picture to 16:9 wide mode.
: Use this mode for the wide aspect ratio of a panoramic picture.
: Magnifies the size of the picture on screen.
: Sets the picture to 4:3 normal mode.
This is the standard TV screen size.
Freezing the Picture
1
Press the STILL button to freeze a moving picture.
• Normal sound will still be heard.
Press again to cancel.
English-41
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 42
S P E C I A L F E AT U R E S
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Color Tone”,
then press the ENTER
button.
Choose from the following
Color Tone settings:
“Cool 2”, “Cool 1”,
“Normal”, “Warm 1”,
“Warm 2” according to
personal preference.
3
Press the
UP/DOWN
buttons to
select “Cool 2”, “Cool 1”,
“Normal”, “Warm 1”,
or “Warm 2”.
Press the EXIT button
to exit.
English-42
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 43
S P E C I A L F E AT U R E S
Automatic volume control
Reduces the differences in volume level among broadcasters.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Auto
Volume”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to set Auto Volume
“On”.
Press the EXIT button
to exit.
English-43
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 44
S P E C I A L F E AT U R E S
To select the WOW option
Emphasizes midrange and bass and provides a simulated surround-sound
experience.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “WOW”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “On”.
Press the ENTER
button.
Press the EXIT button
to exit.
TRADEMARK & LABEL LICENSE NOTICE
is a trademark of SRS Labs,Inc.
WOW technology is incorporated under license from SRS labs,Inc.
English-44
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 45
S P E C I A L F E AT U R E S
Special Sound Options
Choosing a Multi-Channel Sound (MTS) Soundtrack
Depending on the particular program being broadcast, you can listen to stereo,
mono, or a Separate Audio Program. (SAP audio is usually a foreign-language
translation. Sometimes SAP has unrelated information like news or weather).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “MTS”,
then press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select “Mono”, “Stereo”
or “SAP”, then press
the ENTER
button.
Press the EXIT button to
exit.
•
•
•
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are having
difficulty receiving a stereo signal.
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
You can also change the MTS setting by pressing the “MTS” button on the remote
control. (When you change channels, MTS is set to “Stereo” automatically.
To listen in “SAP” or “Mono”, change the MTS setting).
English-45
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 46
S P E C I A L F E AT U R E S
Adjusting the Headphone Sound
The headphone option is especially useful when simultaneously watching the main
screen and the PIP window.
Note: Headphones must be
purchased separately.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Headphone”, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to select the
particular item to be
changed.
4
Press the LEFT/RIGHT
buttons to decrease or
increase the value of
a particular item.
Press the EXIT button
to exit.
English-46
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 47
S P E C I A L F E AT U R E S
Selecting the Main or Sub Sound
You can select either Main or Sub when PIP is On.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Sound
Select”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to select
“Main” or “Sub”.
Select “Main” to hear
the main TV sound and
select “Sub” to hear
the PIP window sound.
Press the EXIT button
to exit.
English-47
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 48
S P E C I A L F E AT U R E S
SubWoofer
The TV provides an output for hookup to an active (powered) subwoofer.
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Sub Woofer ”, then press
the ENTER
button.
3
Press the ENTER
button.
Press the UP/DOWN
buttons to select “On”,
then press the ENTER
button.
Note: Extra subwoofer
speaker is necessary to
emphasize low-key sound.
Adjust cutoff frequency to
emphasize the lower keys.
Press the
UP/DOWN
buttons
to select the particular
item to be changed.
Press the
LEFT/RIGHT
buttons
to decrease or increase
the value of a particular
item.
Press the EXIT button
to exit.
English-48
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 49
S P E C I A L F E AT U R E S
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button).
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the ENTER
button
to select “Time”, then press
the ENTER
button to
select “Clock”.
Note: You can also set the
time using the number
buttons on the remote.
3
Press the UP/DOWN
buttons repeatedly until the
correct “Hour” appears.
After the hour is entered,
press the LEFT/RIGHT
buttons to select “Minute”.
Press the UP/DOWN
buttons until the correct
“Minute” appears.
Press the LEFT/RIGHT
buttons to select “am/pm”
and adjust with the
UP/DOWN
buttons.
Press the EXIT button to exit.
English-49
BN68-00751A-01ENG.qxd
8/7/04 6:31 PM
Page 50
S P E C I A L F E AT U R E S
Setting the On/Off Timer
Before using the timer,
you must set the TV’s clock.
(See “Setting the Clock”
on page 49)
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the ENTER
button to select “Time”.
When you set the hours,
make sure the correct time
of day (am or pm) appears
to the right of the time.
