Quick Installation Guide: VideoJet 8008 / VideoJet 8004

VideoJet 8008 / VideoJet 8004
EN | 2
Quick Installation Guide | VideoJet 8008 / VideoJet 8004
Warning
You should always make yourself familiar with the safety measures in
the corresponding chapter of the user's manual. You will find important details on the
installation and on the operation of the unit in the user's manual. The instructions in
this "Quick Installation Guide" show only the basic installation of a VideoJet 8008 or
VideoJet 8004; they are no substitute for the complete user's manual.
The instructions in this "Quick Installation Guide" refer to the units VideoJet 8008 and
VideoJet 8004, both in basic and in audio version. The title page shows a VideoJet 8008. In the
drawings, the VideoJet 8008 displayed in the audio version stands for all versions.
Bosch Security Systems | 2005-12 | V1.5
VideoJet 8008 / VideoJet 8004 | Quick Installation Guide
Contents of Delivery
• VideoJet 8008 (or VideoJet 8004) Network Video Server, basic version or audio version
• Power supply cable
• Configuration cable
• Mounting kit for installation in 48 cm (19 in.) racks
• Self-adhesive elastic bumpers
• CD-ROM
• Quick Installation Guide
Bosch Security Systems | 2005-12 | V1.5
EN | 3
EN | 4
Quick Installation Guide | VideoJet 8008 / VideoJet 8004
1. Unpack the Box
• Please check the delivery for completeness and integrity.
• Have your unit checked by Bosch Security Systems if you detect any damage!
Bosch Security Systems | 2005-12 | V1.5
VideoJet 8008 / VideoJet 8004 | Quick Installation Guide
EN | 5
2. Prepare the Unit for Initial Configuration
• Connect the configuration cable to the RS232/485 interface and to a serial interface of the
computer.
• Connect the power cable to the POWER receptacle on the unit; then insert the plug into
a suitable power (mains) outlet.
Bosch Security Systems | 2005-12 | V1.5
EN | 6
Quick Installation Guide | VideoJet 8008 / VideoJet 8004
3. Configure the IP Address
• Start the terminal program (for example, HyperTerminal); enter the command ?. Enter the user
name service to access the IP menu.
• Enter the command i twice to open the IP menu and to display the current IP address.
• Enter the desired IP address (e.g. 192.168.0.88). The new IP address is displayed and is valid
after a reboot.
• If necessary, enter the command s and enter a new subnet mask.
• Use the commands shown for further settings if required.
Bosch Security Systems | 2005-12 | V1.5
VideoJet 8008 / VideoJet 8004 | Quick Installation Guide
4. Connect the Cameras and the Network Cable
• Disconnect the unit from the power outlet and from the computer.
• Connect the cameras to the Video 1 to Video 8 sockets.
• Connect the unit to the network via the 10/100/1000 Mbit Base-T socket.
Bosch Security Systems | 2005-12 | V1.5
EN | 7
EN | 8
Quick Installation Guide | VideoJet 8008 / VideoJet 8004
5. Connect the Alarm Switches
• Connect the alarm switches to the In1 to In10 terminals.
• Plug the power cable into the power outlet again.
Bosch Security Systems | 2005-12 | V1.5
VideoJet 8008 / VideoJet 8004 | Quick Installation Guide
6. Connect the Audio Components (only audio versions)
• Connect the switch leads to the R1 to R5 terminals.
• Use the Audio 1 to Audio 8 jacks for audio line connections.
• Use the Audio Out jack for the speaker connection.
• Attach the leads from a Siedle module TLM 611-0 SM to the AI and AO terminals.
Bosch Security Systems | 2005-12 | V1.5
EN | 9
EN | 10
Quick Installation Guide | VideoJet 8008 / VideoJet 8004
7. Test the Configuration
• Launch the Web browser and enter the IP address of the unit as the URL
(e.g. http://192.168.0.88) to check that the unit is properly connected to the network.
Note: Set the graphics card of the computer to 16-bit or 32-bit color depth. Otherwise the
computer cannot display the video images.
• Use the links at the top of the pages to navigate.
Bosch Security Systems | 2005-12 | V1.5
VideoJet 8008 / VideoJet 8004 | Quick Installation Guide
EN | 11
8. Configure the Parameters
• Click the SETTINGS link.
• Click the buttons in the Overview or the navigation links, located in the left frame, to configure
the various parameters of the unit.
Bosch Security Systems | 2005-12 | V1.5
Bosch Sicherheitssyteme GmbH
Robert-Koch-Straße 100
85521 Ottobrunn
Germany
www.bosch-sicherheitssysteme.de
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
www.boschsecuritysystems.com
Copyright © 2006 Bosch Sicherheitssysteme GmbH
Subject to change. Printed in Germany.
2908B/0106/QIG_en/4D