Architectural Mailboxes 7507B Installation Guide

Add to my manuals
1 Pages

advertisement

Architectural Mailboxes 7507B Installation Guide | Manualzz

Decorative Post Cover (Model 7506)

Assembly Instructions

Thank you for purchasing this premium mailbox accessory item. We know you’ll be satisfied with the years of service it will provide. If you have any questions about how to mount or use this post, or if you need any replacement parts, please call us directly at (800) 464-7491 or contact us at www.architecturalmailboxes.com.

This product is for use with the 3” Round Post (item 7505) only.

Tools

Phillips head screwdriver

(not included)

Hardware screws x 4 pads x 4

1

Install the 3” Round Post (item 7505) as described in the instructions that came with the post. The Decorative Post Cover is attached after the Post is installed.

2

Optional: If desired, attach the self-adhesive rubber pads to the cover or to the post where the two parts meet to prevent rattling or rubbing.

Attach the Decorative Post Cover to the post as shown using the 4 screws. Make sure to partially screw in all screws before tightening them to help align the two halves of the post cover. DO NOT twist or move the cover on the post after it is tightened - this may scratch the post.

This step can be performed before or after the mailbox is attached to the top of the post.

The Decorative Post Cover rests against the ground and does not require any further attachment to the post or any other part.

Rev. B

A RCHITECTURAL M AILBOXES www.architecturalmailboxes.com (800) 464-7491 © 2006, Architectural Mailboxes

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement