Samsung RF197AB Product specifications

REFRIGERATOR
BOTTOM MOUNT FREEZER
BASIC : RF195AB/RF197AB/
RF217AB
MODEL NAME : RF195ABRS
RF195ABWP
RF197ABRS
RF197ABWP
RF217ABRS
RF217ABWP
REFRIGERATOR
RF195ABBP
RF195ABPN
RF197ABBP
RF197ABPN
RF217ABBP
RF217ABPN
CONTENTS
1. PRECAUTIONS(SAFETY WARNINGS)
2. PRODUCT SPECIFICATIONS
3. DISASSEMBLY AND REASSEMBLY
4. TROUBLESHOOTING
5. EXPLODED VIEW & PARTS LIST
6. PCB DIAGRAM
7. WIRING DIAGRAM
8. SCHEMATIC DIAGRAM
For the latest parts information, Please access to our service web site
(North America : http://service.samsungportal.com)
WARNING
IMPORTANT SAFETY NOTICE
The service guide is for service men with adequate backgrounds of
electrical, electronic, and mechanical experience. Any attempt to repair
a major appliance may result in personal injury and property damage.
The manufacturer or dealer cannot be responsible for the interpretation
of this information.
SAMSUNG ELECTRONICS AMERICA, INC.
Technical Service Guide
Copyright ⓒ2009
All rights reserved. This service guide may not be reproduced in whole or in
part in any form without written permission from the SAMSUNG ELECTRONICS
Company.
Contents
1. PRECAUTIONS(SAFETY WARNINGS) ······························4
2. PRODUCT SPECIFICATIONS ··································7
2-1) INTRODUCTION OF MAIN FUNCTION ···························7
2-2) SPECIFICATIONS ····································8
2-3) INTERIOR VIEWS ····································9
2-4) MODEL SPECIFICATION·································10
2-5) MODEL SPECIFICATION &SPECIFICATION CHART ····················11
2-6)DIMENSIONS OF REFRIGERATOR (INCHES) ·······················14
2-7) REFRIGERANT ROUTE IN REFRIGERATION CYCLE ····················15
2-8) COOLING AIR CIRCULATION ······························16
3. DISASSEMBLY AND REASSEMBLY ······························17
3-1) PRECAUTION······································17
3-2) REFRIGERATOR DOOR ·································18
3-3) FREEZER DOOR(RF195) ································19
3-3) FREEZER DOOR(RF217,RF197) ·····························20
3-4) FREEZER DOOR SWITCH ································21
3-5) REFRIGERATOR LIGHT ·································22
3-6) GLASS SHELVES ····································22
3-7) MOVING TRAY ·····································23
3-8) VEGETABLE & FRUIT DRAWERS SHELF ·························23
3-9) GALLON DOOR BIN ···································24
3-10) EVAPORATOR IN REFRIGERATOR ···························24
3-11) DOOR HANDLE FREEZER ·······························26
3-12) FREEZER LIGHT ····································26
3-13) EVAPORATOR COVER IN FREEZER···························27
3-14) EVAPORATOR INFREEZER ·······························27
3-15) MOTOR FAN······································28
4. TROUBLESHOOTING ·····································30
4-1) CHECK ITEMS BEFORE FAILURE DIAGNOSIS·······················30
4-2) DIAGNOSTIC METHOD ACCORDING TO THE TROUBLE SYMPTOM(FLOW CHART) ·····41
5 . EXPLODED VIEW & PARTS LIST ·······························59
5-1) FREEZER ·······································59
5-2) REFRIGERATOR ····································62
5-3) CABINET ········································67
5-4) DISASSEMBLY OF FREEZER DOOR ···························72
5-5) DISASSEMBLY OF REFRIGERATOR DOOR LEFT ·····················75
5-6) DISASSEMBLY OF REFRIGERATOR DOOR RIGHT ····················78
5-1) FREEZER ·······································81
5-2) REFRIGERATOR ····································83
5-3)CABINET ········································86
5-4) DISASSEMBLY OF FREEZER DOOR ···························89
5-5) DISASSEMBLY OF REFRIGERATOR DOOR LEFT ·····················91
5-6) DISASSEMBLY OF REFRIGERATOR DOOR RIGHT ····················93
6. PCB DIAGRAM ········································95
6-1) PCB L AYOUT WITH PART POSITION (MAIN BOARD) ···················95
6-2) CONNECTOR LAYOUT WITH PART POSITION (MAIN BOARD) ···············96
7. WIRING DIAGRAM ······································97
8. SCHEMATIC DIAGRAM ····································98
8-1) REFRIGERATOR BLOCK DIAGRAM····························98
8-2) MAIN··········································99
1. PRECAUTIONS(SAFETY WARNINGS)
● Due to the risk of electric shock, be sure to unplug the unit before servicing.
● Use the right electronic equipment for your new Refrigerator.
Make sure to check out the right model name, rated voltage and current, operating
temperature, etc.
● Upon repair, make sure that harnesses are not to be water-penetrated and are bundled tight.
Should not be detached by a certain amount of external force.
● Upon repair, completely remove dust or other foreign substances from housing, harness,
connector, etc.
To prevent fire by tracking, short, etc.
● After repair, check out the assembled state of parts.
It should be the same as the previous state.
● Check out the surrounding conditions.
Change the location, if the fridge is located at humid, wet places or the installed state is
unstable.
● If needed, ground the fridge.
Especially, if there is a possibility of electric leakage, ground is indispensable.
● Do not allow consumers to overload a certain outlet.
● Check out whether the power cord or the outlet is broken, squeezed, chopped off or heatdeformed.
Repair or replace the defective power cord/outlet immediately.
Make sure the power cord is not punctuated or stomped down.
● Do not allow consumers to keep food unstable or place bottles in the Freezer Room.
● Do not allow consumers to repair the fridge for themselves.
● Do not allow consumers to keep things except for food.
Pharmaceutical, Chemical substances : These are not possible to be fine-Controlled with a
consumer fridge.
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of explosion.
4
PRECAUTIONS(SAFETY WARNINGS)
Read all instructions before repairing the product and keep to the instructions
in order to prevent danger or property damage.
CAUTION/WARNING SYMBOLS DISPLAYED SYMBOLS
means Prohibition”.
Warning
Caution
Indicates that a
danger of death
or serious injury
exists.
means Do not disassemble”.
means No contact”.
means The things to
be followed”.
means Power cord should be
unplugged from the consent”
Indicates that a risk
of personal injury
or material damage
exists.
means Earth to prevent Electric
shock”.
Warning & Caution
Due to risk of electric shock, be sure to
unplug the unit before servicing.
Use the rated components on the
replacement.
On repair, make sure that the wires such
as harness are bundled tightly.
● It may cause electric shock.
● Check the correct model, rated voltage,
rated current, operating temperature and so on.
● Bundle tightly wires in order not to be detached
by the external force and then not to be wetted.
comRated
pone
nts
Unplug
On repair, remove completely dust or
other things of housing parts, harness
parts, and check parts.
● Cleaning may prevent the possible fire by tracking
or short.
After repair, check the assembled state of
components.
Check if there is any trace indicating the
permeation of water.
● It must be in the same assembled state
when compared with the state before disassembly.
● If there is that kind of trace, change
the related components or do the necessary treatment
such as taping using the
insulating tape.
5
PRECAUTIONS(SAFETY WARNINGS)
❈ Please ler users know following warnings & cautions in detail.
Warning & Caution
Do not allow users to put bottles or kinds of
glass in the freezer.
Do not allow users to store narrow and
lengthy bottles or foods in a small multipurpose room.
Do not allow users to store
pharmaceutical products, scientific
materials, etc., in the refrigerator.
● Freezing of the contents may inflict a wound.
● It may hurt you when refrigerator door is
opened and closed resulting in falling
stuff down.
● The products which temperature
control should not be stored in
the refrigerator.
Prohibition
Prohibition
Do not allow users to insert the power
plugs for many products at the same time.
Do not allow users to disassemble,
repair or alter.
● May cause abnormal generation of heat or fire.
● It may cause fire or abnormal operation
which leads to injury.
Do not allow users to bend the power
cord with excessive force or do not have
the power cord pressed by heavy article.
Prohibition
Prohibition
Do not allow users to store articles on the
product.
● Opening or closing the door may cause things to
fall down, with may inflict a wound.
● May cause fire.
Do not
disassemble
Do not allow users to install the
refrigerator in the wet place or the place
which water splashes.
The Appliance must be properly
grounded.
● Deterioration of insulation of electric
parts may cause electric shock or fire.
● If earthing is not done, it will cause
breakdown and electric shock.
Prohibition
Earth
6
2. PRODUCT SPECIFICATIONS
2-1) Introduction of Main Function
●
The SAMSUNG bottom mount freezer in 2009 has the following characteristics.
Surround Multi Flow
● Uniform cooling for each shelf by a center
positioned fan and duct with multiple flow
effluences.
Twin Cooling System
● The refrigerator and the freezer have two
evaporators. Given this independent system, the
freezer and the refrigerator are cooled individually
as required and are, therefore, more efficient. Food
odor from the refrigerator does not affect food in the
freezer due to separate air flow circulation.
Easy Handle System(RF197AB,RF217AB)
● The freezer door is more user-friendly and
convenient.
Moving Tray
● The Deli Drawer can be moved side to side for
customer improved customer satisfaction.
Digital Display & Temperature Control
● Digital Display & Temperature Control look and feel
neat & clear design.
7
PRODUCT SPECIFICATIONS
2-2) Specifications
ELECTRICAL SPECIFICATIONS
Defrost Control ···································· From 12 to 64 hrs
Thermo Bimetal Protector ··········140°F(60℃)(off) 104°F(40℃)(on)
Defrost Thermistor(502AT) ·········R : 62.6°F(12℃) F : 57.2°F(14℃)
Electrical Rating ···························AC115V 60Hz 11.6 Amps
Maximum Current Leakage ··································· 0.5 mA
Maximum Ground Path Resistance ··························0.1 Ohm
Energy Consumption ···························· 453kWh/year(RF21)
445kWh/year(RF19)
NO LOAD PERFORMANCE
Refrigerator
Fan
(Air inlet)
(Air inlet)
(Air inlet)
(Air inlet)
Heat exchanger
Heat exchanger
90℉(32℃)
Ambient Temperature
70℉(21℃)
Refrigerator,℉
34℉(1℃)∼46℉(8℃) 34℉(1℃)∼46℉(8℃)
Freezer,℉
-8℉(-22℃)∼8℉(-13℃) -8℉(-22℃)∼8℉(-13℃)
Run Time,%
40
65
REFRIGERATION SYSTEM
Refrigerant Charge ···························· (R134a)5.64 oz(160g)
Compressor(MK162D-L1U) ·····················730 Btu/hr(0.124kw)
Compressor oil ···········································Freol α10c
",157"
"(0.82mm,4000mm)
Capillary tube(Dia, Length) ······ 0.032"
Freezer
Fan
Fan
Heat exchanger
Heat exchanger
Dryer
C-Fan
ASSY PBA
(Air inlet)
(Air inlet)
Compressor
condenser Water Valve
INSTALLATION
Clearance must be provided for air circulation
"(50mm)
AT TOP ··················································2"
"(25mm)
AT SIDES ················································1"
"(50mm)
AT REAR ················································2"
8
PRODUCT SPECIFICATIONS
2-3) Interior Views
Door Bin
Push it up and
slide it out to
disassemble.
Light
Moving Tray
Pull it out to disassemble.
Glass Shelf
Pull it out until its stop
Tilt down and slide it out.
Vegetable Drawer
Fruit Drawers
Freezer Drawer Bin
9
PRODUCT SPECIFICATIONS
2-4) Model Specification
SAMSUNG
ITEM
SPEC
RF195, RF197, RF217
Appearance
Noise
Performance (RF217)
Product Zone
Cooling Tech
Twin Cooling
Door Shape
Contour
Special Room
Cool Select Pantry
Cooling
F-Room
220↓
177.3
Speed(Min)
R-Room
220↓
179.1
F-Room
-26.0↓
-29.9
R-Room
2.0↓
-1.6
F-Room
-18.0↓
-21.3
R-Room
5.0↓
-4.3
89.6℉(32°C)
109.4℉(43°C)
Temperature
Distribution
(Fridge)
F-Room
2.0↓
0.6
R-Room
2.0↓
0.8
Run Time
N-N
65%↓
51.6
Sound power level
46dB↓
41.8
Sound Pressure level
45dB↓
39.7
10
PRODUCT SPECIFICATIONS
2-5) Model Specification &Specification Chart
Free Standing Model
Model Number/
BOM code
Swing/Auto Ice Maker
Drawer/Auto Ice Maker
3 Door
RF195
Dimension (WxDxH)Inch/mm 32¼x28¼x70(817x715x1778)
Capacity
(net)
(cu.ft/l)
Dimension
(Net :
Inch/mm)
Weight
(lb)
RF197
RF217
32¼x28¼x70(817x715x1778)
32¼x230¼x70(817x765x1778)
Total
(17.8 / 504.0)
(17.8 / 504.0)
(19.7 / 557.8)
Refrigerator
(12.1 / 342.6)
(12.1 / 342.6)
(13.3 / 376.6)
Freezer
(5.7 / 161.4)
(5.7 / 161.4)
(6.4 / 181.2)
Width
32 ¼ / 817
32 ¼ / 817
32 ¼ / 817
w/o Hinge
68 ⅝/ 1743
68 ⅝/ 1743
68 ⅝ / 1743
With Hinge
69 ¾/1772
69 ¾/1772
69 ¾ /1772
with Handle
30 ½ / 774
30 ½ / 774
32 ½ / 824
Depth w/o Handle
28 ½/ 725
28 ½/ 725
30 ½ / 775
24 ⅜/ 617
24 ⅜/ 617
26 ¼ / 667
Width
34 ⅝ / 879
34 ⅝ / 879
34 ⅜ / 879
Height
75 / 1906
75 / 1906
75 / 1906
Depth
30 ¼ / 766
30 ¼ / 766
33 ⅛ / 840
Net
238lb (108kg)
238lb (108kg)
251lb (114kg)
Packing
269lb (122kg)
269lb (122kg)
282lb (128kg)
Height
w/o Door
Dimension
(packing :
Inch)
Drawer/Auto Ice Maker
Compressor
Reciprocate
Rated Frequency and Frequency
AC 115V/60Hz
Refrigerant
R 134a
Foaming Agent
C-Pentane
Refrigerant Input Amount
5.64 oz (160g)
Type Refrigerator
Indirect Cooling Method Refrigerator
Motor Rated Consumption Power
130W
Electric Heater Rated Consumption Power
350W
COLOR
Cabinet (Both Side)
Door
Molding
Black
All Black
Empire Black
I Black
Real STS
Noble STS
Real Stainless
Creamy STS
White
Snow White
Snow White
Snow White
Platinum Inox
Noble STS
Platinum Inox
Creamy STS
11
PRODUCT SPECIFICATIONS
Specification
Model
RF19 *,RF21*
Compressor
Components for Freezer
Defrost Sensor Defrost Cycle
Refrigerator
Freezer
Evaporator
Bimetal
Room Temperature Sensor Components
Defrost Related Components
Items
Model
MK162DL1U-E09
Starting type
AC
Oil Charge
FREOL α-10
Freezer
SPLIT FIN TYPE
Refrigerator
SPLIT FIN TYPE
Condenser
Forced and Natural Convection Type
Dryer
Molecular shieve XH-9
Capillary tube(Dia x Length)
R : 0.032” x 157” (0.82mm x 4000mm) / F : 0.032” x 157” (0.82mm x 4000mm)
Refrigerant
R134a
Model
Temperature Selection
ON(℉)
OFF(℉)
THERMISTOR
-8℉(-22℃)
0℉(-18℃)
-15℉(-26℃)
(F-SENSOR)
-2℉(-19℃)
5℉(-15℃)
9℉(-23℃)
502AT
8℉(-13℃)
16℉(-9℃)
1℉(-17℃)
Model
Temperature Selection
ON(℉)
OFF(℉)
THERMISTOR
34℉(1℃)
41℉(5℃)
27℉(-3℃)
(R-SENSOR)
38℉(3℃)
45℉(7℃)
30℉(-1℃)
502AT
46℉(8℃)
54℉(12℃)
39℉(4℃)
First Defrost Cycle (Concurrent defrost of F and R)
6hr ±10min
Defrost Cycle(FRE)
12~34hr(varies according to the conditions used)
Defrost Cycle(REF)
6~17hr(varies according to the conditions used)
Pause time
12 ±1min
F Defrost-Sensor
R Defrost-Sensor
F Bimetal-thermo
Protector
R Bimetal-thermo
Protector
Model
THERMISTOR (502AT)
SPEC
5.0 ㏀ at 77℉(25℃)
Model
THERMISTOR (502AT)
SPEC
5.0 ㏀ at 77℉(25℃)
Rated
AC 125V 6A
Operating temperature
Off : 140℉(60℃) / On : 104℉(40℃)
Rated
AC 125V 10A
Operating temperature
Off : 140℉(60℃) / On : 104℉(40℃)
12
PRODUCT SPECIFICATIONS
Items
Specification
Model
RF19 *,RF21*
Defrost Heater(FRE)
Heated at F Defrost
AC 120V, 240W
Defrost Heater(REF)
Heated at R Defrost
AC115V, 120W
Model
4TM412SFBYY-53
Temp.ON
275 ± 9°F(135±5°C)
Temp.OFF
141.8 ± 9°F(61±5°C)
Electric Components
Over Load Relay
Rated Voltage
AC 115V/ 60Hz
Motor-BLDC(FRE)
DC12V / DREP5020LC
Motor-BLDC(REF)
DC12V / DREP5020LC
Motor-BLDC(CIRCUIT)
DC12V / DRCP5030LA
Lamp(FRE)
AC 120V / 40W(1EA)
Lamp(REF)
AC 125/720mA
Door Switch
FRE
DC200V 0.5A / MS-406-SS-01(1EA)
REF
DC200V 0.5A / MS-406-SS-01(2EA)
Power Cord
AC125V 15A
Ground Screw
BSBN (BRASS SCREW)
13
PRODUCT SPECIFICATIONS
2-6)Dimensions of Refrigerator (Inches)
MODEL
A
B
C
D
E
RF19*
RF21*
24 ⅜
28 ½
30 ½
46 ½
41
26 ¼
30 ½
32 ½
48 ½
43
14
PRODUCT SPECIFICATIONS
2-7) Refrigerant Route in Refrigeration cycle
Compressor → Sub-condenser → Side Cluster → Hot Pipe → Dryer → R Capillary
→ R Evaporator → F Evaporator → Suction Pipe → Compressor
15
PRODUCT SPECIFICATIONS
2-8) Cooling Air Circulation
(AXIAL FLOW FAN)
(AXIAL FLOW FAN)
16
3. DISASSEMBLY AND REASSEMBLY
3-1) PRECAUTION
• Unplug the refrigerator before cleaning and making repairs.
• Do not dissemble or repair the refrigerator by yourself.
- It may cause risk of causing a fire, malfunction and/or personal injury.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not plug several appliances into the same multiple power board. The refrigerator should always be
plugged into its own individual electrical which has a voltage rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits, which could
cause a fire hazard from overheated wires.
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• The refrigerator must be grounded.
- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current
leakage from the refrigerator.
• Do not put bottles or glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury.
• Do not store volatile or flammable substances in the refrigerator.
- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause
explosions.
- Required Tools
IMAGE
ITEM
USE
Phillips Head Driver
Use for inserting and
removing screws
Flat Head Driver
Use for assembling and disassembling
of HomeBar, Dispenser, Deli Box, Main
PBA etc..
Hex Wrench Ø2mm
Use for Hinge assembly/disassembly
Socket Wrench Ø10mm
Use for Door Hinge
assembly/disassembly
17
DISASSEMBLY AND REASSEMBLY
3-2) Refrigerator Door
Part Name
How To Do
1. Remove the 3 screws holding
down the top table and remove
it.
2. Disconnect electric wire on the
top of the refrigerator.
Refrigerator
Door
3. Remove the 3 hex bolts that hold
the hinge on the top of the
refrigerator with the 7/16” socket
wrench.
4. Remove the screw that holds the
ground wire with a philips
screwdriver(+).