2
Press the UP/DOWN
buttons to select
“On Timer”, then press the
ENTER
button.
Press the UP/DOWN
buttons repeatedly to
select the appropriate “Hour”.
Press the LEFT/RIGHT
buttons to select “Minute”
Press the UP/DOWN
buttons repeatedly to
select the appropriate
“Minute”.
Press the LEFT/RIGHT
buttons to select “am/pm”
Press the
UP/DOWN
buttons to
select “am” or “pm”.
Press the LEFT/RIGHT
buttons to select “Channel”
Press the UP/DOWN
buttons repeatedly to
select the appropriate
“Channel”.
Press the LEFT/RIGHT
buttons to select “Volume”
Press the UP/DOWN
buttons repeatedly to
select the appropriate
“Volume”.
(i.e. the time when the TV
will turn on).
English-50
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 51
S P E C I A L F E AT U R E S
To deactivate the “On Timer,”
select “Off” during this step.
3
Press the LEFT/RIGHT
buttons to select “Setup”.
Press the
UP/DOWN
buttons to
set the On Time “On”.
(Repeatedly pressing
the UP/DOWN
buttons will alternate
between On and Off).
When finished, press the
ENTER
button.
Note: You can also set the
time using the number
buttons on the remote.
4
To set the Off time,
press the UP/DOWN
buttons to select
“Off Timer”.
Press the ENTER
button and set the hours
and minutes. (Follow the
same procedure as in
steps 2 and 3 above).
5
When finished setting the timer, press the EXIT button to exit.
•
Auto Power Off
When you set the timer on, your television will be turned
off if you do not operate any controls for 3 hours after
the TV has been turned on with the ‘Timer On’ function.
‘Auto power off’ operates only when the TV has been
turned on by the ‘Timer on’ function.
English-51
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 52
S P E C I A L F E AT U R E S
Setting the Sleep Timer
Set the timer for the TV to turn off at the preset time automatically.
Sleep timer
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the ENTER
button to select “Time”.
2
Press the
UP/DOWN
buttons
to select “Sleep Timer”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
repeatedly until the
correct time appears.
Press the EXIT button
to exit.
•
Easy Way to Set the Sleep Timer
Press the
button on the remote.
The number on the screen changes from
Off • 30 • 60 • 90 • 120 • 150 • 180
English-52
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 53
S P E C I A L F E AT U R E S
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded
video tapes also provide closed captions. Most pre-recorded commercial video tapes provide
closed captions as well. Check for the closed caption symbol in your television schedule and
on the tape’s packaging:
.
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Caption”,
then press the ENTER
button.
Misspellings and unusual
3characters sometimes occur during
closed
Press
thecaption
ENTERtransmissions, especially
those of live events. There may be a
button.
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.
In caption mode, captions
appear
4 at the bottom of the screen,
and
theythe
usually
cover only a small
Press
UP/DOWN
portion
buttonsoftothe
setpicture.
the Caption
“On”, then press the
InENTER
text mode,
information unrelated
button.
to the program, such as news or
weather, is displayed. Text often
covers a large portion of the screen.
5
Depending on the particular broadcast, it might be
necessary to alter the settings to “Channel” and “Field”.
English-53
Different channels and fields
display different information:
Field 2 carries additional
information that supplements
the information in Field 1.
(For example, Channel 1 may
have subtitles in English, while
Channel 2 has subtitles
in Spanish).
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 54
S P E C I A L F E AT U R E S
6
Press the UP/DOWN
buttons to select “Mode”,
then press the ENTER
button.
Press the UP/DOWN
buttons to set “Caption” or
“Text”, then press the
ENTER
button.
7
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “1” or “2”,
then press the ENTER
button.
8
Press the UP/DOWN
buttons to select “Field”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “1” or “2”,
then press the ENTER
button.
Press the EXIT button to
exit.
English-54
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 55
S P E C I A L F E AT U R E S
Using the V-Chip
The V-Chip feature automatically locks out programming that is deemed inappropriate for
children. The user must first enter a PIN (personal ID number) before any of the V-Chip
restrictions can be set up or changed.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
3
The “Enter PIN” screen
will appear. Enter your
4-digit PIN number.
Note: The default PIN
number for a new TV
set is “0-0-0-0.”
4
After entering a valid
PIN number, the
“V-Chip” screen will
appear. Press the
UP/DOWN
buttons
to select “Change PIN”.
