Designed for the well-lived home.
High-Speed Oven
E30SO75FPS professional series
30" HIGH-SPEED OVEN
Oven Cavity
Watts (IEC-705 Test Procedure)
Oven Interior
Interior Light
Porcelain Enamel Turntable Diameter
1.1 Cu. Ft.
1000
Stainless Steel
Yes
13"
CONTROL PANEL FEATURES
Electronic Clock & Timer
Glass Wave-Touch™ Control with Blue LED Display
Automatic Settings –
Basic Cook
Recipes
Microwave Options
Speed Bake
Speed Roast
Speed Grill
Convection
Yes
Yes
84
100
17
Yes
Yes
Yes
Yes
POWER RATINGS
Microwave (kW / Amps)
Convection (kW / Amps)
Speed Cooking (kW / Amps)
Voltage Rating
Connected Load (kW Rating) @ 240 Volts
1.7 / 7.5
3.1 / 13
3.2 / 13.5
240V /60 Hz /15 or 20A
3.3
ACCESSORIES
Cookbook
High and Low Racks
Pizza Pan
Easy Reference Guide
Practical, Complementary Design
SPECIFICATIONS
Stainless steel exterior, sturdy handle on the
pull-down door for easy opening and increased
placement options.
Oven Cavity Dimensions –
Height
Width
Depth
Overall Exterior Dimensions –
Height
Width
Depth
Power Supply Location
Approved for Under-Counter Installation
Approved for Single Oven Combination Installation*
Product Weight
Shipping Weight (Approx.)
Wave-Touch™ Control Panel Technology
A simple touch, anywhere on the panel, lights
oven controls and provides access to all oven
functions. This allows easy programming
while keeping activated functions lighted for
easy monitoring.
Included
Included
Included
Included
9"
16"
13-1/2"
22-7/8"
30"
23-5/8"
Left Bottom Rear
No
Yes
115 Lbs.
119 Lbs.
*Approved to be used in combination with any Electrolux ICON™ Single Wall Oven
and/or Warmer Drawer.
NOTE: Always consult local and / or national electric codes. Refer to Product Installation
Guide for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
Cooking Mode Options
This appliance makes cooking faster, easier and
better by combining a high-speed, convection
and microwave oven into one versatile package.
This high-performance oven allows you to bake,
brown, grill or roast with ease.
High-Speed Cooking Option
Forcing heated air at ultrahigh speeds over the
surface of meats, High-Speed Cooking rapidly
sears in moisture and flavor and produces a
beautifully browned, delicately crisp exterior.
When combined with the microwave function,
cooking time is reduced by 50%.
electroluxicon.com
High-Speed Oven
E30SO75FPS professional series
24" min.
CL
Power supply location
(left bottom rear)
21 1/4"
30"
30" min.
20 1/4"
21 3/8"
min.
21 7/8"
max.
11
/16"
22 7/8"
22 3/8" min.
22 7/8" max.
16 3/4"
21 7/32"
2" (visible
gap)**
Allow at least
12" clearance
for door depth
when open
23 5/8"
5
/8 "
36" min.
required
distance
to floor
22 3/4"*
(critical
dimension)
Full base
required
to support
150 lbs.
240V/60Hz
grounded
electrical
outlet should
NOT be located
within shaded
area
*Critical
dimension –
MUST be
applied
**When used in combination with another
Electrolux ICON™ built-in product, a minimum
clearance of 2 5/8" required from bottom of
High-Speed Oven cutout to top edge of
companion product’s faceplate, leaving a 2"
visible gap between both product faceplates
30" High-Speed Oven Specifications
• Product
Weight – 115 Lbs.
Rating – 240V / 60 Hz / 15 or 20 Amps
• Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
• Connected Load (kW Rating) @ 240 Volts = 3.3 kW
• Amps @ 240 Volts = 13.2 Amps
• Oven has a 6-15 plug, requiring a 6-15 receptacle.
• Always consult local and /or national electric codes.
• Allow at least 12" clearance for oven door depth when open.
• Minimum 22-3/4" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
• Voltage
• Full
oven base of solid plywood or similar material required, capable of
supporting 150 Lbs.
• Base must be level and cabinet front must be square.
• High-Speed Oven is NOT approved to be used under counter.
• High-Speed Oven can be built in alone or is approved to be used in
combination with any Electrolux ICON™ Single Wall Oven and / or Warmer
Drawer. (Refer to Combination Installation Specification pages on web.)
• When used in combination with another Electrolux ICON™ built-in
product, a minimum clearance of 2-5/8" required from bottom of
High-Speed Oven cutout to top edge of companion product’s faceplate,
leaving a 2" visible gap between both product faceplates.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca
E30SO75FPS 03/08
© 2008 Electrolux Home Products, Inc.
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.
High-Speed Oven/Electric Single Wall Oven
Combination Installation
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
24" min.
30" min.
240V/60 Hz
grounded electrical
outlet should NOT
be located within
shaded area
20 1/4"
E30SO75FPS
E30SO75ESS
High-Speed
Oven Cutout
21 11/16" min.
22 3/16" max.
2"
(visible
gap)*
E30EW75GPS
E30EW75GSS
Electric Single
Wall Oven Cutout
28 1/2" min.
28 7/8" max.
3
16 /4"
22 3/8" min.
22 7/8" max.
Full plywood base
required to support
150 lbs.
CL
24" min.**
(critical
dimension)
28 1/2" min.
29" max.
4"x 4" opening
to route armoured
cable
Full base required
to support 200 lbs.