5. Separate the Hinge from the
electric wire and ground wire.
18
Descriptive Picture
Top Table
DISASSEMBLY AND REASSEMBLY
Part Name
How To Do
Descriptive Picture
6. Lift the door straight up to
remove.
Be careful not to drop and
scratch the doors while
removing the doors.
Refrigerator
Door
7. Separate the cap on the middle
hinge.
3-3 ) Freezer Door(RF195)
Part Name
How To Do
Freezer Door
1. Remove the screw attached to
the left and right middle hinges
with a philops screwdriver(+).
Remove the 2 hex head bolts
attached to the left and right
middle hinges with an allen
wrench(3/16”).
19
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-3 ) Freezer Door(RF195)
Part Name
How To Do
Descriptive Picture
2. Remove the Middle Hinge
connected to the Freezer.
Freezer Door
3. Disassemble the Freezer door
by lifting it upward. Be careful
not to drop and scratch the
Freezer door
4. Disassemble the Cap on the
Low Hinge.
3-3 ) Freezer Door(RF217,RF197)
Part Name
Freezer
Door
How To Do
1. After opening the Freezer
door,lift the drawer box.
20
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
Part Name
How To Do
Descriptive Picture
2. Remove 4 hex head bolts from
both sides with a socket
wrench(7/16”).
Freezer
Door
3. Lift up the freezer door from the
rails.
Be careful not to drop and
scratch the freezer door.
3-4) Freezer Door Switch
Part Name
How To Do
1. Remove 1 screw at the lower
part of the Freezer.
Freezer
Door Switch
2. Separate the Cap.
3. Separate the Housing.
21
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-5) Refrigerator Light
Part Name
How To Do
Descriptive Picture
1. Remove the lamp cover by
pulling it down as pushing the
rear of lamp cover.
Refrigerator Light
2. Remove the lamp by turning
counterclockwise.
3-6) Glass shelves
Part Name
Glass shelves
How To Do
1. When pulling out the shelf, if it is
not slid out well, lift it up slightly
and pull out again.
22
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-7) Moving tray
Part Name
How To Do
Moving tray
1. When pulling out the Moving
tray, if it is not slid out well, lift it
up slightly and pull out again.
Descriptive Picture
3-8) Vegetable & Fruit Drawers Shelf
Part Name
How To Do
1. Remove the vegetable & fruit
drawer by pulling the roller part
and lifting it up.
Vegetable & Fruit
Drawers Shelf
2. Remove the vegetable & fruit
drawer shelf by pulling it out.
(Refer to the picture)
3. Remove the vegetable & fruit
drawer partition by pulling it out.
(Refer to the picture)
23
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-9) Gallon Door Bin
Part Name
Door Bin
How To Do
Descriptive Picture
1. Simply lift the bin up and pull
straight out.
(Refer to the picture)
3-10) Evaporator In Refrigerator
Part Name
How To Do
1. Remove the screw cap with a
flat-blade screwdriver.
Evaporator In
Refrigerator
2. Unscrew a screw.
3. Unscrew two screws. And
remove the hook by pulling it
from the lower part and pushing
the cover down. (Refer to the
picture)
24
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
Part Name
How To Do
4. Remove the housing cover by
pushing both lateral sides of the
housing cover and pulling it out.
(Refer to the picture)
Evaporator In
Refrigerator
5. Disconnect the housing
connector part. (Refer to the
picture)
6. Remove the evaporator by
Lifting the bottom side of it up
and pulling it out. (Refer to the
picture)
25
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-11) Door Handle Freezer
Part Name
How To Do
Descriptive Picture
Insert the small flat-head driver to
the hole at the bottom of Cap
Handle and pull the handle
assembly out to the front side with
turning driver to one side.
Door Handle
Freezer
CAUTION : Turn the handle
assembly though 90
degrees to allow
access to the bottom
fixing position.
- Required Tools
: Flat Head Driver
Ø0.12~0.13"(Ø3.0~3.3mm)
3-12) Freezer Light
Part Name
How To Do
Freezer Light
1. Remove the light by pulling the
light cover down while pushing
the rear plane of light cover.
26
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-13) Evaporator Cover In Freezer
Part Name
How To Do
Descriptive Picture
1. Remove the freezer door and
freezer drawer by pulling out the
drawer and then unscrewing 2
screws. Lift up the evaporator
cover.
Evaporator Cover
In Freezer
2. Disengage the housing
connector and remove the
evaporator cover.
3-14) Evaporator InFreezer
Part Name
How To Do
1. Remove the housing cover by
pushing both lateral sides of
housing cover part and pulling it
out. Remove the housing
connector part.
Evaporator In
Freezer
2. Remove the evaporator by
pulling the lower part of the
evaporator while lifting it up.
27
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
3-15 ) Motor Fan
Part Name
How To Do
1. Unscrew 4 screws of cover
compressor.
2. Disengage the housing
connector. (Refer to the picture)
Motor Fan
3. Remove the hooker of support
circuit motor by lifting the hooker
up and pulling it out.
4. Remove the screw with a flatblade screwdriver. (Refer to the
picture)
5. Remove the motor fan by pulling
the fan out while graping the
motor part.(Refer to the picture)
28
Descriptive Picture
DISASSEMBLY AND REASSEMBLY
Part Name
How To Do
6. Unscrew 2 screws fixed in the
motor.
Motor Fan
7. Remove the hook of the motor
cover with a flat-blade (-)
screwdriver and then remove the
motor.
29
Descriptive Picture
4. TROUBLESHOOTING
4-1) Check items before failure diagnosis
4-1-1. TEST mode (Manual operation / Manual defrost function)
●
●
●
If Energy Saver Key + Fridge Key on the front of panel are pressed simultaneously for 8 seconds, the test
mode will be activated and all displays on the front of panel will be off.
If any key on the front panel is pressed within 15 seconds after changing to Test Mode, it will be operate as in
the sequence below ; Manual operation (FF) → Manual defrost of R (rd) → Manual defrost of F/R (Fd) →
Cancel (Display all off).
If any key on the front of panel is not pressed within 15 seconds after the Test Mode, the Test Mode will be
canceled and it will be returned to previous mode.
If the test mode is canceled, power off and reactivate the refrigerator.
1) Manual operation function
❷
❶
① If Power Freeze Key + Fridge Key are pressed simultaneously for 8
seconds and all displays are off, the test mode will be activated (manual operation)
by pressing any key
1-1) If any key is pressed once in TEST MODE, "FF" blinks on the display and it indicates the
refrigerator has entered manual operation. At this moment, buzzer beeps as an alarm.
1-2) If manual function is selected, compressor will run at once without 5 minutes delay in any mode. If
the refrigerator is on the defrost cycle at the moment, defrost will be stopped and manual operation
will begin. (Be careful if manual operation starts at the same time the compressor turns off, as an
overload could occur.)
1-3) If manual operation works, compressor & F-FAN operate continuously for 24 hours and fresh food
compartment will be controlled by the setting temperature.
1-4) When the manual operation runs, setting temperature will be selected automatically as below ;
Freezer compartment -8℉(-22℃), Fresh food compartment 34℉(1℃).
1-5) During manual operation Power Freeze & Power Cool function will not be worked. If a function is
selected, the power function icon of the selected one will be off automatically after 10 seconds.
1-6) Manual operation can be canceled during manual operation by turning on the appliance after
power off(resest) or choosing the following step 4) test cancel mode.
1-7) When the manual operation runs, alarm (0.25 seconds ON/0.75 seconds OFF) will beep
continuously until manual operation is completed and there is no function to make the sound stop.
30
TROUBLESHOOTING
2) Manual defrost (R : Fresh food compartment) function
2-1) If any key is pressed one more time during manual operation (Fresh food compartment), "rd"
shows in the display and then manual operation will be canceled at once and fresh food
compartment will be defrosted.
2-2) At this moment, alarm beeps for 3 seconds from the beginning, and then beeps 0.1 sec ON/ 1 sec
OFF during manual defrost (Fresh food compartment) function.
3) Manual defrost (R & F : Fresh food & Freezer compartment) function
3-1) If any key is pressed one more time during manual defrost (defrost of fresh food compartment,
"rd") "Fd" shows on the display and then fresh food and freezer compartments defrost will operate.
Simultaneous manual defrost of Fresh food and Freezer compartment is on the extension of fresh
food compartment, and when it begins, it operates by comparing the temperature of Freezer
Heater ON, not compare the temperature of fresh food Heater ON separately, That is, in case of
manual defrost of fresh food, it is the Heater On condition and if the simultaneous manual defrost
of fresh food and freezer compartment key before completing deforest, it does not make fresh food
compartment heater OFF by re-comparing the temperature of fresh food compartment EVA.
3-2) At this time, alarm beeps for 3 seconds from the beginning, and then beeps 0.5 sec. ON/ 0.5sec.
OFF during the manual defrost of the fresh food and freezer compartment.
4) Test cancel mode
4-1) During the simultaneous defrosting of fresh food and freezer compartments, if the display panel
changes to the test mode and test button is pressed one more time, defrosting of the fresh food
and freezer compartments will be canceled at the same time and will return to normal operation.
The test functions will also be canceled by turning the main power OFF and ON.
4-1-2. Self-diagnostic function
1) Self-diagnostic function in the initial power ON.
1-1) Micom operates a self-diagnostic function to check the temperature sensor condition within 1
second when the refrigerator is initially turned On.
1-2) If a bad sensor is detected by the self-diagnostic function, the all applicable display LED will blink
for 0.5-second interval. At this moment, there is no beep sound.
(Refer to self-diagnostic CHECK LIST)
1-3) Self-diagnostic button is recognized only when the error is displayed by the bad sensor. The
Display does not operate normally, but temperature control will be controlled by the emergency
operation.
1-4) When the error is detected by self-diagnosis, the error can be canceled automatically if all troubled
sensors are corrected or Self-diagnostic function key (Power Freeze + Power Cool) are pressed
simultaneously for 8 seconds. (Return to normal display mode)
31
TROUBLESHOOTING
❷
❶
① If Power Freeze Key + Power Cool Key are pressed simultaneously for 8 seconds,
the error mode self-diagnosis will be canceled.
2) Self-diagnostic function during normal operation
❷
❶
2-1) If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds during normal
operation, the temperature setting display will operate for 2 seconds (ALL ON/OFF 0.5 sec each).
If Power Freeze Key + Power Cool Key are pressed simultaneously for 8 seconds (including above
2 seconds), the self-diagnostic function will be selected.
2-2) At this moment, self-diagnostic function will start with a 'ding-dong’ sound. If there is an error, the
error display will operate for 30 seconds and then return to normal condition whether problem is
corrected or not.
(Buzzer sounds 'ding-dong') (Refer to self-diagnosis CHECK LIST).
2-3) Input by button is not acceptable during self-diagnostic function.
32
TROUBLESHOOTING
Self-diagnosis CHECK LIST
NO
Trouble item
Display LED
1
Ice Maker Sensor Error
R-1-ⓐ
ICE MAKER SENSOR part error.
2
R-Sensor Error
R-1-ⓑ
R SENSOR part error.
3
R-DEF-Sensor Error
R-1-ⓒ
R defrost SENSOR part error.
4
R-FANError
R-1-ⓓ
R inner fan motor part error.
5
Ice Maker function Error
R-1-ⓔ
ICE MAKER operation error.
6
R-DEF. - Heater Error
R-1-ⓖ
R defrost part error.
7
Ambient-Sensor Error
F-1-ⓐ
External SENSOR part error.
8
F-Sensor Error
F-1-ⓑ
F SENSOR part error.
9
F-DEF-Sensor Error
F-1-ⓒ
F defrost SENSOR part error.
10
F-FAN Error
F-1-ⓓ
F inner fan motor part error.
11
C-FAN Error
F-1-ⓔ
Machine room fan motor part error.
12
F-DEF. - Heater Error
F-1-ⓖ
F defrost part error.
Trouble contents
F-10 F-1
R-10 R-1
ⓐ
ⓕ
ⓔ
ⓖ
ⓓ
33
ⓑ
ⓒ
TROUBLESHOOTING
Self-diagnostics check list
LED
Item
R-1-ⓐ
Ice Maker Sensor Error
R-1-ⓑ
R-Sensor Error
R-1-ⓒ
R-DEF-Sensor Error
Trouble contents
Display error : In case of Separation of
sensor housing part, contact error,
disconnection, short circuit.
Display error by temperature : when the
sensing temperature is more than 149℉
(+65℃) or less than -58℉(-50℃).
Diagnostic method
When checking the voltage of MAIN PCB
CN90 #3 ↔ #4 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #3 ↔ #8 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #4 ↔ #8 : Shall be between
4.5V~1.0V.
Display error : In case of Feed Back signal
line contact error, separation of motor wire, Voltage of MAIN PCB CN76
Yellow ↔ Gray : Shall be between 7V~12V.
motor itself error during operation of
applicable fan motor.
R-1-ⓓ
R-FAN Error
R-1-ⓔ
Ice Maker Error
Display error : When ice making kit is
harvested more than 3times and level error.
** Only for the Ice Maker applied model.
After replacing ice maker, check the
operation by turning the appliance ON again.
R-1-ⓖ
R-DEF. Error
Fresh food Compartment
Display error : In case of separation of
defrost heater housing, contact error,
disconnection, short circuit, or temperature
fuse error.
Display error : If defrost does not finish
though the defrost of fresh food
compartment is heating continuously for
more than 80 minutes.
After separating MAIN PCB CN72 wire
from PCB, the checked resistance value of
CN70 White ↔ Orange shall be
103/397ohm ± 10%
(Resistance value is varied by input power)
↔ Model without Ice maker (120ohm ± 10%)
Check 0 Ohm for heater short, &æOhm for
wire / bimetal Open.
F-1-ⓐ
Ambient-Sensor Error
F-1-ⓑ
F-Sensor Error
F-1-ⓒ
F-DEF-Sensor Error
F-1-ⓓ
F-FAN Error
Display error : In case of Feed Back signal line
contact error, separation of motor wire, motor itself Voltage of MAIN PCB CN76 Pink ↔ Gray :
Shall be between 7V~12V.
error during operation of applicable fan motor.
F-1-ⓔ
C-FAN Error
Display error : In case of Feed Back signal line
contact error, separation of motor wire, motor itself Voltage of MAIN PCB CN76 Blue ↔ Gray :
Shall be between 7V~12V.
error during operation of applicable fan motor.
F-DEF. Error
Freeze Compartment
Display error : In case of separation of
defrost heater housing, contact error,
disconnection, short circuit or temperature
fuse error.
Display error : If defrost does not finish
though the defrost of freeze compartment
is heating continuously for more than 70
minutes.
F-1-ⓖ
Display error : In case of separation of
sensor housing parts, contact error,
disconnection, short circuit.
Display error by temperature : When the
sensing temperature is more than 149℉
(+65℃) or less than -58℉(-50℃).
34
When checking the voltage of MAIN PCB
CN31 #1 ↔ #3 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #5 ↔ #8 : Shall be between
4.5V~1.0V.
When checking the voltage of MAIN PCB
CN30 #6 ↔ #8 : Shall be between
4.5V~1.0V.
After separating MAIN PCB CN72 wire
from PCB, the checked resistance value of
CN70 Brown ↔ Orange shall be
66/240 ohm ± 10%.
(Resistance value is varied by input power)
Check 0 Ohm for heater short, &æOhm for
wire / bimetal Open.
TROUBLESHOOTING
4-1-3. Load condition display function
❶
❶
① If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds,
All ON/OFF will blink in 0.5 intervals for 2 seconds.
② If you press Fridge key after pressing the above keys, the load condition mode will start.
1) If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds during normal
operation, the temperature setting display of the fresh food and freezer compartments will blink ALL
ON/OFF in 0.5 intervals for 2 seconds.
2) At this moment, if the Fridge Key is pressed after pressing the Power Freeze Key + Power Cool Key and
pressing Fridge Key, load condition display mode will be returned with alarm ("Ding-dong").
3) Load condition display mode shows the load that the micom signal is outputting. However, even though it
shows that micom signal is outputting, it does not show whether the load is operating or not. Though the
load operation is displayed, the load could not operated due to an actual load error or PCB relay error
etc. (This function would be applied at A/S.)
4) Load condition display function will run for for 30 seconds and then return to normal conditions.
5) Load condition display is as below.
F-10 F-1
R-10 R-1
ⓐ
ⓕ
ⓔ
ⓖ
ⓓ
35
ⓑ
ⓒ
TROUBLESHOOTING
Load mode Check list
Display LED
Display contents
R-1-ⓐ
R-FAN High
When fresh food compartment FAN High operates,
applicable LED ON.
R-1-ⓑ
R-FAN Low
When fresh food compartment FAN Low operates,
applicable LED ON.
R-1-ⓒ
R-DEF Heater
R-1-ⓓ
Start Mode
R-1-ⓔ
Overload condition
When ambient temperature is more than 93℉(34℃), LED ON.
R-1-ⓕ
Low temperature condition
When ambient temperature is less than 72℉(22℃), LED ON.
F-1-ⓔ,ⓕ
ALL LED Off
Normal Condition
When the ambient temperature is between
73℉(23℃) ~ 91℉(33℃).
R1-ⓖ
Exhibition Mode
At the display mode, LED ON.
F-1-ⓐ
COMP.
F-1-ⓑ
F-FAN High
When freezer FAN High operates, applicable LED ON.
F-1-ⓒ
F-FAN Low
When freezer FAN Low operates, applicable LED ON.
F-1-ⓓ
F-DEF Heater
R-10-ⓔ
C-FAN High
When compressor FAN High operates, applicable LED ON.
R-10-ⓕ
C-FAN Low
When compressor FAN Low operates, applicable LED ON.
R-10-ⓖ
French Heater
Operation contents
When fresh food compartment defrost heater operates, LED ON.
When initial power applied to refrigerator, LED ON.
When compressor operates, applicable LED ON.
When freezer defrost heater operates, LED ON.
When french heater operates, applicable LED ON.
36
TROUBLESHOOTING
4-1-4. Display / Exhibition mode setting function
❶
❶
① If Power Freeze Key + Freezer Key are pressed for 3 seconds,
exhibition / display mode will be started.
1) If Power Freeze Key + Freezer Key are pressed simultaneously for 3 seconds during normal operation,
exhibition / display mode will be started with buzzer sound ("Ding-dong").
2) If above Power Freeze Key + Freezer Key are pressed repeatedly, exhibition / display mode will be
canceled.
3) If exhibition / display mode is selected, "OF-OF" blinks on the temperature setting display of the panel
and it indicates the refrigerator has entered the exhibition / display mood.
4) If fresh food and freezer compartments sensors are higher than 149℉(65℃) during exhibition / display
mode, exhibition / display mode will be canceled automatically and cooling operation will be returned.
(There is no buzzer sound when the exhibition/display mode is canceled by the temperature.)
5) Operation contents of exhibition/display mode
-. All function like display, fan motor, etc operate normally, but only compressor does not operates.
-. Defrost is not operated. (including french heater)
-. Display function of initial actual temperature is finished.
-. Exhibition/Display mode will be operated though Power ON after Power OFF under the
exhibition/Display mode condition.
4-1-5. Option setting function
●
If Freezer Key + Power Cool Key are pressed simultaneously for 12 seconds during normal operation,
fresh food and freezer compartments temperature display will be changed to option setting mode.
❶
❶
37
TROUBLESHOOTING
① If Freezer Key + Power Cool Key are pressed simultaneously for 12
seconds, option setting mode will be started.
Key control method after changing to option mode.
Code
Down
Reference
Value Down
Code Up
Reference
Value
Code
Reference
Value Up
Key control in option mode
Power Freeze Key
Freezer Key
Power Cool key
Fridge key
●
Code Down key
Code Up key
Reference Value down key
Reference Value Up key
If the display changes to option setting mode, all displays will be off except freezer and fresh food
compartments temperature display as below. (Fresh food and freezer compartments is explained only
because all options are operated with the same method according to the option table.)
Code
Reference Value
1) For example, if you want to change freezer compartment standard temperature to -6℉ (-3℃) by
operating option, do as following. This function is for changing the standard temperature. In -2℉(-19℃)
of current temperature of freezer compartment, if you make the temperature lower to -6℉(-3℃) by the
option, the standard temperature would be controlled -8℉(-22℃). Therefore, if you changed the setting
of temperature option to -2℉(-19℃) on the panel, the appliance will be operated with -8℉(-22℃). It
means that standard temperature is controlled -6℉(-3℃) less than setting temperature in the display.
