advertisement
Smart Home Controller
User Manual
V1.0.1
Catalogue
1. Product
.....................................................
......
..................
2
2
.
Product description
Wiring
..............................................................
3
......................................................
......
.................
3
Application
......
....
............................
......
.........
......
.........
4
3. Local setting and operation
...........
.....
.....................................
5
Software loading
..........................................
......
...................
5
WiFi connection
................................................
......
.............
5
Local ID setting
...............................................
......
..............
6
Appliance Adding
...................... .... .................................
7
Appliance Editing
Scenarios mode
..............................................................
9
..................................................................
9
Timer Setting
......................................................................
11
4
.
Local Operation
...................................................................
13
5
.
Remote Setting
...........................................
........
.................
14
Home routers parameter Settings
............................................
14
Smart Home Controller parameter Settting
................................
17
Regional Account Settings
Remote Video Monitor
..................
.....
...............................
24
...........................................................
25
Product Introduction
............................................................
26
1
Product Introduction
AC407-02 Smart Home controller
Convenient High quality
Compatible More Powerful
Application:
Hotel room , office building, Lobby, villa and other entertainment places
Products Specification
switch with touch screen, wireless switch, LED, dimmer, IP camera, motorized cloth rack, IR controller converter etc.
mode. Etc.
appliances, remote all of your worries.
Parameters
Product
name
Voltage
Smart home
DC5V
Working current
≤1A
Working temp
IP
- 20 ℃~+55℃
192
.
168
.
2
.
1
User admin
Pass word
Admin9999
The quantity of equipment
≤60
Software application
Panel computer
Smart phone
2
2、
Wiring
2
.1 Wiring Instruction
2
.2 Application
Garage door
Realize home intelligent control through the intelligent mobile phone and Ipad wireless equipment conditioning
Camera
Rolling shutters
5VDC
+
Updating interface
RS485
①② ③ ④ ⑤ ⑥ ⑦⑧
①② ③④
Empty
⑤ ⑥
Earth
⑦RS485_A
LED indicator
Antenna
Rest key
Dry contact
① ② ③ ④
1, Manual STOP
2.Manual Down
3.Manual UP
4.Common
3
Lamp
TV
Owning
WiFi
Internet
Level 1 router
WiFi
4
Curtain
3
、Setting and operation for local control
*Ipad for example
3.1
Local setting for centra control
Apple ISO system,please visit Apple store online to download the software
Android system,please visit AOK website www.aoksz.com "techinical support"
"download center" to download the software
3.2
WiFi connection
①
Choose “setting” ico
3
.3 Local ID Setting
Please make sure you had connected with WiFi
下拉可选择区域账号
3.3.1 Choose Ico, launch the software.
3.3
.2 Enter into login system,
login then to set
② Connect with “Smart” WiFi in the “wireless LAN”
③ input WiFi pass code,default:88888888(eight8)
5
3.3
.3 Choose “set”, enter into set system
3.3.4 Open “Superuser “, then choose
“regional information”
PS: each left button stands for: refresh, mode setting, appliances setting, alarm, timing setting, software setting
6
Regional description within 7 chinese or 22 letters
For remote login
ID and pass code please use successfully registered in the following conter control
For local login
For remote login ID and pass code please use successfully registered in the following conter control
3.3.5 Fill the “host addr.” “HPI” and other related information, after preservation ,
Turn to “Back”
3.4 Appliance
editing
3.3.6 Local ID set successfully, choose
“Back” turn to main interface
Select the corresponding manufacture
Define the Appliance
3
.4.3 Please choose ico to add appliances.
For example add light
3
.4.4 Choose manufacturer, define the
product name. SHomeA is default, fit for all kinds of A-OK products, for other appliances, please choose SHome
3.4.1 Enter into login screen, choose local ID to login in
7
3.4.2 Please choose “device” ico to add
new appliance
3
.4.5
Appliances added successfully, as illustrated.
