roast-n-hold™ gentle convection oven model co-151-h

JOB:
®
ITEM NO:
ROAST-N-HOLD™
GENTLE CONVECTION OVEN
MODEL CO-151-H-189 (HALF SIZE)
FEATURES AND BENEFITS:
• Fully insulated half size Roast-N-Hold gentle convection
• oven designed for flavorful results by slow roasting.
• Slow convected air system promotes natural browning
• for flavor and seals in natural juices. Slow roasting means
• 15% to 20% less shrinkage.
• Efficient 4700 Watt power unit allows for rethermalizing
• of prepared meals or bulk items. Maximum temperature
• 350˚F. (176.5˚C.). Also available with 2000 Watt power
• unit; maximum temperature 250˚F. (121˚C.).
• Pre-setting automatic controls for roasting and holding cycles
• allows for unattended operation 24 hours a day.
• Roast and hold over 120 lbs. (54 kg.) of meat in just 6 sq. ft.
• of floor space.
• Non-venting oven, permitted by most local codes, provides
• easy, inexpensive installation.
• Self-contained power top lifts off for ease of maintenance;
• available to suit your power requirements.
• 304 stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/grease buildup.
• Field reversible insulated door prevents temperature loss.•
• Silicone door gasket for proper seal. High temperature • •
• ceramic magnetic latch for “easy open” and security during
• transport. Latch and hinges mounted inboard.
• Standard with right hand hinging; left hand hinging
• available upon request.
• Channel pan slides securely hold 18" x 26" pans on 3” centers
• without tipping. Provides added strength. Supplied with three
• raised wire grids.
• Heavy duty 5" swivel casters, two with brakes. Provides
• mobility when fully loaded.
• Ovens can be stacked for flexibility.
• Free cooking manual and operation manual provided
• with the purchase of any Roast-N-Hold Oven.
POWER UNIT OPTIONS:
• 4700 Watts, 208 Volts, 1 Phase, 60 Hz.
• 4700 Watts, 240 Volts, 1 Phase, 60 Hz.
• 4700 Watts, 208 Volts, 3 Phase, 60 Hz.
• 4700 Watts, 240 Volts, 3 Phase, 60 Hz.
Probe Power Unit Available at Extra Cost (see page E-6)
CO-151-H-189
®
®
C
®
ACCESSORIES and OPTIONS
(Available at extra cost):
❏ Stacking Kit
❏ Security Panel for Controls
❏ Tempered Glass Door Window
❏ Push Handle
❏ Key Lock Latch
❏ Extra Wire Grids
❏ Perimeter Bumper
❏ Corner Bumpers
❏ Floor Lock (for use with 5” casters)
❏ Various Caster Options
❏ 50 Cycle Service
❏ See page E-10 for accessory details.
®
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-4
Dec., 1998
CO-151-H-189
CRES-COR
PAN
MODEL NO.
CAP
CO-151-H-189
9
SIZE
DIM “A”
DIM “B”
DIM “C”
INSIDE DIMENSIONS
WIDTH
DEPTH
HEIGHT
WIDTH
DEPTH
HEIGHT
WEIGHT
ACT.
18 X 26
IN
25-3/8
36-3/4
43-3/8
18-1/4
26-15/16
27-1/2
LBS
210
45.7 X 66.0
CM
64.5
93.3
110.2
46.4
68.4
69.9
KG
95
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CABINET:
POWER UNIT COMPONENTS: (refer to above drawing)
• Body: 22 ga. 304 stainless steel.
• Reinforcement: Internal framework of 16 ga. 304 stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
• 75˚F. 1-1/2” in back wall, door, base; 2” in side walls.
• Air tunnel: 20 ga. 304 stainless steel, lift-out type, mounted
• on back panel.
• Body: Formed 20 ga. 304 stainless steel with black control
• panel, recessed and tilted 5˚.
A) Thermostat (holding): Solid state, room ambient to 250˚F. (121˚C.).
B) Thermostat (cook/retherm): Solid state, room ambient to 350˚F.
B) (176.5˚C.).
C) Pilot lights (2).
D) Switch: Lighted ON-OFF rocker type.
E) Timer: 24 hr. digital countdown; infinite memory retention.
F) Thermometer.
• Power cord: Permanent, 6 ft., 10/3 ga. with right angle plug.
• Heaters (3): 1470 Watts each.
• Blower motors (3).
• Vent fans (2).
• Fuses (2): 3 Amp.
BASE:
• One piece construction, .190 aluminum.
• Casters: 5" dia., swivel, neoprene tires, 1-1/4 wide, load cap.
• 200 lbs. each, temp. range -20˚/+160˚F. Bearings are sealed
• and permanently lubricated. Front casters equipped with brakes.
DOOR:
• Field reversible.
• Formed 22 ga. 304 stainless steel.
• Latch: Chrome plated steel, high temperature ceramic
• magnetic type; mounted inboard.
• Hinges: Heavy duty chrome plated steel, lift-off type; mounted
• inboard.
• Gasket: Perimeter type, silicone.
• Pan stop channel: Attached to inside of door.
PAN SLIDES:
• 18 ga. 304 stainless steel channels on 3" centers.
• Grids (3): Nickel chrome plated steel, raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE:
• 4700 Watts, 208 Volts, 60 Hz., single phase, 22.6 Amps.,
• 30 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., single phase, 19.6 Amps.,
• 30 Amp. service.
• 4700 Watts, 208 Volts, 60 Hz., three phase, 13 Amps.,
• 20 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., three phase, 11.3 Amps.,
• 20 Amp. service.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
SHORT FORM SPECIFICATIONS
Cres-Cor Roast-N-Hold Half Size Convection Oven
Model CO-151-H-189. Removable power unit 20 ga. 304
stainless steel, recessed control panel. Cabinet and door
22 ga. 304 stainless steel; stainless steel internal frame;
coved corner interior. Fiberglass insulation in sides 2”;
back, door and base 1-1/2”. High temperature magnetic
latch, heavy duty hinges. No-tip channel interior for
18" x 26" pans on 3" centers. One piece base
.190 aluminum. 5" swivel neoprene casters, permanently
lubricated, sealed ball bearings. Load capacity 200 lbs.
each.
Watts,
Volts,
Hz.,
Phase. 2 year parts warranty. Provide the
following accessories:
.
NSF, UL, CUL listed.
®
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 1998 All rights reserved.
In line with its policy to continually improve its products,
CRES-COR reserves the right to change materials and
specifications without notice.
Litho in U.S.A.