NOTE
Basically, option function has cleared data at shipping process. Therefore, all setting value are
"0". But, check the quality information manual or specifications, because setting value could be
changed particularly for the purpose of improving quality at mass producing process.
38
TROUBLESHOOTING
2) After changing to the option mode, fresh food compartment "0", freezer compartment "0" will be
displayed. (Basically, fresh food compartment "0", freezer "0" would be set at shipping process, but
setting value could be changed for the purpose of improving quality at mass producing process.)
- If fresh food compartment "0" shows only, temperature reference value of freezer compartment will be
set and current freezer compartment temperature code will be displayed on the freezer temperature
display.
3) If freezer compartment "4" is set as below freezer compartment code after fresh food compartment "0" is
set, standard temperature of freezer compartment will be lower than -6℉(-3℃).(Refer to the picture
"Changing the freezer compartment temperature")
Code
Reference Value
: If you wait for 20 seconds after completing the setting, MICOM will save the setting value to the
EEPROM and normal display will be returned and the option setting mode will be canceled.
4) Option changing method as above is the same as all LMF model.
5) It is possible to regulate the fresh food compartment temperature, water supplying quantity ejecting
temperature / ejecting time of Ice maker, return temperature agter defrost, hysteresis per temperature,
notch gap per temperature, etc.
6) Option function is set in the EEPROM at shipping process in the factory. You would better not to change
the option of your own. Completing the setting is that option function return to normal display after 20
seconds. Do not turn off the appliance before returning to the normal display mode.
NOTE
Option setting function exists in the other items. We will skip the explanation of the other
functions by the option because it is associated with refrigerator control function and is not
needed at SERVICE.
(Please do not set the other options except above SERVICE Manual.)
39
TROUBLESHOOTING
4-1-5. Option TABLE
1) Temperature changing table of freezer compartment
Setting ITEM
Freezer Temp Shift
MODEL
NW2 FDR
Fridge Room 7-SEG
0
Reference
Value
Setting value
Freezer
Compartment
Code
Temp.
compensation
0
0
1
-1 ℉(-0.5℃)
2
-2 ℉(-1.0℃)
3
-3 ℉(-1.5℃)
4
-4 ℉(-2.0℃)
5
-5 ℉(-2.5℃)
6
-6 ℉(-3.0℃)
7
-7 ℉(-3.5℃)
8
+1 ℉(+0.5℃)
9
+2 ℉(+1.0℃)
10
+3 ℉(+1.5℃)
11
+4 ℉(+2.0℃)
12
+5 ℉(+2.5℃)
13
+6 ℉(+3.0℃)
14
+7 ℉(+3.5℃)
15
+8 ℉(+4.0℃)
Code
Reference Value
ex) If you want to change the freezer standard
temperature to -4℉(-2°C)
2) Temperature changing table of fresh food compartment
Setting ITEM
Fridge Temp Shift
MODEL
NW2 FDR
Fridge Room 7-SEG
1
Reference
Value
Setting value
Freezer
Compartment
Code
Temp.
compensation
0
0
1
-1 ℉(-0.5℃)
2
-2 ℉(-1.0℃)
3
-3 ℉(-1.5℃)
4
-4 ℉(-2.0℃)
5
-5 ℉(-2.5℃)
6
-6 ℉(-3.0℃)
7
-7 ℉(-3.5℃)
8
+1 ℉(+0.5℃)
9
+2 ℉(+1.0℃)
10
+3 ℉(+1.5℃)
11
+4 ℉(+2.0℃)
12
+5 ℉(+2.5℃)
13
+6 ℉(+3.0℃)
14
+7 ℉(+3.5℃)
15
+8 ℉(+4.0℃)
Code
Reference Value
ex) If you want to change the freezer compartment
standard temperature to 4℉(2°C).
40
TROUBLESHOOTING
4-2) Diagnostic method according to the trouble symptom(Flow Chart)
DATA1.Temperature table
Resistance value and MICOM port voltage of sensor according to the temperature
SENSOR CHIP : based on PX41C
℃
℉
-50
-49
-48
-47
-46
-45
-44
-43
-42
-41
-40
-39
-38
-37
-36
-35
-34
-33
-32
-31
-30
-29
-28
-27
-26
-25
-24
-23
-22
-21
-20
-19
-18
-17
-16
-15
-14
-13
-12
-11
-10
-9
-8
-7
-6
-58
-56.2
-54.4
-52.6
-50.8
-49
-47.2
-45.4
-43.6
-41.8
-40
-38.2
-36.4
-34.6
-32.8
-31
-29.2
-27.4
-25.6
-23.8
-22
-20.2
-18.4
-16.6
-14.8
-13
-11.2
-9.4
-7.6
-5.8
-4
-2.2
-0.4
1.4
3.2
5
6.8
8.6
10.4
12.2
14
15.8
17.6
19.4
21.2
Voltage Resistance
4.694
4.677
4.659
4.641
4.622
4.602
4.581
4.560
4.537
4.514
4.490
4.465
4.439
4.412
4.385
4.356
4.326
4.296
4.264
4.232
4.199
4.165
4.129
4.093
4.056
4.018
3.980
3.940
3.899
3.858
3.816
3.773
3.729
3.685
3.640
3.594
3.548
3.501
3.453
3.405
3.356
3.307
3.258
3.208
3.158
153319
144794
136798
129294
122248
115631
109413
103569
98073
92903
88037
83456
79142
75077
71246
67634
64227
61012
57977
55112
52406
49848
47431
45146
42984
40938
39002
37169
35433
33788
32230
30752
29350
28021
26760
25562
24425
23345
22320
21345
20418
19537
18698
17901
17142
℃
℉
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
23
24.8
26.6
28.4
30.2
32
33.8
35.6
37.4
39.2
41
42.8
44.6
46.4
48.2
50
51.8
53.6
55.4
57.2
59
60.8
62.6
64.4
66.2
68
69.8
71.6
73.4
75.2
77
78.8
80.6
82.4
84.2
86
87.8
89.6
91.4
93.2
95
96.8
98.6
100.4
102.2
Voltage Resistance
3.107
3.057
3.006
2.955
2.904
2.853
2.802
2.751
2.700
2.649
2.599
2.548
2.498
2.449
2.399
2.350
2.301
2.253
2.205
2.158
2.111
2.064
2.019
1.974
1.929
1.885
1.842
1.799
1.757
1.716
1.675
1.636
1.596
1.558
1.520
1.483
1.447
1.412
1.377
1.343
1.309
1.277
1.253
1.213
1.183
41
16419
15731
15076
14452
13857
13290
12749
12233
11741
11271
10823
10395
9986
9596
9223
8867
8526
8200
7888
7590
7305
7032
6771
6521
6281
6052
5832
5621
5419
5225
5039
4861
4690
4526
4369
4218
4072
3933
3799
3670
3547
3428
3344
3204
3098
℃
℉
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
104
105.8
107.6
109.4
111.2
113
114.8
116.6
118.4
120.2
122
123.8
125.6
127.4
129.2
131
132.8
134.6
136.4
138.2
140
141.8
143.6
145.4
147.2
149
150.8
152.6
154.4
156.2
158
159.8
161.6
163.4
165.2
167
168.8
170.6
172.4
174.2
176
177.8
179.6
181.4
183.2
Voltage Resistance
1.153
1.124
1.095
1.068
1.040
1.014
0.988
0.963
0.938
0.914
0.891
0.868
0.846
0.824
0.803
0.783
0.762
0.743
0.724
0.706
0.688
0.670
0.653
0.636
0.620
0.604
0.589
0.574
0.560
0.546
0.532
0.519
0.506
0.493
0.481
0.469
0.457
0.446
0.435
0.424
0.414
0.404
0.394
0.384
0.375
2997
2899
2805
2714
2627
2543
2462
2384
2309
2237
2167
2100
2036
1973
1913
1855
1799
1745
1693
1642
1594
1547
1502
1458
1416
1375
1335
1297
1260
1225
1190
1157
1125
1093
1063
1034
1006
978
952
926
902
877
854
832
810
TROUBLESHOOTING
4-2-1. If the trouble is detected by self-diagnosis
- The error of sensor will be displayed on the front of display.
When the error of sensor is detected at initial power ON, display of abnormal sensor part will blink.
- The appliance will not stop operating when the error of sensor is detected during operation of the
appliance. But normal cooling might be not operated if the appliance is operated by the emergency
operation mode. You would better to check the appliance according to the self-diagnosis of the
manual.
1) If Ice Maker Sensor has trouble
ERROR Code
Start
DATA1.
Temperature table
** Measuring point of resistance value according to
Sensor **
Ice Maker : CN90 #3 → #4 measure the resistance value
** 0Ω : Short trouble / ∞Ω : Opentrouble
Is Main PCB
Connector CN90 inserted
correctly?
YES
Is Ice Maker
Sensor unit normal?
Refer to circuit diagram in th e manual
Sensor MICOM / Connector number
ICE
Connector CN90-4(White) and REG1,
Maker Heat-Sink PCB common Ground
Voltage is measured between 4.6V ~ 0.6V
NO
NO
Replace the Ice maker kit
YES
Is the voltage between
Main PCB Connector CN90-#4(White) and
REG1, Heat Sink normal?
NO (0.6V > Measurement < 4.6V)
YES
Voltage of IC10 MICOM #51 is same with the measuring
voltage of CN90-#4(White), REG1, & Heat Sink from
PCB common Ground part.
→ Check the measure on the MICOM Pin #51 or Sensor
Marking #6(R903).
Is input
voltage of IC10 MICOM #51
normal?
Recheck the wire connection part
NO
YES
No trouble with PCB and temperature sensor.
Recheck the bad contact of the connector.
☞ Checking method of Ice Maker Sensor resistance
CN90 #3(White ) ↔ #4(White)
- Compare with the temperature table after
measuring.
☞ Checking method of Ice Maker Sensor voltage - Measure the
voltage of Sensor Check Point #6(IC10 MICOM #51) on PCB or
CN90-#4(White) ↔ REG1, Heat Sink.
-. Compare with the temperature table after measuring. Below is
the Measuring voltage of CN90-#4(White)↔ REG1, Heat Sink.
42
Bad contact of connector /
Insert correctly
Check the Cold solder joint, hort,
solder touch.
Common PCB
Ground of REG1 Heat-Sink
TROUBLESHOOTING
2) If R Sensor has trouble
ERROR Code
Start
DATA1.
Temperature Table
Is Main PCB
Connector CN30 inserted
correctly?
YES
** Measuring point of resistance value according
to Sensor **
R : CN30 #3 ↔ #8 Measure the resistance value
** ∞Ω : Short trouble / ∞Ω : Open trouble
Is R Sensor unit
normal?
Refer to circuit diagram in the manual
Sensor MICOM/Connector number
Connector CN30#6(White) to REG1
R
HEAT-SINK PCB typical Ground
Voltage is measured between 4.6V ~ 0.6V
Voltage of IC10 MICOM #53 is same with the
measuring voltage of CN30-#3(Red), REG1, & Heat
Sink from PCB common Ground part.
→ Check the measure on MICOM or Sensor
Marking #1(R301).
NO
Bad contact of connector/Insert correctly
NO
Replace the temperature sensor
YES
Is the voltage between Main
PCB Connector CN30- #3(Red) & REG1,
Heat Sink normal?
NO (0.6V > Measurement < 4.6V)
YES
Is the input
voltage to IC10 MICOM #53
normal?
Recheck the wire connection part
NO
YES
No trouble with PCB and temperature sensor.
Recheck the bad contact of the connector.
☞ Checking method of R Sensor resistance CN30#3(White) ↔ #8(Gray)
-. Compare with the temperature table after
measuring
☞ Checking method of R Sensor voltage.
-. Measure the voltage of Sensor Check Point #1(IC10 MICOM
#53) on PCB or CN30-#3(Red) ↔ REG1, Heat Sink
-. Compare with the temperature table after measuring. Below is
measuring voltage of CN30-#3(Red) ↔ REG1, Heat Sink.
43
Check the Cold solder joint,
short, solder Touch
Common PCB
Ground of REG1, Heat Sink
TROUBLESHOOTING
3) If R DEF Sensor has trouble
ERROR Code
Start
DATA1.
Temperature Table
** Measuring point of resistance value according to
Sensor **
R-DEF : CN30 #4 ↔ #8 Measure the resistance value
** ∞Ω : Short trouble / ∞Ω : Open trouble
Is Main PCB Connector
CN30 inserted correctly?
YES
Is R DEF Sensor unit normal?
Refer to circuit diagram in the manual
Sensor MICOM/Connector Number
Connector
CN30-#4(Orange) and REG1
R DEF
Heat-Sink PCB common Ground
Voltage is measured between 4.6V ~ 0.6V
NO
Bad contact of connector/Insert correctly
NO
Replace the temperature sensor
YES
Is the voltage between
NO (0.6V > Measurement < 4.6V)
Main PCB Connector CN30- #4(Orange) and REG1,
Heat Sink normal?
YES
Voltage of IC10 MICOM #54 is same with the
measuring voltage of CN30-#4(Orange), REG1,&
Heat Sink from PCB common Ground part.
→ Check the measure on MICOM or, Sensor
Marking #2(R303).
Is the input
voltage of IC10 MICOM # 54
normal?
Recheck the wire connection part
NO
YES
No trouble with PCB and temperature sensor
Recheck the bad contact of the connector.
☞ Checking method of R DEF Sensor resistance
CN30-#4(Orange) ↔ #8(Gray)
-. Compare with temperature table after measuring.
☞ Check method of R DEF Sensor voltage
-. Measure the voltage of Sensor Check Point #2(IC10 MICOM
#54) on PCB or CN30-#4(Orange) ↔ REG1, Heat Sink.
-. Compare with temperature table after measuring.
Below is the measuring voltage of CN30-"4"(Orange) ↔ REG1, Heat Sink
44
Check the Cold solder joint,
short, solder Touch
Common PCB
Ground of REG1 Heat Sink
TROUBLESHOOTING
4) If Ambient Sensor has trouble
ERROR Code
Start
DATA1.
Temperature table
** Measuring point of resistance value according to
Sensor **
Ambient : CN31#1 ↔ #3 Measure the resistance value
** Placed in the right top table of upper hinge.
** ∞Ω : Short trouble / ∞Ω : Open trouble
Is Main PCB
Connector CN31 inserted
correctly?
YES
Is Ambient Sensor unit normal?
Refer to circuit diagram in the manual
Sensor MICOM/Connector number
Connector
CN31-#1(White) and REG1
Ambient
Heat-Sink PCB common Ground
Voltage measured between 4.6V ~ 0.6V.
NO
Bad contact of connector/Insert correctly
NO
Replace the temperature sensor
YES
Is the voltage between
Main PCB Connector CN31-#1(White) and REG1,
Heat Sink normal?
NO (0.6V > Measurement < 4.6V)
YES
Voltage of IC10 MICOM #59 is same with the
measuring voltage of CN31-#1(White), REG1, &
Heat Sink from PCB common Ground part.
→ Check the measure on the MICOM or, Sensor
Marking #5(R309).
Is the input
voltage of IC10 MICOM #59
normal?
Recheck the wiring connection
NO
YES
No trouble with PCB and temperature sensor.
Recheck the bad contact of the connector.
☞ Checking method of Ambient Sensor resistance
CN31-#1(White) ↔ #3(White)
-. Compare with the temperature table after
measuring.
☞ Checking method of Ambient Sensor voltage
-. Measure the voltage of Sensor Check Point #5(IC10 MICOM
#59) on PCB or CN31-"1"(White) ↔ REG1, Heat Sink.
-. Compare with the temperature table after measuring.
Below is the measuring voltage of CN31- #"1(White) ↔ REG1, Heat Sink
45
Check the Cold solder joint, short,
solder touch.
Common PCB
Ground of REG1 Heater Sink
TROUBLESHOOTING
5) If F Sensor has trouble
ERROR Code
Start
DATA1.
Temperature table
** Measuring point of resistance value according to
Sensor **
F : CN30 #5 ↔ #8 Measure the resistance value
** ∞Ω : Short trouble / ∞Ω : Open trouble
Is Main PCB Connector
CN30 inserted correctly?
YES
Is F Sensor unit normal?
Refer to circuit diagram in the manual
Sensor MICOM/Connector number
Connector
CN30-#5(Yellow) and
F
REG1 Heat-Sink PCB common Ground
Voltage is measure between 4.6V ~ 0.6V
Voltage of IC10 MICOM #57 is same with the
measuring voltage of CN31-"5"(Yellow), REG1, &
Heat Sink from PCB common Ground part.
→ Check the measure on MICOM or, Sensor
Marking #3(R305).
NO
BAd contact of connector / Insert correctly
NO
Replace temperature sensor
YES
Is the voltage between
Main PCB Connector CN30-#5(Yellow) and REG1,
Heat Sink normal?
NO (0.6V > Measurement < 4.6V)
YES
Is the input voltage of
IC10 MICOM #57 normal?
Recheck the wiring connection
NO
YES
No trouble with PCB and temperature sensor.
Recheck the bad contact of the connector.
☞ Checking method of F Sensor resistance
CN30-#5(Yellow) ↔ #8(Gray)
-. Compare with the temperature table after
measuring.
☞ Checking method of F Sensor voltage
-. Measure the voltage of Sensor Check Point #3(IC10 MICOM
#57) on PCB or CN30-#5(Yellow) ↔ REG1, Heat Sink.
-. Compare with the temperature table after measuring.
Below is the measuring voltage of CN30-"5"(Yellow) ↔ REG1, Heat Sink.
46
Check Cold solder joint,
Short, solder Touch
common PCB
Ground of REG1 Heater Sink
TROUBLESHOOTING
6) If F DEF Sensor has trouble
ERROR Code
Start
DATA1.
Temperature table
** Measuring point of resistance value according
to Sensor **
F-DEF : CN30 #6 ↔ #8 Measure the resistance value
** ∞Ω : Short trouble / ∞Ω : Open trouble
Is Main PCB Connector
CN30 inserted correctly?
NO
YES
Is F DEF Sensor unit normal?
Refer to circuit diagram in the manual
Bad contact of connector/Insert correctly
NO
Replace temperature sensor
YES
Sensor MICOM/Connector number
Connector
CN30-#6(Pink) and REG1
F DEF Heat-Sink PCB
commonGround
Voltage is measured between 4.6V ~ 0.6V
Is the voltage between
Main PCB Connector CN30-#6(Pink) and REG1,
Heat Sink normal?
Voltage of IC10 MICOM #58 is same with the
measuring voltage of CN30-"6"(Pink) and REG1,
& Heat Sink from PCB common Ground part.
→ Check the measure on MICOM or, Sensor
Marking #4(R307).
Is the input voltage of IC10
MICOM #58 normal?
NO (0.6V > Measurement < 4.6V)
YES
Check the wiring connection.
NO
YES
No trouble with PCB and temperature sensor.
Recheck the bad contact of the connector.
☞ Checking method of F DEF Sensor resistance
CN30-#6(Pink) ↔ #8(Gray)
-. Compare with the temperature table after
measuring.
☞ Checking method of F DEF Sensor voltage
-. Measure the voltage of Sensor Check Point #4(IC10 MICOM
#58) on PCB or CN30-"6"(Pink) ↔ REG1, Heat Sink.
-. Compare with the temperature table after measuring.
Below is the measuring voltage of CN30-"6"(Pink) ↔REG1, Heat Sink
47
Check Cold solder joint,
Short, Solder Touch
Common PCB
Ground of REG1 Heater Sink
TROUBLESHOOTING
4-2-2. If FAN does not operate (F, R, C - FAN)
-. The refrigerator of this model has BLDC FAN moror. BLDC motor is driven by DC 7~12V.
-. On the normal condition of COMP ON, it operates together with F-FAN motor.
If door is opened and closed once at a high ambient temperature, it will be operated after 1 minute delay.
Therefore, you are advised not to taken it for an error.
-. If there is a trouble, you should select the self-diagnostic function to check the trouble before power off.
Start
Is the external temperature above
66.2 ℉(19℃ )?
Is COMPRESSOR
ON?