3.4.6 Appliances add as above, as illustrated
8
3
.5 Appliances edit
3.5.1
Keep press the appliance ico till pop up the setting dialog box
3.6 Scenarios mode
3.5.2 Setting or deleting appliances, choose “OK”
3.6.3 Choose appliance ico,like “Roller Blinds”
Back
Deleting single appliance
Deleting
All appliances
3.6.4 Choose “OK”
Leaving Mode
3.6.1 Choose “mode” setting ico.
9
3.6.2 Keep press “Leaving Mode” to set
(other mode setting is the same)
3.6.5 “Roller Blinds” added successfully,
Choose open or close under the mode
10
3.6.6 The same way for other ico setting, press to save all settings, as above illustrated
3.7 Timing setting
Support 20 group, The concrete Command of the appointed appliances carries out in the appointed time, such as: “Curtain motor” open at every
7:00 a.m, setting as following:
3.7.1 Choose setting ico
3.7.2 Choose one of the icos to set a timer
3.7.5 Curtain motor add successfully,
Choose “Open” or “Close”, choose to set timer
3.7.6 Choose expected time and week,
Selected then turn “Back”
3.7.3 Choose the required appliance, like “Curtain motor”
11
3.7.4 Choose “OK” 3.7.7 The same like above method to add new appliances, choose ico
3.7.8 Choose “OK”, timer setting successfully
12
4. Local operation of the centra control
4.1 Curtain motor control
Take some of the appliances’ setting for example, others the same
Program
Change state
Back
5、Host Remote Setting
5.1 . Home router parameter setting
5.1.1 Connecting home router through WiFi, open the browser, type into the IP address in the address bar(eg: 192.168.1.1), as following:(the router setting instruction use LEIKE router interface's )
4.1
.1 C hoose curtain motor Ico
4.2 TV
Close the curtain motor
Open the curtain motor
Stop
4.1.2 Program the curtain motor
Use for remote control and PROG
Available for switching to
STB
Leaning
AV/IV function
① Connect with your home WiFi ②
Select the browser ico
③
Input your home router IP
:192.168.1.1
5.1.2 Enter the router's user name and pass code to access into the router
4.2.1 Choose LCD TV
13
4.2.2 PROG LCD TV
14
5.1.3 Enter into “Security Settings ” page, like following, please record the following information :
“SSID”(the router WiFi name) “Security mode ” “Encryption Rule” “Secret key”
(The pass code for connecting with WiFi) (The following information of some routers appear in basic setting and security sedtting )
Record the SSID
Record the channel
Wireless security setting
5.1.4 Wireless Settings: enter into wireless setting interface, record following parameter:
5.1.5 Forwarding rule setting: enter into forwarding interface, choose virtual server .
Enter into the following interface after click “Add a new entry”:
When set server port number , the port should be the same as host's, the best range will be 9000-9600, recommended to use 9000, Should this port already be occupied, such as 9001, 9002, 9003...
IP for forwarding(IP for host outer net), recommended is to choose unused IP, avoid the IP confliction when use, the IP of the host is fixed, will be used in the following contra control setting
Custom rule
The IP for host'outer setting
The port should be the same as host's, the best range will be 9000-9600
5.1.6 Choose 'SAVE”and then remind “set successfully!”
Record security mode
Record encryption mode
Record the pass code of Router
15 16
5.2
The parameter setting of the host
Apple ISO system, please visit Apple store online to download the software
Android system, please visit our website to download the software
5.2.1P
ower on the host, Connect with WiFi for the IPad, default pass code: 88888888
① Choose "Setting” ico
② Connect with "Smart" WiFi
③
Input WiFi default pass code:
88888888(eight 8)
5.2 .2 Login into the main setting interface: open the browser, input default IP at address bar:192.168.2.1. Press Enter. User name: admin, pass code: Admin9999(Case sensitive),
Pass code can be changed in the following “Wireless” item of the centra control setting.
② Input IP:192.168.2.1
①
Select the browser ico
17
③
Input the login pass code.
User name: admin
Pass code: Admin9999
5.2.3 Trunk Setting :once finish can connect with internet
①
Choose the router WiFi in “Refresh the list to access points ”, the SSID, channel, encryption will be updated and uploaded automatically, you only need to input the wireless pass code. Press “Apply”, the host will restart, starting completed, please connect the host again.