Note: If you forget the PIN,
press the remote-control
buttons (with the unit “Off”)
in the following
sequence,which resets the
PIN to 0-0-0-0:
POWER OFF ➔ MUTE ➔
8 ➔ 2 ➔ 4 ➔ POWER ON.
5
Press the ENTER
button.
The Change PIN screen
will appear. Choose any
4-digits for your PIN and
enter them.
As soon as the 4 digits
are entered, the “Confirm
New PIN” screen appears.
Re-enter the same 4 digits.
When the Confirm screen
disappears, your PIN has
been memorized.
Press the EXIT button to
exit.
English-55
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 56
S P E C I A L F E AT U R E S
How to Enable/Disable the V-Chip
Note: PIP operation is disabled when the V-chip is on.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
3
The “Enter PIN” screen
will appear. Enter your
4-digit PIN number.
Note: The default PIN
number for a new TV
set is “0-0-0-0.”
4
The “V-Chip” screen will
appear, and “V-Chip
Lock” will be selected.
To enable the V-Chip
feature, press the
UP/DOWN
buttons
so that the “V-Chip
Lock” is set to “On”.
Press the EXIT button
to exit.
English-56
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 57
S P E C I A L F E AT U R E S
How to Set up Restrictions Using the ‘TV Parental Guidelines’
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two methods:
The TV guidelines or the MPAA rating.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
The “Enter PIN” screen
will appear. Enter your
4-digit PIN number.
Note: The default PIN
number for a new TV
set is “0-0-0-0.”
3
Press the
UP/DOWN
buttons to
select “TV Parental
Guidelines”, then press
the ENTER
button.
Note: These categories consist of
two separate groups: TV-Y and
TV-Y7 (young children through
age 7), and TV-G through TV-MA
(everybody else).
The restrictions for these two
groups work independently:
If a household includes very young
children as well as young adults,
the TV guidelines must be set up
separately for each age group.
(See next step.)
4
The “TV Parental Guidelines”
screen will appear.
Press the UP/DOWN
buttons to select one of
the six age-based categories:
TV-Y Young children
TV-Y7 Children 7 and over
------------------------------TV-G General audience
TV-PG Parental guidance
TV-14 Viewers 14 and over
TV-MA Mature audience
English-57
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 58
S P E C I A L F E AT U R E S
5
At this point, one of the TV-Ratings is selected.
Depending on your existing setup, the letter “U” or “B” will be highlighted (changed to yellow).
(U= Unblocked, B= Blocked)
When the “U” or “B” is highlighted, press the ENTER
button to block or unblock the category.
To select a different TV-Rating, press the UP/DOWN
To EXIT this screen, press the MENU
buttons and then repeat the process.
buttons again.
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.
See the next step to change any of the following sub-ratings:
FV: Fantasy Violence
D : Sexual suggestive Dialog
L : Adult Language
S : Sexual situation
V : Violence
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.”
For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then all the categories in the “young adult”
group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V)
work together similarly. (See next section.)
6
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous
page).
Next, while the TV-Rating is selected, repeatedly press the LEFT or RIGHT buttons.
This will cycle through the available sub-ratings (FV,L, S, D or V).
A highlighted letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is
button to change the sub-rating.
highlighted, press the ENTER
Press the MENU
buttons once to save the TV guidelines.
To select a different TV-Rating, press the UP/DOWN
To exit this screen, press the MENU
buttons and then repeat the process.
buttons once again.
Note: The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block the “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14
andTV-MA will automatically be blocked.
7
Press the MENU
button to clear all the screens.
(Or proceed to the next section, and set up additional restrictions based on the MPAA codes).
English-58
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 59
S P E C I A L F E AT U R E S
How to Set up Restrictions Using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded
with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “V-Chip”,
then press the ENTER
button.
2
The “Enter PIN” screen
will appear. Enter your
4-digit PIN number.
Note: The default PIN
number for a new TV
set is “0-0-0-0.”
3
Press the UP/DOWN
buttons to select “MPAA
rating”, then press the
ENTER
button.
English-59
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 60
S P E C I A L F E AT U R E S
4
Repeatedly press the
UP/DOWN
buttons
to select a particular
MPAA category. (When a
category is selected, its
color changes to yellow.)
G
General audience (no restrictions).
PG
Parental guidance suggested.
PG-13 PG-13 (Parents strongly cautioned).
R
R (Restricted. Children under 17
should be accompanied by an adult).
NC-17 No children under age 17.
X
X (Adults only).
NR
Not rated.
Press the ENTER button to select “U” or “B”.
Press the MENU button four times to save the settings and to clear all screens.
Note: The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R” , “NC-17” and “X” will
automatically be blocked also.