Execute manual
operation
Is the voltage between Main
PCB REG1 Heater Sink and CN76 #4(Orange) around DC7~12V?
Is the voltage between Main
PCB REG1 Heater Sink and CN76
-#6(Brown) around DC7~12V?
Is the voltage between Main
PCB REG1 Heater Sink and CN76
-#5(Red) around DC7~12V?
FAN works normally
Is the external temperature
above 66.2℉(19℃)?
Is the voltage between
Main PCB REG1 Heater Sink and
CN30-#2 (Brown) around 0V?
Is the voltage between Main
PCB REG1 Heater Sink and CN30#1 (Black) around 0V?
Repair the connection
of Door S/W
Recheck after 5 minutes
(Time could be delayed
depending on the
temperature).
If the temperature is
lower, it may not operate.
; about59℉(below15℃)
Door
Close
Open
Does DC7~12V alternate with below
DC 2V between Main PCB REG1 Heater
Sink and CN76-#4 (Orange)?
Door & MICOM State
F
R MICOM (#52)
MICOM
(#60)
0V(High)
5V(Low)
Power ON with 5 minutes
delay after power OFF.
(For preventing the over
load of compressor)
0V(Low)
5V(High)
Does DC7~12V alternate with below
DC2V between Main PCB REG1 Heater
Sink and CN76-#5(Red)?
When initial power is applied to
appliance, the compressor and fans
of fridge/freezer/compressor operate.
If freezer temperature is sensed 41℉
by momentary power failure, fans will
operate after 5minutes.
Does DC7~12V alternate with below
DC2V between Main PCB REG1 Heater
Sink and CN76-#5(Red)?
Replace or repair Main PCB
F FAN pulse voltage
CN76- #2(Pink)
Common PCB Ground
REG1 Heater Sink
The voltage is measured around 2~3V with
multi-meter, though the voltage is changed
because of pulse signal.
☞ Display for checking the self-diagnostic function
R FAN ERROR
F FAN ERROR
Reference
The pulse signal generated when motor rotates will be inputted into CN76#2(F),#3(R),#1(C). These signals will be inputted into MICOM. If signals
are not inputted during motor operating, the fan is turned OFF and ON
again after 10 seconds. But if signals are not still entered, above operation
is repeated for 4 times more. If signals are not entered continuously, the
motor is restarted after 10 seconds. This function is effective when the
normal operation of motor is locked by foreign matters such as ice.
◆ Expected causes
① FAN-MOTOR has failure itself.
② Check the bad contact of wiring
connection.
③ Check the input of the motor
rotation pulse when fan motor
operates.
☞ Checking method of R,F,C FAN Motor The voltage of PCB Common PCB
Ground of REG1 Heater Sink
common Ground REG1 Heater Sink and
F FAN ; CN76-#5(Red) shall be less than DC 7~12V.
R FAN ; CN76-#6(Brown) shall be less than DC 7~12V.
C FAN ; CN76-"4"(Orange) shall be less than DC 7~12V.
-. Recheck if resistance values are different after measuring.
1) F-FAN
C FAN ERROR
48
2) R-FAN
3) C-FAN
TROUBLESHOOTING
4-2-3. If Ice Maker does not operate
1. Water is automatically supplied to the Ice Maker by temperature & time and Ice Maker dispenses cubed or
crushed ice.
2. Power is applied to the one end of wires all the time, so be careful when disassembling and shell refer to its
exploded diagram in any case.
3. Ice Maker operation shall be checked after pressing the Ice Maker Test S/W.(Freezer Ice Maker) it is
impossible to check when the power is disengaged.
Start
ERROR Code
Does Ice Maker
perform the self-diagnostic function
for sensing its location?
Yes
MICOM(IC10) Operation Status
#46
(Test Switch)
Ready
Operation
5V
0V
Does Ice Maker
rotate when pressing the Ice Maker
Test S/W ?
Is the input voltage of
IC10 MICOM #44 normal?
Half
Return
Ready Rotation Rotation
Rotation Ready
5V
0V
5V
0V
Yes
5V
Is the water supplied
after passing the certain period
of time?
Yes
Does Ice Maker Sensor
unit normal?
Yes
No trouble with PCB and parts
Recheck the bad contact of connector
☞ Checking method of Ice Maker Voltage
The voltage between PCB common Ground REG1 Heater Sink and
1) Test Switch Operation (press selected) ; CN90-#5(Gray) shell be DC 0V.
Test Switch Ready ; CN90-#5(Gray) shell be less than DC 5V.
1)Test Switch Operation
1) Check the wiring connections.
2) Check / Replace Ice Maker
KIT
Yes
Normal
No
MICOM(IC10) Operation Status
#44
No
1)Test Switch Ready
☞ Checking Method of Ice Maker Voltage PCB common Ground REG1 Heater Sink and
2) IC10 MICOM #44 voltage ; Ready(5V) → Rotation(0V) → Half Rotation(5V) → Return(0V) → Ready(5V)
* MICOM #44 voltage is same as Connector CN90-7(Purple).
49
No
1) Check the wiring connections.
2) Check / Replace Ice Maker
KIT
3) Check / Replace Main PCB
No
1) Check / Replace Water Valve
* Refer to the operation
condition of Water Valve
No
1) Check / Repair Ice Maker
Sensor
* Refer to the solution "If Ice
Maker Sensor has trouble"
Common PCB
Ground of REG1 Heater Sink
TROUBLESHOOTING
4-2-4. If defrost does not operate (F, R DEF Heater)
- If defrost has trouble, select the self-diagnostic function to detect the error of defrost heater before Power off. (Check the
function with referring to the self-diagnostic function)
R DEF ERROR
F DEF ERROR
** Measuring point of defrost value according to Heater **
F-DEF : CN72 #7(Brown) ↔ #3(Orange)
measure the resistance value(66/240 ohm ± 10%)
R-DEF : CN72 #5(White) ↔ #3(Orange)
measure the resistance value(103(120)/397ohm ± 10%)
** 0Ω : Short trouble / 0Ω: Open(Bimetal, heater) trouble
** Measuring point of resistance value according to Sensor **
F-DEF : CN30 #6 ↔ #8 measure the resistance value
R-DEF : CN30 #4 ↔ #8 measure the resistance value
** 0Ω : Short trouble /0Ω : Open trouble
Resistance value of sensor according to temperature
86℉(30℃)
68℉(20℃)
50℉(10℃)
32℉(0℃)
14℉(-10℃)
-4℉(-20℃)
-22℉(-30℃)
4.22㏀
6.05㏀
8.87㏀
13.29㏀
20.42㏀
32.23㏀
52.41㏀
Start
Are all the defrost
heater normal?
Check the bimetal, heater disconnection itself, wiring connection, etc
Is defrost sensor by
self-diagnostic normal?
Refer to self-diagnostic
function in the manual
Refer to DATA1.
Temperature Table for the
detailed temperature.
** Measuring Point of resistance value according to Sensor **
PCB common Ground REG1 Heater Sink and
F-DEF:CN30 #6 (or Sensor Marking #4(R307),
R-DEF:CN30 #4 (or Sensor Marking #2(R303),
measure the resistance value.
** 0V : Short trouble / 5V : Open trouble
Replace and repair the
applicable sensor
Is the temperature
of defrost sensor lower than
53.6℉(12℃)?
Manual defrost of Fridge and
Freezer operate simultaneously.
Manual operation for a certain period of time
If Power Freeze Key + Fridge Key are pressed
simultaneously for 8 seconds and then select any key, 3rd
Test Mode(Manual defrost) will be operated.
Is power applied to
each defrost heaters?
Recheck the applicable sensor which is not
returned.
Does the system
return to cooling operation after heating
for specified time?
Reference
If defrost sensor temperature of fridge & freezer are
higher than 50℉(10℃) & 53.6℉(12℃) by the heating
of heater, heating will be finished and returns to the
cooling operation after making a pause.
☞ Checking method of F,R DEF Heater resistance value.
F DEF ; CN72-#7(Brown) ↔ #3(Orange)
R DEF ; CN72-#5(White) ↔ #3(Orange)
-. Check additionally, if resistance values are different after
the measuring.
1) F DEF Heater
2) R DEF Heater
Normal
Is connection
terminal of Main PCB
part normal?
Repair connection terminal
Check bimetal, heater itself
disconnection, wiring connection,
etc.
Replace failure Relay or replace
PCB Ass'y
50
TROUBLESHOOTING
4-2-5. If Power is not supplied
Caution
At the power of main PCB, AC input power
and a high voltage over DC170V(325V)are
occurred. Please take care of yourself on
repair and measurement.
Start
- Refer to function and 'reference'
parts in the manual when
checking Main PCB
Common PCB Ground
REG1 Heater Sink
Input Voltage
115V ± 15%
Is plug connected in ?
Connect plug again, & check the plug
loosening.
Is Fuse
on the SMPS PCB
normal?
Check in SMPS part
☞ Checking method of voltage SMPS input ;
VAR1 both terminals, or CN10 both terminal
AC power.
1) Change FUSE AC 250V 2.0A
2) Replace PCB ASS'Y
Is 115V
applied to both terminals of
SMPS power VAR1 ?
Is DC 170V
applied to both terminals of
BD101 +,-?
☞ Checking method of DC secondary output voltage
REG1 input ; Regulator 7805 input → Same
wih C111 both terminals.
DC 12.0V ± 0.8V
Is 12V applied to
both terminal of C111?
Check the assembly and connection of
wire
1) Check PCB PATTERN and replace
BD1
2) Replace PCB ASS'Y
Replace PCB ASS'Y
Is 5V
applied to both terminal of
C113?
Does
Panel PCB operates
normally?
☞ Checking method of DC secondary output voltage
REG1 input ; Regulator 7805 input → Same
with C113 both terminals.
DC 5V ± 0.5V
1) Check REG1 (KA7805)
2) Replace PCB ASS'Y
1) Check & repair the assembly of wire
2) Replace Panel PCB
Is the load
such as relay
normal?
Is there any
PCB soldering, Short, or
breakage?
1) Check the contact of Lead Wire
2) Replace the applicable Relay
(Replace PCB Main)
1) Solder again
2) Replace PCB Main
- Check Main PCB connection
- Check the connections between
upper hinge Cabi-Door
- Check Door Panel PCB connection
Normal (Recheck)
51
TROUBLESHOOTING
4-2-6. If compressor does not operate
Preliminary Inspection
"Check the compressor with selecting the manual operation"
1. Compressor does not work, unless 5mins pass after satisfying the temperature.
2. Compressor does not work during defrosting.
3. Compressor does not work because it sensing low temperature, unless the fridge & freeze sensor is connected.
Start
Did 5mins
pass after Compressor
Off?
No
Yes
Refer to test function in the manual
Did buzzer of manual operation sound?
(Check certainly after manual operation)
Check Cold solder joint / Replace PCB
Does
compressor work with manual
operation?
Check after 5 mins
Yes
No
Normal
Is
IC10 MICOM #28 hight?
(5V)
Yes
1) Change IC71 Driver IC (TD62083AP)
2) Replace PCB
Is
IC71 #13 about
0.7V?
Yes
Refer to the circuit diagram in the manual
Is
CN72 connector
normal?
NO
Yes
Is
COMP ASS'Y
normal?
Check bad contact of connector
NO
Yes
Replace / Repair COMP ASS'Y
Normal (Recheck)
☞ Checking method of voltage
PCB common Ground REG1 Heater Sink and
1) IC10 MICOM #28 ; Voltage is high
(5V ±0.5V) when compressor is working.
☞ Checking method of voltage
PCB common Ground REG1 Heater Sink and
1) IC71 #13 ; Voltage is Low (0.7V) when
compressor is working.
52
Common PCB Ground
REG1 Heater Sink
TROUBLESHOOTING
4-2-7. If alarm sounds continuously without stop (Related with buzzer sound)
Preliminary Inspection
1. The alarm of freezer / fridge will sound(Ding-dong) after 2minutes from initial door open, and it keeps sounding(ding-dong)
at 1 minutes intervals when opening afterward.
2. The alarm sounds because MICOM sense as door-open when door is not pressed completely. So refrigerator inner lamp
will be OFF after 10minutes from sensing door-open. In this case, the inner lamp will not ON though the door is opened
actually.
① If 'ding-dong' sounds continuously.
Start
Is door closed
completely?
Is water
penetrated into the door
switch?
Remove the cause after comprehending
the conditions of interference by door
gasket, food, etc.
Replace door switch
Door & MICOM State
Door
F
MICOM(#60)
R
MICOM(#52)
Close
0V(Low)
0V(Low)
Open
5V(High)
5V(High)
Is input
voltage of Main #60 & #52
changed at door-open &
door-close?
Is the
connector(CN30) inserted
correctly?
Repair the trouble of wire connection
and door switch
Repair the bad inserting of connector
and bad contact.
Separate the door switch and check if the measured
Ω to œΩaccording to
value of unit is changed from 0Ω
switch On/OFF.
* Fridge Door Switch is magnetic switch. (It can be
operated when door magnet is combined)
Is Door
S/W itself(unit)
normal?
Replace door switch
Recheck
Main PCB & Door switch
② If 'beep-beep' sounds continuously.
Start
Is manual
operation / defrost
selected?
Cancel the manual operation / defrost
function.
Does buzzer
sound when Power On
again?
Normal
Replace PBA Main Test
part, Solder Touch, &
Main PCB
53
TROUBLESHOOTING
③ If buzzer does not sound
If buzzer does not sounds when button is pressed, manual operation is started, or door is opened,
separate Main PCB and then check the breakage of buzzer, bad soldering, etc.
(It is recommended to replace Main PCB when the failure of parts is occurred after checking.)
Start
Does it sound
'Dingdong' if press a button
on the frontpanel?
Main PCB is normal & BUZZER is
normal
Does it make
a sound of 'Door Open'
alarm when opening the door of
freezer or fridge more than
2 minutes?
Check the panel PCB with referring
"How to check Panel Display"
Check if the lead of component is
fallen from the vibration plate of
Buzzer or not.
Is the breakage
or damage of the buzzer
in the Main PCB?
Replace Main PCB
Recheck the button pressing force and
mechanical problem
54
TROUBLESHOOTING
4-2-8. If Panel PCB does not work normally
① When lightning of Panel PCB is disabled
Start
Check parts trouble, fallen PCB Pattern, Solder
connection of parts
Is the PANEL PCB
normal?
Yes
Is the
connector of PANEL PCB part
inserted correctly?
Yes
Is the
connector of upper hinge COVER
inserted correctly?
Yes
· Check the connecting part of left/right CABI
upper hinge according to left/right opening of
door.
· Check the connecting part of left/right door
upper hinge according to left/right opening
door.
Is
Main PCB connector(CN50)
inserted correctly?
Yes
Is Main PCB 12V normal?
(Check the power)
Yes
No
Replace PANEL PCB
Yes
Reinsert connector of PANEL
PCB and check the bad contact.
Yes
Reinsert connector and check
the bad contact.
No
Reinsert the connector of Main
PCB and check the bad contact.
No
Replace PCB
No problem / Recheck
① Door Part - Check the connecting wire of upper hinge Panel - Check the disconnection & short between wires.
② Freezer upper CABI - Check the wires between Main PCB - Check the disconnection & short between wires.
55
TROUBLESHOOTING
② If Panel PCB Key is not selected
Start
Is Panel PCB connector
inserted correctly?
No
Reinsert the connector and
check the bad contact.
No
Are any keys are
pressed from 6 of keys?
No
Reassemble the Panel PCB
Cover
Yes
Is connector of
upper hinge cover inserted
correctly?
No
Reinsert the connector and
check the bad contact.
Yes
Is Main PCB
connector(CN50) inserted
correctly?
No
Reinsert the Main PCB
connector/ Replace
Yes
Replace PANEL PCB
56
TROUBLESHOOTING
4-2-9. If refrigerator Room Lamp does not light up (F,R - Same condition)
1. When you replace the lamp of freezer/fridge, please power off/unplug AC Cord to avoid an electric shock.
2. Please keep in mind you could get burnt by the excessive heating of an incandescent light bulb.
3. Bimetal is installed in the refrigerator Lamp. Check that if Lamp may be OFF by bimetal. (It may be deleted per model.)
① When lightning of Panel PCB is disabled
Start
Door & MICOM State
Door
F
MICOM(#60)
R
MICOM(#52)
Close
0V(Low)
0V(Low)
Open
5V(High)
5V(High)
Is the Door switch
contact normal?
Yes
Is the inner lamp
filament cut?
No
Replace Door S/W
No
Replace the inside lamp
No
Applied to the model using bimetal only. (Option)
Is Lamp OFF by
bimetal operating?
Yes
No
Wait for returning time of bimetal
Preliminary Inspection
· The inner lamp relay operates lighting/
lights-out according to door open/close.
· If inner lamp does not light, check the
noise of relay operation.
· Noise of relay operation sounds every
Door Open / Close.
· F-LAMP Relay -- RY75
· R-LAMP Relay -- RY76
Is the control
relay of the inner lamp in PCB?
(RY76)
Yes
Check the connection of RDoor switch and
check & repair the inner lamp socket.
No
1) Replace PCB
(Expected trouble)
-. IC71(#15, #16)
-. IC10(#31, #32)
-. Relay(RY75,RY76)
2) Bad connection of wire
-. CN71("5" Pink, "3" Blue
Preliminary Inspection
If the door is opened, the contact of door switch will be opened and MICOM will get applied 5V and finally it senses the door open.
If it sense 5V for more 2 minutes afterward, Door-open alarm will sound "Ding-Dong" for 10 seconds in 1 minute cycle.
Therefore,if the door switch has failure, the refrigerator can make a "Ding-Dong" sound per 1minute cycle. Please refer this for its service.
☞ When measure the lamp resistance to the wire, → Resistance can be changed
by Lamp input voltage.
(Below is the actual measurement and the valued can be changed by function.)
☞ Fridge Lamp(Option)
CN72-#9(Red) ↔ CN71#3(Blue)
; 27Ohm± 10%
Lamp ; 40W (Basis on 120V)
☞ Freeze Lamp
CN72-#9(Red) ↔ CN71#5(Pink)
; 25Ohm± 10%
Lamp ; 40W(Basis on120V)
57
☞ Checking method of Door Switch voltage
-. PCB common Ground REG1 Heater Sink and
CN30-"2"(Brown) : measure the voltage (R Door Switch)
CN30-"1"(Black) : measure the voltage (F Door Switch)
=> See the R DOOR Switch at the following picture
CLOSE
OPEN
Common PCB Ground
REG1 Heater Sink
TROUBLESHOOTING
4-2-10. No water supply to the ice maker.
Preliminary Inspection
1. Water supplies directly to water valve. Please shut off the water supplying prior to repair.
2. Power is applied to the one end of wires. Be careful when disassembling not to get an electric shock.
3. To check the Ice Water Valve operation, shall press the Ice Maker Test switch and then check the operation.
(Ice Maker in freezer)
Common PCB Ground
REG1 Heater Sink
Start
☞ Checking method of voltage
Based on PCB common Ground REG1 Heater Sink
1) Check the voltage of IC71 #5 (Same voltage as IC10 #30)
-.when Ice Water valve operating (About 5V±0.5V)
Is the confirming
sound of valve operation heard after pressing
the Ice Maker Test switch?
No
Does
Main PCB IC10 MICOM #30 have
HIGH(5V) output?
Based on PCB common Ground REG1 Heater Sink
2) IC71 #14 voltage
-.When Ice Water valve waiting (About 12V±0.7V)
-.When Ice Water valve waiting (About 0.7V±0.5V)
No
Does
Main PCB IC71 #14 have about 0.7V
output?
Yes
3) Check the voltage of Ice Water Valve operation (AC Voltage)
=> For checking Relay RY74 operation.
CN72-#9(Red) ↔ CN71-#9(Purple)
-.When Ice Water valve waiting (About AC 0V)
-.When Ice Water valve operating (About AC 115V± 20%)
Is Main PCB RELAY
RY74 contact normal?
Yes
Main PCB normal
-- Need to check the other parts
① Check the wire between Ice Water Valve ↔ Main
PCB
② Ice Water Valve itself has trouble or bad contact
of connector.
