Ryvyr M-KENT-24WW Installation Guide

INSTALLATION INSTRUCTIONS
TM
KENT
TM
MIRROR
M-KENT-24DK / M-KENT-24WT
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any
installation problems, please don’t hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new product and inspect for
damage.
The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply.
SUGGESTED TOOLS AND MATERIALS
10'
Philips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
ROUGH-IN DIMENSIONS
Rev 3/07
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
MIRROR INSTALLATION
1
Finished Wall
2
CARE AND CLEANING
• Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft dry cloth. When cleaning the mirror, spray the
mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.
Rev 3/07
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time