How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and
the following message will appear: “Excessive rating”.
To resume normal viewing, tune to a different channel using the number buttons. Under certain
conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the
channels.
button for an “emergency escape”:
In this case, use the MENU
Select the V-Chip on the Menu. Enter your PIN number, and press the ENTER
button to
temporarily disable the V-Chip Lock.
English-60
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 61
S P E C I A L F E AT U R E S
Color Weakness
This feature enables those with a color weakness to view images as those with normal
color vision do.
The feature provides nine different color adjustment layers for red, green and blue.
1
Press the MENU
button to
display the on-screen menu.
Press the UP/DOWN
buttons to select “Setup”, then
press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Color Weakness”, then press
the ENTER
button.
This function doesn’t work
when the Source is in PC mode,
or DNIe is set to off.
3
Press the ENTER
button and then press the
UP/DOWN
buttons
to select “On”, then press the
ENTER button.
4
Press the UP/DOWN
buttons to select
“Red”, “Green”, “Blue”.
Press the LEFT/RIGHT
buttons to decrease or increase
the value of a particular item.
Press the EXIT button to exit.
English-61
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 62
S P E C I A L F E AT U R E S
Selecting the Melody
You can hear a melody sound when the television is powered on or off.
1
Press the MENU
button
to display the on-screen
menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Melody”, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to select
“On”.
Press the EXIT button
to exit.
English-62
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 63
Chapter Five
PC D I S P L AY
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. However, even if your actual screens look different, the same basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Control Panel” on the Windows start
menu.
2
When the control panel window appears,
click on “Appearance and Themes” and
a display dialog-box will appear.
3
4
When the control panel window appears,
click on “Display” and a display
dialog-box will appear.
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
LN-P267W: 1280 x 768 pixels
LN-P327W: 1360 x 768 pixels
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
* See “Display Modes” on page 73.
English-63
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 64
PC D I S P L AY
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals
the monitor receives. The function also automatically fine-tunes the settings and adjusts
the frequency values and positions.
Press the PC button on the remote control to select the PC mode.
Note: This function does not work in DVI-Digital mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“PC”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Auto Adjustment”,
then press the ENTER
button.
English-64
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 65
PC D I S P L AY
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“PC” then press the
ENTER
button.
2
Press the ENTER
button to select
“Image Lock”.
3
Press the UP/DOWN
buttons to select
“Coarse” or “Fine”,
then press the
ENTER
button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality. Vertial
stripes may appear or
the picture may be blurry.
<Adjusting Coarse>
Press the EXIT button to
exit.
<Adjusting Fine>
English-65
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 66
PC D I S P L AY
Changing the Screen Position
Press the PC button on the remote control to select the PC mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“PC”, then press
the ENTER
button.
Press the UP/DOWN
buttons to select
“Position”, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to adjust
the V-Position.
Press the LEFT/RIGHT
buttons to adjust
the H-Position.
Press the EXIT button
to exit.
English-66
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 67
PC D I S P L AY
Initializing the Screen Position or Color Settings
Press the PC button on the remote control to select the PC mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“PC”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Image Reset”, then press
the ENTER
button.
Press the EXIT button
to exit.
English-67
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 68
Chapter Six
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Identifying Problems
Problem
Poor picture
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low First, check the volume of units connected to your TV
at maximum volume.
(digital broadcasting receiver, DTV, DVD, cable
broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Picture rolls vertically.
Check all wire connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it
again.
Make sure the wall outlet is working.
The TV won’t turn on.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control
(transmission window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the
“Check signal cable”
PC sources.
message.
Check the maximum resolution and the frequency of
“Not Supported Mode”
the Video Adapter.
message.
Compare these values with the data in the Display
Modes.
English-68
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 69
TROUBLESHOOTING
Problem
The image is too light or too
dark.
Horizontal bars appear to
flicker, jitter or shimmer on
the image.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Screen is black and power
indicator light blinks steadily.
Image is not stable and may
appear to vibrate.
Possible Solution
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine
tuning.
Adjust the Coarse tuning and then adjust the Fine
tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the
keyboard.
If the setting is not correct, use your computer utility
program to change the display settings.
NOTE: Your TV supports multiscan display functions
within the following frequency domain:
26” (LN-P267W)
32” (LN-P327W)
Horizontal frequency (kHz)
30~68
30~61
Vertical frequency (Hz)
56~85
56~75
Maximum refresh rate
(at 60Hz)
1280x768
1360x768
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output
source (i.e. STB) with a digital signal.