③ Check the connection hose
Yes
Normal (Check Ice Water Valve
connecting hose)
No
Check Cold solder joint Short/
Replace PCB
No
Check Cold solder joint Short/
Replace PCB
No
Check Cold solder joint Short/
Replace PCB
5 . EXPLODED VIEW& PARTS LIST
5-1) Freezer
1-5
1-4
1
1-3
1-5
1-4
1-2
1-1
2
7
2-3 2-2
9
3
4
8
6
5
2-1 10
13
10-3
11
12
10-1
10-2
12-3
15
12-2
12-1
14
16
16-3
16-2
16-1
16-6
16-4
59
16-5
16-8
16-7
16-9
EXPLODED VIEW& PARTS LIST
■ Parts List of Freezer (RF217AB)
NO
CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
2
2-1
2-2
2-3
3
4
5
6
7
8
9
10
10-1
10-2
10-3
11
12
12-1
12-2
12-3
13
14
15
16
16-1
16-2
16-3
16-4
16-5
16-6
16-7
16-8
16-9
DA97-06669A
DA63-04455A
DA63-04456A
DA63-04457A
DA66-10104A
DA71-20145A
DA90-04793A
DA61-03189A
DA67-01231A
DA63-05155A
DA96-00480A
DA60-90005A
DA61-02901A
DA61-04462A
DA47-00243C
DA63-04296A
4713-001206
DA97-06703A
DA61-04464A
DA61-04512A
DA66-00436A
DA61-04507A
DA97-06702A
DA61-04465A
DA61-04513A
DA66-00435A
DA61-04506A
DA63-04447A
DA61-05425A
DA97-06657A
DA63-04444A
DA62-01942A
DA61-04461A
DA63-01809A
DA31-00124A
DA61-03183A
DA63-01808A
DA31-00146H
DA63-01146A
ASSY TRAY-FRE UPP
COVER-TRAY FRE UPP A
COVER-TRAY FRE UPP B
TRAY-FRE UPP
ROLLER-FRE
FIXER-ROLLER
ASSY ICE MAKER
CASE-ICE CUBE
SCOOP ICE
TRAY-CASE ICE CUBE
ASSY EVAP-FRE
RIVET-AVEX
FIXER-SENSOR EVAP
PLATE-DRAIN FRE
THERMO BIMETAL-PROTECTOR
COVER LAMP-FRE
LAMP-INCANDESCENT
ASSY RAIL-SLIDE LOW L
HANGER-RAIL LOW L
RAIL-SLIDE LOW L
GEAR-L
SUPPORT-RAIL LOW L
ASSY RAIL-SLIDE LOW R
HANGER-RAIL LOW R
RAIL-SLIDE LOW R
GEAR-R
SUPPORT-RAIL LOW R
TRAY-DRAWER BOX
GUIDE-DRAWER BOX
ASSY COVER-EVAP FRE
COVER-EVAP FRE
INSULATION-EVAP FRE
PLATE-INS EVAP FRE
COVER MOTOR-BLDC
FAN-AX100W4CC-T1
CASE-MOTOR FRE
GROMMET-MOTOR,FRONT
MOTOR BLDC
GROMMET-MOTOR,REAR
SPEC
NW2-PJT,-,-,-,-,21CU ft
NW2-PJT,HIPS,-,-,-,-,-,COOL WHT,NW2-PJT,GPPS,-,-,-,-,-,-,NW2-PJT,HIPS,-,-,-,-,COOL WHT,21INCH
POM,-,-,D22,-,-,
61BU
NW2,AUTO ICE MAKER,-,-,-,AW-PJT,PP,-,-,-,COOL WHITE,W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,AW2-CD,LDPE,NTR
NW2-PJT,-,-,-,-,-,-,115V/240W,AL,D3.2,L9.83,-,CORE-PJT,PP,-,NTR,NW2-PJT,GALVANUME,T0.3,-,516,-,AW-PJT(R),BT-121-M, PW-5M1N
AW2,PC,-,-,-,-,-,Transparent,120V,340mA,40W,FROST,-,-,NW2-PJT,-,-,-,-,21Cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2-PJT,STS304,-,-,431,-,21Cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,21CU ft
NW2-PJT,-,-,-,-,21Cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2-PJT,STS304,-,-,431,-,21Cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,21CU ft
NW2-PJT,PP,-,-,-,-,COOL WHITE,21INCH
NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
NW2-PJT,-,-,-,-,-,-,-,NW2-PJT,PP,-,-,-,-,-,COOL WHT,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,GALVALUME,T0.3,-,-,-,BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
-,TD-PJT,ABS,-,AW-PJT,BUBBLE PP,-,-,-,NTR,BLDC,NBR,BLACK,-,-,-,-,-,H20
-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
60
QUAN
TITY
1
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REMARK
RI242
RI064
RI062
RI064
RW648
RH029
RM001
RM012
RI247
RF011
RI157
RF026
RI074
RF031
RI081
RI171
RD094
RI184
RI242
RI173
RD095
RI185
RI242
RI237
RF005
RF005
RI232
RF092
RF083
RI085
RF120
RO137
RI089
RO138
■ Parts List of Freezer (RF197AB)
NO
CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
2
2-1
2-2
2-3
3
4
5
6
7
8
9
10
10-1
10-2
10-3
11
12
12-1
12-2
12-3
13
14
15
16
16-1
16-2
16-3
16-4
16-5
16-6
16-7
16-8
16-9
DA97-06669A
DA63-04455A
DA63-04456A
DA63-04457A
DA66-10104A
DA71-20145A
DA90-04793A
DA61-03189A
DA67-01231A
DA63-05155A
DA96-00480A
DA60-90005A
DA61-02901A
DA61-04462A
DA47-00243C
DA63-04296A
4713-001206
DA97-06703A
DA61-04464A
DA61-04512A
DA66-00436A
DA61-04507A
DA97-06702A
DA61-04465A
DA61-04513A
DA66-00435A
DA61-04506A
DA63-04447A
DA61-05425A
DA97-06657A
DA63-04444A
DA62-01942A
DA61-04461A
DA63-01809A
DA31-00124A
DA61-03183A
DA63-01808A
DA31-00146H
DA63-01146A
ASSY TRAY-FRE UPP
COVER-TRAY FRE UPP A
COVER-TRAY FRE UPP B
TRAY-FRE UPP
ROLLER-FRE
FIXER-ROLLER
ASSY ICE MAKER
CASE-ICE CUBE
SCOOP ICE
TRAY-CASE ICE CUBE
ASSY EVAP-FRE
RIVET-AVEX
FIXER-SENSOR EVAP
PLATE-DRAIN FRE
THERMO BIMETAL-PROTECTOR
COVER LAMP-FRE
LAMP-INCANDESCENT
ASSY RAIL-SLIDE LOW L
HANGER-RAIL LOW L
RAIL-SLIDE LOW L
GEAR-L
SUPPORT-RAIL LOW L
ASSY RAIL-SLIDE LOW R
HANGER-RAIL LOW R
RAIL-SLIDE LOW R
GEAR-R
SUPPORT-RAIL LOW R
TRAY-DRAWER BOX
GUIDE-DRAWER BOX
ASSY COVER-EVAP FRE
COVER-EVAP FRE
INSULATION-EVAP FRE
PLATE-INS EVAP FRE
COVER MOTOR-BLDC
FAN-AX100W4CC-T1
CASE-MOTOR FRE
GROMMET-MOTOR,FRONT
MOTOR BLDC
GROMMET-MOTOR,REAR
SPEC
NW2-PJT,-,-,-,-,21CU ft
NW2-PJT,HIPS,-,-,-,-,-,COOL WHT,NW2-PJT,GPPS,-,-,-,-,-,-,NW2-PJT,HIPS,-,-,-,-,COOL WHT,21INCH
POM,-,-,D22,-,-,
61BU
NW2,AUTO ICE MAKER,-,-,-,AW-PJT,PP,-,-,-,COOL WHITE,W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,AW2-CD,LDPE,NTR
NW2-PJT,-,-,-,-,-,-,115V/240W,AL,D3.2,L9.83,-,CORE-PJT,PP,-,NTR,NW2-PJT,GALVANUME,T0.3,-,516,-,AW-PJT(R),BT-121-M, PW-5M1N
AW2,PC,-,-,-,-,-,Transparent,120V,340mA,40W,FROST,-,-,NW2-PJT,-,-,-,-,21Cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2-PJT,STS304,-,-,431,-,21Cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,21CU ft
NW2-PJT,-,-,-,-,21Cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2-PJT,STS304,-,-,431,-,21Cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,21CU ft
NW2-PJT,PP,-,-,-,-,COOL WHITE,21INCH
NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
NW2-PJT,-,-,-,-,-,-,-,NW2-PJT,PP,-,-,-,-,-,COOL WHT,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,GALVALUME,T0.3,-,-,-,BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
-,TD-PJT,ABS,-,AW-PJT,BUBBLE PP,-,-,-,NTR,BLDC,NBR,BLACK,-,-,-,-,-,H20
-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
61
QUAN
TITY
1
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REMARK
RI242
RI064
RI062
RI064
RW648
RH029
RM001
RM012
RI247
RF011
RI157
RF026
RI074
RF031
RI081
RI171
RD094
RI184
RI242
RI173
RD095
RI185
RI242
RI237
RF005
RF005
RI232
RF092
RF083
RI085
RF120
RO137
RI089
RO138
EXPLODED VIEW& PARTS LIST
5-2) Refrigerator
2
1
1-1
2-1
9
1-2
2-2
8
13
4
4-1
1-3
1-4
4-2
1-5
1-6
1-6
3
6
3-1
6-1
7
3-2
6-2
7-1
7-2
10
5-2
10-5
10-4
10-2
10-3
5
10
5-1
10-5
10-4
10-5
10-4
10-1
10-2
10-3
10-5
10-4
12
10-1
12-5
12-8
12-2
12-1
11-17
11-1
11-15
11-6
11-4
11-7
11-11
11-12
11-16
11-21
11-2
11-3
11-18
11-5
12-4
11-9
11
11-13
12-6
11-10
11-8
11-20
62
11-19
12-9
12-7
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF217AB)
NO CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
1-6
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
5
5-1
5-2
6
6-1
6-2
7
7-1
7-2
8
9
10
10-1
10-2
10-3
10-4
10-5
11
11-1
11-2
11-3
11-4
11-5
11-6
11-7
11-8
11-9
11-10
11-11
11-12
11-13
11-14
11-15
11-16
11-17
11-18
DA97-06686A
DA64-02645A
DA64-02647A
DA61-04511A
DA61-04510A
DA61-04505A
DA63-00202A
DA97-06674A
DA63-04464A
DA63-04465A
DA97-06675A
DA64-02645A
DA64-02647A
DA97-00663D
DA64-00448B
DA67-01807H
DA97-07058A
DA61-00760B
DA61-04875A
DA97-00103N
DA61-60126E
DA63-40006A
DA97-00103P
DA61-60127E
DA63-40006A
DA63-04549A
4713-001206
DA97-06700A
DA61-00762A
DA63-04445A
DA64-00656A
DA66-10104A
DA71-20145A
DA97-06656A
6002-000213
6002-000215
DA31-00124A
DA31-00146H
DA32-10105X
DA61-03181A
DA61-03182A
DA61-04701A
DA61-03599A
DA61-20128A
DA62-01383A
DA62-01423A
DA62-01941A
DA62-01969A
DA63-01146A
DA63-01808A
DA63-01809A
DA63-04439A
ASSY SHELF-REF UPP
TRIM SHELF-REF
GLASS-SHELF
SUPPORT-GUIDE RAIL FRONT
SUPPORT-GUIDE RAIL REAR
GUIDE-RAIL
GROMMET-RAIL
ASSY TRAY-CHILLED ROOM
TRAY CHIL ROOM
COVER-TRAY CHIL ROOM
ASSY SHELF-TRIM REF MID
TRIM SHELF-REF
GLASS-SHELF
ASSY COVER-VEG
TRIM-COVER VEG
SHELF-GLASS
ASSY RAIL VEG-MID
RAIL-VEG, MID
SUPPORT-RAIL VEG
ASSY RAIL-VEG, L
RAIL-VEG
GROMMET
ASSY RAIL-VEG, R
RAIL-VEG
GROMMET
COVER LAMP-REF
LAMP-INCANDESCENT
ASSY CASE-VEG REF
CASE-VEG,REF
COVER-VEG REF
KNOB-HUMIDITY
ROLLER-FRE
FIXER-ROLLER
ASSY COVER-EVAP REF
SCREW-TAPPING
SCREW-TAPPING
FAN-AX100W4CC-T1
MOTOR BLDC
SENSOR TEMP
CASE-MOTOR REF
GUIDE-INS EVAP REF
PLATE-INS EVAP REF
PLATE-HOUSING REF
SPRING ETC-FAN
INSULATION-EVAP SUB
INSULATION-EVAP DUCT
INSULATION-EVAP REF
INSULATION-EVAP REAR
GROMMET-MOTOR,REAR
GROMMET-MOTOR,FRONT
COVER MOTOR-BLDC
COVER-EVAP REF
SPEC
QUAN
TITY
NW2,19cu.ft
NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,-,NY-6,-,-,-,-,-,-,NW2,-,-,-,-,19cu.ft
NW2,GPPS,-,-,-,-,-,NW2,HIPS,-,-,-,-,-,COOL WHITE,NW2,NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
W2-PJT(55),ABS,-,T2.5,L403,W717,cool white
W2-PJT(55), GLASS,T5,W708.5,L346,-,COVER-VEG
NW2,-,-,-,-,21Cu.ft
W2-PJT(55),ABS,T2.5,-,-,COOL-WHITE,SC-02740R
NW2,PP(BJ-730),-,-,-,COOL WHITE,W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,LEFT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,RIGHT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
NW2,PC,-,-,-,-,-,NTR,PT-1020
120V,340mA,40W,FROST,-,-,NW2-PJT,-,-,-,-,W2-PJT(55),HIPS,-,-,-,WHITE,HG-1760
NW2-PJT,SAN,-,-,-,-,-,NATURAL,W2-PJT,ABS,-,-,-,-,W9540,-,BEST BYE
POM,-,-,D22,-,-,
-,PA,--,NW2-PJT,-,-,-,-,-,-,-,TWIN COOLING
TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,-,TD-PJT,ABS,-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,PX-41C,QUEEN PJT,-10,5V,-,-,F-SENSOR,YELLOW
AW-PJT,BUBBLE PP,-,-,-,NTR,AW-PJT,ABS,-,-,-,NTR,NW2,SAZCC,T3.0,-,-,-,AW-PJT,GALVALUME,T0.3,-,-,-,-,STS304,PI7.8,-,OD1.0,-,-,-,-,-,FD
AW-PJT,FOAM-PS,-,-,-,-,-,-,AW-PJT,FOAM-PS,T20,W44.5,L45,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
BLDC,NBR,BLACK,-,-,-,-,-,H20
BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
NW2-PJT,PP,-,-,-,-,-,COOL WHT,-
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
3
4
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
63
REMARK
RI041
RI079
RI037
RI088
RI018
RI018
RI079
RI037
RI997
RI091
RF183
RI030
RI028
RI028
RW374
RI029
RI028
RW374
RI081
RI999
RI999
RI010
RW508
RW648
RH029
RS047
RS080
RI085
RI089
RQ684
RF121
RI210
RI307
RW716
RI232
RI236
RI231
RI233
RO138
RO137
RF083
RI024
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF217AB)
NO CODE-NO
PART NAME
11-19
11-20
11-21
12
12-1
12-2
12-3
12-4
12-5
12-6
12-7
12-8
12-9
13
DA63-40167A
DA64-02065A
DA96-00042A
DA96-00461C
6501-000123
DA32-00006S
DA47-00243C
DA47-00244B
DA59-00357B
DA60-90005A
DA61-03644A
DA61-03683A
DA61-04148A
DA61-05292A
GROMMET-COVER CHIL
TRIM-COVER EVAP REF
ASSY-HARNESS MOTOR
ASSY EVAP-REF
CABLE TIE
SENSOR TEMP
THERMO BIMETAL-PROTECTOR
HEATER-METAL SHEATH
EVAP REF
RIVET-AVEX
PLATE-EVAP HEATER
FIXER-SENSER
PLATE-DRAIN REF
GUIDE-FRENCH
SPEC
QUAN
TITY
T3.0,SILICON,-,-,-,-,-,-,NTR
AW-PJT,ABS,-,-,-,COOL WHITE,A-TOP UL(MOTOR),C-FAN,350MM
NW2-PJT,PIN,-,-,115V/240W,-,-,-,DACT-140,-,W3.6,L146,NTR,NYLON66
PX-41C, 502AT,AW-PJT,-40~110°…,5V,-,-,R-DEF SENSOR,YEL,400MM
AW-PJT(R),BT-121-M, PW-5M1N,125 / 250V,10 / 5A,60°…,40°…,-,-,100Mߟ,-,-,AW-PJT,-,120W,-,115V,110.2Ω,-,-,R-ROOM
-,-,-,-,-,-,-,-,AW-PJT,AL,D3.2,L9.83,-,AW-PJT,AL,T0.7,-,-,-,AW-PJT,ABS,-,NTR,AW-PJT('08),GALVANUME,T0.3,-,-,-,NW2-FDR,PC-ABS,31.3,95.1,COOL WHITE,SC-02740R
1
1
1
4
1
1
1
1
1
1
1
1
64
1
REMARK
RI087
RI241
RO101
RI016
RF170
RM017
RF026
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF197AB)