The Router'SSID
The Router'MAC
The Router'Channel
The Router'encryption mode
The Router'WiFi pass code
Choose WiFi for the target router, the related information will be uploaded on above trunk setting, pass code should be set manually.
Central control set successfully!
②
Tips appear if the trunk set successfully
Network testing: Trunk setting finished, please connect WiFi of the host, The browser is workable means the trunk set successfully, otherwise means failed, please check related settings.
18
6.2.4 Outer net setting: enter into the host outer net setting, IP setting: input the IP address(the router's fixed IP) set in the forwarding rule earlier, Subnet mask:
255.255.255.0, The router's loading IP will be the default gateway, then press “Apply”
Outer net setting interface
The IP of forwarding rule setting
Press 'default'
Same to the Router'
5.2.5 Wireless setting: Setting for the host SSID, Channel, encryption and pass code, then press Enter.
Wireless
Host'SSID
Same to the router
Host'SSID code
Outer net of the host set successfully!
19
The host wireless parameter set successfully!
The host off after 10s and then restart ,input the host IP:192.168.2.1,and then login
20
5.2
.6
Advanced Setting: Port Mirroring setting, means open the external network access port for the host
Advanced
Revisable setting host'login code
The port of the router'forwarding rule setting
5.2.7 Intranet setting: the centra control is : 192.168.2.1, others as default, then press “Apply”
Intranet setting interface
The host'gateway
As default
As default
21
Intranet parameter set successfully!
If the default IP of host'gateway is revised,turn off the host after 10s and then restart .
input the new IP and then login the host.
22
5.2
.8
Register: input information, register in the server for outer net control and remote control
Register
ID and pass code are made up of character and figure .
The first is character.
Input Chinese name
5.5 Centra control reginal ID setting
First please make sure the net of your mobile/ tablet PC is connected, if not please check the set between the router and centra control is correct.
Register successfully!
After registering, the remote control can be fulfilled by mobile phone.
23
5.3.1 Input the browser address for checking,
make sure the net is connected, if not please
check the setting between router and centra control is correct.
5.3.2 Enter into the software setting interface,
choose reginal information in the power user.
Input the ID and pass code of host
Camera pass code
5.3.3 Input the ID and pass code set earlier for remote control, back to login interface after saving.
24
5.3.4 Please check the remote when remote control required.
5.4
Remote Video Surveillance requirements
1. Able to login remotely
2. Need camera support
5.4.1 add Video appliances 5.4.2 IP and parameter of the video pass code setting, Choose “OK”
Camera No
Video name
Centra control IP
Video pass code
6
. Trouble and slove method
Troubles
Control host connect with the power,but can not work normally,smoking or bursting
When you at home use phone or copmuter to control the control host by local WiFi but no reaction
Trouble analysis Solve method
Use the wrong transformer Please use the original standard
DC5V/1A transformer a.connect to the wrong WiFi b.far away from the control host, the WiFi signal is very weak c.when you set the control host, you a.connect with the correct control host WiFi b.avoid from the wall or building did not disconnect the power and floor or obstacle restart the control host c.restart the control host
Failed connect internet via the control host WiFi
Control host "register" set failed a.control host"Trunk Setting" set failed; b.the router has not set interface ; forwarding c.the router has the safe limit to internet.
a.can not on internet via the control host WiFi b.already registered, but repeat register cause the register was locked a.please check the control host
"trunk setting"set parameter b.set the router forwarding interface c.let router allow the control host surf internet a. connect the control host
WiFi to the internet b.please contact the service supplier to release
Control host can not login via long-distance control and can not visit the long-distance control
Household electronical equipment can not program a. the control host power off a.let the control host work normally b.long-distance user name and b.type the registed user name and password incorrect password c.register many times, the user c.ask the service supplier to release d.ensure the control host is work d. the control host is not connect to under the first-level router e. control host long-distance set
incorrect parameter
When you add the home use electronic equipment, choose the incorrect company name
"Shome-A" is only used for AOK series products,other household electronical equipment please choose the "Shome"
The control host reset failed Press " reset " button very short time
Please press the "reset" button for more than 7 seconds
5.4
.3 Video appliances added successfully, open and into
5.4
.4 Video monitoring effects
25
26
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project