If a still image is displayed for When you need to leave the monitor
an extended period of time,
unused for an extended period of time, adjust
residual images or blurring
the settings so that the monitor automatically
may appear.
goes into energy saving mode or activates the
screen saver to display moving images.
TFT LCD panel manufactured by using advanced semiconductor technology with
precision of 1ppm(one millionth) above is used for this product. This is not from bad
quality and you can use it without uneasiness. For example, the number of TFT LCD
sub pixels: 26inch - 2,949,120, 32inch - 3,133,440
English-69
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 70
APPENDIX
Installing the Wall Mount Kit
Note: This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
Wall-Bracket
Set-Bracket
Screw: 8EA
Wood Screw: 4EA
Anchor: 4EA
How to assemble the Wall Mount Bracket
1
2
3
Mark the location of hole on the wall.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket .
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and secure the screws
Insert three Hangers of the set-bracket into the grooves of the wall-bracket
Fix set-bracket and wall-bracket with screws .
English-70
.
.
Installation Guide
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 71
APPENDIX
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may
differ from the illustration depending on the manufacturer. Please refer to the manual provided
with the Kensington lock for proper use.
Cable
Figure 2
Figure 1
<Optional>
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in
the locking direction (Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the
different television systems that are in use around the world. A TV designed for one
system may not work properly with another system due to differences in the TV channel
frequencies.
English-71
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 72
APPENDIX
Specifications
LN-P267W
LN-P327W
Viewing Angle
26” Diagonal
21.91 (H) X 13.38 (V) inches
(556.4 (H) X 339.84 (V) mm)
a-si TFT active matrix
0.0174 (H) X 0.0174 (V) inches
(0.4425 (H) X 0.4425 (V) mm)
170/170 (H/V)
32” Diagonal
27.06 (H) X 16.24 (V) inchrs
(687.3 (H) X 412.42 (V) mm)
a-si TFT active matrix
0.021 (H) X 0.021 (V) inches
(0.537 (H) X 0.537 (V) mm)
170/170 (H/V)
*Frequency
Horizontal
Vertical
Display Color
30 ~ 68 kHz
56 ~ 85 Hz
16,194,277 colors
30 ~ 61 kHz
56 ~ 75 Hz
16,777,216 colors
1280 x 768 @ 60 Hz
1366 x 768 @ 60 Hz
Model
Planel
Size
Display Size
Type
Pixel Pitch
Display Resolution
Maximum Mode
Input Signal
Sync Signal
Video Signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
Video
Color System
Video System
NTSC
CVBS, S-VHS
Component
Video In
Audio In
1.0 Vp-p @ 75 ohm
500mVrms
Power Supply
Input
AC 120V~ 60 Hz
Power Consumption
Normal
Power Saving
Dimensions
Unit (WxDxH): body
With Stand (WxDxH)
130 W
< 5.0 W
160 W
< 5.0 W
32.56 X 4.43 X 19.86 inches
(827 X 112.5 X 504.5 mm)
32.56 X 10.94 X 20.47 inches
(827 X 278 X 520 mm)
38.27 X 4.57 X 22.24 inches
(972 X 116 X 565 mm)
38.27 X 12.48 X 22.74 inches
(972 X 317 X 577.5 mm)
39.68 lbs (18.0 kg)
47.40 lbs (21.5 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input 1
Audio Input 2
Headphone Out
Frequency
Response
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output (3.5ø Stereo Jack 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at - 3dB)
* Referring to Display Modes, page 73.
English-72
BN68-00751A-01ENG.qxd
8/7/04 6:32 PM
Page 73
APPENDIX
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal the standard signal mode,
adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during
manufacture.
Mode
Macintosh
IBM
VESA
GTF
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
640 X 480
35.000
66.667
30.240
-/-
832 X 624
49.726
74.551
49.500
+/+
640 X 480
31.496
59.940
25.175
-/-
720 X 400
31.469
70.087
28.322
-/-
640 X 480
37.861
72.809
31.500
-/-
640 X 480
37.500
75.000
31.500
-/-
800 X 600
37.879
60.317
40.000
+/+
800 X 600
48.077
72.188
50.000
+/+
800 X 600
46.875
75.000
49.500
+/+
1024 X 768
48.363
60.004
65.000
-/-
1024 X 768
56.476
70.069
75.000
-/-
1360 X 768
47.712
60.015
85.800
+/+
1280 X 768
47.700
60.000
80.136
-/+
* 1360 X 768 mode supported only in LN-P327W.
* 1280 X 768 mode supported only in LN-P267W.
English-73