NO CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
1-6
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
5
5-1
5-2
6
6-1
6-2
7
7-1
7-2
8
9
10
10-1
10-2
10-3
10-4
10-5
11
11-1
11-2
11-3
11-4
11-5
11-6
11-7
11-8
11-9
11-10
11-11
11-12
11-13
11-14
11-15
11-16
11-17
11-18
DA97-06686A
DA64-02645A
DA64-02647A
DA61-04511A
DA61-04510A
DA61-04505A
DA63-00202A
DA97-06674A
DA63-04464A
DA63-04465A
DA97-06675A
DA64-02645A
DA64-02647A
DA97-00663D
DA64-00448B
DA67-01807H
DA97-07058A
DA61-00760B
DA61-04875A
DA97-00103N
DA61-60126E
DA63-40006A
DA97-00103P
DA61-60127E
DA63-40006A
DA63-04549A
4713-001206
DA97-06700A
DA61-00762A
DA63-04445A
DA64-00656A
DA66-10104A
DA71-20145A
DA97-06656A
6002-000213
6002-000215
DA31-00124A
DA31-00146H
DA32-10105X
DA61-03181A
DA61-03182A
DA61-04701A
DA61-03599A
DA61-20128A
DA62-01383A
DA62-01423A
DA62-01941A
DA62-01969A
DA63-01146A
DA63-01808A
DA63-01809A
DA63-04439A
ASSY SHELF-REF UPP
TRIM SHELF-REF
GLASS-SHELF
SUPPORT-GUIDE RAIL FRONT
SUPPORT-GUIDE RAIL REAR
GUIDE-RAIL
GROMMET-RAIL
ASSY TRAY-CHILLED ROOM
TRAY CHIL ROOM
COVER-TRAY CHIL ROOM
ASSY SHELF-TRIM REF MID
TRIM SHELF-REF
GLASS-SHELF
ASSY COVER-VEG
TRIM-COVER VEG
SHELF-GLASS
ASSY RAIL VEG-MID
RAIL-VEG, MID
SUPPORT-RAIL VEG
ASSY RAIL-VEG, L
RAIL-VEG
GROMMET
ASSY RAIL-VEG, R
RAIL-VEG
GROMMET
COVER LAMP-REF
LAMP-INCANDESCENT
ASSY CASE-VEG REF
CASE-VEG,REF
COVER-VEG REF
KNOB-HUMIDITY
ROLLER-FRE
FIXER-ROLLER
ASSY COVER-EVAP REF
SCREW-TAPPING
SCREW-TAPPING
FAN-AX100W4CC-T1
MOTOR BLDC
SENSOR TEMP
CASE-MOTOR REF
GUIDE-INS EVAP REF
PLATE-INS EVAP REF
PLATE-HOUSING REF
SPRING ETC-FAN
INSULATION-EVAP SUB
INSULATION-EVAP DUCT
INSULATION-EVAP REF
INSULATION-EVAP REAR
GROMMET-MOTOR,REAR
GROMMET-MOTOR,FRONT
COVER MOTOR-BLDC
COVER-EVAP REF
SPEC
QUAN
TITY
NW2,19cu.ft
NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,-,NY-6,-,-,-,-,-,-,NW2,-,-,-,-,19cu.ft
NW2,GPPS,-,-,-,-,-,NW2,HIPS,-,-,-,-,-,COOL WHITE,NW2,NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
W2-PJT(55),ABS,-,T2.5,L403,W717,cool white
W2-PJT(55), GLASS,T5,W708.5,L346,-,COVER-VEG
NW2,-,-,-,-,21Cu.ft
W2-PJT(55),ABS,T2.5,-,-,COOL-WHITE,SC-02740R
NW2,PP(BJ-730),-,-,-,COOL WHITE,W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,LEFT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,RIGHT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
NW2,PC,-,-,-,-,-,NTR,PT-1020
120V,340mA,40W,FROST,-,-,NW2-PJT,-,-,-,-,W2-PJT(55),HIPS,-,-,-,WHITE,HG-1760
NW2-PJT,SAN,-,-,-,-,-,NATURAL,W2-PJT,ABS,-,-,-,-,W9540,-,BEST BYE
POM,-,-,D22,-,-,
-,PA,--,NW2-PJT,-,-,-,-,-,-,-,TWIN COOLING
TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,-,TD-PJT,ABS,-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,PX-41C,QUEEN PJT,-10,5V,-,-,F-SENSOR,YELLOW
AW-PJT,BUBBLE PP,-,-,-,NTR,AW-PJT,ABS,-,-,-,NTR,NW2,SAZCC,T3.0,-,-,-,AW-PJT,GALVALUME,T0.3,-,-,-,-,STS304,PI7.8,-,OD1.0,-,-,-,-,-,FD
AW-PJT,FOAM-PS,-,-,-,-,-,-,AW-PJT,FOAM-PS,T20,W44.5,L45,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
BLDC,NBR,BLACK,-,-,-,-,-,H20
BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
NW2-PJT,PP,-,-,-,-,-,COOL WHT,-
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
3
4
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
65
REMARK
RI041
RI079
RI037
RI088
RI018
RI018
RI079
RI037
RI997
RI091
RF183
RI030
RI028
RI028
RW374
RI029
RI028
RW374
RI081
RI999
RI999
RI010
RW508
RW648
RH029
RS047
RS080
RI085
RI089
RQ684
RF121
RI210
RI307
RW716
RI232
RI236
RI231
RI233
RO138
RO137
RF083
RI024
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF197AB)
NO CODE-NO
PART NAME
11-19
11-20
11-21
12
12-1
12-2
12-3
12-4
12-5
12-6
12-7
12-8
12-9
13
DA63-40167A
DA64-02065A
DA96-00042A
DA96-00461C
6501-000123
DA32-00006S
DA47-00243C
DA47-00244B
DA59-00357B
DA60-90005A
DA61-03644A
DA61-03683A
DA61-04148A
DA61-05292A
GROMMET-COVER CHIL
TRIM-COVER EVAP REF
ASSY-HARNESS MOTOR
ASSY EVAP-REF
CABLE TIE
SENSOR TEMP
THERMO BIMETAL-PROTECTOR
HEATER-METAL SHEATH
EVAP REF
RIVET-AVEX
PLATE-EVAP HEATER
FIXER-SENSER
PLATE-DRAIN REF
GUIDE-FRENCH
SPEC
QUAN
TITY
T3.0,SILICON,-,-,-,-,-,-,NTR
AW-PJT,ABS,-,-,-,COOL WHITE,A-TOP UL(MOTOR),C-FAN,350MM
NW2-PJT,PIN,-,-,115V/240W,-,-,-,DACT-140,-,W3.6,L146,NTR,NYLON66
PX-41C, 502AT,AW-PJT,-40~110°…,5V,-,-,R-DEF SENSOR,YEL,400MM
AW-PJT(R),BT-121-M, PW-5M1N,125 / 250V,10 / 5A,60°…,40°…,-,-,100Mߟ,-,-,AW-PJT,-,120W,-,115V,110.2Ω,-,-,R-ROOM
-,-,-,-,-,-,-,-,AW-PJT,AL,D3.2,L9.83,-,AW-PJT,AL,T0.7,-,-,-,AW-PJT,ABS,-,NTR,AW-PJT('08),GALVANUME,T0.3,-,-,-,NW2-FDR,PC-ABS,31.3,95.1,COOL WHITE,SC-02740R
1
1
1
4
1
1
1
1
1
1
1
1
66
1
REMARK
RI087
RI241
RO101
RI016
RF170
RM017
RF026
EXPLODED VIEW& PARTS LIST
5-3) Cabinet
1
1-5
2
1-4
1-7
2-1
2-2
1-2
1-6
1-3
1-8
1-1
3-1
3-2
3
5
8
10
4
9
4-4
6
4-2
5
4-3
5-2
4-1
5-4
5-1
12
5-3
12-1
7
11
12-3
12-5
12-4
12-4-3
15
12-4-7
12-4-5
15-2
15-1
13
17
12-2
12-4-2 12-4-1
15
16
12-4-4
17
15-2
14
15-1
13-3
14-2
13-1
14-1
13-4
13-2
13-1
67
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF217AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
4-3
4-4
5
5-1
5-2
5-3
5-4
6
7
8
9
10
11
12
12-1
12-2
12-3
12-4
12-4-1
12-4-2
12-4-3
12-4-4
12-4-5
12-4-6
12-5
13
13-1
13-2
13-3
13-4
14
14-1
14-2
DA97-07654A
DA34-00043C
DA41-00635A
DA61-05316A
DA64-02960A
DA61-04052A
DA64-02071A
DA64-02981A
DA96-00571A
DA97-06715B
DA61-04475B
DA63-02527A
DA97-06716B
DA61-04476B
DA63-02527A
DA97-07514A
DA61-04916D
DA66-00444A
6011-001442
DA63-04694A
DA97-07515A
DA61-04917D
DA66-00444A
6011-001442
DA63-04694A
DA63-02905A
DA97-07835A
DA60-20008A
DA63-01866A
DA97-04049A
DA62-01514A
DA97-07655A
DA62-00954A
DA63-04466A
DA97-07653A
DA97-03145L
DA31-00146B
DA61-02349B
DA61-02355B
DA63-01146A
DA63-40167A
DA96-00042A
DA31-00010D
DA97-06815B
DA66-00649A
DA61-04703A
DA64-02694A
DA71-50240A
DA97-07836B
DA63-05106B
DA67-02071B
ASSY-TOP TABLE
SWITCH REED-ASS'Y
PBA PANEL
CASE-PBA DISPLAY
TOP TABLE
PLATE-TOP TABLE
BUTTON-CONTROL
INLAY-DISPLAY
ASSY W/HARNESS-TOP TABLE
ASSY HINGE UPP-L
HINGE-UPP L
SHIM HINGE-UPP
ASSY HINGE UPP-R
HINGE-UPP R
SHIM HINGE-UPP
ASSY HINGE MID-L
HINGE-MID L
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
ASSY HINGE MID-R
HINGE-MID R
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
GROMMET HINGE-MID,R
ASSY COVER COMP
BOLT-HEX
COVER RELAY
ASSY CAP-DRAIN
DRYER
ASSY TRAY-DRAIN WATER
SEAL-SUB COND
TRAY DRAIN-WATER
ASSY PIPE-CONDENSER
ASSY SUPPORT-CIRCUIT MOTOR
MOTOR BLDC
SUPPORT-CIRCUIT MOTOR
BRACKET-CIRCUIT MOTOR
GROMMET-MOTOR,REAR
GROMMET-COVER CHIL
ASSY-HARNESS MOTOR
FAN-ASS'Y
ASSY CHASSIS COMP
SHAFT-CASTER
CASTER-REAR
CHASSIS COMP
BRACKET-CABI
ASSY COVER LEG FRONT
COVER LEG-FRONT
CAP LEG FRONT
NW2-FDR,I BLACK(SC-00477R),BLUE LED(Fahrenheit)
200VDC,1.5A,NW2 FDR-PJT,DOOR REF,FR-4,300*19.5*1.6T,BLUE LED,12V, 5V,-,N,-,-,NW2-FDR,HIPS,L303.2,NTR
NW2-FDR,HIPS,I-BLACK (SC-00477R),T2.0,L811
AW-PJT,SBHG1,T0.3,67.8,115,-,AW-BASIC
AW-PJT,GPPS,-,-,NTR,NW2-FDR,PC,T0.25,I BLACK(SC-00477R),Fahrenheit
NW2-PJT,FDR
NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,-,-,NW2-PJT(05),HIPS,T1.0,-,-,-,NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,BLACK,-,NW2-PJT(05),HIPS,T1.0,-,-,-,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,NEXT,POM,T2.0,-,-,-,-,WHITE,NW2-FDR,T0.4,W263.6,L716.0
S25C,M6,-,-,L42.6,WHITE,-,ZPC
NORYL,T2.0,-,-,-,SSEC,BLACK,HOOK
EPEL,ASSY,-,-,L224.5,-,SOFT-PVC
C1220T,OD18.70,L114,-,-,NW2-FDR,PP SCRAP,SPIRAL COND.
W2-05,FOAM-PE,-,T7,-,-,NW2,PP,-,-,-,-,NTR,NW2-FDR
AW2-PJT,-,-,-,-,1550RPM,2.7W
DRCP5030LA,1560,-,DC12V,230mA,-,-,2.7W,ATOP
NEXT,ABS,-,-,-,NTR,ABS,NEXT,-,-,-,NTR,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
SILICON,T3.0,-,L16,-,-,BLACK,A-TOP UL(MOTOR),C-FAN,350MM
ET,ZIPEL,ASSY,-,UNIT,_150
NW2/FDR,CASTER(TPE)
AW-PJT,MSWR10,L46,OD8.2,-,-,ZPC2 / 2
AW-PJT,PP,-,35,NTR,35,PP+TPE / 2
NW2,SBHG1,T1.2,-,-,-,ALL,SBHG1,T1.6,-,-,-,NW2-FDR,I-BLACK,DRAWER
NW2,PP,I-BLACK(SC-00477R),NEW09
NW2,PP,-,-,-,I-BLACK,SC-00477R / 2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
68
REMARK
RO045
RO045
RO150
RO042
RO128
RO067
RQ747
RO123
RO067
RH002
RH015
RW074
RH004
RZ110
RH014
RH003
RH030
RH003
RW005
RO132
RI089
RF033
RH039
RO138
RI087
RI133
RI085
RH019
RH011
RO002
RO003
RO003
RO001
RO158
RH009
RH012
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF217AB)
NO
CODE-NO
15
15-1
15-2
15-3
16
17
DA97-06688B
DA61-04977A
DA61-04490A
DA71-50240B
DA61-04702A
DA61-01920A
PART NAME
ASSY SUPPORT-FOOT FRONT
FOOT-FRONT
SUPPORT-FOOT FRONT
BRACKET-CABI
CASTER-FRONT
CASTER-RIVET
SPEC
NW2-FDR,FOOT FRONT(DA61-04977A) / 2
AW2-PJT,PP+MSWR10,-,BLACK,-,-,- / 2
NW2,SHP1,T4.0,-,-,-,- / 2
T3-PJT,SBHG1,T1.6,-,-,-,AW-PJT,PP,-,35,NTR,35,PP+TPE
(ZPC2),MSWR10,OD8.0,L54,-,-,-
69
QUAN
TITY
2
1
1
2
2
REMARK
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF197AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
4-3
4-4
5
5-1
5-2
5-3
5-4
6
7
8
9
10
11
12
12-1
12-2
12-3
12-4
12-4-1
12-4-2
12-4-3
12-4-4
12-4-5
12-4-6
12-5
13
13-1
13-2
13-3
13-4
14
14-1
14-2
DA97-07654A
DA34-00043C
DA41-00635A
DA61-05316A
DA64-02960A
DA61-04052A
DA64-02071A
DA64-02981A
DA96-00571A
DA97-06715B
DA61-04475B
DA63-02527A
DA97-06716B
DA61-04476B
DA63-02527A
DA97-07514A
DA61-04916D
DA66-00444A
6011-001442
DA63-04694A
DA97-07515A
DA61-04917D
DA66-00444A
6011-001442
DA63-04694A
DA63-02905A
DA97-07835A
DA60-20008A
DA63-01866A
DA97-04049A
DA62-01514A
DA97-07655A
DA62-00954A
DA63-04466A
DA97-07653A
DA97-03145L
DA31-00146B
DA61-02349B
DA61-02355B
DA63-01146A
DA63-40167A
DA96-00042A
DA31-00010D
DA97-06815B
DA66-00649A
DA61-04703A
DA64-02694A
DA71-50240A
DA97-07836B
DA63-05106B
DA67-02071B
ASSY-TOP TABLE
SWITCH REED-ASS'Y
PBA PANEL
CASE-PBA DISPLAY
TOP TABLE
PLATE-TOP TABLE
BUTTON-CONTROL
INLAY-DISPLAY
ASSY W/HARNESS-TOP TABLE
ASSY HINGE UPP-L
HINGE-UPP L
SHIM HINGE-UPP
ASSY HINGE UPP-R
HINGE-UPP R
SHIM HINGE-UPP
ASSY HINGE MID-L
HINGE-MID L
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
ASSY HINGE MID-R
HINGE-MID R
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
GROMMET HINGE-MID,R
ASSY COVER COMP
BOLT-HEX
COVER RELAY
ASSY CAP-DRAIN
DRYER
ASSY TRAY-DRAIN WATER
SEAL-SUB COND
TRAY DRAIN-WATER
ASSY PIPE-CONDENSER
ASSY SUPPORT-CIRCUIT MOTOR
MOTOR BLDC
SUPPORT-CIRCUIT MOTOR
BRACKET-CIRCUIT MOTOR
GROMMET-MOTOR,REAR
GROMMET-COVER CHIL
ASSY-HARNESS MOTOR
FAN-ASS'Y
ASSY CHASSIS COMP
SHAFT-CASTER
CASTER-REAR
CHASSIS COMP
BRACKET-CABI
ASSY COVER LEG FRONT
COVER LEG-FRONT
CAP LEG FRONT
NW2-FDR,I BLACK(SC-00477R),BLUE LED(Fahrenheit)
200VDC,1.5A,NW2 FDR-PJT,DOOR REF,FR-4,300*19.5*1.6T,BLUE LED,12V, 5V,-,N,-,-,NW2-FDR,HIPS,L303.2,NTR
NW2-FDR,HIPS,I-BLACK (SC-00477R),T2.0,L811
AW-PJT,SBHG1,T0.3,67.8,115,-,AW-BASIC
AW-PJT,GPPS,-,-,NTR,NW2-FDR,PC,T0.25,I BLACK(SC-00477R),Fahrenheit
NW2-PJT,FDR
NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,-,-,NW2-PJT(05),HIPS,T1.0,-,-,-,NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,BLACK,-,NW2-PJT(05),HIPS,T1.0,-,-,-,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,NEXT,POM,T2.0,-,-,-,-,WHITE,NW2-FDR,T0.4,W263.6,L716.0
S25C,M6,-,-,L42.6,WHITE,-,ZPC
NORYL,T2.0,-,-,-,SSEC,BLACK,HOOK
EPEL,ASSY,-,-,L224.5,-,SOFT-PVC
C1220T,OD18.70,L114,-,-,NW2-FDR,PP SCRAP,SPIRAL COND.