* Minimum 2 5/8"
clearance required
from bottom of
Built-In High-Speed
Oven cutout to top
edge of Wall Oven’s
faceplate, leaving
a 2" visible gap
between both product
faceplates
** Critical dimension –
MUST be applied
31"
suggested
distance
4 1/2"
min.
required
3" max.
2" min.
Electrical junction
box location
Bottom cutout
edge must be
finish cut
High-Speed Oven / Electric Single Wall Oven
Combination Installation Specifications
30" High-Speed Ovens Specifications
• Always
• Voltage
• Product
consult local and /or national electric codes.
(Refer to product-specific electrical specifications on this page.)
• Minimum 24"deep cutout dimension is critical for proper combination
installation, to ensure that each built-in product’s faceplate will fit
flush against cabinet front.
• Bases must be level and cabinet front must be square.
• Minimum 4-1/2" required distance from bottom of Wall Oven cutout
to floor, 31" suggested.
• Respect critical dimensions as noted for proper installation of built-In
products.
• Minimum 23-1/4" clearance needed for Wall Oven door depth
when open.
Weights – (E30SO75FPS / E30SO75ESS) 115 Lbs.
Rating – 240V / 60 Hz / 15 or 20 Amps
• Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only
electrical supply with ground required on separate circuit fused on
both sides of line.
• Connected Load (kW Rating) @ 240 Volts = 3.3 kW
• Amps @ 240 Volts = 13.2 Amps
• Full base of solid plywood or similar material required, capable of
supporting 150 Lbs.
• Minimum 2-5/8" clearance required from bottom of High-Speed Oven
cutout to top edge of Wall Oven’s faceplate, leaving a 2" visible gap
between both product faceplates.
30" Electric Single Wall Ovens Specifications
• Product
Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
• Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW
• Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps
• Full oven base of solid plywood or similar material required, capable of
supporting 200 Lbs.
• Single
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca
SO_EW INST 03/08
© 2008 Electrolux Home Products, Inc.
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.
High-Speed Oven/Electric Single Wall Oven/
Warmer Drawer Combination Installation
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
24" min.
30" min.
240V/60 Hz
grounded electrical
outlet should NOT
be located within
shaded area
20 1/4"
E30SO75FPS
E30SO75ESS
High-Speed
Oven Cutout
21 11/16" min.
22 3/16" max.
2"
(visible
gap)*
E30EW75GPS
E30EW75GSS
Electric Single
Wall Oven Cutout
E30WD75GPS
E30WD75GSS
E30WD75GTT
Warmer Drawer
Cutout
28 1/2" min.
28 7/8" max.
3
16 /4"
22 3/8" min.
22 7/8" max.
28 1/2" min.
29" max.
CL
24" min.**
(critical
dimension)
Two 3" wide
by 3/4" thick
planks must be
installed, capable
of supporting
200 lbs.
Bottom of
oven cutout
11 5/8" min.**
(critical
dimension)
13/4" min.†
9 7/8" min.
10 1/4" max.
41/2" min.
required
Full plywood base
required to support
150 lbs.
* Minimum 2 5/8"
clearance required
from bottom of
Built-In High-Speed
Oven cutout to top
edge of Wall Oven’s
faceplate, leaving
a 2" visible gap
between both product
faceplates
** Critical dimension –
MUST be applied
† Maximum height
depends on critical
dimension (11 5/8")
†† Electrical junction
box for Wall Oven
must be lower than
the Warmer Drawer
cutout
28 1/2" min.
29" max.
3"max.††
Electrical junction
box location
4"x 4" opening to route
armoured cable
Full plywood base
required to support
100 lbs.
High-Speed Oven / Electric Single Wall Oven / Warmer Drawer
Combination Installation Specifications
30" Electric Single Wall Ovens Specifications
• Always
• Single
consult local and /or national electric codes.
(Refer to product-specific electrical specifications on this page.)
• Minimum 24"deep cutout dimension is critical for proper combination
installation, to ensure that each built-in product’s faceplate will fit
flush against cabinet front.
• Bases must be level and cabinet front must be square.
• Minimum 4-1/2" required distance from bottom of Warmer Drawer
cutout to floor.
• Respect critical dimensions as noted for proper installation of built-In
products.
• Minimum 23-1/4" clearance needed for Wall Oven door depth
when open.
30" High-Speed Ovens Specifications
• Product
Weights – (E30SO75FPS / E30SO75ESS) 115 Lbs.
Rating – 240V / 60 Hz / 15 or 20 Amps
• Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
• Connected Load (kW Rating) @ 240 Volts = 3.3 kW
• Amps @ 240 Volts = 13.2 Amps
• Full base of solid plywood or similar material required, capable of
supporting 150 Lbs.
• Minimum 2-5/8" clearance required from bottom of High-Speed Oven
cutout to top edge of Wall Oven’s faceplate, leaving a 2" visible gap
between both product faceplates.
• Voltage
• Product
Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
• Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW
• Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps
• To support Wall Oven, two 3"-wide x 3/4" thick planks must be installed
as a base, capable of supporting 200 Lbs. Do NOT use full base, since
planks are necessary to allow for proper air displacement.
30" Warmer Drawers Specifications
• Product
Weights – (E30WD75GPS / E30WD75GSS) 49 Lbs. /
(E30WD75GTT) 41 Lbs.
• Voltage Rating – 120V / 450W / 60 Hz / 15 Amps
• Connected Load (kW Rating) @ 120 Volts = 0.45 kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
• Amps @ 120V = 3.75 Amps
• Full base of solid plywood or similar material required, capable of
supporting 100 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca
SO_EW_WD INST 03/08
© 2008 Electrolux Home Products, Inc.
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.