W2-05,FOAM-PE,-,T7,-,-,NW2,PP,-,-,-,-,NTR,NW2-FDR
AW2-PJT,-,-,-,-,1550RPM,2.7W
DRCP5030LA,1560,-,DC12V,230mA,-,-,2.7W,ATOP
NEXT,ABS,-,-,-,NTR,ABS,NEXT,-,-,-,NTR,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
SILICON,T3.0,-,L16,-,-,BLACK,A-TOP UL(MOTOR),C-FAN,350MM
ET,ZIPEL,ASSY,-,UNIT,_150
NW2/FDR,CASTER(TPE)
AW-PJT,MSWR10,L46,OD8.2,-,-,ZPC2 / 2
AW-PJT,PP,-,35,NTR,35,PP+TPE / 2
NW2,SBHG1,T1.2,-,-,-,ALL,SBHG1,T1.6,-,-,-,NW2-FDR,I-BLACK,DRAWER
NW2,PP,I-BLACK(SC-00477R),NEW09
NW2,PP,-,-,-,I-BLACK,SC-00477R / 2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
70
REMARK
RO045
RO045
RO150
RO042
RO128
RO067
RQ747
RO123
RO067
RH002
RH015
RW074
RH004
RZ110
RH014
RH003
RH030
RH003
RW005
RO132
RI089
RF033
RH039
RO138
RI087
RI133
RI085
RH019
RH011
RO002
RO003
RO003
RO001
RO158
RH009
RH012
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF197AB)
NO
CODE-NO
15
15-1
15-2
15-3
16
17
DA97-06688B
DA61-04977A
DA61-04490A
DA71-50240B
DA61-04702A
DA61-01920A
PART NAME
ASSY SUPPORT-FOOT FRONT
FOOT-FRONT
SUPPORT-FOOT FRONT
BRACKET-CABI
CASTER-FRONT
CASTER-RIVET
SPEC
NW2-FDR,FOOT FRONT(DA61-04977A) / 2
AW2-PJT,PP+MSWR10,-,BLACK,-,-,- / 2
NW2,SHP1,T4.0,-,-,-,- / 2
T3-PJT,SBHG1,T1.6,-,-,-,AW-PJT,PP,-,35,NTR,35,PP+TPE
(ZPC2),MSWR10,OD8.0,L54,-,-,-
71
QUAN
TITY
2
1
1
2
2
REMARK
EXPLODED VIEW& PARTS LIST
5-4) Disassembly of Freezer Door
2-1
2-3
2-6
2-2
2-7
2-5
1
2
2-8
2-4
1-10
1-11
1-14
1-16
1-6
1-8
1-9
1-12 1-13
1-1
1-15
1-1-1
1-7
1-1-3
1-1-2
1-2
1-3
1-5
1-1-4
4
72
EXPLODED VIEW& PARTS LIST
■ Parts List of Freezer Door (RF217AB, RF197AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-1-1
1-1-2
1-1-3
1-1-4
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
2
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
DA90-05229A
DA91-02887A
DA67-02332A
DA67-02331A
6002-001122
DA61-03769A
DA97-07722A
DA61-03153B
DA61-03155B
6002-000613
DA63-05034A
DA63-05033A
6002-000215
DA61-04471A
DA61-05327A
DA67-02343A
DA67-02344A
DA61-05215A
DA61-04474B
DA66-00682A
DA61-04335B
DA97-07683A
DA64-02957A
DA67-02346A
DA67-02347A
6002-000215
6002-001122
DA61-03636A
DA61-05232A
DA61-05233A
ASSY DOOR FRE(DRAWER)
ASSY DOOR FOAM FRE(DRAWER)
CAP DOOR FRE SUB L
CAP DOOR FRE SUB R
SCREW TAPPING
MAGNET
ASSY-GASKET DOOR FRE
HANGER-RAIL FRONT L
HANGER-RAIL FRONT R
SCREW-TAPPING
COVER-HANDLE FRE L
COVER-HANDLE FRE R
SCREW-TAPPING
FIXER SHAFT-HANDLE
FIXER HANDLE
CAP HANDLE FRE SUB L
CAP HANDLE FRE SUB R
REINF CAP HANDLE FRE
SLIDER-HANDLE FRE
SHAFT-CAP HANDLE
SPRING ETC-EASY HANDLE
ASSY HANDLE-BAR FRE
HANDLE BAR FRE
CAP HANDLE FRE L
CAP HANDLE FRE R
SCREW-TAPPING
SCREW-TAPPING
STOPPER HANDLE
BRACKET HANDLE UPP
BRACKET HANDLE LOW
SECC1,EMPIRE-BLACK,AL BAR,DRAWER,CLEAR COATING-PCM,FDR
NW2-FDR,EMPIRE BLACK,PCM,DRAWER-TYPE
NW2-FDR,ABS,i-BLACK,EASY-HANDLE
NW2-FDR,ABS,i-BLACK,EASY-HANDLE
FH,+,1,M4,L14,ZPC(WHT),SWRCH18A
HERMES,-,5x7x18,-,-,1200Gauss
NW2-FDR,BLACK,-,AW-PJT,SECC1,T2.0,COOL-WHITE,-,-,RESTRIKING
AW-PJT,SECC1,T2.0,COOL-WHITE,-,-,RESTRIKING
TH,+,-,2,M5,L16,ZPC(WHT),SWRCH18A,NW2-FDR,ABS,i-BLACK,EASY-HANDLE
NW2-FDR,ABS,i-BLACK,EASY-HANDLE
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,NW2,POM,-,NTR,NW2-FDR,SWCH10A
NW2-FDR,PC-ABS,-,100,I-BLACK(SC-00477R),NW2-FDR,PC-ABS,-,100,I-BLACK(SC-00477R),AW2-PJT,SGHC,T1.6,-,53,-,NW2,POM,-,-,-,I-BLACK,NW2-FDR,MSWR10,L105,OD5.0
08 AW1,2-PJT,HSWR,1.0,8,10,-,9,-,-,-,NW2-FDR,-,-,-,804.6,-,MATURE BLACK,NW2-FDR,AL,663.8,MATURE BLACK (SC-03106T)
NW2-FDR,ABS,100,I-BLACK (SC-00477R)
NW2-FDR,ABS,100,I-BLACK (SC-00477R)
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,FH,+,1,M4,L14,ZPC(WHT),SWRCH18A
CULLINAN,SK5,-,-,-,-,AW2-PJT,POM,-,-,-,NTR,AW2-PJT,POM,-,-,-,NTR,-
1
1
1
1
4
1
1
1
1
8
1
1
2
2
2
1
1
2
2
2
2
1
1
1
1
4
4
2
1
1
73
REMARK
EXPLODED VIEW& PARTS LIST
5-5) Disassembly of Refrigerator Door Left
1-1
1
2
3
5
9
2-2
2-4
6
2-1
10
11
2-3
1-7
1-6
1-5
1-2
4
1-3
1-4
4-3
4-5
4-4
4-7
4-2
4-1
4-15
4-6
4-16
7
8
4-10
4-12
4-11
4-9
4-8
74
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator Door-Left (RF217AB, RF197AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
2
2-1
2-2
2-3
2-4
3
4
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-14
4-15
4-16
5
6
7
8
9
10
11
DA91-02889A
DA61-03769A
6001-001377
6002-001120
6009-001475
DA61-02383A
DA61-03211A
DA63-40294A
DA97-07896A
DA64-03069A
DA67-02391A
DA67-02392A
6002-000215
DA97-07668A
DA97-07661A
DA61-05315A
DA47-00245E
DA61-05291A
DA62-02212A
DA62-02294A
DA63-03454B
DA63-03508A
DA63-05158A
DA67-01650A
DA67-01701A
DA81-01345A
DA81-01346A
DA67-02306A
6002-000630
DA61-03230B
6002-000213
6002-000468
DA61-02984A
6002-000213
DA67-30218R
DA63-05131A
DA63-05035A
DA63-05036A
ASSY DOOR FOAM REF L(NON-DISPENSER)
MAGNET
SCREW-MACHINE
SCREW-TAPPING
SCREW-SPECIAL
SUPPORT-DOOR CLOSE
STOPPER-DOOR L
GROMMET-STOPPER
ASSY HANDLE-BAR REF
HANDLE BAR REF
CAP HANDLE REF UPP
CAP HANDLE REF LOW
SCREW-TAPPING
ASSY-GASKET DOOR REF
ASSY-FRENCH
CASE-FRENCH
HEATER CORD-FRENCH
PLATE-FRENCH
INSULATION-FRENCH
SEAL-CUTT FRENCH
COVER-HEATER FRENCH
GASKET-FRENCH
GASKET-FRENCH
CAP-CASE FRENCH
CAP-CASE FRENCH MID
SPRING-ETC FRENCH
PIN-FRENCH SPRING
CAP GUIDE FRENCH UPP
SCREW-TAPPING
HINGE-FRENCH
SCREW-TAPPING
SCREW-TAPPING
FIXER HANDLE
SCREW-TAPPING
CAP-SCREW
GUARD REF-UPP
GUARD REF-MID
GUARD REF-LOW
NW2-FDR,BLACK,-,-,-,BASIC
HERMES,-,5x7x18,-,-,1200Gauss
TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,FH,+,1,M4,L18,ZPC(WHT),SWRCH18A
FH,+,-,M5,L25(15.5),PASS,STS304,1,NEXT,POM,-,-,-,-,AW-PJT,SHP1,T2.9,-,-,-,T3XW8XL8,NR,-,-,-,-,-,-,BLK
NW2-FDR,-,-,-,-,-,MATURE BLACK,NW2-FDR,AL,T1.2,-,777,-,MATURE BLACK,COATING
NW2-FDR,ABS,I BLACK
NW2-FDR,ABS,I BLACK
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,NW2-FDR,BLACK,-,NW2-FDR,6W,BLACK,NW2-FDR,ABS,888.9,COOL WHITE (SC-02740R)
NW2-PJT,P-CORD,6W,120V,2400,FRENCH
NW2-FDR,SECC1,T0.8,41.1,879.3,ALL BLACK
NW2-FDR,FOAM-PS,883.0
NW2-FDR,SPONGE+AL,-,T3,W35,L88°¶
AW-PJT,PC(HF-1023IM),-,-,-,-,-,COOL-WHITE(SC-02740R,AW-PJT,SF-PVC,-,-,-,BLACK,-,NW2-FDR,SILICON,0.8,BLACK
AW-PJT,ABS,-,-,-,-,AW-PJT,ABS,-,-,-,-,STS304,PI1.4,-,-,-,-,RD-PVC,WHITE,-,-,-,-,AW2 CD,POM,-,-,-,COOL WHITE,PH,+,-,2S,M3,L8,ZPC(WHT),SWRCH18A,AW-PJT,PC(HF-1023IM),-,-,-,COOL-WHITE(SC-02740R,-,TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,A-TOP 06,POM,-,NTR,TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,-,PP,-,-,-,SC-97527R,SNOW WHITE
NW2-FDR,PP,COOL WHITE,SC-02740R
NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R)
NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)
1
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
4
2
2
2
2
1
1
75
REMARK
EXPLODED VIEW& PARTS LIST
5-6) Disassembly of Refrigerator Door Right
2
4
7
1-1
2-2
1
3
2-4
5
7-1
6
2-1
7-2
8
2-3
9
10
1-7
1-6
1-4
1-5
1-2
1-3
76
EXPLODED VIEW& PARTS LIST
■ Part List of Refrigerator Door-Right (RF217AB, RF197AB)
NO
CODE-NO
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
2
2-1
2-2
2-3
2-4
3
4
5
6
7
7-1
7-2
8
9
10
DA91-02888A
DA61-03769A
6001-001377
6002-001120
6009-001475
DA61-02383E
DA61-03212A
DA63-40294A
DA97-07896A
DA64-03069A
DA67-02391A
DA67-02392A
6002-000215
DA97-07668A
6002-000468
DA61-02984A
DA64-01985A
DA97-07681A
DA63-05042A
DA63-05050A
DA63-05131A
DA63-05035A
DA63-05036A
PART NAME
ASSY DOOR FOAM REF R
MAGNET
SCREW-MACHINE
SCREW-TAPPING
SCREW-SPECIAL
SUPPORT-DOOR CLOSE
STOPPER-DOOR L
GROMMET-STOPPER
ASSY HANDLE-BAR REF
HANDLE BAR REF
CAP HANDLE REF UPP
CAP HANDLE REF LOW
SCREW-TAPPING
ASSY-GASKET DOOR REF
SCREW-TAPPING
FIXER HANDLE
MASCOT
ASSY GUARD-DAIRY
GUARD-DAIRY
COVER-GUARD DAIRY
GUARD REF-UPP
GUARD REF-MID
GUARD REF-LOW
SPEC
HERMES,-,5x7x18,-,-,1200Gauss
TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,FH,+,1,M4,L18,ZPC(WHT),SWRCH18A
FH,+,-,M5,L25(15.5),PASS,STS304,1,AW-PJT,POM,-,-,-,CREAMY STS,AW-PJT,SHP1,T2.9,-,-,-,T3XW8XL8,NR,-,-,-,-,-,-,BLK
NW2-FDR,-,-,-,-,-,MATURE BLACK,NW2-FDR,AL,T1.2,-,777,-,MATURE BLACK,COATING
NW2-FDR,ABS,I BLACK
NW2-FDR,ABS,I BLACK
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,NW2-FDR,BLACK,-,PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,A-TOP 06,POM,-,NTR,SBS,AL,T1.6,-,L90,Fixing-type,Siver,forging
NW2-FDR,PP,COOL WHITE,SC-02740R
NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R)
NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)
77
QUAN
TITY
1
1
1
1
2
1
1
1
2
1
1
1
2
1
4
2
1
1
1
1
1
1
1
REMARK
5 . EXPLODED VIEW& PARTS LIST
5-1) Freezer
1-5
1-4
1
1-3
1-5
1-4
1-2
1-1
2
7
2-3 2-2
9
3
4
10
6
5
2-1
10
11
11-1
10-1
11-2
10-2
12-4
12-1
12
12-5
12-2
12-3
13-3
13-2
13-1
13-6
13-4
13
78
13-5
13-8
13-7
13-9
■ Parts List of Freezer (RF195AB)
NO
CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
2
2-1
2-2
2-3
3
4
5
6
7
8
9
10
10-1
10-2
10-3
11
12
12-1
12-2
12-3
13
14
15
16
16-1
16-2
16-3
16-4
16-5
16-6
16-7
16-8
16-9
DA97-06670A
DA63-04455A
DA63-04456A
DA63-04450A
DA66-10104A
DA71-20145A
DA90-04793A
DA61-03189A
DA67-01231A
DA63-05155A
DA96-00480A
DA60-90005A
DA61-02901A
DA61-04462A
DA47-00243C
DA63-04296A
4713-001206
DA97-06720A
DA61-04464A
DA61-04516A
DA66-00436A
DA61-04508A
DA97-06718A
DA61-04465A
DA61-04515A
DA66-00436A
DA61-04509A
DA63-04446A
DA61-05425A
DA97-06657A
DA63-04444A
DA62-01942A
DA61-04461A
DA63-01809A
DA31-00124A
DA61-03183A
DA63-01808A
DA31-00146H
DA63-01146A
ASSY TRAY-FRE UPP
COVER-TRAY FRE UPP A
COVER-TRAY FRE UPP B
TRAY-FRE UPP
ROLLER-FRE
FIXER-ROLLER
ASSY ICE MAKER
CASE-ICE CUBE
SCOOP ICE
TRAY-CASE ICE CUBE
ASSY EVAP-FRE
RIVET-AVEX
FIXER-SENSOR EVAP
PLATE-DRAIN FRE
THERMO BIMETAL-PROTECTOR
COVER LAMP-FRE
LAMP-INCANDESCENT
ASSY RAIL-SLIDE LOW L
HANGER-RAIL LOW L
RAIL-SLIDE LOW L
GEAR-L
SUPPORT-RAIL LOW L
ASSY RAIL-SLIDE LOW R
HANGER-RAIL LOW R
RAIL-SLIDE LOW R
GEAR-L
SUPPORT-RAIL LOW R
TRAY-DRAWER BOX
GUIDE-DRAWER BOX
ASSY COVER-EVAP FRE
COVER-EVAP FRE
INSULATION-EVAP FRE
PLATE-INS EVAP FRE
COVER MOTOR-BLDC
FAN-AX100W4CC-T1
CASE-MOTOR FRE
GROMMET-MOTOR,FRONT
MOTOR BLDC
GROMMET-MOTOR,REAR
SPEC
NW2-PJT,-,-,-,-,19CU ft
NW2-PJT,HIPS,-,-,-,-,-,COOL WHT,NW2-PJT,GPPS,-,-,-,-,-,-,NW2-PJT,HIPS,-,-,-,-,COOL WHITE,19INCH
POM,-,-,D22,-,-,
61BU
NW2,AUTO ICE MAKER,-,-,-,AW-PJT,PP,-,-,-,COOL WHITE,W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,AW2-CD,LDPE,NTR
NW2-PJT,-,-,-,-,-,-,115V/240W,AL,D3.2,L9.83,-,CORE-PJT,PP,-,NTR,NW2-PJT,GALVANUME,T0.3,-,516,-,AW-PJT(R),BT-121-M, PW-5M1N
AW2,PC,-,-,-,-,-,Transparent,120V,340mA,40W,FROST,-,-,NW2,-,-,-,-,19cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2,STS304,-,-,-,-,19cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,19CU ft
NW2,-,-,-,-,19cu.ft
NW2-PJT,SECC1,T1.6,COOL WHT,-,-,NW2,STS304,-,-,-,-,19cu.ft
AW-PJT,POM,-,-,-,NTR,-,-,NW2-PJT,ABS,-,-,-,COOL WHT,19CU ft
NW2-PJT,PP,-,-,-,-,COOL WHT,19INCH
NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
NW2-PJT,-,-,-,-,-,-,-,NW2-PJT,PP,-,-,-,-,-,COOL WHT,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,GALVALUME,T0.3,-,-,-,BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
-,TD-PJT,ABS,-,AW-PJT,BUBBLE PP,-,-,-,NTR,BLDC,NBR,BLACK,-,-,-,-,-,H20
-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
79
QUAN
TITY
REMARK
1
1
1
1
4
4
1
1
1
RI242
RI064
RI062
RF002
RW648
RH029
RM001
RM012
RI247
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RF011
RI157
RF026
RI074
RF031
RI081
RI171
RD094
RI184
RI242
RI173
RD095
RI185
RI242
RI237
RF005
RF005
RI232
RF092
RF083
RI085
RF120
RO137
RI089
RO138
EXPLODED VIEW& PARTS LIST
5-2) Refrigerator
2
1
1-1
2-1
9
1-2
2-2
8
13
4
4-1
1-3
1-4
4-2
1-5
1-6
1-6
3
6
3-1
6-1
7
3-2
6-2
7-1
7-2
10
5-2
10-5
10-4
10-2
10-3
5
10
5-1
10-5
10-4
10-5
10-4
10-1
10-2
10-3
10-5
10-4
12
10-1
12-5
12-8
12-2
12-1
11-17
11-1
11-15
11-6
11-4
11-7
11-11
11-12
11-16
11-21
11-2
11-3
11-18
11-5
12-4
11-9
11
11-13
12-6
11-10
11-8
11-20
80
11-19
12-9
12-7
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF195AB)
NO CODE-NO
PART NAME
1
1-1
1-2
1-3
1-4
1-5
1-6
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
5
5-1
5-2
6
6-1
6-2
7
7-1
7-2
8
9
10
10-1
10-2
10-3
10-4
10-5
11
11-1
11-2
11-3
11-4
11-5
11-6
11-7
11-8
11-9
11-10
11-11
11-12
11-13
11-14
11-15
11-16
11-17
11-18
DA97-06686A
DA64-02645A
DA64-02647A
DA61-04511A
DA61-04510A
DA61-04505A
DA63-00202A
DA97-06674A
DA63-04464A
DA63-04465A
DA97-06675A
DA64-02645A
DA64-02647A
DA97-00663D
DA64-00448B
DA67-01807H
DA97-07058A
DA61-00760B
DA61-04875A
DA97-00103N
DA61-60126E
DA63-40006A
DA97-00103P
DA61-60127E
DA63-40006A
DA63-04549A
4713-001206
DA97-06700A
DA61-00762A
DA63-04445A
DA64-00656A
DA66-10104A
DA71-20145A
DA97-06656A
6002-000213
6002-000215
DA31-00124A
DA31-00146H
DA32-10105X
DA61-03181A
DA61-03182A
DA61-04701A
DA61-03599A
DA61-20128A
DA62-01383A
DA62-01423A
DA62-01941A
DA62-01969A
DA63-01146A
DA63-01808A
DA63-01809A
DA63-04439A
ASSY SHELF-REF UPP
TRIM SHELF-REF
GLASS-SHELF
SUPPORT-GUIDE RAIL FRONT
SUPPORT-GUIDE RAIL REAR
GUIDE-RAIL
GROMMET-RAIL
ASSY TRAY-CHILLED ROOM
TRAY CHIL ROOM
COVER-TRAY CHIL ROOM
ASSY SHELF-TRIM REF MID
TRIM SHELF-REF
GLASS-SHELF
ASSY COVER-VEG
TRIM-COVER VEG
SHELF-GLASS
ASSY RAIL VEG-MID
RAIL-VEG, MID
SUPPORT-RAIL VEG
ASSY RAIL-VEG, L
RAIL-VEG
GROMMET
ASSY RAIL-VEG, R
RAIL-VEG
GROMMET
COVER LAMP-REF
LAMP-INCANDESCENT
ASSY CASE-VEG REF
CASE-VEG,REF
COVER-VEG REF
KNOB-HUMIDITY
ROLLER-FRE
FIXER-ROLLER
ASSY COVER-EVAP REF
SCREW-TAPPING
SCREW-TAPPING
FAN-AX100W4CC-T1
MOTOR BLDC
SENSOR TEMP
CASE-MOTOR REF
GUIDE-INS EVAP REF
PLATE-INS EVAP REF
PLATE-HOUSING REF
SPRING ETC-FAN
INSULATION-EVAP SUB
INSULATION-EVAP DUCT
INSULATION-EVAP REF
INSULATION-EVAP REAR
GROMMET-MOTOR,REAR
GROMMET-MOTOR,FRONT
COVER MOTOR-BLDC
COVER-EVAP REF
SPEC
QUAN
TITY
NW2,19cu.ft
NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,NW2,HIPS,-,-,-,COOL WHITE,-,NY-6,-,-,-,-,-,-,NW2,-,-,-,-,19cu.ft
NW2,GPPS,-,-,-,-,-,NW2,HIPS,-,-,-,-,-,COOL WHITE,NW2,NW2,HIPS,-,-,-,COOL WHITE,21cu.ft
NW2,GLASS,T4.0,-,-,-,-,NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITE
W2-PJT(55),ABS,-,T2.5,L403,W717,cool white
W2-PJT(55), GLASS,T5,W708.5,L346,-,COVER-VEG
NW2,-,-,-,-,21Cu.ft
W2-PJT(55),ABS,T2.5,-,-,COOL-WHITE,SC-02740R
NW2,PP(BJ-730),-,-,-,COOL WHITE,W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,LEFT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
W2-PJT,ABS,L341.5,SC-02740R,cool white,W2-PJT,ABS,T3.0,-,RIGHT,COOL-WHITE,SC-02740R
RAIL,NY-6,-,-,-,-,-,-,RAIL
NW2,PC,-,-,-,-,-,NTR,PT-1020
120V,340mA,40W,FROST,-,-,NW2-PJT,-,-,-,-,W2-PJT(55),HIPS,-,-,-,WHITE,HG-1760
NW2-PJT,SAN,-,-,-,-,-,NATURAL,W2-PJT,ABS,-,-,-,-,W9540,-,BEST BYE
POM,-,-,D22,-,-,
-,PA,--,NW2-PJT,-,-,-,-,-,-,-,TWIN COOLING
TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,-,TD-PJT,ABS,-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,PX-41C,QUEEN PJT,-10,5V,-,-,F-SENSOR,YELLOW
AW-PJT,BUBBLE PP,-,-,-,NTR,AW-PJT,ABS,-,-,-,NTR,NW2,SAZCC,T3.0,-,-,-,AW-PJT,GALVALUME,T0.3,-,-,-,-,STS304,PI7.8,-,OD1.0,-,-,-,-,-,FD
AW-PJT,FOAM-PS,-,-,-,-,-,-,AW-PJT,FOAM-PS,T20,W44.5,L45,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,NW2-PJT,FOAM-PS,-,-,-,-,-,-,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
BLDC,NBR,BLACK,-,-,-,-,-,H20
BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730
NW2-PJT,PP,-,-,-,-,-,COOL WHT,-
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
3
4
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
81
REMARK
RI041
RI079
RI037
RI088
RI018
RI018
RI079
RI037
RI997
RI091
RF183
RI030
RI028
RI028
RW374
RI029
RI028
RW374
RI081
RI999
RI999
RI010
RW508
RW648
RH029
RS047
RS080
RI085
RI089
RQ684
RF121
RI210
RI307
RW716
RI232
RI236
RI231
RI233
RO138
RO137
RF083
RI024
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator (RF195AB)
NO CODE-NO
PART NAME
11-19
11-20
11-21
12
12-1
12-2
12-3
12-4
12-5
12-6
12-7
12-8
12-9
13
DA63-40167A
DA64-02065A
DA96-00042A
DA96-00461C
6501-000123
DA32-00006S
DA47-00243C
DA47-00244B
DA59-00357B
DA60-90005A
DA61-03644A
DA61-03683A
DA61-04148A
DA61-05292A
GROMMET-COVER CHIL
TRIM-COVER EVAP REF
ASSY-HARNESS MOTOR
ASSY EVAP-REF
CABLE TIE
SENSOR TEMP
THERMO BIMETAL-PROTECTOR
HEATER-METAL SHEATH
EVAP REF
RIVET-AVEX
PLATE-EVAP HEATER
FIXER-SENSER
PLATE-DRAIN REF
GUIDE-FRENCH
SPEC
QUAN
TITY
T3.0,SILICON,-,-,-,-,-,-,NTR
AW-PJT,ABS,-,-,-,COOL WHITE,A-TOP UL(MOTOR),C-FAN,350MM
NW2-PJT,PIN,-,-,115V/240W,-,-,-,DACT-140,-,W3.6,L146,NTR,NYLON66
PX-41C, 502AT,AW-PJT,-40~110°…,5V,-,-,R-DEF SENSOR,YEL,400MM
AW-PJT(R),BT-121-M, PW-5M1N,125 / 250V,10 / 5A,60°…,40°…,-,-,100Mߟ,-,-,AW-PJT,-,120W,-,115V,110.2Ω,-,-,R-ROOM
-,-,-,-,-,-,-,-,AW-PJT,AL,D3.2,L9.83,-,AW-PJT,AL,T0.7,-,-,-,AW-PJT,ABS,-,NTR,AW-PJT('08),GALVANUME,T0.3,-,-,-,NW2-FDR,PC-ABS,31.3,95.1,COOL WHITE,SC-02740R
1
1
1
4
1
1
1
1
1
1
1
1
82
1
REMARK
RI087
RI241
RO101
RI016
RF170
RM017
RF026
EXPLODED VIEW& PARTS LIST
5-3)Cabinet
1
1-5
2
1-4
1-7
2-1
2-2
1-2
1-6
1-3
1-8
1-1
3-1
3-2
3
5
8
10
4
9
4-4
6
4-2
5
4-3
5-2
4-1
5-4
5-1
12
5-3
12-1
7
11
12-3
12-5
12-4
12-4-3
15
12-4-7
12-4-5
15-2
15-1
17
13
19
16
14
12-2
18
17
12-4-2 12-4-1
12-4-4
18-3
18-2
18-1
13-3
14-2
13-1
14-1
13-4
13-2
13-1
83
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF195AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2
2-1
2-2
3
3-1
3-2
4
4-1
4-2
4-3
4-4
5
5-1
5-2
5-3
5-4
6
7
8
9
10
11
12
12-1
12-2
12-3
12-4
12-4-1
12-4-2
12-4-3
12-4-4
12-4-5
12-4-6
12-5
13
13-1
13-2
13-3
13-4
14
14-1
14-2
DA97-07654A
DA34-00043C
DA41-00635A
DA61-05316A
DA64-02960A
DA61-04052A
DA64-02071A
DA64-02981A
DA96-00571A
DA97-06715B
DA61-04475B
DA63-02527A
DA97-06716B
DA61-04476B
DA63-02527A
DA97-07514A
DA61-04916D
DA66-00444A
6011-001442
DA63-04694A
DA97-07515A
DA61-04917D
DA66-00444A
6011-001442
DA63-04694A
DA63-02905A
DA97-07835A
DA60-20008A
DA63-01866A
DA97-04049A
DA62-01514A
DA97-07655A
DA62-00954A
DA63-04466A
DA97-07653A
DA97-03145L
DA31-00146B
DA61-02349B
DA61-02355B
DA63-01146A
DA63-40167A
DA96-00042A
DA31-00010D
DA97-06815B
DA66-00649A
DA61-04703A
DA64-02694A
DA71-50240A
DA97-07836B
DA63-05106B
DA67-02071B
ASSY-TOP TABLE
SWITCH REED-ASS'Y
PBA PANEL
CASE-PBA DISPLAY
TOP TABLE
PLATE-TOP TABLE
BUTTON-CONTROL
INLAY-DISPLAY
ASSY W/HARNESS-TOP TABLE
ASSY HINGE UPP-L
HINGE-UPP L
SHIM HINGE-UPP
ASSY HINGE UPP-R
HINGE-UPP R
SHIM HINGE-UPP
ASSY HINGE MID-L
HINGE-MID L
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
ASSY HINGE MID-R
HINGE-MID R
SHAFT HINGE-MID R
BOLT-SOCKET
SHIM HINGE-MID
GROMMET HINGE-MID,R
ASSY COVER COMP
BOLT-HEX
COVER RELAY
ASSY CAP-DRAIN
DRYER
ASSY TRAY-DRAIN WATER
SEAL-SUB COND
TRAY DRAIN-WATER
ASSY PIPE-CONDENSER
ASSY SUPPORT-CIRCUIT MOTOR
MOTOR BLDC
SUPPORT-CIRCUIT MOTOR
BRACKET-CIRCUIT MOTOR
GROMMET-MOTOR,REAR
GROMMET-COVER CHIL
ASSY-HARNESS MOTOR
FAN-ASS'Y
ASSY CHASSIS COMP
SHAFT-CASTER
CASTER-REAR
CHASSIS COMP
BRACKET-CABI
ASSY COVER LEG FRONT
COVER LEG-FRONT
CAP LEG FRONT
NW2-FDR,I BLACK(SC-00477R),BLUE LED(Fahrenheit)
200VDC,1.5A,NW2 FDR-PJT,DOOR REF,FR-4,300*19.5*1.6T,BLUE LED,12V, 5V,-,N,-,-,NW2-FDR,HIPS,L303.2,NTR
NW2-FDR,HIPS,I-BLACK (SC-00477R),T2.0,L811
AW-PJT,SBHG1,T0.3,67.8,115,-,AW-BASIC
AW-PJT,GPPS,-,-,NTR,NW2-FDR,PC,T0.25,I BLACK(SC-00477R),Fahrenheit
NW2-PJT,FDR
NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,-,-,NW2-PJT(05),HIPS,T1.0,-,-,-,NW2,T3.0,-,-,BLACK,-,NW2-PJT,SHP1,T3.0,-,-,BLACK,-,NW2-PJT(05),HIPS,T1.0,-,-,-,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2
NEXT-PJT,AW,SM10C,-,OD11.2,-,-,M8,L13.4,ZPC(BLK),SCM435,AW2,RD-PVC,T1.0,-,-,NTR,NEXT,POM,T2.0,-,-,-,-,WHITE,NW2-FDR,T0.4,W263.6,L716.0
S25C,M6,-,-,L42.6,WHITE,-,ZPC
NORYL,T2.0,-,-,-,SSEC,BLACK,HOOK
EPEL,ASSY,-,-,L224.5,-,SOFT-PVC
C1220T,OD18.70,L114,-,-,NW2-FDR,PP SCRAP,SPIRAL COND.
W2-05,FOAM-PE,-,T7,-,-,NW2,PP,-,-,-,-,NTR,NW2-FDR
AW2-PJT,-,-,-,-,1550RPM,2.7W
DRCP5030LA,1560,-,DC12V,230mA,-,-,2.7W,ATOP
NEXT,ABS,-,-,-,NTR,ABS,NEXT,-,-,-,NTR,A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC
SILICON,T3.0,-,L16,-,-,BLACK,A-TOP UL(MOTOR),C-FAN,350MM
ET,ZIPEL,ASSY,-,UNIT,_150
NW2/FDR,CASTER(TPE)
AW-PJT,MSWR10,L46,OD8.2,-,-,ZPC2 / 2
AW-PJT,PP,-,35,NTR,35,PP+TPE / 2
NW2,SBHG1,T1.2,-,-,-,ALL,SBHG1,T1.6,-,-,-,NW2-FDR,I-BLACK,DRAWER
NW2,PP,I-BLACK(SC-00477R),NEW09
NW2,PP,-,-,-,I-BLACK,SC-00477R / 2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
84
REMARK
EXPLODED VIEW& PARTS LIST
■ Parts List of Cabinet (RF195AB)
NO
CODE-NO
15
15-1
15-2
15-3
16
17
DA97-06688B
DA61-04977A
DA61-04490A
DA71-50240B
DA61-04702A
DA61-01920A
PART NAME
ASSY SUPPORT-FOOT FRONT
FOOT-FRONT
SUPPORT-FOOT FRONT
BRACKET-CABI
CASTER-FRONT
CASTER-RIVET
SPEC
NW2-FDR,FOOT FRONT(DA61-04977A) / 2
AW2-PJT,PP+MSWR10,-,BLACK,-,-,- / 2
NW2,SHP1,T4.0,-,-,-,- / 2
T3-PJT,SBHG1,T1.6,-,-,-,AW-PJT,PP,-,35,NTR,35,PP+TPE
(ZPC2),MSWR10,OD8.0,L54,-,-,-
85
QUAN
TITY
2
1
1
2
2
REMARK
EXPLODED VIEW& PARTS LIST
5-4) Disassembly of Freezer Door
1
1-1
1-2
1-1-1
1-1-2
1-1-3
86
EXPLODED VIEW& PARTS LIST
■ Parts List of Freezer Door (RF195AB)
NO
CODE-NO
1
1-1
1-1-1
1-1-2
1-1-3
1-2
CODE---CODE---DA61-03769A
DA61-02773A
6001-001377
DA97-07722A
PART NAME
ASSY DOOR FRE(SWING)
ASSY DOOR FOAM FRE(SWING)
MAGNET
STOPPER-DOOR
SCREW-MACHINE
ASSY-GASKET DOOR FRE
SPEC
HERMES,-,5x7x18,-,-,1200Gauss
CORE,POM,-,-,-,NTR,TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,NW2-FDR,BLACK,-,-
87
QUAN
TITY
1
1
1
1
1
1
REMARK
EXPLODED VIEW& PARTS LIST
5-5) Disassembly of Refrigerator Door Left
1-1
1
2
3
5
9
2-2
2-4
6
2-1
10
11
2-3
1-7
1-6
1-5
1-2
4
1-3
1-4
4-3
4-5
4-4
4-7
4-2
4-1
4-15
4-6
4-16
7
8
4-10
4-12
4-11
4-9
4-8
88
EXPLODED VIEW& PARTS LIST
■ Parts List of Refrigerator Door-Left (RF195AB)
NO
CODE-NO
PART NAME
SPEC
QUAN
TITY
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
2
2-1
2-2
2-3
2-4
3
4
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-14
4-15
4-16
5
6
7
8
9
10
11
DA91-02889A
DA61-03769A
6001-001377
6002-001120
6009-001475
DA61-02383A
DA61-03211A
DA63-40294A
DA97-07896A
DA64-03069A
DA67-02391A
DA67-02392A
6002-000215
DA97-07668A
DA97-07661A
DA61-05315A
DA47-00245E
DA61-05291A
DA62-02212A
DA62-02294A
DA63-03454B
DA63-03508A
DA63-05158A
DA67-01650A
DA67-01701A
DA81-01345A
DA81-01346A
DA67-02306A
6002-000630
DA61-03230B
6002-000213
6002-000468
DA61-02984A
6002-000213
DA67-30218R
DA63-05131A
DA63-05035A
DA63-05036A
ASSY DOOR FOAM REF L(NON-DISPENSER)
MAGNET
SCREW-MACHINE
SCREW-TAPPING
SCREW-SPECIAL
SUPPORT-DOOR CLOSE
STOPPER-DOOR L
GROMMET-STOPPER
ASSY HANDLE-BAR REF
HANDLE BAR REF
CAP HANDLE REF UPP
CAP HANDLE REF LOW
SCREW-TAPPING
ASSY-GASKET DOOR REF
ASSY-FRENCH
CASE-FRENCH
HEATER CORD-FRENCH
PLATE-FRENCH
INSULATION-FRENCH
SEAL-CUTT FRENCH
COVER-HEATER FRENCH
GASKET-FRENCH
GASKET-FRENCH
CAP-CASE FRENCH
CAP-CASE FRENCH MID
SPRING-ETC FRENCH
PIN-FRENCH SPRING
CAP GUIDE FRENCH UPP
SCREW-TAPPING
HINGE-FRENCH
SCREW-TAPPING
SCREW-TAPPING
FIXER HANDLE
SCREW-TAPPING
CAP-SCREW
GUARD REF-UPP
GUARD REF-MID
GUARD REF-LOW
NW2-FDR,BLACK,-,-,-,BASIC
HERMES,-,5x7x18,-,-,1200Gauss
TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,FH,+,1,M4,L18,ZPC(WHT),SWRCH18A
FH,+,-,M5,L25(15.5),PASS,STS304,1,NEXT,POM,-,-,-,-,AW-PJT,SHP1,T2.9,-,-,-,T3XW8XL8,NR,-,-,-,-,-,-,BLK
NW2-FDR,-,-,-,-,-,MATURE BLACK,NW2-FDR,AL,T1.2,-,777,-,MATURE BLACK,COATING
NW2-FDR,ABS,I BLACK
NW2-FDR,ABS,I BLACK
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,NW2-FDR,BLACK,-,NW2-FDR,6W,BLACK,NW2-FDR,ABS,888.9,COOL WHITE (SC-02740R)
NW2-PJT,P-CORD,6W,120V,2400,FRENCH
NW2-FDR,SECC1,T0.8,41.1,879.3,ALL BLACK
NW2-FDR,FOAM-PS,883.0
NW2-FDR,SPONGE+AL,-,T3,W35,L88°¶
AW-PJT,PC(HF-1023IM),-,-,-,-,-,COOL-WHITE(SC-02740R,AW-PJT,SF-PVC,-,-,-,BLACK,-,NW2-FDR,SILICON,0.8,BLACK
AW-PJT,ABS,-,-,-,-,AW-PJT,ABS,-,-,-,-,STS304,PI1.4,-,-,-,-,RD-PVC,WHITE,-,-,-,-,AW2 CD,POM,-,-,-,COOL WHITE,PH,+,-,2S,M3,L8,ZPC(WHT),SWRCH18A,AW-PJT,PC(HF-1023IM),-,-,-,COOL-WHITE(SC-02740R,-,TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,A-TOP 06,POM,-,NTR,TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,-,PP,-,-,-,SC-97527R,SNOW WHITE
NW2-FDR,PP,COOL WHITE,SC-02740R
NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R)
NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)
1
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
4
2
2
2
2
1
1
89
REMARK
EXPLODED VIEW& PARTS LIST
5-6) Disassembly of Refrigerator Door Right
2
4
7
1-1
2-2
1
3
2-4
5
7-1
6
2-1
7-2
8
2-3
9
10
1-7
1-6
1-4
1-5
1-2
1-3
90
EXPLODED VIEW& PARTS LIST
■ Part List of Refrigerator Door-Right (RF195AB)
NO
CODE-NO
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
2
2-1
2-2
2-3
2-4
3
4
5
6
7
7-1
7-2
8
9
10
DA91-02888A
DA61-03769A
6001-001377
6002-001120
6009-001475
DA61-02383E
DA61-03212A
DA63-40294A
DA97-07896A
DA64-03069A
DA67-02391A
DA67-02392A
6002-000215
DA97-07668A
6002-000468
DA61-02984A
DA64-01985A
DA97-07681A
DA63-05042A
DA63-05050A
DA63-05131A
DA63-05035A
DA63-05036A
PART NAME
ASSY DOOR FOAM REF R
MAGNET
SCREW-MACHINE
SCREW-TAPPING
SCREW-SPECIAL
SUPPORT-DOOR CLOSE
STOPPER-DOOR L
GROMMET-STOPPER
ASSY HANDLE-BAR REF
HANDLE BAR REF
CAP HANDLE REF UPP
CAP HANDLE REF LOW
SCREW-TAPPING
ASSY-GASKET DOOR REF
SCREW-TAPPING
FIXER HANDLE
MASCOT
ASSY GUARD-DAIRY
GUARD-DAIRY
COVER-GUARD DAIRY
GUARD REF-UPP
GUARD REF-MID
GUARD REF-LOW
SPEC
HERMES,-,5x7x18,-,-,1200Gauss
TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,FH,+,1,M4,L18,ZPC(WHT),SWRCH18A
FH,+,-,M5,L25(15.5),PASS,STS304,1,AW-PJT,POM,-,-,-,CREAMY STS,AW-PJT,SHP1,T2.9,-,-,-,T3XW8XL8,NR,-,-,-,-,-,-,BLK
NW2-FDR,-,-,-,-,-,MATURE BLACK,NW2-FDR,AL,T1.2,-,777,-,MATURE BLACK,COATING
NW2-FDR,ABS,I BLACK
NW2-FDR,ABS,I BLACK
TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,NW2-FDR,BLACK,-,PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,A-TOP 06,POM,-,NTR,SBS,AL,T1.6,-,L90,Fixing-type,Siver,forging
NW2-FDR,PP,COOL WHITE,SC-02740R
NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R)
NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)
91
QUAN
TITY
1
1
1
1
2
1
1
1
2
1
1
1
2
1
4
2
1
1
1
1
1
1
1
REMARK
6. PCB DIAGRAM
6-1) PCB L ayout with part position (Main Board)
1. DC12V,5V, & GND are supplied from SMPS PCB.
2. FAN MOTOR driving part : Supply the power from 8.3V~12V to motor according to the motor type (F,R,C,ICE).
3. EEPROM : Save and record every kinds of data.
4. Transmit inputted signals from every sensor into MICOM after eliminate the noise.
5. Departure part : Generate the CLOCK which needs to conrol MICOM program RESET control circuit part :
Initialize the program by sensing power ON/OFF.
6. BUZZER Circuit
7. PLC Input / Output
- PLC (Power Line communication)
* Option(PLC module is not inserted unless specified occasion.)
8. Operate ICE-MAKER, supply power to MOTOR, and sense the variation of switch.
9. Display driving part : Display LED & detect KEY state.
10. Relay part which controls AC load : Operate by receiving the driving signals of MICOM through Sink IC.
11. Connector part : Connect AC load.
12. DIODE option setting part : Set the option
13. Inverter Control part
92
PCB DIAGRAM
6-2) Connector Layout with part position (Main Board)
CN90 - Ice Maker
~
: OPEN
: OPEN
: Sensor
: Test Switch
: Full Switch
: Horizontal Switch
:
CN76 - BLDC Motor
: C-FAN signal input volt
: F-FAN signal input volt
: R-FAN signal input volt
: C-FAN operation signal
: F-FAN operation signal
: R-FAN operation signal
:
CN31 - Sensor
: Ambient
:
CN30 - Sensor &
Switch
: F-Door Switch
: R-Door Switch
: R-Sensor
: R-DEF-Sensor
: F-Sensor
: F-DEF-Sensor
:
:
CN50
~ : Panel LED Driver
: Display Switch input
:
CN72 - AC LOAD
CN71 - AC LOAD
: COMPRESSOR
: French Heater
: HEATER COMMON
: R-LAMP
: F-LAMP
: COMMON1 LINE(N)
: R-DEF-HEATER
: F-DEF-HEATER
: ICE WATER SOLENOIDE
VALVE
: COMMON2 LINE(L)
93
CN10 - AC INPUT
: COMMON2 LINE(L)
: COMMON1 LINE(N)
7. Wiring Diagram
94
8. Schematic Diagram
8-1) Refrigerator Block Diagram
95
SchematicDiagram
8-2) Main
96
272, Oseon-Dong, Gwangsan-Gu,
Gwangju-City, Korea, 506-253
TEL : 82-62-950-6193, 6896
FAX : 82-62-950-6829
- This Service Manual is a property of Samsung Electronics Co., Ltd.
Any unauthorized use of Manual can be punished under applicable
International or domestic law.
© Samsung Electronics Co., Ltd.
Refrigerator Division 2008.08
Printed in Korea